Manual Aero TP538
Manual Aero TP538
Manual Aero TP538
QC pass certificate
External sensor
Operation
1. You could press this button to power on/off
your thermostat
Features 2. Time setting:Press button to set min/hour/week
◆Simple installation 3. Manual/program setting:
a. manual mode: Press button to select manual
◆Acrylic face plate mode.When you Choose manual mode.The
◆Large, backlit display symbol will show the left corner of LCD,Press
to set the desired temperature.
◆Sleek, contemporary design
b.Program Mode:press button to select program
◆Elegant chrome frame mode.When you choose this mode.The symbol
will show on LCD,press button above 5seconds to
◆Feather touch control panel
set the desired (5+1+1)six periods time and temp
◆5+1+1 six period per day programming c.Temperary mode:During program mode.If you
◆Simple, one-touch temperature control over-ride . need change temp.The button will show on
LCD.The pre-program setting will return in next
◆Pre-set temperatures maintained within +/- 1°C period
◆Internal and external sensors allow control of 4. Child lock set:Press an hold the button
above 5seconds to lock/unlock your thermostat
both air and/or floor temperatures 5.Programm go back factory setting:Press button
◆Suitable for installation in a standard single pattress above 5 seconds to enter program mode. Press
and hold the button above 5seconds when
box or European 60mm round box the "def"flash in the LCD.It is go back factory
◆WIFI/ZIGBEE/MODBUS communication optional settings sucessful
Dimension Program Setting
When power on,Long press into programmable.
60mm
Press to change the different items.
86mm 49.5mm 49mm
Press or to set the relative values.
63mm 14mm
Temperature adjusting
(“Mon-Fri”,”Sat”,”Sun”, is “5+1+1” programmable mode,
every mode has two times zones and a time
temperature setting)
Time display
Set
Wiring Diagram Time
Temp
Time Set
Temp
Time Set
Temp
Open Close
Load 16A
SENSOR MODBUS Period 6 22:00 16 ℃ 22:00 16 ℃ 22:00 16 ℃
Power
R25°C=10KΩ + -
N1 N L L1
Gas Boiler
Configuration Menu
Long press button above 5sec to enter this menu when power
off .During this menu,short press to change parameters
Press to comfirm the setting
High temperature
9 protection setting 25℃-70℃ 4 5℃
Anti-freez
A tempreature range
2-10℃ 5℃
Anti-Freez 0
B 0:Off 1:ON
protection