This document is an exam for an Advanced Electric Drives course, consisting of 5 questions covering various topics:
1. Torque estimation in closed loop control of electric drives, control of current source inverters, and PWM converters.
2. Selected harmonic elimination, block diagrams of electric drives, and operation of H-bridge drives.
3. Advantages of vector control, comparison of VSI and CSI drives, and reference frame theory.
4. Different permanent magnet motors, block diagrams of synchronous motor drives, and direct torque control of synchronous motors.
5. Topologies of SRM drives, PWM modules in DSPs, and space vector modulation with switching vectors and sectors
This document is an exam for an Advanced Electric Drives course, consisting of 5 questions covering various topics:
1. Torque estimation in closed loop control of electric drives, control of current source inverters, and PWM converters.
2. Selected harmonic elimination, block diagrams of electric drives, and operation of H-bridge drives.
3. Advantages of vector control, comparison of VSI and CSI drives, and reference frame theory.
4. Different permanent magnet motors, block diagrams of synchronous motor drives, and direct torque control of synchronous motors.
5. Topologies of SRM drives, PWM modules in DSPs, and space vector modulation with switching vectors and sectors
This document is an exam for an Advanced Electric Drives course, consisting of 5 questions covering various topics:
1. Torque estimation in closed loop control of electric drives, control of current source inverters, and PWM converters.
2. Selected harmonic elimination, block diagrams of electric drives, and operation of H-bridge drives.
3. Advantages of vector control, comparison of VSI and CSI drives, and reference frame theory.
4. Different permanent magnet motors, block diagrams of synchronous motor drives, and direct torque control of synchronous motors.
5. Topologies of SRM drives, PWM modules in DSPs, and space vector modulation with switching vectors and sectors
This document is an exam for an Advanced Electric Drives course, consisting of 5 questions covering various topics:
1. Torque estimation in closed loop control of electric drives, control of current source inverters, and PWM converters.
2. Selected harmonic elimination, block diagrams of electric drives, and operation of H-bridge drives.
3. Advantages of vector control, comparison of VSI and CSI drives, and reference frame theory.
4. Different permanent magnet motors, block diagrams of synchronous motor drives, and direct torque control of synchronous motors.
5. Topologies of SRM drives, PWM modules in DSPs, and space vector modulation with switching vectors and sectors
BE - SEMESTER–VII (NEW) EXAMINATION – WINTER 2021 Subject Code:3170916 Date:15/12/2021 Subject Name:Advanced Electric Drives Time:10:30 AM TO 01:00 PM Total Marks: 70 Instructions: 1. Attempt all questions. 2. Make suitable assumptions wherever necessary. 3. Figures to the right indicate full marks. 4. Simple and non-programmable scientific calculators are allowed. MARKS Q.1 (a) State in brief, how torque is estimated in closed loop control of electric drives. 03 (b) Explain in brief, the control of Current Source Inverter with necessary diagram. 04 (c) Explain PWM converter as line side rectifier with necessary figure. 07
Q.2 (a) Describe Selected Harmonic Elimination with necessary figure. 03
(b) Draw the block diagram of Electric drive and explain each block in brief. 04 (c) Explain operation of H bridge as a 4-Q drive. 07 OR (c) Draw and explain the equivalent circuit of a single –phase induction machine. 07
Q.3 (a) State advantages of vector control over scalar control. 03
(b) Compare VSI and CSI fed drives. 04 (c) Write a note on Reference-frame theory, and state commonly used reference frames. 07 OR Q.3 (a) Compare DTC and FOC 03 (b) Discuss what will happen if V/f ratio is not kept constant in IM drive. 04 (c) Draw and explain operation of open loop V/f control of Induction motor with PWM 07 voltage fed converter.
Q.4 (a) List different permanent magnet motors. 03
(b) Draw block diagram of synchronous motor drive. 04 (c) Explain direct torque control of synchronous motor. 07 OR Q.4 (a) Draw block diagram for closed loop speed control of SRM. 03 (b) List different control techniques of PMSM. 04 (c) Explain CSI fed synchronous motor drives. 07
Q.5 (a) List various topologies of SRM drives. 03
(b) Discuss PWM module in DSP. 04 (c) State the eight different possible switching vectors in SVM with diagram. Describe 07 sectors in the same. OR Q.5 (a) Draw figure showing construction of any one type of BLDC motor. 03 (b) Write a short note on TMSLF2407 with reference to motion control. 04 (c) State names of some DSPs used in motion control and discuss the use of same. 07 *************