Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    50Hz B TO200B47.5 5

    Uploaded by

    Thu Hiền Nguyễn
    This document provides specifications for a B-series 200B47.5 sewage/wastewater pump with a 7.5kW motor. The pump is submersible and cast iron, with a shrouded two-channel impeller designed to handle solids. It has a 200mm discharge bore and pumps sewage, wastewater, and water carrying solid matters at temperatures from 0 to 40°C. The motor is continuous duty rated, IP68 protection class, and has permanently lubricated ball bearings. It also has double mechanical shaft seals located in an oil chamber to keep the seals running clean.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    50Hz B TO200B47.5 5

    Uploaded by

    Thu Hiền Nguyễn
    18 views4 pages
    This document provides specifications for a B-series 200B47.5 sewage/wastewater pump with a 7.5kW motor. The pump is submersible and cast iron, with a shrouded two-channel impeller designed to handle solids. It has a 200mm discharge bore and pumps sewage, wastewater, and water carrying solid matters at temperatures from 0 to 40°C. The motor is continuous duty rated, IP68 protection class, and has permanently lubricated ball bearings. It also has double mechanical shaft seals located in an oil chamber to keep the seals running clean.

    Original Description:

    Tsurumi

    Original Title

    50Hz_B_TO200B47.5_5

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a B-series 200B47.5 sewage/wastewater pump with a 7.5kW motor. The pump is submersible and cast iron, with a shrouded two-channel impeller designed to handle solids. It has a 200mm discharge bore and pumps sewage, wastewater, and water carrying solid matters at temperatures from 0 to 40°C. The motor is continuous duty rated, IP68 protection class, and has permanently lubricated ball bearings. It also has double mechanical shaft seals located in an oil chamber to keep the seals running clean.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views4 pages

    50Hz B TO200B47.5 5

    Uploaded by

    Thu Hiền Nguyễn
    This document provides specifications for a B-series 200B47.5 sewage/wastewater pump with a 7.5kW motor. The pump is submersible and cast iron, with a shrouded two-channel impeller designed to handle solids. It has a 200mm discharge bore and pumps sewage, wastewater, and water carrying solid matters at temperatures from 0 to 40°C. The motor is continuous duty rated, IP68 protection class, and has permanently lubricated ball bearings. It also has double mechanical shaft seals located in an oil chamber to keep the seals running clean.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Sewage / Wastewater Pumps

    B-series
    SPECIFICATIONS Model 200B47.5
    7.5kW, 3-phase

    Type of Pump Impeller


    Submersible cast iron pump suitable for pumping sewage, Shrouded two-channel impeller for solid-handling design,
    wastewater, storm water, etc. dynamically balanced

    Type of Fluid Solids Passage


    Sewage, wastewater, and water carrying solid matters 50Hz –   80 × 60mm
    60Hz – 100 × 50mm
    Temperature: 0 to 40°C
    (High temperature model available on special request) Cable Entry with Anti-Wicking Block
    Watertight cable entry with strain-relief device. The anti-
    Discharge Bore wicking block prevents water incursion due to capillary
    200mm action should the power cable be damaged or the end
    submerged.
    Motor Output
    7.5kW Bearings
    Permanently lubricated, deep-groove, double-shielded
    Power Supply C3 ball bearings
    Three-phase
    Shaft
    Starting Method 420 stainless steel
    Direct on Line (Star-Delta available on special request)
    Shaft Seal (Mechanical Seal)
    Motor Furnished with a double-face mechanical seal located in
    Continuous-duty rated, dry-type induction motor oil chamber. Both upper and lower seal faces always run
    in a clean environment.
    Insulation Class: F
    Degree of Protection: IP68 Upper Seal Faces: Ceramic + Carbon
    Lower Seal Faces: SiC + SiC
    No. of Poles & Speed (Synchronous Speed)
    4-pole, 1500/1800min-1 (50/60Hz) Oil Seal (Lip Seal)
    Used as a “Dust Seal”, it protects the mechanical seal
    Power Supply Voltages & Rated Currents from abrasive particles.
    50Hz 60Hz
    380V – 16.3A 220V – 27.6A OIL LIFTER (Patented)
    400V – 15.9A 380V – 15.6A Equipped in oil chamber. It forcibly supplies lubricating
    415V – 15.7A 440V – 13.7A oil to the mechanical seal and continues to supply the oil
    to the upper seal faces even if lubricant falls below the
    Power Cable rated volume.
    Sheath: Chloroprene rubber
    Standard Length: 8m Type of Lubricating Oil & Volume
    200 to 600V supply: Turbine Oil (ISO VG32), 5200ml
    1 × 4 × 5.5mm2, O.D. 16.8mm
    Motor Protection Device
    Dry Weight (excluding cable) A circle thermal protector built in the motor housing.
    Free Standing Type: 207kg Directly cuts the motor circuit if excessive heat builds up
    Guide Rail Fitting Type: 212kg or an overcurrent condition occurs in the motor.

    Optional Accessory
    External Leakage Sensor

    35

    You might also like