SOUND PACK/WAVE EXPANSION Install Manual

This manual explains how to import or install SOUND PACK and WAVE EXPANSION on the RD-88.
Read this in conjunction with the RD-88 Owner’s Manual.

Preparing the Sound Files 6. Use the cursor [ ] [ ] buttons to select the tone that you
want to import, and then use the [ENTER] button to add
* If you’re using the USB flash drive for the first time, format it a check mark.
using the RD-88. Instead of using the [ENTER] button, you can also use the [INC]
&“Formatting a USB Flash Drive” (Owner’s Manual) [DEC] buttons to assign check marks.

1. Prepare the sound file that you will add on the RD-88,
and place the file on your computer.
MEMO
Sound files such as SOUND PACK or WAVE EXPANSION can be
obtained via the Roland Cloud.
MEMO
For more about Roland Cloud, refer to the Roland website.
To select or de-select all tones, hold down the [SHIFT] button
&https://www.roland.com/ and press the [INC] [DEC] buttons.
* Please be aware that in some countries or regions, it might not To select or de-select a specific range of tones, press the
be possible to use Roland Cloud at this time. [ENTER] button at the beginning of the range, then at the
end of the range, hold down the [SHIFT] button and press the
2. Connect the USB flash drive to your computer. [ENTER] button.

3. Save the file in the appropriate directory of your USB 7. Press the cursor [>] button.
flash drive.
SOUND PACK (extension: .SDZ): ROLAND/SOUND folder 8. Use the cursor [] [ ] buttons to select the import-
WAVE EXPANSION (extension: .EXZ): Root directory destination tone, and then press the [ENTER] button to
add a check mark.
4. Disconnect the USB flash drive from your computer.
NOTE
55Be aware that the import-destination tone you select will
Adding the Sounds be overwritten.
55An “ * ” is displayed for tones used in scene.
Depending on the sounds that you are adding, perform the steps 55An indication of "NEW" is shown for newly imported tones.
described in “Importing a SOUND PACK” or “Installing a WAVE
EXPANSION” (p. 2). 55If the import-destination has fewer tones than the import-
source, not all of the selected tones will be imported.
55The number of tones is shown in the upper right of the
Importing a SOUND PACK screen.
Number of import-destination/import-source tones
1. Connect the USB flash drive in which you saved the
sound file to the RD-88.
&“Preparing the Sound Files” (p. 1)

2. Press the [MENU] button.

3. Use the cursor [ ] [ ] buttons to select “UTILITY,” and
then press the [ENTER] button. 55If there is a tone named “INITIAL TONE,” it is automatically
selected as the import-destination tone.
4. Use the cursor [ ] [ ] buttons to select “IMPORT TONE,” If you want to keep that tone, clear the check mark.
and then press the [ENTER] button.

5. Use the cursor [ ] [ ] buttons to select the file that 9. Press the cursor [>] button.
contains the tones that you want to import, and then
press the cursor [>] button. A confirmation screen appears.
If you decide to cancel, press the [EXIT] button.
MEMO
The first time you import, the user license registration screen
appears.
To execute, use the cursor [>] button to select “OK,” and then
press the [ENTER] button.
NOTE
Drum kit tones cannot be imported.
RD-88
© 2020 Roland Corporation
1
SOUND PACK/WAVE EXPANSION Install Manual

10. To execute, use the cursor [>] button to select “OK,” and Uninstalling a WAVE EXPANSION
then press the [ENTER] button.
When import is completed, the message “Import Tone If there is insufficient free memory space, uninstalling a previously
Completed!” appears. installed WAVE EXPANSION will let you install a new WAVE
EXPANSION.
NOTE
Never turn off the power or disconnect the USB flash drive 1. While pressing the [ENTER] button, turn on the power.
during a process, such as while the “Processing…” display is
shown. The EXPANSION top screen appears.

2. Use the cursor [ ] [ ] buttons to select the file that you

Installing a WAVE EXPANSION want to uninstall, and then press the cursor [<] button to
move to the uninstallation screen.
1. While pressing the [ENTER] button, turn on the power. A confirmation screen appears.
The EXPANSION top screen appears. If you decide to cancel, press the [EXIT] button.
When the unit is shipped from the factory, EXZ001 is 3. To execute, use the cursor [>] button to select “OK,” and
preinstalled. then press the [ENTER] button.
List of installed WAVE EXPANSION Used capacity

User License
EMPTY:
New files can be installed.

FULL:
SOUND PACK and WAVE EXPANSION are associated with the user
New files cannot be installed.
licenses of the user who downloaded them.
In order to install, you must create SOUND PACK or WAVE EXPANSION that have differing user licenses
free space. cannot be imported into the same RD-88.
&“Uninstalling a WAVE User A User A User B
EXPANSION” (p. 2)
to Uninstall to Install
(cursor [<] button) (cursor [>] button) A EXZ002
A EXZ005
B EXZ005

2. Press the cursor [>] button to move to the installation

screen.

3. Use the cursor [ ] [ ] buttons to select the file that you

want to install, and then press the cursor [>] button.
A
A confirmation screen appears.
If you decide to cancel, press the [EXIT] button. If you want to import or install SOUND PACK and WAVE EXPANSION
that has a different user license than what is already registered to
MEMO this RD-88 unit, you must initialize the user licenses by performing
The first time you install, the user license registration screen the procedure described in “Initializing the User Licenses” (p. 3).
appears. User A User B
To execute, use the cursor [>] button to select “OK,” and then
A B
press the [ENTER] button. EXZ005 EXZ005

4. To execute , use the cursor [>] button to select “OK,” and

then press the [ENTER] button.

Initialize

2
 SOUND PACK/WAVE EXPANSION Install Manual

Initializing the User Licenses Error Message

If you’ve initialized the user licenses, you’ll be able to import or Message Action
install SOUND PACK and WAVE EXPANSION that you downloaded
This appears if the USB flash drive does not contain
using a new user license. a WAVE EXPANSION file.
Expansion File Not
NOTE Found! Check that the file is correctly saved, and that the
55Installed WAVE EXPANSION are deleted. file extension is “.exz.”
This appears if the selected sound file is not
55EXZ001 is not deleted even if you perform this operation. compatible with the RD-88, or if the file is
55Never turn off the power or disconnect the USB flash drive damaged.
Incorrect File!
during a process, such as while the “Processing…” display is Check the models that are listed as compatible
shown. for the file you downloaded, and try downloading
again.
This appears if the selected sound file is associated
with a different user license.
1. Press the [MENU] button. Incorrect License! Please
Remove License To install, you must either obtain a file that has the
same user license as the currently-installed sound
2. Use the cursor [ ] [ ] buttons to select “UTILITY,” and file, or initialize the user licenses.
then press the [ENTER] button. This appears if there is insufficient free space for
installation.
Expansion Memory Full!
3. Use the cursor [ ] [ ] buttons to select “FACTORY RESET,” To install, you must uninstall a currently-installed to
create free space.
and then press the [ENTER] button.
It has already been This appears if the selected file is already installed.
If sound packs or wave expansions were imported or installed, installed There is no need to reinstall.
an item selection screen appears.

4. Use the cursor [ ] [ ] buttons to select “Remove License,”

and press the [ENTER] button to add a check mark in the
check box.
Pressing the [ENTER] button once again clears the check mark.

NOTE
55If the “Reset User Data” check box is checked, all user data is
initialized. If you want to keep the user data, clear this check
box.
55If no sound pack or wave expansion has been imported or
installed, the item selection screen does not appear; the user
data initialization confirmation screen appears. In this case,
there is no need to initialize the user license, so press the [EXIT]
button to return to the previous screen.

5. Press the cursor [>] button.

A confirmation message appears.
If you decide to cancel, press the [EXIT] button.

6. To execute, press the [ENTER] button.

When the restore operation is finished, the screen indicates
“Completed. Turn off power.”

7. Turn the power of the RD-88 off and then on again.

02 3