Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    129 M 97071 Eng

    Uploaded by

    ondemandprint
    1. The document provides installation instructions for installing a Large Capacity Tray (LCT) on a Konica 7055/7065,7060/7150 machine. 2. The procedure involves cutting covers, removing screws, connecting connectors, and adjusting the LCT position for proper alignment and operation. 3. Adjustments are made to ensure the LCT is level with the main body and that the actuator engages correctly with the interlock switch window.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    129 M 97071 Eng

    Uploaded by

    ondemandprint
    24 views4 pages
    1. The document provides installation instructions for installing a Large Capacity Tray (LCT) on a Konica 7055/7065,7060/7150 machine. 2. The procedure involves cutting covers, removing screws, connecting connectors, and adjusting the LCT position for proper alignment and operation. 3. Adjustments are made to ensure the LCT is level with the main body and that the actuator engages correctly with the interlock switch window.

    Original Title

    129m97071eng

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides installation instructions for installing a Large Capacity Tray (LCT) on a Konica 7055/7065,7060/7150 machine. 2. The procedure involves cutting covers, removing screws, connecting connectors, and adjusting the LCT position for proper alignment and operation. 3. Adjustments are made to ensure the LCT is level with the main body and that the actuator engages correctly with the interlock switch window.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views4 pages

    129 M 97071 Eng

    Uploaded by

    ondemandprint
    1. The document provides installation instructions for installing a Large Capacity Tray (LCT) on a Konica 7055/7065,7060/7150 machine. 2. The procedure involves cutting covers, removing screws, connecting connectors, and adjusting the LCT position for proper alignment and operation. 3. Adjustments are made to ensure the LCT is level with the main body and that the actuator engages correctly with the interlock switch window.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    LT-352 INSTALLATION PROCEDURE

    Large Capacity Tray

    Applied Machine: Konica 7055/7065,7060/7150

    I. Accessory parts III. Installation procedure


    1. Using a nipper, cut out the paper feeding cover on
    No. Name Shape Q’ty
    the right side of the main body to make a hole.
    1 Lower cover
    (front) Caution:
    1 • Carefully cut off the cover so that the projections
    made around the hole should not exceed 1mm.
    2 Lower cover • When using a nipper, be careful not to damage
    (right) the guide plate inside the paper feeding cover.
    1 (Damaging the guide plate may cause paper
    jam.)
    3 LCT installation
    plate 1
    Within 1mm Paper feeding cover

    4 TP screw
    (M5x8)
    2
    Within 1mm
    5 TP screw
    (M4x14) 4

    6 SEMS II screw
    (M4x6) 1

    7 TP screw
    (black) 4 2. Remove the lower right side cover of the main body,
    (M3x6) and remove the two screws to remove the con-
    nector cover.
    8 TP screw
    3. Using nipper, cut off the three portions illustrated
    (M3x6) 1 below.

    Lower right side cover


    of the main body
    II. Preparation Connector cover

    1. Be sure to turn OFF the power switch of the main 2 screws


    body before starting this operation.
    2. DO NOT turn ON the power switch until all the
    locking materials are removed from the LCT.

    E-1 129M97071
    4. Install the LCT installation plate with TP screws Caution:
    (M4x14: 4pcs.). Tighten the screws in the order of • When closing the top cover with the LCT laid
    q to w. down, be careful that the paper feed roller is not
    caught.
    • Carefully set up the LCT so as not to deform the
    lower covers (front and right).
    TP screw M4x14: 4 pcs. 10. Remove the two rail fixing screws (front and rear)
    of the LCT.
    w q

    LCT installation plate

    5. Take out the LCT from the packing carton with


    lower cushions attached. LCT (rear) LCT (front)
    6. Remove the right side plate of LCT.
    7. Remove the 4 screws to remove the locking plate.
    Peel off the four lock tapes and remove the two Rail fixing screw
    locking pieces.
    Caution:
    After pushing down the two locking pieces in the 11. Remove the cord fixing plate on the right side of
    direction of the locking plate, remove them. the main body by removing two TP screws
    (M4x6).
    Locking plate

    [Right side
    of the main body]

    Locking piece Screws: 4 pcs.

    TP screw M4x6: 2 pcs.

    Cord fixing plate


    Locking plate of the main body

    Lock tapes: 4
    Locking
    piece

    12. Connect the three connectors on LCT cord fixing


    plate to those on the cord fixing plate of the main
    body , and fix those two cord fixing plates with a
    8. Reinstall the right side plate of LCT. TP screw (M3x6).
    9. Install the lower covers (front and right) with black
    TP screws (M3x6: 2 pcs. each)
    TP screw (black) M3x6: 2 pcs.
    Connectors of LCT
    Cord fixing plate of the main body

    TP screw M3x6
    Lower cover (right)

    TP screw (black) Cord of LCT


    M3x6: 2 pcs.
    LCT cord fixing plate

    Lower cover (front)

    E-2
    13. Fit the cord fixing plates to the main body with IV. Adjustment
    two TP screws (M4x6) removed in step 7, and fix
    the earth cord with a SEMS II screw (M4x6). [Adjustment for machine inclination]
    Proceed the following adjustment so that the gap be-
    tween LCT and main body should be equal from the
    top through the bottom, and that the LCT could be
    easily locked to the main body.
    [Right side of 1. Draw the LCT apart from the main body until the
    the main body] height adjustment nut appears.

    Cord fixing plate

    TP screw M4x6: 2 pcs.

    LCT

    SEMS II screw M4x6


    Earth cord

    Height adjustment nut

    14. Install the LCT to the main body with a TP screw


    (M5x8) each on the two joints of the LCT, placing
    the positioning screw attached to the front joint
    into the hole on the frame of main body. 2. With the nut loosened, turn the caster axis by us-
    Caution: ing a screwdriver to adjust the inclination in front
    Tighten the screws while pressing down the joints and rear or right and left.
    of the LCT. 3. Adjust also the height of front and rear casters
    of the LCT so that the actuator of the LCT instal-
    lation plate installed to the main body should be
    inserted in the center of the LCT interlock SW
    window.
    TP screw M5x8
    [Main body]

    Actuator of the LCT installation plate


    TP screw M5x8 Positioning screw
    LCT interlock SW window

    [LCT]

    15. Reinstall the lower right side cover of the main


    body.

    E-3
    Caution: [Adjustment for centering error]
    Adjust and verify that the gap between the main 1. Turn ON the power switch while pressing Ten keys
    body and LCT should fall within 5 ± 1 mm from the c and n simultaneously.
    top through the bottom. 2. Select v Test pattern output mode.
    3. Enter 16 using Ten keys, and touch the keys in
    the order of “SET” and “Copy Screen”.
    4. Select “Tray 5” and press START PRINT button to
    make a sheet of copy.
    5. Check if the centering error occurs. (Standard:
    1mm or less)
    6. When the centering error is found, follow the ad-
    justment procedure described below.
    <For the error over 2mm>
    Open the upper cover, loosen the 8 screws illus-
    trated below, and change the position of the side
    guides until the error is improved.
    (In this case, move the front and rear side guides
    equally in the length by referring to the stamps on
    the reinforcing plates (front/rear) of the side guides
    4. When the adjustment is completed, tighten the nut. or on the bottom plate.)
    5. Check that the LCT is securely locked to the main
    Upper cover
    body.

    Screw: 4 pcs. Screw: 4 pcs.

    <For the error less than 2mm>


    1. Turn ON the power switch while pressing Ten keys
    c and n simultaneously.
    2. Select x Image adjustment.
    3. Select b Centering adjustment.
    4. Select z Centering adjustment (Front).
    5. Select 400dpi .
    6. Touch the arrow key and select “Tray 5”.
    7. Change the data and touch the keys in the order
    of “SET” and “Copy Screen”.
    Range available to be entered: –32 ~ +32
    1 step = 0.06mm
    8. Press START PRINT button to make a sheet of
    copy.
    9. Check if the centering error occurs.
    For readjusting the error, press C button while
    pressing P button.
    10. Repeat the steps 7 to 9 until the error is improved.

    E-4

    You might also like