Asme B18.24-2015

ASME B18.
24-2015
[Revision of ASME B18.24-2004 (R2011)]
Part Identifying
Number (PIN) Code
System Standard for
B18 Fastener Products
A N A M E R I C A N N AT I O N A L STA N DA R D
ASME B18.24-2015
[Revision of ASME B18.24-2004 (R2011)]
Part Identifying
Number (PIN) Code
System Standard for
B18 Fastener Products
A N A M E R I C A N N AT I O N A L S TA N D A R D
Two Park Avenue • New York, NY • 10016 USA

Date of Issuance: November 20, 2015
This Standard will be revised when the Society approves the issuance of a new edition.
ASME issues written replies to inquiries concerning interpretations of technical aspects

of this Standard. Interpretations are published on the Committee Web page and under
go.asme.org/InterpsDatabase. Periodically certain actions of the ASME B18 Committee may be
published as Cases. Cases are published on the ASME Web site under the B18 Committee Page at
go.asme.org/B18committee as they are issued.
Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to
provide corrections to incorrectly published items, or to correct typographical or grammatical errors
in codes and standards. Such errata shall be used on the date posted.
The B18 Committee Page can be found at go.asme.org/B18committee. There is an option available
to automatically receive an e-mail notification when errata are posted to a particular code or standard.
This option can be found on the appropriate Committee Page after selecting “Errata" in the "Publication
Information" section.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for American National
Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from
competent and concerned interests have had an opportunity to participate. The proposed code or standard was made
available for public review and comment that provides an opportunity for additional public input from industry, academia,
regulatory agencies, and the public-at-large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in connection with any
items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for
infringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expressly
advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is
entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as
government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established
ASME procedures and policies, which precludes the issuance of interpretations by individuals.
No part of this document may be reproduced in any form,

in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers

Two Park Avenue, New York, NY 10016-5990
Copyright © 2015 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All rights reserved
Printed in U.S.A.
CONTENTS
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Correspondence With the B18 Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
1 Introductory Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 General Guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 PIN Code Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Tables
1-1 Fastener Family and Type/Base PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2-1 Thread Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2-2 Thread and Point Options for Tapping Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3-1 Inch Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3-2 Inch Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3-3 Metric Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3-4 Metric Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3-5 Miniature Screw Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3-6 Inch Tapping Screw Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3-7 Metric Tapping Screw Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3-8 Inch Hex Socket Head Shoulder Screw Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3-9 Metric Hex Socket Head Shoulder Screw Size . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3-10 Inch Spline Socket Set Screw Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3-11 Inch Trim Head Machine Screw Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3-12 Inch Wood Screw Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3-13 Inch Lag Screw Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3-14 Inch Rivet Size Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3-15 Inch Rivet Size Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3-16 Inch Rivet Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3-17 Inch Rivet Size/Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3-18 Inch Pin Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3-19 Inch Pin Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3-20 Retaining Ring Size Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3-21 Inch Retaining Ring Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3-22 Inch Washer Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3-23 Inch Washer Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3-24 Inch Washer Size 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3-25 Inch Washer Size 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3-26 Metric Washer Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3-27 Metric Washer Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3-28 Metric Key Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3-29 Metric Key Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4-1 Inch Length/Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4-2 Metric Length/Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4-3 Inch Miniature Screw Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4-4 Insert Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4-5 Inch Pin Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4-6 Inch Eyebolt Full Thread Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5-1 Material and Treatment: ASTM Material Specifications . . . . . . . . . . . . . . . . . . 43
5-2 Material and Treatment: UNS Carbon and Alloy Steels . . . . . . . . . . . . . . . . . . 82
5-3 Material and Treatment: UNS Heat and Corrosion Resisting Steels . . . . . . . 88
iii
5-4 Material and Treatment: UNS Nonferrous Materials . . . . . . . . . . . . . . . . . . . . . 93
5-5 Material and Treatment: SAE Material Specifications . . . . . . . . . . . . . . . . . . . . 96
5-6 Material and Treatment: ISO Material Specifications . . . . . . . . . . . . . . . . . . . . . 97
5-7 Material and Treatment: IFI Material Specifications . . . . . . . . . . . . . . . . . . . . . . 98
5-8 Material and Treatment: B18.16.1M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5-9 Material and Treatment: B18.6.6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
6-1 Plating, Coating, and Passivation: Plain, Unfinished . . . . . . . . . . . . . . . . . . . . . 99
6-2 Plating, Coating, and Passivation: ASTM Finish Specifications . . . . . . . . . . . 99
6-3 Plating, Coating, and Passivation: Government Finish Specifications . . . . . 117
6-4 Plating, Coating, and Passivation: SAE Finish Specifications . . . . . . . . . . . . . 117
6-5 Plating, Coating, and Passivation: ISO Finish Specifications . . . . . . . . . . . . . . 118
7-1 Plain: No Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-2 Miscellaneous Features for Externally Threaded Fasteners . . . . . . . . . . . . . . . 120
7-3 General Point Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-4 Features for Metric Flange Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-5 Features for Metric 12-Spline Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-6 Neck Options for Large Rivets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-7 Cotter Pin Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-8 Pin Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-9 SEMs Washer Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-10 Wood Screw Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
7-11 Miscellaneous Features for Socket Head Cap Screws . . . . . . . . . . . . . . . . . . . . . 121
7-12 Self-Locking Elements for Set Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
7-13 Thread Class for Track Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
7-14 Alternate Points for Thumb and Wing Screws (ASME B18.6.8) . . . . . . . . . . . 121
Nonmandatory Appendices
A B18.24.1, B18.24.2, and B18.24.3 PIN Succession Instructions . . . . . . . . . . . . . 123
B B18.24.1, B18.24.2, and B18.24.3 PIN Succession Tables . . . . . . . . . . . . . . . . . . . 128
C Part Identifying Number System for Bent Bolts per ASME B18.31.5 . . . . . . 172
Figures
A-1 Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
C-1 Part Identification Number (PIN) System for Bent Bolts . . . . . . . . . . . . . . . . . 173
Tables
B-1 Fastener Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
B-2 Fastener Type: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
B-3 Fastener Type: Internally Threaded and Nonthreaded . . . . . . . . . . . . . . . . . . . 142
B-4 Thread Series: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
B-5 Thread Series: Internally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
B-6 Inch Size: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
B-7 Inch Size: Internally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
B-8 Metric Size: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
B-9 Metric Size: Internally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
B-10 Inch Miniature Screw Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
B-11 Inch Length: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
B-12 Metric Length: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
B-13 Inch Miniature Screw Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
B-14 Length: Internally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
B-15–B-133 Dimensions/Other Characteristics: Nonthreaded . . . . . . . . . . . . . . . . . . . . . . . . 145
B-134 Material and Treatment A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
B-135 Material and Treatment B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
B-136 Plating, Coating, and Passivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
B-137 Additional Features: Externally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
B-138 Additional Features: Internally Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
B-139 Additional Features: Nonthreaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
B-140 Cross Reference: Table 2-2 Tapping Screw Point AB . . . . . . . . . . . . . . . . . . . . . . 166
iv
B-141 Cross Reference: Table 2-2 Tapping Screw Point B . . . . . . . . . . . . . . . . . . . . . . . 166
B-142 Cross Reference: Table 2-2 Tapping Screw Point BF . . . . . . . . . . . . . . . . . . . . . . 166
B-143 Cross Reference: Table 2-2 Tapping Screw Point BP . . . . . . . . . . . . . . . . . . . . . . 167
B-144 Cross Reference: Table 2-2 Tapping Screw Point BT . . . . . . . . . . . . . . . . . . . . . . 167
B-145 Cross Reference: Table 2-2 Tapping Screw Point C . . . . . . . . . . . . . . . . . . . . . . . 167
B-146 Cross Reference: Table 2-2 Tapping Screw Point D . . . . . . . . . . . . . . . . . . . . . . . 167
B-147 Cross Reference: Table 2-2 Tapping Screw Point F . . . . . . . . . . . . . . . . . . . . . . . 167
B-148 Cross Reference: Table 2-2 Tapping Screw Point G . . . . . . . . . . . . . . . . . . . . . . . 167
B-149 Cross Reference: Table 2-2 Tapping Screw Point T . . . . . . . . . . . . . . . . . . . . . . . 167
B-150 Cross Reference: Table 2-2 Tapping Screw Point U . . . . . . . . . . . . . . . . . . . . . . . 167
B-151 Bridge to Table 3-6 for AB, B, BF, BP, BT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-152 Bridge to Table 3-6 for C, D, F, G, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-153 Bridge to Table 3-7 for AB, B, BF, BT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-154 Bridge to Table 3-7 for D, F, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-155 Bridge to Table 3-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-156 Bridge to Table 3-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-157 Bridge to Table 3-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
B-158 Cross Reference: Table 7-9 Washer Component 1 . . . . . . . . . . . . . . . . . . . . . . . . 167
B-167 Cross Reference: Table 7-9 Washer Component 10 . . . . . . . . . . . . . . . . . . . . . . . 168
B-170 Bridge to Table 3-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
B-171 Bridge to Table 3-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
B-172 Bridge to Table 7-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
B-Index B18.24 Legacy Table References From B18.24.1, B18.24.2, and B18.24.3 . . . . 168
C-1 Materials for Bent Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
C-2 Finish Designations for Bent Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
v
FOREWORD
A joint government and ASME B18 meeting was held November 4, 1977 at Defense Industrial
Supply Center in Philadelphia, Pennsylvania. A planning group was established to eliminate
road blocks to the government acceptance and use of national voluntary standards. Designated
the Ad Hoc Fastener Planning Group, the Group’s first meeting was held February 2, 1978 at
ASTM Headquarters in Philadelphia. At the meeting, government appendices to ASME B18
metric product standards were endorsed. In addition, an ANSI metric log was established to
prevent duplicate efforts and provide the latest status of 18 metric fastener projects. The U.S. Army
Armament Research Development and Engineering Center was tasked to provide government
appendices for metric fastener standards on an as-needed basis.
At the ASME B18 Standards Committee meeting on December 5, 1991, based on a
B18 Subcommittee 24 suggestion, the B18 Standards Committee unanimously approved a motion
that Subcommittee 24 Industry/Government Liaison be reactivated and tasked by B18 to address
the issue of how to best handle needed changes to the various government appendices.
At the Subcommittee 24 meeting, May 12, 1993 at ASME Headquarters in New York City, the
part identifying number (PIN) code system concept for B18 product standards was agreed to.
The need was expressed that a PIN code system be made available for all users, not just limited
to government users. This was based on the recognition that twenty-eight B18 metric and one
B18 inch (ANSI B18.2.1) standards contained government Appendices for Department of Defense
(DOD) PIN acquisition usage and were not considered part of the B18 Standard. Again, the
premise based on the aforementioned proposal was to provide a B18 code system for all users
without exception.
Based on the B18 Standards Committee mandate, a Subcommittee 24 Task Group was formed
to develop B18.24.1 (externally threaded fasteners) first, then proceed with B18.24.2 (internally
threaded B18 fasteners) and B18.24.3 (nonthreaded fasteners) standards.
During the April 2003 B18 Subcommittee 24 and B18 Standards Committee meetings, it was
agreed to draft a new standard, ASME B18.24, Part Identifying Number (PIN) Code System
Standard for B18 Fastener Products, to replace the existing ASME B18.24.1, B18.24.2, and
B18.24.3 standards. This was based on users’ expressed need to reduce the 21-digit PIN code to
a code with 18 digits, to accommodate the 18-digit maximum file name length constraint inherent
with widely used computer aided design (CAD) software platforms. ASME B18.24-2004 was
approved by the American National Standards Institute (ANSI) on April 16, 2004.
Following approval by the ASME B18 Standards Committee and after public review,
ASME B18.24a-2006 was approved by the American National Standards Institute on December 7,
2006. The title of Table 1-1 was revised along with the column head under “Feature.” Material
was added under B18.2.6 and B18.9. “B18.16M” was revised to read “B18.16.3M.” “B18.27.6” was
revised to read “B27.6.” “B18.27.7M” was revised to read “B27.7.” “B18.27.8M” was revised to
read “B27.8.” Various changes were made throughout the document to incorporate required
changes.
In 2013, Subcommittee 24 of the B18 Standards Committee created a Task Group to review the
B18.24 document against new standards published since 2004 and revisions to existing standards.
Quite a few changes were integrated into the new version including the addition of several
commonly used ISO callouts for material and plating and several metric standards that had not
previously existed. Several ASTM documents for material and plating were added to the B18.24
PIN system to make it more useful.
This revision was approved by ANSI as an American National Standard on June 1, 2015.
vi
ASME B18 COMMITTEE
Standardization of Bolts, Nuts, Rivets, Screws, Washers,
and Similar Fasteners
(The following is the roster of the Committee at the time of approval of this Standard.)
STANDARDS COMMITTEE OFFICERS

J. Greenslade, Chair
D. S. George, Vice Chair
W. H. King, Vice Chair
C. J. Gomez, Secretary
STANDARDS COMMITTEE PERSONNEL

V. Cartina, Nylok, LLC W. H. King, Fastenal Co.
L. Claus, Contributing Member, NNI Training and Consulting, Inc. D. Korneffel, Contributing Member, Cadenas PARTsolutions
D. A. Clever, Contributing Member, Consultant J. F. McCarrick, Defense Supply Center Philadelphia
A. P. Cockman, Ford Motor Co. M. D. Prasad, Contributing Member, Global M & F Solutions, Inc.
C. A. D. de la Garza, TSP, Inc. Q. M. Smith III, Oregon DOT
D. S. George, Ramco Specialties R. D. Strong, Doerken Corp.
C. J. Gomez, The American Society of Mechanical Engineers W. K. Wilcox, Consultant
J. Greenslade, Industrial Fasteners Institute C. B. Williamson, Fastenal Co.
J. J. Grey, Contributing Member, Fastener Consulting Services, Inc. C. J. Wilson, Consultant
A. Herskovitz, Contributing Member, Consultant J. G. Zeratsky, Contributing Member, National Rivet and
J. C. Jennings, Contributing Member, Naval Surface Warfare Center Manufacturing Co.
SUBCOMMITTEE 24 — PIN CODE SYSTEM FOR B18 FASTENERS

D. Korneffel, Chair, Cadenas PARTsolutions J. Jennings, Naval Surface Warfare Center
J. Greenslade, Industrial Fasteners Institute J. F. McCarrick, Defense Supply Center Philadelphia
A. P. Cockman, Ford Motor Co. R. B. Meade, Atrona Material Testing Laboratories, Inc.
C. A. D. de la Garza, TSP, Inc. L.C. Schroeder, Kansas Department of Transportation
J. S. Foote, Trade Association Management, Inc. R. D. Strong, Doerken Corp.
D. S. George, Ramco Specialties W. K. Wilcox, Consultant
B. Hasiuk, Defense Supply Center Philadelphia C. J. Wilson, Consultant
vii
CORRESPONDENCE WITH THE B18 COMMITTEE
General. ASME Standards are developed and maintained with the intent to represent the
consensus of concerned interests. As such, users of this Standard may interact with the Committee
by requesting interpretations, proposing revisions or a Case, and attending Committee meetings.
Correspondence should be addressed to:
Secretary, B18 Standards Committee
The American Society of Mechanical Engineers
Two Park Avenue
New York, NY 10016-5990
http://go.asme.org/Inquiry
Proposing Revisions. Revisions are made periodically to the Standard to incorporate changes
that appear necessary or desirable, as demonstrated by the experience gained from the application
of the Standard. Approved revisions will be published periodically.
The Committee welcomes proposals for revisions to this Standard. Such proposals should be
as specific as possible, citing the paragraph number(s), the proposed wording, and a detailed
description of the reasons for the proposal, including any pertinent documentation.
Proposing a Case. Cases may be issued for the purpose of providing alternative rules when
justified, to permit early implementation of an approved revision when the need is urgent, or to
provide rules not covered by existing provisions. Cases are effective immediately upon ASME
approval and shall be posted on the ASME Committee Web page.
Requests for Cases shall provide a Statement of Need and Background Information. The request
should identify the Standard and the paragraph, figure, or table number(s), and be written as a
Question and Reply in the same format as existing Cases. Requests for Cases should also indicate
the applicable edition(s) of the Standard to which the proposed Case applies.
Interpretations. Upon request, the B18 Standards Committee will render an interpretation of
any requirement of the Standard. Interpretations can only be rendered in response to a written
request sent to the Secretary of the B18 Standards Committee at go.asme.org/Inquiry.
The request for an interpretation should be clear and unambiguous. It is further recommended
that the inquirer submit his/her request in the following format:
Subject: Cite the applicable paragraph number(s) and the topic of the inquiry.
Edition: Cite the applicable edition of the Standard for which the interpretation is
being requested.
Question: Phrase the question as a request for an interpretation of a specific requirement
suitable for general understanding and use, not as a request for an approval
of a proprietary design or situation. The inquirer may also include any plans
or drawings that are necessary to explain the question; however, they should
not contain proprietary names or information.
Requests that are not in this format may be rewritten in the appropriate format by the Committee
prior to being answered, which may inadvertently change the intent of the original request.
ASME procedures provide for reconsideration of any interpretation when or if additional
information that might affect an interpretation is available. Further, persons aggrieved by an
interpretation may appeal to the cognizant ASME Committee or Subcommittee. ASME does not
“approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
Attending Committee Meetings. The B18 Standards Committee regularly holds meetings
and/or telephone conferences that are open to the public. Persons wishing to attend any meeting
and/or telephone conference should contact the Secretary of the B18 Standards Committee.
Future Committee meeting dates and locations can be found on the Committee Page at
go.asme.org/B18committee.
viii
ASME 18.24-2015
PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD

FOR B18 FASTENER PRODUCTS
1 INTRODUCTORY NOTES 2.2 Alpha “I” and “O”

1.1 Scope Alpha “I” , “O”, and “-“ are not used in PIN field
coding configuration.
1.1.1 This Standard is intended to provide all users
(manufacturers, distributors, design and configuration, 2.3 Characteristics
parts control. inventory control, test and maintenance
The B18 PIN code shall identify only those characteris-
functions) with the capability to identify externally
tics specified in the B18 product standards.
threaded, internally threaded and nonthreaded fastener
products by a preselected order of coding as specified 2.4 Succession of B18.24.1, B18.24.2, and B18.24.3
herein. 21-Character PIN Codes
1.1.2 The B18 PIN is a self-contained code, with Nonmandatory Appendices A and B of this document
distinct identification linkage to individual ASME B18 provide instructions and resources for determining the
fastener product standards. The PIN code concept pro- superseding B18.24.4 18-character PIN code for any can-
vides for direct traceability back to the applicable B18 celled B18.24.1, B18.24.2, and B18.24.3 21-character
product standard. In case of conflict with this document PIN code.
and the B18 product standard, the B18 product standard
shall take precedence. 2.5 Identification of Part Numbering System on
Drawings
1.1.3 This Standard is not intended for use as a
substitute for the correct usage of the B18 standards for On drawings or parts lists where a column exists for
fastener selection and specification. The PIN code is identifying the manufacturer or its Commercial and
intended as an alternative to the plain text product cal- Government Entity Code, indicate the CAGE Code
lout as prescribed in the “Designation” or “Ordering” “05047/B18.24” or “ASME B18.24”. If no column exists
section of the source B18 product standard. The existence or there is space only for the five-digit CAGE Code, then
of a PIN code for B18 fastener description is not intended a note must indicate that the part numbers are defined
to imply that all products described are available. in ASME B18.24.
1.1.4 A few B18 fasteners cannot be thoroughly 2.6 Guidance for Using B18.24
identified using the 18-digit system defined in this
B18.24 (this Standard) defines an 18-digit alpha-
Standard. If the user does not find the PIN needed in
numeric system for describing most ASME B18 fasten-
the body of this Standard, consult the Appendix where
ers. Those using this Standard shall refer to the specific
special PIN systems have been created to specifically
ASME B18 standard for product details first, and only
identify those items. If the sought-after PIN for the
then use the appropriate descriptive number defined in
desired B18 fastener is not in the Appendix, notice
this Standard for placing inquiries and orders.
should be sent to the secretary of B18 so that the item
This Standard can be used to describe fasteners that
can be addressed in the next revision of this Standard.
are not readily available from suppliers, or to create
numbers in conflict with the B18 product requirements,
2 GENERAL GUIDANCE such as selecting inappropriate or non-recommended
finishes. This is why it is critical for users to review the
2.1 Optional Coverage applicable B18 standard before using B18.24 to describe
Each individual ASME B18 fastener product standard a desired fastener. The product requirements cited in
provides for optional B18 PIN coverage under individual ASME B18 Standards take precedence over
“Designation” or “Ordering” data. conflicting numbers that might be created using B18.24.
1
ASME 18.24-2015
3 PIN CODE STRUCTURE

3.1 PIN Structure Overview
B18 Fastener PIN Example

Additional
Base PIN Thread Configuration and Size Material/Finish Features
AEB02C250A50AP1A11 AEB02 C 250 A50 AP1 A1 1
18 characters Field 1 Field 2 Field 3 Field 4 Field 5 Field 6 Field 7
General data for 18-digit B18 PINs
Field Field Name Field Length Table References Page Number(s)
1 Base PIN [Note (1)] Characters 1–5 Table 1-1 [Note (1)] 4
2 Fastener Thread Configuration Character 6 Tables 2-1 and 2-2 25
3 Fastener Size Characters 7–9 Tables 3-1 through 3-29 25–38
4 Length/Other Dimensions Characters 10–12 Tables 4-1 through 4-6 38–42
5 Material and Treatment Characters 13–15 Tables 5-1 through 5-9 43–96
6 Plating, Coating, and Passivation Characters 16–17 Tables 6-1 through 6-5 97–117
7 Additional Features Character 18 Tables 7-1 through 7-14 118, 119
NOTE:
(1) Base PINs are provided in the five-character Field 1 of Table 1-1 starting with AE for ASME, followed by one character for the Fastener
Family and two characters for the specific type fastener in the Fastener Family (e.g., AEB02).
To begin, the user would refer to Table 1-1 which is

3.2 PIN Usage Guidance organized and sorted as follows:
Both the B18 PIN creation and lookup tasks are 2-step (a) alphabetically by Base PIN to accommodate
processes. lookup queries
Step 1: Specify or identify the specific B18 Fastener (b) hierarchically as follows for Fastener Family and
Family and Type/Base PIN from Table 1-1. Type/Base PIN selection:
This shall be the first five (5) digits, beginning
with the AE prefix. Fastener Family PIN (Field 1, 3rd character)
Step 2: Specify or identify the specific applicable B18 → B18 Standard Number
fastener attributes from the lookup table refer- → Specific Fastener Type
ences in Table 1-1 field columns. (Field 1, 4th & 5th characters)
For example: AEB02C250A50AP1A11 — Bolt, Hex
from ASME B18.2.1
2
ASME 18.24-2015
The following is excerpted from Table 1-1:

Sample Table 1-1 Fastener Family and Type/Base PIN
er
Fin al
e
ad
th
ur
ish
er
Applicable
/O
re
at
ze
at
Th
Bolts
Lg
Fe
Table References:
Si
M
B18.2.1 Square and Hex Bolts and Screws (Inch Series) Field 2 3 4 5 6 7
AEB01 Bolts, Square 2-1 3-1 4-1 5-* 6-* 7-1

AEB02 Bolts, Hex 2-1 3-1 4-1 5-* 6-* 7-1
Field 1
AEB03 Bolts, Hex, Heavy 2-1 3-1 4-1 5-* 6-* 7-1
Base
AEB04 Bolts, Askew Head 2-1 3-1 4-1 5-* 6-* 7-1
PIN
B18.2.3.5M Metric Hex Bolts Field 2 3 4 5 6 7
AEB05 Bolts, Hex 2-1 3-3 4-2 5-* 6-* 7-2
B18.2.3.6M Metric Heavy Hex Bolts Field 2 3 4 5 6 7
— —
— —
— —
B18.9 Plow Bolts (Inch Series) Field 2 3 4 5 6 7

AEB24 Bolts, Plow No. 3 Regular Head (Round, Countersunk, Square Neck) 2 -1 3-1 4-1 5-* 6-* 7-1
AEB25 Bolts, Plow No. 3 Repair Head (Round, Countersunk, Square Neck) 2 -1 3-1 4-1 5-* 6-* 7-1
AEB26 Bolts, Plow No. 7 Regular Head (Round, Countersunk, Reverse Key) 2 -1 3-1 4-1 5-* 6-* 7-1
Field Length = 1, 3, 3, 3, 2, 1
denotes the emboldened Base PIN column of Table 1-1. The Base PIN identifies an individual, top level fastener type
from a B18 standard. The Base PIN is comprised of characters 1 through 5.
PIN p AEB02, the user would interpret the remainder

In our example, the Base PIN is AEB02 and the unique of the PIN as follows:
B18 Fastener PIN is AEB02C250A50AP1A11. ➁ and ➂ Look up the:
denote field number and field length, respectively, for 1-character value for Field 2 in Table 2-1
subsequent PIN fields. By traversing from left to right 3-character value for Field 3 in Table 3-1
from the beginning of Field 2 (character 6), the user can 3-character value for Field 4 in Table 4-1
specify or look up the fastener attributes for any unique
3-character value for Field 5 in Tables 5-1 through 5-9
Base PIN/top level fastener type.
2-character value for Field 6 in Tables 6-1 through 6-5
➃ denotes the attribute table number references for
fields 2–7 as → 2-1 3-1 4-1 5-* 6-* 7-1. It is from these 1-character value for Field 7 in Table 7-1
attribute fields that a unique fastener is described. The following is an example for this specific
Having located the appropriate lookup tables for Base B18 fastener PIN:
Attributes Attribute Values

Field Character Field Table Fastener Parameter
Field # Length Range Value Ref(s) Parameter Value
1 5 1–5 AEB02 1–1 → PIN Spec ASME B18.24

1–1 → PIN Spec Title PIN Code System Standard for B18 Fastener Products
1–1 → Source Document ASME B18.2.1
1–1 → Source Document Title Square and Hex Bolts and Screws (Inch Series)
1–1 → Unit System Inch
1–1 → Fastener Type Bolt, Hex
2 1 6 C 2–1 → Thread Configuration UNC–2
3 3 7–9 250 3–1 → Size .250
4 3 10–12 A50 4–1 → Length/Other Dim. 1.500
5 3 13–15 AP1 5–1 → Material Stainless Steel
5–1 → Material Spec ASTM A194/A194M, Grade 8MLCuNA
6 2 16–17 A1 6–1 → Finish Plain, no finish
6–1 → Finish Spec N/A
7 1 18 1 7–1 → Features Plain, no additional features
3
ASME 18.24-2015
Please note that Tables 4-1 and 4-2 include coverage of B18 Fastener Family
Field 4 externally threaded fastener lengths for fasteners PIN Description
with a reduced body diameter (RBD).
B Bolts
E Inserts
K Keys and Keyways
ASME B18 Prefix M Screw and Washer Assemblies — SEMs
N Nuts
PIN Description
P Pins
AE ASME B18 PIN R Retaining Rings
S Screws
All 18-digit ASME B18 Fastener PINs shall begin with T Studs (Includes Lifting Eyes and Eyebolts)
an “AE” prefix. “AE” combined with the next 3 digits V Rivets
shall comprise the Fastener Family and Type/Base PIN. W Washers
Refer to Table 1-1 to specify/look up the appropriate The B18 Fastener Family table describes digit 3 of
top level B18 Fastener Family and Type/Base PIN. Field 1, which is a total of 5 digits in length. As such,
the field values of B18 Fastener Family are included
within the Table 1-1 PIN values. This table is presented
solely to demonstrate how the user can quickly identify
what type of fastener a given PIN describes simply by
identifying the third digit in a B18 PIN.
Table 1-1 Fastener Family and Type/Base PIN

GENERAL NOTES:
(a) Strike-through text denotes obsolete fasteners or characteristics, but are left in this document for reference and for use in deciphering
older PIN codes.
(b) Italic text denotes information that remains the same as in the previous version of the Standard, but has been moved within this document
for consolidation or clarity.
Bolts
er
ial
e
Oth
ead
tur
ish
ter
Applicable
e
Lg/
Fea
Thr
Ma
Siz
Fin
Table References:
AEB01 Bolts, Square 2-1 3-1 4-1 5-* 6-* 7-2
AEB02 Bolts, Hex 2-1 3-1 4-1 5-* 6-* 7-2
AEB04 Bolts, Askew Head 2-1 3-1 4-1 5-* 6-* 7-2
B18.2.3.5M Metric Hex Bolts Field 2 3 4 5 6 7

AEB05 Bolts, Hex 2-1 3-3 4-2 5-* 6-* 7-2
B18.2.3.6M Metric Heavy Hex Bolt Field 2 3 4 5 6 7

B18.2.3.7M Metric Heavy Hex Structural Bolt Field 2 3 4 5 6 7

AEB07 Bolts, Hex, Heavy Structural 2-1 3-3 4-2 5-* 6-* 7-2
B18.2.3.10M Metric Square Head Bolts Field 2 3 4 5 6 7

AEB08 Bolts, Square 2-1 3-3 4-2 5-* 6-* 7-2
B18.2.6 Fasteners for Use in Structural Applications (Inch Series) Field 2 3 4 5 6 7

AEB34 Bolts, Hex, Heavy, Tension Control Structural 2-1 3-1 4-1 5-* 6-* 7-2
AEB35 Bolts, Round Head, Tension Control Structural 2-1 3-1 4-1 5-* 6-* 7-2
B18.2.6M Metric Fasteners for Use in Structural Applications Field 2 3 4 5 6 7

4
ASME 18.24-2015
Table 1-1 Fastener Family and Type/Base PIN (Cont’d)

GENERAL NOTES:
older PIN codes.
Bolts (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.5 Round Head Bolts (Inch Series) Field 2 3 4 5 6 7

AEB10 Bolts, Round Head, (Button Head Bolts) 2-1 3-1 4-1 5-* 6-* 7-2
AEB11 Bolts, Round, Square Neck (Square Neck Carriage Bolts) 2-1 3-1 4-1 5-* 6-* 7-2
AEB12 Bolts, Round, Short Square Neck 2-1 3-1 4-1 5-* 6-* 7-2
AEB13 Bolts, Round, Ribbed Neck (Ribbed Neck Carriage Bolts) 2-1 3-1 4-1 5-* 6-* 7-2
AEB14 Bolts, Round, Fin Neck (Fin Neck Carriage Bolts) 2-1 3-1 4-1 5-* 6-* 7-2
AEB15 Bolts, Round, Step 2-1 3-1 4-1 5-* 6-* 7-2
AEB16 Bolts, Round, Countersunk, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AEB17 Bolts, Round, Countersunk, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AEB18 Bolts, Round, 114 deg, Countersunk, Square Neck (Countersunk Carriage Bolts) 2-1 3-1 4-1 5-* 6-* 7-2
AEB19 Bolts, Round, Elevator, Flat Head, Countersunk 2-1 3-1 4-1 5-* 6-* 7-2
AEB20 Bolts, Round, T Head 2-1 3-1 4-1 5-* 6-* 7-2
B18.5.2.1M Metric Round Head Short Square Neck Bolts Field 2 3 4 5 6 7

AEB21 Bolts, Round, Short Square Neck 2-1 3-3 4-2 5-* 6-* 7-2
B18.5.2.2M Metric Round Head Square Neck Bolts Field 2 3 4 5 6 7

AEB22 Bolts, Round, Square Neck 2-1 3-3 4-2 5-* 6-* 7-2
B18.5.2.3M Metric Round Head Square Neck Bolts With Large Head Field 2 3 4 5 6 7
AEB23 Bolts, Round, Square Neck, Large Head 2-1 3-3 4-2 5-* 6-* 7-2
B18.9 Plow Bolts (Inch Series) Field 2 3 4 5 6 7

AEB24 Bolts, Plow No. 3 Regular Head (Round, Countersunk, Square Neck) 2-1 3-1 4-1 5-* 6-* 7-2
AEB25 Bolts, Plow No. 3 Repair Head (Round, Countersunk, Square Neck) 2-1 3-1 4-1 5-* 6-* 7-2
AEB26 Bolts, Plow No. 7 Regular Head (Round, Countersunk, Reverse key) 2-1 3-1 4-1 5-* 6-* 7-2
AEB27 Bolts, Plow No. 7 Repair Head (Round, Countersunk, Reverse key) 2-1 3-1 4-1 5-* 6-* 7-2
AEB28 Bolts, Plow, Square, No. 4 Repair Head (Square Head, Countersunk) 2-1 3-1 4-1 5-* 6-* 7-2
AEB29 Bolts, Plow No. 6 Repair Head (Round, Countersunk, Heavy key) 2-1 3-1 4-1 5-* 6-* 7-2
AEB30 Bolts, Plow, Square, No. 4 Regular Head (Square Head, Countersunk) 2-1 3-1 4-1 5-* 6-* 7-2
AEB31 Bolts, Plow No. 6 Regular Head (Round, Countersunk, Heavy key) 2-1 3-1 4-1 5-* 6-* 7-2
AEB38 Bolts, Plow Clipped Head 2-1 3-1 4-1 5-* 6-* 7-2
AEB39 Bolts, Plow Elliptical Head 2-1 3-1 4-1 5-* 6-* 7-2
B18.10 Track Bolts and Nuts (Inch Series) Field 2 3 4 5 6 7

AEB32 Bolts, Track, Round, Oval Neck (Mushroom Head) 2-1 3-1 4-1 5-* 6-* 7-13
AEB33 Bolts, Track, Round, Elliptic Neck (Mushroom Head) 2-1 3-1 4-1 5-* 6-* 7-13
Inserts
B18.29.1 Helical Coil Screws Thread Inserts — Free Running and Screw Locking (Inch Series) Field 2 3 4 5 6 7
AEE01 Inserts, Helical Coil Screw Thread (Free Running) 2-1 3-1 4-4 5-* 6-* 7-1
AEE02 Inserts, Helical Coil Screw Thread (Screw Locking) 2-1 3-1 4-4 5-* 6-* 7-1
B18.29.2M Metric Helical Coil Screws Thread Inserts — Free Running and Screw Locking Field 2 3 4 5 6 7
AEE03 Inserts, Helical Coil Screw Thread (Free Running) 2-1 3-3 4-4 5-* 6-* 7-1
AEE04 Inserts, Helical Coil Screw Thread (Screw Locking) 2-1 3-3 4-4 5-* 6-* 7-1
B18.29.3 Tangless Helical Coil Screws Thread Inserts“Free Field 2 3 4 5 6 7

Running and Screw Locking (Inch Series)
AEE05 Inserts, Tangless Helical Coil Screw Thread (Free Running) 2-1 3-1 4-4 5-* 6-* 7-1
AEE06 Inserts, Tangless Helical Coil Screw Thread (Screw Locking) 2-1 3-1 4-4 5-* 6-* 7-1
5
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Keys and Keyways
er
al
ture
Oth
ead
teri
h
Applicable
is
e
Fea
Lg/
Th r
Ma
Siz
Fin
Table References:
B18.25.1M Metric Square and Rectangular Keys and Keyways Field 2 3 4 5 6 7

AEK01 Keys, Square Style A 2-1 3-28 4-2 5-* 6-* 7-1
AEK02 Keys, Square Style B 2-1 3-28 4-2 5-* 6-* 7-1
AEK03 Keys, Square Style C 2-1 3-28 4-2 5-* 6-* 7-1
AEK04 Keys, Square Style A, Hardened 2-1 3-28 4-2 5-* 6-* 7-1
AEK05 Keys, Square Style B, Hardened 2-1 3-28 4-2 5-* 6-* 7-1
AEK06 Keys, Square Style C, Hardened 2-1 3-28 4-2 5-* 6-* 7-1
AEK07 Keys, Rectangular Style A 2-1 3-28 4-2 5-* 6-* 7-1
AEK08 Keys, Rectangular Style B 2-1 3-28 4-2 5-* 6-* 7-1
AEK09 Keys, Rectangular Style C 2-1 3-28 4-2 5-* 6-* 7-1
AEK10 Keys, Rectangular Style A, Hardened 2-1 3-28 4-2 5-* 6-* 7-1
AEK11 Keys, Rectangular Style B, Hardened 2-1 3-28 4-2 5-* 6-* 7-1
AEK12 Keys, Rectangular Style C, Hardened 2-1 3-28 4-2 5-* 6-* 7-1
B18.25.2M Metric Woodruff Keys and Keyways Field 2 3 4 5 6 7

AEK13 Keys, Woodruff, Normal Form 2-1 3-29 4-2 5-* 6-* 7-1
AEK14 Keys, Woodruff, Whitney Form 2-1 3-29 4-2 5-* 6-* 7-1
Screw and Washer Assemblies — Screw Component

B18.13 Screw and Washer Assemblies (Inch Series) Field 2 3 4 5 6 7
AEM01 SEMs, Hex Cap Screw 2-1 3-1 4-1 5-* 6-* 7-9
AEM14 SEMs, Hex Socket Head Cap Screw 2-1 3-1 4-1 5-* 6-* 7-9
AEMC0 SEMs, Flat Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMC1 SEMs, Flat Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC2 SEMs, Flat Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC3 SEMs, Flat Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC4 SEMs, Flat Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC5 SEMs, 100 deg Flat Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMC6 SEMs, 100 deg Flat Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC7 SEMs, 100 deg Flat Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC8 SEMs, 100 deg Flat Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMC9 SEMs, 100 deg Close Tolerance Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMD0 SEMs, 100 deg Close Tolerance Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD1 SEMs, 100 deg Close Tolerance Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD2 SEMs, 100 deg Close Tolerance Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD3 SEMs, Oval Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMD4 SEMs, Oval Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD5 SEMs, Oval Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD6 SEMs, Oval Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD7 SEMs, Oval Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMD8 SEMs, Undercut Flat Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMD9 SEMs, Undercut Flat Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME0 SEMs, Undercut Flat Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME1 SEMs, Undercut Flat Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME2 SEMs, Undercut Flat Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME3 SEMs, Oval Undercut Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEME4 SEMs, Oval Undercut Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME5 SEMs, Oval Undercut Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME6 SEMs, Oval Undercut Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME7 SEMs, Oval Undercut Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEME8 SEMs, Flat Trim Head Machine Screw, Type I Cross Recess 2-1 3-11 4-1 5-* 6-* 7-9
6
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screw and Washer Assemblies — Screw Component (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.13 Screw and Washer Assemblies (Inch Series) (Cont’d) Field 2 3 4 5 6 7

AEME9 SEMs, Flat Trim Head Machine Screw, Type IA Cross Recess 2-1 3-11 4-1 5-* 6-* 7-9
AEMF0 SEMs, Flat Trim Head Machine Screw, Type II Cross Recess 2-1 3-11 4-1 5-* 6-* 7-9
AEMF1 SEMs, Oval Trim Head Machine Screw, Type I Cross Recess 2-1 3-11 4-1 5-* 6-* 7-9
AEMF2 SEMs, Oval Trim Head Machine Screw, Type IA Cross Recess 2-1 3-11 4-1 5-* 6-* 7-9
AEMF3 SEMs, Oval Trim Head Machine Screw, Type II Cross Recess 2-1 3-11 4-1 5-* 6-* 7-9
AEMF4 SEMs, Pan Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMF5 SEMs, Pan Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMF6 SEMs, Pan Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMF7 SEMs, Pan Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMF8 SEMs, Pan Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMF9 SEMs, Pan Head Machine Screw, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMG0 SEMs, Pan Head Machine Screw, Type IA Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMG1 SEMs, Pan Head Machine Screw, Type III Square Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMG2 SEMs, Fillister Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMG3 SEMs, Fillister Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMG4 SEMs, Fillister Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMG5 SEMs, Fillister Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMG6 SEMs, Fillister Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMG7 SEMs, Fillister Head Machine Screw, Slotted and Drilled 2-1 3-1 4-1 5-* 6-* 7-9
AEMG8 SEMs, Truss Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMG9 SEMs, Truss Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH0 SEMs, Truss Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH1 SEMs, Truss Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH2 SEMs, Truss Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH3 SEMs, Truss Head Machine Screw, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMH4 SEMs, Truss Head Machine Screw, Type III Square Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMH5 SEMs, Binding Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMH6 SEMs, Binding Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH7 SEMs, Binding Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH8 SEMs, Binding Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMH9 SEMs, Binding Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ0 SEMs, Indented Regular Hex Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ1 SEMs, Indented Regular Hex Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ2 SEMs, Trimmed Regular Hex Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ3 SEMs, Trimmed Regular Hex Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ4 SEMs, Fully Upset Regular Hex Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ5 SEMs, Fully Upset Regular Hex Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ6 SEMs, Indented Large Hex Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ7 SEMs, Indented Large Hex Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ8 SEMs, Trimmed Large Hex Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMJ9 SEMs, Trimmed Large Hex Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMK0 SEMs, Fully Upset Large Hex Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMK1 SEMs, Fully Upset Large Hex Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMK2 SEMs, Indented Regular Hex Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMK3 SEMs, Trimmed Regular Hex Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMK4 SEMs, Fully Upset Regular Hex Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMK5 SEMs, Indented Large Hex Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMK6 SEMs, Trimmed Large Hex Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMK7 SEMs, Fully Upset Large Hex Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEMK8 SEMs, Indented Hex Washer Head Machine Screw, Unslotted 2-1 3-1 4-1 5-* 6-* 7-9
AEMK9 SEMs, Indented Hex Washer Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
7
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:

AEML0 SEMs, Indented Hex Washer Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEML1 SEMs, Indented Hex Washer Head Machine Screw, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEML2 SEMs, Round Washer Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEML3 SEMs, Round Washer Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEML4 SEMs, Round Head Machine Screw, Slotted 2-1 3-1 4-1 5-* 6-* 7-9
AEML5 SEMs, Round Head Machine Screw, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEML6 SEMs, Round Head Machine Screw, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEML7 SEMs, Round Head Machine Screw, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEML8 SEMs, Round Head Machine Screw, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-9
AEML9 SEMs, Round Head Machine Screw, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMM0 SEMs, Round Head Machine Screw, Type IA Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-9
AEMM1 SEMs, Flat Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMM2 SEMs, Flat Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMM3 SEMs, Flat Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMM4 SEMs, Flat Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMM6 SEMs, 100 Deg. Flat Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMM7 SEMs, 100 Deg. Flat Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMM8 SEMs, 100 Deg. Flat Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMM9 SEMs, 100 Deg. Flat Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMN0 SEMs, Oval Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMN1 SEMs, Oval Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMN2 SEMs, Oval Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMN3 SEMs, Oval Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMN5 SEMs, Undercut Flat Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMN6 SEMs, Undercut Flat Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMN7 SEMs, Undercut Flat Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMN8 SEMs, Undercut Flat Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP0 SEMs, Undercut Oval Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMP1 SEMs, Undercut Oval Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP2 SEMs, Undercut Oval Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP3 SEMs, Undercut Oval Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP5 SEMs, Flat Trim Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP6 SEMs, Flat Trim Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP7 SEMs, Flat Trim Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP8 SEMs, Oval Trim Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMP9 SEMs, Oval Trim Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ0 SEMs, Oval Trim Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ1 SEMs, Pan Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ2 SEMs, Pan Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ3 SEMs, Pan Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ4 SEMs, Pan Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ5 SEMs, Pan Head Tapping Screw, Type III Square Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMQ9 SEMs, Fillister Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMR0 SEMs, Fillister Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMR1 SEMs, Fillister Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMR2 SEMs, Fillister Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMR4 SEMs, Truss Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMR5 SEMs, Truss Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMR6 SEMs, Truss Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMR7 SEMs, Truss Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMS1 SEMs, Indented Regular Hex Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
8
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:

AEMS2 SEMs, Indented Regular Hex Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS3 SEMs, Trimmed Regular Hex Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS4 SEMs, Trimmed Regular Hex Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS5 SEMs, Fully Upset Regular Hex Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS6 SEMs, Fully Upset Regular Hex Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS7 SEMs, Indented Large Hex Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS8 SEMs, Indented Large Hex Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMS9 SEMs, Trimmed Large Hex Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMT0 SEMs, Trimmed Large Hex Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMT1 SEMs, Fully Upset Large Hex Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMT2 SEMs, Fully Upset Large Hex Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMT3 SEMs, Indented Regular Hex Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMT4 SEMs, Trimmed Regular Hex Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMT5 SEMs, Fully Upset Regular Hex Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMT6 SEMs, Indented Large Hex Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMT7 SEMs, Trimmed Large Hex Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMT8 SEMs, Fully Upset Large Hex Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMT9 SEMs, Indented Hex Washer Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMU0 SEMs, Indented Hex Washer Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMU1 SEMs, Indented Hex Washer Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMU3 SEMs, Round Washer Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMU4 SEMs, Round Washer Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMU5 SEMs, Round Head Tapping Screw, Slotted 2-2 3-6 4-1 5-* 6-* 7-9
AEMU6 SEMs, Round Head Tapping Screw, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMU7 SEMs, Round Head Tapping Screw, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMU8 SEMs, Round Head Tapping Screw, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-9
AEMV2 SEMs, Round Head Tapping Screw, Unslotted 2-2 3-6 4-1 5-* 6-* 7-9
B18.13.1M Metric Screw and Washer Assemblies Field 2 3 4 5 6 7

AEM07 SEMs, Hex Cap Screw 2-1 3-3 4-2 5-* 6-* 7-9
AEM43 SEMs, Hex Socket Head Cap Screw 2-1 3-3 4-2 5-* 6-* 7-9
AEMV3 SEMs, Flat Head Tapping Screw, Slotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMV4 SEMs, Style A Flat Head Tapping Screw, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMV5 SEMs, Style A Flat Head Tapping Screw, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMV6 SEMs, Style A Flat Head Tapping Screw, Type III Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMV7 SEMs, Style B Flat Head Tapping Screw, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMV8 SEMs, Style B Flat Head Tapping Screw, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMV9 SEMs, Style B Flat Head Tapping Screw, Type III Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMW0 SEMs, Oval Head Tapping Screw, Slotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMW1 SEMs, Oval Head Tapping Screw, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMW2 SEMs, Oval Head Tapping Screw, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMW3 SEMs, Oval Head Tapping Screw, Type III Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMW4 SEMs, Pan Head Tapping Screw, Slotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMW5 SEMs, Pan Head Tapping Screw, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMW6 SEMs, Pan Head Tapping Screw, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMW7 SEMs, Pan Head Tapping Screw, Type III Cross Recess 2-2 3-7 4-2 5-* 6-* 7-9
AEMX1 SEMs, Indented Hex Head Tapping Screw, Unslotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMX3 SEMs, Trimmed Hex Head Tapping Screw, Unslotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMX5 SEMs, Fully Upset Hex Head Tapping Screw, Unslotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMX7 SEMs, Hex Flange Head Tapping Screw, Unslotted 2-2 3-7 4-2 5-* 6-* 7-9
AEMY0 SEMs, Flat Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
9
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.13.1M Metric Screw and Washer Assemblies (Cont’d) Field 2 3 4 5 6 7

AEMY1 SEMs, Style A Flat Head Machine Screw, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY2 SEMs, Style A Flat Head Machine Screw, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY3 SEMs, Style A Flat Head Machine Screw, Type III Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY4 SEMs, Style B Flat Head Machine Screw, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY5 SEMs, Style B Flat Head Machine Screw, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY6 SEMs, Style B Flat Head Machine Screw, Type III Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY7 SEMs, Oval Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMY8 SEMs, Oval Head Machine Screw, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMY9 SEMs, Oval Head Machine Screw, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ0 SEMs, Oval Head Machine Screw, Type III Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ1 SEMs, Pan Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ2 SEMs, Pan Head Machine Screw, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ3 SEMs, Pan Head Machine Screw, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ4 SEMs, Pan Head Machine Screw, Type III Cross Recess 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ8 SEMs, Indented Hex Head Machine Screw, Unslotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZ9 SEMs, Indented Hex Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZA SEMs, Trimmed Hex Head Machine Screw, Unslotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZB SEMs, Trimmed Hex Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZC SEMs, Fully Upset Hex Head Machine Screw, Unslotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZD SEMs, Fully Upset Hex Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZE SEMs, Hex Flange Head Machine Screw, Slotted 2-1 3-3 4-2 5-* 6-* 7-9
AEMZF SEMs, Hex Flange Head Machine Screw, Unslotted 2-1 3-3 4-2 5-* 6-* 7-9
Nuts
B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and
Coupling Nuts (Inch Series) Field 2 3 4 5 6 7
AEN01 Nuts, Square 2-1 3-1 4-1 5-* 6-* 7-1
AEN02 Nuts, Hex Flat 2-1 3-1 4-1 5-* 6-* 7-1
AEN03 Nuts, Hex Flat Jam 2-1 3-1 4-1 5-* 6-* 7-1
AEN04 Nuts, Hex 2-1 3-1 4-1 5-* 6-* 7-1
AEN05 Nuts, Hex Jam 2-1 3-1 4-1 5-* 6-* 7-1
AEN06 Nuts, Hex Slotted 2-1 3-1 4-1 5-* 6-* 7-1
AEN07 Nuts, Hex Thick 2-1 3-1 4-1 5-* 6-* 7-1
AEN08 Nuts, Hex Thick Slotted 2-1 3-1 4-1 5-* 6-* 7-1
AEN09 Nuts, Heavy Square 2-1 3-1 4-1 5-* 6-* 7-1
AEN10 Nuts, Heavy Hex Flat 2-1 3-1 4-1 5-* 6-* 7-1
AEN11 Nuts, Heavy Hex Flat Jam 2-1 3-1 4-1 5-* 6-* 7-1
AEN12 Nuts, Heavy Hex 2-1 3-1 4-1 5-* 6-* 7-1
AEN13 Nuts, Heavy Hex Jam 2-1 3-1 4-1 5-* 6-* 7-1
AEN14 Nuts, Heavy Hex Slotted 2-1 3-1 4-1 5-* 6-* 7-1
AEN35 Nuts, Hex Machine, Small Pattern 2-1 3-1 4-1 5-* 6-* 7-1
AEN36 Nuts, Hex Flange 2-1 3-1 4-1 5-* 6-* 7-1
AEN37 Nuts, Hex Flange, Large 2-1 3-1 4-1 5-* 6-* 7-1
AEN38 Nuts, Hex Coupling 2-1 3-1 4-1 5-* 6-* 7-1
B18.2.4.1M Metric Hex Nuts, Style 1 Field 2 3 4 5 6 7

AEN15 Nuts, Hex, Style 1 2-1 3-3 4-2 5-* 6-* 7-1
B18.2.4.2M Metric Hex Nuts, Style 2 Field 2 3 4 5 6 7

AEN16 Nuts, Hex, Style 2 2-1 3-3 4-2 5-* 6-* 7-1
10
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Nuts (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.2.4.3M Metric Slotted Hex Nuts Field 2 3 4 5 6 7

AEN17 Nuts, Hex, Slotted 2-1 3-3 4-2 5-* 6-* 7-1
B18.2.4.4M Metric Hex Flange Nuts Field 2 3 4 5 6 7
AEN18 Nuts, Hex, Flange 2-1 3-3 4-2 5-* 6-* 7-1
B18.2.4.5M Metric Hex Jam Nuts Field 2 3 4 5 6 7
AEN19 Nuts, Hex, Jam 2-1 3-3 4-2 5-* 6-* 7-1
B18.2.4.6M Metric Hex Hex Nuts Field 2 3 4 5 6 7
AEN20 Nuts, Heavy Hex 2-1 3-3 4-2 5-* 6-* 7-1
AEN21 Nuts, Heavy Hex (for use with Structural Bolts) 2-1 3-1 4-1 5-* 6-* 7-1
B18.2.6M Metric Fasteners for use in Structural Applications Field 2 3 4 5 6 7
AEN20 Nuts, Heavy Hex (for use with Metric Structural Bolts) 2-1 3-3 4-2 5-* 6-* 7-1
B18.6.3 Machine Screws and Machine Screw Nuts (Inch Series) Field 2 3 4 5 6 7
AEN22 Nuts, Machine, Square 2-1 3-1 4-1 5-* 6-* 7-1
AEN23 Nuts, Machine, Hex 2-1 3-1 4-1 5-* 6-* 7-1
B18.6.6 Nylon Insert Locknuts (Inch Series) Field 2 3 4 5 6 7
AEN48 Nuts, Nylon Insert Locknut 2-1 3-1 4-1 5-9 6-* 7-1
B18.6.9 Wing Nuts (Inch Series) Field 2 3 4 5 6 7
AEN39 Wing Nut, Type A 2-1 3-1 4-1 5-* 6-* 7-1
AEN40 Wing Nut, Type B, Style 1 2-1 3-1 4-1 5-* 6-* 7-1
AEN41 Wing Nut, Type B, Style 2 2-1 3-1 4-1 5-* 6-* 7-1
AEN42 Wing Nut, Type C, Style 1 2-1 3-1 4-1 5-* 6-* 7-1
AEN45 Wing Nut, Type D, Style 1 2-1 3-1 4-1 5-* 6-* 7-1
AEN46 Wing Nut, Type D, Style 2 (Low Wing) 2-1 3-1 4-1 5-* 6-* 7-1
AEN47 Wing Nut, Type D, Style 3 (Large Base) 2-1 3-1 4-1 5-* 6-* 7-1
B18.10 Track Bolts and Nuts (Inch Series) Field 2 3 4 5 6 7
AEN24 Nuts, Track Bolt (Low Carbon) 2-1 3-1 4-1 5-* 6-* 7-13
AEN25 Nuts, Track Bolt (Medium Carbon) 2-1 3-1 4-1 5-* 6-* 7-13
B18.16M Metric Prevailing-Torque Type Steel Hex Nuts and Hex Flange Nuts Field 2 3 4 5 6 7
AEN26 Nuts, Hex, Prevailing-Torque Type (All Metal), Class 5 and 10 2-1 3-3 4-2 5-8 6-* 7-1
AEN27 Nuts, Hex, Prevailing-Torque Type (Nonmetallic Prevailing Torque Element in
Thread), Class 5 and 10 2-1 3-3 4-2 5-8 6-* 7-1
AEN28 Nuts, Hex, Prevailing-Torque Type (Top Insert), Class 5 and 10 2-1 3-3 4-2 5-8 6-* 7-1
AEN29 Nuts, Hex Flange, Prevailing-Torque Type (All Metal) 2-1 3-3 4-2 5-8 6-* 7-1
AEN30 Nuts, Hex Flange, Prevailing-Torque Type (Nonmetallic Prevailing Torque Element
in Threads) 2-1 3-3 4-2 5-8 6-* 7-1
AEN31 Nuts, Hex Flange, Prevailing-Torque Type (Top Insert) 2-1 3-3 4-2 5-8 6-* 7-1
AEN32 Nuts, Hex, Prevailing-Torque Type (All Metal), Class 9 2-1 3-3 4-2 5-* 6-* 7-1
Threads), Class 5 and 10 2-1 3-3 4-2 5-* 6-* 7-1
AEN34 Nuts, Hex, Prevailing-Torque Type (Top Insert), Class 9 2-1 3-3 4-2 5-* 6-* 7-1
11
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Nuts (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.16.3M Metric Prevailing-Torque Type Steel Hex Nuts and Hex Flange Nuts Field 2 3 4 5 6 7
AEN26 Nuts, Hex, Prevailing-Torque Type (All Metal), Class 5 and 10 2-1 3-3 4-2 5-8 6-* 7-1
Thread), Class 5 and 10 2-1 3-3 4-2 5-8 6-* 7-1
AEN28 Nuts, Hex, Prevailing-Torque Type (Top Insert), Class 5 and 10 2-1 3-3 4-2 5-8 6-* 7-1
AEN29 Nuts, Hex Flange, Prevailing-Torque Type (All Metal) 2-1 3-3 4-2 5-8 6-* 7-1
AEN30 Nuts, Hex Flange, Prevailing-Torque Type (Nonmetallic Prevailing Torque Element
in Threads) 2-1 3-3 4-2 5-8 6-* 7-1
AEN31 Nuts, Hex Flange, Prevailing-Torque Type (Top Insert) 2-1 3-3 4-2 5-8 6-* 7-1
AEN32 Nuts, Hex, Prevailing-Torque Type (All Metal), Class 9 2-1 3-3 4-2 5-* 6-* 7-1
Threads), Class 5 and 10 2-1 3-3 4-2 5-* 6-* 7-1
AEN34 Nuts, Hex, Prevailing-Torque Type (Top Insert), Class 9 2-1 3-3 4-2 5-* 6-* 7-1
Pins
B18.8.1 Clevis Pins and Cotter Pins (Inch Series) Field 2 3 4 5 6 7
AEP01 Pins, Clevis 2-1 3-2 4-5 5-* 6-* 7-1
AEP02 Pins, Cotter 2-1 3-2 4-1 5-* 6-* 7-7
B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series) Field 2 3 4 5 6 7
AEP03 Pins, Taper, Commercial Class 2-1 3-19 4-1 5-* 6-* 7-1
AEP04 Pins, Taper, Precision Class 2-1 3-19 4-1 5-* 6-* 7-1
AEP05 Pins, Dowel, Hardened Ground Machine, Standard Series 2-1 3-2 4-1 5-* 6-* 7-1
AEP06 Pins, Dowel, Hardened Ground Machine, Oversize Series 2-1 3-2 4-1 5-* 6-* 7-1
AEP07 Pins, Dowel, Hardened Ground Production 2-1 3-2 4-1 5-* 6-* 7-1
AEP08 Pins, Dowel, Unhardened Ground 2-1 3-2 4-1 5-* 6-* 7-1
AEP09 Pins, Straight, Chamfered and Square End 2-1 3-2 4-1 5-* 6-* 7-8
AEP10 Pins, Grooved, Low Carbon or Alloy Steel, Type A 2-1 3-2 4-1 5-* 6-* 7-1
AEP11 Pins, Grooved, Corrosion Resistant Steel and Monel, Type A 2-1 3-2 4-1 5-* 6-* 7-1
AEP12 Pins, Grooved, Low Carbon or Alloy Steel, Type E 2-1 3-2 4-1 5-* 6-* 7-1
AEP13 Pins, Grooved, Corrosion Resistant Steel and Monel, Type E 2-1 3-2 4-1 5-* 6-* 7-1
AEP14 Pins, Grooved, Low Carbon or Alloy Steel, Type F 2-1 3-2 4-1 5-* 6-* 7-1
AEP15 Pins, Grooved, Corrosion Resistant Steel and Monel, Type F 2-1 3-2 4-1 5-* 6-* 7-1
AEP16 Pins, Grooved, Low Carbon or Alloy Steel, Type G 2-1 3-2 4-1 5-* 6-* 7-1
AEP17 Pins, Grooved, Corrosion Resistant Steel and Monel, Type G 2-1 3-2 4-1 5-* 6-* 7-1
AEP18 Pins, Grooved, Low Carbon or Alloy Steel, Type H 2-1 3-2 4-1 5-* 6-* 7-1
AEP19 Pins, Grooved, Corrosion-Resistant Steel and Monel, Type H 2-1 3-2 4-1 5-* 6-* 7-1
AEP20 Pins, Round Head Grooved Drive Stud 2-1 3-18 4-1 5-* 6-* 7-1
AEP21 Pins, Grooved, T-Head Cotter 2-1 3-2 4-1 5-* 6-* 7-1
AEP22 Pins, Spring, Slotted Type 2-1 3-2 4-1 5-* 6-* 7-1
AEP23 Pins, Spring, Coiled Type, Standard Duty 2-1 3-2 4-1 5-* 6-* 7-1
AEP24 Pins, Spring, Coiled Type, Heavy Duty 2-1 3-2 4-1 5-* 6-* 7-1
AEP25 Pins, Spring, Coiled Type, Light Duty 2-1 3-2 4-1 5-* 6-* 7-1
B18.8.100M Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground
and Grooved Pins (Metric Series) Field 2 3 4 5 6 7
AEP26 Pins, Spring, Coiled Type, Standard Duty 2-1 3-4 4-2 5-* 6-* 7-1
AEP27 Pins, Spring, Coiled Type, Heavy Duty 2-1 3-4 4-2 5-* 6-* 7-1
AEP28 Pins, Spring, Coiled Type, Light Duty 2-1 3-4 4-2 5-* 6-* 7-1
B18.8.4M Metric Spring Pins — Slotted Field 2 3 4 5 6 7
AEP29 Pins, Spring, Slotted Type A 2-1 3-4 4-2 5-* 6-* 7-1
AEP30 Pins, Spring, Slotted Type B 2-1 3-4 4-2 5-* 6-* 7-1
12
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Pins (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.8.5M Metric Dowel Pins“Hardened Ground Field 2 3 4 5 6 7

AEP31 Pins, Dowel, Machine, Hardened Ground, Standard Series 2-1 3-4 4-2 5-* 6-* 7-1
AEP32 Pins, Dowel, Machine, Hardened Ground, Oversize Series 2-1 3-4 4-2 5-* 6-* 7-1
AEP42 Pins, Grooved, Type 39 2-1 3-4 4-2 5-* 6-* 7-1
AEP46 Pins, Grooved, Type 43-1 2-1 3-4 4-2 5-* 6-* 7-1
B18.8.200M Cotter Pins, Headless Clevis Pins and Headed Clevis Pins (Metric Series) Field 2 3 4 5 6 7
AEP33 Pins, Cotter 2-1 3-4 4-2 5-* 6-* 7-7
B18.8.7M Metric Headless Clevis Pins Field 2 3 4 5 6 7
AEP34 Pins, Clevis, Headless, Type A Unhardened 2-1 3-4 4-2 5-* 6-* 7-1
AEP35 Pins, Clevis, Headless, Type A Hardened 2-1 3-4 4-2 5-* 6-* 7-1
AEP36 Pins, Clevis, Headless, Type B Unhardened 2-1 3-4 4-2 5-* 6-* 7-1
AEP37 Pins, Clevis, Headless, Type B Hardened 2-1 3-4 4-2 5-* 6-* 7-1
B18.8.8M Metric Headless Clevis Pins Field 2 3 4 5 6 7
AEP38 Pins, Clevis, Headed, Type A Unhardened 2-1 3-4 4-2 5-* 6-* 7-1
AEP39 Pins, Clevis, Headed, Type A Hardened 2-1 3-4 4-2 5-* 6-* 7-1
AEP40 Pins, Clevis, Headed, Type B Unhardened 2-1 3-4 4-2 5-* 6-* 7-1
AEP41 Pins, Clevis, Headed, Type B Hardened 2-1 3-4 4-2 5-* 6-* 7-1
B18.8.9M Metric Grooved Pins Field 2 3 4 5 6 7
Retaining Rings
B18.27 Tapered and Reduced Cross Section Retaining Rings (Inch Series) Field 2 3 4 5 6 7
AER01 Retaining Rings, External Type NA1 2-1 3-20 4-1 5-* 6-* 7-1
AER02 Retaining Rings, Internal Type NA2 2-1 3-20 4-1 5-* 6-* 7-1
AER03 Retaining Rings, E-Ring Type NA3 2-1 3-20 4-1 5-* 6-* 7-1
B18.27.2 Tapered and Reduced Cross Section Retaining Rings (Inch Series) Field 2 3 4 5 6 7
AER04 Retaining Rings, Heavy Duty External Type NA4 2-1 3-20 4-1 5-* 6-* 7-1
AER05 Retaining Rings, Reinforced E-Rings Type NA5 2-1 3-20 4-1 5-* 6-* 7-1
AER06 Retaining Rings, C-Type NA6 2-1 3-20 4-1 5-* 6-* 7-1
13
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Retaining Rings (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
AER07 Retaining Rings, Bowed External Rings NA7 2-1 3-20 4-1 5-* 6-* 7-1
AER08 Retaining Rings, Bowed Internal Rings NA8 2-1 3-20 4-1 5-* 6-* 7-1
AER09 Retaining Rings, Bowed External E-Rings NA9 2-1 3-20 4-1 5-* 6-* 7-1
AER10 Retaining Rings, Inverted External NA10 2-1 3-20 4-1 5-* 6-* 7-1
AER11 Retaining Rings, Inverted Internal NA11 2-1 3-20 4-1 5-* 6-* 7-1
AER12 Retaining Rings, Beveled External NA12 2-1 3-20 4-1 5-* 6-* 7-1
AER13 Retaining Rings, Beveled Internal NA13 2-1 3-20 4-1 5-* 6-* 7-1
AER14 Retaining Rings, External Self-Locking Rings Type NA14 2-1 3-20 4-1 5-* 6-* 7-1
AER15 Retaining Rings, External Interlocking Rings Type NA15 2-1 3-20 4-1 5-* 6-* 7-1
AER16 Retaining Rings, External Bowed Locking Prongs Rings Type NA16 2-1 3-20 4-1 5-* 6-* 7-1
B27.6 General Purpose Uniform Cross Section Spiral Retaining Rings (Inch Series) Field 2 3 4 5 6 7
AER17 Retaining Rings, GP Uniform Cross Section Spiral, Light Duty External Type 2-1 3-21 4-1 5-* 6-* 7-1
AER18 Retaining Rings, GP Uniform Cross Section Spiral, Heavy Duty External Type 2-1 3-21 4-1 5-* 6-* 7-1
AER19 Retaining Rings, GP Uniform Cross Section Spiral, Light Duty Internal Type 2-1 3-21 4-1 5-* 6-* 7-1
AER20 Retaining Rings, GP Uniform Cross Section Spiral, Heavy Duty Internal Type 2-1 3-21 4-1 5-* 6-* 7-1
B27.7 Metric Tapered and Reduced Cross Section Retaining Rings Field 2 3 4 5 6 7
AER21 Retaining Rings, GP Tapered and Reduced Cross Section, Basic External Series
Type 3AM1 2-1 3-20 4-2 5-* 6-* 7-1
AER22 Retaining Rings, GP Tapered and Reduced Cross Section, Basic Internal Series
Type 3BM1 2-1 3-20 4-2 5-* 6-* 7-1
AER23 Retaining Rings, GP Tapered and Reduced Cross Section, E-Ring External Series
Type 3CM1 2-1 3-20 4-2 5-* 6-* 7-1
B27.8 Metric Tapered and Reduced Cross Section Retaining Rings Field 2 3 4 5 6 7
AER24 Retaining Rings, GP Tapered and Reduced Cross Section, Heavy Duty 1 Ring
External Series Type 3DM1 2-1 3-20 4-2 5-* 6-* 7-1
AER25 Retaining Rings, GP Tapered and Reduced Cross Section, Reinforced 1 E-Ring
External Series Type 3EM1 2-1 3-20 4-2 5-* 6-* 7-1
AER26 Retaining Rings, GP Tapered and Reduced Cross Section, C-Ring External Series
Type 3FM1 2-1 3-20 4-2 5-* 6-* 7-1
Screws
AES01 Screws, Cap, Hex (Finished Hex Bolt) 2-1 3-1 4-1 5-* 6-* 7-2
AES02 Screws, Hex, Heavy 2-1 3-1 4-1 5-* 6-* 7-2
AESA0 Screws, Hex Flange 2-1 3-1 4-1 5-* 6-* 7-2
AESA1 Screws, Lobed Head 2-1 3-1 4-1 5-* 6-* 7-2
AES03 Screws, Lag, Square Head, Gimlet Point 2-1 3-13 4-1 5-* 6-* 7-1
AES04 Screws, Lag, Square Head, Cone Point 2-1 3-13 4-1 5-* 6-* 7-1
AES05 Screws, Lag, Hex Head, Gimlet Point 2-1 3-13 4-1 5-* 6-* 7-1
AES06 Screws, Lag, Hex Head, Cone Point 2-1 3-13 4-1 5-* 6-* 7-1
B18.2.3.1M Metric Hex Cap Screws Field 2 3 4 5 6 7

AES07 Screws, Cap, Hex 2-1 3-3 4-2 5-* 6-* 7-2
14
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.2.3.2M Metric Formed Hex Screws Field 2 3 4 5 6 7

AES08 Screws, Hex, Formed 2-1 3-3 4-2 5-* 6-* 7-2
B18.2.3.3M Metric Heavy Hex Screws Field 2 3 4 5 6 7
AES09 Screws, Hex, Heavy 2-1 3-3 4-2 5-* 6-* 7-2
B18.2.3.4M Metric Hex Flange Screws Field 2 3 4 5 6 7
AES10 Screws, Hex, Flange 2-1 2-1 3-3 4-2 5-* 6-* 7-4
B18.2.3.8M Metric Hex Lag Screws Field 2 3 4 5 6 7

AES11 Screws, Lag, Hex Head, Gimlet Point 2-1 3-4 4-2 5-* 6-* 7-1
B18.2.3.9M Metric Heavy Hex Flange Screws Field 2 3 4 5 6 7

AES12 Screws, Heavy Hex, Flange 2-1 3-3 4-2 5-* 6-* 7-4
B18.2.5M Metric 12-Point Flange Screws Field 2 3 4 5 6 7

AESA2 Screws, 12-Point, Flange 2-1 3-3 4-2 5-* 6-* 7-4
B18.2.7.1M Metric 12-Spline Flange Screws Field 2 3 4 5 6 7

AES13 Screws, 12-Spline, Flange 2-1 3-3 4-2 5-* 6-* 7-5
B18.3 Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series) Field 2 3 4 5 6 7
AES14 Screws, Cap, Hex Socket Head 2-1 3-1 4-1 5-* 6-* 7-11
AES15 Screws, Cap, Spline Socket Head 2-1 3-1 4-1 5-* 6-* 7-2
AESA4 Screws, Cap, Hex Socket Low Head 2-1 3-1 4-1 5-* 6-* 7-2
AES16 Screws, Cap, Hex Socket, Flat Countersunk Head 2-1 3-1 4-1 5-* 6-* 7-2
AES17 Screws, Cap, Spline Socket, Flat Countersunk Head 2-1 3-1 4-1 5-* 6-* 7-2
AES18 Screws, Cap, Hex Socket, Button Head 2-1 3-1 4-1 5-* 6-* 7-2
AES19 Screws, Cap, Spline Socket, Button Head 2-1 3-1 4-1 5-* 6-* 7-2
AES20 Screws, Shoulder, Hex Socket Head 2-1 3-8 4-1 5-* 6-* 7-2
AES21 Screws, Set, Spline Socket, Cup Point Type, A 2-1 3-10 4-1 5-* 6-* 7-12
AES22 Screws, Set, Spline Socket, Small Cup Point, Type B 2-1 3-10 4-1 5-* 6-* 7-12
AES23 Screws, Set, Spline Socket, Knurled Cup Point, Type C 2-1 3-10 4-1 5-* 6-* 7-12
AES24 Screws, Set, Spline Socket, Hexagon Cup Point, Type D 2-1 3-10 4-1 5-* 6-* 7-12
AES25 Screws, Set, Spline Socket, W Cup Point, Type E 2-1 3-10 4-1 5-* 6-* 7-12
AES26 Screws, Set, Spline Socket, Nu-Cup Point, Type F 2-1 3-10 4-1 5-* 6-* 7-12
AES27 Screws, Set, Spline Socket, Nu-Cup Point, Type G 2-1 3-10 4-1 5-* 6-* 7-12
AES28 Screws, Set, Spline Socket, Cone Point 2-1 3-10 4-1 5-* 6-* 7-12
AES29 Screws, Set, Spline Socket, Flat Point 2-1 3-10 4-1 5-* 6-* 7-12
AES30 Screws, Set, Spline Socket, Half Dog Point 2-1 3-10 4-1 5-* 6-* 7-12
AES31 Screws, Set, Spline Socket, Oval Point 2-1 3-10 4-1 5-* 6-* 7-12
AES32 Screws, Set, Hex Socket, Cup Point, Type A 2-1 3-1 4-1 5-* 6-* 7-12
AES33 Screws, Set, Hex Socket, Small Cup Point, Type B 2-1 3-1 4-1 5-* 6-* 7-12
AES34 Screws, Set, Hex Socket, Knurled Cup Point, Type C 2-1 3-1 4-1 5-* 6-* 7-12
AES35 Screws, Set, Hex Socket, Hexagon Cup Point, Type D 2-1 3-1 4-1 5-* 6-* 7-12
AES36 Screws, Set, Hex Socket, W Cup Point, Type E 2-1 3-1 4-1 5-* 6-* 7-12
AES37 Screws, Set, Hex Socket, Nu-Cup Point, Type F 2-1 3-1 4-1 5-* 6-* 7-12
AES38 Screws, Set, Hex Socket, Nu-Cup Point, Type G 2-1 3-1 4-1 5-* 6-* 7-12
AES39 Screws, Set, Hex Socket, Cone Point 2-1 3-1 4-1 5-* 6-* 7-12
AES40 Screws, Set, Hex Socket, Flat Point 2-1 3-1 4-1 5-* 6-* 7-12
AES41 Screws, Set, Hex Socket, Half Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES42 Screws, Set, Hex Socket, Oval Point 2-1 3-1 4-1 5-* 6-* 7-12
15
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.3.1M Metric Socket Head Cap Screws Field 2 3 4 5 6 7

AES43 Screws, Cap, Hex Socket Head 2-1 3-3 4-2 5-* 6-* 7-11
AES44 Screws, Cap, Spline Socket Head 2-1 3-3 4-2 5-* 6-* 7-2
B18.3.3M Metric Hexagon Socket Head Shoulder Screws Field 2 3 4 5 6 7
AES45 Screws, Shoulder, Hex Socket 2-1 3-9 4-2 5-* 6-* 7-2
B18.3.4M Metric Socket Button Head Cap Screws Field 2 3 4 5 6 7
AES46 Screws, Cap, Hex Socket, Button Head 2-1 3-3 4-2 5-* 6-* 7-2
B18.3.5M Metric Hexagon Socket Flat Countersunk Head Cap Screws Field 2 3 4 5 6 7
AES47 Screws, Cap, Hex Socket Flat Countersunk Head 2-1 3-3 4-2 5-* 6-* 7-2
B18.3.6M Metric Socket Set Screws Field 2 3 4 5 6 7
AES48 Screws, Set, Spline Socket, Cup Point, Type I 2-1 3-3 4-2 5-* 6-* 7-12
AES49 Screws, Set, Spline Socket, Cup Point, Type II 2-1 3-3 4-2 5-* 6-* 7-12
AES50 Screws, Set, Spline Socket, Cup Point, Type III 2-1 3-3 4-2 5-* 6-* 7-12
AES51 Screws, Set, Spline Socket, Cup Point, Type IV 2-1 3-3 4-2 5-* 6-* 7-12
AES52 Screws, Set, Spline Socket, Cup Point, Type V 2-1 3-3 4-2 5-* 6-* 7-12
AES53 Screws, Set, Spline Socket, Cone Point 2-1 3-3 4-2 5-* 6-* 7-12
AES54 Screws, Set, Spline Socket, Flat Point 2-1 3-3 4-2 5-* 6-* 7-12
AES55 Screws, Set, Spline Socket, Half Dog Point 2-1 3-3 4-2 5-* 6-* 7-12
AES56 Screws, Set, Spline Socket, Oval Point 2-1 3-3 4-2 5-* 6-* 7-12
AES57 Screws, Set, Hex Socket, Cup Point, Type I 2-1 3-3 4-2 5-* 6-* 7-12
AES58 Screws, Set, Hex Socket, Cup Point, Type II 2-1 3-3 4-2 5-* 6-* 7-12
AES59 Screws, Set, Hex Socket, Cup Point, Type III 2-1 3-3 4-2 5-* 6-* 7-12
AES60 Screws, Set, Hex Socket, Cup Point, Type IV 2-1 3-3 4-2 5-* 6-* 7-12
AES61 Screws, Set, Hex Socket, Cup Point, Type V 2-1 3-3 4-2 5-* 6-* 7-12
B18.3.6M Metric Socket Set Screws (Cont’d) Field 2 3 4 5 6 7

AES62 Screws, Set, Hex Socket, Cone Point 2-1 3-3 4-2 5-* 6-* 7-12
AES63 Screws, Set, Hex Socket, Flat Point 2-1 3-3 4-2 5-* 6-* 7-12
AES64 Screws, Set, Hex Socket, Half Dog Point 2-1 3-3 4-2 5-* 6-* 7-12
AES65 Screws, Set, Hex Socket, Oval Point 2-1 3-3 4-2 5-* 6-* 7-12
B18.6.1 Wood Screws (Inch Series) Field 2 3 4 5 6 7

AES66 Screws, Wood, Flat Head, Slotted 2-1 3-12 4-1 5-* 6-* 7-10
AES67 Screws, Wood, Flat Head, Type I Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES68 Screws, Wood, Flat Head, Type IA Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES69 Screws, Wood, Flat Head, Type II Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES70 Screws, Wood, Oval Head, Slotted 2-1 3-12 4-1 5-* 6-* 7-10
AES71 Screws, Wood, Oval Head, Type I Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES72 Screws, Wood, Oval Head, Type IA Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES73 Screws, Wood, Oval Head, Type II Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES74 Screws, Wood, Pan Head, Slotted 2-1 3-12 4-1 5-* 6-* 7-10
AES75 Screws, Wood, Pan Head, Type I Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES76 Screws, Wood, Pan Head, Type IA Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
AES77 Screws, Wood, Pan Head, Type II Cross Recess 2-1 3-12 4-1 5-* 6-* 7-10
B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws
(Inch Series) Field 2 3 4 5 6 7
AES78 Screws, Cap, Flat Countersunk Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AES79 Screws, Cap, Round Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
16
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws
(Inch Series) (Cont’d) Field 2 3 4 5 6 7
AES80 Screws, Cap, Fillister Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AES81 Screws, Set, Square Head, Cup Point 2-1 3-1 4-1 5-* 6-* 7-12
AES82 Screws, Set, Square Head, Cone Point 2-1 3-1 4-1 5-* 6-* 7-12
AES83 Screws, Set, Square Head, Flat Point 2-1 3-1 4-1 5-* 6-* 7-12
AES84 Screws, Set, Square Head, Half Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES85 Screws, Set, Square Head, Full Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES86 Screws, Set, Square Head, Oval Point 2-1 3-1 4-1 5-* 6-* 7-12
AES87 Screws, Set, Square Head, Optional Relieved Neck, Cup Point 2-1 3-1 4-1 5-* 6-* 7-12
AES88 Screws, Set, Square Head, Optional Relieved Neck, Cone Point 2-1 3-1 4-1 5-* 6-* 7-12
AES89 Screws, Set, Square Head, Optional Relieved Neck, Flat Point 2-1 3-1 4-1 5-* 6-* 7-12
AES90 Screws, Set, Square Head, Optional Relieved Neck, Half Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES91 Screws, Set, Square Head, Optional Relieved Neck, Full Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES92 Screws, Set, Square Head, Optional Relieved Neck, Oval Point 2-1 3-1 4-1 5-* 6-* 7-12
AES93 Screws, Set, Slotted Headless, Cup Point 2-1 3-1 4-1 5-* 6-* 7-12
AES94 Screws, Set, Slotted Headless, Cone Point 2-1 3-1 4-1 5-* 6-* 7-12
AES95 Screws, Set, Slotted Headless, Flat Point 2-1 3-1 4-1 5-* 6-* 7-12
AES96 Screws, Set, Slotted Headless, Half Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES97 Screws, Set, Slotted Headless, Full Dog Point 2-1 3-1 4-1 5-* 6-* 7-12
AES98 Screws, Set, Slotted Headless, Oval Point 2-1 3-1 4-1 5-* 6-* 7-12
B18.6.3 Machine Screws, Tapping Screws and Metallic Drive Screws (Inch Series) Field 2 3 4 5 6 7
AESC0 Screws, Machine, Flat Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESC1 Screws, Machine, Flat Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC2 Screws, Machine, Flat Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC3 Screws, Machine, Flat Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC4 Screws, Machine, Flat Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESB1 Screws, Machine, Flat Head, Type VI Six-Lobe Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC5 Screws, Machine, Flat Head, 100 deg, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESC6 Screws, Machine, Flat Head, 100 deg, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC7 Screws, Machine, Flat Head, 100 deg, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC8 Screws, Machine, Flat Head, 100 deg, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESC9 Screws, Machine, Flat Head, Close Tolerance, 100 deg, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESD0 Screws, Machine, Flat Head, Close Tolerance, 100 deg, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD1 Screws, Machine, Flat Head, Close Tolerance, 100 deg, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD2 Screws, Machine, Flat Head, Close Tolerance, 100 deg, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD3 Screws, Machine, Oval Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESD4 Screws, Machine, Oval Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD5 Screws, Machine, Oval Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD6 Screws, Machine, Oval Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD7 Screws, Machine, Oval Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESB2 Screws, Machine, Oval Head, Type VI Six-Lobe Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESD8 Screws, Machine, Flat Head, Undercut, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESD9 Screws, Machine, Flat Head, Undercut, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE0 Screws, Machine, Flat Head, Undercut, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE1 Screws, Machine, Flat Head, Undercut, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE2 Screws, Machine, Flat Head, Undercut, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE3 Screws, Machine, Oval Undercut Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESE4 Screws, Machine, Oval Undercut Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE5 Screws, Machine, Oval Undercut Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE6 Screws, Machine, Oval Undercut Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
17
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.6.3 Machine Screws, Tapping Screws and Metallic Drive Screws (Inch Series) (Cont’d) Field 2 3 4 5 6 7
AESE7 Screws, Machine, Oval Undercut Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESE8 Screws, Machine, Flat Trim Head, Type I Cross Recess 2-1 3-11 4-1 5-* 6-* 7-2
AESE9 Screws, Machine, Flat Trim Head, Type IA Cross Recess 2-1 3-11 4-1 5-* 6-* 7-2
AESF0 Screws, Machine, Flat Trim Head, Type II Cross Recess 2-1 3-11 4-1 5-* 6-* 7-2
AESF1 Screws, Machine, Oval Trim Head, Type I Cross Recess 2-1 3-11 4-1 5-* 6-* 7-2
AESF2 Screws, Machine, Oval Trim Head, Type IA Cross Recess 2-1 3-11 4-1 5-* 6-* 7-2
AESF3 Screws, Machine, Oval Trim Head, Type II Cross Recess 2-1 3-11 4-1 5-* 6-* 7-2
AESF4 Screws, Machine, Pan Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESF5 Screws, Machine, Pan Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESF6 Screws, Machine, Pan Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESF7 Screws, Machine, Pan Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESF8 Screws, Machine, Pan Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESB3 Screws, Machine, Pan Head, Type VI Six-Lobe Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESF9 Screws, Machine, Pan Head, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AESG0 Screws, Machine, Pan Head, Type IA Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AESG1 Screws, Machine, Pan Head, Type III Square Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AESG2 Screws, Machine, Fillister Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESG3 Screws, Machine, Fillister Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESG4 Screws, Machine, Fillister Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESG5 Screws, Machine, Fillister Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESG6 Screws, Machine, Fillister Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESB4 Screws, Machine, Fillister Head, Type VI Six-Lobe Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESG7 Screws, Machine, Fillister Head, Slotted and Drilled 2-1 3-1 4-1 5-* 6-* 7-2
AESG8 Screws, Machine, Truss Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESG9 Screws, Machine, Truss Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH0 Screws, Machine, Truss Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH1 Screws, Machine, Truss Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH2 Screws, Machine, Truss Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESB5 Screws, Machine, Truss Head, Type VI Six-Lobe Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH3 Screws, Machine, Truss Head, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AESH4 Screws, Machine, Truss Head, Type III Square Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AESH5 Screws, Machine, Binding Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESH6 Screws, Machine, Binding Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH7 Screws, Machine, Binding Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH8 Screws, Machine, Binding Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESH9 Screws, Machine, Binding Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESJ0 Screws, Machine, Regular Hex Head, Indented, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ1 Screws, Machine, Regular Hex Head, Indented, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ2 Screws, Machine, Regular Hex Head, Trimmed, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ3 Screws, Machine, Regular Hex Head, Trimmed, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ4 Screws, Machine, Regular Hex Head, Fully Upset, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ5 Screws, Machine, Regular Hex Head, Fully Upset, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ6 Screws, Machine, Large Hex Head, Indented, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ7 Screws, Machine, Large Hex Head, Indented, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ8 Screws, Machine, Large Hex Head, Trimmed, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESJ9 Screws, Machine, Large Hex Head, Trimmed, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESK0 Screws, Machine, Large Hex Head, Fully Upset, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESK1 Screws, Machine, Large Hex Head, Fully Upset, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESK2 Screws, Machine, Regular Hex Head, Indented, Type I Recess 2-1 3-1 4-1 5-* 6-* 7-2
AES1B Screws, Machine, Regular Hex Head, Indented, Type VI Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESK3 Screws, Machine, Regular Hex Head, Trimmed, Type I Recess 2-1 3-1 4-1 5-* 6-* 7-2
18
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.6.3 Machine Screws, Tapping Screws and Metallic Drive Screws (Inch Series) (Cont’d) Field 2 3 4 5 6 7
AESK4 Screws, Machine, Regular Hex Head, Fully Upset, Type I Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESK5 Screws, Machine, Large Hex Head, Indented, Type I Recess 2-1 3-1 4-1 5-* 6-* 7-2
AES1C Screws, Machine, Large Hex Head, Indented, Type VI Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESK6 Screws, Machine, Large Hex Head, Trimmed, Type I Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESK7 Screws, Machine, Large Hex Head, Fully Upset, Type I Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESK8 Screws, Machine, Hex Washer Head, Indented, Unslotted 2-1 3-1 4-1 5-* 6-* 7-2
AESK9 Screws, Machine, Hex Washer Head, Indented, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESL0 Screws, Machine, Hex Washer Head, Indented, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL1 Screws, Machine, Hex Washer Head, Indented, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AES1D Screws, Machine, Hex Washer Head, Indented, Type VI Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL2 Screws, Machine, Round Washer Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESL3 Screws, Machine, Round Washer Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESB6 Screws, Machine, Round Washer Head, Type VI Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL4 Screws, Machine, Round Head, Slotted 2-1 3-1 4-1 5-* 6-* 7-2
AESL5 Screws, Machine, Round Head, Type I Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL6 Screws, Machine, Round Head, Type IA Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL7 Screws, Machine, Round Head, Type II Cross Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL8 Screws, Machine, Round Head, Type III Square Recess 2-1 3-1 4-1 5-* 6-* 7-2
AESL9 Screws, Machine, Round Head, Type I Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
AESM0 Screws, Machine, Round Head, Type IA Cross Recess with Slot 2-1 3-1 4-1 5-* 6-* 7-2
B18.6.4 Thread Forming and Thread Cutting Tapping Screws and

Metallic Drive Screws (Inch Series) Field 2 3 4 5 6 7
AESM1 Screws, Tapping, Flat Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESM2 Screws, Tapping, Flat Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESM3 Screws, Tapping, Flat Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESM4 Screws, Tapping, Flat Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESM6 Screws, Tapping, 100 deg, Flat Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESM7 Screws, Tapping, 100 deg, Flat Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESM8 Screws, Tapping, 100 deg, Flat Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESM9 Screws, Tapping, 100 deg, Flat Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESB7 Screws, Tapping, Flat Head, Type VI Six-Lobe Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESN0 Screws, Tapping, Oval Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESN1 Screws, Tapping, Oval Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESN2 Screws, Tapping, Oval Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESN3 Screws, Tapping, Oval Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESN5 Screws, Tapping, Flat Head, Undercut, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESN6 Screws, Tapping, Flat Head, Undercut, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESN7 Screws, Tapping, Flat Head, Undercut, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESN8 Screws, Tapping, Flat Head, Undercut, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP0 Screws, Tapping, Oval Undercut Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESP1 Screws, Tapping, Oval Undercut Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP2 Screws, Tapping, Oval Undercut Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESB8 Screws, Tapping, Oval Head, Type VI Six-Lobe Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP3 Screws, Tapping, Oval Undercut Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP5 Screws, Tapping, Flat Trim Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP6 Screws, Tapping, Flat Trim Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP7 Screws, Tapping, Flat Trim Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP8 Screws, Tapping, Oval Trim Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESP9 Screws, Tapping, Oval Trim Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESQ0 Screws, Tapping, Oval Trim Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
19
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.6.4 Thread Forming and Thread Cutting Tapping Screws and

Metallic Drive Screws (Inch Series) (Cont’d) Field 2 3 4 5 6 7
AESQ1 Screws, Tapping, Pan Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESQ2 Screws, Tapping, Pan Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESQ3 Screws, Tapping, Pan Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESQ4 Screws, Tapping, Pan Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESB9 Screws, Tapping, Pan Head, Type VI Six-Lobe Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESQ9 Screws, Tapping, Fillister Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESR0 Screws, Tapping, Fillister Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESR1 Screws, Tapping, Fillister Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESR2 Screws, Tapping, Fillister Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AES1A Screws, Tapping, Fillister Head, Type VI Six-Lobe Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESR4 Screws, Tapping, Truss Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESR5 Screws, Tapping, Truss Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESR6 Screws, Tapping, Truss Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESR7 Screws, Tapping, Truss Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AES2K Screws, Tapping, Truss Head, Type VI Six-Lobe Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESS1 Screws, Tapping, Regular Hex Head, Indented, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS2 Screws, Tapping, Regular Hex Head, Indented, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS3 Screws, Tapping, Regular Hex Head, Trimmed, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS4 Screws, Tapping, Regular Hex Head, Trimmed, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS5 Screws, Tapping, Regular Hex Head, Fully Upset, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS6 Screws, Tapping, Regular Hex Head, Fully Upset, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS7 Screws, Tapping, Large Hex Head, Indented, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS8 Screws, Tapping, Large Hex Head, Indented, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESS9 Screws, Tapping, Large Hex Head, Trimmed, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AEST0 Screws, Tapping, Large Hex Head, Trimmed, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AEST1 Screws, Tapping, Large Hex Head, Fully Upset, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AEST2 Screws, Tapping, Large Hex Head, Fully Upset, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AEST3 Screws, Tapping, Regular Hex Head, Indented, Type I Recess 2-2 3-6 4-1 5-* 6-* 7-1
AES1E Screws, Tapping, Regular Hex Head, Indented, Type VI Recess 2-2 3-6 4-1 5-* 6-* 7-1
AEST4 Screws, Tapping, Regular Hex Head, Trimmed, Type I Recess 2-2 3-6 4-1 5-* 6-* 7-1
AEST5 Screws, Tapping, Regular Hex Head, Fully Upset, Type I Recess 2-2 3-6 4-1 5-* 6-* 7-1
AEST6 Screws, Tapping, Large Hex Head, Indented, Type I Recess 2-2 3-6 4-1 5-* 6-* 7-1
AES1F Screws, Tapping, Large Hex Head, Indented, Type VI Recess 2-2 3-6 4-1 5-* 6-* 7-1
AEST7 Screws, Tapping, Large Hex Head, Trimmed, Type I Recess 2-2 3-6 4-1 5-* 6-* 7-1
AEST8 Screws, Tapping, Large Hex Head, Fully Upset, Type I Recess 2-2 3-6 4-1 5-* 6-* 7-1
AEST9 Screws, Tapping, Hex Washer Head, Indented, Unslotted 2-2 3-6 4-1 5-* 6-* 7-1
AESU0 Screws, Tapping, Hex Washer Head, Indented, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESU1 Screws, Tapping, Hex Washer Head, Indented, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AES1G Screws, Tapping, Hex Washer Head, Indented, Type VI Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESU3 Screws, Tapping, Round Washer Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESU4 Screws, Tapping, Round Washer Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESA3 Screws, Tapping, Round Washer Head, Type VI Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESU5 Screws, Tapping, Round Head, Slotted 2-2 3-6 4-1 5-* 6-* 7-1
AESU6 Screws, Tapping, Round Head, Type I Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESU7 Screws, Tapping, Round Head, Type IA Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESU8 Screws, Tapping, Round Head, Type II Cross Recess 2-2 3-6 4-1 5-* 6-* 7-1
AESV2 Screws, Tapping, Round Head Type U Metallic Drive 2-2 3-2 4-1 5-* 6-* 7-1
B18.6.5M Metric Thread-Forming and Thread-Cutting Tapping Screws Field 2 3 4 5 6 7
AESV3 Screws, Tapping, Flat Head, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
AESV4 Screws, Tapping, Flat Head, Type A, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
20
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.6.5M Metric Thread-Forming and Thread-Cutting Tapping Screws (Cont’d) Field 2 3 4 5 6 7

AESV5 Screws, Tapping, Flat Head, Type A, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESV6 Screws, Tapping, Flat Head, Type A, Type III Square Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESV7 Screws, Tapping, Flat Head, Type B, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESV8 Screws, Tapping, Flat Head, Type B, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESV9 Screws, Tapping, Flat Head, Type B, Type III Square Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESW0 Screws, Tapping, Oval Head, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
AESW1 Screws, Tapping, Oval Head, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESW2 Screws, Tapping, Oval Head, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESW3 Screws, Tapping, Oval Head, Type III Square Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESW4 Screws, Tapping, Pan Head, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
AESW5 Screws, Tapping, Pan Head, Type I Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESW6 Screws, Tapping, Pan Head, Type IA Cross Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESW7 Screws, Tapping, Pan Head, Type III Square Recess 2-2 3-7 4-2 5-* 6-* 7-1
AESX1 Screws, Tapping, Hex Head, Indented, Unslotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX2 Screws, Tapping, Hex Head, Indented, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX3 Screws, Tapping, Hex Head, Trimmed, Unslotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX4 Screws, Tapping, Hex Head, Trimmed, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX5 Screws, Tapping, Hex Head, Fully Upset, Unslotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX6 Screws, Tapping, Hex Head, Fully Upset, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX7 Screws, Tapping, Hex Flange Head, Unslotted 2-2 3-7 4-2 5-* 6-* 7-1
AESX8 Screws, Tapping, Hex Flange Head, Slotted 2-2 3-7 4-2 5-* 6-* 7-1
B18.6.7M Metric Machine Screws Field 2 3 4 5 6 7

AESY0 Screws, Machine, Flat Head, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESY1 Screws, Machine, Flat Head, Type A, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY2 Screws, Machine, Flat Head, Type A, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY3 Screws, Machine, Flat Head, Type A, Type III Square Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY4 Screws, Machine, Flat Head, Type B, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY5 Screws, Machine, Flat Head, Type B, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY6 Screws, Machine, Flat Head, Type B, Type III Square Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY7 Screws, Machine, Oval Head, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESY8 Screws, Machine, Oval Head, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESY9 Screws, Machine, Oval Head, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESZ0 Screws, Machine, Oval Head, Type III Square Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESZ1 Screws, Machine, Pan Head, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZ2 Screws, Machine, Pan Head, Type I Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESZ3 Screws, Machine, Pan Head, Type IA Cross Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESZ4 Screws, Machine, Pan Head, Type III Square Recess 2-1 3-3 4-2 5-* 6-* 7-2
AESZ8 Screws, Machine, Hex Head, Indented, Unslotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZ9 Screws, Machine, Hex Head, Indented, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZA Screws, Machine, Hex Head, Trimmed, Unslotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZB Screws, Machine, Hex Head, Trimmed, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZC Screws, Machine, Hex Head, Fully Upset, Unslotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZD Screws, Machine, Hex Head, Fully Upset, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZE Screws, Machine, Hex Flange Head, Slotted 2-1 3-3 4-2 5-* 6-* 7-2
AESZF Screws, Machine, Hex Flange Head, Unslotted 2-1 3-3 4-2 5-* 6-* 7-2
B18.6.8 Thumb Screws and Wing Screws (Inch Series) Field 2 3 4 5 6 7

AES2A Type A, Regular Thumb Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2B Type A, Heavy Thumb Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2C Type B, Regular Thumb Screws 2-1 3-1 4-1 5-* 6-* 7-14
21
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Screws (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.6.8 Thumb Screws and Wing Screws (Inch Series) (Cont’d) Field 2 3 4 5 6 7
AES2D Type B, Heavy Thumb Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2E Type A, Wing Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2F Type B, Style 1 Wing Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2G Type B, Style 2 Wing Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2H Type C, Style 1 Wing Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2I Type C, Style 2 Wing Screws 2-1 3-1 4-1 5-* 6-* 7-14
AES2J Type D, Wing Screws 2-1 3-1 4-1 5-* 6-* 7-14
B18.11 Miniature Screws (Inch Series) Field 2 3 4 5 6 7

AESZG Screws, Miniature, Fillister Head 2-1 3-5 4-3 5-* 6-* 7-1
AESZH Screws, Miniature, Pan Head 2-1 3-5 4-3 5-* 6-* 7-1
AESZJ Screws, Miniature, 100 deg Flat Head 2-1 3-5 4-3 5-* 6-* 7-1
AESZK Screws, Miniature, Binding Head 2-1 3-5 4-3 5-* 6-* 7-1
Studs For Continuous and Double End Stud part numbers reference SAE J2271 —
Ship Systems and Equipment — Part Standard for Studs — Continuous and
Double End (Inch Series)
B18.15 Forged Eyebolts (Inch Series) Field 2 3 4 5 6 7

AET01 Bolts, Eye, Straight Shank, Type 1, Plain Pattern Style A 2-1 3-1 4-6 5-* 6-* 7-1
AET02 Bolts, Eye, Straight Shank, Type 1, Plain Pattern Style B 2-1 3-1 4-6 5-* 6-* 7-1
AET03 Bolts, Eye, Shoulder Pattern, Type 2, Style A 2-1 3-1 4-6 5-* 6-* 7-1
AET04 Bolts, Eye, Shoulder Pattern, Type 2, Style B 2-1 3-1 4-6 5-* 6-* 7-1
B18.15M Metric Lifting Eyes Field 2 3 4 5 6 7

AET05 Lifting Eye, Forged 2-1 3-3 4-2 5-* 6-* 7-1
18.15.2M Metric Straight Shank Lifting Eyes Field 2 3 4 5 6 7

AET06 Lifting Eye, Straight Shank 2-1 3-3 4-2 5-* 6-* 7-1
B18.31.1M Metric Continuous and Double-Ended Studs Field 2 3 4 5 6 7

AET07 Studs, Continuous Thread 2-1 3-3 4-2 5-* 6-* 7-2
AET08 Studs, Double End (Clamping Type) 2-1 3-3 4-2 5-* 6-* 7-2
AET09 Studs, Double End (Tap End Type) 2-1 3-3 4-2 5-* 6-* 7-2
Rivets
B18.1.1 Small Solid Rivets (Inch Series) Field 2 3 4 5 6 7
AEV01 Rivets, Small, Solid, Flat Head 2-1 3-2 4-1 5-* 6-* 7-3
AEV02 Rivets, Small, Solid, Flat Countersunk Head 2-1 3-2 4-1 5-* 6-* 7-3
AEV03 Rivets, Small, Solid, Button Head 2-1 3-2 4-1 5-* 6-* 7-3
AEV04 Rivets, Small, Solid, Pan Head 2-1 3-2 4-1 5-* 6-* 7-3
AEV05 Rivets, Small, Solid, Truss Head 2-1 3-2 4-1 5-* 6-* 7-3
AEV06 Rivets, Small, Solid, Tinners 2-1 3-14 4-1 5-* 6-* 7-3
AEV07 Rivets, Small, Solid, Coopers 2-1 3-14 4-1 5-* 6-* 7-3
AEV08 Rivets, Small, Solid, Belt 2-1 3-15 4-1 5-* 6-* 7-3
AEV09 Rivets, Small, Solid, 60 deg, Flat Countersunk Head 2-1 3-15 4-1 5-* 6-* 7-3
B18.1.2 Large Rivets (Inch Series) Field 2 3 4 5 6 7

AEV10 Rivets, Large, Button Head 2-1 3-2 4-1 5-* 6-* 7-6
AEV11 Rivets, Large, High Button (Acorn) Head 2-1 3-2 4-1 5-* 6-* 7-6
AEV12 Rivets, Large, Cone Head 2-1 3-2 4-1 5-* 6-* 7-6
22
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Rivets (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.1.2 Large Rivets (Inch Series) (Cont’d) Field 2 3 4 5 6 7

AEV13 Rivets, Large, Flat Countersunk Head 2-1 3-2 4-1 5-* 6-* 7-6
AEV14 Rivets, Large, Oval Countersunk Head 2-1 3-2 4-1 5-* 6-* 7-6
AEV15 Rivets, Large, Pan Head 2-1 3-2 4-1 5-* 6-* 7-6
B18.1.3M Metric Small Solid Rivets Field 2 3 4 5 6 7
AEV16 Rivets, Small, Solid, Flat Head 2-1 3-4 4-2 5-* 6-* 7-3
AEV17 Rivets, Small, Solid, Round Head 2-1 3-4 4-2 5-* 6-* 7-3
AEV18 Rivets, Small, Solid, Flat Countersunk Head 2-1 3-4 4-2 5-* 6-* 7-3
B18.7 General Purpose Semi-Tubular Rivets, Full Tubular Rivets,
Split Rivets, and Rivet Caps (Inch Series) Field 2 3 4 5 6 7
AEV19 Rivets, General Purpose, Oval Head Semi-Tubular, Type T 2-1 3-16 4-1 5-* 6-* 7-1
AEV20 Rivets, General Purpose, Oval Head Semi-Tubular, Type S 2-1 3-16 4-1 5-* 6-* 7-1
AEV21 Rivets, General Purpose, Truss Head Semi-Tubular, Type T 2-1 3-16 4-1 5-* 6-* 7-1
AEV22 Rivets, General Purpose, Truss Head Semi-Tubular, Type S 2-1 3-16 4-1 5-* 6-* 7-1
AEV23 Rivets, General Purpose, 150 deg Flat C sunk Head Semi-Tubular 2-1 3-16 4-1 5-* 6-* 7-1
AEV24 Rivets, General Purpose, 150 deg Large Flat C sunk Head Semi-Tubular 2-1 3-16 4-1 5-* 6-* 7-1
AEV25 Rivets, General Purpose, 120 deg Flat C sunk Head Semi-Tubular Type T 2-1 3-16 4-1 5-* 6-* 7-1
AEV26 Rivets, General Purpose, 120 deg Flat C sunk Head Semi-Tubular Type S 2-1 3-16 4-1 5-* 6-* 7-1
AEV27 Rivets, General Purpose, Full Tubular Oval 2-1 3-16 4-1 5-* 6-* 7-1
AEV28 Rivets, General Purpose, Full Tubular Truss 2-1 3-16 4-1 5-* 6-* 7-1
AEV29 Rivets, General Purpose, Full Tubular Flat Countersunk 2-1 3-16 4-1 5-* 6-* 7-1
AEV30 Rivets, General Purpose, Oval Head Split 2-1 3-16 4-1 5-* 6-* 7-1
AEV31 Rivets, General Purpose, Flat Countersunk Head Split 2-1 3-16 4-1 5-* 6-* 7-1
AEV32 Rivets, General Purpose, Cap Style 1 2-1 3-17 4-1 5-* 6-* 7-1
AEV33 Rivets, General Purpose, Cap Style 2 2-1 3-17 4-1 5-* 6-* 7-1
B18.7.1M Metric General Purpose Semi-Tubular Rivets Field 2 3 4 5 6 7
AEV34 Rivets, General Purpose, Oval Head Semi-Tubular 2-1 3-4 4-2 5-* 6-* 7-1
Washers
AEW01 Washers, Structural, Hardened Steel Circular 2-1 3-2 4-1 5-* 6-* 7-1
AEW02 Washers, Structural, Hardened Steel Circular Clipped 2-1 3-2 4-1 5-* 6-* 7-1
AEW03 Washers, Structural, Hardened Square Beveled 2-1 3-2 4-1 5-* 6-* 7-1
AEW04 Washers, Structural, Hardened Clipped Square Beveled 2-1 3-2 4-1 5-* 6-* 7-1
AEW05 Washers, Structural, Compressible, Type Direct Tension Indicators (ASTM A490) 2-1 3-2 4-1 5-* 6-* 7-1
AEW06 Washers, Structural, Compressible, Type Direct Tension Indicators (ASTM A325) 2-1 3-2 4-1 5-* 6-* 7-1
B18.2.6M Metric Fasteners for Use in Structural Applications Field 2 3 4 5 5 7
AEW27 Metric Hardened Steel Circular 2-1 3-2 4-1 5-* 6-* 7-1
AEW28 Metric Hardened Steel Circular Clipped 2-1 3-2 4-1 5-* 6-* 7-1
AEW29 Metric Compressible Washer-Type Direct Tension Indicator with Curved Protrusion 2-1 3-2 4-1 5-* 6-* 7-1
AEW30 Metric Compressible Washer-Type Direct Tension Indicator with Straight Protrusion 2-1 3-2 4-1 5-* 6-* 7-1
B18.21.1 Helical, Spring-Lock, Tooth Lock and Plain Washers (Inch Series) Field 2 3 4 5 6 7
AEW07 Washers, Lock, Regular Helical Spring 2-1 3-1 4-1 5-* 6-* 7-1
AEW08 Washers, Lock, Heavy Helical Spring 2-1 3-1 4-1 5-* 6-* 7-1
AEW09 Washers, Lock, Extra Duty Helical Spring 2-1 3-1 4-1 5-* 6-* 7-1
AEW10 Washers, Lock, Hi-Collar Helical Spring 2-1 3-1 4-1 5-* 6-* 7-1
AEW11 Washers, Lock, Internal Tooth 2-1 3-1 4-1 5-* 6-* 7-1
23
ASME 18.24-2015

GENERAL NOTES:
older PIN codes.
Washers (Cont’d)
er
i al
e
Oth
ead
tur
h
ter
Applicable
is
e
L g/
Fea
Thr
Ma
Siz
Fin
Table References:
B18.21.1 Helical, Spring-Lock, Tooth Lock and Plain Washers (Inch Series) (Cont’d) Field 2 3 4 5 6 7
AEW12 Washers, Lock, Heavy Internal Tooth 2-1 3-1 4-1 5-* 6-* 7-1
AEW13 Washers, Lock, External Tooth 2-1 3-1 4-1 5-* 6-* 7-1
AEW14 Washers, Lock, Countersunk External Tooth 2-1 3-1 4-1 5-* 6-* 7-1
AEW15 Washers, Lock, Internal-External Tooth 2-1 3-25 4-1 5-* 6-* 7-1
AEW24 Washers, Type A Plain Washer 2-1 3-22 4-1 5-* 6-* 7-1
AEW26 Washers, Type B Plain Washer 2-1 3-24 4-1 5-* 6-* 7-1
AEW31 Washers, Fender 2-1 3-1 4-1 5-* 6-* 7-1
B18.21.2M Metric Lock Washers Field 2 3 4 5 6 7

AEW16 Washers, Lock, Regular Helical Spring 2-1 3-4 4-2 5-* 6-* 7-1
AEW17 Washers, Lock, Heavy Helical Spring 2-1 3-4 4-2 5-* 6-* 7-1
AEW18 Washers, Lock, Internal Tooth 2-1 3-4 4-2 5-* 6-* 7-1
AEW19 Washers, Lock, Heavy Internal Tooth 2-1 3-4 4-2 5-* 6-* 7-1
AEW20 Washers, Lock, External Tooth 2-1 3-4 4-2 5-* 6-* 7-1
AEW21 Washers, Lock, Countersunk External Tooth 2-1 3-4 4-2 5-* 6-* 7-1
AEW22 Washers, Lock, External-Internal Tooth 2-1 3-27 4-2 5-* 6-* 7-1
B18.22M Metric Plain Washers Field 2 3 4 5 6 7

AEW23 Washers, Plain 2-1 3-26 4-2 5-* 6-* 7-1
B18.22.1 Plain Washers (Inch Series) Field 2 3 4 5 6 7

AEW24 Washers, Type A Plain Washer 2-1 3-22 4-1 5-* 6-* 7-1
AEW26 Washers, Type B Plain Washer 2-1 3-23 4-1 5-* 6-* 7-1
AEW25 Washers, Plain, Type A Selected Sizes 2-1 3-23 4-1 5-* 6-* 7-1
24
ASME B18.24-2015
Table 2-1 Thread Type Table 2-2 Thread and Point Table 3-1 Inch Thread (Cont’d)
PIN Thread Series
Options for Tapping Screws PIN Size Dia. (in.)
(Cont’d)
C [Note (1)] UNC-2 A06 11⁄16 1.0625
PIN Description
1
U [Note (1)] UNC-3 A12 1 ⁄8 1.125
T Type T Thread Cutting Tapping 13
F [Note (1)] UNF-2 A18 ⁄16 1.1875
Screw
1
K [Note (1)] UNF-3 A25 1 ⁄4 1.250
E Type TRS Thread TT Tapping Screw
R [Note (1)] UNRC-2 A31 - 1.3125
K Type TRS Thread RL Tapping Screw
Q [Note (1)] UNRF-2 A37 13⁄8 1.375
M Type TRS Thread TR-3 Tapping
E [Note (1)] UNEF-2 Screw A43 - 1.4375
N UNM S Type TRS Thread SF Tapping Screw A50 11⁄2 1.500
S [Note (1)] 1-14 UNS-2 and small 5
W Type TRS Thread SW Tapping A62 1 ⁄8 1.625
machine screw NS Screw A75 13⁄4 1.750
threads
Z Type A Thread Forming Tapping A87 1 ⁄87
1.875
D 6UN Screw
B00 2 2.000
G 8UN U Type U Metallic Drive Screw
B25 21⁄4 2.250
H 8UNR
B50 21⁄2 2.500
B 12UN Table 3-1 Inch Thread 3
B75 2 ⁄4 2.750
L Lag Screw Thread
PIN Size Dia. (in.)
C00 3 3.000
W Wood Screw Thread
021 0000 .021-160 NS only C25 31⁄4 3.250
M [Note (2)] Metric
034 000 .034-120 NS only C50 31⁄2 3.500
X Nonthreaded Fastener
04A 00 .047-90 NS-2 only 3
C75 3 ⁄4 3.750
NOTES: 04B 00 .047-96 NS-2 only D00 4 4.000
(1) -2 or -3 refers to -2A and -2B or -3A
and -3B, respectively, as applicable. 060 0 .060 D25 41⁄4 4.250
(2) Metric, except where PINs ’L’, "W", or 073 1 .073 D50 41⁄2 4.500
’X’ are applicable. 086 2 .086 3
D75 4 ⁄4 4.750
Table 2-2 Thread and Point 099 3 .099 E00 5 5.000

Options for Tapping Screws 112 4 .112 E25 51⁄4 5.250
PIN Description 125 5 .125 E50 5 ⁄21
5.500
138 6 .138 E75 53⁄4 5.750
A Type AB Thread Forming Tapping
Screw 164 8 .164 F00 6 6.000
H Type ABR Thread Forming Tapping 190 10 .190
Screw 216 12 .216
Table 3-2 Inch Size
B Type B Thread Forming Tapping 1
250 ⁄4 .250
Screw PIN Size Size/Length (in.)
268 14 .268
L Type BF Thread Cutting Tapping 5 031 1
⁄32 .031
312 ⁄16 .3125
Screw
375 3
⁄8 .375 039 - .039
P Type BP Thread Forming Tapping
3
Screw 438 7
⁄16 .4375 047 ⁄64 .047
1 052 - .052
R Type BT Thread Cutting Tapping 500 ⁄2 .500
Screw 562 9
⁄16 .5625 060 - .060
C Type C Thread Forming Tapping 625 5
⁄8 .625 062 1
⁄16 .062
Screw
688 - .6875 075 - .075
D Type D Thread Cutting Tapping 5
3 078 ⁄64 .078
Screw 750 ⁄4 .750
13 3
F Type F Thread Cutting Tapping 812 ⁄16 .8125 093 ⁄32 .093
Screw 875 7
⁄8 .875 100 - .100
G Type G Thread Cutting Tapping 938 15
⁄16 .9375 109 7
⁄64 .109
Screw
A00 1 1.000 116 - .116
25
ASME B18.24-2015
Table 3-2 Inch Size (Cont’d) Table 3-2 Inch Size (Cont’d) Table 3-2 Inch Size (Cont’d)
PIN Size Size/Length (in.) PIN Size Size/Length (in.) PIN Size Size/Length (in.)
1
125 ⁄8 .125 B75 23⁄4 2.750 H25 81⁄4 8.250
7 3
140 - .140 B87 2 ⁄8 2.875 H37 8 ⁄8 8.375
9
141 ⁄64 .141 C00 3 3.000 H50 81⁄2 8.500
1 3
154 - .154 C12 3 ⁄8 3.125 H75 8 ⁄4 8.750
5
156 ⁄32 .156 C25 31⁄4 3.250 J00 9 9.000
167 - .167 C37 33⁄8 3.375 J25 91⁄4 9.250
182 - .182 C50 31⁄2 3.500 J50 91⁄2 9.500
5 3
187 - .187 C62 3 ⁄8 3.625 J75 9 ⁄4 9.750
3
188 ⁄16 .188 C75 33⁄4 3.750 K00 10 10.000
212 - .212 C87 37⁄8 3.875 K02 101⁄4 10.250
7
219 ⁄32 .219 D00 4 4.000 K05 101⁄2 10.500
1 3
242 - .242 D12 4 ⁄8 4.125 K07 10 ⁄4 10.750
1
250 ⁄4 .250 D25 41⁄4 4.250 K10 11 11.000
9
281 ⁄32 .281 D37 43⁄8 4.375 K12 111⁄4 11.250
5 1
312 ⁄16 .312 D50 4 ⁄2 4.500 K15 111⁄2 11.500
5 3
315 - .315 D62 4 ⁄8 4.625 K17 11 ⁄4 11.750
11
344 ⁄32 .344 D75 43⁄4 4.750 K20 12 12.000
23
359 ⁄64 .359 D87 47⁄8 4.875 K22 121⁄4 12.250
3
375 ⁄8 .375 E00 5 5.000 K25 121⁄2 12.500
1 3
378 - .378 E12 5 ⁄8 5.125 K27 12 ⁄4 12.750
13
406 ⁄32 .406 E25 51⁄4 5.250 K30 13 13.000
7
438 ⁄16 .438 E37 5 3⁄8 5.375 K40 14 14.000
1
500 ⁄2 .500 E50 51⁄2 5.500 K50 15 15.000
9 5
562 ⁄16 .562 E62 5 ⁄8 5.625 K60 16 16.000
5
625 ⁄8 .625 E75 53⁄4 5.750 K70 17 17.000
11 7
688 ⁄16 .688 E87 5 ⁄8 5.875 K80 18 18.000
3
750 ⁄4 .750 F00 6 6.000 K90 19 19.000
13 1
812 ⁄16 .812 F12 6 ⁄8 6.125 L00 20 20.000
7
875 ⁄8 .875 F25 61⁄4 6.250
15
938 ⁄16 .938 F37 63⁄8 6.375
Table 3-3 Metric Thread
A00 1 1.000 F50 61⁄2 6.500
PIN Diameter (mm)/Pitch
A12 11⁄8 1.125 F62 65⁄8 6.625
A25 11⁄4 1.250 F75 63⁄4 6.750 163 M1.6 x 0.35
3 7
A37 1 ⁄8 1.375 F87 6 ⁄8 6.875 204 M2 x 0.4
A50 11⁄2 1.500 G00 7 7.000 254 M2.5 x 0.45
5 1
A62 1 ⁄8 1.625 G12 7 ⁄8 7.125 305 M3 x 0.5
A75 13⁄4 1.750 G25 71⁄4 7.250 356 M3.5 x 0.6
7 3
A87 1 ⁄8 1.875 G37 7 ⁄8 7.375 407 M4 x 0.7
B00 2 2.000 G50 71⁄2 7.500 508 M5 x 0.8
1 5
B12 2 ⁄8 2.125 G62 7 ⁄8 7.625 06A M6 x 1
B25 21⁄4 2.250 G75 73⁄4 7.750 07B M7 x 1
3 7
B37 2 ⁄8 2.375 G87 7 ⁄8 7.875 08B M8 x 1.25
1
B50 2 ⁄2 2.500 H00 8 8.000 08A M8 x 1
B62 25⁄8 2.625 H12 81⁄8 8.125 10Z M10 x 1.5 (15 mm WAF)
26
ASME B18.24-2015
Table 3-3 Metric Thread Table 3-3 Metric Thread Table 3-4 Metric Size (Cont’d)
(Cont’d) (Cont’d) PIN Size/Length (mm)
PIN Diameter (mm)/Pitch PIN Diameter (mm)/Pitch
014 14
10C M10 x 1.5 42E M42 x 2 015 15
10B M10 x 1.25 45C M45 x 1.5 016 16
10A M10 x 1 48L M48 x 5 017 17
107 M10 x 0.75 48E M48 x 2 018 18
12D M12 x 1.75 50C M50 x 1.5 019 19
12C M12 x 1.5 56M M56 x 5.5 020 20
12B M12 x 1.25 64N M64 x 6 021 21
12A M12 x 1 72N M72 x 6 022 22
14E M14 x 2 80N M80 x 6 023 23
14C M14 x 1.5 90N M90 x 6 024 24
15A M15 x 1 C0N M100 x 6 025 25
16E M16 x 2 026 26
07B M7 x 1 Table 3-4 Metric Size 027 27
16C M16 x 1.5 PIN Size/Length (mm) 028 28
17A M17 x 1 06M 0.6 030 30
18C M18 x 1.5 08M 0.8 032 32
18E M18 x 2 10M 1.0 033 33
18F M18 x 2.5 12M 1.2 034 34
20F M20 x 2.5 14M 1.4 035 35
20C M20 x 1.5 15M 1.5 036 36
20E M20 x 2 16M 1.6 037 37
20A M20 x 1 20M 2.0 038 38
22F M22 x 2.5 22M 2.2 040 40
22C M22 x 1.5 25M 2.5 042 42
24G M24 x 3 29M 2.9 045 45
24E M24 x 2 30M 3.0 046 46
25C M25 x 1.5 32M 3.2 047 47
27G M27 x 3 35M 3.5 048 48
27E M27 x 2 40M 4.0 050 50
30H M30 x 3.5 42M 4.2 052 52
30E M30 x 2 48M 4.8 055 55
30C M30 x 1.5 50M 5.0 056 56
30G M30 x 3 55M 5.5 057 57
33E M33 x 2 60M 6.0 058 58
33G M33 x 3 63M 6.3 060 60
35C M35 x 1.5 70M 7.0 062 62
36J M36 x 4 80M 8.0 063 63
36E M36 x 2 90M 9.0 065 65
36G M36 x 3 95M 9.5 068 68
39E M39 x 2 010 10 070 70
39G M39 x 3 011 11 072 72
40C M40 x 1.5 012 12 075 75
42K M42 x 4.5 013 13 078 78
27
ASME B18.24-2015
Table 3-4 Metric Size (Cont’d) Table 3-5 Miniature Screw Table 3-6 Inch Tapping Screw
PIN Size/Length (mm)
Thread Thread (Cont’d)
PIN Thread Size (mm) PIN Description
080 80
082 82 030 0.30 UNM 0.30 (0.0118 in.) 13R .138 Trim Head Size 4 Types AB, A,
035 0.35 UNM 0.35 (0.0138 in.) B, C Coarse
085 85
040 0.40 UNM 0.40 (0.0157 in.) 13S .138 Trim Head Size 5 Types AB, A,
088 88 B, C Coarse
090 90 045 0.45 UNM 0.45 (0.0177 in.)
13T .138 Trim Head Size 4 Type C Fine
092 92 050 0.50 UNM 0.50 (0.0197 in.)
13U .138 Trim Head Size 5 Type C Fine
095 95 055 0.55 UNM 0.55 (0.0217 in.)
151 .151-19 Types AB, ABR, B, BP, BF, BT
098 98 060 0.60 UNM 0.60 (0.0236 in.)
15A .151-16 Type A
100 100 070 0.70 UNM 0.70 (0.0276 in.)
102 102 080 0.80 UNM 0.80 (0.0315 in.)
16A .164-15 Type A
105 105 090 0.90 UNM 0.90 (0.0354 in.)
16F .164-36 Types D, F, G, T, C
108 108 100 1.00 UNM 1.00 (0.0394 in.)
16C .164-32 Types D, F, G, T, C, TRS
110 110 110 1.10 UNM 1.10 (0.0433 in.)
16R .164 Trim Head Size 5 Types AB, A,
115 115 120 1.20 UNM 1.20 (0.0472 in.) B, C Coarse
120 120 140 1.40 UNM 1.40 (0.0551 in.) 16S .164 Trim Head Size 6 Types AB, A,
B, C Coarse
125 125
130 130
135 135 Table 3-6 Inch Tapping Screw 16U .164 Trim Head Size 6 Type C Fine
Thread 190 .190-16 Types AB, ABR, B, BP, BF, BT
140 140
PIN Description 19A .190-12 Type A
145 145
060 .060-48 Types AB, ABR, B, BP, BF, BT 19F .190-32 Types D, F, G, T, C, TRS
150 150
19C .190-24 Types D, F, G, T, C, TRS
155 155 06A .060-40 Type A
073 .073-42 Types AB, ABR, B, BP, BF, BT 216 .216-14 Types AB, ABR, B, BP, BF, BT
160 160
07A .073-32 Type A 2IA .216-11 Type A
165 165
086 .086-32 Types AB, ABR, B, BP, BF, BT 21C .216-24 Type D, F, G, T, C, TRS
175 175
08A .086-32 Type A 21F .216-28 Type D, F, G, T, C
180 180
21R .216 Trim Head Size 8 Types AB, A,
185 185 08F .086-64 Types D, F, G, T, C
B, C Coarse
190 190 08C .086-56 Types D, F, G, T, C, TRS
21S .216 Trim Head Size 10 Types AB, A,
200 200 099 .099-28 Types AB, ABR, B, BP, BF, BT B, C Coarse
210 210 09A .099-28 Type A 21T .216 Trim Head Size 8 Type C Fine
220 220 09F .099-56 Types D, F, G, T, C 21U .216 Trim Head Size 10 Type C Fine
230 230 09C .099-48 Types D, F, G, T, C, TRS 24A .242-10 Type A
240 240 112 .112-24 Types AB, ABR, B, BP, BF, BT 24R .242 Trim Head Size 10
250 250 11A .112-24 Type A 24S .242 Trim Head Size 12
260 260 11F .112-48 Types D, F, G, T, C 250 .250-14 Types AB, ABR, B, BP, BF, BT
280 280 11C .112-40 Types D, F, G, T, C, TRS 25F .250-28 Types D, F, G, T, C
300 300 125 .125-20 Types AB, ABR, B, BP, BF, BT 25C .250-20 Types D, F, G, T, C, TRS
320 320 12A .125-20 Type A 25R .250 Trim Head Size 10 Types AB, A,
360 360 12F .125-44 Types D, F, G, T, C B, C Coarse
400 400 12C .125-40 Types D, F, G, T, C, TRS 25S .250 Trim Head Size 12 Types AB, A,
B, C Coarse
13A .138-18 Type A
25U .250 Trim Head Size 12 Type C Fine
13F .138-40 Types D, F, G, T, C
26A .268-10 Type A
13C .138-32 Types D, F, G, T, C, TRS
28
ASME B18.24-2015
Table 3-6 Inch Tapping Screw Table 3-7 Metric Tapping Table 3-10 Inch Spline Socket
Thread (Cont’d) Screw Thread (Cont’d) Set Screw Thread (Cont’d)
PIN Description PIN Description Description/No. of
PIN Size Splines (in.)
29A .294-9 Type A 952 9.5 x 2.1
312 .3125-12 Types AB, ABR, B, BP, BF, 95Y 9.5 x 2.1 (15 mm 09A 3 .099 4 Splines
BT width across flats) 09B 3 .099 6 Splines
31F .3125-24 Types D, F, G, T, C 10C 10 x 1.5 112 4 .112 6 Splines
31C .3125-18 Types D, F, G, T, C, TRS 10Z 10 x 1.5 (15 mm 12A 5 .125 4 Splines
31R .3125 Trim Head Size 12 Types AB, width across flats)
12B 5 .125 6 Splines
A, B, C Coarse
13A 4 .138 4 Splines
31S .3125 Trim Head Size 1\4 Types AB,
Table 3-8 Inch Hex Socket 13B 6 .138 6 Splines
A, B, C Coarse
Head Shoulder Screw Size 164 8 .164 6 Splines
PIN Shoulder Diameter (in.) 190 10 .190 6 Splines
31U .3125 Trim Head Size 1\4 Type C
1
Fine 250 ⁄4 .250 6 Splines
250 .250
5
32A .320-9 Type A 312 ⁄16 .3125 6 Splines
312 .312
3
375 .375-12 Types AB, ABR, B, BP, BF, BT 375 ⁄8 .375 6 Splines
375 .375
7
37A .372-9 Type A 438 ⁄16 .4375 6 Splines
500 .500
1
37F .375-24 Types D, F, G, T, C 500 ⁄2 .500 6 Splines
625 .625
5
37C .375-16 Types D, F, G, T, C, TRS 625 ⁄8 .625 6 Splines
750 .750
3
438 .4375-10 Types AB, ABR, B, BP, BF, 750 ⁄4 .750 6 Splines
A00 1.000
BT 875 7
⁄8 .875 6 Splines
A25 1.250
43F .4375-20 Types D, F, G, T, C
A50 1.500
43C .4375-14 Types D, F, G, T, C, TRS
A75 1.750 Table 3-11 Inch Trim Head
B00 2.000 Machine Screw Size
50F .500-20 Types D, F, G, T, C, TRS
PIN Description
50C .500-13 Types D, F, G, T, C
Table 3-9 Metric Hex Socket 112 .112-3 Head Size
Head Shoulder Screw Size 125 .125-4 Head Size
Table 3-7 Metric Tapping
Shoulder Diameter 13A .138-4 Head Size
Screw Thread
PIN (mm) 13B .138-5 Head Size
PIN Description
16A .164-5 Head Size
65M 6.5
204 2 x 0.4 16B .164-6 Head Size
80M 8
228 2.2 x 0.8 190 .190-8 Head Size
010 10
254 2.5 x 0.45 21A .216-8 Head Size
013 13
291 2.9 x 1.1 21B .216-10 Head Size
016 16
305 3 x 0.5 25A .250-10 Head Size
020 20
356 3.5 x 0.6 25B .250-12 Head Size
025 25
351 3.5 x 1.3 31A .3125-12 Head Size
407 4 x 0.7 31B .3125-4⁄1 Head Size
421 4.2 x 1.4 Table 3-10 Inch Spline Socket 375 .375-5⁄16 Head Size
481 4.8 x 1.6 Set Screw Thread
508 5 x 0.8 Description/No. of
PIN Size Splines (in.)
551 5.5 x 1.8
06A 6x1 060 0 .060 4 Splines
631 6.3 x 1.8 073 1 .073 4 Splines
08B 8 x 1.25 08A 2 .086 4 Splines
802 8 x 2.1 08B 2 .086 6 Splines
29
ASME B18.24-2015
Table 3-12 Inch Wood Screw Table 3-14 Inch Rivet Size Table 3-16 Inch Rivet Size 1
Thread Weight (Cont’d) (Cont’d)
PIN Size Diameter (in.)/Pitch PIN Size Designation PIN Diameter
060 0 .060-32 010 1 lb 089 0.089

1
073 1 .073-28 012 1 ⁄4 lb 099 0.099
086 2 .086-26 015 11⁄2 lb 123 0.123
3
099 3 .099-24 017 1 ⁄4 lb 125 0.125
112 4 .112-22 020 2 lb 146 0.146
1
125 5 .125-20 025 2 ⁄2 lb 152 0.152
138 6 .138-18 030 3 lb 15L 0.152*
151 7 .151-16 1 188 0.188
035 3 ⁄2 lb
164 8 .164-15 040 4 lb 190 0.190
177 9 .177-14 050 5 lb 217 0.217
190 10 .190-13 060 6 lb 252 0.252
216 12 .216-11 070 7 lb 310 0.310
242 14 .242-10 080 8 lb *Large Flat Countersunk Head
268 16 .268-9 090 9 lb
294 18 .294-8 100 10 lb Table 3-17 Inch Rivet
320 20 .320-8 120 11 lb Size/Length
372 24 .372-7 140 12 lb Length or O.D.
160 13 lb PIN (in.)
180 14 lb 092 0.092

Table 3-13 Inch Lag Screw
Thread 200 15 lb 078 0.078
3
375 ⁄8 in. 093 0.093
PIN Diameter (in.)/Pitch
109 0.109
190 .190-11
125 0.125
250 .250-10 Table 3-15 Inch Rivet Size
140 0.140
312 .3125-9 Number
156 0.156
375 .375-7 PIN Size Number
171 0.171
438 .4375-7
140 14 187 0.187
500 .500-6
130 13 203 0.203
625 .625-5
120 12 218 0.218
750 .750-4.5
110 10 234 0.234
875 .875-4
090 9 250 0.250
A00 1.000-3.5
080 8 265 0.265
A12 1.125-3.25
070 7 281 0.281
A25 1.250-3.25
060 6 296 0.296
1
055 5 ⁄2 312 0.312
Table 3-14 Inch Rivet Size 050 5 328 0.328
Weight 040 4 343 0.343
PIN Size Designation 359 0.359
06Z 6 oz 375 0.375
Table 3-16 Inch Rivet Size 1
08Z 8 oz 390 0.390
PIN Diameter
10Z 10 oz 406 0.406
12Z 12 oz 061 0.061 421 0.421
14Z 14 oz 062 0.062 437 0.437
30
ASME B18.24-2015
Table 3-17 Inch Rivet Table 3-18 Inch Pin Size 1 Table 3-20 Retaining Ring Size
Size/Length (Cont’d) (Cont’d) Number (Cont’d)
Length or O.D. PIN Size Diameter (in.) PIN Size Designation
PIN (in.)
120 6 .120 0Y6 Y6
453 0.453 136 7 .136 007 7
468 0.468 144 8 .144 008 8
484 0.484 161 10 .161 009 9
500 0.500 196 12 .196 0S9 S9
515 0.515 221 14 .221 010 10
531 0.531 250 16 .250 011 11
546 0.546
S11 S11
562 0.562
012 12
578 0.578 Table 3-19 Inch Pin Size 2
S12 S12
593 0.593 PIN Size Diameter (in.)
013 13
609 0.609 062 7/0 .062 014 14
625 0.625 078 6/0 .078 S14 S14
640 0.640 094 5/0 .094 Y14 Y14
656 0.656 109 4/0 .109 015 15
671 0.671 125 3/0 .125 S15 S15
687 0.687 141 2/0 .141 016 16
703 0.703 156 0 .156 017 17
718 0.718 172 1 .172 S17 S17
734 0.734 193 2 .193 018 18
750 0.750 219 3 .219 S18 S18
765 0.765 250 4 .250 Y18 Y18
781 0.781 289 5 .289 019 19
796 0.796 341 6 .341 020 20
812 0.812 409 7 .409 021 21
828 0.828 492 8 .492 S21 S21
843 0.843 591 9 .591
022 22
859 0.859 709 10 .706
023 23
875 0.875 860 11 .860
024 24
890 0.890 A03 12 1.032
025 25
906 0.906 A24 13 1.241
026 26
921 0.921 A52 14 1.523
027 27
937 0.937
028 28
953 0.953
Table 3-20 Retaining Ring Size 030 30
968 0.968 Number
031 31
984 0.984 PIN Size Designation Y31 Y31
A00 1.000
001 1 032 32
002 2 034 34
Table 3-18 Inch Pin Size 1
003 3 035 35
PIN Size Diameter (in.) 036 36
004 4
067 0 .067 005 5 037 37
086 2 .086 006 6 S37 S37
104 4 .104 0S6 S6 038 38
31
ASME B18.24-2015
Table 3-20 Retaining Ring Size Table 3-20 Retaining Ring Size Table 3-20 Retaining Ring Size
Number (Cont’d) Number (Cont’d) Number (Cont’d)
PIN Size Designation PIN Size Designation PIN Size Designation
039 39 S98 S98 218 218

040 40 100 100 220 220
042 42 102 102 225 225
043 43 105 105 230 230
S43 S43 106 106 231 231
045 45 108 108 237 237
046 46 110 110 240 240
047 47 112 112 243 243
048 48 115 115 244 244
050 50 118 118 250 250
051 51 SA1 S118 255 255
052 52 120 120 256 256
054 54 125 125 262 262
055 55 130 130 268 268
056 56 131 131 275 275
057 57 135 135 281 281
058 58 137 137 287 287
059 59 SA3 S137 293 293
060 60 140 140 295 295
062 62 143 143 300 300
063 63 145 145 306 306
065 65 150 150 312 312
066 66 155 155 315 315
068 68 156 156 325 325
070 70 160 160 334 334
072 72 162 162 343 343
S74 S74 165 165 347 347
075 75 168 168 350 350
077 77 170 170 354 354
078 78 175 175 362 362
080 80 177 177 368 368
081 81 180 180 375 375
082 82 181 181 387 387
084 84 185 185 393 393
085 85 187 187 400 400
086 86 190 190 412 412
087 87 193 193 425 425
088 88 196 196 433 433
090 90 200 200 437 437
092 92 206 206 450 450
093 93 210 210 462 462
095 95 212 212 475 475
098 98 215 215 500 500
32
ASME B18.24-2015
Table 3-20 Retaining Ring Size Table 3-21 Inch Retaining Ring Table 3-21 Inch Retaining Ring
Number (Cont’d) Size (Cont’d) Size (Cont’d)
PIN Size Designation PIN Diameter (in.) PIN Diameter (in.)
525 525 843 0.843 A87 1.875

537 537 866 0.866 A93 1.938
550 550 875 0.875 A96 1.969
575 575 901 0.901 B00 2.000
600 600 906 0.906 B04 2.047
625 625 937 0.937 B06 2.062
650 650 938 0.938 B12 2.125
662 662 968 0.968 B15 2.156
675 675 984 0.984 B16 2.165
700 700 987 0.987 B18 2.188
725 725 A00 1.000 B25 2.250
750 750 A02 1.023 B31 2.312
775 775 A03 1.031 B36 2.362
800 800 A06 1.062 B37 2.375
825 825 A09 1.093 B43 2.437
850 850 A12 1.125 B44 2.440
875 875 A15 1.156 B50 2.500
900 900 A18 1.188 B53 2.531
925 925 A21 1.218 B55 2.559
950 950 A25 1.250 B56 2.562
975 975 A28 1.281 B62 2.625
M00 1000 A31 1.312 B67 2.677
A34 1.343 B68 2.687
Table 3-21 Inch Retaining Ring A37 1.375 B68 2.688

Size A40 1.406 B75 2.750
PIN Diameter (in.) A43 1.437 B81 2.813

A43 1.438 B83 2.834
469 0.469
A43 1.439 B87 2.875
500 0.500
A45 1.456 B93 2.937
512 0.512
A46 1.468 B95 2.952
531 0.531
A50 1.500 C00 3.000
551 0.551
A56 1.562 C06 3.062
562 0.562
594 0.594 A57 1.574 C12 3.125
625 0.625 A57 1.575 C14 3.149
656 0.656 A62 1.625 C15 3.156
669 0.669 A65 1.653 C15 3.157
687 0.687 A67 1.687 C18 3.187
688 0.688 A68 1.688 C25 3.250
718 0.718 A75 1.750 C31 3.312

750 0.750 A77 1.771 C34 3.343
777 0.777 A81 1.812 C34 3.344
781 0.781 A81 1.813 C34 3.346
812 0.812 A85 1.850 C37 3.375
33
ASME B18.24-2015
Table 3-21 Inch Retaining Ring Table 3-21 Inch Retaining Ring Table 3-21 Inch Retaining Ring
Size (Cont’d) Size (Cont’d) Size (Cont’d)
PIN Diameter (in.) PIN Diameter (in.) PIN Diameter (in.)
C43 3.437 E75 5.750 K17 11.750

C46 3.469 E87 5.875 K20 12.000
C50 3.500 E90 5.905 K22 12.250
C54 3.543 F00 6.000 K25 12.500
C56 3.562 F12 6.125 K27 12.750
C62 3.625 F25 6.250 K30 13.000
C68 3.687 F29 6.299 K32 13.250
C74 3.740 F37 6.375 K35 13.500
C75 3.750 F50 6.500 K37 13.750
C81 3.812 F62 6.625 K40 14.000
C87 3.875 F69 6.692 K42 14.250
C93 3.938 F75 6.750 K45 14.500
D00 4.000 F87 6.875 K47 14.750
D06 4.063 GF0 7.000 K50 15.000
D12 4.125 G08 7.086
D13 4.134 G12 7.125
D18 4.188 G25 7.250
Table 3-22 Inch Washer Size 1
D25 4.250 G37 7.375 PIN Size Diameter (in.)
D31 4.312 G48 7.480 078 0.078

D33 4.330 G50 7.500 094 0.094
D33 4.331 G62 7.625 125 0.125
D37 4.375 G75 7.750 138 No. 6 0.138
D43 4.437 G87 7.875 164 No. 8 0.164
D50 4.500 H00 8.000 3
188 ⁄16 0.188
D52 4.527 H25 8.250 190 No. 10 0.190
D56 4.562 H26 8.267 216 No. 12 0.216
D62 4.625 H46 8.464 1
25N ⁄4 0.250 Narrow
D68 4.687 H50 8.500 1
25W ⁄4 0.250 Wide
D72 4.724 H75 8.750 5
31N ⁄16 0.312 Narrow
D75 4.750 H85 8.858 5
31W ⁄16 0.312 Wide
D81 4.812 J00 9.000 3
37N ⁄8 0.375 Narrow
D87 4.875 J05 9.055 3
37W ⁄8 0.375 Wide
D92 4.921 J25 9.250 7
43N ⁄16 0.438 Narrow
D93 4.937 J44 9.448 7
43W ⁄16 0.438 Wide
E00 5.000 J50 9.500 1
50N ⁄2 0.500 Narrow
E11 5.118 J75 9.750 1
50W ⁄2 0.500 Wide
E12 5.125 K00 10.000 9
56N ⁄16 0.562 Narrow
E25 5.250 K02 10.250 9
56W ⁄16 0.562 Wide
E37 5.375 K05 10.500 5
62N ⁄8 0.625 Narrow
E50 5.500 K07 10.750 5
62W ⁄8 0.625 Wide
3
E51 5.511 K10 11.000 75N ⁄4 0.750 Narrow
3
E62 5.625 K12 11.250 75W ⁄4 0.750 Wide
7
E70 5.708 K15 11.500 87N ⁄8 0.875 Narrow
34
ASME B18.24-2015
Table 3-22 Inch Washer Size 1 Table 3-23 Inch Washer Size 2 Table 3-24 Inch Washer Size 3
(Cont’d) (Cont’d) (Cont’d)
PIN Size Diameter (in.) PIN Diameter/Outside Diameter (in.) PIN Size Diameter and Type (in.)
7
87W ⁄8 0.875 Wide 62B 0.625/2.125 16W No. 8 0.164 Wide
A0N 1 1.000 Narrow 68A 0.688/1.469 19N No. 10 0.190 Narrow
A0W 1 1.000 Wide 68B 0.688/2.375 19R No. 10 0.190 Regular
1
A1N 1 ⁄8 1.125 Narrow 81A 0.812/1.750 19W No. 10 0.190 Wide
A1W 11⁄8 1.125 Wide 81B 0.812/2.875 21N No. 12 0.216 Narrow
1
A2N 1 ⁄4 1.250 Narrow 93A 0.938/2.000 21R No. 12 0.216 Regular
A2W 11⁄4 1.250 Wide 93B 0.938/3.375 21W No. 12 0.216 Wide
1 1
A3N 1 ⁄3 1.375 Narrow A0A 1.062/2.250 25N ⁄4 0.250 Narrow
A3W 11⁄3 1.375 Wide A0B 1.062/3.875 25R 1
⁄4 0.250 Regular
1 1
A5N 1 ⁄2 1.500 Narrow A25 1.250 25W ⁄4 0.250 Wide
A5W 11⁄2 1.500 Wide A37 1.375 31N 5
⁄16 0.312 Narrow
5
A62 - 1.625 A50 1.500 31R ⁄16 0.312 Regular
A75 13⁄4 1.750 A62 1.625 31W 5
⁄16 0.312 Wide
3 3
A87 1 ⁄4 1.875 A68 1.688 37N ⁄8 0.375 Narrow
3
B00 2 2.000 A81 1.812 37R ⁄8 0.375 Regular
B25 21⁄4 2.250 A93 1.938 37W 3
⁄8 0.375 Wide
1 7
B50 2 ⁄2 2.500 B06 2.062 43N ⁄16 0.438 Narrow
B75 23⁄4 2.750 43R 7
⁄16 0.438 Regular
7
C00 3 3.000 43W ⁄16 0.438 Wide
Table 3-24 Inch Washer Size 3 1
50N ⁄2 0.500 Narrow
PIN Size Diameter and Type (in.) 1
50R ⁄2 0.500 Regular
Table 3-23 Inch Washer Size 2 1
06N No. 0 0.060 Narrow 50W ⁄2 0.500 Wide
PIN Diameter/Outside Diameter (in.) 9
06R No. 0 0.060 Regular 56N ⁄16 0.562 Narrow
9
094 0.094 06W No. 0 0.060 Wide 56R ⁄16 0.562 Regular
9
125 0.125 07N No. 1 0.073 Narrow 56W ⁄16 0.562 Wide
5
156 0.156 07R No. 1 0.073 Regular 62N ⁄8 0.625 Narrow
5
5
188 0.188 08N No. 2 0.086 Narrow 62W ⁄8 0.625 Wide
3
3
3
234 0.234 09N No. 3 0.099 Narrow 75W ⁄4 0.750 Wide
7
7
7
312 0.312 11N No. 4 0.112 Narrow 87W ⁄8 0.875 Wide
37A 0.375/0.734 11R No. 4 0.112 Regular A0N 1 1.000 Narrow
37B 0.375/1.125 11W No. 4 0.112 Wide A0R 1 1.000 Regular
43A 0.438/0.875 12N No. 5 0.125 Narrow A0W 1 1.000 Wide
43B 0.438/1.375 12R No. 5 0.125 Regular A1N 11⁄8 1.125 Narrow
50A 0.500/1.125 12W No. 5 0.125 Wide A1R 11⁄8 1.125 Regular
50B 0.500/1.625 13R No. 6 0.138 Regular A1W 11⁄8 1.125 Wide
1
56A 0.562/1.25 13W No. 6 0.138 Wide A2N 1 ⁄4 1.250 Narrow
56B 0.562/1.875 16N No. 8 0.164 Narrow A2R 11⁄4 1.250 Regular
1
62A 0.625/1.375 16R No. 8 0.164 Regular A2W 1 ⁄4 1.250 Wide
35
ASME B18.24-2015
Table 3-24 Inch Washer Size 3 Table 3-25 Inch Washer Size 4 Table 3-26 Metric Washer
(Cont’d) (Cont’d) Size 1 (Cont’d)
PIN Size Diameter and Type (in.) PIN Size Outside Diameter (in.) PIN Diameter and Type (mm)
3
A3N 1 ⁄8 1.375 Narrow 19A .190 .610 01W 1.6 Wide
3
A3R 1 ⁄8 1.375 Regular 19B .190 .690 02N 2 Narrow
A3W 13⁄8 1.375 Wide 19C .190 .760 02R 2 Regular
1
A5N 1 ⁄2 1.500 Narrow 19D .190 .900 02W 2 Wide
A5R 11⁄2 1.500 Regular 21A .216 .690 2BN 2.5 Narrow
1
A5W 1 ⁄2 1.500 Wide 21B .216 .760 2BR 2.5 Regular
A6N 15⁄8 1.625 Narrow 21C .216 .900 2BW 2.5 Wide
5
A6R 1 ⁄8 1.625 Regular 21D .216 .985 03N 3 Narrow
A6W 15⁄8 1.625 Wide 25A .250 .760 03R 3 Regular
3
A7N 1 ⁄4 1.750 Narrow 25B .250 .900 03W 3 Wide
A7R 13⁄4 1.750 Regular 25C .250 .985 3CN 3.5 Narrow
3
A7W 1 ⁄4 1.750 Wide 25D .250 1.070 3CR 3.5 Regular
A8N 17⁄8 1.875 Narrow 31A .312 .900 3CW 3.5 Wide
7
A8R 1 ⁄8 1.875 Regular 31B .312 .985 04N 4 Narrow
A8W 17⁄8 1.875 Wide 31C .312 1.070 04R 4 Regular
B0N 2 2.000 Narrow 31D .312 1.155 04W 4 Wide
B0R 2 2.000 Regular 37A .375 .985 05N 5 Narrow
B0W 2 2.000 Wide 37B .375 1.070 05R 5 Regular
B2N 21⁄4 2.250 Narrow 37C .375 1.155 05W 5 Wide
B2R 21⁄4 2.250 Regular 37D .375 1.260 06N 6 Narrow
B2W 21⁄4 2.250 Wide 43A .438 1.070 06R 6 Regular
B5N 21⁄2 2.500 Narrow 43B .438 1.155 06W 6 Wide
B5R 21⁄2 2.500 Regular 43C .438 1.260 08N 8 Narrow
B5W 21⁄2 2.500 Wide 43D .438 1.315 08R 8 Regular
B7N 23⁄4 2.750 Narrow 50A .500 1.260 08W 8 Wide
B7R 23⁄4 2.750 Regular 50B .500 1.315 10N 10 Narrow
B7W 23⁄4 2.750 Wide 50C .500 1.410 10R 10 Regular
C0N 3 3.000 Narrow 50D .500 1.620 10W 10 Wide
C0R 3 3.000 Regular 56A .562 1.315 12N 12 Narrow
C0W 3 3.000 Wide 56B .562 1.430 12R 12 Regular
56C .562 1.620 12W 12 Wide
56D .562 1.830 14N 14 Narrow
Table 3-25 Inch Washer Size 4 62A .625 1.410 14R 14 Regular
PIN Size Outside Diameter (in.) 62B .625 1.620 14W 14 Wide
11A .112 .475 62C .625 1.830 16N 16 Narrow
11B .112 .510 62D .625 1.975 16R 16 Regular
11C .112 .610 16W 16 Wide
13A .138 .510 20N 20 Narrow
13B .138 .610
Table 3-26 Metric Washer 20R 20 Regular
Size 1
13C .138 .690 20W 20 Wide
PIN Diameter and Type (mm)
16A .164 .610 24N 24 Narrow
16B .164 .690 01N 1.6 Narrow 24R 24 Regular
16C .164 .760 01R 1.6 Regular 24W 24 Wide
36
ASME B18.24-2015
Table 3-26 Metric Washer Table 3-27 Metric Washer Table 3-28 Metric Key Size 1
Size 1 (Cont’d) Size 2 (Cont’d) PIN Key Size
PIN Diameter and Type (mm) Description 2
022 ⁄2
30N 30 Narrow Inside Outside 3
Diameter Diameter 033 ⁄3
30R 30 Regular PIN (mm) (mm) 044 4
⁄4
30W 30 Wide 055 5
⁄5
60D 6 27.20
36N 36 Narrow 066 6
⁄6
63A 6.3 19.30
36R 36 Regular 053 5
⁄3
63B 6.3 22.90
36W 36 Wide 064 6
⁄4
63C 6.3 25.00
8
63D 6.3 27.20 085 ⁄5
8
Table 3-27 Metric Washer 80A 8 22.90 087 ⁄7
10
Size 2 80B 8 25.00 10A ⁄6
10
Description 80C 8 27.20 10B ⁄8
12
Inside Outside 80D 8 29.35 12A ⁄6
12
Diameter Diameter 12B ⁄8
95A 9.5 25.00
PIN (mm) (mm) 14
95B 9.5 27.20 14A ⁄6
14
29A 2.9 12.10 14B ⁄9
95C 9.5 29.35
16
29B 2.9 13.00 95D 9.5 32.00 16A ⁄7
16
29C 2.9 15.50 A0A 10 25.00 16B ⁄10
18
30A 3 12.10 A0B 10 27.20 18A ⁄7
18
30B 3 13.00 A0C 10 29.35 18B ⁄11
20
30C 3 15.50 A0D 10 32.00 20A ⁄8
20
35A 3.5 12.90 A2A 12 32.00 20B ⁄12
22
35B 3.5 15.50 A2B 12 33.50 22A ⁄6
22
35C 3.5 17.55 A2C 12 36.00 22B ⁄14
25
40A 4 15.25 A2D 12 41.35 25A ⁄9
25
40B 4 17.70 A4A 14 33.50 25B ⁄14
28
40C 4 19.30 A4B 14 36.00 28A ⁄10
28
42A 4.2 15.25 A4C 14 41.35 28B ⁄16
32
42B 4.2 17.70 A4D 14 46.50 32A ⁄11
32
42C 4.2 19.30 A6A 16 36.00 32B ⁄18
36
48A 4.8 15.25 A6B 16 41.35 36A ⁄12
36
48B 4.8 17.75 A6C 16 46.50 36B ⁄20
40
48C 4.8 19.30 A6D 16 50.20 40A ⁄20
45
48D 4.8 22.90 45A ⁄25
50
50A 5 15.25 50A ⁄28
56
50B 5 17.75 56A ⁄32
63
50C 5 19.30 63A ⁄32
70
50D 5 22.90 70A ⁄36
80
55A 5.5 17.75 80A ⁄40
90
55B 5.5 19.30 90A ⁄45
100
55C 5.5 22.90 100 ⁄50
55D 5.5 25.00

60A 6 19.30
60B 6 22.90
60C 6 25.00
37
ASME B18.24-2015
Table 3-29 Metric Key Size 2 Table 4-1 Inch Length/Other Table 4-1 Inch Length/Other
PIN Key Size
(Cont’d) (Cont’d)
PIN Size Dia./Length (in.) PIN Size Dia./Length (in.)
101 1 x 1.4 x 4
7 3
152 1.5 x 2.6 x 7 219 ⁄32 .219 B75 2 ⁄4 2.750
7
202 2 x 2.6 x 7 234 .234 .234 B87 2 ⁄8 2.875
203 2 x 3.7 x 10 242 .242 .242 C00 3 3.000

1
253 2.5 x 3.7 x 10 250 ⁄4 .250 C12 31⁄8 3.125
305 3 x 5 x 13 266 .266 .266 C25 31⁄4 3.250

9 3
306 3 x 6.5 x 16 281 ⁄32 .281 C37 3 ⁄8 3.375
406 4 x 6.5 x 16 297 .297 .297 C50 31⁄2 3.500
5 5
407 4 x 7.5 x 19 312 ⁄16 .312 C62 3 ⁄8 3.625
506 5 x 6.5 x 16 315 .315 .315 C75 33⁄4 3.750
7
507 5 x 7.5 x 19 328 .328 .328 C87 3 ⁄8 3.875
11
509 5 x 9 x 22 344 ⁄32 .344 D00 4 4.000
23
609 6 x 9 x 22 359 ⁄64 .359 D12 41⁄8 4.125
3
60K 6 x 10 x 25 375 ⁄8 .375 D25 41⁄4 4.250
3
80L 8 x 11 x 28 378 .378 .378 D37 4 ⁄8 4.375
1
K0P 10 x 13 x 32 390 .390 .390 D50 4 ⁄2 4.500
13
406 ⁄32 .406 D62 45⁄8 4.625
3
422 .422 .422 D75 4 ⁄4 4.750
Table 4-1 Inch Length/Other 7
438 ⁄16 .438 D87 47⁄8 4.875
PIN Size Dia./Length (in.) 453 .453 .453 E00 5 5.000
000 n/a No Entry 469 .469 .469 E12 51⁄8 5.125
1 1
031 ⁄32 .031 484 .484 .484 E25 5 ⁄4 5.250
1
039 .039 .039 500 ⁄2 .500 E37 53⁄8 5.375
3 9 1
047 ⁄64 .047 562 ⁄16 .562 E50 5 ⁄2 5.500
5
052 .052 .052 625 ⁄8 .625 E62 55⁄8 5.625
1 11 3
062 ⁄16 .062 688 ⁄16 .688 E75 5 ⁄4 5.750
3
075 .075 .075 750 ⁄4 .750 E87 57⁄8 5.875
5 13
078 ⁄64 .078 812 ⁄16 .812 F00 6 6.000
7
093 3
⁄32 .093 875 ⁄8 .875 F12 61⁄8 6.125
15 1
094 .094 .094 938 ⁄16 .938 F25 6 ⁄4 6.250
010 .100 .100 A00 1 1.000 F37 63⁄8 6.375
7 1 1
109 ⁄64 .109 A12 1 ⁄8 1.125 F50 6 ⁄2 6.500
116 .116 .116 A25 11⁄4 1.250 F62 65⁄8 6.625
1 3 3
125 ⁄8 .125 A37 1 ⁄8 1.375 F75 6 ⁄4 6.750
140 .140 .140 A50 11⁄2 1.500 F87 67⁄8 6.875
9 5
141 ⁄64 .141 A62 1 ⁄8 1.625 G00 7 7.000
154 .154 .154 A75 13⁄4 1.750 G12 71⁄8 7.125
5 7 1
156 ⁄32 .156 A87 1 ⁄8 1.875 G25 7 ⁄4 7.250
167 .167 .167 B00 2 2.000 G37 73⁄8 7.375
1 1
172 .172 .172 B12 2 ⁄8 2.125 G50 7 ⁄2 7.500
182 .182 .182 B25 21⁄4 2.250 G62 75⁄8 7.625
3 3 3
188 ⁄16 .188 B37 2 ⁄8 2.375 G75 7 ⁄4 7.750
203 .203 .203 B50 21⁄2 2.500 G87 77⁄8 7.875
5
212 .212 .212 B62 2 ⁄8 2.625 H00 8 8.000
38
ASME B18.24-2015
Table 4-1 Inch Length/Other Table 4-1 Inch Length/Other Table 4-1 Inch Length/Other
PIN Size Dia./Length (in.) PIN Size Dia./Length (in.) PIN Size Dia./Length (in.)
1 5 1
H25 8 ⁄4 8.250 10R ⁄8 .625 RBD H2R 8 ⁄4 8.250 RBD
1 11 1
H50 8 ⁄2 8.500 11R ⁄16 .688 RBD H5R 8 ⁄2 8.500 RBD
H75 83⁄4 8.750 12R 3
⁄4 .750 RBD H7R 83⁄4 8.750 RBD
13
J00 9 9.000 13R ⁄16 .812 RBD J0R 9 9.000 RBD
J25 91⁄4 9.250 14R 7
⁄8 .875 RBD J2R 91⁄4 9.250 RBD
1 15 1
J50 9 ⁄2 9.500 15R ⁄16 .938 RBD J5R 9 ⁄2 9.500 RBD
J75 93⁄4 9.750 16R 1 1.000 RBD J7R 93⁄4 9.750 RBD
1 K0R 10 10.00 RBD
K00 10 10.000 18R 1 ⁄8 1.125 RBD
K02 101⁄4 10.250 20R 11⁄4 1.250 RBD K2R 10 1⁄4 10.25 RBD
1 3 1
K05 10 ⁄2 10.500 22R 1 ⁄8 1.375 RBD K5R 10 ⁄2 10.50 RBD
K07 103⁄4 10.750 24R 11⁄2 1.500 RBD K7R 10 3⁄4 10.75 RBD
5 L0R 11 11.00 RBD
K10 11 11.000 26R 1 ⁄8 1.625 RBD
K12 111⁄4 11.250 28R 13⁄4 1.750 RBD L2R 11 1⁄4 11.25 RBD
1 7 1
K15 11 ⁄2 11.500 30R 1 ⁄8 1.875 RBD L5R 11 ⁄2 11.50 RBD
K17 11 ⁄4 3
11.750 32R 2 2.000 RBD L7R 11 3⁄4 11.75 RBD
1 M0R 12 12.00 RBD
K20 12 12.000 34R 2 ⁄8 2.125 RBD
K22 12.250 12.250 36R 2 ⁄41
2.250 RBD M5R 12 1⁄2 12.50 RBD
K25 12 ⁄2 1
12.500 38R 2 ⁄83
2.375 RBD N0R 13 13.00 RBD
K27 12.750 12.750 40R 2 ⁄21
2.500 RBD N5R 13 1⁄2 13.50 RBD
K30 13 13.000 42R 2 ⁄85
2.625 RBD P0R 14 14.00 RBD
K35 13 ⁄2 1
13.500 44R 2 ⁄83
2.750 RBD P5R 14 1⁄2 14.50 RBD
K40 14 14.000 46R 2 ⁄87

2.875 RBD Q0R 15 15.00 RBD
K45 14 ⁄2 1
14.500 48R 3 3.000 RBD Q5R 15 1⁄2 15.50 RBD
K50 15 15.000 52R 3 ⁄41

3.250 RBD S0R 16 16.00 RBD
K55 15 ⁄2 1
15.500 56R 3 ⁄21
3.500 RBD S5R 16 1⁄2 16.50 RBD
K60 16 16.000 60R 3 ⁄43

3.750 RBD T0R 17 17.00 RBD
K65 16 ⁄2 1
16.500 64R 4 4.000 RBD T5R 17 1⁄2 17.50 RBD
K70 17 17.000 68R 4 ⁄41

4.250 RBD U0R 18 18.00 RBD
K75 17 ⁄2 1
17.500 72R 4 ⁄21
4.500 RBD U5R 18 1⁄2 18.50 RBD
K80 18 18.000 76R 4 ⁄43

4.750 RBD V0R 19 19.00 RBD
K85 18 ⁄2 1
18.500 80R 5 5.000 RBD V5R 19 1⁄2 19.50 RBD
K90 19 19.000 84R 5 ⁄41

5.250 RBD W0R 20 20.00 RBD
1 1
K95 19 ⁄2 19.500 88R 5 ⁄2 5.500 RBD GENERAL NOTE: RBD p Reduced Body
L00 20 20.000 92R 53⁄4 5.750 RBD Diameter.
1
01R ⁄16 .062 RBD 96R 6 6.000 RBD
1
02R ⁄8 .125 RBD F2R 61⁄4 6.250 RBD
3 1
03R ⁄16 .188 RBD F5R 6 ⁄2 6.500 RBD
1
04R ⁄4 .250 RBD F7R 63⁄4 6.750 RBD
5
05R ⁄16 .312 RBD G0R 7 7.000 RBD
3
06R ⁄8 .375 RBD G2R 71⁄4 7.250 RBD
7 1
07R ⁄16 .438 RBD G5R 7 ⁄2 7.500 RBD
1
08R ⁄2 .500 RBD G7R 73⁄4 7.750 RBD
9
09R ⁄16 .562 RBD H0R 8 8.000 RBD
39
ASME B18.24-2015
Table 4-2 Metric Length/Other Table 4-2 Metric Length/Other Table 4-2 Metric Length/Other
PIN Size/Length (mm)
(Cont’d) (Cont’d)
PIN Size/Length (mm) PIN Size/Length (mm)
000 No Entry
06M 0.6 028 28 115 115
08M 0.8 030 30 120 120
10M 1.0 032 32 125 125
12M 1.2 033 33 130 130
14M 1.4 034 34 135 135
15M 1.5 035 35 140 140
16M 1.6 036 36 145 145

20M 2.0 037 37 150 150
22M 2.2 038 38 155 155
25M 2.5 040 40 160 160
29M 2.9 042 42 165 165
30M 3.0 045 45 170 170
32M 3.2 046 46 175 175
35M 3.5 047 47 180 180
40M 4.0 048 48 185 185
42M 4.2 050 50 190 190
48M 4.8 052 52 200 200
50M 5.0 055 55 210 210
55M 5.5 056 56 220 220
60M 6.0 057 57 230 230
63M 6.3 058 58 240 240
70M 7.0 060 60 250 250
80M 8.0 062 62 260 260
90M 9.0 063 63 270 270
95M 9.5 065 65 280 280
010 10 068 68 290 290
011 11 070 70 300 300
012 12 072 72 320 320
013 13 075 75 340 340
014 14 078 78 360 360
015 15 080 80 380 380
016 16 082 82 400 400
017 17 085 85 420 420
018 18 088 88 440 440
019 19 090 90 460 460
020 20 092 92 480 480
021 21 095 95 500 500
022 22 098 98 520 520
023 23 100 100 540 540
024 24 102 102 560 560
025 25 105 105 580 580
026 26 108 108 600 600
027 27 110 110 620 620
40
ASME B18.24-2015
Table 4-2 Metric Length/Other Table 4-2 Metric Length/Other Table 4-2 Metric Length/Other
PIN Size/Length (mm) PIN Size/Length (mm) PIN Size/Length (mm)
640 640 50R 50 RBD F8R 680 RBD

660 660 55R 55 RBD G0R 700 RBD
680 680 60R 60 RBD G2R 720 RBD
700 700 65R 65 RBD G4R 740 RBD
720 720 70R 70 RBD G6R 760 RBD
740 740 75R 75 RBD G8R 780 RBD
760 760 80R 80 RBD H0R 800 RBD
780 780 85R 85 RBD H2R 820 RBD
800 800 90R 90 RBD H4R 840 RBD
820 820 A0R 100 RBD H6R 860 RBD
840 840 A1R 110 RBD H8R 880 RBD
860 860 A2R 120 RBD J0R 900 RBD
880 880 A3R 130 RBD J2R 920 RBD
900 900 A4R 140 RBD J4R 940 RBD
920 920 A5R 150 RBD J6R 960 RBD
940 940 A6R 160 RBD J8R 980 RBD
960 960 A7R 170 RBD K0R 1000 RBD
980 980 A8R 180 RBD
GENERAL NOTE: RBD p Reduced Body
K00 1000 A9R 190 RBD Diameter.
0CR 2.5 RBD B0R 200 RBD
03R 3.0 RBD B2R 220 RBD Table 4-3 Inch Miniature Screw
0DR 3.5 RBD B4R 240 RBD
Length
04R 4.0 RBD B6R 260 RBD PIN Length (in.)
05R 5.0 RBD B8R 280 RBD 020 .020

06R 6.0 RBD C0R 300 RBD 025 .025
07R 7.0 RBD C2R 320 RBD 032 .032
08R 8.0 RBD C4R 340 RBD 040 .040
09R 9.0 RBD C6R 360 RBD 050 .050
10R 10 RBD C8R 380 RBD 060 .060
12R 12 RBD D0R 400 RBD 080 .080
13R 13 RBD D2R 420 RBD 100 .100
14R 14 RBD D4R 440 RBD 120 .120
16R 16 RBD D6R 460 RBD 160 .160
17R 17 RBD D8R 480 RBD 200 .200
18R 18 RBD E0R 500 RBD 250 .250
19R 19 RBD E2R 520 RBD 320 .320
20R 20 RBD E4R 540 RBD 400 .400
22R 22 RBD E6R 560 RBD 500 .500
25R 25 RBD E8R 580 RBD 600 .600
30R 30 RBD F0R 600 RBD
41
ASME B18.24-2015
Table 4-4 Insert Length Table 4-6 Inch Eyebolt Full Table 4-6 Inch Eyebolt Full
PIN Length
Thread Length Thread Length (Cont’d)
PIN Length (in.) PIN Length (in.)
10X 1.0 x Nom. Dia.
15X 1.5 x Nom. Dia. 750 0.75 D25 4.25
20X 2.0 x Nom. Dia. 810 0.81 D56 4.56
25X 2.5 x Nom. Dia. 840 0.84 D69 4.69
30X 3.0 x Nom. Dia. 880 0.88 D94 4.94

940 0.94 E06 5.06
A00 1.00 E31 5.31
Table 4-5 Inch Pin Length E50 5.50
A12 1.12
PIN Length (in.) E69 5.69
A13 1.13
250 0.250 A25 1.25 E75 5.75
312 0.312 A31 1.31 E94 5.94
375 0.375 A38 1.38 F19 6.19
580 0.58 A50 1.50 F31 6.31
770 0.77 A62 1.62 F44 6.44
940 0.94 A69 1.69 F69 6.69
A00 1.000 A81 1.81 F88 6.88
A06 1.06 A88 1.88 G06 7.06
A12 1.125 B22 2.22 G31 7.31
A19 1.19 B25 2.25 G69 7.69
A36 1.36 B31 2.31 G75 7.75
A61 1.61 B38 2.38 H44 8.44
A91 1.91 B44 2.44 H56 8.56
B16 2.16 B50 2.50 H94 8.94
B24 2.41 B53 2.53 J22 9.22
J50 9.50 B62 2.62 J50 9.50
J75 9.75 B66 2.66 J72 9.72
K00 10.00 B75 2.75 K01 10.12
B81 2.81 K05 10.50
B97 2.97 K12 11.20
C00 3.00 K14 11.44
C06 3.06 K15 11.53
C09 3.09 K22 12.22
C19 3.19 K31 13.19
C38 3.38 K40 14.06
C41 3.41
C44 3.44
C47 3.47
C50 3.50
C75 3.75
C78 3.78
C81 3.81
C88 3.88
D12 4.12
D19 4.19
42
ASME B18.24-2015
Table 5-1 Material and Treatment: ASTM Material Specifications

GENERAL NOTE: Italic text denotes information that remains the same as in the previous version of the Standard, but has been moved within
this document for consolidation or clarity.
NOTE:
(1) This designation is cancelled and is not to be used for new design.
ASTM A31 – Boiler Rivet Steel
PIN Material Spec Material UNS #
EP6 ASTM A31, Grade A Carbon Steel —
EP7 ASTM A31, Grade B Carbon Steel —
ASTM A183 – Carbon Steel Track Bolts and Nuts
AA1 ASTM A183, Grade 1 Alloy Steel —
AA2 ASTM A183, Grade 2 Alloy Steel —
ASTM A193/A193M – Alloy Steel and Stainless Steel Bolting Materials for High-Temperature Service
AA3 ASTM A193/A193M, Grade B5 Stainless Steel S50100
AA4 ASTM A193/A193M, Grade B6 Stainless Steel S41000
AA5 ASTM A193/A193M, Grade B6X Stainless Steel S41000
AA6 ASTM A193/A193M, Grade B7 Alloy Steel G41400
AA7 ASTM A193/A193M, Grade B7M Alloy Steel G41400
AA8 ASTM A193/A193M, Grade B16 Alloy Steel K14072
AA9 ASTM A193/A193M, Grade B8, Class 1 Stainless Steel S30400
AB0 ASTM A193/A193M, Grade B8C, Class 1 Stainless Steel S34700
AB1 ASTM A193/A193M, Grade B8M, Class 1 Stainless Steel S31600
AB2 ASTM A193/A193M, Grade B8P, Class 1 Stainless Steel S30500
AB3 ASTM A193/A193M, Grade B8T, Class 1 Stainless Steel S32100
AB4 ASTM A193/A193M, Grade B8LN, Class 1 Stainless Steel S30453
AB5 ASTM A193/A193M, Grade B8MLN, Class 1 Stainless Steel S31653
AB6 ASTM A193/A193M, Grade B8A, Class 1A Stainless Steel S30400
AB7 ASTM A193/A193M, Grade B8CA, Class 1A Stainless Steel S34700
AB8 ASTM A193/A193M, Grade B8MA, Class 1A Stainless Steel S31600
AB9 ASTM A193/A193M, Grade B8PA, Class 1A Stainless Steel S30500
AC0 ASTM A193/A193M, Grade B8TA, Class 1A Stainless Steel S32100
AC1 ASTM A193/A193M, Grade B8LNA, Class 1A Stainless Steel S30453
AC2 ASTM A193/A193M, Grade B8MLNA, Class 1A Stainless Steel S31653
AC3 ASTM A193/A193M, Grade B8NA, Class 1A Stainless Steel S30451
AC4 ASTM A193/A193M, Grade B8MNA, Class 1A Stainless Steel S31651
AC5 ASTM A193/A193M, Grade B8MLCuNA, Class 1A Stainless Steel S31254
43
ASME B18.24-2015
Table 5-1 Material and Treatment: ASTM Material Specifications (Cont’d)

NOTE:
ASTM A193/A193M – Alloy Steel and Stainless Steel Bolting Materials for High-Temperature Service (Cont’d)
AC6 ASTM A193/A193M, Grade B8N, Class 1B Stainless Steel S30451
AC7 ASTM A193/A193M, Grade B8MN, Class 1B Stainless Steel S31651
AC8 ASTM A193/A193M, Grade B8MLCuN, Class 1B Stainless Steel S31254
AC9 ASTM A193/A193M, Grade B8R, Class 1C Stainless Steel S20910
AD0 ASTM A193/A193M, Grade B8RA, Class 1C Stainless Steel S20910
AD1 ASTM A193/A193M, Grade B8S, Class 1C Stainless Steel S21800
AD2 ASTM A193/A193M, Grade B8SA, Class 1C Stainless Steel S21800
AD3 ASTM A193/A193M, Grade B8, Class 1D Stainless Steel S30400
AD4 ASTM A193/A193M, Grade B8M, Class 1D Stainless Steel S31600
AD5 ASTM A193/A193M, Grade B8P, Class 1D Stainless Steel S30500
AD6 ASTM A193/A193M, Grade B8LN, Class 1D Stainless Steel S30453
AD7 ASTM A193/A193M, Grade B8MLN, Class 1D Stainless Steel S31653
AD8 ASTM A193/A193M, Grade B8N, Class 1D Stainless Steel S30451
AD9 ASTM A193/A193M, Grade B8MN, Class 1D Stainless Steel S31651
AE0 ASTM A193/A193M, Grade B8R, Class 1D Stainless Steel S20910
AE1 ASTM A193/A193M, Grade B8S, Class 1D Stainless Steel S21800
AE2 ASTM A193/A193M, Grade B8, Class 2 Stainless Steel S30400
AE3 ASTM A193/A193M, Grade B8C, Class 2 Stainless Steel S34700
AE4 ASTM A193/A193M, Grade B8P, Class 2 Stainless Steel S30500
AE5 ASTM A193/A193M, Grade B8T, Class 2 Stainless Steel S32100
AE6 ASTM A193/A193M, Grade B8N, Class 2 Stainless Steel S30451
AE7 ASTM A193/A193M, Grade B8M, Class 2 Stainless Steel S31600
AE8 ASTM A193/A193M Grade B8MN, Class 2 Stainless Steel S31651
AE9 ASTM A193/A193M, Grade B8MLCuN, Class 2 Stainless Steel S31254
AF0 ASTM A193/A193M, Grade B8M2, Class 2B Stainless Steel S31600
AF1 ASTM A193/A193M, Grade B8, Class 2B Stainless Steel S30400
AF2 ASTM A193/A193M, Grade B8M3, Class 2C Stainless Steel S31600
ASTM A194/A194M – Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service
AF3 ASTM A194/A194M, Grade 1 Carbon Steel K01503
AF4 ASTM A194/A194M, Grade 1, Scale Free Bright Finish Required Carbon Steel K01503
44
ASME B18.24-2015

NOTE:
ASTM A194/A194M – Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service (Cont’d)
AF5 ASTM A194/A194M, Grade 2 Carbon Steel K04002
AF6 ASTM A194/A194M, Grade 2, Scale Free Bright Finish Required Carbon Steel K04002
AF7 ASTM A194/A194M, Grade 2H Carbon Steel K04002
AF8 ASTM A194/A194M Grade 2H, Scale Free Bright Finish Required Carbon Steel K04002
AF9 ASTM A194/A194M, Grade 2HM Carbon Steel K04002
AG0 ASTM A194/A194M, Grade 2HM, Scale Free Bright Finish Required Carbon Steel K04002
AG1 ASTM A194/A194M, Grade 3 Stainless Steel S50100
AG2 ASTM A194/A194M, Grade 3, Scale Free Bright Finish Required Stainless Steel S50100
AG3 ASTM A194/A194M, Grade 4 Alloy Steel K14510
AG4 ASTM A194/A194M, Grade 4, Scale Free Bright Finish Required Alloy Steel K14510
AG5 ASTM A194/A194M, Grade 4L Alloy Steel K14510
AG6 ASTM A194/A194M, Grade 4L, Scale Free Bright Finish Required Alloy Steel K14510
AG7 ASTM A194/A194M, Grade 6 Stainless Steel S41000
AG8 ASTM A194/A194M, Grade 6, Scale Free Bright Finish Required Stainless Steel S41000
AG9 ASTM A194/A194M, Grade 6F Stainless Steel S41600
AH0 ASTM A194/A194M, Grade 6F, Scale Free Bright Finish Required Stainless Steel S41600
AH1 ASTM A194/A194M, Grade 7 Alloy Steel G41400
AH2 ASTM A194/A194M, Grade 7, Scale Free Bright Finish Required Alloy Steel G41400
AH3 ASTM A194/A194M, Grade 7L Alloy Steel G41400
AH4 ASTM A194/A194M, Grade 7L, Scale Free Bright Finish Required Alloy Steel G41400
AH5 ASTM A194/A194M, Grade 7M Alloy Steel G41400
AH6 ASTM A194/A194M, Grade 7M, Scale Free Bright Finish Required Alloy Steel G41400
AH7 ASTM A194/A194M, Grade 16 Stainless Steel K14072
AH8 ASTM A194/A194M, Grade 16, Scale Free Bright Finish Required Stainless Steel K14072
AH9 ASTM A194/A194M, Grade 8 Stainless Steel S30400
AJ0 ASTM A194/A194M, Grade 8, Scale Free Bright Finish Required Stainless Steel S30400
AJ1 ASTM A194/A194M, Grade 8C Stainless Steel S34700
AJ2 ASTM A194/A194M, Grade 8C, Scale Free Bright Finish Required Stainless Steel S34700
AJ3 ASTM A194/A194M, Grade 8M Stainless Steel S31600
AJ4 ASTM A194/A194M, Grade 8M, Scale Free Bright Finish Required Stainless Steel S31600
AJ5 ASTM A194/A194M, Grade 8T Stainless Steel S32100
45
ASME B18.24-2015

NOTE:
AJ6 ASTM A194/A194M, Grade 8T, Scale Free Bright Finish Required Stainless Steel S32100
AJ7 ASTM A194/A194M, Grade 8F Stainless Steel S30323
AJ8 ASTM A194/A194M, Grade 8F, Scale Free Bright Finish Required Stainless Steel S30323
AJ9 ASTM A194/A194M, Grade 8P Stainless Steel S30500
AK0 ASTM A194/A194M, Grade 8P, Scale Free Bright Finish Required Stainless Steel S30500
AK1 ASTM A194/A194M, Grade 8N Stainless Steel S30451
AK2 ASTM A194/A194M, Grade 8N, Scale Free Bright Finish Required Stainless Steel S30451
AK3 ASTM A194/A194M, Grade 8MN Stainless Steel S31651
AK4 ASTM A194/A194M, Grade 8MN, Scale Free Bright Finish Required Stainless Steel S31651
AK5 ASTM A194/A194M, Grade 8R Stainless Steel S20910
AK6 ASTM A194/A194M, Grade 8R, Scale Free Bright Finish Required Stainless Steel S20910
AK7 ASTM A194/A194M Grade 8S Stainless Steel S21800
AK8 ASTM A194/A194M, Grade 8S, Scale Free Bright Finish Required Stainless Steel S21800
AK9 ASTM A194/A194M, Grade 8LN Stainless Steel S30453
AL0 ASTM A194/A194M, Grade 8LN, Scale Free Bright Finish Required Stainless Steel S30453
AL1 ASTM A194/A194M, Grade 8MLN Stainless Steel S31653
AL2 ASTM A194/A194M, Grade 8MLN, Scale Free Bright Finish Required Stainless Steel S31653
AL3 ASTM A194/A194M, Grade 8MLCuN Stainless Steel S31653
AL4 ASTM A194/A194M, Grade 8MLCuN, Scale Free Bright Finish Required Stainless Steel S31653
AL5 ASTM A194/A194M, Grade 9C Stainless Steel N08367
AL6 ASTM A194/A194M, Grade 9C, Scale Free Bright Finish Required Stainless Steel N08367
AL7 ASTM A194/A194M, Grade 8A Stainless Steel S30400
AL8 ASTM A194/A194M, Grade 8A, Scale Free Bright Finish Required Stainless Steel S30400
AL9 ASTM A194/A194M, Grade 8CA Stainless Steel S34700
AM0 ASTM A194/A194M, Grade 8CA, Scale Free Bright Finish Required Stainless Steel S34700
AM1 ASTM A194/A194M, Grade 8MA Stainless Steel S31600
AM2 ASTM A194/A194M, Grade 8MA, Scale Free Bright Finish Required Stainless Steel S31600
AM3 ASTM A194/A194M, Grade 8TA Stainless Steel S32100
AM4 ASTM A194/A194M, Grade 8TA, Scale Free Bright Finish Required Stainless Steel S32100
AM5 ASTM A194/A194M, Grade 8FA Stainless Steel S30323
AM6 ASTM A194/A194M, Grade 8FA, Scale Free Bright Finish Required Stainless Steel S30323
46
ASME B18.24-2015

NOTE:
AM7 ASTM A194/A194M, Grade 8PA Stainless Steel S30500
AM8 ASTM A194/A194M, Grade 8PA, Scale Free Bright Finish Required Stainless Steel S30500
AM9 ASTM A194/A194M, Grade 8NA Stainless Steel S30451
AN0 ASTM A194/A194M, Grade 8NA, Scale Free Bright Finish Required Stainless Steel S30451
AN1 ASTM A194/A194M, Grade 8MNA Stainless Steel S31651
AN2 ASTM A194/A194M, Grade 8MNA, Scale Free Bright Finish Required Stainless Steel S31651
AN3 ASTM A194/A194M Grade 8RA Stainless Steel S20910
AN4 ASTM A194/A194M, Grade 8RA, Scale Free Bright Finish Required Stainless Steel S20910
AN5 ASTM A194/A194M, Grade 8SA Stainless Steel S21800
AN6 ASTM A194/A194M, Grade 8SA, Scale Free Bright Finish Required Stainless Steel S21800
AN7 ASTM A194/A194M, Grade 8LNA Stainless Steel S30453
AN8 ASTM A194/A194M, Grade 8LNA, Scale Free Bright Finish Required Stainless Steel S30453
AN9 ASTM A194/A194M, Grade 8MLNA Stainless Steel S31653
AP0 ASTM A194/A194M, Grade 8MLNA, Scale Free Bright Finish Required Stainless Steel S31653
AP1 ASTM A194/A194M, Grade 8MLCuNA Stainless Steel S31653
AP2 ASTM A194/A194M, Grade 8MLCuNA, Scale Free Bright Finish Required Stainless Steel S31653
AP3 ASTM A194/A194M, Grade 9CA Stainless Steel N08367
AP4 ASTM A194/A194M, Grade 9CA, Scale Free Bright Finish Required Stainless Steel N08368
ASTM A307 – Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
AP5 ASTM A307, Grade A Carbon Steel —
AP6 ASTM A307, Grade B Carbon Steel —
AP7 ASTM A307, Grade C Carbon Steel —
ASTM A320/A320M – Alloy-Steel Bolting Materials for Low-Temperature Service
AP8 ASTM A320/A320M, Grade L7 Alloy Steel G41400
AP9 ASTM A320/A320M, Grade L7, Scale Free Bright Finish Required Alloy Steel G41400
AQ0 ASTM A320/A320M, Grade L7A Alloy Steel G40370
AQ1 ASTM A320/A320M, Grade L7A, Scale Free Bright Finish Required Alloy Steel G40370
AQ2 ASTM A320/A320M, Grade L7B Alloy Steel G41370
AQ3 ASTM A320/A320M, Grade L7B, Scale Free Bright Finish Required Alloy Steel G41370
47
ASME B18.24-2015

NOTE:
ASTM A320/A320M – Alloy-Steel Bolting Materials for Low-Temperature Service (Cont’d)
AQ4 ASTM A320/A320M, Grade L7C Alloy Steel G87400
AQ5 ASTM A320/A320M, Grade L7C, Scale Free Bright Finish Required Alloy Steel G87400
AQ6 ASTM A320/A320M, Grade L70 Alloy Steel —
AQ7 ASTM A320/A320M, Grade L70, Scale Free Bright Finish Required Alloy Steel —
AQ8 ASTM A320/A320M, Grade L71 Alloy Steel G40370
AQ9 ASTM A320/A320M, Grade L71, Scale Free Bright Finish Required Alloy Steel G40370
AR0 ASTM A320/A320M, Grade L72 Alloy Steel —
AR1 ASTM A320/A320M, Grade L72, Scale Free Bright Finish Required Alloy Steel —
AR4 ASTM A320/A320M, Grade L43 Alloy Steel G43400
AR5 ASTM A320/A320M, Grade L43, Scale Free Bright Finish Required Alloy Steel G43400
AR6 ASTM A320/A320M, Grade L7M Alloy Steel G41400
AR7 ASTM A320/A320M, Grade L7M, Scale Free Bright Finish Required Alloy Steel G41400
AS0 ASTM A320/A320M, Grade B8, Class 1 Stainless Steel S30400
AS1 ASTM A320/A320M, Grade B8, Class 1, Scale Free Bright Finish Required Stainless Steel S30400
AS2 ASTM A320/A320M, Grade B8C, Class 1 Stainless Steel S34700
AS3 ASTM A320/A320M, Grade B8C, Class 1, Scale Free Bright Finish Required Stainless Steel S34700
AS4 ASTM A320/A320M, Grade B8M, Class 1 Stainless Steel S31600
AS5 ASTM A320/A320M, Grade B8M, Class 1, Scale Free Bright Finish Required Stainless Steel S31600
AS6 ASTM A320/A320M, Grade B8P, Class 1 Stainless Steel S30500
AS7 ASTM A320/A320M, Grade B8P, Class 1, Scale Free Bright Finish Required Stainless Steel S30500
AS8 ASTM A320/A320M, Grade B8F, Class 1 Stainless Steel S30323
AS9 ASTM A320/A320M, Grade B8F, Class 1, Scale Free Bright Finish Required Stainless Steel S30323
AT0 ASTM A320/A320M, Grade B8T, Class 1 Stainless Steel S32100
AT1 ASTM A320/A320M, Grade B8T, Class 1, Scale Free Bright Finish Required Stainless Steel S32100
AT2 ASTM A320/A320M, Grade B8LN, Class 1 Stainless Steel S30453
AT3 ASTM A320/A320M, Grade B8LN, Class 1, Scale Free Bright Finish Required Stainless Steel S30453
AT4 ASTM A320/A320M, Grade B8MLN, Class 1 Stainless Steel S31653
48
ASME B18.24-2015

NOTE:
ASTM A320/A320M – Alloy-Steel Bolting Materials for Low-Temperature Service (Cont’d)
AT5 ASTM A320/A320M, Grade B8MLN, Class 1, Scale Free Bright Finish Required Stainless Steel S31653
AT6 ASTM A320/A320M, Grade B8A, Class 1A Stainless Steel —
AT7 ASTM A320/A320M, Grade B8A, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AT8 ASTM A320/A320M, Grade B8CA, Class 1A Stainless Steel —
AT9 ASTM A320/A320M, Grade B8CA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AU0 ASTM A320/A320M, Grade B8MA, Class 1A Stainless Steel —
AU1 ASTM A320/A320M, Grade B8MA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AU2 ASTM A320/A320M, Grade B8PA, Class 1A Stainless Steel —
AU3 ASTM A320/A320M, Grade B8PA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AU4 ASTM A320/A320M, Grade B8FA, Class 1A Stainless Steel —
AU5 ASTM A320/A320M, Grade B8FA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AU6 ASTM A320/A320M, Grade B8TA, Class 1A Stainless Steel —
AU7 ASTM A320/A320M, Grade B8TA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AU8 ASTM A320/A320M, Grade B8LNA, Class 1A Stainless Steel —
AU9 ASTM A320/A320M, Grade B8LNA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AV0 ASTM A320/A320M, Grade B8MLNA, Class 1A Stainless Steel —
AV1 ASTM A320/A320M, Grade B8MLNA, Class 1A, Scale Free Bright Finish Required Stainless Steel —
AV2 ASTM A320/A320M, Grade B8, Class 2 Stainless Steel S30400
AV3 ASTM A320/A320M, Grade B8, Class 2, Scale Free Bright Finish Required Stainless Steel S30400
AV4 ASTM A320/A320M, Grade B8C, Class 2 Stainless Steel S34700
AV5 ASTM A320/A320M, Grade B8C, Class 2, Scale Free Bright Finish Required Stainless Steel S34700
AV6 ASTM A320/A320M, Grade B8P, Class 2 Stainless Steel S30500
AV7 ASTM A320/A320M, Grade B8P, Class 2, Scale Free Bright Finish Required Stainless Steel S30500
AV8 ASTM A320/A320M, Grade B8F, Class 2 Stainless Steel S30323
AV9 ASTM A320/A320M, Grade B8F, Class 2, Scale Free Bright Finish Required Stainless Steel S30323
AW0 ASTM A320/A320M, Grade B8M, Class 2 Stainless Steel S31600
AW1 ASTM A320/A320M, Grade B8M, Class 2, Scale Free Bright Finish Required Stainless Steel S31600
AW2 ASTM A320/A320M, Grade B8T, Class 2 Stainless Steel S32100
AW3 ASTM A320/A320M, Grade B8T, Class 2, Scale Free Bright Finish Required Stainless Steel S32100
49
ASME B18.24-2015

NOTE:
ASTM A325 – Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
AW4 ASTM A325, Grade Type 1 Carbon Steel K02706
AW5 ASTM A325, Grade Type 3 Carbon Steel K11510
ASTM A325M – Structural Bolts, Steel Heat Treated 830 MPa Minimum Tensile Strength (Metric)
AW6 ASTM A325M, Grade Type 1 Carbon Steel —
AW7 ASTM A325M, Grade Type 3 Carbon Steel —
ASTM A354 – Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
AW8 ASTM A354, Grade BC Alloy Steel K04100
AW9 ASTM A354, Grade BD Alloy Steel K04100
ASTM A394 – Steel Transmission Tower Bolts, Zinc-Coated and Bare
AX0 ASTM A394, Grade Type 0 Carbon Steel —
AX3 ASTM A394, Grade Type 3 Stainless Steel —
ASTM A449 – Quenched and Tempered Steel Bolts and Studs
AX4 ASTM A449, Grade Type 1 Carbon Steel K04200
AX5 ASTM A449, Grade Type 2 Carbon Steel K04200
AX6 ASTM A449, Grade Type 1 or 2 Carbon Steel K04200
ASTM A453/A453M – Quenched and Tempered Steel Bolts and Studs
AX7 ASTM A453/A453M, Grade 660, Class A (130 ksi) Stainless Steel S66286
AX8 ASTM A453/A453M, Grade 660, Class B (130 ksi) Stainless Steel S66286
AX9 ASTM A453/A453M, Grade 660, Class C (130 ksi) Stainless Steel S66286
AY0 ASTM A453/A453M, Grade 651, Class A (100 ksi) Stainless Steel S63198
50
ASME B18.24-2015

NOTE:
ASTM A453/A453M – Quenched and Tempered Steel Bolts and Studs (Cont’d)
AY1 ASTM A453/A453M, Grade 651, Class B (95 ksi) Stainless Steel S63198
ASTM A489 – Carbon Steel Lifting Eyes
AY6 ASTM A489, Type 1, Style A Carbon Steel K04800
AY7 ASTM A489, Type 1, Style B Carbon Steel K04800
AY8 ASTM A489, Type 2, Style A Carbon Steel K04800
AY9 ASTM A489, Type 2, Style B Carbon Steel K04800
ASTM A490 – Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
AZ0 ASTM A490, Type 1 Alloy Steel K03900
AZ1 ASTM A490, Type 3 Alloy Steel K03900
ASTM A490M – High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
AZ2 ASTM A490M, Type 1 Alloy Steel K03900
AZ3 ASTM A490M, Type 3 Alloy Steel K03900
ASTM A563 – Carbon and Alloy Steel Nuts
AZ4 ASTM A563, Grade A Carbon Steel K05802
AZ5 ASTM A563, Grade B Carbon Steel K05802
AZ6 ASTM A563, Grade D Carbon Steel K05801
AZ7 ASTM A563, Grade DH Carbon Steel K03800
AZ8 ASTM A563, Grade DH3 Alloy Steel K13650
AZ9 ASTM A563, Grade C Carbon Steel K05802
BA0 ASTM A563, Grade C3 Alloy Steel —
BA1 ASTM A563, Grade O Carbon Steel K05802
51
ASME B18.24-2015

NOTE:
ASTM A563M – Carbon and Alloy Steel Nuts (Metric)
BA2 ASTM A563M, Property Class 5 Carbon/Alloy Steel —
BA3 ASTM A563M, Property Class 5 Overtapped Carbon/Alloy Steel —
BA4 ASTM A563M, Property Class 8S Carbon/Alloy Steel —
BA5 ASTM A563M, Property Class 8S3 Carbon/Alloy Steel —
BA8 ASTM A563M, Property Class 10S3 Carbon/Alloy Steel —
BA9 ASTM A563M, Property Class 10S Overtapped Carbon/Alloy Steel —
BB0 ASTM A563M, Property Class 10S Carbon/Alloy Steel —
BB1 ASTM A563M, Property Class 12 Carbon/Alloy Steel —
BB2 ASTM A563M, Property Class 12 Overtapped Carbon/Alloy Steel —
ASTM A574 – Alloy Steel Socket-Head Cap Screws
BB3 ASTM A574, Alloy Steel Alloy Steel —
BB4 ASTM A574, Grade 4037 Alloy Steel G40370
BC0 ASTM A574, Grade 4340 Alloy Steel G43400
BC1 ASTM A574, Grade 8740 Alloy Steel G87400
BC2 ASTM A574, Grade 5137M Alloy Steel K13745
BC3 ASTM A574, Grade 513B7M Alloy Steel K13647
ASTM A574M – Alloy Steel Socket-Head Cap Screws (Metric)
BC4 ASTM A574M, Alloy Steel Alloy Steel —
BC5 ASTM A574M, Grade 4037 Alloy Steel G40370
52
ASME B18.24-2015

NOTE:
ASTM A574M – Alloy Steel Socket-Head Cap Screws (Metric) (Cont’d)
BD0 ASTM A574M, Grade 4145 Alloy Steel G41450
BD3 ASTM A574M, Grade 5137M Alloy Steel K13745
BD4 ASTM A574M, Grade 513B7M Alloy Steel K13647
ASTM A687 – High-Strength Nonheaded Steel Bolts and Studs (Withdrawn 1999)
BD5 ASTM A687 Carbon Steel —
ASTM B99 – Copper-Silicon Alloy Wire
FA1 ASTM B99, Copper Alloy No. 651 Silicon Bronze C65100
FA2 ASTM B99, Copper Alloy No. 655 Silicon Bronze C65500
ASTM B159 – Phosphor Bronze Wire
FB1 ASTM B159, Copper Alloy No. 510 Phosphor Bronze C51000
ASTM B211 – Aluminum and Aluminum Alloy
FC1 ASTM B211, Alloy 7075 Aluminum A97075
ASTM F436 – Hardened Steel Washers
BD6 ASTM F436, Type 1 - Carbon Steel Carbon Steel —
BD7 ASTM F436, Type 3 - Weathering Steel Stainless Steel —
ASTM F436M – Hardened Steel Washers (Metric)
BD8 ASTM F436M, Type 1 - Carbon Steel Carbon Steel —
BD9 ASTM F436M, Type 3 - Weathering Steel Stainless Steel —
ASTM F467 – Nonferrous Nuts for General Use
BE0 ASTM F467, Alloy 110 ETP Copper C11000
BE1 ASTM F467, Alloy 110, Stress Relieved ETP Copper C11000
53
ASME B18.24-2015

NOTE:
ASTM F467 – Nonferrous Nuts for General Use (Cont’d)
BE2 ASTM F467, Alloy 270 Brass C27000
BE3 ASTM F467, Alloy 270, Stress Relieved Brass C27000
BE4 ASTM F467, Alloy 462 Naval Brass C46200
BE5 ASTM F467, Alloy 462, Stress Relieved Naval Brass C46200
BE6 ASTM F467, Alloy 464 Naval Brass C46400
BE7 ASTM F467, Alloy 464, Stress Relieved Naval Brass C46400
BE8 ASTM F467, Alloy 510 Phosphor Bronze C51000
BE9 ASTM F467, Alloy 510, Stress Relieved Phosphor Bronze C51000
BF0 ASTM F467, Alloy 613 Aluminum Bronze C61300
BF1 ASTM F467, Alloy 613, Stress Relieved Aluminum Bronze C61300
BF6 ASTM F467, Alloy 642 Aluminum Silicon Bronze C64200
BF7 ASTM F467, Alloy 642, Stress Relieved Aluminum Silicon Bronze C64201
BF8 ASTM F467, Alloy 651 Silicon Bronze C65100
BF9 ASTM F467, Alloy 651, Stress Relieved Silicon Bronze C65100
BG0 ASTM F467, Alloy 655 Silicon Bronze C65500
BG1 ASTM F467, Alloy 655, Stress Relieved Silicon Bronze C65500
BG2 ASTM F467, Alloy 661 Silicon Bronze C66100
BG3 ASTM F467, Alloy 661, Stress Relieved Silicon Bronze C66100
BG4 ASTM F467, Alloy 675 Manganese Bronze C67500
BG5 ASTM F467, Alloy 675, Stress Relieved Manganese Bronze C67500
BG6 ASTM F467, Alloy 710 Cupro-Nickel C71000
BG7 ASTM F467, Alloy 710, Stress Relieved Cupro-Nickel C71000
BG8 ASTM F467, Alloy 715 Cupro-Nickel C71500
BG9 ASTM F467, Alloy 715, Stress Relieved Cupro-Nickel C71500
BH0 ASTM F467, Alloy 335 Ni-Mo N10001
BH1 ASTM F467, Alloy 335, Stress Relieved Ni-Mo N10001
BH2 ASTM F467, Alloy 276 Ni-Mo-Cr N10276
54
ASME B18.24-2015

NOTE:
ASTM F467 – Nonferrous Nuts for General Use (Cont’d)
BH3 ASTM F467, Alloy 276, Stress Relieved Ni-Mo-Cr N10276
BH4 ASTM F467, Alloy 400 Ni-Cu Class A N04400
BH5 ASTM F467, Alloy 400, Stress Relieved Ni-Cu Class A N04400
BH6 ASTM F467, Alloy 405 Ni-Cu Class B N04405
BH7 ASTM F467, Alloy 405, Stress Relieved Ni-Cu Class B N04405
BH8 ASTM F467, Alloy 500 Ni-Cu-Al N05500
BH9 ASTM F467, Alloy 500, Stress Relieved Ni-Cu-Al N05500
BJ0 ASTM F467, Alloy 686 Ni-Cr-Mo-W N06686
BJ1 ASTM F467, Alloy 686, Stress Relieved Ni-Cr-Mo-W N06686
BJ2 ASTM F467, Alloy 2024 Aluminum 2024 A92024
BJ3 ASTM F467, Alloy 2024, Stress Relieved Aluminum 2024 A92024
BJ8 ASTM F467, Alloy 1 Titanium Gr 1 R50250
BJ9 ASTM F467, Alloy 1, Stress Relieved Titanium Gr 1 R50250
BK0 ASTM F467, Alloy 2 Titanium Gr 2 R50400
BK1 ASTM F467, Alloy 2, Stress Relieved Titanium Gr 2 R50400
BK6 ASTM F467, Alloy 23 Titanium Ti-6Al-4V R56401
BK7 ASTM F467, Alloy 23, Stress Relieved Titanium Ti-6Al-4V R56401
BL0 ASTM F467, Alloy 19 Titanium Ti-38-6-44 R58640
BL1 ASTM F467, Alloy 19, Stress Relieved Titanium Ti-38-6-44 R58640
BL2 ASTM F467, Alloy 32 Titanium Ti-5-1-1-1 R55111
BL3 ASTM F467, Alloy 32, Stress Relieved Titanium Ti-5-1-1-1 R55111
55
ASME B18.24-2015

NOTE:
ASTM F467M – Nonferrous Nuts for General Use (Metric)
BL4 ASTM F467M, Alloy 110 ETP Copper C11000
BL5 ASTM F467M, Alloy 110, Stress Relieved ETP Copper C11000
BL6 ASTM F467M, Alloy 270 Brass C27000
BL7 ASTM F467M, Alloy 270, Stress Relieved Brass C27000
BL8 ASTM F467M, Alloy 462 Naval Brass C46200
BL9 ASTM F467M, Alloy 462, Stress Relieved Naval Brass C46200
BM0 ASTM F467M, Alloy 464 Naval Brass C46400
BM1 ASTM F467M, Alloy 464, Stress Relieved Naval Brass C46400
BM2 ASTM F467M, Alloy 510 Phosphor Bronze C51000
BM3 ASTM F467M, Alloy 510, Stress Relieved Phosphor Bronze C51000
BM4 ASTM F467M, Alloy 614 Aluminum Bronze C61400
BM5 ASTM F467M, Alloy 614, Stress Relieved Aluminum Bronze C61400
BM6 ASTM F467M, Alloy 630 Aluminum Bronze C63000
BM7 ASTM F467M, Alloy 630, Stress Relieved Aluminum Bronze C63000
BM8 ASTM F467M, Alloy 642 Aluminum Silicon Bronze C64200
BM9 ASTM F467M, Alloy 642, Stress Relieved Aluminum Silicon Bronze C64201
BN0 ASTM F467M, Alloy 651 Silicon Bronze C65100
BN1 ASTM F467M, Alloy 651, Stress Relieved Silicon Bronze C65100
BN6 ASTM F467M, Alloy 675 Manganese Bronze C67500
BN7 ASTM F467M, Alloy 675, Stress Relieved Manganese Bronze C67500
BN8 ASTM F467M, Alloy 710 Cupro-Nickel C71000
BN9 ASTM F467M, Alloy 710, Stress Relieved Cupro-Nickel C71000
BP0 ASTM F467M, Alloy 715 Cupro-Nickel C71500
BP1 ASTM F467M, Alloy 715, Stress Relieved Cupro-Nickel C71500
BP2 ASTM F467M, Alloy 335 Ni-Mo N10001
BP3 ASTM F467M, Alloy 335, Stress Relieved Ni-Mo N10001
BP4 ASTM F467M, Alloy 276 Ni-Mo-Cr N10276
56
ASME B18.24-2015

NOTE:
ASTM F467M – Nonferrous Nuts for General Use (Metric) (Cont’d)
BP5 ASTM F467M, Alloy 276, Stress Relieved Ni-Mo-Cr N10276
BP6 ASTM F467M, Alloy 400 Ni-Cu Class A N04400
BP7 ASTM F467M, Alloy 400, Stress Relieved Ni-Cu Class A N04400
BP8 ASTM F467M, Alloy 405 Ni-Cu Class B N04405
BP9 ASTM F467M, Alloy 405, Stress Relieved Ni-Cu Class B N04405
BQ0 ASTM F467M, Alloy 500 Ni-Cu-Al N05500
BQ1 ASTM F467M, Alloy 500, Stress Relieved Ni-Cu-Al N05500
BQ2 ASTM F467M, Alloy 686 Ni-Cr-Mo-W N06686
BQ3 ASTM F467M, Alloy 686, Stress Relieved Ni-Cr-Mo-W N06686
BQ4 ASTM F467M, Alloy 2024 Aluminum 2024 A92024
BQ5 ASTM F467M, Alloy 2024, Stress Relieved Aluminum 2024 A92024
BR0 ASTM F467M, Alloy 1 Titanium Gr 1 R50250
BR1 ASTM F467M, Alloy 1, Stress Relieved Titanium Gr 1 R50250
BR8 ASTM F467M, Alloy 23 Titanium Ti-6Al-4V R56401
BR9 ASTM F467M, Alloy 23, Stress Relieved Titanium Ti-6Al-4V R56401
BS0 ASTM F467M, Alloy 7 Titanium Gr 7 R52400
BS1 ASTM F467M, Alloy 7, Stress Relieved Titanium Gr 7 R52400
BS2 ASTM F467M, Alloy 19 Titanium Ti-38-6-44 R58640
BS3 ASTM F467M, Alloy 19, Stress Relieved Titanium Ti-38-6-44 R58640
BS4 ASTM F467M, Alloy 32 Titanium Ti-5-1-1-1 R55111
BS5 ASTM F467M, Alloy 32, Stress Relieved Titanium Ti-5-1-1-1 R55111
57
ASME B18.24-2015

NOTE:
ASTM F468 – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
BS6 ASTM F468, Alloy 110 ETP Copper C11000
BS7 ASTM F468, Alloy 110, Stress Relieved ETP Copper C11000
BS8 ASTM F468, Alloy 270 Brass C27000
BS9 ASTM F468, Alloy 270, Stress Relieved Brass C27000
BT0 ASTM F468, Alloy 462 Naval Brass C46200
BT1 ASTM F468, Alloy 462, Stress Relieved Naval Brass C46200
BT2 ASTM F468, Alloy 464 Naval Brass C46400
BT3 ASTM F468, Alloy 464, Stress Relieved Naval Brass C46400
BT4 ASTM F468, Alloy 510 Phosphor Bronze C51000
BT5 ASTM F468, Alloy 510, Stress Relieved Phosphor Bronze C51000
BT6 ASTM F468, Alloy 613 Aluminum Bronze C61300
BT7 ASTM F468, Alloy 613, Stress Relieved Aluminum Bronze C61300
BT8 ASTM F468, Alloy 614 Aluminum Bronze C61400
BT9 ASTM F468, Alloy 614, Stress Relieved Aluminum Bronze C61400
BU0 ASTM F468, Alloy 630 Aluminum Bronze C63000
BU1 ASTM F468, Alloy 630, Stress Relieved Aluminum Bronze C63000
BU2 ASTM F468, Alloy 642 Aluminum Silicon Bronze C64200
BU3 ASTM F468, Alloy 642, Stress Relieved Aluminum Silicon Bronze C64201
BU4 ASTM F468, Alloy 651 Silicon Bronze C65100
BU5 ASTM F468, Alloy 651, Stress Relieved Silicon Bronze C65100
BV0 ASTM F468, Alloy 675 Manganese Bronze C67500
BV1 ASTM F468, Alloy 675, Stress Relieved Manganese Bronze C67500
BV2 ASTM F468, Alloy 710 Cupro-Nickel C71000
BV3 ASTM F468, Alloy 710, Stress Relieved Cupro-Nickel C71000
BV4 ASTM F468, Alloy 715 Cupro-Nickel C71500
BV5 ASTM F468, Alloy 715, Stress Relieved Cupro-Nickel C71500
BV6 ASTM F468, Alloy 335 Ni-Mo N10001
58
ASME B18.24-2015

NOTE:
ASTM F468 – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Cont’d)
BV7 ASTM F468, Alloy 335, Stress Relieved Ni-Mo N10001
BV8 ASTM F468, Alloy 276 Ni-Mo-Cr N10276
BV9 ASTM F468, Alloy 276, Stress Relieved Ni-Mo-Cr N10276
BW0 ASTM F468, Alloy 400 Ni-Cu Class A N04400
BW1 ASTM F468, Alloy 400, Stress Relieved Ni-Cu Class A N04400
BW2 ASTM F468, Alloy 405 Ni-Cu Class B N04405
BW3 ASTM F468, Alloy 405, Stress Relieved Ni-Cu Class B N04405
BW4 ASTM F468, Alloy 500 Ni-Cu-Al N05500
BW5 ASTM F468, Alloy 500, Stress Relieved Ni-Cu-Al N05500
BW6 ASTM F468, Alloy 686 Ni-Cr-Mo-W N06686
BW7 ASTM F468, Alloy 686, Stress Relieved Ni-Cr-Mo-W N06686
BW8 ASTM F468, Alloy 2024 Aluminum 2024 A92024
BW9 ASTM F468, Alloy 2024, Stress Relieved Aluminum 2024 A92024
BX0 ASTM F468, Alloy 6061 Aluminum 6061 A96061
BX1 ASTM F468, Alloy 6061, Stress Relieved Aluminum 6061 A96061
BX2 ASTM F468, Alloy 7075 Aluminum 7075 A97075
BX3 ASTM F468, Alloy 7075, Stress Relieved Aluminum 7075 A97075
BX4 ASTM F468, Alloy 1 Titanium Gr 1 R50250
BX5 ASTM F468, Alloy 1, Stress Relieved Titanium Gr 1 R50250
BY0 ASTM F468, Alloy 5A Titanium Gr 5 R56400
BY1 ASTM F468, Alloy 5A, Stress Relieved Titanium Gr 5 R56400
BY2 ASTM F468, Alloy 5B Titanium Gr 5 R56400
BY3 ASTM F468, Alloy 5B, Stress Relieved Titanium Gr 5 R56400
BY4 ASTM F468, Alloy 23 Titanium Ti-6Al-4V R56401
BY5 ASTM F468, Alloy 23, Stress Relieved Titanium Ti-6Al-4V R56401
BY6 ASTM F468, Alloy 7 Titanium Gr 7 R52400
BY7 ASTM F468, Alloy 7, Stress Relieved Titanium Gr 7 R52400
59
ASME B18.24-2015

NOTE:
ASTM F468 – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Cont’d)
BY8 ASTM F468, Alloy 19 Titanium Ti-38-6-44 R58640
BY9 ASTM F468, Alloy 19, Stress Relieved Titanium Ti-38-6-44 R58640
BZ0 ASTM F468, Alloy 32 Titanium Ti-5-1-1-1 R55111
BZ1 ASTM F468, Alloy 32, Stress Relieved Titanium Ti-5-1-1-1 R55111
ASTM F468M – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
BZ2 ASTM F468M, Alloy 110 ETP Copper C11000
BZ3 ASTM F468M, Alloy 110, Stress Relieved ETP Copper C11000
BZ4 ASTM F468M, Alloy 270 Brass C27000
BZ5 ASTM F468M, Alloy 270, Stress Relieved Brass C27000
BZ6 ASTM F468M, Alloy 462 Naval Brass C46200
BZ7 ASTM F468M, Alloy 462, Stress Relieved Naval Brass C46200
BZ8 ASTM F468M, Alloy 464 Naval Brass C46400
BZ9 ASTM F468M, Alloy 464, Stress Relieved Naval Brass C46400
CA0 ASTM F468M, Alloy 510 Phosphor Bronze C51000
CA1 ASTM F468M, Alloy 510, Stress Relieved Phosphor Bronze C51000
CA2 ASTM F468M, Alloy 613 Aluminum Bronze C61300
CA3 ASTM F468M, Alloy 613, Stress Relieved Aluminum Bronze C61300
CA8 ASTM F468M, Alloy 642 Aluminum Silicon Bronze C64200
CA9 ASTM F468M, Alloy 642, Stress Relieved Aluminum Silicon Bronze C64201
CB0 ASTM F468M, Alloy 651 Silicon Bronze C65100
CB1 ASTM F468M, Alloy 651, Stress Relieved Silicon Bronze C65100
CB6 ASTM F468M, Alloy 675 Manganese Bronze C67500
60
ASME B18.24-2015

NOTE:
ASTM F468M – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) (Cont’d)
CB7 ASTM F468M, Alloy 675, Stress Relieved Manganese Bronze C67500
CB8 ASTM F468M, Alloy 710 Cupro-Nickel C71000
CB9 ASTM F468M, Alloy 710, Stress Relieved Cupro-Nickel C71000
CC0 ASTM F468M, Alloy 715 Cupro-Nickel C71500
CC1 ASTM F468M, Alloy 715, Stress Relieved Cupro-Nickel C71500
CC2 ASTM F468M, Alloy 335 Ni-Mo N10001
CC3 ASTM F468M, Alloy 335, Stress Relieved Ni-Mo N10001
CC4 ASTM F468M, Alloy 276 Ni-Mo-Cr N10276
CC5 ASTM F468M, Alloy 276, Stress Relieved Ni-Mo-Cr N10276
CC6 ASTM F468M, Alloy 400 Ni-Cu Class A N04400
CC7 ASTM F468M, Alloy 400, Stress Relieved Ni-Cu Class A N04400
CC8 ASTM F468M, Alloy 405 Ni-Cu Class B N04405
CC9 ASTM F468M, Alloy 405, Stress Relieved Ni-Cu Class B N04405
CD0 ASTM F468M, Alloy 500 Ni-Cu-Al N05500
CD1 ASTM F468M, Alloy 500, Stress Relieved Ni-Cu-Al N05500
CD2 ASTM F468M, Alloy 686 Ni-Cr-Mo-W N06686
CD3 ASTM F468M, Alloy 686, Stress Relieved Ni-Cr-Mo-W N06686
CD4 ASTM F468M, Alloy 2024 Aluminum 2024 A92024
CD5 ASTM F468M, Alloy 2024, Stress Relieved Aluminum 2024 A92024
CE0 ASTM F468M, Alloy 1 Titanium Gr 1 R50250
CE1 ASTM F468M, Alloy 1, Stress Relieved Titanium Gr 1 R50250
CE6 ASTM F468M, Alloy 5A Titanium Gr 5 R56400
CE7 ASTM F468M, Alloy 5A, Stress Relieved Titanium Gr 5 R56400
CE8 ASTM F468M, Alloy 23 Titanium Ti-6Al-4V R56401
61
ASME B18.24-2015

NOTE:
ASTM F468M – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) (Cont’d)
CE9 ASTM F468M, Alloy 23, Stress Relieved Titanium Ti-6Al-4V R56401
CF0 ASTM F468M, Alloy 7 Titanium Gr 7 R52400
CF1 ASTM F468M, Alloy 7, Stress Relieved Titanium Gr 7 R52400
CF2 ASTM F468M, Alloy 19 Titanium Ti-38-6-44 R58640
CF3 ASTM F468M, Alloy 19, Stress Relieved Titanium Ti-38-6-44 R58640
CF4 ASTM F468M, Alloy 5B Titanium Gr 5 R56400
CF5 ASTM F468M, Alloy 5B, Stress Relieved Titanium Gr 5 R56400
CF6 ASTM F468M, Alloy 32 Titanium Ti-5-1-1-1 R55111
CF7 ASTM F468M, Alloy 32, Stress Relieved Titanium Ti-5-1-1-1 R55111
ASTM A502 – Specifications for Steel Structural Rivets
EP8 ASTM A502, Grade 1 Carbon Steel –
EP9 ASTM A502, Grade 2 Carbon Steel –
EQ0 ASTM A502, Grade 3 Carbon Steel –
ASTM F541 – Alloy Steel Eyebolts
CF8 ASTM F541, Alloy Steel Alloy Steel —
ASTM F568M – Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric) [Note (1)]
CF9 ASTM F568M, Grade 4.6 Low or Medium Carbon Steel Carbon Steel —
CG0 ASTM F568M, Grade 4.8 Low or Medium Carbon Steel, Annealed Carbon Steel —
CG1 ASTM F568M, Grade 5.8 Low or Medium Carbon Steel, Cold Worked Carbon Steel —
CG2 ASTM F568M, Grade 8.8 Medium Carbon Steel, Quenched and Tempered Carbon Steel —
CG3 ASTM F568M, Grade 8.8 Low Carbon Martensitic Steel, Quenched and Tempered Carbon Steel —
CG4 ASTM F568M, Grade 8.8.3 Corrosion Resistant Steel, Quenched and Tempered Carbon Steel —
CG6 ASTM F568M, Grade 9.8 Low Carbon Martensitic Steel, Quenched and Tempered Carbon Steel —
CG8 ASTM F568M, Grade 10.9 Medium Carbon Alloy Steel, Quenched and Tempered Alloy Steel —
CG9 ASTM F568M, Grade 10.9 Low Carbon Steel Carbon Steel —
CH0 ASTM F568M, Grade 10.9.3 Corrosion Resistant Steel, Quenched and Tempered Carbon Steel —
CH1 ASTM F568M, Grade 12.9 Alloy Steel, Quenched and Tempered Alloy Steel —
62
ASME B18.24-2015

NOTE:
ASTM F593 – Stainless Steel Bolts, Hex Cap Screws, and Studs
CH2 ASTM F593, Alloy Group 1, Default Condition CW Stainless Steel —
CH3 ASTM F593, Alloy Group 1, Condition AF Stainless Steel —
CH4 ASTM F593, Alloy Group 1, Condition A Stainless Steel —
CH5 ASTM F593, Alloy Group 1, Condition SH Stainless Steel —
CH6 ASTM F593, Alloy Group 2, Default Condition CW Stainless Steel —
CH7 ASTM F593, Alloy Group 2, Condition AF Stainless Steel —
CH8 ASTM F593, Alloy Group 2, Condition A Stainless Steel —
CH9 ASTM F593, Alloy Group 2, Condition SH Stainless Steel —
CJ0 ASTM F593, Alloy Group 3, Default Condition CW Stainless Steel —
CJ1 ASTM F593, Alloy Group 3, Condition AF Stainless Steel —
CJ2 ASTM F593, Alloy Group 3, Condition A Stainless Steel —
CJ3 ASTM F593, Alloy Group 3, Condition SH Stainless Steel —
CJ4 ASTM F593, Alloy Group 4, Default Condition CW Stainless Steel S43000
CJ5 ASTM F593, Alloy Group 4, Condition A Stainless Steel S43000
CJ6 ASTM F593, Alloy Group 5, Default Condition H Stainless Steel S41000
CJ7 ASTM F593, Alloy Group 5, Condition HT Stainless Steel S41000
CJ8 ASTM F593, Alloy Group 6, Default Condition H Stainless Steel S43100
CJ9 ASTM F593, Alloy Group 6, Condition HT Stainless Steel S43100
CK0 ASTM F593, Alloy Group 7, Default Condition AH Stainless Steel S17400
CK1 ASTM F593, Alloy Group 7, Condition NONE Stainless Steel S17400
CK2 ASTM F593, Alloy 303 only, Default Condition CW Stainless Steel S30300
CK3 ASTM F593, Alloy 303 only, Condition AF Stainless Steel S30300
CK4 ASTM F593, Alloy 303 only, Condition A Stainless Steel S30300
CK5 ASTM F593, Alloy 303 only, Condition SH Stainless Steel S30300
CK6 ASTM F593, Alloy 303 Se only, Default Condition CW Stainless Steel S30323
CK7 ASTM F593, Alloy 303 Se only, Condition AF Stainless Steel S30323
CK8 ASTM F593, Alloy 303 Se only, Condition A Stainless Steel S30323
CK9 ASTM F593, Alloy 303 Se only, Condition SH Stainless Steel S30323
CL0 ASTM F593, Alloy 304 only, Default Condition CW Stainless Steel S30400
CL1 ASTM F593, Alloy 304 only, Condition AF Stainless Steel S30400
CL2 ASTM F593, Alloy 304 only, Condition A Stainless Steel S30400
63
ASME B18.24-2015

NOTE:
ASTM F593 – Stainless Steel Bolts, Hex Cap Screws, and Studs (Cont’d)
CL3 ASTM F593, Alloy 304 only, Condition SH Stainless Steel S30400
CL4 ASTM F593, Alloy 304L only, Default Condition CW Stainless Steel S30403
CL5 ASTM F593, Alloy 384 L only, Condition AF Stainless Steel S30403
CL6 ASTM F593, Alloy 384 L only, Condition A Stainless Steel S30403
CL7 ASTM F593, Alloy 384 L only, Condition SH Stainless Steel S30403
CL8 ASTM F593, Alloy 305 only, Default Condition CW Stainless Steel S30500
CL9 ASTM F593 Alloy 305 only, Condition AF Stainless Steel S30500
CM0 ASTM F593, Alloy 305 only, Condition A Stainless Steel S30500
CM1 ASTM F593, Alloy 305 only, Condition SH Stainless Steel S30500
CM2 ASTM F593, Alloy 384 only, Default Condition CW Stainless Steel S38400
CM3 ASTM F593, Alloy 384 only, Condition AF Stainless Steel S38400
CM4 ASTM F593, Alloy 384 only, Condition A Stainless Steel S38400
CM5 ASTM F593, Alloy 384 only, Condition SH Stainless Steel S38400
CM6 ASTM F593, Alloy XM1 only, Default Condition CW Stainless Steel S20300
CM7 ASTM F593, Alloy XM1 only, Condition AF Stainless Steel S20300
CM8 ASTM F593, Alloy XM1 only, Condition A Stainless Steel S20300
CM9 ASTM F593, Alloy XM1 only, Condition SH Stainless Steel S20300
CN0 ASTM F593, Alloy 18-9LW only, Default Condition CW Stainless Steel S30430
CN1 ASTM F593, Alloy 18-9LW only, Condition AF Stainless Steel S30430
CN2 ASTM F593, Alloy 18-9LW only, Condition A Stainless Steel S30430
CN3 ASTM F593, Alloy 18-9LW only, Condition SH Stainless Steel S30430
CN4 ASTM F593, Alloy 302HQ (XM7) only, Default Condition CW Stainless Steel S30433
CN5 ASTM F593, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
CN6 ASTM F593, Alloy 302HQ (XM7) only, Condition A Stainless Steel S30433
CN7 ASTM F593, Alloy 302HQ (XM7) only, Condition SH Stainless Steel S30433
CN8 ASTM F593, Alloy 316 only, Default Condition CW Stainless Steel S31600
CN9 ASTM F593, Alloy 316 only, Condition AF Stainless Steel S31600
CP0 ASTM F593, Alloy 316 only, Condition A Stainless Steel S31600
CP1 ASTM F593, Alloy 316 only, Condition SH Stainless Steel S31600
CP2 ASTM F593, Alloy 316L only, Default Condition CW Stainless Steel S31603
CP3 ASTM F593, Alloy 316L only, Condition AF Stainless Steel S31603
64
ASME B18.24-2015

NOTE:
ASTM F593 – Stainless Steel Bolts, Hex Cap Screws, and Studs (Cont’d)
CP4 ASTM F593, Alloy 316L only, Condition A Stainless Steel S31603
CP5 ASTM F593, Alloy 316L only, Condition SH Stainless Steel S31603
CP6 ASTM F593, Alloy 321 only, Default Condition CW Stainless Steel S32100
CP7 ASTM F593, Alloy 321 only, Condition AF Stainless Steel S32100
CP8 ASTM F593, Alloy 321 only, Condition A Stainless Steel S32100
CP9 ASTM F593, Alloy 321 only, Condition SH Stainless Steel S32100
CQ0 ASTM F593, Alloy 347 only, Default Condition CW Stainless Steel S34700
CQ1 ASTM F593, Alloy 347 only, Condition AF Stainless Steel S34700
CQ2 ASTM F593, Alloy 347 only, Condition A Stainless Steel S34700
CQ3 ASTM F593, Alloy 347 only, Condition SH Stainless Steel S34700
CQ4 ASTM F593, Alloy 430 only, Default Condition CW Stainless Steel S43000
CQ5 ASTM F593, Alloy 430 only, Condition A Stainless Steel S43000
CQ6 ASTM F593, Alloy 430F only, Default Condition CW Stainless Steel S43020
CQ7 ASTM F593, Alloy 430F only, Condition A Stainless Steel S43020
CQ8 ASTM F593, Alloy 410 only, Default Condition H Stainless Steel S41000
CQ9 ASTM F593, Alloy 410 only, Condition HT Stainless Steel S41000
CR0 ASTM F593, Alloy 416 only, Default Condition H Stainless Steel S41600
CR1 ASTM F593, Alloy 416 only, Condition HT Stainless Steel S41600
CR2 ASTM F593, Alloy 416 Se only, Default Condition H Stainless Steel S41623
CR3 ASTM F593, Alloy 416 Se only, Condition HT Stainless Steel S41623
ASTM F594 – Stainless Steel Nuts
CR4 ASTM F594, Alloy Group 1, Default Condition CW Stainless Steel —
CR5 ASTM F594, Alloy Group 1, Condition AF Stainless Steel —
CR6 ASTM F594, Alloy Group 1, Condition A Stainless Steel —
CR7 ASTM F594, Alloy Group 1, Condition SH Stainless Steel —
CR8 ASTM F594, Alloy Group 2, Default Condition CW Stainless Steel —
CR9 ASTM F594, Alloy Group 2, Condition AF Stainless Steel —
CS0 ASTM F594, Alloy Group 2, Condition A Stainless Steel —
CS1 ASTM F594, Alloy Group 2, Condition SH Stainless Steel —
CS2 ASTM F594, Alloy Group 3, Default Condition CW Stainless Steel —
65
ASME B18.24-2015

NOTE:
ASTM F594 – Stainless Steel Nuts (Cont’d)
CS3 ASTM F594, Alloy Group 3, Condition AF Stainless Steel —
CS4 ASTM F594, Alloy Group 3, Condition A Stainless Steel —
CS5 ASTM F594, Alloy Group 3, Condition SH Stainless Steel —
CS6 ASTM F594, Alloy Group 4, Default Condition CW Stainless Steel S43000
CS7 ASTM F594, Alloy Group 4, Condition A Stainless Steel S43000
CS8 ASTM F594, Alloy Group 5, Default Condition H Stainless Steel S41000
CS9 ASTM F594, Alloy Group 5, Condition HT Stainless Steel S41000
CT0 ASTM F594, Alloy Group 6, Default Condition H Stainless Steel S43100
CT1 ASTM F594, Alloy Group 6, Condition HT Stainless Steel S43100
CT2 ASTM F594, Alloy Group 7, Default Condition AH Stainless Steel S17400
CT3 ASTM F594, Alloy Group 7, Condition NONE Stainless Steel S17400
CT4 ASTM F594, Alloy 303 only, Default Condition CW Stainless Steel S30300
CT5 ASTM F594, Alloy 303 only, Condition AF Stainless Steel S30300
CT6 ASTM F594, Alloy 303 only, Condition A Stainless Steel S30300
CT7 ASTM F594, Alloy 303 only, Condition SH Stainless Steel S30300
CT8 ASTM F594, Alloy 303 Se only, Default Condition CW Stainless Steel S30323
CT9 ASTM F594, Alloy 303 Se only, Condition AF Stainless Steel S30323
CU0 ASTM F594, Alloy 303 Se only, Condition A Stainless Steel S30323
CU1 ASTM F594, Alloy 303 Se only, Condition SH Stainless Steel S30323
CU2 ASTM F594, Alloy 304 only, Default Condition CW Stainless Steel S30400
CU3 ASTM F594, Alloy 304 only, Condition AF Stainless Steel S30400
CU4 ASTM F594, Alloy 304 only, Condition A Stainless Steel S30400
CU5 ASTM F594, Alloy 304 only, Condition SH Stainless Steel S30400
CU6 ASTM F594, Alloy 304L only, Default Condition CW Stainless Steel S30403
CU7 ASTM F594, Alloy 384 L only, Condition AF Stainless Steel S30403
CU8 ASTM F594, Alloy 384 L only, Condition A Stainless Steel S30403
CU9 ASTM F594, Alloy 384 L only, Condition SH Stainless Steel S30403
CV0 ASTM F594, Alloy 305 only, Default Condition CW Stainless Steel S30500
CV1 ASTM F594, Alloy 305 only, Condition AF Stainless Steel S30500
CV2 ASTM F594, Alloy 305 only, Condition A Stainless Steel S30500
CV3 ASTM F594, Alloy 305 only, Condition SH Stainless Steel S30500
66
ASME B18.24-2015

NOTE:
CV4 ASTM F594, Alloy 384 only, Default Condition CW Stainless Steel S38400
CV5 ASTM F594, Alloy 384 only, Condition AF Stainless Steel S38400
CV6 ASTM F594, Alloy 384 only, Condition A Stainless Steel S38400
CV7 ASTM F594, Alloy 384 only, Condition SH Stainless Steel S38400
CV8 ASTM F594, Alloy XM1 only, Default Condition CW Stainless Steel S20300
CV9 ASTM F594, Alloy XM1 only, Condition AF Stainless Steel S20300
CW0 ASTM F594, Alloy XM1 only, Condition A Stainless Steel S20300
CW1 ASTM F594, Alloy XM1 only, Condition SH Stainless Steel S20300
CW2 ASTM F594, Alloy 18-9LW only, Default Condition CW Stainless Steel S30430
CW3 ASTM F594, Alloy 18-9LW only, Condition AF Stainless Steel S30430
CW4 ASTM F594, Alloy 18-9LW only, Condition A Stainless Steel S30430
CW5 ASTM F594, Alloy 18-9LW only, Condition SH Stainless Steel S30430
CW6 ASTM F594, Alloy 302HQ (XM7) only, Default Condition CW Stainless Steel S30433
CW7 ASTM F594, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
CW8 ASTM F594, Alloy 302HQ (XM7) only, Condition A Stainless Steel S30433
CW9 ASTM F594, Alloy 302HQ (XM7) only, Condition SH Stainless Steel S30433
CX0 ASTM F594, Alloy 316 only, Default Condition CW Stainless Steel S31600
CX1 ASTM F594, Alloy 316 only, Condition AF Stainless Steel S31600
CX2 ASTM F594, Alloy 316 only, Condition A Stainless Steel S31600
CX3 ASTM F594, Alloy 316 only, Condition SH Stainless Steel S31600
CX4 ASTM F594, Alloy 316L only, Default Condition CW Stainless Steel S31603
CX5 ASTM F594, Alloy 316L only, Condition AF Stainless Steel S31603
CX6 ASTM F594, Alloy 316L only, Condition A Stainless Steel S31603
CX7 ASTM F594, Alloy 316L only, Condition SH Stainless Steel S31603
CX8 ASTM F594, Alloy 321 only, Default Condition CW Stainless Steel S32100
CX9 ASTM F594, Alloy 321 only, Condition AF Stainless Steel S32100
CY0 ASTM F594, Alloy 321 only, Condition A Stainless Steel S32100
CY1 ASTM F594, Alloy 321 only, Condition SH Stainless Steel S32100
CY2 ASTM F594, Alloy 347 only, Default Condition CW Stainless Steel S34700
CY3 ASTM F594, Alloy 347 only, Condition AF Stainless Steel S34700
67
ASME B18.24-2015

NOTE:
CY5 ASTM F594, Alloy 347 only, Condition SH Stainless Steel S34700
CY6 ASTM F594, Alloy 430 only, Default Condition CW Stainless Steel S43000
CY8 ASTM F594, Alloy 430F only, Default Condition CW Stainless Steel S43020
CY9 ASTM F594, Alloy 430F only, Condition A Stainless Steel S43020
CZ0 ASTM F594, Alloy 410 only, Default Condition H Stainless Steel S41000
CZ1 ASTM F594, Alloy 410 only, Condition HT Stainless Steel S41000
CZ2 ASTM F594, Alloy 416 only, Default Condition H Stainless Steel S41600
CZ3 ASTM F594, Alloy 416 only, Condition HT Stainless Steel S41600
CZ4 ASTM F594, Alloy 416 Se only, Default Condition H Stainless Steel S41623
CZ5 ASTM F594, Alloy 416 Se only, Condition HT Stainless Steel S41623
ASTM F738M – Stainless Steel Metric Bolts, Screws, and Studs (Metric)
CZ6 ASTM F738M, Class A1-50, Condition AF Stainless Steel —
CZ7 ASTM F738M, Class A1-70, Condition CW Stainless Steel —
CZ8 ASTM F738M, Class A1-80, Condition SH Stainless Steel —
CZ9 ASTM F738M, Class A2-50, Condition AF Stainless Steel —
DA0 ASTM F738M, Class A2-70, Condition CW Stainless Steel —
DA1 ASTM F738M, Class A2-80, Condition SH Stainless Steel —
DA2 ASTM F738M, Class A4-50, Condition AF Stainless Steel —
DA3 ASTM F738M, Class A4-70, Condition CW Stainless Steel —
DA4 ASTM F738M, Class A4-80, Condition SH Stainless Steel —
DA5 ASTM F738M, Class F1-45, Condition AF Stainless Steel S43000
DA6 ASTM F738M, Class F1-60, Condition CW Stainless Steel S43000
DA7 ASTM F738M, Class C1-50, Condition A Stainless Steel S41000
DA8 ASTM F738M, Class C1-70, Condition H Stainless Steel S41000
DA9 ASTM F738M, Class C1-110, Condition HT Stainless Steel S41000
DB0 ASTM F738M, Class C3-80, Condition H Stainless Steel S43100
DB1 ASTM F738M, Class C3-120, Condition HT Stainless Steel S43100
DB2 ASTM F738M, Class C4-50, Condition A Stainless Steel —
DB3 ASTM F738M, Class C4-70, Condition H Stainless Steel —
68
ASME B18.24-2015

NOTE:
ASTM F738M – Stainless Steel Metric Bolts, Screws, and Studs (Metric) (Cont’d)
DB4 ASTM F738M, Class C4-110, Condition HT Stainless Steel —
DB5 ASTM F738M, Class P1-90, Condition AH Stainless Steel S17400
DB6 ASTM F738M, Class A1-50, Alloy 303 only, Condition AF Stainless Steel S30300
DB7 ASTM F738M, Class A1-50, Alloy 303Se only, Condition AF Stainless Steel S30323
DB8 ASTM F738M, Class A1-50, Alloy 304 only, Condition AF Stainless Steel S30400
DB9 ASTM F738M, Class A1-50, Alloy 304L only, Condition AF Stainless Steel S30403
DC0 ASTM F738M, Class A1-50, Alloy 305 only, Condition AF Stainless Steel S30500
DC1 ASTM F738M, Class A1-50, Alloy 384 only, Condition AF Stainless Steel S38400
DC2 ASTM F738M, Class A1-50, Alloy XM1 only, Condition AF Stainless Steel S20300
DC3 ASTM F738M, Class A1-50, Alloy 18-9LW only, Condition AF Stainless Steel S30430
DC4 ASTM F738M, Class A1-50, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
DC5 ASTM F738M, Class A1-70, Alloy 303 only, Condition CW Stainless Steel S30300
DC6 ASTM F738M, Class A1-70, Alloy 303Se only, Condition CW Stainless Steel S30323
DC8 ASTM F738M, Class A1-70, Alloy 304L only, Condition CW Stainless Steel S30403
DD0 ASTM F738M, Class A1-70, Alloy 384 only, Condition CW Stainless Steel S38400
DD1 ASTM F738M, Class A1-70, Alloy XM1 only, Condition CW Stainless Steel S20300
DD2 ASTM F738M, Class A1-70, Alloy 18-9LW only, Condition CW Stainless Steel S30430
DD3 ASTM F738M, Class A1-70, Alloy 302HQ (XM7) only, Condition CW Stainless Steel S30433
DD4 ASTM F738M, Class A1-80, Alloy 303 only, Condition SH Stainless Steel S30300
DD5 ASTM F738M, Class A1-80, Alloy 303Se only, Condition SH Stainless Steel S30323
DD7 ASTM F738M, Class A1-80, Alloy 304L only, Condition SH Stainless Steel S30403
DE0 ASTM F738M, Class A1-80, Alloy XM1 only, Condition SH Stainless Steel S20300
DE1 ASTM F738M, Class A1-80, Alloy 18-9LW only, Condition SH Stainless Steel S30430
DE2 ASTM F738M, Class A1-80, Alloy 302HQ (XM7) only, Condition SH Stainless Steel S30433
DE3 ASTM F738M, Class A2-50, Alloy 321 only, Condition AF Stainless Steel S30400
69
ASME B18.24-2015

NOTE:
DE7 ASTM F738M, Class A2-80, Alloy 321 only, Condition SH Stainless Steel S20300
DE8 ASTM F738M, Class A2-80, Alloy 347 only, Condition SH Stainless Steel S30430
DF0 ASTM F738M, Class A4-50, Alloy 316L only, Condition AF Stainless Steel S31603
DF1 ASTM F738M, Class A4-70, Alloy 316 only, Condition CW Stainless Steel S31600
DF2 ASTM F738M, Class A4-70, Alloy 316L only, Condition CW Stainless Steel S31603
DF3 ASTM F738M, Class A4-80, Alloy 316 only, Condition SH Stainless Steel S31600
DF4 ASTM F738M, Class A4-80, Alloy 316L only, Condition SH Stainless Steel S31603
DF5 ASTM F738M, Class F1-45, Alloy 430 only, Condition AF Stainless Steel S43000
DF6 ASTM F738M, Class F1-45, Alloy 430F only, Condition AF Stainless Steel S43020
DF7 ASTM F738M, Class F1-60, Alloy 430 only, Condition CW Stainless Steel S43000
DF8 ASTM F738M, Class F1-60, Alloy 430F only, Condition CW Stainless Steel S43020
DF9 ASTM F738M, Class C4-50, Alloy 416 only, Condition A Stainless Steel S41600
DG0 ASTM F738M, Class C4-50, Alloy 416L only, Condition A Stainless Steel S41623
DG1 ASTM F738M, Class C4-70, Alloy 416 only, Condition H Stainless Steel S41600
DG2 ASTM F738M, Class C4-70, Alloy 416L only, Condition H Stainless Steel S41623
DG3 ASTM F738M, Class C4-110, Alloy 416 only, Condition HT Stainless Steel S41600
DG4 ASTM F738M, Class C4-110, Alloy 416L only, Condition HT Stainless Steel S41623
ASTM F835 – Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
DG5 ASTM F835, Quenched and Tempered Alloy Steel Alloy Steel —
ASTM F835M – Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
DG6 ASTM F835M, Quenched and Tempered Alloy Steel Alloy Steel —
ASTM F836M – Stainless Steel Metric Bolts, Screws, and Studs (Metric)
DG7 ASTM F836M, Class A1-50, Condition A Stainless Steel —
DG8 ASTM F836M, Class A1-50, Condition AF Stainless Steel —
DG9 ASTM F836M, Class A1-70, Condition CW Stainless Steel —
70
ASME B18.24-2015

NOTE:
DH0 ASTM F836M, Class A1-80, Condition SH Stainless Steel —
DH1 ASTM F836M, Class A2-50, Condition A Stainless Steel —
DH2 ASTM F836M, Class A2-50, Condition AF Stainless Steel —
DH3 ASTM F836M, Class A2-70, Condition CW Stainless Steel —
DH5 ASTM F836M, Class A4-50, Condition A Stainless Steel —
DH6 ASTM F836M, Class A4-50, Condition AF Stainless Steel —
DH7 ASTM F836M, Class A4-70, Condition CW Stainless Steel —
DH9 ASTM F836M, Class F1-45, Condition A Stainless Steel —
DJ0 ASTM F836M, Class F1-45, Condition AF Stainless Steel —
DJ1 ASTM F836M, Class C1-70, Condition H Stainless Steel S41000
DJ2 ASTM F836M, Class C1-110, Condition HT Stainless Steel S41000
DJ3 ASTM F836M, Class C3-80, Condition H Stainless Steel S43100
DJ4 ASTM F836M, Class C3-120, Condition HT Stainless Steel S43100
DJ5 ASTM F836M, Class C4-70, Condition H Stainless Steel —
DJ6 ASTM F836M, Class C4-110, Condition HT Stainless Steel —
DJ7 ASTM F836M, Class P1-90, Condition AH Stainless Steel S17400
DJ8 ASTM F836M, Class A1-50, Alloy 303 only, Condition A Stainless Steel S30300
DJ9 ASTM F836M, Class A1-50, Alloy 303 only, Condition AF Stainless Steel S30300
DK0 ASTM F836M, Class A1-50, Alloy 303Se only, Condition A Stainless Steel S30323
DK1 ASTM F836M, Class A1-50, Alloy 303Se only, Condition AF Stainless Steel S30323
DK2 ASTM F836M, Class A1-50, Alloy 304 only, Condition A Stainless Steel S30400
DK3 ASTM F836M, Class A1-50, Alloy 304 only, Condition AF Stainless Steel S30400
DK4 ASTM F836M, Class A1-50, Alloy 304L only, Condition A Stainless Steel S30403
DK5 ASTM F836M, Class A1-50, Alloy 304L only, Condition AF Stainless Steel S30403
DL0 ASTM F836M, Class A1-50, Alloy XM1 only, Condition A Stainless Steel S20300
71
ASME B18.24-2015

NOTE:
DL1 ASTM F836M, Class A1-50, Alloy XM1 only, Condition AF Stainless Steel S20300
DL2 ASTM F836M, Class A1-50, Alloy 302HQ (XM7) only, Condition A Stainless Steel S30433
DL3 ASTM F836M, Class A1-50, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
DL4 ASTM F836M, Class A1-50, Alloy 18-9LW only, Condition A Stainless Steel S30430
DL5 ASTM F836M, Class A1-50, Alloy 18-9LW only, Condition AF Stainless Steel S30430
DL6 ASTM F836M, Class A1-70, Alloy 303 only, Condition CW Stainless Steel S30300
DL7 ASTM F836M, Class A1-70, Alloy 303Se only, Condition CW Stainless Steel S30323
DL8 ASTM F836M, Class A1-70, Alloy 304 only, Condition CW Stainless Steel S30400
DL9 ASTM F836M, Class A1-70, Alloy 304L only, Condition CW Stainless Steel S30403
DM0 ASTM F836M, Class A1-70, Alloy 305 only, Condition CW Stainless Steel S30500
DM1 ASTM F836M, Class A1-70, Alloy 384 only, Condition CW Stainless Steel S38400
DM2 ASTM F836M, Class A1-70, Alloy XM1 only, Condition CW Stainless Steel S20300
DM3 ASTM F836M, Class A1-70, Alloy 18-9LW only, Condition CW Stainless Steel S30430
DM4 ASTM F836M, Class A1-70, Alloy 302HQ (XM7) only, Condition CW Stainless Steel S30433
DM5 ASTM F836M, Class A1-80, Alloy 303 only, Condition SH Stainless Steel S30300
DM6 ASTM F836M, Class A1-80, Alloy 303Se only, Condition SH Stainless Steel S30323
DM8 ASTM F836M, Class A1-80, Alloy 304L only, Condition SH Stainless Steel S30403
DN0 ASTM F836M, Class A1-80, Alloy 384 only, Condition SH Stainless Steel S38400
DN1 ASTM F836M, Class A1-80, Alloy XM1 only, Condition SH Stainless Steel S20300
DN2 ASTM F836M, Class A1-80, Alloy 302HQ (XM7) only, Condition SH Stainless Steel S30433
DN3 ASTM F836M, Class A1-80, Alloy 18-9LW only, Condition SH Stainless Steel S30430
DN4 ASTM F836M, Class A4-50, Alloy 316 only, Condition A Stainless Steel S31600
DN5 ASTM F836M, Class A4-50, Alloy 316 only, Condition AF Stainless Steel S31600
DN6 ASTM F836M, Class A4-50, Alloy 316L only, Condition A Stainless Steel S31603
DN7 ASTM F836M, Class A4-50, Alloy 316L only, Condition AF Stainless Steel S31603
DN8 ASTM F836M, Class A4-70, Alloy 316 only, Condition CW Stainless Steel S31600
DN9 ASTM F836M, Class A4-70, Alloy 316L only, Condition CW Stainless Steel S31603
DP0 ASTM F836M, Class A4-80, Alloy 316 only, Condition SH Stainless Steel S31600
DP1 ASTM F836M, Class A4-80, Alloy 316L only, Condition SH Stainless Steel S31603
72
ASME B18.24-2015

NOTE:
DP2 ASTM F836M, Class A2-50, Alloy 321 only, Condition A Stainless Steel S30400
DP3 ASTM F836M, Class A2-50, Alloy 321 only, Condition AF Stainless Steel S30400
DP4 ASTM F836M, Class A2-50, Alloy 347 only, Condition A Stainless Steel S30403
DP5 ASTM F836M, Class A2-50, Alloy 347 only, Condition AF Stainless Steel S30403
DP6 ASTM F836M, Class A2-70, Alloy 321 only, Condition CW Stainless Steel S30500
DP7 ASTM F836M, Class A2-70, Alloy 347 only, Condition CW Stainless Steel S38400
DQ0 ASTM F836M, Class F1-45, Alloy 430 only, Condition A Stainless Steel S43000
DQ1 ASTM F836M, Class F1-45, Alloy 430 only, Condition AF Stainless Steel S43000
DQ2 ASTM F836M, Class F1-45, Alloy 430F only, Condition A Stainless Steel S43020
DQ3 ASTM F836M, Class F1-45, Alloy 430F only, Condition AF Stainless Steel S43020
DQ4 ASTM F836M, Class C4-70, Alloy 416 only, Condition A Stainless Steel S41600
DQ5 ASTM F836M, Class C4-70, Alloy 416 only, Condition H Stainless Steel S41600
DQ6 ASTM F836M, Class C4-70, Alloy 416L only, Condition A Stainless Steel S41623
DQ7 ASTM F836M, Class C4-70, Alloy 416L only, Condition H Stainless Steel S41623
DQ8 ASTM F836M, Class C4-110, Alloy 416 only, Condition HT Stainless Steel S41600
DQ9 ASTM F836M, Class C4-110, Alloy 416L only, Condition HT Stainless Steel S41623
ASTM F837 – Stainless Steel Socket Head Cap Screws
DR0 ASTM F837, Alloy Group 1 AF Stainless Steel —
DR1 ASTM F837, Alloy Group 1 AF, apply Supplementary Reqt. S7 Stainless Steel —
DR2 ASTM F837, Alloy Group 1 CW Stainless Steel —
DR3 ASTM F837, Alloy Group 1 CW, apply Supplementary Reqt. S7 Stainless Steel —
DR4 ASTM F837, Alloy Group 1 CW1 Stainless Steel —
DR5 ASTM F837, Alloy Group 1 CW1, apply Supplementary Reqt. S7 Stainless Steel —
DR6 ASTM F837, Alloy Group 5 HT Stainless Steel S41000
DR7 ASTM F837, Alloy Group 5 HT, apply Supplementary Reqt. S7 Stainless Steel S41000
DR8 ASTM F837, Alloy 303 only, Condition AF Stainless Steel S30300
DR9 ASTM F837, Alloy 303 only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S30300
DS0 ASTM F837, Alloy 303 only, Condition CW Stainless Steel S30300
73
ASME B18.24-2015

NOTE:
ASTM F837 – Stainless Steel Socket Head Cap Screws (Cont’d)
DS1 ASTM F837, Alloy 303 only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S30300
DS2 ASTM F837, Alloy 303 only, Condition CW1 Stainless Steel S30300
DS3 ASTM F837, Alloy 303 only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S30300
DS4 ASTM F837, Alloy 304 only, Condition AF Stainless Steel S30400
DS5 ASTM F837, Alloy 304 only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S30400
DS6 ASTM F837, Alloy 304 only, Condition CW Stainless Steel S30400
DS7 ASTM F837, Alloy 304 only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S30400
DS8 ASTM F837, Alloy 304 only, Condition CW1 Stainless Steel S30400
DS9 ASTM F837, Alloy 304 only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S30400
DT0 ASTM F837, Alloy 304L only, Condition AF Stainless Steel S30403
DT1 ASTM F837, Alloy 304L only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S30403
DT2 ASTM F837, Alloy 304L only, Condition CW Stainless Steel S30403
DT3 ASTM F837, Alloy 304L only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S30403
DT4 ASTM F837, Alloy 304L only, Condition CW1 Stainless Steel S30403
DT5 ASTM F837, Alloy 304L only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S30403
DT6 ASTM F837, Alloy 305 only, Condition AF Stainless Steel S30500
DT7 ASTM F837, Alloy 305 only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S30500
DT8 ASTM F837, Alloy 305 only, Condition CW Stainless Steel S30500
DT9 ASTM F837, Alloy 305 only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S30500
DU0 ASTM F837, Alloy 305 only, Condition CW1 Stainless Steel S30500
DU1 ASTM F837, Alloy 305 only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S30500
DU2 ASTM F837, Alloy 384 only, Condition AF Stainless Steel S38400
DU3 ASTM F837, Alloy 384 only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S38400
DU4 ASTM F837, Alloy 384 only, Condition CW Stainless Steel S38400
DU5 ASTM F837, Alloy 384 only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S38400
DU6 ASTM F837, Alloy 384 only, Condition CW1 Stainless Steel S38400
DU7 ASTM F837, Alloy 384 only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S38400
DU8 ASTM F837, Alloy XM1 only, Condition AF Stainless Steel S20300
DU9 ASTM F837, Alloy XM1 only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S20300
DV0 ASTM F837, Alloy XM1 only, Condition CW Stainless Steel S20300
DV1 ASTM F837, Alloy XM1 only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S20300
74
ASME B18.24-2015

NOTE:
ASTM F837 – Stainless Steel Socket Head Cap Screws (Cont’d)
DV2 ASTM F837, Alloy XM1 only, Condition CW1 Stainless Steel S20300
DV3 ASTM F837, Alloy XM1 only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S20300
DV4 ASTM F837, Alloy 18-9LW only, Condition AF Stainless Steel S30430
DV5 ASTM F837, Alloy 18-9LW only, Condition AF, apply Supplementary Reqt S7 Stainless Steel S30430
DV6 ASTM F837, Alloy 18-9LW only, Condition CW Stainless Steel S30430
DV7 ASTM F837, Alloy 18-9LW only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S30430
DV8 ASTM F837, Alloy 18-9LW only, Condition CW1 Stainless Steel S30430
DV9 ASTM F837, Alloy 18-9LW only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S30430
DW0 ASTM F837, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
DW1 ASTM F837, Alloy 302HQ (XM7) only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S30433
DW2 ASTM F837, Alloy 302HQ (XM7) only, Condition ACW Stainless Steel S30433
DW3 ASTM F837, Alloy 302HQ (XM7) only, Condition ACW, apply Supplementary Reqt. S7 Stainless Steel S30434
DW4 ASTM F837, Alloy 302HQ (XM7) only, Condition ACW1 Stainless Steel S30435
DW5 ASTM F837, Alloy 302HQ (XM7) only, Condition ACW1, apply Supplementary Reqt. S7 Stainless Steel S30436
DW6 ASTM F837, Alloy 316 only, Condition AF Stainless Steel S31600
DW7 ASTM F837, Alloy 316 only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S31600
DW8 ASTM F837, Alloy 316 only, Condition CW Stainless Steel S31600
DW9 ASTM F837, Alloy 316 only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S31600
DX0 ASTM F837, Alloy 316 only, Condition CW1 Stainless Steel S31600
DX1 ASTM F837, Alloy 316 only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S31600
DX2 ASTM F837, Alloy 316L only, Condition AF Stainless Steel S31603
DX3 ASTM F837, Alloy 316L only, Condition AF, apply Supplementary Reqt. S7 Stainless Steel S31603
DX4 ASTM F837, Alloy 316L only, Condition CW Stainless Steel S31603
DX5 ASTM F837, Alloy 316L only, Condition CW, apply Supplementary Reqt. S7 Stainless Steel S31603
DX6 ASTM F837, Alloy 316L only, Condition CW1 Stainless Steel S31603
DX7 ASTM F837, Alloy 316L only, Condition CW1, apply Supplementary Reqt. S7 Stainless Steel S31603
ASTM F837M – Stainless Steel Socket Head Cap Screws (Metric)
DX8 ASTM F837M, Class A1-50, Annealed Stainless Steel —
DX9 ASTM F837M, Class A1-70, Cold Worked Stainless Steel —
DY0 ASTM F837M, Class C1-110 Stainless Steel S41000
DY1 ASTM F837M, Class A1-50, Alloy 303 only, Annealed Stainless Steel S30300
75
ASME B18.24-2015

NOTE:
ASTM F837M – Stainless Steel Socket Head Cap Screws (Metric) (Cont’d)
DY3 ASTM F837M, Class A1-50, Alloy 304L only, Annealed Stainless Steel S30403
DY6 ASTM F837M, Class A1-50, Alloy XM1 only, Annealed Stainless Steel S20300
DY7 ASTM F837M, Class A1-50, Alloy 18-9LW only, Annealed Stainless Steel S30430
DY8 ASTM F837M, Class A1-50, Alloy 302HQ (XM7) only, Annealed Stainless Steel S30433
DZ0 ASTM F837M, Class A1-50, Alloy 316L only, Annealed Stainless Steel S31603
DZ1 ASTM F837M, Class A1-70, Alloy 303 only, Cold Worked Stainless Steel S30300
DZ3 ASTM F837M, Class A1-70, Alloy 304L only, Cold Worked Stainless Steel S30403
DZ6 ASTM F837M, Class A1-70, Alloy XM1 only, Cold Worked Stainless Steel S20300
DZ7 ASTM F837M, Class A1-70, Alloy 18-9LW only, Cold Worked Stainless Steel S30430
DZ8 ASTM F837M, Class A1-70, Alloy 302HQ (XM7) only, Cold Worked Stainless Steel S30433
DA0 ASTM F837M, Class A1-70, Alloy 316L only, Cold Worked Stainless Steel S31603
ASTM F844 – Washers, Steel, Plain (Flat), Unhardened for General Use
EA1 ASTM F844, Carbon Steel, UNS G10050, -060, -080, -090, 10100, -110, -120, Carbon Steel —
-130, -150
ASTM F879 – Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
EA2 ASTM F879, Alloy Group 1, Condition AF Stainless Steel —
EA3 ASTM F879, Alloy Group 1, Condition CW Stainless Steel —
EA4 ASTM F879, Alloy 304 only, Condition AF Stainless Steel S30400
EA5 ASTM F879, Alloy 304 only, Condition CW Stainless Steel S30400
EA6 ASTM F879, Alloy 304L only, Condition AF Stainless Steel S30403
EA7 ASTM F879, Alloy 304L only, Condition CW Stainless Steel S30403
76
ASME B18.24-2015

NOTE:
ASTM F879 – Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Cont’d)
EA8 ASTM F879, Alloy 305 only, Condition AF Stainless Steel S30500
EA9 ASTM F879, Alloy 305 only, Condition CW Stainless Steel S30500
EB0 ASTM F879, Alloy 384 only, Condition AF Stainless Steel S38400
EB1 ASTM F879, Alloy 384 only, Condition CW Stainless Steel S38400
EB2 ASTM F879, Alloy 18-9LW only, Condition AF Stainless Steel S30430
EB3 ASTM F879, Alloy 18-9LW only, Condition CW Stainless Steel S30430
EB4 ASTM F879, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
EB5 ASTM F879, Alloy 302HQ (XM7) only, Condition CW Stainless Steel S30433
EB6 ASTM F879, Alloy 316 only, Condition AF Stainless Steel S31600
EB7 ASTM F879, Alloy 316 only, Condition CW Stainless Steel S31600
EB8 ASTM F879, Alloy 316L only, Condition AF Stainless Steel S31603
EB9 ASTM F879, Alloy 316L only, Condition CW Stainless Steel S31603
ASTM F879M – Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
EC0 ASTM F879M, Class A1-50, Annealed Stainless Steel —
EC1 ASTM F879M, Class A1-70, Cold Worked Stainless Steel —
EC2 ASTM F879M, Class A1-50, Alloy 304 only, Annealed Stainless Steel S30400
EC3 ASTM F879M, Class A1-50, Alloy 304L only, Annealed Stainless Steel S30403
EC6 ASTM F879M, Class A1-50, Alloy 18-9LW only, Annealed Stainless Steel S30430
EC7 ASTM F879M, Class A1-50, Alloy 302HQ (XM7) only, Annealed Stainless Steel S30433
EC9 ASTM F879M, Class A1-50, Alloy 316L only, Annealed Stainless Steel S31603
ED0 ASTM F879M, Class A1-70, Alloy 304 only, Cold Worked Stainless Steel S30400
ED1 ASTM F879M, Class A1-70, Alloy 304L only, Cold Worked Stainless Steel S30403
ED4 ASTM F879M, Class A1-70, Alloy 18-9LW only, Cold Worked Stainless Steel S30430
ED5 ASTM F879M, Class A1-70, Alloy 302HQ (XM7) only, Cold Worked Stainless Steel S30433
77
ASME B18.24-2015

NOTE:
ASTM F879M – Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Cont’d)
ED7 ASTM F879M, Class A1-70, Alloy 316L only, Cold Worked Stainless Steel S31603
ASTM F880 – Stainless Steel Socket-Set Screws
ED8 ASTM F880, Alloy Group 1, Condition AF Stainless Steel —
ED9 ASTM F880, Alloy Group 1, Condition CW Stainless Steel —
EE0 ASTM F880, Alloy 303 only, Condition AF Stainless Steel S30300
EE1 ASTM F880, Alloy 303 only, Condition CW Stainless Steel S30300
EE2 ASTM F880, Alloy 303Se only, Condition AF Stainless Steel S30323
EE3 ASTM F880, Alloy 303Se only, Condition CW Stainless Steel S30323
EE6 ASTM F880, Alloy 304L only, Condition AF Stainless Steel S30403
EE7 ASTM F880, Alloy 304L only, Condition CW Stainless Steel S30403
EF0 ASTM F880, Alloy 384 only, Condition AF Stainless Steel S38400
EF1 ASTM F880, Alloy 384 only, Condition CW Stainless Steel S38400
EF2 ASTM F880, Alloy XM1 only, Condition AF Stainless Steel S20300
EF3 ASTM F880, Alloy XM1 only, Condition CW Stainless Steel S20300
EF4 ASTM F880, Alloy 18-9LW only, Condition AF Stainless Steel S30430
EF5 ASTM F880, Alloy 18-9LW only, Condition CW Stainless Steel S30430
EF6 ASTM F880, Alloy 302HQ (XM7) only, Condition AF Stainless Steel S30433
EF7 ASTM F880, Alloy 302HQ (XM7) only, Condition CW Stainless Steel S30433
ASTM F880M – Stainless Steel Socket-Set Screws (Metric)
EF8 ASTM F880M, Class A1-50 Stainless Steel —
EF9 ASTM F880M, Class A1-70 Stainless Steel —
EG0 ASTM F880M, Class A1-50, Alloy 303 only, Annealed Stainless Steel S30300
EG1 ASTM F880M, Class A1-50, Alloy 303Se only, Annealed Stainless Steel S30323
EG3 ASTM F880M, Class A1-50, Alloy 304L only, Annealed Stainless Steel S30403
78
ASME B18.24-2015

NOTE:
ASTM F880M – Stainless Steel Socket-Set Screws (Metric) (Cont’d)
EG6 ASTM F880M, Class A1-50, Alloy XM1 only, Annealed Stainless Steel S20300
EG7 ASTM F880M, Class A1-50, Alloy 18-9LW only, Annealed Stainless Steel S30430
EG8 ASTM F880M, Class A1-50, Alloy 302HQ (XM7) only, Annealed Stainless Steel S30430
EG9 ASTM F880M, Class A1-70, Alloy 303 only, Cold Worked Stainless Steel S30300
EH0 ASTM F880M, Class A1-70, Alloy 303Se only, Cold Worked Stainless Steel S30323
EH1 ASTM F880M, Class A1-70, Alloy 304 only, Cold Worked Stainless Steel S30400
EH2 ASTM F880M, Class A1-70, Alloy 304L only, Cold Worked Stainless Steel S30403
EH5 ASTM F880M, Class A1-70, Alloy XM1 only, Cold Worked Stainless Steel S20300
EH6 ASTM F880M, Class A1-70, Alloy 18-9LW only, Cold Worked Stainless Steel S30430
EH7 ASTM F880M, Class A1-70, Alloy 302HQ (XM7) only, Cold Worked Stainless Steel S30430
ASTM F901 – Aluminum Transmission Tower Bolts and Nuts
EH8 ASTM F901, Alloy 2024 Aluminum Alloy —
EH9 ASTM F901, Alloy 6061 Aluminum Alloy —
EJ0 ASTM F901, Alloy 6262 Aluminum Alloy —
ASTM F912 – Alloy Steel Socket Set Screws
EJ1 ASTM F912 Alloy Steel —
ASTM F912M – Alloy Steel Socket Set Screws (Metric)
EJ2 ASTM F912M Alloy Steel —
ASTM F959 – Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
EJ3 ASTM F959, Type 325 Carbon Steel —
EJ4 ASTM F959, Type 490 Carbon Steel —
79
ASME B18.24-2015

NOTE:
ASTM F959M – Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners (Metric)
EJ5 ASTM F959M, Type 8.8 Carbon Steel —
EJ6 ASTM F959M, Type 10.9 Carbon Steel —
ASTM F1852 – Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated,
120/105 ksi Minimum Tensile Strength
EQ1 ASTM F1852, Type I, Plain Carbon, Carbon Boron or Alloy Steel Steel —
EQ2 ASTM F1852, Type 3, Weathering Steel Steel —
ASTM F2280 – Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated,
150 ksi Minimum Tensile Strength
EQ3 ASTM F2280, Type I, Alloy Steel Alloy Steel —
EQ4 ASTM F2280, Type 3, Weathering Steel Steel —
ASTM F2281 – Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
EJ7 ASTM F2281, Type I, Class A - Austenitic, Grade 304, Condition A Stainless Steel S30400
EJ8 ASTM F2281, Type I, Class A - Austenitic, Grade 304, Condition CWA Stainless Steel S30400
EJ9 ASTM F2281, Type I, Class A - Austenitic, Grade 304, Condition HWA Stainless Steel S30400
EK0 ASTM F2281, Type I, Class A - Austenitic, Grade 304L, Condition A Stainless Steel S30403
EK1 ASTM F2281, Type I, Class A - Austenitic, Grade 304L, Condition CWA Stainless Steel S30403
EK2 ASTM F2281, Type I, Class A - Austenitic, Grade 304L, Condition HWA Stainless Steel S30403
EK3 ASTM F2281, Type I, Class A - Austenitic, Grade 316, Condition A Stainless Steel S31600
EK4 ASTM F2281, Type I, Class A - Austenitic, Grade 316, Condition CWA Stainless Steel S31600
EK5 ASTM F2281, Type I, Class A - Austenitic, Grade 316, Condition HWA Stainless Steel S31600
EK6 ASTM F2281, Type I, Class A - Austenitic, Grade 316L, Condition A Stainless Steel S31603
EK7 ASTM F2281, Type I, Class A - Austenitic, Grade 316L, Condition CWA Stainless Steel S31603
EK8 ASTM F2281, Type I, Class A - Austenitic, Grade 316L, Condition HWA Stainless Steel S31603
EK9 ASTM F2281, Type I, Class B - Martensitic, Grade 410, Condition H Stainless Steel S41000
EL0 ASTM F2281, Type I, Class B - Martensitic, Grade 410, Condition HT Stainless Steel S41000
EL1 ASTM F2281, Type I, Class B - Martensitic, Grade 416, Condition H Stainless Steel S41600
EL3 ASTM F2281, Type I, Class B - Martensitic, Grade 431, Condition H Stainless Steel S43100
EL5 ASTM F2281, Type I, Class C - Ferritic, Grade 430, Condition A Stainless Steel S43000
80
ASME B18.24-2015

NOTE:
ASTM F2281 – Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
(Cont’d)
EL6 ASTM F2281, Type I, Class C - Ferritic, Grade 430, Condition CWA Stainless Steel S43000
EL7 ASTM F2281, Type I, Class C - Ferritic, Grade 430, Condition HWA Stainless Steel S43000
EL8 ASTM F2281, Type I, Class C - Ferritic, Grade 430F, Condition A Stainless Steel S43020
EL9 ASTM F2281, Type I, Class C - Ferritic, Grade 430F, Condition CWA Stainless Steel S43020
EM0 ASTM F2281, Type I, Class C - Ferritic, Grade 430F, Condition HWA Stainless Steel S43020
EM1 ASTM F2281, Type II - Heat Resisting, Grade 309, Condition A Heat Resisting Steel S30900
EM2 ASTM F2281, Type II - Heat Resisting, Grade 309, Condition CWA Heat Resisting Steel S30900
EM3 ASTM F2281, Type II - Heat Resisting, Grade 309, Condition HWA Heat Resisting Steel S30900
EM4 ASTM F2281, Type II - Heat Resisting, Grade 310, Condition A Heat Resisting Steel S31000
EM5 ASTM F2281, Type II - Heat Resisting, Grade 310, Condition CWA Heat Resisting Steel S31000
EM6 ASTM F2281, Type II - Heat Resisting, Grade 310, Condition HWA Heat Resisting Steel S31000
EM7 ASTM F2281, Type II - Heat Resisting, Grade 321, Condition A Stainless Steel S32100
EM8 ASTM F2281, Type II - Heat Resisting, Grade 321, Condition CWA Stainless Steel S32100
EM9 ASTM F2281, Type II - Heat Resisting, Grade 321, Condition HWA Stainless Steel S32100
EN0 ASTM F2281, Type II - Heat Resisting, Grade 330, Condition A Nickel Alloy N08300
EN1 ASTM F2281, Type II - Heat Resisting, Grade 330, Condition CWA Nickel Alloy N08330
EN2 ASTM F2281, Type II - Heat Resisting, Grade 330, Condition HWA Nickel Alloy N08330
EN3 ASTM F2281, Type II - Heat Resisting, Grade 347, Condition A Stainless Steel S34700
EN4 ASTM F2281, Type II - Heat Resisting, Grade 347, Condition CWA Stainless Steel S34700
EN5 ASTM F2281, Type II - Heat Resisting, Grade 347, Condition HWA Stainless Steel S34700
EN6 ASTM F2281, Type III, Class A - Nickel Based Alloy, Grade 600, Condition A Nickel Alloy N06600
EN7 ASTM F2281, Type III, Class A - Nickel Based Alloy, Grade 600, Condition CWA Nickel Alloy N06600
EN8 ASTM F2281, Type III, Class A - Nickel Based Alloy, Grade 600, Condition HWA Nickel Alloy N06600
EN9 ASTM F2281, Type III, Class A - Nickel Based Alloy, Grade 601, Condition A Nickel Alloy N06601
EP0 ASTM F2281, Type III, Class A - Nickel Based Alloy, Grade 601, Condition CWA Nickel Alloy N06601
EP1 ASTM F2281, Type III, Class A - Nickel Based Alloy, Grade 601, Condition HWA Nickel Alloy N06601
EP2 ASTM F2281, Type III, Class B - Precipitation Hardened, Grade 660, Condition AH1 Iron Base Superalloy S66286
(A286)
(A286)
(A286)
EP5 ASTM F2281, Type III, Class C - Precipitation Hardened, Grade 718, Condition AH4 Nickel Alloy N07718
81
ASME B18.24-2015
Table 5-2 Material and Treatment: UNS Carbon and Alloy Steels
PIN Material Spec Material
GA1 1005, G10050 Carbon Steel
GB0 1016, G10160 Carbon Steel
GC0 1029, G10290 Carbon Steel
GD0 1043, G10430 Carbon Steel
82
ASME B18.24-2015
Table 5-2 Material and Treatment: UNS Carbon and Alloy Steels (Cont’d)
GE0 1064, G10640 Carbon Steel
GF0 1086, G10860 Carbon Steel
GF3 UNS G10080, -090, 10100, -110, -120, -130, -140, -160, -170, -180, or -190 Carbon Steel
GF4 UNS G10300, G10350, G10380, or G15410 Carbon Steel
GF5 UNS G10700, -740, -750, -780, 10800, -840, -850, -860, 10900, or 10950 Carbon Steel
GF6 UNS G10600, 640, -650, -690, 10700, -740, -750, -780, 10800, -840, -850, Carbon Steel
-860, or G10900
GF7 1108, G11080 Resulfurized Carbon Steel
GG0 1113, G11160 Resulfurized Carbon Steel
83
ASME B18.24-2015
GG7 11374, G11374 Steel, Free Machining
GH0 1141, G11410 Resulfurized Carbon Steel
GH5 1211, G12110 Rephosphorized and Resulfurized Carbon Steel
GH8 12L13, G12134 Rephosphorized, Resulfurized, and Leaded

Carbon Steel
GH9 12L14, G12144 Rephosphorized and Resulfurized Carbon Steel
GJ0 1215, G12150 Rephosphorized and Resulfurized Carbon Steel
GJ1 UNS G10140, G10200, G10220, G11170, or G11180 Carbon Steel
GJ2 UNS G10300, G10400, G10500, G10600, G10800, or G11440 Carbon Steel
GJ3 1513, G15130 Carbon Steel
GK0 1533, G15330 Carbon Steel
84
ASME B18.24-2015
GL0 1566, G15660 Carbon Steel
GL5 UNS G10060, G10080, or G10100 Carbon Steel
GL6 UNS G10120, G10140, G10170, or G10200 Carbon Steel
GL7 UNS G10160, G10180, G10210, G10220, or G10260 Carbon Steel
GL8 UNS G10230 or G10250 Carbon Steel
GL9 UNS G10290, G10300, G10350, G10370, G10380, or G10390 Carbon Steel
GM0 UNS G10555, G10600, G10700, G10800, G10840, or G10850 Carbon Steel
GM1 UNS G10780 or G10950 Carbon Steel
GM2 UNS G12110, G12120, or G12130 Carbon Steel
GM3 UNS G11080 or G11090 Carbon Steel
GM4 UNS G11160, G11170, G11180, or G11190 Carbon Steel
GM7 Any UNS Carbon Steel Carbon Steel
GN1 1330, G13300 Mn Alloy Steel
GN5 4012, G40120 Mo Alloy Steel
GP0 4032, G40320 Mo Alloy Steel
GP4 4113, G41180 Cr-Mo Alloy Steel
85
ASME B18.24-2015
GQ0 4145, G41450 Cr-Mo Alloy Steel
GQ4 4320, G43200 Ni-Cr-Mo Alloy Steel
GQ5 4340, G43400 Ni-Cr-Mo Alloy Steel
GQ6 E4340, G43406 Ni-Cr-Mo Alloy Steel
GQ7 4419, G44190 Mo Alloy Steel
GR0 4615, G46150 Ni-Mo Alloy Steel
GR5 4718, G47180 Ni-Cr-Mo Alloy Steel
GR6 4720, G47200 Ni-Cr-Mo Alloy Steel
GS0 5015, G50150 Cr Alloy Steel
GS1 50B40, G50401 Cr-B Alloy Steel
86
ASME B18.24-2015
GT0 5120, G51200 Cr Alloy Steel
GU0 51B60, G51601 Cr-B Alloy Steel
GU1 50100, G50986 Cr Alloy Steel
GU4 6118, G61180 Cr-V Alloy Steel
GU5 6150, G61500 Cr-V Alloy Steel
GU6 8115, G81150 Ni-Cr-Mo Alloy Steel
GU7 81B45, G81451 Ni-Cr-Mo-B Alloy Steel
GV0 8620, G86200 Ni-Cr-Mo Alloy Steel
GV9 86B45, G86451 Ni-Cr-Mo-B Alloy Steel
GW0 8650, G86500 Ni-Cr-Mo Alloy Steel
87
ASME B18.24-2015
GW6 9254, G92540 Cr-Si Alloy Steel
GW7 9255, G92550 Si-Mn Alloy Steel
GW8 9260, G92600 Si-Mn Alloy Steel
GX0 94B15, G94151 Ni-Cr-Mo-B Alloy Steel
GX1 94B17, G94171 Ni-Cr-Mo-B Alloy Steel
GX2 94830, G94301 Ni-Cr-Mo-B Alloy Steel
GX3 6150H, H61500 Cr-V H-Alloy Steel
GX4 UNS G41300, G41400, G43400 Alloy Steel
GX5 UNS G41300, G43400, G86370, G86400 Alloy Steel
GX6 UNS G41300, G43400, G86370, G86400, G87400 Alloy Steel
GX7 B21, K14073 Alloy Steel
GX8 B24, K24064 Alloy Steel
GX9 B24V, K24070 Alloy Steel
GY0 Any Alloy Steel Alloy Steel
Table 5-3 Material and Treatment: UNS Heat and Corrosion Resisting Steels
SA1 201, S20100, Annealed Austenitic Cr-Mn-Ni Stainless Steel
SA2 201, S20100, Cold Worked Austenitic Cr-Mn-Ni Stainless Steel
SA3 202, S20200, Annealed Austenitic Cr-Mn-Ni Stainless Steel
SA4 202, S20200, Cold Worked Austenitic Cr-Mn-Ni Stainless Steel
SA5 203, S20300, Annealed Austenitic Cr-Mn-Ni-Cu Free Machining Stainless Steel (203 EZ)
SA6 203, S20300, Cold Worked Austenitic Cr-Mn-Ni-Cu Free Machining Stainless Steel (203 EZ)
SA7 301, S30100, Annealed Austenitic Cr-Ni Stainless Steel
SA8 301, S30100, Cold Worked Austenitic Cr-Ni Stainless Steel
SA9 302, S30200, Annealed Austenitic Cr-Ni Stainless Steel
SB0 302, S30200, Cold Worked Austenitic Cr-Ni Stainless Steel
SB1 302B, S30215, Annealed Austenitic Cr-Ni Stainless Steel
SB2 302B, S30215, Cold Worked Austenitic Cr-Ni Stainless Steel
88
ASME B18.24-2015
Table 5-3 Material and Treatment: UNS Heat and Corrosion Resisting Steels (Cont’d)
SB3 303, S30300, Annealed Free Machining Austenitic Cr-Ni Stainless Steel
SB4 303, S30300, Cold Worked Free Machining Austenitic Cr-Ni Stainless Steel
SB5 303Se, S30323, Annealed Free Machining Austenitic Cr-Ni Stainless Steel (Se Bearing)
SB6 303Se, S30323, Cold Worked Free Machining Austenitic Cr-Ni Stainless Steel (Se Bearing)
SB7 304, S30400, Annealed Austenitic Cr-Ni Stainless Steel
SB8 304, S30400, Cold Worked Austenitic Cr-Ni Stainless Steel
SB9 304H, S30409, Annealed Austenitic Cr-Ni Stainless Steel, High Carbon (304 H)
SC0 304H, S30409, Cold Worked Austenitic Cr-Ni Stainless Steel, High Carbon (304 H)
SC1 304L, S30403, Annealed Austenitic Cr-Ni Stainless Steel (Low Carbon)
SC2 304L, S30403, Cold Worked Austenitic Cr-Ni Stainless Steel (Low Carbon)
SC3 304LN, S30453, Annealed Austenitic Nitrogen Bearing Cr-Ni Stainless Steel (304 LN)
SC4 304LN, S30453, Cold Worked Austenitic Nitrogen Bearing Cr-Ni Stainless Steel (304 LN)
SC5 30430, S30430, Annealed Austenitic Cr-Ni-Cu Low Work Hardening Stainless Steel (18-9-LW)
SC6 30430, S30430, Cold Worked Austenitic Cr-Ni-Cu Low Work Hardening Stainless Steel (18-9-LW)
SC7 304N, S30451, Annealed Austenitic Nitrogen Bearing Cr-Ni Stainless Steel (304 N)
SC8 304N, S30451, Cold Worked Austenitic Nitrogen Bearing Cr-Ni Stainless Steel (304 N)
SC9 305, S30500, Annealed Austenitic Nitrogen Bearing Cr-Ni Stainless Steel (Low Work
Hardening)
SD0 305, S30500, Cold Worked Austenitic Nitrogen Bearing Cr-Ni Stainless Steel (Low Work
Hardening)
SD1 308, S30800, Annealed Austenitic Cr-Ni Heat Resisting Steel
SD2 308, S30800, Cold Worked Austenitic Cr-Ni Heat Resisting Steel
SD5 309S, S30908, Annealed Austenitic Cr-Ni Heat Resisting Stainless Steel (309 S)
SD6 309S, S30908, Cold Worked Austenitic Cr-Ni Heat Resisting Stainless Steel (309 S)
SD9 310S, S31008, Annealed Austenitic Cr-Ni Heat Resisting Steel (310 S)
SE0 310S, S31008, Cold Worked Austenitic Cr-Ni Heat Resisting Steel (310 S)
SE1 314, S31400, Annealed Austenitic Cr-Ni Heat Resisting Steel
SE2 314, S31400, Cold Worked Austenitic Cr-Ni Heat Resisting Steel
SE3 316, S31600, Annealed Austenitic Cr-Ni-Mo Stainless Steel
SE4 316, S31600, Cold Worked Austenitic Cr-Ni-Mo Stainless Steel
SE5 316F, S31620, Annealed Austenitic Cr-Ni-Mo Free Machining Stainless Steel
89
ASME B18.24-2015
SE6 316F, S31620, Cold Worked Austenitic Cr-Ni-Mo Free Machining Stainless Steel
SE7 316H, S31609, Annealed Austenitic Cr-Ni-Mo Stainless Steel (High Carbon)
SE8 316H, S31609, Cold Worked Austenitic Cr-Ni-Mo Stainless Steel (High Carbon)
SE9 316L, S31603, Annealed Austenitic Cr-Ni-Mo Stainless Steel (Low Carbon)
SF0 316L, S31603, Cold Worked Austenitic Cr-Ni-Mo Stainless Steel (Low Carbon)
SF1 316N, S31651, Annealed Austenitic Nitrogen Bearing Cr-Ni-Mo Stainless Steel (316 N)
SF2 316N, S31651, Cold Worked Austenitic Nitrogen Bearing Cr-Ni-Mo Stainless Steel (316 N)
SF3 316LN, S31653, Annealed Austenitic Nitrogen Bearing Cr-Ni-Mo Stainless Steel (316LN)
SF4 316LN, S31653, Cold Worked Austenitic Nitrogen Bearing Cr-Ni-Mo Stainless Steel (316LN)
SF5 317, S31700, Annealed Austenitic Cr-Ni-Mo Stainless Steel
SF6 317, S31700, Cold Worked Austenitic Cr-Ni-Mo Stainless Steel
SF7 317L, S31703, Annealed Austenitic Cr-Ni-Mo Stainless Steel (Low Carbon)
SF8 317L, S31703, Cold Worked Austenitic Cr-Ni-Mo Stainless Steel (Low Carbon)
SF9 321, S32100, Annealed Austenitic Cr-Ni Stainless Steel (Titanium Stabilized)
SG0 321, S32100, Cold Worked Austenitic Cr-Ni Stainless Steel (Titanium Stabilized)
SG1 321H, S32109, Annealed Austenitic Cr-Ni Stainless Steel (Titanium Stabilized), High Carbon
(321H)
SG2 321H, S32109, Cold Worked Austenitic Cr-Ni Stainless Steel (Titanium Stabilized), High Carbon
(321H)
SG3 329, S32900, Annealed Ferritic-Austenitic Cr-Ni Stainless Steel
SG4 329, S32900, Cold Worked Ferritic-Austenitic Cr-Ni Stainless Steel
SG5 347, S34700, Annealed Austenitic Cr-Ni Stainless Steel (Columbium Stabilized)
SG6 347, S34700, Cold Worked Austenitic Cr-Ni Stainless Steel (Columbium Stabilized)
SG7 347H, S34709, Annealed Austenitic Cr-Ni Stainless Steel (Columbium Stabilized), High
Carbon (347-H)
SG8 347H, S34709, Cold Worked Austenitic Cr-Ni Stainless Steel (Columbium Stabilized), High
Carbon (347-H)
SG9 348, S34800, Annealed Austenitic Cr-Ni Stainless Steel (Columbium Stabilized)
(Ta and Co Restricted)
SH0 348, S34800, Cold Worked Austenitic Cr-Ni Stainless Steel (Columbium Stabilized)
(Ta and Co Restricted)
SH1 348H, S34809, Annealed Austenitic Cr-Ni Stainless Steel (Columbium Stabilized), High
Carbon (Ta and Co Restricted) (348-H)
SH2 348H, S34809, Cold Worked Austenitic Cr-Ni Stainless Steel (Columbium Stabilized), High
Carbon (Ta and Co Restricted) (348-H)
SH3 384, S38400, Annealed Austenitic Cr-Ni Stainless Steel (Low Work Hardening)
SH4 384, S38400, Cold Worked Austenitic Cr-Ni Stainless Steel (Low Work Hardening)
90
ASME B18.24-2015
SH5 UNS S20100, S20200, or S20500, Annealed Stainless Steel
SH6 UNS S20100, S20200, or S20500, Cold Worked Stainless Steel
SH7 Any Austenitic Stainless Steel, Annealed Stainless Steel
SH8 Any Austenitic Stainless Steel, Cold Worked Stainless Steel
SH9 405, S40500, Annealed Cr Stainless Steel (Not Hardenable by Heat Treatment)
SJ0 405, S40500, Cold Worked Cr Stainless Steel (Not Hardenable by Heat Treatment)
SJ1 409, S40900, Annealed Ferritic Cr Stainless Steel
SJ2 409, S40900, Cold Worked Ferritic Cr Stainless Steel
SJ3 429, S42900, Annealed Cr Stainless Steel
SJ4 429, S42900, Cold Worked Cr Stainless Steel
SJ5 430, S43000, Annealed Cr Stainless Steel
SJ6 430, S43000, Cold Worked Cr Stainless Steel
SJ7 430F, S43020, Annealed Free Machining Cr Stainless Steel (S Bearing)
SJ8 430F, S43020, Cold Worked Free Machining Cr Stainless Steel (S Bearing)
SJ9 430Fse, S43023, Annealed Free Machining Cr Stainless Steel (Se Bearing)
SK0 430Fse, S43023, Cold Worked Free Machining Cr Stainless Steel (Se Bearing)
SK1 434, S43400, Annealed Cr-Mo Stainless Steel
SK2 434, S43400, Cold Worked Cr-Mo Stainless Steel
SK3 436, S43600, Annealed Cr-Mo Stainless Steel
SK4 436, S43600, Cold Worked Cr-Mo Stainless Steel
SK5 442, S44200, Annealed Cr Heat Resisting Steel
SK6 442, S44200, Cold Worked Cr Heat Resisting Steel
SK7 444, S44400, Annealed Cr-Mo Stainless Steel (Stabilized Low-Inerstitial Ferritic)
SK8 444, S44400, Cold Worked Cr-Mo Stainless Steel (Stabilized Low-Inerstitial Ferritic)
SK9 446, S44600, Annealed Cr Heat Resisting Steel
SL0 446, S44600, Cold Worked Cr Heat Resisting Steel
SL1 UNS S40500, -900, 42900, 43000, -020, -023, Stainless Steel
43400, -600, 44200, -400 (Ferritic S.S.), Annealed
SL2 UNS S40500, -900, 42900, 43000, -020, -023, Stainless Steel
43400, -600, 44200, -400 (Ferritic S.S.), Cold Worked
SL3 403, S40300, Annealed Cr Stainless Steel (Hardenable by Heat Treatment)
SL4 403, S40300, Quenched and Tempered Cr Stainless Steel (Hardenable by Heat Treatment)
SL5 410, S41000, Annealed Cr Stainless Steel (Hardenable by Heat Treatment)
SL6 410, S41000, Quenched and Tempered Cr Stainless Steel (Hardenable by Heat Treatment)
SL7 414, S41400, Annealed Cr Stainless Steel With Low Nickel Content
91
ASME B18.24-2015
SL8 414, S41400, Quenched and Tempered Cr Stainless Steel With Low Nickel Content
SL9 416, S41600, Annealed Cr Stainless Steel (Free Machining)
SM0 416, S41600, Quenched and Tempered Cr Stainless Steel (Free Machining)
SM1 416Se, S41623, Annealed Martensitic Cr Free Machining Stainless Steel (Se Bearing)
SM2 416Se, S41623, Quenched and Tempered Martensitic Cr Free Machining Stainless Steel (Se Bearing)
SM3 420, S42000, Annealed Hardenable Cr Stainless Steel
SM4 420, S42000, Quenched and Tempered Hardenable Cr Stainless Steel
SM5 420F, S42020, Annealed Hardenable Cr Free Machining Stainless Steel
SM6 420F, S42020, Quenched and Tempered Hardenable Cr Free Machining Stainless Steel
SM7 422, S42200, Annealed Martensitic Cr Stainless Steel
SM8 422, S42200, Quenched and Tempered Martensitic Cr Stainless Steel
SM9 431, S43100, Annealed Ni Bearing Hardenable Cr Stainless Steel
SN0 431, S43100, Quenched and Tempered Ni Bearing Hardenable Cr Stainless Steel
SN1 440A, S44002, Annealed Hardenable Cr Stainless Steel (440 A)
SN2 440A, S44002, Quenched and Tempered Hardenable Cr Stainless Steel (440 A)
SN3 440B, S44003, Annealed Hardenable Cr Stainless Steel (440 B)
SN4 440B, S44003, Quenched and Tempered Hardenable Cr Stainless Steel (440 B)
SN5 440C, S44004, Annealed Hardenable Cr Stainless Steel (440 C)
SN6 440C, S44004, Quenched and Tempered Hardenable Cr Stainless Steel (440 C)
SN7 501, S50100, Annealed Cr Heat Resisting Steel
SN8 501, S50100, Quenched and Tempered Cr Heat Resisting Steel
SP3 502, S50200, Annealed Cr Heat Resisting Steel
SP4 502, S50200, Quenched and Tempered Cr Heat Resisting Steel
SP9 UNS S40300, 41000, -400, -600, -623, 42000, -020, Stainless Steel
-200, 43100, 44002, -003, -004 (Martensitic S.S.),
Annealed
SQ0 UNS S40300, 41000, -400, -600, -623, 42000, -020, Stainless Steel
-200, 43100, 44002, -003, -004 (Martensitic S.S.),
Quenched and Tempered
SQ1 A286, S66286, Solution Treated and Aged, S15700 Iron Base Superalloy (A286)
SQ2 15-7PH, Annealed, UNS S15700 Precipitation Hardenable Cr-Ni-Mo-Al Stainless Steel (PH 15-7 Mo)
SQ3 15-7PH, Solution Treated and Aged, S15700 Precipitation Hardenable Cr-Ni-Mo-Al Stainless Steel (PH 15-7 Mo)
92
ASME B18.24-2015
SQ4 14-8PH, Annealed, S14800 Precipitation Hardenable Cr-Ni-Mo-Al Stainless Steel (PH 14-8 Mo)
SQ5 14-8PH, Solution Treated and Aged, S14800 Precipitation Hardenable Cr-Ni-Mo-Al Stainless Steel (PH 14-8 Mo)
SQ6 PH-13-8MO, Annealed, S13800 Precipitation Hardenable Cr-Ni-AL-Mo Stainless Steel (PH 13-8 Mo)
SQ7 PH-13-8MO, Solution Treated and Aged, S13800 Precipitation Hardenable Cr-Ni-AL-Mo Stainless Steel (PH 13-8 Mo)
SQ8 15-5PH, Annealed, S15500 Precipitation Hardenable Cr-Ni-Cu Stainless Steel (15-5 PH)
SQ9 15-5PH, Solution Treated and Aged, S15500 Precipitation Hardenable Cr-Ni-Cu Stainless Steel (15-5 PH)
SR0 17-4PH, Annealed, S17400 Precipitation Hardenable Cr-Ni-Cu Stainless Steel (17-4 PH)
SR1 17-4PH, Solution Treated and Aged, S17400 Precipitation Hardenable Cr-Ni-Cu Stainless Steel (17-4 PH)
SR2 17-7PH, Annealed, S17700 Precipitation Hardenable Cr-Ni-Al Stainless Steel (17-7 PH)
SR3 17-7PH, Solution Treated and Aged, S17700 Precipitation Hardenable Cr-Ni-Al Stainless Steel (17-7 PH)
SR4 UNS S15700, 14800, 13800, 15500, 17400, 17700 Stainless Steel
(Precipitation Hardening), Annealed
SR5 UNS S15700, 14800, 13800, 15500, 17400, 17700 Stainless Steel
(Precipitation Hardening), Solution Treated and Aged
Table 5-4 Material and Treatment: UNS Nonferrous Materials

UA1 462, C46200 Naval Brass, 63-1/2%
UA3 2024, A92024 Wrought Aluminum Alloy, Heat Treatable
UA4 6061-T73, A96061 Wrought Aluminum Alloy, Heat Treatable
UA5 7075-T73, A97075 Wrought Aluminum Alloy, Heat Treatable
UA6 UNS A92024, A96061, or A97075 Wrought Aluminum Alloy, Heat Treatable
UA7 110, C11000 Copper, Electrolytic Tough Pitch Copper (ETP)
UA8 145, C14500 Phosphorous Deoxidized Copper
UA9 147, C14700 Sulfer Bearing Copper
UB0 UNS C11000, C14500, or C14700 Copper
UK5 172, C17200 Beryllium Copper
UB1 210, C21000 Gilding, 95% (Copper/Zinc)
UB2 220, C22000 Commercial Bronze, 90%
UB3 230, C23000 Red Brass, 85%
UB4 240, C24000 Low Brass, 80%
UB5 260, C26000 Cartridge Brass, 70%
UB6 268, C26800 Yellow Brass, 66%
93
ASME B18.24-2015
Table 5-4 Material and Treatment: UNS Nonferrous Materials (Cont’d)

UB8 272, C27200 Brass
UC0 UNS C21000, 22000, 23000, 24000, 26000, 26800, 27000, Brass
27200, or 27400
UC1 335, C33500 Low Leaded Brass
UC2 340, C34000 Medium Leaded Brass, 64.5%
UC3 342, C34200 High Leaded Brass, 64.5%
UC4 350, C35000 Medium Leaded Brass, 62%
UC5 3534, C35340 Leaded Brass
UC6 356, C35600 Leaded Brass Alloy
UC7 UNS C33500, 34000, 34200, 35000, 35340, or 35600 Brass
UC8 360, C36000 Free Cutting Brass
UC9 365, C36500 Leaded Muntz Metal, Uninhibited (Cu-Zn-Pb)
UD0 377, C37700 Forging Brass
UD2 464, C46400 Naval Brass, Uninhibited
UD4 482, C48200 Naval Brass, Medium Leaded
UD5 485, C48500 Naval Brass, High Leaded
UD6 510, C51000 Phosphor Bronze, 5% A
UD7 521, C52100 Phosphor Bronze, 8%
UD8 524, C52400 Phosphor Bronze, 10%
UD9 UNS C5100, C52100, or C52400 Phosphor Bronze
UE0 613, C61300 Aluminum Bronze
UE1 614, C61400 Aluminum Bronze D
UE9 6421, C64210 Aluminum Silicon Bronze
UF0 651, C65100 Low Silicon Bronze B
UF1 655, C65500 High Silicon Bronze A
UF2 661, C66100 Silicon Bronze
UF3 675, C67500 Manganese Bronze A
94
ASME B18.24-2015

UF4 710, C71000 Copper-Nickel, 20%
UF5 UNS C11000, 27000, 36000, 46200, -400, 48200, 51000, 61300, Brass/Bronze/Copper-Nickel Alloy
-400, 63000, -200, 64200, 65100, 65500, 66100, 67500, 71000
UF6 715, C71500 Copper-Nickel, 30%
UK6 729, C72900 Copper-Nickel Tin Spinodal Alloy
UF7 745, C74500 Nickel Silver, 65-10
UG0 764, C76400 Nickel Silver
UG1 770, C77000 Nickel Silver, 55-18
UG2 774, C77400 Nickel Silver
UG3 UNS C36500, 37700, 46400, 48200, 48500, 61900, 62300, Brass/Bronze
63000, 63200, 64200, 64210, 65500, or 77400
UG4 792, C79200 Leaded Nickel Silver
UG5 UNS C71200, 71000, 74500, 75200, 75700, 76400, 77000, or Leaded Nickel Silver
79200
UG6 Ni400HF, N04400 Ni-Cu Alloy Solid Solution Strengthened (Monel 400)
UG7 R405, N04405 Ni-Cu Alloy Solid Solution Strengthened (Monel R405)
UG8 K5000, N05500 Ni-Cu Alloy Precipitation Hardenable (Monel K500)
UG9 N10001 Ni-Mo Alloy Solid Solution Strengthened (Hastelloy C)
UH0 C276, N10276 Ni-Mo Alloy Solid Solution Strengthened (Hastelloy C276)
UH1 R50250 Titanium, Unalloyed
UH6 R54520 Titanium Alloy
UJ0 R54810 Titanium Alloy
95
ASME B18.24-2015

UJ6 R56401 Titanium Alloy 6AI-4V ELI
UJ7 R56402 Titanium Alloy Welding Filler Metal
UK0 R58010 Titanium Alloy
UK2 R58640 Titanium Alloy Beta C (Grade 19)
UK4 UNS R50250, -400, -550, -700, 52400, 54520, 54521, -560, -620, Titanium Alloy
-810, 56080, -210, -260, -320, -400, -401, -402, -430, -620, 58010,
-030, -640, -820
Table 5-5 Material and Treatment: SAE Material Specifications

WJ1 SAE J403 1055-1065 Carbon Steel
WJ2 SAE J404 4037 Alloy Steel
WJ3 SAE J405 302-305 Stainless Steel
WJ4 SAE J405 316 Stainless Steel
WJ5 SAE J411 10B55-10B65 Boron Steel
WA1 SAE J429 — Grade 2 Carbon Steel
WA3 SAE J429 — Grade 5.1 Carbon Steel
WF1 SAE J429 — Grade 1 Carbon Steel
WF3 SAE J429 — Grade 8.1 Carbon Steel
96
ASME B18.24-2015
Table 5-5 Material and Treatment: SAE Material Specifications (Cont’d)

WB0 SAE J995 — Grade 8 Carbon Steel
WB1 SAE J1199 Property Class 4.6 Carbon Steel
WB5 SAE J1199 Property Class 9 Carbon Steel
WB8 SAE J1199 Property Class 10 Carbon Steel
WC0 SAE J1199 Property Class 10.9 Carbon Steel
Table 5-6 Material and Treatment: ISO Material Specifications

WC1 ISO 898-1 Property Class 8.8 Carbon Steel
WC3 ISO 898-1 Property Class 12.9 Alloy Steel
WF8 ISO 898-1 Property Class 4.6 Carbon Steel
WF9 ISO 898-1 Property Class 5.8 Carbon Steel
WC5 ISO 898-2 Property Class 4 Carbon Steel
WJ6 ISO 3506-1 Property Class A2-70 304 or Similar Stainless Steel
WJ7 ISO 3506-1 Property Class A4-70 316 Stainless Steel
WJ8 ISO 3506-2 Property Class A2-80 304 or Similar Stainless Steel
WJ9 ISO 3506-2 Property Class A4-80 316 Stainless Steel
97
ASME B18.24-2015
Table 5-7 Material and Treatment: IFI Material Specifications

WD1 IFI 140, Grade 1006 Carbon Steel
WD5 IFI 140, Grade 1022/A Carbon Steel
WD6 IFI 140, Grade 1022/B Carbon Steel
WE0 IFI 140, Grade 10B21 Carbon Steel
WE1 IFI 140, Grade 10B38 Carbon Steel
WE2 IFI 140, Grade 1335 Alloy Steel
WE3 IFI 140, Grade 1541/A Carbon Steel
WE4 IFI 140, Grade 1541/B Carbon Steel
WF0 IFI 140, Grade 8637 Alloy Steel
WF9 IFI 140, Grade 5140 Alloy Steel
Table 5-8 Material and Treatment: B18.16.1M

WG1 ANSI B18.16.1M Property Class 5 Carbon Steel
Table 5-9 Material and Treatment: B18.6.6

WK0 ANSI B18.6.6 Property Grade NE2 Carbon Steel
98
ASME B18.24-2015
Table 6-1 Plating, Coating, and Passivation: Plain, Unfinished

Plain, No Finish
PIN Finish Spec Finish
A1 Plain, No Finish None
Table 6-2 Plating, Coating, and Passivation: ASTM Finish Specifications

ASTM A153–Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A2 ASTM A153 Zinc Plate
ASTM A380–Cleaning Descaling, and Passivation of Stainless Steel Parts
A3 ASTM A380 Passivate
ASTM B633–Electrodeposited Coatings of Zinc on Iron and Steel
A4 ASTM B633, Type I, SC 1 Zinc Plate
A8 ASTM B633, Type II, SC 1 Zinc Plate
A9 ASTM B633, Type II, SC 2 Zinc Plate
AA ASTM B633, Type II, SC 3 Zinc Plate
AB ASTM B633, Type II, SC 4 Zinc Plate
AC ASTM B633, Type III, SC 1 Zinc Plate
AD ASTM B633, Type III, SC 2 Zinc Plate
AE ASTM B633, Type III, SC 3 Zinc Plate
AF ASTM B633, Type III, SC 4 Zinc Plate
AG ASTM B633, Type IV, SC 1 Zinc Plate
AH ASTM B633, Type IV, SC 2 Zinc Plate
AJ ASTM B633, Type IV, SC 3 Zinc Plate
AK ASTM B633, Type IV, SC 4 Zinc Plate
MA ASTM B633, Type V, SC 1 Zinc Plate
MB ASTM B633, Type V, SC 2 Zinc Plate
MC ASTM B633, Type V, SC 3 Zinc Plate
99
ASME B18.24-2015
Table 6-2 Plating, Coating, and Passivation: ASTM Finish Specifications (Cont’d)
ASTM B633–Electrodeposited Coatings of Zinc on Iron and Steel (Cont’d)
MD ASTM B633, Type V, SC 4 Zinc Plate
ME ASTM B633, Type VI, SC 1 Zinc Plate
MF ASTM B633, Type VI, SC 2 Zinc Plate
MG ASTM B633, Type VI, SC 3 Zinc Plate
MH ASTM B633, Type VI, SC 4 Zinc Plate
ASTM B695–Coatings of Zinc Mechanically Deposited on Iron and Steel
AL ASTM B695, Type I, Class 5 Zinc Plate
AM ASTM B695, Type I, Class 8 Zinc Plate
AN ASTM B695, Type I, Class 12 Zinc Plate
AP ASTM B695, Type I, Class 25 Zinc Plate
AQ ASTM B695, Type I, Class 40 Zinc Plate
AR ASTM B695, Type I, Class 50 Zinc Plate
MI ASTM B695, Type I, Class 55 Zinc Plate
AS ASTM B695, Type II, Class 5 Zinc Plate
AT ASTM B695, Type II, Class 8 Zinc Plate
AU ASTM B695, Type II, Class 12 Zinc Plate
AV ASTM B695, Type II, Class 25 Zinc Plate
AW ASTM B695, Type II, Class 40 Zinc Plate
AX ASTM B695, Type II, Class 50 Zinc Plate
MJ ASTM B695, Type II, Class 55 Zinc Plate
ASTM B696–Coatings of Cadmium Mechanically Deposited
AY ASTM B696, Type I, Class 5 Cadmium Plate
AZ ASTM B696, Type I, Class 8 Cadmium Plate
B0 ASTM B696, Type I, Class 12 Cadmium Plate
B1 ASTM B696, Type II, Class 5 Cadmium Plate
ASTM B766–Electrodeposited Coatings of Cadmium
100
ASME B18.24-2015
ASTM B766–Electrodeposited Coatings of Cadmium (Cont’d)
BA ASTM B766, Type II, Class 12 Cadmium Plate
BB ASTM B766, Type II, Class 25 Cadmium Plate
BC ASTM B766, Type III, Class 5 Cadmium Plate
BD ASTM B766, Type III, Class 8 Cadmium Plate
BE ASTM B766, Type III, Class 12 Cadmium Plate
BF ASTM B766, Type III, Class 25 Cadmium Plate
ASTM F871 MN–Electrodeposited Coatings on Threaded Components (Metric)
BG ASTM F871M, A165 SC 1 Cadmium Plate
BH ASTM F871 M, A165 SC 2 Zinc Plate
BJ ASTM F871 M, A165 SC 3 Zinc Plate
BK ASTM F871 M, N633 SC 0 Zinc Plate
BL ASTM F871 M, N633 SC 1 Zinc Plate
BM ASTM F871 M, N633 SC 2 Zinc Plate
BN ASTM F871 M, N633 SC 3 Zinc Plate
BP ASTM F871 M, N633 SC 4 Zinc Plate
BQ ASTM F871 M, B456 SC 1 Zinc Plate
BR ASTM F871 M, B456 SC 2 Zinc Plate
BS ASTM F871 M, B456 SC 3 Zinc Plate
BT ASTM F871 M, B456 SC 4 Zinc Plate
ASTM A967–Chemical Passivation Treatments for Stainless Steel Parts
BU ASTM A967, Citric 1 Passivate
BV ASTM A967, Citric 2 Passivate
BW ASTM A967, Citric 3 Passivate
BX ASTM A967, Citric 4 Passivate
BY ASTM A967, Nitric 1 Passivate
BZ ASTM A967, Nitric 2 Passivate
101
ASME B18.24-2015
ASTM A967–Chemical Passivation Treatments for Stainless Steel Parts (Cont’d)
C0 ASTM A967, Nitric 3 Passivate
ASTM F1135–Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
C3 ASTM F1135, Grade 1, Code A Zinc Plate
C4 ASTM F1135, Grade 1, Code B Zinc Plate
CA ASTM F1135, Grade 4, Code B Zinc Plate
CB ASTM F1135, Grade 5, Code A Cadmium Plate
CC ASTM F1135, Grade 5, Code B Cadmium Plate
CD ASTM F1135, Grade 6, Code A Cadmium Plate
CE ASTM F1135, Grade 6, Code B Cadmium Plate
CF ASTM F1135, Grade 7, Code A Cadmium Plate
CG ASTM F1135, Grade 7, Code B Cadmium Plate
CH ASTM F1135, Grade 8, Code A Cadmium Plate
CJ ASTM F1135, Grade 8, Code B Cadmium Plate
ASTM F1136–Chromium/Zinc Corrosion Protective Coatings for Fasteners
CK ASTM F1136, Grade 1 Chromium/Zinc Coating
CL ASTM F1136, Grade 2 Chromium/Zinc Coating
CM ASTM F1136, Grade 3 Chromium/Zinc Coating
1X ASTM F1136, Grade 4 Zinc/Aluminum Coating
2X ASTM F1136, Grade 5 Zinc/Aluminum Coating
3X ASTM F 1136, Grade 6 [Note (1)] Zinc/Aluminum Coating
ASTM F1137–Phosphate Oil/Oil and Phosphate/Organic Corrosive Protective Coatings for Fasteners
CN ASTM F1137, Grade I [Note (1)] Zinc Phosphate Coating
CP ASTM F1137, Grade II [Note (1)] Zinc Phosphate Coating
102
ASME B18.24-2015
ASTM F1137–Phosphate Oil/Oil and Phosphate/Organic Corrosive Protective Coatings for Fasteners (Cont’d)
CQ ASTM F1137, Grade III [Note (1)] Zinc Phosphate Coating
CR ASTM F1137, Grade A Zinc Phosphate Coating
CS ASTM F1137, Grade B Zinc Phosphate Coating
CT ASTM F1137, Grade C Zinc Phosphate Coating
CU ASTM F1137, Grade D Zinc Phosphate Coating
ASTM F1428–Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
CV ASTM F1428, Grade 1A Aluminum Coating
CW ASTM F1428, Grade 1B Aluminum Coating
ASTM F1428–Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
CX ASTM F1428, Grade 1C Aluminum Coating
CY ASTM F1428, Grade 2A Aluminum Coating
CZ ASTM F1428, Grade 2B Aluminum Coating
D0 ASTM F1428, Grade 2C Aluminum Coating
D1 ASTM F1428, Grade 3A Aluminum Coating
D2 ASTM F1428, Grade 3B Aluminum Coating
D3 ASTM F1428, Grade 4A Aluminum Coating
D4 ASTM F1428, Grade 4B Aluminum Coating
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Coating Fe/Zn
D5 ASTM F1941, Zinc Coating Fe/Zn, Type 1A [Note (1)] Zinc Plate
D6 ASTM F1941, Zinc Coating Fe/Zn, Type 2A [Note (1)] Zinc Plate
D7 ASTM F1941, Zinc Coating Fe/Zn, Type 3A Zinc Plate
D8 ASTM F1941, Zinc Coating Fe/Zn, Type 5A Zinc Plate
1A ASTM F1941, Zinc Coating Fe/Zn, Type 8A Zinc Plate
2A ASTM F1941, Zinc Coating Fe/Zn, Type 12A Zinc Plate
D9 ASTM F1941, Zinc Coating Fe/Zn, Type 1B [Note (1)] Zinc Plate
DA ASTM F1941, Zinc Coating Fe/Zn, Type 2B [Note (1)] Zinc Plate
DB ASTM F1941, Zinc Coating Fe/Zn, Type 3B Zinc Plate
DC ASTM F1941, Zinc Coating Fe/Zn, Type 5B Zinc Plate
3A ASTM F1941, Zinc Coating Fe/Zn, Type 8B Zinc Plate
4A ASTM F1941, Zinc Coating Fe/Zn, Type 12B Zinc Plate
103
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Coating Fe/Zn (Cont’d)
DD ASTM F1941, Zinc Coating Fe/Zn, Type 1C [Note (1)] Zinc Plate
DE ASTM F1941, Zinc Coating Fe/Zn, Type 2C [Note (1)] Zinc Plate
DF ASTM F1941, Zinc Coating Fe/Zn, Type 3C Zinc Plate
DG ASTM F1941, Zinc Coating Fe/Zn, Type 5C Zinc Plate
5A ASTM F1941, Zinc Coating Fe/Zn, Type 8C Zinc Plate
6A ASTM F1941, Zinc Coating Fe/Zn, Type 12C Zinc Plate
DH ASTM F1941, Zinc Coating Fe/Zn, Type 1D [Note (1)] Zinc Plate
DJ ASTM F1941, Zinc Coating Fe/Zn, Type 2D [Note (1)] Zinc Plate
DK ASTM F1941, Zinc Coating Fe/Zn, Type 3D Zinc Plate
DL ASTM F1941, Zinc Coating Fe/Zn, Type 5D Zinc Plate
7A ASTM F1941, Zinc Coating Fe/Zn, Type 8D Zinc Plate
8A ASTM F1941, Zinc Coating Fe/Zn, Type 12D Zinc Plate
DM ASTM F1941, Zinc Coating Fe/Zn, Type 1E [Note (1)] Zinc Plate
DN ASTM F1941, Zinc Coating Fe/Zn, Type 2E [Note (1)] Zinc Plate
DP ASTM F1941, Zinc Coating Fe/Zn, Type 3E Zinc Plate
DQ ASTM F1941, Zinc Coating Fe/Zn, Type 5E Zinc Plate
9A ASTM F1941, Zinc Coating Fe/Zn, Type 8E Zinc Plate
1B ASTM F1941, Zinc Coating Fe/Zn, Type 12E Zinc Plate
DR ASTM F1941, Zinc Coating Fe/Zn, Type 1F [Note (1)] Zinc Plate
DS ASTM F1941, Zinc Coating Fe/Zn, Type 2F [Note (1)] Zinc Plate
DT ASTM F1941, Zinc Coating Fe/Zn, Type 3F Zinc Plate
DU ASTM F1941, Zinc Coating Fe/Zn, Type 5F Zinc Plate
2B ASTM F1941, Zinc Coating Fe/Zn, Type 8F Zinc Plate
3B ASTM F1941, Zinc Coating Fe/Zn, Type 12F Zinc Plate
4B ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 3AT Zinc Plate
8B ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 3BT Zinc Plate
9B ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 5BT Zinc Plate
1C ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 8BT Zinc Plate
2C ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 12BT Zinc Plate
3C ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 3CT Zinc Plate
104
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Coating Fe/Zn (Cont’d)
7C ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 3DT Zinc Plate
1D ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 12DT Zinc Plate
2D ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 3ET Zinc Plate
6D ASTM F1941, Zinc Coating Fe/Zn, Trivalent Chromate, Type 3FT Zinc Plate
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Cadmium Coating Fe/Cd
DV ASTM F1941, Cadmium Coating Fe/Cd, Type 1A [Note (1)] Cadmium Plate
DW ASTM F1941, Cadmium Coating Fe/Cd, Type 2A [Note (1)] Cadmium Plate
DX ASTM F1941, Cadmium Coating Fe/Cd, Type 3A Cadmium Plate
DY ASTM F1941, Cadmium Coating Fe/Cd, Type 5A Cadmium Plate
1E ASTM F1941, Cadmium Coating Fe/Cd, Type 8A Cadmium Plate
2E ASTM F1941, Cadmium Coating Fe/Cd, Type 12A Cadmium Plate
DZ ASTM F1941, Cadmium Coating Fe/Cd, Type 1B [Note (1)] Cadmium Plate
E0 ASTM F1941, Cadmium Coating Fe/Cd, Type 2B [Note (1)] Cadmium Plate
E1 ASTM F1941, Cadmium Coating Fe/Cd, Type 3B Cadmium Plate
E2 ASTM F1941, Cadmium Coating Fe/Cd, Type 5B Cadmium Plate
3E ASTM F1941, Cadmium Coating Fe/Cd, Type 8B Cadmium Plate
4E ASTM F1941, Cadmium Coating Fe/Cd, Type 12B Cadmium Plate
E3 ASTM F1941, Cadmium Coating Fe/Cd, Type 1C [Note (1)] Cadmium Plate
E4 ASTM F1941, Cadmium Coating Fe/Cd, Type 2C [Note (1)] Cadmium Plate
E5 ASTM F1941, Cadmium Coating Fe/Cd, Type 3C Cadmium Plate
E6 ASTM F1941, Cadmium Coating Fe/Cd, Type 5C Cadmium Plate
105
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Cadmium Coating Fe/Cd (Cont’d)
5E ASTM F1941, Cadmium Coating Fe/Cd, Type 8C Cadmium Plate
6E ASTM F1941, Cadmium Coating Fe/Cd, Type 12C Cadmium Plate
E7 ASTM F1941, Cadmium Coating Fe/Cd, Type 1D [Note (1)] Cadmium Plate
E8 ASTM F1941, Cadmium Coating Fe/Cd, Type 2D [Note (1)] Cadmium Plate
E9 ASTM F1941, Cadmium Coating Fe/Cd, Type 3D Cadmium Plate
EA ASTM F1941, Cadmium Coating Fe/Cd, Type 5D Cadmium Plate
7E ASTM F1941, Cadmium Coating Fe/Cd, Type 8D Cadmium Plate
8E ASTM F1941, Cadmium Coating Fe/Cd, Type 12D Cadmium Plate
EB ASTM F1941, Cadmium Coating Fe/Cd, Type 1E [Note (1)] Cadmium Plate
EC ASTM F1941, Cadmium Coating Fe/Cd, Type 2E [Note (1)] Cadmium Plate
ED ASTM F1941, Cadmium Coating Fe/Cd, Type 3E Cadmium Plate
EE ASTM F1941, Cadmium Coating Fe/Cd, Type 5E Cadmium Plate
9E ASTM F1941, Cadmium Coating Fe/Cd, Type 8E Cadmium Plate
1F ASTM F1941, Cadmium Coating Fe/Cd, Type 12E Cadmium Plate
EF ASTM F1941, Cadmium Coating Fe/Cd, Type 1F [Note (1)] Cadmium Plate
EG ASTM F1941, Cadmium Coating Fe/Cd, Type 2F [Note (1)] Cadmium Plate
EH ASTM F1941, Cadmium Coating Fe/Cd, Type 3F Cadmium Plate
EJ ASTM F1941, Cadmium Coating Fe/Cd, Type 5F Cadmium Plate
2F ASTM F1941, Cadmium Coating Fe/Cd, Type 8F Cadmium Plate
3F ASTM F1941, Cadmium Coating Fe/Cd, Type 12F Cadmium Plate
4F ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 3AT Cadmium Plate
8F ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 3BT Cadmium Plate
9F ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 5BT Cadmium Plate
1G ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 8BT Cadmium Plate
2G ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 12BT Cadmium Plate
3G ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 3CT Cadmium Plate
7G ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 3DT Cadmium Plate
106
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Cadmium Coating Fe/Cd (Cont’d)
1H ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 12DT Cadmium Plate
2H ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 3ET Cadmium Plate
6H ASTM F1941, Cadmium Coating Fe/Cd, Trivalent Chromate, Type 3FT Cadmium Plate
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Cobalt Alloy Fe/Zn-Co
EK ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 1A [Note (1)] Zinc Plate
EL ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 2A [Note (1)] Zinc Plate
EM ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 3A Zinc Plate
EN ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 5A Zinc Plate
1J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 8A Zinc Plate
2J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 12A Zinc Plate
EP ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 1B [Note (1)] Zinc Plate
EQ ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 2B [Note (1)] Zinc Plate
ER ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 3B Zinc Plate
ES ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 5B Zinc Plate
3J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 8B Zinc Plate
4J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 12B Zinc Plate
ET ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 1C [Note (1)] Zinc Plate
EU ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 2C [Note (1)] Zinc Plate
EV ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 3C Zinc Plate
EW ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 5C Zinc Plate
5J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 8C Zinc Plate
6J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 12C Zinc Plate
EX ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 1D [Note (1)] Zinc Plate
EY ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 2D [Note (1)] Zinc Plate
107
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Cobalt Alloy Fe/Zn-Co (Cont’d)
EZ ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 3D Zinc Plate
F0 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 5D Zinc Plate
7J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 8D Zinc Plate
8J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 12D Zinc Plate
F1 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 1E [Note (1)] Zinc Plate
F2 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 2E [Note (1)] Zinc Plate
F3 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 3E Zinc Plate
F4 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 5E Zinc Plate
9J ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 8E Zinc Plate
1K ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 12E Zinc Plate
F5 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 1F [Note (1)] Zinc Plate
F6 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 2F [Note (1)] Zinc Plate
F7 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 3F Zinc Plate
F8 ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 5F Zinc Plate
2K ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 8F Zinc Plate
3K ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Type 12F Zinc Plate
4K ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 3AT Zinc Plate
8K ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 3BT Zinc Plate
9K ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 5BT Zinc Plate
1L ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 8BT Zinc Plate
2L ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 12BT Zinc Plate
3L ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 3CT Zinc Plate
7L ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 3DT Zinc Plate
1M ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 12DT Zinc Plate
2M ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 3ET Zinc Plate
108
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Cobalt Alloy Fe/Zn-Co (Cont’d)
6M ASTM F1941, Zinc Cobalt Alloy Fe/Zn-Co, Trivalent Chromate, Type 3FT Zinc Plate
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Nickel Alloy Fe/Zn-Ni
F9 ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 1A [Note (1)] Zinc Plate
FA ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 2A [Note (1)] Zinc Plate
FB ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 3A Zinc Plate
FC ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 5A Zinc Plate
1N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 8A Zinc Plate
2N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 12A Zinc Plate
FD ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 1B [Note (1)] Zinc Plate
FE ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 2B [Note (1)] Zinc Plate
FF ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 3B Zinc Plate
FG ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 5B Zinc Plate
3N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 8B Zinc Plate
4N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 12B Zinc Plate
FH ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 1C [Note (1)] Zinc Plate
FJ ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 2C [Note (1)] Zinc Plate
FK ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 3C Zinc Plate
FL ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 5C Zinc Plate
5N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 8C Zinc Plate
6N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 12C Zinc Plate
FM ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 1D [Note (1)] Zinc Plate
FN ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 2D [Note (1)] Zinc Plate
FP ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 3D Zinc Plate
FQ ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 5D Zinc Plate
7N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 8D Zinc Plate
8N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 12D Zinc Plate
109
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Nickel Alloy Fe/Zn-Ni (Cont’d)
FR ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 1E [Note (1)] Zinc Plate
FS ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 2E [Note (1)] Zinc Plate
FT ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 3E Zinc Plate
FU ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 5E Zinc Plate
9N ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 8E Zinc Plate
1P ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 12E Zinc Plate
FV ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 1F [Note (1)] Zinc Plate
FW ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 2F [Note (1)] Zinc Plate
FX ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 3F Zinc Plate
FY ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 5F Zinc Plate
2P ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 8F Zinc Plate
3P ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Type 12F Zinc Plate
4P ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 3AT Zinc Plate
8P ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 3BT Zinc Plate
9P ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 5BT Zinc Plate
1Q ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 8BT Zinc Plate
2Q ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 12BT Zinc Plate
3Q ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 3CT Zinc Plate
7Q ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 3DT Zinc Plate
1R ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 12DT Zinc Plate
2R ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 3ET Zinc Plate
6R ASTM F1941, Zinc Nickel Alloy Fe/Zn-Ni, Trivalent Chromate, Type 3FT Zinc Plate
110
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Nickel Alloy Fe/Zn-Ni (Cont’d)
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Iron Alloy Fe/Zn-Fe
FZ ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 1A [Note (1)] Zinc Plate
G0 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 2A [Note (1)] Zinc Plate
G1 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 3A Zinc Plate
G2 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 5A Zinc Plate
1S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 8A Zinc Plate
2S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 12A Zinc Plate
G3 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 1B [Note (1)] Zinc Plate
G4 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 2B [Note (1)] Zinc Plate
G5 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 3B Zinc Plate
G6 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 5B Zinc Plate
3S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 8B Zinc Plate
4S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 12B Zinc Plate
G7 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 1C [Note (1)] Zinc Plate
G8 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 2C [Note (1)] Zinc Plate
G9 ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 3C Zinc Plate
GA ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 5C Zinc Plate
5S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 8C Zinc Plate
6S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 12C Zinc Plate
GB ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 1D [Note (1)] Zinc Plate
GC ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 2D [Note (1)] Zinc Plate
GD ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 3D Zinc Plate
GE ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 5D Zinc Plate
7S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 8D Zinc Plate
8S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 12D Zinc Plate
GF ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 1E [Note (1)] Zinc Plate
GG ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 2E [Note (1)] Zinc Plate
GH ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 3E Zinc Plate
GJ ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 5E Zinc Plate
111
ASME B18.24-2015
ASTM F1941—Electrodeposited Coatings on Threaded Fasteners/Zinc Iron Alloy Fe/Zn-Fe (Cont’d)
9S ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 8E Zinc Plate
1T ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 12E Zinc Plate
GK ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 1F [Note (1)] Zinc Plate
GL ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 2F [Note (1)] Zinc Plate
GM ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 3F Zinc Plate
GN ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 5F Zinc Plate
2T ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 8F Zinc Plate
3T ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Type 12F Zinc Plate
4T ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 3AT Zinc Plate
8T ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 3BT Zinc Plate
9T ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 5BT Zinc Plate
1U ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 8BT Zinc Plate
2U ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 12BT Zinc Plate
3U ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 3CT Zinc Plate
7U ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 3DT Zinc Plate
1W ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 12DT Zinc Plate
2W ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 3ET Zinc Plate
6W ASTM F1941, Zinc Iron Alloy Fe/Zn-Fe, Trivalent Chromate, Type 3FT Zinc Plate
112
ASME B18.24-2015
ASTM F1941M—Electrodeposited Coatings on Threaded Fasteners/Zinc Coating, Fe/Zn (Metric)
GP ASTM F1941M, Zinc Coating Fe/Zn, Type 3A Zinc Plate
GQ ASTM F1941M, Zinc Coating Fe/Zn, Type 3B Zinc Plate
GR ASTM F1941M, Zinc Coating Fe/Zn, Type 3C Zinc Plate
GS ASTM F1941M, Zinc Coating Fe/Zn, Type 3D Zinc Plate
GT ASTM F1941M, Zinc Coating Fe/Zn, Type 3E Zinc Plate
GU ASTM F1941M, Zinc Coating Fe/Zn, Type 3F Zinc Plate
GV ASTM F1941M, Zinc Coating Fe/Zn, Type 5A Zinc Plate
GW ASTM F1941M, Zinc Coating Fe/Zn, Type 5B Zinc Plate
GX ASTM F1941M, Zinc Coating Fe/Zn, Type 5C Zinc Plate
GY ASTM F1941M, Zinc Coating Fe/Zn, Type 5D Zinc Plate
GZ ASTM F1941M, Zinc Coating Fe/Zn, Type 5E Zinc Plate
H0 ASTM F1941M, Zinc Coating Fe/Zn, Type 5F Zinc Plate
H1 ASTM F1941M, Zinc Coating Fe/Zn, Type 8A Zinc Plate
H2 ASTM F1941M, Zinc Coating Fe/Zn, Type 8B Zinc Plate
H3 ASTM F1941M, Zinc Coating Fe/Zn, Type 8C Zinc Plate
H4 ASTM F1941M, Zinc Coating Fe/Zn, Type 8D Zinc Plate
H5 ASTM F1941M, Zinc Coating Fe/Zn, Type 8E Zinc Plate
H6 ASTM F1941M, Zinc Coating Fe/Zn, Type 8F Zinc Plate
H7 ASTM F1941M, Zinc Coating Fe/Zn, Type 12A Zinc Plate
H8 ASTM F1941M, Zinc Coating Fe/Zn, Type 12B Zinc Plate
H9 ASTM F1941M, Zinc Coating Fe/Zn, Type 12C Zinc Plate
HA ASTM F1941M, Zinc Coating Fe/Zn, Type 12D Zinc Plate
HB ASTM F1941M, Zinc Coating Fe/Zn, Type 12E Zinc Plate
HC ASTM F1941M, Zinc Coating Fe/Zn, Type 12F Zinc Plate
ASTM F1941M—Electrodeposited Coatings on Threaded Fasteners/Cadmium Coating, Fe/Cd (Metric)
HD ASTM F1941M, Cadmium Coating Fe/Cd, Type 3A Cadmium Plate
HE ASTM F1941M, Cadmium Coating Fe/Cd, Type 3B Cadmium Plate
HF ASTM F1941M, Cadmium Coating Fe/Cd, Type 3C Cadmium Plate
HG ASTM F1941M, Cadmium Coating Fe/Cd, Type 3D Cadmium Plate
HH ASTM F1941M, Cadmium Coating Fe/Cd, Type 3E Cadmium Plate
HJ ASTM F1941M, Cadmium Coating Fe/Cd, Type 3F Cadmium Plate
HK ASTM F1941M, Cadmium Coating Fe/Cd, Type 5A Cadmium Plate
113
ASME B18.24-2015
ASTM F1941M—Electrodeposited Coatings on Threaded Fasteners/Cadmium Coating, Fe/Cd (Metric) (Cont’d)
HL ASTM F1941M, Cadmium Coating Fe/Cd, Type 5B Cadmium Plate
HM ASTM F1941M, Cadmium Coating Fe/Cd, Type 5C Cadmium Plate
HN ASTM F1941M, Cadmium Coating Fe/Cd, Type 5D Cadmium Plate
HP ASTM F1941M, Cadmium Coating Fe/Cd, Type 5E Cadmium Plate
HQ ASTM F1941M, Cadmium Coating Fe/Cd, Type 5F Cadmium Plate
HR ASTM F1941M, Cadmium Coating Fe/Cd, Type 8A Cadmium Plate
HS ASTM F1941M, Cadmium Coating Fe/Cd, Type 8B Cadmium Plate
HT ASTM F1941M, Cadmium Coating Fe/Cd, Type 8C Cadmium Plate
HU ASTM F1941M, Cadmium Coating Fe/Cd, Type 8D Cadmium Plate
HV ASTM F1941M, Cadmium Coating Fe/Cd, Type 8E Cadmium Plate
HW ASTM F1941M, Cadmium Coating Fe/Cd, Type 8F Cadmium Plate
HX ASTM F1941M, Cadmium Coating Fe/Cd, Type 12A Cadmium Plate
HY ASTM F1941M, Cadmium Coating Fe/Cd, Type 12B Cadmium Plate
HZ ASTM F1941M, Cadmium Coating Fe/Cd, Type 12C Cadmium Plate
J0 ASTM F1941M, Cadmium Coating Fe/Cd, Type 12D Cadmium Plate
J1 ASTM F1941M, Cadmium Coating Fe/Cd, Type 12E Cadmium Plate
J2 ASTM F1941M, Cadmium Coating Fe/Cd, Type 12F Cadmium Plate
ASTM F1941M—Electrodeposited Coatings on Threaded Fasteners/Zinc Cobalt Alloy, Fe/Zn-Co (Metric)
J3 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 3A Zinc Plate
J4 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 3B Zinc Plate
J5 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 3C Zinc Plate
J6 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 3D Zinc Plate
J7 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 3E Zinc Plate
J8 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 3F Zinc Plate
J9 ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 5A Zinc Plate
JA ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 5B Zinc Plate
JB ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 5C Zinc Plate
JC ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 5D Zinc Plate
JD ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 5E Zinc Plate
JE ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 5F Zinc Plate
JF ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 8A Zinc Plate
JG ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 8B Zinc Plate
114
ASME B18.24-2015
ASTM F1941M—Electrodeposited Coatings on Threaded Fasteners/Zinc Cobalt Alloy, Fe/Zn-Co (Metric) (Cont’d)
JH ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 8C Zinc Plate
JJ ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 8D Zinc Plate
JK ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 8E Zinc Plate
JL ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 8F Zinc Plate
JM ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 12A Zinc Plate
JN ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 12B Zinc Plate
JP ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 12C Zinc Plate
JQ ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 12D Zinc Plate
JR ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 12E Zinc Plate
JS ASTM F1941M, Zinc Cobalt Alloy Fe/Zn-Co, Type 12F Zinc Plate
ASTM F1941M–Electrodeposited Coatings on Threaded Fasteners/Zinc Nickel Alloy, Fe/Zn-Ni (Metric)
JT ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 3A Zinc Plate
JU ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 3B Zinc Plate
JV ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 3C Zinc Plate
JW ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 3D Zinc Plate
JX ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 3E Zinc Plate
JY ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 3F Zinc Plate
JZ ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 5A Zinc Plate
K0 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 5B Zinc Plate
K1 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 5C Zinc Plate
K2 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 5D Zinc Plate
K3 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 5E Zinc Plate
K4 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 5F Zinc Plate
K5 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 8A Zinc Plate
K6 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 8B Zinc Plate
K7 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 8C Zinc Plate
K8 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 8D Zinc Plate
K9 ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 8E Zinc Plate
KA ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 8F Zinc Plate
KB ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 12A Zinc Plate
KC ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 12B Zinc Plate
KD ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 12C Zinc Plate
115
ASME B18.24-2015
ASTM F1941M–Electrodeposited Coatings on Threaded Fasteners/Zinc Nickel Alloy, Fe/Zn-Ni (Metric) (Cont’d)
KE ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 12D Zinc Plate
KF ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 12E Zinc Plate
KG ASTM F1941M, Zinc Nickel Alloy Fe/Zn-Ni, Type 12F Zinc Plate
ASTM F1941M–Electrodeposited Coatings on Threaded Fasteners/Zinc Iron Alloy, Fe/Zn-Fe (Metric)
KH ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 3A Zinc Plate
KJ ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 3B Zinc Plate
KK ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 3C Zinc Plate
KL ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 3D Zinc Plate
KM ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 3E Zinc Plate
KN ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 3F Zinc Plate
KP ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 5A Zinc Plate
KQ ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 5B Zinc Plate
KR ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 5C Zinc Plate
KS ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 5D Zinc Plate
KT ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 5E Zinc Plate
KU ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 5F Zinc Plate
KV ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 8A Zinc Plate
KW ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 8B Zinc Plate
KX ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 8C Zinc Plate
KY ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 8D Zinc Plate
KZ ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 8E Zinc Plate
L0 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 8F Zinc Plate
L1 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 12A Zinc Plate
L2 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 12B Zinc Plate
L3 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 12C Zinc Plate
L4 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 12D Zinc Plate
L5 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 12E Zinc Plate
L6 ASTM F1941M, Zinc Iron Alloy Fe/Zn-Fe, Type 12F Zinc Plate
ASTM F2329—Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special
Threaded Fasteners
M2 ASTM F2329 Hot-Dip Zinc Coating
116
ASME B18.24-2015
ASTM F2833—Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
M3 ASTM F2833, Grade 1 Zinc/Aluminum Coating
NOTE:
(1) Strike-through text denotes obsolete fasteners or characteristics, but are left in this document for reference and for use in deciphering
older PIN codes.
Table 6-3 Plating, Coating, and Passivation: Government Finish Specifications

MIL–DTL–13924D–Coating, Oxide, Black for Ferrous Metals
L7 MIL-DTL-13924D, Class 1 Black Oxide Coating
MIL–DTL–16232G–Phosphate Coatings, Heavy Manganese or Zinc Base (for Ferrous Metals)
LA MIL-DTL-16232, Type M, Class 1 Phosphate Coating
LB MIL-DTL-16232, Type M, Class 2 Phosphate Coating
LC MIL-DTL-16232, Type M, Class 3 Phosphate Coating
LD MIL-DTL-16232, Type M, Class 4 Phosphate Coating
LE MIL-DTL-16232, Type Z, Class 1 Phosphate Coating
LF MIL-DTL-16232, Type Z, Class 2 Phosphate Coating
LG MIL-DTL-16232, Type Z, Class 3 Phosphate Coating
LH MIL-DTL-16232, Type Z, Class 4 Phosphate Coating
MIL–F–495E–Finish, Chemical, Black, for Copper Alloys
LJ MIL-F-495E Black Oxide Coating
Table 6-4 Plating, Coating, and Passivation: SAE Finish Specifications

SAE AMS–QQ–N–290–Nickel Plating (Electrodeposited)
LK SAE-AMS-QQ-N-290, Class 1, Grade E Nickel Coating
LL SAE-AMS-QQ-N-290, Class 1, Grade F Nickel Coating
LM SAE-AMS-QQ-N-290, Class 1, Grade G Nickel Coating
117
ASME B18.24-2015
Table 6-4 Plating, Coating, and Passivation: SAE Finish Specifications (Cont’d)
SAE AMS–QQ–P–35–Passivation Treatments for Corrosion Resistant Steel
LN SAE-AMS-QQ-P-35, Type II Passivate
LP SAE-AMS-QQ-P-35, Type VI Passivate
LQ SAE-AMS-QQ-P-35, Type VII Passivate
LR SAE-AMS-QQ-P-35, Type VIII Passivate
SAE AMS–QQ–P–416–Plating, Cadmium (Electrodeposited)
LS SAE-AMS-QQ-P-416, Type I, Class 1 Cadmium Plate
LT SAE-AMS-QQ-P-416, Type I, Class 2 Cadmium Plate
LU SAE-AMS-QQ-P-416, Type I, Class 3 Cadmium Plate
LV SAE-AMS-QQ-P-416, Type II, Class 1 Cadmium Plate
LW SAE-AMS-QQ-P-416, Type II, Class 2 Cadmium Plate
LX SAE-AMS-QQ-P-416, Type II, Class 3 Cadmium Plate
LY SAE-AMS-QQ-P-416, Type III, Class 1 Cadmium Plate
LZ SAE-AMS-QQ-P-416, Type III, Class 2 Cadmium Plate
SAE AS5272–Lubricant, Solid Film, Heat Cured Corrosion Inhibiting
M0 SAE AS5272, Type I Solid Film Lubricant
M1 SAE AS5272, Type II Solid Film Lubricant
Table 6-5 Plating, Coating, and Passivation: ISO Finish Specifications

ISO 10683–Non Electrolytically Applied Zinc Flake Coatings
QA ISO 10683, flZn–240h Zinc Coating
QB ISO 10683, flZnL–240h Zinc Coating
QC ISO 10683, flZn–240h–L Zinc Coating
QD ISO 10683, flZnnc–240h Zinc Coating
QE ISO 10683, flZnyc–240h Zinc Coating
QF ISO 10683, flZn–480h Zinc Coating
QG ISO 10683, flZnL–480h Zinc Coating
QH ISO 10683, flZn–480h–L Zinc Coating
QJ ISO 10683, flZnnc–480h Zinc Coating
QK ISO 10683, flZnyc–480h Zinc Coating
118
ASME B18.24-2015
Table 6-5 Plating, Coating, and Passivation: ISO Finish Specifications (Cont’d)
ISO 10683–Non Electrolytically Applied Zinc Flake Coatings (Cont’d)
QL ISO 10683, flZn–720h Zinc Coating
QM ISO 10683, flZnL–720h Zinc Coating
QN ISO 10683, flZn–720h–L Zinc Coating
QP ISO 10683, flZnnc–720h Zinc Coating
QQ ISO 10683, flZnyc–720h Zinc Coating
QR ISO 10683, flZn–960h Zinc Coating
QS ISO 10683, flZnL–960h Zinc Coating
QT ISO 10683, flZn–960h–L Zinc Coating
QU ISO 10683, flZnnc–960h Zinc Coating
QV ISO 10683, flZnyc–960h Zinc Coating
119
ASME B18.24-2015
Table 7-1 Plain: No Additional Features Table 7-7 Cotter Pin Type
PIN Description PIN Description
1 No Additional Features
1 Extended Prong Type
2 Hammer Lock Type

Table 7-2 Miscellaneous Features for Externally
Threaded Fasteners
PIN Description
1 Plain End—No Additional Features Table 7-8 Pin Type

2 Pointed—No Additional Features PIN Description
6 Plain End—Optional-Type Self-Locking 1 Chamfered Straight
7 Plain End—Drilled Head 2 Square End Straight
B Plain End—Optional-Type Self-Locking Element, Drilled Head
C Plain End—Drilled Shank

Table 7-9 SEMs Washer Components
G Pointed—Optional-Type Self-Locking Element
PIN Description
H Pointed—Drilled Head
1 Helical Spring Lock Washer Component
M Pointed—Optional-Type Self-Locking Element, Drilled Head
2 External Tooth Lock Washer Component
N Pointed—Drilled Shank
3 Internal Tooth Lock Washer Component
P As specified by the purchaser
4 Type L Narrow Conical Spring Washer Component
5 Type L Regular Conical Spring Washer Component

Table 7-3 General Point Options
PIN Description 6 Type L Wide Conical Spring Washer Component
1 Plain End 7 Type H Narrow Conical Spring Washer Component
2 Header Point 8 Type H Regular Conical Spring Washer Component
9 Type H Wide Conical Spring Washer Component

Table 7-4 Features for Metric Flange Screws A Plain Narrow Washer Component
PIN Description
B Plain Regular Washer Component
2 Header Point, Type F Fillet
C Plain Wide Washer Component
4 Header Point, Type U Fillet
Table 7-5 Features for Metric 12-Spline Screws Table 7-10 Wood Screw Thread Types
PIN Description PIN Description
2 Header Point, Type A Fillet C Cut Thread Wood Screws
4 Header Point, Type B Fillet R Rolled Thread Wood Screws
P Cut or Rolled Thread Wood Screws
Table 7-6 Neck Options for Large Rivets

PIN Description
1 Straight Shank to Head
2 Swell Neck
120
ASME B18.24-2015
Table 7-11 Miscellaneous Features for Socket Table 7-13 Thread Class for Track Bolts and Nuts
Head Cap Screws PIN Description
PIN Description
A Free Fit
1 Undrilled Head, No Additional Features
B Wrench Turn Fit
6 Undrilled Head, Optional-Type Self-Locking Element
I No Additional Features
7 2 Drilled Head Holes, No Additional Features
B 2 Drilled Head Holes, Optional-Type Self-Locking Element
C 4 Drilled Head Holes, No Additional Features

Table 7-14 Alternate Points for Thumb and Wing
G 4 Drilled Head Holes, Optional-Type Self-Locking Element Screws (ASME B18.6.8)
H 6 Drilled Head Holes, No Additional Features PIN Description
M 6 Drilled Head Holes, Optional-Type Self-Locking Element A Cup Point
P As specified by the purchaser B Cone Point
C Oval Point
D Flat Point
E Dog Point
Table 7-12 Self-Locking Elements for Set Screws
P Plain, Sheared
PIN Description
1 No Additional Features
6 Optional-Type Self-Locking Element
P As specified by the purchaser
121
INTENTIONALLY LEFT BLANK
122
ASME B18.24-2015
NONMANDATORY APPENDIX A
B18.24.1, B18.24.2, AND B18.24.3
PIN SUCCESSION INSTRUCTIONS
These instructions are meant for use with the work- “Bxxx-x” format (table-field length) e.g., B136-1 rather
sheet in Fig. A-1. Following that is a 21-digit PIN succes- than the “[B-xxx]x,” format in Tables B-2 and B-3. For
sion example. example, [B-136] 1.
(1) Enter cancelled 21 digit PIN. (8) Demarcate remaining fields according to “next
(2) Demarcate digit 1 (field 1) PIN. length” values starting from cell A3 downward.
(3) Based on resolved logic for digit 1, enter the appli- (9) Enter remaining demarcated field values by listing
cable “next table” value in cell A2 and the “table pg#” them vertically from cell B3 downward.
(10) Enter the page numbers vertically beginning
value in cell C2.
from cell C3 downward.
(4) Demarcate the next 6 or 7 digits (field 2 value) as
(11) Look up PIN18 values for tables listed in column
applicable from “next length” value in cell A2.
A starting from A3 downward. Enter PIN18 values into
(5) Enter field 2 PIN21 value into cell B2. column D.
(6) Look up cell B2 PIN21 value in Table B-2 or B-3, (12) Transpose vertical PIN18 values from column D
as applicable. Enter resolved PIN18 value into cell D2. horizontally to “AE” entry field at bottom of worksheet.
(7) Enter table references by listing them vertically This resolves the cancelled B18.24.1-3 PIN to a supersed-
into worksheet beginning from cell A3. Use the simpler ing 18 digit B18.24 PIN.
123
ASME B18.24-2015
Fig. A-1(a) Instructions Fig. A-1(b) Instructions

Blank 21 to 18 Digit Conversion Worksheet. Step (1) Enter cancelled 21 digit PIN.
Enter cancelled 21 digit PIN Enter cancelled 21 digit PIN
if digit 1 above = B, M, S, or T if digit 1 above = B, M, S, or T

then cell A2 below has a value of B2-7 then cell A2 below has a value of B2-7
if digit 1 above = E, N, P, R, V, or W if digit 1 above = E, N, P, R, V, or W
A B C D A B C D
next—next table next—next table

table—length PIN21 pg.no. PIN18 table—length PIN21 pg.no. PIN18
1 AE 1 AE
2 2
3 3
4 4
5 5
6 6
7 7
AE AE
18 digit B18.24 superseding PIN 18 digit B18.24 superseding PIN
Fig. A-1(c) Instructions Fig. A-1(d) Instructions
Step (2) Demarcate digit 1 (field 1) PIN. Step (3) Based on resolved logic for digit 1, enter
the applicable “next table” value in cell A2 and the
B 210NA01CAD16468GAAB 1 correct pg. no. in cell C2 from the Table of Contents.
Enter cancelled 21 digit PIN B 210NA01CAD16468GAAB 1

if digit 1 above = B, M, S, or T Enter cancelled 21 digit PIN
then cell A2 below has a value of 102-7
if digit 1 above = E, N, P, R, V, or W if digit 1 above = B, M, S, or T
then cell A2 below has a value of 103-6 then cell A2 below has a value of 102-7
if digit 1 above = E, N, P, R, V, or W
A B C D then cell A2 below has a value of 103-6
next—next table
A B C D
table—length PIN21 pg.no. PIN18
next— next table
1 AE
table— length PIN21 pg.no. PIN18
2
1 B2-7 122 AE
3
2
4
3
5
4
6
5
7
6
AE 7
18 digit B18.24 superseding PIN
AE
124
ASME B18.24-2015
Fig. A-1(e) Instructions Fig. A-1(f) Instructions

Step (4) Demarcate the next 6 or 7 digits (field 2 Step (5) Enter field 2 PIN21 value into cell B2.
value) as applicable from “next length” value in
cell A2. B 210NA01 CAD16468GAAB 1
B 210NA01 CAD16468GAAB1 Enter cancelled 21 digit PIN
Enter cancelled 21 digit PIN if digit 1 above = B, M, S, or T

then cell A2 below has a value of B2-7
if digit 1 above = B, M, S, or T if digit 1 above = E, N, P, R, V, or W
A B C D
next—next table
A B C D
next—next table
1 B 2-7 210NA01 122 AE
2
1 B 2-7 122 AE
3
2
4
3
5
4
6
5
7
6
7 AE
AE Fig. A-1(h) Instructions
18 digit B18.24 superseding PIN Step (7) Enter table references from table by listing
Fig. A-1(g) Instructions them vertically into worksheet beginning from cell
Step (6) Look up cell B2 PIN21 value in Table B-2 or A3. Use the simpler xxx-x format rather than the
B-3, as applicable. Enter resolved PIN18 value into [B-xxx]x format used in Tables B-2 and B-3.
cell D2.
B 210NA01 CAD16468GAAB 1
B 210NA01 CAD16468GAAB 1
Enter cancelled 21 digit PIN
if digit 1 above = B, M, S, or T
if digit 1 above = B, M, S, or T then cell A2 below has a value of B2-7
then cell A2 below has a value of B2-7 if digit 1 above = E, N, P, R, V, or W
if digit 1 above = E, N, P, R, V, or W then cell A2 below has a value of B3-6
A B C D
A B C D
next—next table
next—next table table—length PIN21 pg.no. PIN18
1 B 2-7 210NA01 122 A E B0 3
1 B 2-7 210NA01 122 A E B0 3 2 B 4-1
2
3 B 6-2
3
4 B 11-2
4
5 B 134 -5
5
6 B 136 -2
6
7 B 137 -1
7
AE
AE 18 digit B18.24 superseding PIN
125
ASME B18.24-2015
Fig. A-1(i) Instructions Fig. A-1(j) Instructions

Step (8) Demarcate remaining fields according to Step (9) Enter remaining demarcated field values by
“next length” values starting from cell A3 downward. listing them vertically from cell B3 downward.
B 210NA01 C AD 16 468GA AB 1 B 210NA01 C AD 16 468GA AB 1


A B C D A B C D

1 B 2-7 210NA01 122 A E B0 3 1 B 2-7 210NA01 AE BO 3

2 B 4-1 2 B 4-1 C
3 B 6-2 3 B 6-2 AD
4 B 11-2 4 B 11-2 16
5 B 134-5 5 B 134 -5 468GA
6 B 136-2 6 B 136 -2 AB
7 B 137-1 7 B 137 -1 1
AE AE
Fig. A-1(k) Instructions Fig. A-1(l) Instructions
Step (10) Look up page numbers from Table of Step (11) Look up PIN18 values for tables listed in
Contents. Enter them vertically beginning from column A starting from A3 downward. Enter PIN18
cell C3 downward. values into column D.
B 210NA01 C AD 16 468GA AB 1 B 210NA01 C AD 16 468GA AB 1


A B C D A B C D

1 B 2-7 210NA01 x AE BO3 1 B 2-7 210NA01 AE BO 3

2 B 4-1 C x 2 B 4-1 C x C
3 B 6-2 AD x 3 B 6-2 AD x 250
4 B 11-2 16 x 4 B 11-2 16 x 875
5 B 134-5 468GA x 5 B 134 -5 468GA x BV5
6 B 136 -2 AB x 6 B 136 -2 AB x A2
7 B 137-1 1 x 7 B 137 -1 1 x 1
AE AE
126
ASME B18.24-2015
Fig. A-1(m) Instructions

Step (12) Transpose vertical PIN18 values from
column D horizontally to “AE” entry field at bottom
of worksheet. This resolves the cancelled B18.24.1-3
PIN to a superseding 18 digit B18.24.4 PIN.
B 210NA01 C AD 16 468GA AB 1
if digit 1 above = B, M, S, or T
A B C D
next—next table
1 B 2-7 210NA01 x AE BO 3
2 B 4-1 C x C
3 B 6-2 AD x 250
4 B 11-2 16 x 875
5 B 134-5 468GA x BV5
6 B 136-2 AB x A2
7 B 137-1 1 x 1
A E B02C250875BV5A2 1
127
ASME B18.24-2015
NONMANDATORY APPENDIX B
B18.24.1, B18.24.2, AND B18.24.3 PIN SUCCESSION TABLES
Table B-1 Fastener Family

Digit 1 Source Description Next PIN
A B18.24 18 Digit PIN Use B18.24 Tables

B B18.24.1 Bolts [B2] 7,
E B18.24.2 Inserts [B3] 6,
K B18.24.3 Keys and Keysets [B3] 6,
M B18.24.1 Screw and Washer Assemblies: SEMs [B2] 7,
N B18.24.2 Nuts [B3] 6,
P B18.24.3 Pins [B3] 6,
R B18.24.3 Retaining Rings [B3] 6,
S B18.24.1 Screws [B2] 7,
T B18.24.1 Studs [B2] 7,
V B18.24.3 Rivets [B3] 6,
W B18.24.3 Washers [B3] 6,
Table B-2 Fastener Type: Externally Threaded

PIN21 PIN18 Table References
100NA28 AEB32 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
100NA29 AEB33 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
110NG83 AESZG [B-4]1,[B-10]2,[B-13]2,[B-134]5,[B-136]2,[B-137]1,
110NG84 AESZH [B-4]1,[B-10]2,[B-13]2,[B-134]5,[B-136]2,[B-137]1,
110NG85 AESZJ [B-4]1,[B-10]2,[B-13]2,[B-134]5,[B-136]2,[B-137]1,
110NG86 AESZK [B-4]1,[B-10]2,[B-13]2,[B-134]5,[B-136]2,[B-137]1,
130NG11 AEMF4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG12 AEMF5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG13 AEMF6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG14 AEMF7 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG15 AEMQ9 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG16 AEMR0 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG17 AEMR1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG18 AEMR2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG19 AEMS1 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG20 AEMT9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG21 AEM01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG22 AEMQ1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG23 AEMQ2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG24 AEMQ3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG25 AEMQ4 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG30 AEMS1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG31 AEMT9 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG32 AEM14 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-158]1,
130NG33 AEMF4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG34 AEMF5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG35 AEMF6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG36 AEMF7 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
128
ASME B18.24-2015
Table B-2 Fastener Type: Externally Threaded (Cont’d)

130NG37 AEMQ9 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG38 AEMR0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG39 AEMR1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG40 AEMR2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG41 AEMS1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG42 AEMT9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG43 AEM01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-160]1,
130NG44 AEMC0 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG45 AEMC1 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG46 AEMC2 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG47 AEMC3 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG48 AEMN0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG49 AEMN1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG50 AEMN2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG51 AEMN3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG52 AEMQ1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG53 AEMQ2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG54 AEMQ3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG55 AEMQ4 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG56 AEMQ1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG57 AEMQ2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG58 AEMQ3 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG59 AEMQ4 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG60 AEMT9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG61 AEM01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-159]1,
130NG62 AEMQ1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG63 AEMQ2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG64 AEMQ3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG65 AEMQ4 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG66 AEMQ9 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG67 AEMR0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG68 AEMR1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG69 AEMR2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-162]1,
130NG72 AEM01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-165]1,
130NG73 AEMF4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-168]1,
130NG74 AEMF5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-168]1,
130NG75 AEMF6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-168]1,
130NG76 AEMF7 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-168]1,
130NG77 AEMQ1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-167]1,
130NG78 AEMQ2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-167]1,
130NG79 AEMQ3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-167]1,
130NG80 AEMQ4 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-167]1,
130NG81 AEMS1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-167]1,
130NG82 AEMT9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-169]1,
130NG83 AEM01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-168]1,
131NG11 AEMZ1 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG12 AEMZ2 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG13 AEMZ3 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG19 AEMX1 [B-147]1,[B-152]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG20 AEMX7 [B-149]1,[B-152]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG21 AEM07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG22 AEMW4 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG23 AEMW5 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG24 AEMW6 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG30 AEMX1 [B-141]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG31 AEMX7 [B-144]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG32 AEM43 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-158]1,
131NG33 AEMZ1 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-160]1,
131NG34 AEMZ2 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-160]1,
131NG35 AEMZ3 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-160]1,
131NG41 AEMX1 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-160]1,
131NG42 AEMX7 [B-149]1,[B-152]2,[B-12]2,[B-134]5,[B-136]2,[B-160]1,
129
ASME B18.24-2015

131NG43 AEM07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-160]1,
131NG44 AEMV3 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG45 AEMV4 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG46 AEMV5 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG48 AEMW0 [B-141]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG49 AEMW1 [B-141]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG50 AEMW2 [B-141]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG52 AEMW4 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG53 AEMW5 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG54 AEMW6 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG60 AEMX7 [B-149]1,[B-152]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG61 AEM07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-159]1,
131NG62 AEMW4 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-162]1,
131NG63 AEMW5 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-162]1,
131NG64 AEMW6 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-162]1,
131NG71 AEMX7 [B-141]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-162]1,
131NG72 AEM07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-165]1,
131NG73 AEMZ1 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-168]1,
131NG74 AEMZ2 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-168]1,
131NG75 AEMZ3 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-168]1,
131NG81 AEMX1 [B-140]1,[B-151]2,[B-12]2,[B-134]5,[B-136]2,[B-167]1,
131NG82 AEMX7 [B-149]1,[B-152]2,[B-12]2,[B-134]5,[B-136]2,[B-169]1,
131NG83 AEM07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-169]1,
151NG09 AET05 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
152NG10 AET06 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
210NA00 AEB02 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA01 AEB03 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA09 AEB01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA38 AES01 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA48 AES02 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA50 AES03 [B-4]1,[B-157]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA51 AES04 [B-4]1,[B-157]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA52 AES05 [B-4]1,[B-157]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
210NA53 AES06 [B-4]1,[B-157]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
2310A09 AEB08 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
231NA38 AES07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
234NG07 AES10 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
235NA00 AEB05 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
236NA01 AEB06 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
237NA06 AEB07 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
238NA52 AES11 [B-171]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
239NG08 AES12 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
260NA06 AEB09 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
271NB45 AES13 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
300NA42 AES14 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NA43 AES15 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NA44 AES16 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NA45 AES17 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NA46 AES18 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NA47 AES19 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB08 AES22 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB09 AES23 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB10 AES24 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB11 AES25 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB12 AES26 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB13 AES28 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB14 AES29 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB15 AES30 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB16 AES31 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB17 AES32 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB18 AES33 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB19 AES34 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
130
ASME B18.24-2015

300NB20 AES35 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB21 AES36 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB22 AES37 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB23 AES39 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB24 AES40 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB25 AES41 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NB26 AES42 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
300NS30 AES21 [B-4]1,[B-155]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
310NA42 AES43 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
310NA43 AES44 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
340NA46 AES46 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB13 AES53 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB14 AES54 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB15 AES55 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB16 AES56 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB23 AES62 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB24 AES63 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB25 AES64 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
360NB26 AES65 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
500NA17 AEB10 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA18 AEB16 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA19 AEB18 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA20 AEB14 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA21 AEB13 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA22 AEB11 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA23 AEB12 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA24 AEB19 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA27 AEB15 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NA37 AEB20 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
500NAA1 AEB17 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
521NA23 AEB21 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
522NA22 AEB22 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
610NB46 AES66 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB47 AES67 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB48 AES68 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB49 AES69 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB50 AES70 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB51 AES71 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB52 AES72 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
610NB53 AES73 [B-4]1,[B-156]2,[B-11]2,[B-134]5,[B-136]2,[B-172]1,
620NA39 AES78 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NA40 AES80 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NA41 AES79 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB27 AES93 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB28 AES94 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB29 AES95 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB30 AES96 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB31 AES97 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB32 AES98 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB33 AES81 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB34 AES82 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB35 AES83 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB36 AES84 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB37 AES85 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB38 AES86 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB39 AES87 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB40 AES88 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB41 AES89 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB42 AES90 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB43 AES91 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
620NB44 AES92 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA54 AESH5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
131
ASME B18.24-2015

630NA55 AESH6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA56 AESH8 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA57 AESG7 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA58 AESG2 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA59 AESG3 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA60 AESG4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA61 AESG5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA62 AESC0 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA63 AESC1 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA64 AESC2 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA65 AESC3 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA69 AESD8 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA70 AESD9 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA71 AESE0 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA72 AESE1 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA73 AESC5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA74 AESC6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA75 AESC8 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA76 AESC9 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA77 AESD0 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA78 AESD2 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA83 AESK9 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA84 AESK8 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA85 AESD3 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA86 AESD4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA87 AESD5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA88 AESD6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA89 AESE3 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA90 AESE4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA91 AESE5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA92 AESE6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA96 AESL4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA97 AESL5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA98 AESL7 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NA99 AESF4 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB00 AESF5 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB01 AESF6 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB02 AESF7 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB03 AESG8 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB04 AESG9 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB05 AESH1 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
630NB06 AESH0 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB57 AESQ9 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB58 AESQ9 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB59 AESQ9 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB60 AESQ9 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB61 AESQ9 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB62 AESQ9 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB63 AESQ9 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB64 AESQ9 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB65 AESQ9 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB66 AESQ9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB67 AESR0 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB68 AESR0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB69 AESR0 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB70 AESR0 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB71 AESR0 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB72 AESR0 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB73 AESR0 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB74 AESR0 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB75 AESR0 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB76 AESR0 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
132
ASME B18.24-2015

640NB77 AESR1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB78 AESR1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB79 AESR1 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB80 AESR1 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB81 AESR1 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB82 AESR1 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB83 AESR1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB84 AESR1 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB85 AESR1 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB86 AESR1 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB87 AESR2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB88 AESR2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB89 AESR2 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB90 AESR2 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB91 AESR2 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB92 AESR2 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB93 AESR2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB94 AESR2 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB95 AESR2 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB96 AESR2 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB97 AESM1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB98 AESM1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NB99 AESM1 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC00 AESM1 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC01 AESM1 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC02 AESM1 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC03 AESM1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC04 AESM1 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC05 AESM1 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC06 AESM1 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC07 AESM2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC08 AESM2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC09 AESM2 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC10 AESM2 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC11 AESM2 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC12 AESM2 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC13 AESM2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC14 AESM2 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC15 AESM2 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC16 AESM2 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC17 AESM3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC18 AESM3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC19 AESM3 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC20 AESM3 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC21 AESM3 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC22 AESM3 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC23 AESM3 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC24 AESM3 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC25 AESM3 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC26 AESM3 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC27 AESM4 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC28 AESM4 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC29 AESM4 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC30 AESM4 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC31 AESM4 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC32 AESM4 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC33 AESM4 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC34 AESM4 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC35 AESM4 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC36 AESM4 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC37 AESN5 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC38 AESN5 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
133
ASME B18.24-2015

640NC39 AESN5 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC40 AESN5 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC41 AESN5 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC42 AESN5 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC43 AESN5 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC44 AESN5 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC45 AESN5 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC46 AESN5 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC47 AESN6 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC48 AESN6 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC49 AESN6 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC50 AESN6 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC51 AESN6 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC52 AESN6 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC53 AESN6 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC54 AESN6 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC55 AESN6 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC56 AESN6 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC57 AESN7 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC58 AESN7 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC59 AESN7 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC60 AESN7 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC61 AESN7 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC62 AESN7 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC63 AESN7 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC64 AESN7 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC65 AESN7 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC66 AESN7 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC67 AESN8 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC68 AESN8 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC69 AESN8 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC70 AESN8 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC71 AESN8 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC72 AESN8 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC73 AESN8 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC74 AESN8 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC75 AESN8 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC76 AESN8 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC77 AESP5 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC78 AESP5 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC79 AESP5 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC80 AESP5 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC81 AESP5 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC82 AESP5 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC83 AESP5 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC84 AESP5 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC85 AESP5 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC86 AESP5 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC87 AESP6 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC88 AESP6 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC89 AESP6 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC90 AESP6 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC91 AESP6 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC92 AESP6 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC93 AESP6 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC94 AESP6 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC95 AESP6 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC96 AESP6 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC97 AESP7 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC98 AESP7 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NC99 AESP7 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND00 AESP7 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
134
ASME B18.24-2015

640ND01 AESP7 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND02 AESP7 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND03 AESP7 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND04 AESP7 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND05 AESP7 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND06 AESP7 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND07 AESM6 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND08 AESM6 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND09 AESM6 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND10 AESM6 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND11 AESM6 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND12 AESM6 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND13 AESM6 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND14 AESM6 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND15 AESM6 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND16 AESM6 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND17 AESM8 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND18 AESM8 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND19 AESM8 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND20 AESM8 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND21 AESM8 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND22 AESM9 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND23 AESM9 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND24 AESM9 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND25 AESM9 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND26 AESM9 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND27 AESS4 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND28 AESS4 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND29 AESS4 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND30 AESS4 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND31 AESS4 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND32 AESS4 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND33 AESS4 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND34 AESS4 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND35 AESS4 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND36 AESS4 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND37 AESS3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND38 AESS3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND39 AESS3 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND40 AESS3 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND41 AESS3 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND42 AESS3 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND43 AESS3 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND44 AESS3 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND45 AESS3 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND46 AESS3 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND47 AESS6 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND48 AESS6 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND49 AESS6 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND50 AESS6 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND51 AESS6 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND52 AESS6 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND53 AESS6 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND54 AESS6 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND55 AESS6 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND56 AESS6 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND57 AESS5 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND58 AESS5 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND59 AESS5 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND60 AESS5 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND61 AESS5 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND62 AESS5 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
135
ASME B18.24-2015

640ND63 AESS5 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND64 AESS5 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND65 AESS5 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND66 AESS5 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND67 AESU0 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND68 AESU0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND69 AESU0 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND70 AESU0 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND71 AESU0 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND72 AESU0 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND73 AESU0 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND74 AESU0 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND75 AESU0 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND76 AESU0 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND77 AEST9 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND78 AEST9 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND79 AEST9 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND80 AEST9 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND81 AEST9 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND82 AEST9 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND83 AEST9 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND84 AEST9 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND85 AEST9 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND86 AEST9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND87 AESN0 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND88 AESN0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND89 AESN0 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND90 AESN0 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND91 AESN0 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND92 AESN0 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND93 AESN0 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND94 AESN0 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND95 AESN0 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND96 AESN0 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND97 AESN1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND98 AESN1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640ND99 AESN1 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NDD0 AESM7 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NDD1 AESM7 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NDD2 AESM7 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NDD3 AESM7 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NDD4 AESM7 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE00 AESN1 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE01 AESN1 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE02 AESN1 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE03 AESN1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE04 AESN1 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE05 AESN1 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE06 AESN1 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE07 AESN2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE08 AESN2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE09 AESN2 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE10 AESN2 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE11 AESN2 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE12 AESN2 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE13 AESN2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE14 AESN2 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE15 AESN2 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE16 AESN2 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE17 AESN3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE18 AESN3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE19 AESN3 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
136
ASME B18.24-2015

640NE20 AESN3 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE21 AESN3 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE22 AESN3 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE23 AESN3 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE24 AESN3 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE25 AESN3 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE26 AESN3 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE27 AESP8 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE28 AESP8 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE29 AESP8 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE30 AESP8 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE31 AESP8 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE32 AESP8 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE33 AESP8 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE34 AESP8 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE35 AESP8 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE37 AESP9 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE38 AESP9 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE39 AESP9 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE40 AESP9 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE41 AESP9 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE42 AESP9 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE43 AESP9 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE44 AESP9 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE45 AESP9 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE46 AESP9 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE47 AESQ0 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE48 AESQ0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE49 AESQ0 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE50 AESQ0 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE51 AESQ0 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE52 AESQ0 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE53 AESQ0 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE54 AESQ0 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE55 AESQ0 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE56 AESQ0 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE57 AESP0 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE58 AESP0 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE59 AESP0 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE60 AESP0 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE61 AESP0 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE62 AESP0 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE63 AESP0 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE64 AESP0 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE65 AESP0 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE66 AESP0 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE67 AESP1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE68 AESP1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE69 AESP1 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE70 AESP1 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE71 AESP1 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE72 AESP1 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE73 AESP1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE74 AESP1 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE75 AESP1 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE76 AESP1 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE77 AESP2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE78 AESP2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE79 AESP2 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE80 AESP2 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE81 AESP2 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE82 AESP2 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
137
ASME B18.24-2015

640NE83 AESP2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE84 AESP2 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE85 AESP2 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE86 AESP2 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE87 AESP3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE88 AESP3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE89 AESP3 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE90 AESP3 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE91 AESP3 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE92 AESP3 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE93 AESP3 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE94 AESP3 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE95 AESP3 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE96 AESP3 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE97 AESQ1 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE98 AESQ1 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NE99 AESQ1 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF00 AESQ1 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF01 AESQ1 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF02 AESQ1 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF03 AESQ1 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF04 AESQ1 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF05 AESQ1 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF06 AESQ1 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF07 AESQ2 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF08 AESQ2 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF09 AESQ2 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF10 AESQ2 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF11 AESQ2 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF12 AESQ2 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF13 AESQ2 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF14 AESQ2 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF15 AESQ2 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF16 AESQ2 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF17 AESQ3 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF18 AESQ3 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF19 AESQ3 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF20 AESQ3 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF21 AESQ3 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF22 AESQ3 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF23 AESQ3 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF24 AESQ3 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF25 AESQ3 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF26 AESQ3 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF27 AESQ4 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF28 AESQ4 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF29 AESQ4 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF30 AESQ4 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF31 AESQ4 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF32 AESQ4 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF33 AESQ4 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF34 AESQ4 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF35 AESQ4 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF36 AESQ4 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF37 AESU5 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF38 AESU5 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF39 AESU5 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF40 AESU5 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF41 AESU5 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF42 AESU5 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF43 AESU5 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF44 AESU5 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
138
ASME B18.24-2015

640NF45 AESU5 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF46 AESU5 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF47 AESU6 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF48 AESU6 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF49 AESU6 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF50 AESU6 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF51 AESU6 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF52 AESU6 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF53 AESU6 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF54 AESU6 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF55 AESU6 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF56 AESU6 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF57 AESU8 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF58 AESU8 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF59 AESU8 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF60 AESU8 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF61 AESU8 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF62 AESU8 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF63 AESU8 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF64 AESU8 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF65 AESU8 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF66 AESU8 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF67 AESR4 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF68 AESR4 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF69 AESR4 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF70 AESR4 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF71 AESR4 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF72 AESR4 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF73 AESR4 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF74 AESR4 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF75 AESR4 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF76 AESR4 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF77 AESR5 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF78 AESR5 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF79 AESR5 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF80 AESR5 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF81 AESR5 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF82 AESR5 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF83 AESR5 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF84 AESR5 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF85 AESR5 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF86 AESR5 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF87 AESR6 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF88 AESR6 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF89 AESR6 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF90 AESR6 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF91 AESR6 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF92 AESR6 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF93 AESR6 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF94 AESR6 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF95 AESR6 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF96 AESR6 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF97 AESR7 [B-140]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF98 AESR7 [B-141]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NF99 AESR7 [B-142]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG00 AESR7 [B-143]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG01 AESR7 [B-144]1,[B-151]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG02 AESR7 [B-145]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG03 AESR7 [B-146]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG04 AESR7 [B-147]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG05 AESR7 [B-148]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
640NG06 AESR7 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
139
ASME B18.24-2015

640NG88 AESV2 [B-150]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
650NB97 AESV3 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NB98 AESV3 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NB99 AESV3 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC01 AESV3 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC03 AESV3 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC04 AESV3 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC06 AESV3 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC07 AESV4 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC08 AESV4 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC09 AESV4 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC11 AESV4 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC13 AESV4 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC14 AESV4 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC16 AESV4 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC17 AESV5 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC18 AESV5 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC19 AESV5 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC21 AESV5 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC23 AESV5 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC24 AESV5 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC26 AESV5 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC47 AESV7 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC48 AESV7 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC49 AESV7 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC51 AESV7 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC53 AESV7 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC54 AESV7 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC56 AESV7 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC57 AESV8 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC58 AESV8 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC59 AESV8 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC61 AESV8 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC63 AESV8 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC64 AESV8 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NC66 AESV8 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND37 AESX3 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND38 AESX3 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND39 AESX3 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND42 AESX3 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND43 AESX3 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND44 AESX3 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND46 AESX3 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND57 AESX5 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND58 AESX5 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND59 AESX5 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND61 AESX5 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND63 AESX5 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND64 AESX5 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND66 AESX5 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND77 AESX7 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND78 AESX7 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND79 AESX7 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND81 AESX7 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND83 AESX7 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND84 AESX7 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND86 AESX7 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND87 AESW0 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND88 AESW0 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND89 AESW0 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND91 AESW0 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND93 AESW0 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
140
ASME B18.24-2015

650ND94 AESW0 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND96 AESW0 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND97 AESW1 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND98 AESW1 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650ND99 AESW1 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE01 AESW1 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE03 AESW1 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE04 AESW1 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE06 AESW1 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE07 AESW2 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE08 AESW2 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE09 AESW2 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE11 AESW2 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE13 AESW2 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE14 AESW2 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE16 AESW2 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE36 AESP8 [B-149]1,[B-152]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
650NE97 AESW4 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE98 AESW4 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NE99 AESW4 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF01 AESW4 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF03 AESW4 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF04 AESW4 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF06 AESW4 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF07 AESW5 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF08 AESW5 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF09 AESW5 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF11 AESW5 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF13 AESW5 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF14 AESW5 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF16 AESW5 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF17 AESW6 [B-140]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF18 AESW6 [B-141]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF19 AESW6 [B-142]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF21 AESW6 [B-144]1,[B-153]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF23 AESW6 [B-146]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF24 AESW6 [B-147]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
650NF26 AESW6 [B-149]1,[B-154]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA62 AESY0 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA79 AESZD [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA80 AESZC [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA81 AESZB [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA82 AESZA [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA84 AESZE [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA84 AESZF [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA85 AESY7 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA86 AESY8 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA87 AESY9 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NA99 AESZ1 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NB00 AESZ2 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
670NB01 AESZ3 [B-4]1,[B-8]2,[B-12]2,[B-134]5,[B-136]2,[B-137]1,
900NA12 AEB30 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA13 AEB28 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA31 AEB24 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA32 AEB25 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA33 AEB29 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA34 AEB31 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA35 AEB26 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
900NA36 AEB27 [B-4]1,[B-6]2,[B-11]2,[B-134]5,[B-136]2,[B-137]1,
141
ASME B18.24-2015
Table B-3 Fastener Type: Internally Threaded and Table B-3 Fastener Type: Internally Threaded and
Nonthreaded Nonthreaded (Cont’d)
PIN21 PIN18 Table References PIN21 PIN18 Table References
100N16 AEN25 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 241N18 AEN15 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1,

110NAA AEV01 [B-15]3,[B-16]3,[B-134]5,[B-136]2,[B-139]1, 243N20 AEN17 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1,
110NAB AEV02 [B-15]3,[B-16]3,[B-134]5,[B-136]2,[B-139]1, 244N21 AEN18 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1,
110NAC AEV03 [B-15]3,[B-16]3,[B-134]5,[B-136]2,[B-139]1, 245N22 AEN19 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1,
110NAD AEV04 [B-15]3,[B-16]3,[B-134]5,[B-136]2,[B-139]1, 246N23 AEN20 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1,
110NAE AEV05 [B-15]3,[B-16]3,[B-134]5,[B-136]2,[B-139]1, 251NAA AEK01 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
110NAF AEV06 [B-17]6,[B-134]5,[B-136]2,[B-139]1, 251NAB AEK02 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
110NAG AEV07 [B-18]6,[B-134]5,[B-136]2,[B-139]1, 251NAC AEK03 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
110NAH AEV08 [B-21]3,[B-22]3,[B-134]5,[B-136]2,[B-139]1, 251NAD AEK04 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
110NAJ AEV09 [B-19]3,[B-20]3,[B-134]5,[B-136]2,[B-139]1, 251NAE AEK05 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
120NAA AEV10 [B-23]3,[B-24]3,[B-134]5,[B-136]2,[B-139]1, 251NAF AEK06 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
120NAB AEV11 [B-23]3,[B-24]3,[B-134]5,[B-136]2,[B-139]1, 251NBA AEK07 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
120NAC AEV12 [B-23]3,[B-24]3,[B-134]5,[B-136]2,[B-139]1, 251NBB AEK08 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
120NAD AEV13 [B-23]3,[B-24]3,[B-134]5,[B-136]2,[B-139]1, 251NBC AEK09 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
120NAE AEV14 [B-23]3,[B-24]3,[B-134]5,[B-136]2,[B-139]1, 251NBD AEK10 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
120NAF AEV15 [B-23]3,[B-24]3,[B-134]5,[B-136]2,[B-139]1, 251NBE AEK11 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
130NAA AEV16 [B-25]3,[B-26]3,[B-134]5,[B-136]2,[B-139]1, 251NBF AEK12 [B-113]3,[B-114]3,[B-134]5,[B-136]2,[B-139]1,
130NAB AEV17 [B-25]3,[B-26]3,[B-134]5,[B-136]2,[B-139]1, 252NAA AEK13 [B-115]6,[B-134]5,[B-136]2,[B-139]1,
130NAC AEV18 [B-25]3,[B-26]3,[B-134]5,[B-136]2,[B-139]1, 252NAB AEK14 [B-115]6,[B-134]5,[B-136]2,[B-139]1,
163N25 AEN27 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 260NAA AEW01 [B-27]6,[B-134]5,[B-136]2,[B-139]1,
163N26 AEN28 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 260NAB AEW02 [B-27]6,[B-134]5,[B-136]2,[B-139]1,
163N27 AEN29 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 260NAC AEW03 [B-27]6,[B-134]5,[B-136]2,[B-139]1,
163N28 AEN30 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 260NAD AEW04 [B-27]6,[B-134]5,[B-136]2,[B-139]1,
163N29 AEN31 [B-5]1,[B-9]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 260NAE AEW05 [B-27]6,[B-134]5,[B-136]2,[B-139]1,
211NAA AEW07 [B-96]6,[B-134]5,[B-136]2,[B-139]1, 260NAF AEW06 [B-27]6,[B-134]5,[B-136]2,[B-139]1,
211NAB AEW08 [B-96]6,[B-134]5,[B-136]2,[B-139]1, 271NAA AER01 [B-118]6,[B-134]5,[B-136]2,[B-139]1,
211NAC AEW09 [B-96]6,[B-134]5,[B-136]2,[B-139]1, 271NAB AER02 [B-119]6,[B-134]5,[B-136]2,[B-139]1,
211NAD AEW10 [B-97]6,[B-134]5,[B-136]2,[B-139]1, 271NAC AER03 [B-120]6,[B-134]5,[B-136]2,[B-139]1,
211NAE AEW11 [B-98]6,[B-134]5,[B-136]2,[B-139]1, 272NAA AER04 [B-121]6,[B-134]5,[B-136]2,[B-139]1,
211NAF AEW12 [B-99]6,[B-134]5,[B-136]2,[B-139]1, 272NAB AER05 [B-122]6,[B-134]5,[B-136]2,[B-139]1,
211NAG AEW13 [B-102]6,[B-134]5,[B-136]2,[B-139]1, 272NAC AER06 [B-123]6,[B-134]5,[B-136]2,[B-139]1,
211NAH AEW14 [B-100]6,[B-134]5,[B-136]2,[B-139]1, 276NAA AER17 [B-124]6,[B-134]5,[B-136]2,[B-139]1,
211NAJ AEW15 [B-101]6,[B-134]5,[B-136]2,[B-139]1, 276NAB AER18 [B-125]6,[B-134]5,[B-136]2,[B-139]1,
212NAA AEW16 [B-103]6,[B-134]5,[B-136]2,[B-139]1, 276NAC AER19 [B-126]6,[B-134]5,[B-136]2,[B-139]1,
212NAB AEW17 [B-103]6,[B-134]5,[B-136]2,[B-139]1, 276NAD AER20 [B-127]6,[B-134]5,[B-136]2,[B-139]1,
212NAC AEW18 [B-104]6,[B-134]5,[B-136]2,[B-139]1, 277NAA AER21 [B-128]6,[B-134]5,[B-136]2,[B-139]1,
212NAD AEW19 [B-105]6,[B-134]5,[B-136]2,[B-139]1, 277NAB AER22 [B-129]6,[B-134]5,[B-136]2,[B-139]1,
212NAE AEW20 [B-108]6,[B-134]5,[B-136]2,[B-139]1, 277NAC AER23 [B-130]6,[B-134]5,[B-136]2,[B-139]1,
212NAF AEW21 [B-106]6,[B-134]5,[B-136]2,[B-139]1, 278NAA AER24 [B-131]6,[B-134]5,[B-136]2,[B-139]1,
212NAG AEW22 [B-107]6,[B-134]5,[B-136]2,[B-139]1, 278NAB AER25 [B-132]6,[B-134]5,[B-136]2,[B-139]1,
2200AA AEW23 [B-109]6,[B-134]5,[B-136]2,[B-139]1, 278NAC AER26 [B-133]6,[B-134]5,[B-136]2,[B-139]1,
220N00 AEN01 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 291N70 AEE01 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1,
220N08 AEN09 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 700NAA AEV20 [B-28]3,[B-29]3,[B-134]5,[B-136]2,[B-139]1,
220N09 AEN10 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 700NAB AEV21 [B-30]3,[B-31]3,[B-134]5,[B-136]2,[B-139]1,
220N10 AEN11 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 700NAC AEV23 [B-32]3,[B-33]3,[B-134]5,[B-136]2,[B-139]1,
220N11 AEN12 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 700NAD AEV24 [B-34]3,[B-35]3,[B-134]5,[B-136]2,[B-139]1,
220N12 AEN13 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 700NAE AEV25 [B-36]3,[B-37]3,[B-134]5,[B-136]2,[B-139]1,
220N13 AEN14 [B-5]1,[B-7]2,[B-14]2,[B-135]6,[B-136]2,[B-138]1, 700NAF AEV26 [B-38]3,[B-39]3,[B-134]5,[B-136]2,[B-139]1,
221NAA AEW24 [B-110]6,[B-134]5,[B-136]2,[B-139]1, 700NAG AEV27 [B-40]3,[B-41]3,[B-134]5,[B-136]2,[B-139]1,
221NAB AEW25 [B-111]6,[B-134]5,[B-136]2,[B-139]1, 700NAH AEV28 [B-40]3,[B-41]3,[B-134]5,[B-136]2,[B-139]1,
221NAC AEW26 [B-112]6,[B-134]5,[B-136]2,[B-139]1, 700NAJ AEV29 [B-40]3,[B-41]3,[B-134]5,[B-136]2,[B-139]1,
142
ASME B18.24-2015
Table B-3 Fastener Type: Internally Threaded and Table B-4 Thread Table B-6 Inch
Nonthreaded (Cont’d) Series: Externally Size: Externally
Threaded Threaded
PIN21 PIN18 PIN21 PIN18
700NAK AEV30 [B-42]3,[B-43]3,[B-134]5,[B-136]2,[B-139]1,
700NAL AEV31 [B-42]3,[B-43]3,[B-134]5,[B-136]2,[B-139]1, C C AJ 372
700NAM AEV32 [B-44]3,[B-45]3,[B-134]5,[B-136]2,[B-139]1, F F AK 375
700NAN AEV33 [B-44]3,[B-45]3,[B-134]5,[B-136]2,[B-139]1, G G AL 438
820NAA AEP03 [B-50]3,[B-51]3,[B-134]5,[B-136]2,[B-139]1, H H AM 500
K K AN 562
820NAB AEP05 [B-52]3,[B-53]3,[B-134]5,[B-136]2,[B-139]1,
L L AP 625
820NAC AEP06 [B-54]3,[B-55]3,[B-134]5,[B-136]2,[B-139]1,
M M AR 750
820NAD AEP07 [B-56]3,[B-57]3,[B-134]5,[B-136]2,[B-139]1,
N N AS 875
820NAE AEP08 [B-58]3,[B-59]3,[B-134]5,[B-136]2,[B-139]1,
R R B0 A00
820NAF AEP09 [B-60]3,[B-61]3,[B-134]5,[B-136]2,[B-139]1,
S S B1 A12
820NAG AEP10 [B-62]3,[B-63]3,[B-134]5,[B-136]2,[B-139]1,
T T B2 A25
820NAH AEP12 [B-62]3,[B-63]3,[B-134]5,[B-136]2,[B-139]1,
U U B3 A37
820NAJ AEP14 [B-62]3,[B-63]3,[B-134]5,[B-136]2,[B-139]1,
W W B4 A50
820NAK AEP16 [B-62]3,[B-63]3,[B-134]5,[B-136]2,[B-139]1,
B5 A62
820NAL AEP18 [B-62]3,[B-63]3,[B-134]5,[B-136]2,[B-139]1,
B6 A75
820NAM AEP11 [B-64]3,[B-65]3,[B-134]5,[B-136]2,[B-139]1,
Table B-5 Thread B7 A87
820NAN AEP13 [B-64]3,[B-65]3,[B-134]5,[B-136]2,[B-139]1, C0
Series: Internally B00
820NAP AEP15 [B-64]3,[B-65]3,[B-134]5,[B-136]2,[B-139]1, C1 B25
820NAQ AEP17 [B-64]3,[B-65]3,[B-134]5,[B-136]2,[B-139]1,
Threaded
C2 B50
820NAR AEP19 [B-64]3,[B-65]3,[B-134]5,[B-136]2,[B-139]1, PIN21 PIN18 C3 B75
820NAS AEP20 [B-66]3,[B-67]3,[B-134]5,[B-136]2,[B-139]1, D0 C00
820NAT AEP21 [B-68]3,[B-69]3,[B-134]5,[B-136]2,[B-139]1, C C D1 C25
820NAU AEP22 [B-70]3,[B-71]3,[B-134]5,[B-136]2,[B-139]1, D D D2 C50
820NAV AEP23 [B-72]3,[B-73]3,[B-134]5,[B-136]2,[B-139]1, E E D3 C75
820NAW AEP24 [B-72]3,[B-73]3,[B-134]5,[B-136]2,[B-139]1, F F E0 D00
820NAX AEP25 [B-72]3,[B-73]3,[B-134]5,[B-136]2,[B-139]1, G G E1 D25
830NAA AEP26 [B-74]3,[B-75]3,[B-134]5,[B-136]2,[B-139]1, K S E2 D50
830NAB AEP27 [B-74]3,[B-75]3,[B-134]5,[B-136]2,[B-139]1, M M E3 D75
830NAC AEP28 [B-74]3,[B-75]3,[B-134]5,[B-136]2,[B-139]1, T B F0 E00
840NAA AEP29 [B-76]3,[B-77]3,[B-134]5,[B-136]2,[B-139]1, F1 E25
840NAB AEP30 [B-76]3,[B-77]3,[B-134]5,[B-136]2,[B-139]1, F2 E50
850NAA AEP31 [B-78]3,[B-79]3,[B-134]5,[B-136]2,[B-139]1, F3 E75
850NAB AEP32 [B-78]3,[B-79]3,[B-134]5,[B-136]2,[B-139]1, Table B-6 Inch G0 F00
860NAA AEP33 [B-80]3,[B-81]3,[B-134]5,[B-136]2,[B-139]1, Size: Externally
870NAA AEP34 [B-82]3,[B-83]3,[B-134]5,[B-136]2,[B-139]1, Threaded
870NAB AEP35 [B-82]3,[B-83]3,[B-134]5,[B-136]2,[B-139]1, Table B-7 Inch
870NBA AEP36 [B-84]3,[B-85]3,[B-134]5,[B-136]2,[B-139]1, PIN21 PIN18 Size: Internally
870NBB AEP37 [B-84]3,[B-85]3,[B-134]5,[B-136]2,[B-139]1, Threaded
880NAA AEP38 [B-86]3,[B-87]3,[B-134]5,[B-136]2,[B-139]1, 01 060
880NAB AEP39 [B-86]3,[B-87]3,[B-134]5,[B-136]2,[B-139]1, 02 04A PIN21 PIN18
880NBA AEP40 [B-88]3,[B-89]3,[B-134]5,[B-136]2,[B-139]1, 03 034
880NBB AEP41 [B-88]3,[B-89]3,[B-134]5,[B-136]2,[B-139]1, 04 021 01 060
881NAA AEP01 [B-48]3,[B-49]3,[B-134]5,[B-136]2,[B-139]1, A1 073 02 04A
881NAB AEP02 [B-46]3,[B-47]3,[B-134]5,[B-136]2,[B-139]1, A2 086 03 034
890NAA AEP42 [B-90]3,[B-91]3,[B-134]5,[B-136]2,[B-139]1, A3 099 04 021
890NAB AEP43 [B-90]3,[B-91]3,[B-134]5,[B-136]2,[B-139]1, A4 112 A1 073
A5 125 A2 086
890NAC AEP44 [B-92]3,[B-93]3,[B-134]5,[B-136]2,[B-139]1,
A6 138 A3 099
890NAD AEP45 [B-92]3,[B-93]3,[B-134]5,[B-136]2,[B-139]1,
A7 151 A4 112
890NAE AEP46 [B-92]3,[B-93]3,[B-134]5,[B-136]2,[B-139]1,
A8 164 A5 125
890NAF AEP47 [B-92]3,[B-93]3,[B-134]5,[B-136]2,[B-139]1,
A9 177 A6 138
890NAG AEP48 [B-92]3,[B-93]3,[B-134]5,[B-136]2,[B-139]1,
AA 190 A7 151
890NAH AEP49 [B-92]3,[B-93]3,[B-134]5,[B-136]2,[B-139]1,
AB 216 A8 164
890NAJ AEP50 [B-94]3,[B-95]3,[B-134]5,[B-136]2,[B-139]1,
AC 242 A9 177
890NAK AEP52 [B-94]3,[B-95]3,[B-134]5,[B-136]2,[B-139]1,
AD 250 AA 190
890NAL AEP53 [B-94]3,[B-95]3,[B-134]5,[B-136]2,[B-139]1,
AE 268 AB 216
AF 294 AC 242
AG 312 AD 250
AH 320 AE 268
143
ASME B18.24-2015
Table B-7 Inch Table B-8 Metric Table B-9 Metric Table B-10 Inch Table B-11 Inch
Size: Internally Size: Externally Size: Internally Miniature Screw Length: Externally
Threaded (Cont’d) Threaded Threaded Size Threaded
PIN21 PIN18 PIN21 PIN18 PIN21 PIN18 PIN21 PIN18 PIN21 PIN18
AF 294 FU 30C AR 33E X0 030 38 E25

AG 312 FV 30E BR 33G X1 035 39 E50
AH 320 FW 33E CR 33H X2 040 40 E75
AJ 372 FX 35C DR 36E X3 045 41 F00
AK 375 FZ 39E ER 36G X4 050 42 F25
AL 438 GF 10C FR 39E X5 055 43 F50
AM 050 KM C0N GF 10Z X6 060 44 F75
AN 562 LM 90N GR 39G X7 070 45 G00
AP 625 MA 163 HR 39J X8 080 46 G25
AR 750 MB 204 MA 163 X9 090 47 G50
AS 812 MC 224 MB 204 XA 100 49 H00
AT 875 MD 254 MC 254 XB 110 50 H50
AU 938 ME 291 MD 305 XC 120 51 J00
B0 A00 MF 305 ME 356 XD 140 52 J50
B1 A12 MG 356 MF 407 53 K00
B2 A25 MH 407 MG 508 54 K10
B3 A37 MJ 421 MH 06A 55 K20
B4 A50 MK 481 MJ 10C Table B-11 Inch 56 K30
B5 A62 ML 508 ML 12D Length: Externally 57 K40
B6 A75 MM 551 MM 14E Threaded 58 K50
B7 A87 MN 06A MN 16E 59 K60
C0 B00 MQ 07A MP 20F PIN21 PIN18 60 K70
C1 B25 MR 08B MQ 24G 61 K80
C2 B50 MS 952 MR 30H 01 062 62 K90
C3 B75 MT 10Z MS 36J 02 093 63 L00
D0 C00 MU 12D MT 42K 03 125
D1 C25 MV 14E MU 48L 04 156
D2 C50 MW 16E MV 56M 05 188
D3 C75 MX 18F MW 64N 06 250 Table B-12
E0 D00 MY 20F MX 72N 07 312
Metric Length:
E1 D25 MZ 22F MY 80N 08 375
Externally
E2 D50 NM 80N MZ 90N 09 438
10
Threaded
E3 D75 PM 72N RA 224 500
F0 E00 QM 64N RB 07A 11 562 PIN21 PIN18
RM 56M RC 08A 12 625
SM 48L RD 08B 13 688 A0 15M
T2 228 RE 10A 14 750 A1 20M
Table B-8 Metric
T3 351 RF 10B 15 812 A2 25M
Size: Externally
T6 631 RG 12B 16 875 A3 30M
Threaded 17 A00
T8 802 RH 12C A4 40M
TM 42K RJ 14C 18 A12 A5 50M
PIN21 PIN18
UF 50C RK 16C 19 A25 A6 60M
FA 08A UM 39J RL 18C 20 A37 A7 70M
FB 107 VF 48E RM 18E 21 A50 A8 80M
FC 10A VM 36J RN 18F 22 A62 A9 90M
FD 10B WF 45C RP 20C 23 A75 B1 010
FE 12A WM 33H RQ 20E 24 A87 B2 012
FF 12C XF 42E RS 22C 25 B00 B3 013
FG 12B XM 30H RT 22E 26 B25 B4 014
FH 14C YF 40C RU 22F 27 B50 B6 016
FJ 15A YM 27G RV 24E 28 B75 B7 017
FK 16C ZF 39G RW 27E 29 C00 B8 018
FL 17A ZM 24G RX 27G 30 C25 B9 019
FM 18C RY 30E 31 C50 C0 020
FN 20C RZ 30G 32 C75 C2 022
FP 20E ZM C0N 33 D00 C5 025
FQ 22C 34 D25 D0 030
FR 24E 35 D50 D5 035
FS 25C 36 D75 E0 040
FT 27E 37 E00 E5 045
144
ASME B18.24-2015
Table B-12 Table B-15 Table B-17 Table B-19 Table B-22
Metric Length: Dimensions/Other Dimensions/Other Dimensions/Other Dimensions/Other
Externally Characteristics: Characteristics: Characteristics: Characteristics:
Threaded (Cont’d) Nonthreaded Nonthreaded Nonthreaded Nonthreaded
F0 050 006 062 0006NN 06Z000 005 055 043 138

F5 055 009 094 0008NN 08Z000 006 060 050 500
G0 060 012 125 0010NN 10Z000 056 562
G5 065 015 156 0012NN 12Z000 062 625
H0 070 018 188 0014NN 14Z000 068 688
H5 075 021 219 0100NN 010000 Table B-20 075 750
I0 080 025 250 0125NN 012000 Dimensions/Other 081 812
J0 090 028 281 0150NN 015000 Characteristics: 087 875
K0 100 031 312 0175NN 017000 100 A00
Nonthreaded
K1 110 034 344 0200NN 020000
K2 120 037 375 0250NN 025000 PIN21 PIN18
K3 130 040 406 0300NN 030000 Table B-23
K4 140 043 438 0350NN 035000 018 188
Dimensions/Other
K5 150 006 062 0400NN 040000 025 250
Characteristics:
K6 160 009 094 0500NN 050000 031 312
037 375
Nonthreaded
K8 180 012 125 0600NN 060000
L0 200 0700NN 070000 043 438
PIN21 PIN18
L2 220 0800NN 080000 050 500
L4 240 0900NN 090000 056 562 050 500
Table B-16
L6 260 1000NN 100000 062 625 062 625
Dimensions/Other
L8 280 1200NN 120000 075 750 075 750
Characteristics:
M0 300 1400NN 140000 081 812 087 875
Nonthreaded 087 875
1600NN 160000 100 A00
1800NN 180000 093 938 112 A12
PIN21 PIN18
100 A00 125 A25
Table B-13 Inch
Miniature Screw 003 031 137 A37
006 062 Table B-18 150 A50
Length
009 094 Dimensions/Other 162 A62
PIN21 PIN18 012 125 Table B-21 175 A75
Characteristics:
015 156 Dimensions/Other
Nonthreaded
06 250 018 188 Characteristics:
0N 200 025 250 PIN21 PIN18 Nonthreaded
10 500 028 281 Table B-24
1N 320 031 312 0100NN 010000 PIN21 PIN18 Dimensions/Other
2N 400 037 375 0125NN 012000 Characteristics:
3N 600 043 438 0150NN 015000 004 040
005 050
Nonthreaded
N0 020 050 500 0175NN 017000
N1 025 056 562 0200NN 020000 006 060
PIN21 PIN18
N2 032 062 625 0300NN 030000 007 070
N3 040 068 688 0350NN 035000 008 080 010 A10
N4 050 075 750 0375NN 375000 010 100 012 A25
N5 060 081 812 0400NN 040000 011 110 013 A37
N6 080 087 875 0500NN 050000 012 120 015 A50
N7 100 093 938 0600NN 060000 013 130 016 A62
N8 120 100 A00 0700NN 070000 014 140 017 A75
N9 160 112 A12 0800NN 080000 018 A87
125 A25 0900NN 090000 020 B00
137 A37 1000NN 100000 022 B25
Table B-14 150 A50 1200NN 120000 Table B-22 023 B37
162 A62 1400NN 140000 Dimensions/Other 025 B50
Length: Internally
175 A75 1600NN 160000 Characteristics: 026 B62
Threaded
200 B00 1800NN 180000 Nonthreaded 027 B75
PIN21 PIN18 225 B25 2000NN 200000 028 B87
250 B50 PIN21 PIN18 030 C00
10 10X 275 B75 032 C25
15 15X 300 C00 006 062 033 C75
20 20X 012 125 035 C50
25 25X 018 188 036 C62
30 30X 025 250 037 C75
NN 000 031 312 038 C87
145
ASME B18.24-2015
Dimensions/Other Dimensions/Other Dimensions/Other Dimensions/Other Dimensions/Other
Characteristics: Characteristics: Characteristics: Characteristics: Characteristics:
Nonthreaded Nonthreaded Nonthreaded Nonthreaded Nonthreaded
(Cont’d)
PIN21 PIN18 PIN21 PIN18 PIN21 PIN18 PIN21 PIN18
PIN21 PIN18
002 20M 006 061 068 687 026 265
040 D00 003 30M 008 089 070 703 028 281
042 D25 004 40M 009 099 071 718 029 296
043 D37 005 50M 012 123 073 734 031 312
045 D50 006 60M 014 146 075 750 032 328
046 D62 008 80M 018 188 076 765 034 343
047 D75 010 010 021 217 078 781 035 359
048 D87 012 012 025 252 079 796 037 375
050 E00 015 015 031 310 081 812 039 390
052 E25 018 018 082 828 040 406
053 E37 020 020 084 843 042 421
055 E50 022 022 Table B-29 085 859 043 437
057 E62 025 025 Dimensions/Other 087 875 045 453
058 E87 028 028 089 890 046 468
Characteristics:
060 F00 030 030 090 906 048 484
Nonthreaded
062 F25 032 032 092 921 050 500
063 F37 035 035 PIN21 PIN18 093 937 051 515
065 F50 038 038 095 953 053 531
066 F62 040 040 006 062 096 968 054 546
067 F75 045 045 007 078 098 984 056 562
068 F87 050 050 009 093 100 A00 057 578
070 G00 055 055 010 109 059 593
072 G25 060 060 012 125 060 609
073 G37 065 065 014 140 Table B-30 062 625
075 G50 070 070 015 156 064 640
Dimensions/Other
076 G62 075 075 017 171 065 656
Characteristics:
077 G75 080 080 018 187 067 671
Nonthreaded
078 G87 085 085 020 203 068 687
080 H00 090 090 021 218 PIN21 PIN18 070 703
082 H25 095 095 023 234 071 718
083 H37 100 100 025 250 006 061 073 734
085 H50 110 110 026 265 008 089 075 750
086 H62 120 120 028 281 012 123 076 765
087 H75 029 296 014 146 078 781
088 H87 031 312 018 188 079 796
Table B-27 032 328 081 812
034 343 082 828
Dimensions/Other
Table B-25 035 359 Table B-31 084 843
Characteristics:
037 375 Dimensions/Other 085 859
Dimensions/Other Nonthreaded
039 390 Characteristics: 087 875
Characteristics:
PIN21 PIN18 040 406 089 890
Nonthreaded Nonthreaded
042 421 090 906
PIN21 PIN18 0050NN 500000 043 437 PIN21 PIN18 092 921
0062NN 625000 045 453 093 937
010 10M 0075NN 750000 046 468 006 062 095 953
012 12M 0087NN 875000 048 484 007 078 096 968
014 14M 0100NN A00000 050 500 009 093 098 984
016 16M 0112NN A12000 051 515 010 109 100 A00
020 20M 0125NN A25000 053 531 012 125
025 25M 0137NN A37000 054 546 014 140
030 30M 0150NN A50000 056 562 015 156 Table B-32
035 35M 057 578 017 171
Dimensions/Other
040 40M 059 593 018 187
Characteristics:
050 50M 060 609 020 203
021
Nonthreaded
060 60M 062 625 218
070 70M 064 640 023 234 PIN21 PIN18
080 80M 065 656 025 250
090 90M 067 671 014 146
100 010 018 188
110 011 025 252
120 012
146
ASME B18.24-2015
006 062 096 968 059 593 015 156 008 089
007 078 098 984 060 609 017 171 012 123
009 093 100 A00 062 625 018 187 014 146
010 109 064 640 020 203 018 188
012 125 065 656 021 218 021 217
014 140 067 671 023 234 025 252
015 156 Table B-34 068 687 025 250
017 171 Dimensions/Other 070 703 026 265
018 187 Characteristics: 071 718 028 281
020 203 Nonthreaded 073 734 029 296 Table B-39
021 218 075 750 031 312 Dimensions/Other
023 234 PIN21 PIN18 076 765 032 328 Characteristics:
025 250 078 781 034 343 Nonthreaded
026 265 014 146 079 796 035 359
028 281 018 188 081 812 037 375 PIN21 PIN18
029 296 082 828 039 390
031 312 084 843 040 406 006 062
032 328 085 859 042 421 007 078
034 343 Table B-35 087 875 043 437 009 093
035 359 Dimensions/Other 089 890 045 453 010 109
037 375 090 906 046 468 012 125
Characteristics:
039 390 092 921 048 484 014 140
Nonthreaded
040 406 093 937 050 500 015 156
042 421 PIN21 PIN18 095 853 051 515 017 171
043 437 096 968 053 531 018 187
045 453 006 062 098 984 054 546 020 203
046 468 007 078 100 A00 056 562 021 218
048 484 009 093 057 578 023 234
050 500 010 109 059 593 025 250
051 515 012 125 060 609 026 265
053 531 014 140 Table B-36 062 625 028 281
054 546 015 156 Dimensions/Other 064 640 029 296
056 562 017 171 Characteristics: 065 656 031 312
057 578 018 187 Nonthreaded 067 671 032 328
059 593 020 203 068 687 034 343
060 609 021 218 PIN21 PIN18 070 703 035 359
062 625 023 234 071 718 037 375
064 640 025 250 008 089 073 734 039 390
065 656 026 265 012 123 075 750 040 406
067 671 028 281 014 146 076 765 042 421
068 687 029 296 018 188 078 781 043 437
070 703 031 312 021 217 079 796 045 453
071 718 032 328 025 252 081 812 046 468
073 734 034 343 082 828 048 484
075 750 035 359 084 843 050 500
076 765 037 375 085 859 051 515
078 781 039 390 Table B-37 087 875 053 531
079 796 040 406 Dimensions/Other 089 890 054 546
081 812 042 421 090 906 056 562
Characteristics:
082 828 043 437 092 921 057 578
Nonthreaded
084 843 045 453 093 937 059 593
085 859 046 468 PIN21 PIN18 095 953 060 609
087 875 048 484 096 968 062 625
089 890 050 500 006 062 098 984 064 640
090 906 051 515 007 078 100 A00 065 656
092 921 053 531 009 093 067 671
093 937 054 546 010 109 068 687
095 953 056 562 012 125 070 703
057 578 014 140 071 718
147
ASME B18.24-2015
(Cont’d)
PIN21 PIN18
029 296 006 062 098 984 031 312
073 734 031 312 007 078 100 A00 037 375
075 750 032 328 009 093 043 438
076 765 034 343 010 109 050 500
078 781 035 359 012 125 062 625
079 796 037 375 014 140 Table B-44 075 750
082 828 040 406 017 171 Characteristics:
084 843 042 421 018 187 Nonthreaded
085 859 043 437 020 203 Table B-47
087 875 045 453 021 218 PIN21 PIN18 Dimensions/Other
089 890 046 468 023 234 Characteristics:
090 906 048 484 025 250 092 092 Nonthreaded
092 921 050 500 026 265 123 123
093 937 051 515 028 281 125 125 PIN21 PIN18
095 953 053 531 029 296 146 146
096 968 054 546 031 312 152 152 050 500
098 984 056 562 032 328 188 188 075 750
100 A00 057 578 034 343 190 190 100 A00
059 593 035 359 150 A50
060 609 037 375 200 B00
Table B-40 062 625 039 390 250 B50
064 640 040 406 Table B-45 300 C00
Dimensions/Other
065 656 042 421 Dimensions/Other 350 C35
Characteristics:
067 671 043 437 400 D00
Nonthreaded Characteristics:
068 687 045 453 500 E00
Nonthreaded
PIN21 PIN18 070 703 046 468 600 F00
071 718 048 484 PIN21 PIN18
009 092 073 734 050 500
012 125 075 750 051 515 250 250
014 146 076 765 053 531 281 281 Table B-48
015 152 078 781 054 546 312 312 Dimensions/Other
018 188 079 796 056 562 328 328 Characteristics:
019 190 081 812 057 578 344 344 Nonthreaded
082 828 059 593 359 359
084 843 060 609 375 375 PIN21 PIN18
085 859 062 625 422 422
Table B-41
087 875 064 640 010 A00
Dimensions/Other 089 890 065 656 018 188
Characteristics: 090 906 067 671 025 250
Nonthreaded 092 921 068 687 Table B-46 031 312
093 937 070 703 037 375
PIN21 PIN18 Dimensions/Other
095 953 071 718 043 438
Characteristics:
006 062 096 968 073 734 050 500
098 075
Nonthreaded
007 078 984 750 062 625
009 093 100 A00 076 765 075 750
PIN21 PIN18
010 109 078 781 087 875
012 125 079 796 003 031
014 140 Table B-42 081 812 004 047
084 843 007 078
017 171 Characteristics:
:
018 187 085 859 009 094
Nonthreaded
020 203 087 875 010 109
021 218 PIN21 PIN18 089 890 012 120
023 234 090 906 014 141
025 250 009 092 092 921 015 156
026 265 012 125 093 937 018 188
028 281 015 152 095 953 021 219
019 190 096 968 025 250
148
ASME B18.24-2015
Table B-49 Table B-51 Table B-52 Table B-54

Dimensions/Other Dimensions/Other Dimensions/Other Dimensions/Other Table B-57
Characteristics: Characteristics: Characteristics: Characteristics: Dimensions/Other
Nonthreaded Nonthreaded Nonthreaded Nonthreaded Characteristics:
Nonthreaded
PIN21 PIN18
058 580 015 A50 012 125 031 312
077 770 017 A75 015 156 037 375 018 188
094 940 020 B00 018 188 043 438 025 250
106 A06 022 B25 025 250 050 500 031 312
119 A19 025 B50 031 312 062 625 037 375
136 A36 027 B75 037 375 075 750 043 438
161 A61 030 C00 043 438 100 A00 050 500
191 A91 032 C25 050 500 056 562
216 B16 035 C50 062 625 062 625
241 B41 037 C75 075 750 068 687
040 D00 100 A00 Table B-55 075 750
042 D25 Dimensions/Other 081 812
045 D50 087 875
Characteristics:
Table B-50 047 D75 093 937
Nonthreaded
Dimensions/Other 050 E00 Table B-53 100 A00
052 E25 Dimensions/Other PIN21 PIN18 112 A12
Characteristics:
055 E50 125 A25
057 E75 018 188 137 A37
Nonthreaded
PIN21 PIN18 060 F00 025 250 150 A50
062 F25 PIN21 PIN18 031 312 162 A62
006 062 065 F50 037 375 175 A75
007 078 067 F75 018 188 050 500 200 B00
009 094 070 G00 025 250 062 625 225 B25
010 109 072 G25 031 312 075 750 250 B50
012 125 075 G50 037 375 087 875 300 C00
014 145 077 G75 050 500 100 A00
015 156 080 H00 062 625 125 A25
017 172 082 H25 075 750 150 A50
019 193 085 H50 087 875 175 A75 Table B-58
021 219 087 H75 100 A00 200 B00 Dimensions/Other
025 250 090 J00 125 A25 225 B25 Characteristics:
028 289 092 J25 150 A50 250 B50 Nonthreaded
034 341 095 J50 175 A75 300 C00
040 409 097 J75 200 B00 400 D00 PIN21 PIN18
049 492 100 K00 225 B25 450 D50
059 591 102 K02 250 B50 500 E00 006 062
070 706 105 K05 300 C00 550 E50 009 093
086 860 107 K07 400 D00 600 F00 010 109
103 A03 110 K10 450 D50 012 125
124 A24 112 K12 500 E00 015 156
152 A52 115 K15 550 E50 018 188
117 K17 600 F00 Table B-56 021 218
120 K20 Dimensions/Other 025 250
122 K22 031 312
Characteristics:
Table B-51 125 K25 037 375
Nonthreaded
Dimensions/Other 127 K27 Table B-54 043 438
131 K30 050 500
Characteristics: Dimensions/Other PIN21 PIN18
062 625
006 062 075 750
Nonthreaded
PIN21 PIN18 Table B-52 007 078 087 875
Dimensions/Other PIN21 PIN18 009 093 100 A00
002 250 Characteristics: 012 125
003 375 Nonthreaded 006 062 015 156
005 500 007 078 018 187
006 625 PIN21 PIN18 009 093 025 250
007 750 012 125 031 312
008 875 006 062 015 156 037 375
010 A00 007 078 018 188
012 A25 009 093 025 250
149
ASME B18.24-2015
025 250 025 250 012 125 012 125 125 125
031 312 031 312 018 188 018 188 187 188
037 375 037 375 025 250 025 250 250 250
043 438 043 438 031 312 031 312 312 312
050 500 050 500 037 375 037 375 375 375
056 562 056 562 043 438 043 438 500 500
062 625 062 625 050 500 050 500 625 625
068 688 068 688 056 562 056 562 750 750
075 750 075 750 062 625 062 625
081 812 081 812 075 750 075 750
087 875 087 875 087 875 087 875
093 938 093 938 100 A00 100 A00 Table B-68
100 A00 100 A00 112 A12 112 A12 Dimensions/Other
112 A12 112 A12 125 A25 125 A25 Characteristics:
125 A25 125 A25 137 A37 137 A37 Nonthreaded
137 A37 137 A37 150 A50 150 A50
150 A50 150 A50 162 A62 162 A62 PIN21 PIN18
162 A62 162 A62 175 A75 175 A75
175 A75 175 A75 187 A87 187 A87 156 156
200 B00 200 B00 200 B00 200 B00 187 188
225 B25 225 B25 212 B12 212 B12 250 250
250 B50 250 B50 225 B25 225 B25 312 312
300 C00 300 C00 250 B50 250 B50 359 359
275 B75 275 B75 500 500
300 C00 300 C00
325 C25 325 C25
Table B-60 Table B-62 350 C50 350 C50
Dimensions/Other Dimensions/Other 375 C75 375 C75 Table B-69
Characteristics: Characteristics: 400 D00 400 D00 Dimensions/Other
Nonthreaded Nonthreaded 425 D25 425 D25 Characteristics:
450 D50 450 D50
Nonthreaded
PIN21 PIN18
006 062 003 031
009 093 004 046 Table B-64 Table B-66 075 750
010 109 006 062 Dimensions/Other Dimensions/Other 087 875
012 125 007 078 Characteristics: Characteristics: 100 A00
015 156 009 093 Nonthreaded Nonthreaded 112 A12
018 188 010 109 125 A25
021 218 012 125 PIN21 PIN18 PIN21 PIN18 150 A50
025 250 015 156 175 A75
031 312 018 188 003 031 067 067 200 B00
037 375 021 218 004 046 086 086 225 B25
043 438 025 250 006 062 104 104 250 B50
050 500 031 312 007 078 120 120 275 B75
062 625 037 375 009 093 136 136 300 C00
075 750 043 438 010 109 144 144
100 A00 050 500 012 125 161 161
015 156 196 196
018 188 221 221
021 218 250 250
025 250
031 312
037 375
043 438
050 500
150
ASME B18.24-2015
006 062 500 E00 137 A37 004 40M 004 40M
007 078 525 E25 150 A50 005 50M 005 50M
009 094 550 E50 162 A62 006 60M 006 60M
012 125 575 E75 175 A75 008 80M 008 80M
014 141 600 F00 187 A87 010 010 010 010
015 156 200 B00 012 012 012 012
018 188 225 B25 014 014 014 014
021 219 250 B50 016 016 016 016
025 250 Table B-72 275 B75 018 018 018 018
031 312 Dimensions/Other 300 C00 020 020 020 020
037 375 Characteristics: 325 C25 022 022 022 022
043 438 Nonthreaded 350 C50 024 024 024 024
050 500 375 C75 026 026 026 026
062 625 PIN21 PIN18 400 D00 028 028 028 028
075 750 425 D25 030 030 030 030
003 031
450 D50 032 032 032 032
004 047 475 D75 035 035 035 035
006 062 500 E00 040 040 040 040
Table B-71 007 078
Dimensions/Other 525 E25 045 045 045 045
009 094 550 E50 050 050 050 050
Characteristics: 010 109 575 E75 055 055 055 055
Nonthreaded 012 125 600 F00 060 060 060 060
015 156 065 065 065 065
PIN21 PIN18 018 188 070 070 070 070
021 219 075 075 075 075
012 125
025 250 080 080 080 080
018 188
031 312 Table B-74
037 375 090 090 090 090
031 312 Characteristics:
043 438 095 095 095 095
037 375 Nonthreaded
050 500 100 100 100 100
043 438
062 625 120 120
050 500 PIN21 PIN18
075 750
056 562 140 140
062 625 008 08M 160 160
068 688 010 10M 180 180 Table B-78
075 750 012 12M 200 200 Dimensions/Other
Table B-73
081 812 Dimensions/Other 015 15M Characteristics:
087 875 020 20M Nonthreaded
Characteristics:
093 938 025 25M
Nonthreaded
100 A00 030 30M Table B-76 PIN21 PIN18
112 A12 PIN21 PIN18 035 35M Dimensions/Other
125 A25 040 40M Characteristics: 015 15M
137 A37 012 125 050 50M Nonthreaded 020 20M
150 A50 018 188 060 60M 025 25M
162 A62 025 250 080 80M PIN21 PIN18 030 30M
175 A75 031 312 100 010 040 40M
187 A87 037 375 120 012 015 15M 050 50M
200 B00 043 438 140 014 020 20M 060 60M
225 B25 050 500 160 016 025 25M 080 80M
250 B50 056 562 200 020 030 30M 100 010
275 B75 062 625 040 40M 120 012
300 C00 068 688 050 50M 160 016
325 C25 075 750 060 60M 200 020
350 C50 081 812 080 80M 250 025
375 C75 087 875 100 010
400 D00 093 938 120 012
425 D25 100 A00
450 D50 112 A12
475 D75 125 A25
151
ASME B18.24-2015
006 60M 008 80M 008 80M 027 027 003 30M
008 80M 012 012 010 010 030 030 004 40M
010 010 016 016 012 012 033 033 005 50M
012 012 022 022 014 014 036 036 006 60M
016 016 028 028 016 016 040 040 008 80M
020 020 036 036 018 018 045 045 010 010
025 025 045 045 020 020 050 050 012 012
030 030 056 056 022 022 055 055 014 014
035 035 063 063 024 024 060 060 016 016
040 040 080 080 026 026 070 070 018 018
045 045 090 090 028 028 080 080 020 020
050 050 100 100 030 030 090 090 022 022
060 060 112 112 032 032 100 100 024 024
070 070 125 125 035 035 027 027
080 080 140 140 040 040 030 030
090 090 160 160 045 045 033 033
100 100 180 180 050 050 Table B-85 036 036
110 110 200 200 055 055 Dimensions/Other 040 040
120 120 060 060 Characteristics: 045 045
130 130 065 065 Nonthreaded 050 050
140 140 070 070 055 055
150 150 Table B-82 075 075 PIN21 PIN18 060 060
Dimensions/Other 080 080 070 070
Characteristics: 085 085 008 80M 080 080
Nonthreaded 090 090 010 010 090 090
Table B-80 095 095 012 012 100 100
Dimensions/Other PIN21 PIN18 100 100 014 014
Characteristics: 120 120 016 016
Nonthreaded 003 30M 140 140 018 018
004 40M 160 160 020 020 Table B-87
PIN21 PIN18 005 50M 180 180 022 022 Dimensions/Other
006 60M 220 220 024 024 Characteristics:
006 06M 008 80M 240 240 026 026 Nonthreaded
008 08M 010 010 260 260 028 028
010 10M 012 012 280 280 030 030 PIN21 PIN18
012 12M 014 014 300 300 032 032
016 16M 016 016 035 035 006 60M
020 20M 018 018 040 040 008 80M
025 25M 020 020 045 045 010 010
032 32M 022 022 Table B-84 050 050 012 012
040 40M 024 024 Dimensions/Other 055 055 014 014
050 50M 027 027 Characteristics: 060 060 016 016
063 63M 030 030 Nonthreaded 065 065 018 018
080 80M 033 033 070 070 020 020
100 010 036 036 PIN21 PIN18 075 075 022 022
130 013 040 040 080 080 024 024
160 016 045 045 003 30M 085 085 026 026
200 020 050 050 004 40M 090 090 028 028
055 055 005 50M 095 095 030 030
060 060 006 60M 100 100 032 032
070 070 008 80M 120 120 035 035
080 080 010 010 140 140 040 040
090 090 012 012 160 160 045 045
100 100 014 014 180 180 050 050
016 016 220 220 055 055
018 018 240 240 060 060
020 020 260 260 065 065
022 022 280 280 070 070
024 024 300 300 075 075
152
ASME B18.24-2015
Nonthreaded (Cont’d) Nonthreaded Nonthreaded Nonthreaded Nonthreaded
080 080 006 60M 008 80M 012 012 003 30M
085 085 008 80M 010 010 014 014 004 40M
090 090 010 010 012 012 016 016 005 50M
095 095 012 012 014 014 018 018 006 60M
100 100 014 014 016 016 020 020 008 80M
120 120 016 016 018 018 022 022 010 010
140 140 018 018 020 020 024 024 012 012
160 160 020 020 022 022 026 026 016 016
180 180 022 022 024 024 028 028 020 020
220 220 024 024 026 026 030 030 025 025
240 240 026 026 028 028 032 032 030 030
260 260 028 028 030 030 035 035 035 035
280 280 030 030 032 032 040 040 040 040
300 300 032 032 035 035 045 045
035 035 040 040 050 050
040 040 045 045 055 055 Table B-96
Table B-88 050 050 055 055 065 065 Characteristics:
Dimensions/Other 055 055 060 060 070 070
Nonthreaded
Characteristics: 060 060 065 065 075 075
Nonthreaded 065 065 070 070 080 080 PIN21 PIN18
070 070 075 075 085 085
PIN21 PIN18 075 075 080 080 090 090 0008NN 086000
080 080 085 085 095 095 0009NN 099000
003 30M 085 085 090 090 100 100 0011NN 112000
004 40M 090 090 095 095 110 110 0012NN 125000
005 50M 095 095 100 100 120 120 0013NN 138000
006 60M 100 100 0016NN 164000
008 80M 120 120 0019NN 190000
010 010 140 140 0021NN 216000
012 012 160 160 Table B-94 0025NN 250000
014 014 180 180 Table B-92 Dimensions/Other 0031NN 312000
016 016 220 220 Dimensions/Other Characteristics: 0037NN 375000
018 018 240 240 Characteristics: Nonthreaded 0043NN 438000
020 020 260 260 Nonthreaded 0050NN 500000
022 022 280 280 PIN21 PIN18 0056NN 562000
024 024 300 300 PIN21 PIN18
014 0062NN 625000
14M
027 027 015 0068NN 688000
15M 016 16M
030 030 0075NN 750000
020 20M 020 20M
033 033 0081NN 812000
025 25M 025 25M
036 036 Table B-90 0087NN 875000
030 30M 030 30M
040 040 Dimensions/Other 0093NN 938000
040 40M 040 40M
045 045 Characteristics: 0100NN A00000
050 50M 050 50M
050 050 Nonthreaded 0106NN A06000
060 60M 060 60M
055 055 0112NN A12000
080 80M 080 80M
060 060 PIN21 PIN18 0118NN A18000
100 010 100 010
070 070 0125NN A25000
120 012 120 012
080 080 015 15M 1312NN A31000
090 090 020 20M 1375NN A37000
100 100 025 25M 1437NN A43000
030 30M Table B-93 1500NN A50000
040 40M Dimensions/Other 1625NN A62000
050 50M Characteristics: 1750NN A75000
060 60M Nonthreaded 1875NN A87000
080 80M 2000NN B00000
100 010 PIN21 PIN18 2250NN B25000
120 012 2500NN B50000
008 80M 2750NN B75000
010 010 3000NN C00000
153
ASME B18.24-2015
0011NN 112000 0025NN 250000 0011NN 112000 0040NN 40M000 0029NN 29M000
0012NN 125000 0031NN 312000 0012NN 125000 0042NN 42M000 0030NN 30M000
0013NN 138000 0037NN 375000 0013NN 138000 0048NN 48M000 0035NN 35M000
0016NN 164000 0043NN 438000 0016NN 164000 0050NN 50M000 0040NN 40M000
0019NN 190000 0050NN 500000 0019NN 190000 0055NN 55M000 0042NN 42M000
0025NN 250000 0056NN 562000 0021NN 216000 0060NN 60M000 0048NN 48M000
0031NN 312000 0062NN 625000 0025NN 250000 0063NN 63M000 0050NN 50M000
0037NN 375000 0075NN 750000 0031NN 312000 0080NN 80M000 0055NN 55M000
0043NN 438000 0087NN 875000 0037NN 375000 0095NN 95M000 0060NN 60M000
0050NN 500000 0043NN 438000 0100NN 010000 0063NN 63M000
0062NN 625000 0050NN 500000 0120NN 012000 0080NN 80M000
0075NN 750000 0056NN 562000 0140NN 014000 0095NN 95M000
0087NN 875000 Table B-100 0062NN 625000 0160NN 016000 0100NN 010000
0100NN A00000 Dimensions/Other 0068NN 688000 0200NN 020000 0120NN 012000
0112NN A12000 Characteristics: 0075NN 750000 0240NN 024000 0140NN 014000
0125NN A25000 0081NN 812000 0300NN 030000 0160NN 016000
Nonthreaded
1375NN A37000 0087NN 875000
1500NN A50000 PIN21 PIN18 0100NN A00000
1750NN A75000
2000NN B00000 0011NN 112000 Table B-105 Table B-108
2250NN B25000 0013NN 138000 Dimensions/Other Dimensions/Other
2500NN B50000 0016NN 164000 Table B-103 Characteristics: Characteristics:
2750NN B75000 0019NN 190000 Dimensions/Other Nonthreaded Nonthreaded
3000NN C00000 0021NN 216000 Characteristics:
0025NN 250000 Nonthreaded PIN21 PIN18 PIN21 PIN18
0026NN 268000
0031NN 312000 PIN21 PIN18 0060NN 60M000 0022NN 22M000
Table B-98 0037NN 375000 0080NN 80M000 0025NN 25M000
Dimensions/Other 0043NN 438000 0020NN 20M000 0100NN 010000 0029NN 29M000
Characteristics: 0050NN 500000 0025NN 25M000 0120NN 012000 0030NN 30M000
Nonthreaded 0030NN 30M000 0140NN 014000 0035NN 35M000
0035NN 35M000 0160NN 016000 0040NN 40M000
PIN21 PIN18 0040NN 40M000 0200NN 020000 0042NN 42M000
Table B-101 0050NN 50M000 0048NN 48M000
0008NN 086000 Dimensions/Other 0060NN 60M000 0050NN 50M000
0009NN 099000 Characteristics: 0080NN 80M000 0055NN 55M000
0011NN 112000 Nonthreaded 0100NN 010000 Table B-106 0060NN 60M000
0012NN 125000 0120NN 012000 Dimensions/Other 0063NN 63M000
0013NN 138000 PIN21 PIN18 0140NN 014000 Characteristics: 0080NN 80M000
0016NN 164000 0160NN 016000 Nonthreaded 0095NN 95M000
0019NN 190000 0011NN 112000 0200NN 020000 0100NN 010000
0021NN 216000 0013NN 138000 0240NN 024000 PIN21 PIN18 0120NN 012000
0025NN 250000 0016NN 164000 0300NN 030000 0140NN 014000
0031NN 312000 0019NN 190000 0360NN 036000 0022NN 22M000 0160NN 016000
0037NN 375000 0021NN 216000 0025NN 25M000 0200NN 020000
0043NN 438000 0025NN 250000 0029NN 29M000 0240NN 024000
0050NN 500000 0031NN 312000 0030NN 30M000 0300NN 030000
0056NN 562000 0037NN 375000 Table B-104 0035NN 35M000
0062NN 625000 0043NN 438000 Dimensions/Other 0040NN 40M000
0068NN 688000 0050NN 500000 Characteristics: 0042NN 42M000
0075NN 750000 0056NN 562000 Nonthreaded 0048NN 48M000 Table B-109
0081NN 812000 0062NN 625000 0050NN 50M000 Dimensions/Other
0087NN 875000 PIN21 PIN18 0055NN 55M000 Characteristics:
0100NN A00000 0060NN 60M000 Nonthreaded
0112NN A12000 0022NN 22M000 0063NN 63M000
0125NN A25000 0025NN 25M000 0080NN 80M000 PIN21 PIN18
0029NN 29M000 0095NN 95M000
0030NN 30M000 0100NN 010000 N016HN 01N000
0035NN 35M000 0120NN 012000 N016SN 01N000
154
ASME B18.24-2015
(Cont’d)
PIN21 PIN18
R200SN 20R000 0021HN 216000 W062SN 62W000 B081NN 81B000
N020HN 02N000 R240HN 24R000 0021SN 216000 W075HN 75W000 B093NN 93B000
N020SN 02N000 R240SN 24R000 0162HN A62000 W075SN 75W000 B106NN A0B000
N025HN 2BN000 R300HN 30R000 0162SN A62000 W087HN 87W000
N025SN 2BN000 R300SN 30R000 0175HN A75000 W087SN 87W000
N030HN 03N000 R360HN 36R000 0175SN A75000 W100HN A0W000
N030SN 03N000 R360SN 36R000 0187HN A87000 W100SN A0W000 Table B-112
N035HN 3CN000 W016HN 01W000 0187SN A87000 W112HN A1W000 Dimensions/Other
N035SN 3CN000 W016SN 01W000 0200HN B00000 W112SN A1W000 Characteristics:
N040HN 04N000 W020HN 02W000 0200SN B00000 W125HN A2W000 Nonthreaded
N040SN 04N000 W020SN 02W000 0225HN B25000 W125SN A2W000
N050HN 05N000 W025HN 2BW000 0225SN B25000 W137HN A3W000 PIN21 PIN18
N050SN 05N000 W025SN 2BW000 0250HN B50000 W137SN A3W000
N060HN 06N000 W030HN 03W000 0250SN B50000 W150HN A5W000 N006NN 06N000
N060SN 06N000 W030SN 03W000 0275HN B75000 W150SN A5W000 N007NN 07N000
N080HN 08N000 W035HN 3CW000 0275SN B75000 N008NN 08N000
N080SN 08N000 W035SN 3CW000 0300HN C00000 N009NN 09N000
N100HN 10N000 W040HN 04W000 0300SN C00000 N011NN 11N000
N100SN 10N000 W040SN 04W000 N025HN 25N000 Table B-111 N012NN 12N000
N120HN 12N000 W050HN 05W000 N025SN 25N000 Dimensions/Other N013NN 13N000
N120SN 12N000 W050SN 05W000 N031HN 31N000 Characteristics: N016NN 16N000
N140HN 14N000 W060HN 06W000 N031SN 31N000 Nonthreaded N019NN 19N000
N140SN 14N000 W060SN 06W000 N037HN 37N000 N021NN 21N000
N160HN 16N000 W080HN 08W000 N037SN 37N000 PIN21 PIN18 N025NN 25N000
N160SN 16N000 W080SN 08W000 N043HN 43N000 N031NN 31N000
N200HN 20N000 W100HN 10W000 N043SN 43N000 0009NN 094000 N037NN 37N000
N200SN 20N000 W100SN 10W000 N050HN 50N000 0012NN 125000 N043NN 43N000
N360SN 36N000 W160SN 16W000 N075HN 75N000 0023NN 234000 N100NN A0N000
R016HN 01R000 W200HN 20W000 N075SN 75N000 0025NN 250000 N112NN A1N000
R016SN 01R000 W200SN 20W000 N087HN 87N000 0026NN 266000 N125NN A2N000
R020HN 02R000 W240HN 24W000 N087SN 87N000 0031NN 312000 N137NN A3N000
R020SN 02R000 W240SN 24W000 N100HN A0N000 0037NN 37A000 N150NN A5N000
R025HN 2BR000 W300HN 30W000 N100SN A0N000 0043NN 43A000 N162NN A6N000
R025SN 2BR000 W300SN 30W000 N112HN A1N000 0050NN 50A000 N175NN A7N000
R030HN 03R000 W360HN 36W000 N112SN A1N000 0056NN 56A000 N187NN A8N000
R030SN 03R000 W360SN 36W000 N125HN A2N000 0062NN 62A000 N200NN B0N000
R035HN 3CR000 N125SN A2N000 0068NN 68A000 N225NN B2N000
R035SN 3CR000 N137HN A3N000 0081NN 81A000 N250NN B5N000
R040HN 04R000 N137SN A3N000 0093NN 93A000 N275NN B7N000
R040SN 04R000 Table B-110 N150HN A5N000 0106NN A0A000 N300NN C0N000
R050HN 05R000 Dimensions/Other N150SN A5N000 0125NN A25000 R006NN 06R000
R050SN 05R000 Characteristics: W025HN 25W000 0137NN A37000 R007NN 07R000
R060HN 06R000 Nonthreaded W025SN 25W000 0150NN A50000 R008NN 08R000
R060SN 06R000 W031HN 31W000 0162NN A62000 R009NN 09R000
R080HN 08R000 PIN21 PIN18 W031SN 31W000 0168NN A68000 R011NN 11R000
R080SN 08R000 W037HN 37W000 0181NN A81000 R012NN 12R000
R100HN 10R000 0013HN 138000 W037SN 37W000 0193NN A93000 R013NN 13R000
R100SN 10R000 0013SN 138000 W043HN 43W000 0206NN B06000 R016NN 16R000
R120HN 12R000 0016HN 164000 W043SN 43W000 B037NN 37B000 R019NN 19R000
R120SN 12R000 0016SN 164000 W050HN 50W000 B043NN 43B000 R021NN 21R000
R200HN 20R000
155
ASME B18.24-2015
(Cont’d)
PIN21 PIN18
002 022 025 025 002 022 025 025
R050NN 50R000 003 033 028 028 003 033 028 028
R056NN 56R000 004 044 032 032 004 044 032 032
R062NN 62R000 005 055 036 036 005 055 036 036
R075NN 75R000 006 066 040 040 006 066 045 045
R087NN 87R000 008 085 045 045 008 085 050 050
R100NN A0R000 010 106 050 050 010 106 056 056
R112NN A1R000 012 126 056 056 012 126 063 063
R125NN A2R000 014 146 063 063 014 146 070 070
R137NN A3R000 016 167 070 070 016 167 080 080
R150NN A5R000 018 187 080 080 018 187 090 090
R162NN A6R000 020 208 090 090 020 208 100 100
R175NN A7R000 022 226 100 100 022 226 110 110
R187NN A8R000 025 259 110 110 025 259 125 125
R200NN B0R000 028 281 125 125 028 281 140 140
R225NN B2R000 032 321 140 140 032 321 160 160
R250NN B5R000 036 361 150 150 036 361 180 180
R275NN B7R000 040 402 180 180 040 402 200 200
R300NN C0R000 045 452 200 200 045 452 220 220
W006NN 06W000 050 502 220 220 050 502 250 250
W007NN 07W000 056 563 250 250 056 563 280 280
W008NN 08W000 063 633 280 280 063 633 320 320
W009NN 09W000 070 703 320 320 070 703 360 360
W011NN 11W000 080 804 360 360 080 804 400 400
W012NN 12W000 090 904 400 400 090 904
W013NN 13W000 100 C05 100 C05
W016NN 16W000 B05 053 B05 053 Table B-118
W019NN 19W000 B06 064 B06 064 Dimensions/Other
W021NN 21W000 B08 087 Table B-115 B08 087 Characteristics:
W025NN 25W000 B10 108 Dimensions/Other B10 108
Nonthreaded
W031NN 31W000 B12 128 Characteristics: B12 128
W043NN 43W000 B14 149 Nonthreaded B14 149 PIN21 PIN18
W050NN 50W000 B16 161 B16 161
W056NN 56W000 B18 181 PIN21 PIN18 B18 181 0012NN 012000
W062NN 62W000 B20 201 B20 201 0015NN 015000
W075NN 75W000 B22 221 010014 101 B22 221 0018NN 018000
W087NN 87W000 B25 251 015026 152 B25 251 0019NN 019000
W100NN A0W000 B28 281 020026 202 B28 281 0021NN 021000
W112NN A1W000 B32 321 020037 203 B32 321 0023NN 023000
W125NN A2W000 B36 362 025037 253 B36 362 0025NN 025000
W137NN A3W000 030050 305 0027NN 027000
W150NN A5W000 030065 306 0028NN 028000
W162NN A6W000 Table B-114 040065 406 Table B-117 0031NN 031000
W175NN A7W000 Dimensions/Other 040075 407 Dimensions/Other 0034NN 034000
W187NN A8W000 Characteristics: 050065 506 Characteristics: 0035NN 035000
W200NN B0W000 050075 507 0037NN 037000
Nonthreaded Nonthreaded
W225NN B2W000 050090 509 0039NN 039000
W250NN B5W000 PIN21 PIN18 060090 609 PIN21 PIN18 0040NN 040000
W275NN B7W000 060100 60K 0043NN 043000
W300NN C0W000 006 60M 080110 80L 006 60M 0046NN 046000
008 80M 100130 K0P 008 80M 0050NN 050000
010 010 010 010 0055NN 055000
012 012 012 012 0056NN 056000
014 014 014 014 0059NN 059000
016 016 016 016 0062NN 062000
018 018 018 018 0066NN 066000
020 020 020 020 0068NN 068000
022 022 022 022 0075NN 075000
156
ASME B18.24-2015
(Cont’d)
PIN21 PIN18
0500NN 500000 0162NN 162000 0850NN 850000 0039NN 039000
0078NN 078000 0525NN 525000 0165NN 165000 0875NN 875000 0042NN 042000
0081NN 081000 0550NN 550000 0168NN 168000 0900NN 900000 0047NN 047000
0084NN 084000 0575NN 575000 0175NN 175000 0925NN 925000 0050NN 050000
0087NN 087000 0600NN 600000 0181NN 181000 0950NN 950000 0059NN 059000
0093NN 093000 0625NN 625000 0185NN 185000 0975NN 975000 0062NN 062000
0098NN 098000 0650NN 650000 0187NN 187000 1000NN M00000 0066NN 066000
0100NN 100000 0675NN 675000 0193NN 193000 0075NN 075000
0102NN 102000 0700NN 700000 0200NN 200000 0087NN 087000
0106NN 106000 0725NN 725000 0206NN 206000 0098NN 098000
0112NN 112000 0750NN 750000 0212NN 212000 Table B-120 0106NN 106000
0118NN 118000 0775NN 775000 0218NN 218000 Dimensions/Other 0112NN 112000
0125NN 125000 0800NN 800000 0225NN 225000 Characteristics: 0118NN 118000
0131NN 131000 0825NN 825000 0231NN 231000 Nonthreaded 0125NN 125000
0137NN 137000 0850NN 850000 0237NN 237000 0131NN 131000
0143NN 143000 0875NN 875000 0244NN 244000 PIN21 PIN18 0137NN 137000
0150NN 150000 0900NN 900000 0250NN 250000 0150NN 050000
0156NN 156000 0925NN 925000 0256NN 256000 0004NN 004000 0156NN 156000
0162NN 162000 0950NN 950000 0262NN 262000 0006NN 006000 0175NN 175000
0168NN 168000 0975NN 975000 0268NN 268000 0009NN 009000 0193NN 193000
0175NN 175000 1000NN M00000 0275NN 275000 0012NN 012000 0200NN 200000
0177NN 177000 0281NN 281000 0014NN 014000
0181NN 181000 0287NN 287000 0015NN 015000
0187NN 187000 Table B-119 0300NN 300000 0018NN 018000
0196NN 196000 0306NN 306000 0025NN 025000 Table B-122
Dimensions/Other
0200NN 200000 0312NN 312000 0037NN 037000 Dimensions/Other
Characteristics:
0206NN 206000 0315NN 315000 0043NN 043000 Characteristics:
Nonthreaded
0212NN 212000 0325NN 325000 0050NN 050000 Nonthreaded
0215NN 215000 PIN21 PIN18 0334NN 334000 0062NN 062000
0225NN 225000 0347NN 346000 0075NN 075000 PIN21 PIN18
0231NN 231000 0025NN 025000 0350NN 350000 0087NN 087000
0009NN 009000
0237NN 237000 0031NN 031000 0354NN 354000 S006NN 0S6000
0362NN 362000 0012NN 012000
0243NN 243000 0037NN 037000 S009NN 0S9000
0375NN 375000 0015NN 015000
0250NN 250000 0043NN 043000 S011NN S11000
0387NN 387000 0018NN 018000
0255NN 255000 0045NN 045000 S012NN S12000
0393NN 393000 0021NN 021000
0262NN 262000 0050NN 050000 S014NN S14000
0400NN 400000 0025NN 025000
0268NN 268000 0051NN 051000 S015NN S15000
0412NN 412000 0031NN 031000
0275NN 275000 0056NN 056000 S017NN S17000
0425NN 425000 0037NN 037000
0287NN 287000 0062NN 062000 S018NN S18000
0433NN 433000 0043NN 043000
0293NN 293000 0068NN 068000 S021NN S21000
0450NN 450000 0050NN 050000
0300NN 300000 0075NN 075000 S031NN S31000
0056NN 056000
0306NN 306000 0077NN 077000 0462NN 462000 S037NN S37000
0312NN 312000 0081NN 081000 0475NN 475000 S043NN S43000
0315NN 315000 0086NN 086000 0500NN 500000 S075NN S75000
0325NN 325000 0087NN 087000 0525NN 525000 S098NN S98000 Table B-123
0334NN 334000 0090NN 090000 0537NN 537000 S118NN SA1000 Dimensions/Other
0343NN 343000 0093NN 093000 0550NN 550000 S137NN SA3000 Characteristics:
0350NN 350000 0100NN 100000 0575NN 575000 Y006NN 0Y6000
Nonthreaded
0354NN 354000 0102NN 102000 0600NN 600000 Y014NN Y14000
0362NN 362000 0106NN 106000 0625NN 625000 Y018NN Y18000 PIN21 PIN18
0368NN 368000 0112NN 112000 0650NN 650000 Y031NN Y31000
0375NN 375000 0118NN 118000 0662NN 662000 0012NN 012000
0387NN 387000 0125NN 125000 0675NN 675000 0015NN 015000
0393NN 393000 0131NN 131000 0700NN 700000 0018NN 018000
0400NN 400000 0137NN 137000 0725NN 725000 0021NN 021000
0425NN 425000 0143NN 143000 0750NN 750000 0023NN 023000
0437NN 437000 0145NN 145000 0775NN 775000 0025NN 025000
0450NN 450000 0150NN 150000 0800NN 800000 0028NN 028000
0475NN 475000 0156NN 156000 0825NN 825000 0031NN 031000
157
ASME B18.24-2015
(Cont’d)
PIN21 PIN18
0131NN A31000 0406NN D06000 0046NN 469000 0387NN C87000
0037NN 037000 0134NN A34000 0412NN D12000 0050NN 500000 0393NN C93000
0040NN 040000 0137NN A37000 0413NN D13000 0055NN 551000 0400NN D00000
0043NN 043000 0140NN A40000 0418NN D18000 0056NN 562000 0425NN D25000
0050NN 050000 0143NN A43000 0425NN D25000 0059NN 594000 0437NN D37000
0056NN 056000 0146NN A46000 0431NN D31000 0062NN 625000 0450NN D50000
0062NN 062000 0150NN A50000 0433NN D33000 0066NN 669000 0475NN D75000
0068NN 068000 0156NN A56000 0437NN D37000 0068NN 688000 0500NN E00000
0075NN 075000 0157NN A57000 0443NN D43000 0075NN 750000 0525NN E25000
0081NN 081000 0162NN A62000 0450NN D50000 0078NN 781000 0550NN E50000
0087NN 087000 0168NN A68000 0456NN D56000 0081NN 812000 0575NN E75000
0093NN 093000 0175NN A75000 0462NN D62000 0087NN 875000 0600NN F00000
0100NN 100000 0177NN A77000 0468NN D68000 0093NN 938000 0625NN F25000
0112NN 112000 0181NN A81000 0472NN D72000 0098NN 984000 0650NN F50000
0125NN 125000 0187NN A87000 0475NN D75000 0100NN A00000 0675NN F75000
0137NN 137000 0193NN A93000 0481NN D81000 0102NN A02000 0700NN G00000
0150NN 150000 0196NN A96000 0487NN D87000 0106NN A06000 0725NN G25000
0162NN 162000 0200NN B00000 0493NN D93000 0112NN A12000 0750NN G50000
0175NN 175000 0206NN B06000 0500NN E00000 0118NN A18000 0775NN G75000
0200NN 200000 0212NN B12000 0511NN E11000 0125NN A25000 0800NN H00000
0213NN B13000 0512NN E12000 0131NN A31000 0825NN H25000
0215NN B15000 0525NN E25000 0137NN A37000 0850NN H50000
Table B-124 0216NN B16000 0537NN E37000 0143NN A43000 0875NN H75000
Dimensions/Other 0218NN B18000 0550NN E50000 0150NN A50000 0900NN J00000
0225NN B25000 0551NN E51000 0156NN A56000 0925NN J25000
Characteristics:
0236NN B36000 0562NN E62000 0162NN A62000 0950NN J50000
Nonthreaded
0237NN B37000 0575NN E75000 0168NN A68000 0975NN J75000
PIN21 PIN18 0243NN B43000 0587NN E87000 0175NN A75000 1000NN K00000
0250NN B50000 0590NN E90000 0177NN A77000 1025NN K02000
0050NN 500000 0255NN B55000 0600NN F00000 0181NN A81000 1050NN K05000
0053NN 531000 0256NN B56000 0612NN F12000 0187NN A87000 1075NN K07000
0055NN 551000 0262NN B62000 0625NN F25000 0196NN A96000 1100NN K10000
0056NN 562000 0268NN B68000 0629NN F29000 0200NN B00000 1125NN K12000
0059NN 594000 0275NN B75000 0637NN F37000 0206NN B06000 1150NN K15000
0062NN 625000 0281NN B81000 0650NN F50000 0212NN B12000 1175NN K17000
0065NN 656000 0287NN B87000 0662NN F62000 0215NN B15000 1200NN K20000
0066NN 669000 0293NN B93000 0675NN F75000 0225NN B25000 1225NN K22000
0068NN 687000 0295NN B95000 0687NN F87000 0231NN B31000 1250NN K25000
0071NN 718000 0300NN C00000 0700NN G00000 0237NN B37000 1275NN K27000
0075NN 750000 0306NN C06000 0712NN G12000 0243NN B43000 1300NN K30000
0078NN 781000 0312NN C12000 0725NN G25000 0250NN B50000 1325NN K32000
0081NN 812000 0314NN C14000 0737NN G37000 0255NN B55000 1350NN K35000
0084NN 843000 0318NN C18000 0750NN G50000 0262NN B62000 1375NN K37000
0087NN 875000 0325NN C25000 0762NN G62000 0268NN B68000 1400NN K40000
0090NN 906000 0331NN C31000 0775NN G75000 0275NN B75000 1425NN K42000
0093NN 937000 0334NN C34000 0787NN G87000 0287NN B87000 1450NN K45000
0096NN 968000 0337NN C37000 0800NN H00000 0293NN B93000 1475NN K47000
0098NN 984000 0343NN C43000 0825NN H25000 0300NN C00000 1500NN K50000
0100NN A00000 0350NN C50000 0850NN H50000 0306NN C06000
0102NN A02000 0354NN C54000 0875NN H75000 0312NN C12000
0103NN A03000 0356NN C56000 0900NN J00000 0315NN C15000 Table B-126
0106NN A06000 0362NN C62000 0925NN J25000 0325NN C25000 Dimensions/Other
0109NN A09000 0368NN C68000 0950NN J50000 0334NN C34000 Characteristics:
0112NN A12000 0374NN C74000 0975NN J75000 0343NN C43000
Nonthreaded
0115NN A15000 0375NN C75000 1000NN K00000 0350NN C50000
0118NN A18000 0381NN C81000 1025NN K02000 0354NN C54000 PIN21 PIN18
0121NN A21000 0387NN C87000 1050NN K05000 0362NN C62000
0125NN A25000 0393NN C93000 1075NN K07000 0368NN C68000 0050NN 500000
0128NN A28000 0400NN D00000 1100NN K10000 0375NN C75000 0051NN 512000
158
ASME B18.24-2015
(Cont’d)
PIN21 PIN18
0250NN B50000 0562NN E62000 0081NN 812000 0433NN D33000
0053NN 531000 0253NN B53000 0570NN E70000 0086NN 866000 0450NN D50000
0056NN 562000 0256NN B56000 0575NN E75000 0087NN 875000 0462NN D62000
0059NN 594000 0262NN B62000 0587NN E87000 0090NN 901000 0475NN D75000
0062NN 625000 0267NN B67000 0590NN E90000 0093NN 938000 0500NN E00000
0065NN 656000 0268NN B68000 0600NN F00000 0100NN A00000 0525NN E25000
0068NN 687000 0275NN B75000 0612NN F12000 0102NN A02000 0537NN E37000
0071NN 718000 0281NN B81000 0625NN F25000 0106NN A06000 0550NN E50000
0075NN 750000 0283NN B83000 0629NN F29000 0112NN A12000 0575NN E75000
0077NN 777000 0287NN B87000 0637NN F37000 0118NN A18000 0600NN F00000
0078NN 781000 0293NN B93000 0650NN F50000 0125NN A25000 0625NN F25000
0081NN 812000 0295NN B95000 0662NN F62000 0131NN A31000 0650NN F50000
0084NN 843000 0300NN C00000 0669NN F69000 0137NN A37000 0662NN F62000
0086NN 866000 0306NN C06000 0675NN F75000 0143NN A43000 0675NN F75000
0087NN 875000 0312NN C12000 0687NN F87000 0145NN A45000 0700NN G00000
0090NN 906000 0314NN C14000 0700NN G00000 0150NN A50000 0725NN G25000
0093NN 938000 0318NN C18000 0708NN G08000 0156NN A56000 0750NN G50000
0096NN 968000 0325NN C25000 0712NN G12000 0162NN A62000 0775NN G75000
0098NN 987000 0331NN C31000 0725NN G25000 0165NN A65000 0800NN H00000
0100NN A00000 0334NN C34000 0737NN G37000 0168NN A68000 0825NN H25000
0106NN A06000 0350NN C50000 0762NN G62000 0185NN A85000 0900NN J00000
0115NN A15000 0362NN C62000 0800NN H00000 0200NN B00000 0975NN J75000
0118NN A18000 0368NN C68000 0825NN H25000 0206NN B06000 1000NN K00000
0125NN A25000 0375NN C75000 0846NN H46000 0218NN B18000 1050NN A50000
0137NN A37000 0400NN D00000 0900NN J00000 0244NN B44000 1150NN K15000
0156NN A56000 0433NN D33000 1000NN K00000 0275NN B75000 1300NN K30000
0168NN A68000 0452NN D52000 1100NN K10000 0300NN C00000 1400NN K40000
0175NN A75000 0456NN D56000 0306NN C06000 1425NN K42000
0181NN A81000 0462NN D62000 0312NN C12000 1450NN K45000
0185NN A85000 0468NN D68000 Table B-127 0315NN C15000 1475NN K47000
0187NN A87000 0472NN D72000 Dimensions/Other 0325NN C25000 1500NN K50000
0193NN A93000 0475NN D75000 Characteristics: 0334NN C34000
0200NN B00000 0481NN D81000 0346NN C46000
Nonthreaded
0204NN B04000 0487NN D87000 0350NN C50000
0206NN B06000 0492NN D92000 PIN21 PIN18 0354NN C54000 Table B-128
0212NN B12000 0493NN D93000 0356NN C56000 Dimensions/Other
0216NN B16000 0500NN E00000 0050NN 500000 0362NN C62000 Characteristics:
0218NN B18000 0511NN E11000 0051NN 512000 0375NN C75000 Nonthreaded
0225NN B25000 0512NN E12000 0056NN 562000 0387NN C87000
0231NN B31000 0525NN E25000 0062NN 625000 0393NN C93000 PIN21 PIN18
0237NN B37000 0537NN E37000 0068NN 688000 0400NN D00000
0243NN B43000 0550NN E50000 0075NN 750000 0412NN D12000 0004NN 40M000
0244NN B44000 0551NN E51000 0077NN 777000 0425NN D25000 0005NN 50M000
159
ASME B18.24-2015
Dimensions/Other Dimensions/Other Dimensions/Other Dimensions/Other Material and
Characteristics: Characteristics: Characteristics: Characteristics: Treatment A
Nonthreaded Nonthreaded Nonthreaded Nonthreaded
(Cont’d) PIN21 PIN18
PIN21 PIN18 PIN21 PIN18 PIN21 PIN18
PIN21 PIN18 015NN GB5
0026NN 026000 0015NN 015000 0003NN 30M000 016NN GB6
0006NN 60M000 0027NN 027000 0016NN 016000 0004NN 40M000 017NN GB7
0007NN 70M000 0028NN 028000 0018NN 018000 0005NN 50M000 018NN GB8
0008NN 80M000 0029NN 029000 0020NN 020000 0006NN 60M000 019NN GB9
0009NN 90M000 0030NN 030000 0022NN 022000 0007NN 70M000 020NN GC0
0010NN 010000 0032NN 032000 0025NN 025000 0008NN 80M000 021NN GC1
0011NN 011000 0034NN 034000 0009NN 90M000 022NN GC2
0012NN 012000 0036NN 036000 0010NN 010000 023NN GC3
0013NN 013000 0038NN 038000 Table B-131 0011NN 011000 024NN GC4
0014NN 014000 0040NN 040000 0012NN 012000 025NN GC5
Dimensions/Other
0015NN 015000 0042NN 042000 0013NN 013000 026NN GC6
Characteristics:
0016NN 016000 0043NN 043000 0014NN 014000 027NN GC7
Nonthreaded
0017NN 017000 0045NN 045000 0015NN 015000 028NN GC8
0018NN 018000 0046NN 046000 PIN21 PIN18 0016NN 016000 029NN GC9
0019NN 019000 0048NN 048000 0017NN 017000 030NN GD0
0020NN 020000 0050NN 050000 0010NN 010000 0018NN 018000 031NN GD1
0021NN 021000 0052NN 052000 0011NN 011000 0019NN 019000 032NN GD2
0022NN 022000 0054NN 054000 0012NN 012000 0020NN 020000 033NN GD3
0023NN 023000 0055NN 055000 0013NN 013000 0022NN 022000 034NN GD4
0024NN 024000 0057NN 057000 0014NN 014000 0023NN 023000 035NN GD5
0025NN 025000 0058NN 058000 0015NN 015000 0024NN 024000 036NN GD6
0026NN 026000 0060NN 060000 0016NN 016000 0025NN 025000 037NN GD7
0027NN 027000 0062NN 062000 0017NN 017000 0026NN 026000 038NN GD8
0028NN 028000 0065NN 065000 0018NN 018000 0028NN 028000 039NN GD9
0030NN 030000 0068NN 068000 0019NN 019000 0030NN 030000 040NN GE0
0032NN 032000 0070NN 070000 0020NN 020000 0032NN 032000 041NN GE1
0034NN 034000 0072NN 072000 0022NN 022000 0035NN 035000 042NN GE2
0035NN 035000 0075NN 075000 0025NN 025000 0036NN 036000 043NN GE3
0078NN 078000 0027NN 027000 0038NN 038000 044NN GE4
0080NN 080000 0028NN 028000 0040NN 040000 045NN GE5
Table B-129 0082NN 082000 0030NN 030000 0042NN 042000 046NN GE6
0085NN 085000 0032NN 032000 0045NN 045000 047NN GE7
Dimensions/Other
0088NN 088000 0035NN 035000 0048NN 048000 048NN GE8
Characteristics:
0090NN 090000 0038NN 038000 0050NN 050000 049NN GE9
Nonthreaded 050NN
0095NN 095000 0040NN 040000 0052NN 052000 GF0
PIN21 PIN18 0100NN 100000 0045NN 045000 0055NN 055000 051NN GF1
0050NN 050000 052NN GF2
0004NN 40M000 053NN GF3
0005NN 50M000 054NN GF4
0006NN 60M000 Table B-130 Table B-134 055NN GF5
0007NN 70M000 Dimensions/Other Material and 056NN GF6
Table B-132
0008NN 80M000 Characteristics: Treatment A 070NN GF7
Dimensions/Other
0009NN 90M000 071NN GF8
0010NN 010000 PIN21 PIN18 072NN GF9
Nonthreaded 073NN GG0
0011NN 011000 PIN21 PIN18
0012NN 012000 001NN GA1 074NN GG1
PIN21 PIN18
0013NN 013000 0001NN 10M000 002NN GA2 075NN GG2
0014NN 014000 0002NN 20M000 0004NN 40M000 003NN GA3 076NN GG3
0020NN 020000 0008NN 80M000 0010NN 010000 009NN GA9 082NN GG9
0021NN 021000 0009NN 90M000 0011NN 011000 010NN GB0 083NN GH0
0022NN 022000 0010NN 010000 0012NN 012000 011NN GB1 084NN GH1
0023NN 023000 0011NN 011000 0013NN 013000 012NN GB2 085NN GH2
0024NN 024000 0012NN 012000 0014NN 014000 013NN GB3 086NN GH3
0025NN 025000 0013NN 013000 0015NN 015000 014NN GB4 087NN GH4
160
ASME B18.24-2015
Material and Material and Material and Material and Material and
Treatment A Treatment A Treatment A Treatment A Treatment A
(Cont’d)
PIN21 PIN18
159NN WB5 200NN GN1 260NN GU1 320D2 AU2
088NN GH5 160NN WB8 201NN GN2 261NN GU2 320D3 AV6
089NN GH6 161NN WA1 202NN GN3 262NN GU3 320E1 AS8
090NN GH7 162NN WA2 203NN GN4 263NN GU4 320E2 AU4
091NN GH8 163NN WA3 204NN GN5 264NN GU5 320E3 AV8
092NN GH9 164NN WA4 205NN GN6 265NN GU6 320F1 AS4
093NN GJ0 165NN WA5 206NN GN7 266NN GU7 320F2 AU0
094NN GJ1 166NN WA6 207NN GN8 267NN GU8 320F3 AW0
095NN GJ2 167NN WA7 208NN GN9 268NN GU9 320G1 AT2
101NN GJ3 183AN AA1 209NN GP0 269NN GV0 320G2 AU8
102NN GJ4 183BN AA2 210NN GP1 270NN GV1 320H1 AT4
103NN GJ5 193A1 AA9 211NN GP2 271NN GV2 320H2 AV0
104NN GJ6 193A2 AB6 212NN GP3 272NN GV3 320JN AP8
105NN GJ7 193A3 AC6 213NN GP4 273NN GV4 320KN AQ0
106NN GJ8 193A4 AC9 214NN GP5 274NN GV5 320LN AQ2
107NN GJ9 193A5 AD3 215NN GP6 275NN GV6 320MN AQ4
108NN GK0 193A6 AE2 216NN GP7 276NN GV7 320NN WB1
109NN GK1 193A7 AF0 217NN GP8 277NN GV8 320NN AR4
110NN GK2 193A8 AF2 218NN GP9 278NN GV9 320PN AR8
111NN GK3 193AN AA3 219NN GQ0 279NN GW0 321NN WB2
112NN GK4 193B1 AB0 220NN GQ1 280NN GW1 322NN WB3
113NN GK5 193B2 AB7 221NN GQ2 281NN GW2 323NN WB4
114NN GK6 193B3 AC7 222NN GQ3 282NN GW3 324NN WB6
115NN GK7 193B4 AD0 223NN GQ4 283NN GW4 325AM AW6
116NN GK8 193B5 AD4 224NN GQ5 284NN GW5 325AN AW4
117NN GK9 193B6 AE3 225NN GQ6 285NN GW6 325BN AW5
118NN GL0 193BN AA4 226NN GQ7 286NN GW7 325CM AW7
119NN GL1 193C1 AB1 227NN GQ8 287NN GW8 325NN WB7
120NN GL2 193C2 AB8 228NN GQ9 288NN GW9 326NN WB9
121NN GL3 193C3 AC8 229NN GR0 289NN GX0 327NN WC0
122NN GL4 193C4 AD1 230NN GR1 290NN GX1 330NN WC1
123NN GL5 193C5 AD5 231NN GR2 291NN GX2 331NN WC2
124NN GL6 193C6 AE4 232NN GR3 292NN GX3 354AN AW8
125NN GL7 193CN AA5 233NN GR4 293NN WE2 354BN AW9
126NN GL8 193D1 AB2 234NN GR5 294NN WE5 394AN AX0
127NN GL9 193D2 AB9 235NN GR6 295NN WE6 394BN AX1
128NN GM0 193D4 AD2 236NN GR7 296NN WE7 394CN AX2
129NN GM1 193D5 AD6 237NN GR8 297NN WE8 394DN AX3
130NN GM2 193D6 AE5 238NN GR9 298NN WF9 400AN SA1
131NN GM3 193DN AA6 239NN GS0 299NN WF0 400CN SA2
132NN GM4 193E1 AB3 240NN GS1 301NN GX4 401AN SA3
133NN GM5 193E2 AC0 241NN GS2 302NN GX5 401CN SA4
134NN GM6 193E5 AD7 242NN GS3 303NN GX6 402AN SA5
140NN WD1 193E6 AE6 243NN GS4 307AN AP5 402CN SA6
141NN WD2 193EN AA7 244NN GS5 307BN AP6 403AN SA7
142NN WD3 193F1 AB4 245NN GS6 307CN AP7 403CN SA8
143NN WD4 193F2 AC1 246NN GS7 310NN GX7 404AN SA9
144NN WE0 193F5 AD8 247NN GS8 311NN GX8 404CN SB0
145NN WD5 193F6 AE7 248NN GS9 312NN GX9 405AN SB1
146NN WD6 193FN AA8 249NN GT0 313NN GY0 405CN SB2
147NN WD7 193G1 AB5 250NN GT1 320A1 AS0 406AN SB3
148NN WD8 193G2 AC2 251NN GT2 320A2 AT6 406CN SB4
149NN WD9 193G5 AD9 252NN GT3 320A3 AV2 407AN SB5
150NN WE1 193G6 AE8 253NN GT4 320B1 AS2 407CN SB6
151NN WE3 193H2 AC3 254NN GT5 320B2 AT8 408AN SB7
152NN WE4 193H5 AE0 255NN GT6 320B3 AV4 408CN SB8
155NN GM7 193H6 AE9 256NN GT7 320C1 AT0 409AN SB9
156NN WA8 193J2 AC4 257NN GT8 320C2 AU6 409CN SC0
157NN WA9 193J5 AE1 258NN GT9 320C3 AW2 410AN SC1
158NN WB0 193K2 AC5 259NN GU0 320D1 AS6 410CN SC2
161
ASME B18.24-2015
Treatment A Treatment A Treatment A Treatment A Treatment A
(Cont’d)
PIN21 PIN18
439CN SH8 4687A BY9 468PA BV3 480MN SN3
411AN SC3 449AN AX4 4687M CF2 468PM CB8 480SN SN4
411CN SC4 449BN AX5 4687N BY8 468PN BV2 481MN SN5
412AN SC5 449CN AX6 4687S CF3 468PS CB9 481SN SN6
412CN SC6 450FN SH9 4688A BY3 468QA BV5 482MN SN7
413AN SC7 450RN SJ0 4688M CF4 468QM CC0 482SN SN8
413CN SC8 451FN SJ1 4688N BY2 468QN BV4 483MN SN9
414AN SC9 451RN SJ2 4688S CF5 468QS CC1 483SN SP0
414CN SD0 452FN SJ3 468AA BS7 468RA BV7 484MN SP1
415AN SD1 452RN SJ4 468AM BZ2 468RM CC2 484SN SP2
415CN SD2 453A1 AX9 468AN BS6 468RN BV6 485MN SP3
416AN SD3 453A4 AX7 468AS BZ3 468RS CC3 485SN SP4
416CN SD4 453B2 AY0 468BA BS9 468SA BV9 486MN SP5
417AN SD5 453B3 AY1 468BM BZ4 468SM CC4 486SN SP6
417CN SD6 453C4 AY2 468BN BS8 468SN BV8 487MN SP7
418AN SD7 453C5 AY3 468BS BZ5 468SS CC5 487SN SP8
418CN SD8 453D6 AY4 468CA BT1 468TA BW1 488MN SP9
419AN SD9 453D7 AY5 468CM BZ6 468TM CC6 488SN SQ0
419CN SE0 454FN SJ5 468CN BT0 468TN BW0 489AN AY6
420AN SE1 454RN SJ6 468CS BZ7 468TS CC7 489BN AY8
420CN SE2 455FN SJ7 468DA BT3 468UA BW3 489CN AY7
421AN SE3 455RN SJ8 468DM BZ8 468UM CC8 490AM AZ2
421CN SE4 456FN SJ9 468DN BT2 468UN BW2 490AN AZ0
422AN SE5 456RN SK0 468DS BZ9 468US CC9 490CM AZ3
422CN SE6 457FN SK1 468EA BT5 468VA BW5 490CN AZ1
423AN SE7 457RN SK2 468EM CA0 468VM CD0 500NN SQ1
423CN SE8 458FN SK3 468EN BT4 468VN BW4 519HN SQ3
424AN SE9 458RN SK4 468ES CA1 468VS CD1 519PN SQ2
424CN SF0 459FN SK5 468FA BT7 468WA BW9 520HN SQ5
425AN SF1 459RN SK6 468FM CA2 468WM CD4 520PN SQ4
425CN SF2 460FN SK7 468FN BT6 468WN BW8 521HN SQ7
426AN SF3 460RN SK8 468FS CA3 468WS CD5 521PN SQ6
426CN SF4 461FN SK9 468GA BT9 468XA BX1 522HN SQ9
427AN SF5 461RN SL0 468GM CA4 468XM CD6 522PN SQ8
427CN SF6 462FN SL1 468GN BT8 468XN BX0 523HN SR1
428AN SF7 462RN SL2 468GS CA5 468XS CD7 523PN SR0
428CN SF8 4681A BX5 468HA BU1 468YA BX3 524HN SR3
429AN SF9 4681M CE0 468HM CA6 468YM CD8 524PN SR2
429CN SG0 4681N BX4 468HN BU0 468YN BX2 525HN SR5
430AN SG1 4681S CE1 468HS CA7 468YS CD9 525PN SR4
430CN SG2 4682A BX7 468JA BU3 470MN SL3 541AN CF8
431AN SG3 4682M CE2 468JM CA8 470SN SL4 568AM CF9
431CN SG4 4682N BX6 468JN BU2 471MN SL5 568BM CG0
433AN SG5 4682S CE3 468JS CA9 471SN SL6 568CM CG1
433CN SG6 4683A BX9 468KA BU5 472MN SL7 568DM CG2
434AN SG7 4683M CE4 468KM CB0 472SN SL8 568EM CG3
434CN SG8 4683N BX8 468KN BU4 473MN SL9 568FM CG4
435AN SG9 4683S CE5 468KS CB1 473SN SM0 568GM CG5
435CN SH0 4684A BY1 468LA BU7 474MN SM1 568HM CG6
436AM BD8 4684M CE6 468LM CB2 474SN SM2 568JM CG7
436AN SH1 4684N BY0 468LN BU6 475MN SM3 568KM CG9
436BM BD9 4684S CE7 468LS CB3 475SN SM4 568LM CH0
436BN BD7 4685A BY5 468MA BU9 476MN SM5 568MM CH1
436CN SH2 4685M CE8 468MM CB4 476SN SM6 574NM BC4
436DN BD6 4685N BY4 468MN BU8 477MN SM7 574NN BB3
437AN SH3 4685S CE9 468MS CB5 477SN SM8 593A1 CH2
437CN SH4 4686A BY7 468NA BV1 478MN SM9 593A2 CH3
438AN SH5 4686M CF0 468NM CB6 478SN SN0 593A3 CH5
438CN SH6 4686N BY6 468NN BV0 479MN SN1 593A4 CH4
439AN SH7 4686S CF1 468NS CB7 479SN SN2 593B1 CH6
162
ASME B18.24-2015
Treatment A Treatment A Treatment B Treatment B Treatment B
(Cont’d)
PIN21 PIN18
659NN UJ0 001NNN GA1 074NNN GG1 144NNN WE0
593B2 CH7 660NN UJ1 002NNN GA2 075NNN GG2 145NNN WD5
593C1 CJ0 663NN UJ4 005NNN GA5 078NNN GG5 148NNN WD8
593C2 CJ1 664NN UJ5 006NNN GA6 079NNN GG6 149NNN WD9
593C3 CJ3 665NN UJ6 007NNN GA7 080NNN GG7 150NNN WE1
593C4 CJ2 666NN UJ7 008NNN GA8 081NNN GG8 151NNN WE3
593D1 CJ4 667NN UJ8 009NNN GA9 082NNN GG9 152NNN WE4
593D4 CJ5 668NN UJ9 010NNN GB0 083NNN GH0 155NNN GM7
593E5 CJ6 669NN UK0 011NNN GB1 084NNN GH1 156NNN WA8
593E6 CJ7 670NN UK1 012NNN GB2 085NNN GH2 157NNN WA9
593F5 CJ8 671NN UK2 013NNN GB3 086NNN GH3 158NNN WB0
593F6 CJ9 672NN UK3 014NNN GB4 087NNN GH4 159NNN WB5
593G7 CK0 673NN UK4 015NNN GB5 088NNN GH5 160NNN WB8
593GN CK1 687NN BD5 016NNN GB6 089NNN GH6 161NNN WA1
600NN UA7 738A2 CZ6 017NNN GB7 090NNN GH7 162NNN WA2
601NN UB7 738B1 CZ7 018NNN GB8 091NNN GH8 163NNN WA3
602NN UC8 738D2 CZ9 019NNN GB9 092NNN GH9 164NNN WA4
603NN UA1 738E1 DA0 020NNN GC0 093NNN GJ0 165NNN WA5
604NN UD1 738G2 DA2 021NNN GC1 094NNN GJ1 166NNN WA6
605NN UD3 738H1 DA3 022NNN GC2 095NNN GJ2 167NNN WA7
606NN UD6 738K2 DA5 023NNN GC3 101NNN GJ3 19401A AF5
607NN UE0 738L1 DA6 024NNN GC4 102NNN GJ4 19401B AF5
608NN UE1 738M4 DA7 025NNN GC5 103NNN GJ5 19401C AF5
609NN UE4 738N5 DA8 026NNN GC6 104NNN GJ6 19402A AF7
610NN UE6 738P6 DA9 027NNN GC7 105NNN GJ7 19402B AF7
611NN UE8 738Q5 DB0 028NNN GC8 106NNN GJ8 19402C AF7
612NN UF0 738R6 DB1 029NNN GC9 107NNN GJ9 19403A AF9
613NN UF1 738S4 DB2 030NNN GD0 108NNN GK0 19403B AF9
614NN UF2 738T5 DB3 031NNN GD1 109NNN GK1 19403C AF9
615NN UF3 738U6 DB4 032NNN GD2 110NNN GK2 19404A AG1
616NN UF4 738V7 DB5 033NNN GD3 111NNN GK3 19404B AG1
617NN UF6 835NM DG6 034NNN GD4 112NNN GK4 19404C AG1
618NN UF5 835NN DG5 035NNN GD5 113NNN GK5 19405A AG5
619NN UB0 837AM DX8 036NNN GD6 114NNN GK6 19405A AG3
620NN UG3 837AN DR0 037NNN GD7 115NNN GK7 19405B AG3
621NN UC0 837BM DX9 038NNN GD8 116NNN GK8 19405C AG3
622NN UC7 837BN DR2 039NNN GD9 117NNN GK9 19407A AG7
623NN UA2 837CM DY0 040NNN GE0 118NNN GL0 19407B AG5
624NN UD9 837CN DR6 041NNN GE1 119NNN GL1 19407C AG5
625NN UG5 84453 EA1 042NNN GE2 120NNN GL2 19408A AG9
626NN UG9 879AM EC0 043NNN GE3 121NNN GL3 19408B AG7
627NN UH0 879AN EA2 044NNN GE4 122NNN GL4 19408C AG7
629NN UG6 879BM EC1 045NNN GE5 123NNN GL5 19409A AH1
630NN UG7 879BN EA3 046NNN GE6 124NNN GL6 19409A AH3
631NN UG8 880AM EF8 047NNN GE7 125NNN GL7 19409B AG9
635NN UA3 880AN ED8 048NNN GE8 126NNN GL8 19409C AG9
636NN UA4 880BM EF9 049NNN GE9 127NNN GL9 19411A AH5
637NN UA5 880BN ED9 050NNN GF0 128NNN GM0 19411B AH1
640NN UA6 901AN EH8 051NNN GF1 129NNN GM1 19411C AH1
650NN UH1 901BN EH9 052NNN GF2 130NNN GM2 19412A AH9
651NN UH2 901CN EJ0 053NNN GF3 131NNN GM3 19412B AH5
652NN UH3 912NM EJ2 054NNN GF4 132NNN GM4 19412C AH5
653NN UH4 912NN EJ1 055NNN GF5 133NNN GM5 19413A AJ1
654NN UH5 959AM EJ5 056NNN GF6 134NNN GM6 19413B AH7
655NN UH6 959AN EJ3 070NNN GF7 140NNN WD1 19413C AH7
656NN UH7 959BM EJ6 071NNN GF8 141NNN WD2 19414A AJ3
657NN UH8 959BN EJ4 072NNN GF9 142NNN WD3 19414B AH9
658NN UH9 073NNN GG0 143NNN WD4 19414C AH9
163
ASME B18.24-2015
Treatment B Treatment B Treatment B Treatment B Treatment B
(Cont’d)
PIN21 PIN18
226NNN GQ7 286NNN GW7 414CNN SD0 456RNN SK0
19415A AJ5 227NNN GQ8 287NNN GW8 415ANN SD1 457FNN SK1
19415B AJ1 228NNN GQ9 288NNN GW9 415CNN SD2 457RNN SK2
19415C AJ1 229NNN GR0 289NNN GX0 416ANN SD3 458FNN SK3
19416A AJ7 230NNN GR1 290NNN GX1 416CNN SD4 458RNN SK4
19416B AJ3 231NNN GR2 291NNN GX2 417ANN SD5 459FNN SK5
19416C AJ3 232NNN GR3 292NNN GX3 417CNN SD6 459RNN SK6
19417A AJ9 233NNN GR4 293NNN WE2 418ANN SD7 460FNN SK7
19417B AJ5 234NNN GR5 294NNN WE5 418CNN SD8 460RNN SK8
19417C AJ5 235NNN GR6 295NNN WE6 419ANN SD9 461FNN SK9
19418A AK1 236NNN GR7 296NNN WE7 419CNN SE0 461RNN SL0
19418B AJ7 237NNN GR8 297NNN WE8 420ANN SE1 462FNN SL1
19418C AJ7 238NNN GR9 298NNN WF9 420CNN SE2 462RNN SL2
19419A AK3 239NNN GS0 299NNN WF0 421ANN SE3 46701N BE0
19419B AJ9 240NNN GS1 301NNN GX4 421CNN SE4 46701S BE1
19419C AJ9 241NNN GS2 302NNN GX5 422ANN SE5 46702N BE2
19420A AK5 242NNN GS3 303NNN GX6 422CNN SE6 46702S BE3
19420B AK1 243NNN GS4 310NNN GX7 423ANN SE7 46703N BE4
19420C AK1 244NNN GS5 311NNN GX8 423CNN SE8 46703S BE5
19421A AK7 245NNN GS6 312NNN GX9 424ANN SE9 46704N BE6
19421B AK3 246NNN GS7 313NNN GY0 424CNN SF0 46704S BE7
19421C AK3 247NNN GS8 320NNN WB1 425ANN SF1 46705N BE8
19422A AK9 248NNN GS9 321NNN WB2 425CNN SF2 46705S BE9
19422B AK5 249NNN GT0 322NNN WB3 426ANN SF3 46706N BF0
19422C AK5 250NNN GT1 323NNN WB4 426CNN SF4 46706S BF1
19423A AL1 251NNN GT2 324NNN WB6 427ANN SF5 46707N BF2
19423B AK7 252NNN GT3 325NNN WB7 427CNN SF6 46707S BF3
19423C AK7 253NNN GT4 326NNN WB9 428ANN SF7 46708N BF4
19424A AL3 254NNN GT5 327NNN WC0 428CNN SF8 46708S BF5
19424B AK9 255NNN GT6 330NNN WC1 429ANN SF9 46709N BF6
19424C AK9 256NNN GT7 331NNN WC2 429CNN SG0 46709S BF7
19425A AH7 257NNN GT8 400ANN SA1 430ANN SG1 46710N BF8
19425B AH3 258NNN GT9 400CNN SA2 430CNN SG2 46710S BF9
19425C AH3 259NNN GU0 401ANN SA3 431ANN SG3 46711N BG0
200NNN GN1 260NNN GU1 401CNN SA4 431CNN SG4 46711S BG1
201NNN GN2 261NNN GU2 402ANN SA5 433ANN SG5 46712N BG2
206NNN GN7 266NNN GU7 404CNN SB0 435CNN SH0 46714S BG7
207NNN GN8 267NNN GU8 405ANN SB1 436ANN SH1 46715N BG8
208NNN GN9 268NNN GU9 405CNN SB2 436CNN SH2 46715S BG9
209NNN GP0 269NNN GV0 406ANN SB3 437ANN SH3 46716N BH0
210NNN GP1 270NNN GV1 406CNN SB4 437CNN SH4 46716S BH1
215NNN GP6 275NNN GV6 409ANN SB9 450FNN SH9 46719N BH6
216NNN GP7 276NNN GV7 409CNN SC0 450RNN SJ0 46719S BH7
217NNN GP8 277NNN GV8 410ANN SC1 451FNN SJ1 46720N BH8
218NNN GP9 278NNN GV9 410CNN SC2 451RNN SJ2 46720S BH9
219NNN GQ0 279NNN GW0 411ANN SC3 452FNN SJ3 46721N BJ2
220NNN GQ1 280NNN GW1 411CNN SC4 452RNN SJ4 46721S BJ3
164
ASME B18.24-2015
Treatment B Treatment B Treatment B Treatment B Treatment B
(Cont’d)
PIN21 PIN18
46774M BR2 523PNN SR0 604NNN UD1 83604D DH1
46724S BJ9 46774T BR3 524HNN SR3 605NNN UD3 83605B DH3
46725N BK0 46775M BR4 524PNN SR2 606NNN UD6 83606C DH4
46725S BK1 46775T BR5 525HNN SR5 607NNN UE0 83607A DH6
46726N BK2 46776M BR6 525PNN SR4 608NNN UE1 83607D DH5
46726S BK3 46776T BR7 56301A AZ4 609NNN UE4 83608B DH7
46727N BK4 46777M BR8 56301B BB0 610NNN UE6 83609C DH8
46727S BK5 46777T BR9 56301C BB0 611NNN UE8 83610A DJ0
46728N BK6 46778M BS0 56301D BB0 612NNN UF0 83610D DH9
46728S BK7 46778T BS1 56302B AZ5 613NNN UF1 83611E DJ1
46729N BK8 46779M BS2 56302C BB1 614NNN UF2 83612F DJ2
46729S BK9 46779T BS3 56302D BB1 615NNN UF3 83613E DJ3
46730N BL0 470MNN SL3 56303C AZ9 616NNN UF4 83614F DJ4
46730S BL1 470SNN SL4 56304C BA0 617NNN UF6 83615E DJ5
46750M BL4 471MNN SL5 56305B AZ6 618NNN UF5 83616F DJ6
46750T BL5 471SNN SL6 56305C BB2 619NNN UB0 83617G DJ7
46751M BL6 472MNN SL7 56305D BB2 620NNN UG3
46751T BL7 472SNN SL8 56306B AZ7 621NNN UC0
46753M BL8 473MNN SL9 56306C BB3 622NNN UC7 Table B-136
46753T BL9 473SNN SM0 56306D BB3 623NNN UA2 Plating, Coating,
46754M BM0 474MNN SM1 56307B AZ8 624NNN UD9 and Passivation
46754T BM1 474SNN SM2 56307C BB4 625NNN UG5
46755M BM2 475MNN SM3 56320J BA2 626NNN UG9 PIN21 PIN18
46755T BM3 475SNN SM4 56320K BB8 627NNN UH0
46756M BM4 476MNN SM5 56321J BA3 629NNN UG6 01 DV
46756T BM5 476SNN SM6 56321K BB9 630NNN UG7 02 DW
46757M BM6 477MNN SM7 56322J BA4 631NNN UG8 03 DX
46757T BM7 477SNN SM8 56322K BC0 635NNN UA3 04 DY
46758M BM8 478MNN SM9 56323J BA5 636NNN UA4 05 DZ
46758T BM9 478SNN SN0 56323K BC1 637NNN UA5 06 E0
46759M BN0 479MNN SN1 56324J BA6 640NNN UA6 07 E1
46759T BN1 479SNN SN2 56324K BC2 650NNN UH1 08 E2
46760M BN2 480MNN SN3 56325J BA7 651NNN UH2 09 E3
46760T BN3 480SNN SN4 56325K BC3 652NNN UH3 0A D5
46761M BN4 481MNN SN5 56326J BA8 653NNN UH4 0B D6
46761T BN5 481SNN SN6 56326K BC4 654NNN UH5 0C D7
46762M BN6 482MNN SN7 56327J BA9 655NNN UH6 0D D8
46762T BN7 482SNN SN8 56327K BC5 656NNN UH7 0E D9
46763M BN8 483MNN SN9 56328J BB0 657NNN UH8 0F DA
46763T BN9 483SNN SP0 56328K BC6 658NNN UH9 0G DB
46764M BP0 484MNN SP1 56329J BB1 659NNN UJ0 0H DC
46764T BP1 484SNN SP2 56329K BC7 660NNN UJ1 0J DD
46765M BP2 485MNN SP3 56330J BB2 661NNN UJ2 0K DE
46765T BP3 485SNN SP4 56330K BC8 662NNN UJ3 0L DF
46766M BP4 486MNN SP5 59401A CR6 663NNN UJ4 0M DG
46766T BP5 486SNN SP6 59401D CR4 664NNN UJ5 0N DH
46767M BP6 487MNN SP7 59402A CS0 665NNN UJ6 0P DJ
46767T BP7 487SNN SP8 59402D CR8 666NNN UJ7 0Q DK
46768M BP8 488MNN SP9 59403A CS4 667NNN UJ8 0R DL
46768T BP9 488SNN SQ0 59403D CS2 668NNN UJ9 0S DM
46769M BQ0 500NNN SQ1 59404A CS7 669NNN UK0 0T DN
46769T BQ1 519HNN SQ3 59404D CS6 670NNN UK1 0U DP
46770M BQ4 519PNN SQ2 59405E CS8 671NNN UK2 0V DQ
46770T BQ5 520HNN SQ5 59406E CT0 672NNN UK3 0W DR
46771M BQ6 520PNN SQ4 59407C CT2 673NNN UK4 0X DS
46771T BQ7 521HNN SQ7 59407F CT3 83601A DG8 0Y DT
46772M BQ8 521PNN SQ6 600NNN UA7 83601D DG7 0Z DU
46772T BQ9 522HNN SQ9 601NNN UB7 83602B DG9 10 E4
46773M BR0 522PNN SQ8 602NNN UC8 83603C DH0 11 E5
46773T BR1 523HNN SR1 603NNN UA1 83604A DH2 12 E6
165
ASME B18.24-2015
Plating, Coating, Plating, Coating, Plating, Coating, Plating, Coating, Additional
and Passivation and Passivation and Passivation and Passivation Features:
(Cont’d) Internally
PIN21 PIN18 PIN21 PIN18 PIN21 PIN18 Threaded
PIN21 PIN18
72 FY EG B2 LJ D3 PIN21 PIN18
13 E7 73 FZ EH B3 LK D4
14 E8 74 G0 FA B4 MA L7 1 1
15 E9 75 G1 FB B5 MB L8 2 1
16 EA 76 G2 FC B6 MC L9
17 EB 77 G3 FD B7 MD LJ
18 EC 78 G4 FE B8 NA LA
19 ED 79 G5 FF B9 NB LB Table B-139
20 EE 80 G6 FG BA NC LC Additional
21 EF 81 G7 FH BB ND LD
Features:
22 EG 82 G8 FJ BC NE LE
Nonthreaded
23 EH 83 G9 FK BD NF LF
24 EJ 84 GA FL BE NG LG PIN21 PIN18
25 EK 85 GB FN BF NH LH
26 EL 86 GC GA BG PA LS 1 1
27 EM 87 GD GB BH PB LT 2 1
28 EN 88 GE GC BJ PC LU 3 2
29 EP 89 GF GD BK PD LV 4 1
30 EQ 90 GG GE BL PE LW 5 2
31 ER 91 GH GF BM PF LX 6 2
32 ES 92 GJ GG BN PG LY 7 2
33 ET 93 GK GH BP PH LZ 8 2
34 EU 94 GL GJ BQ QA LN
35 EV 95 GM GK BR QB LP
36 EW 96 GN GL BS QC LQ
37 EX AA A1 GM BT QD LR Table B-140
38 EY AB A2 HA C3 RA LK
Cross Reference:
39 EZ BA A3 HB C4 RB LL
Table 2-2 Tapping
40 F0 CA A4 HC C5 RC LM
CB A5 HD C6 SA BU
Screw Point AB
41 F1
42 F2 CC A6 HE C7 SB BV PIN21 PIN18
43 F3 CD A7 HF C8 SC BW
44 F4 CE A8 HG C9 SD BX T A
45 F5 CF A9 HH CA SE BY
46 F6 CG AA HJ CB SF BZ
47 F7 CH AB HK CC SG C0
48 F8 CJ AC HL CD SH C1 Table B-141
49 F9 CK AD HM CE SJ C2
Cross Reference:
50 FA CL AE HN CF TA M0
Table 2-2 Tapping
51 FB CM AF HP CG TB M1
Screw Point B
52 FC CN AG HQ CH
53 FD CP AH HR CJ PIN21 PIN18
54 FE CQ AJ JA CK
55 FF CR AK JB CL Table B-137 T B
56 FG DA AL JC CM Additional
57 FH DB AM KA CN Features:
58 FJ DC AN KB CP Externally
59 FK DD AS KC CQ Table B-142
Threaded
60 FL DE AT KD CR Cross Reference:
61 FM DF AU KE CS PIN21 PIN18 Table 2-2 Tapping
62 FN DG AP KF CT
Screw Point BF
63 FP DH AV KG CU 1 1
64 FQ DJ AQ LA CV 2 7 PIN21 PIN18
65 FR DK AW LB CW 3 6
66 FS DL AR LC CX 4 B T L
67 FT DM AX LD CY H 2
68 FU EA AY LE CZ
69 FV EB AZ LF D0
70 FW EC B0 LG D1
71 FX EF B1 LH D2
166
ASME B18.24-2015
Cross Reference: Cross Reference: Bridge to Table 3-7 Bridge to Cross Reference:
Table 2-2 Tapping Table 2-2 Tapping for AB, B, BF, BT Table 3-12 Table 7-9 Washer
Screw Point BP Screw Point T Component 3
MC 228 01 060
T P T T ME 291 A1 073 1 3
MG 351 A2 086 H 3
MJ 421 A3 099
MK 481 A4 112
Table B-144 Table B-150 MR 802 A5 125
Cross Reference: Cross Reference: MR 802 A6 138 Table B-161
Table 2-2 Tapping Table 2-2 Tapping MR 802 A7 151 Cross Reference:
Screw Point BT Screw Point U MS 952 A8 164 Table 7-9 Washer
A9 177 Component 4
PIN21 PIN18 PIN21 PIN18 AA 190
AB 216 PIN21 PIN18
T R T U Table B-154 AC 242
AD 1 4
Bridge to Table 3-7 268
AF 294 H 4
for D, F, T
AH 320
Table B-145 Table B-151 PIN21 PIN18 AJ 372
Cross Reference: Bridge to Table 3-6 Table B-162
Table 2-2 Tapping for AB, B, BF, GF 10Z
Cross Reference:
Screw Point C BP, BT MB 204
Table 7-9 Washer
MD 254 Table B-157
MF
Component 5
PIN21 PIN18 PIN21 PIN18 305 Bridge to
MG 356 Table 3-13 PIN21 PIN18
T C 01 060 MH 407
A1 073 ML 508 PIN21 PIN18 1 5
A2 086 MN 06A H 5
A3 099 MR 08B AA 190
Table B-146 A4 112 MT 10C AD 250
Cross Reference: A5 125 AG 312
Table 2-2 Tapping A6 138 AK 375 Table B-163
Screw Point D A7 151 AL 438 Cross Reference:
A8 164 Table B-155 AM 500 Table 7-9 Washer
PIN21 PIN18 AA 190 Bridge to AR 750 Component 6
AB 216 AS 875
T D Table 3-10
AD 250 B0 A00 PIN21 PIN18
AG 312 PIN21 PIN18 B1 A12
AK 375 B2 A25 1 6
AL 438 01 060 H 6
Table B-147 AM 500 A1 073
Cross Reference: A2 084
Table 2-2 Tapping A3 094 Table B-158
A4 112
Table B-164
Screw Point F Cross Reference: Cross Reference:
Table B-152 A5 126 Table 7-9 Washer
PIN21 PIN18 A6 136 Table 7-9 Washer
Bridge to Table 3-6 Component 1
A8 164 Component 7
T F
for C, D, F, G, T
AA 190 PIN21 PIN18
AD PIN21 PIN18
PIN21 PIN18 250
AG 312 1 1 1 7
A2 08B AK 375 H 1 H 7
Table B-148 A3 09B AL 438
Cross Reference: A4 11B AM 500
Table 2-2 Tapping A5 12B AP 625
Screw Point G A6 13B AR 750 Table B-159 Table B-165
A8 16B AS 875 Cross Reference:
Cross Reference:
PIN21 PIN18 AA 19B Table 7-9 Washer
Table 7-9 Washer
AD 25B
T G Component 2 Component 8
AG 31B
AK 37B PIN21 PIN18 PIN21 PIN18
AL 43B
AM 50B 1 2 1 8
H 2 H 8
167
ASME B18.24-2015
Cross Reference: Cross Reference: Bridge to Bridge to Bridge to
Table 7-9 Washer Table 7-9 Washer Table 3-11 Table 3-4 Table 7-10
Component 9 Component 11
A4 112 FE 012 1 P
1 9 1 B A5 125 FF 012
H 9 H B A6 13B FG 012
A8 16B FK 016
AA 190 FN 020
Table B-167 Table B-169 AB 21B FP 020
Cross Reference: AD 25B FR 024
Cross Reference:
AG 31B GF 010
Table 7-9 Washer Table 7-9 Washer
AK 375 ML 50M
Component 10 Component 12
MN 60M
PIN21 PIN18 MR 80M
PIN21 PIN18
MU 012
1 A 1 C MW 016
H A H C MY 020
ZM 024
Table B-Index B18.24 Legacy Table References From B18.24.1,

B18.24.2, and B18.24.3
B18.24 Table Cancelled Source Cancelled Source Reference
B-1 B18.24.1, B18.24.2, B18.24.3 B18.24.1 pg 1, B18.24.2 pg 1, and B18.24.3 pg 1
B-2 B18.24.1 pgs 1-2 and pgs 5-20
B-3 B18.24.2, B18.24.3 B18.24.2 pg 1 pgs 3-5, B18.24.3 pg 1 pgs 3-6
B-4 B18.24.1 pg 3
B-5 B18.24.2 pg 2
B-6 B18.24.1 pg 21
B-7 B18.24.2 pg 4
B-8 B18.24.1 pg 23
B-9 B18.24.2 pg 4
B-10 B18.24.1 pg 24
B-11 B18.24.1 pgs 21-22
B-12 B18.24.1 pg 23
B-13 B18.24.1 pg 24
B-14 B18.24.2 pg 5
B-15 B18.24.3 pg 7, upper left quadrant, Size
B-16 B18.24.3 pg 7, upper left quadrant, Length
B-17 B18.24.3 pg 7, upper right quadrant, Size #
B-18 B18.24.3 pg 8, upper left quadrant, Size #
B-20 B18.24.3 pg 8, upper right quadrant, Length
B-21 B18.24.3 pg 8, lower left quadrant, Size #
B-22 B18.24.3 pg 8, lower left quadrant, Length
B-27 B18.24.3 pg 10, upper right quadrant, Size
168
ASME B18.24-2015

B18.24.2, and B18.24.3 (Cont’d)
B-44 B18.24.3 pg 19, upper left quadrant, Shank Dia
B-45 B18.24.3 pg 19, upper left quadrant, OD
B-48 B18.24.3 pg 19, lower left quadrant, Size
B-49 B18.24.3 pg 19, lower left quadrant, Length
B-68 B18.24.3 pg 24, lower right quadrant, Size
B-69 B18.24.3 pg 24, lower right quadrant, Length
169
ASME B18.24-2015

B18.24.2, and B18.24.3 (Cont’d)
B-134 B18.24.1, B18.24.3 B18.24.1 pgs 25-35, B18.24.3 pgs 51-61
B-135 B18.24.2 pgs 6-15
B-136 B18.24.1, B18.24.2, B18.24.3 B18.24.1 pgs 36-38, B18.24.2 pgs 15-19,
B18.24.3 pgs 62-64
B-137 B18.24.1 pg 4
B-138 B18.24.2 pg 2
B-139 B18.24.3 pg 2
B-140 B18.24.1 pgs 8-18, Tapping Screw to AES*A
B-141 B18.24.1 pgs 8-18, Tapping Screw to AES*B
B-142 B18.24.1 pgs 8-18, Tapping Screw to AES*L
B-143 B18.24.1 pgs 8-18, Tapping Screw to AES*P
B-144 B18.24.1 pgs 8-18, Tapping Screw to AES*R
B-145 B18.24.1 pgs 8-18, Tapping Screw to AES*C
B-146 B18.24.1 pgs 8-18, Tapping Screw to AES*D
B-147 B18.24.1 pgs 8-18, Tapping Screw to AES*F
B-148 B18.24.1 pgs 8-18, Tapping Screw to AES*G
B-149 B18.24.1 pgs 8-18, Tapping Screw to AES*T
B-150 B18.24.1 pgs 8-18, Tapping Screw to AES*U
B-151 B18.24.1 pg 21, Inch Size
B-152 B18.24.1 pg 21, Inch Size
B-153 B18.24.1 pg 23, Metric Size
B-155 B18.24.1 pg 21, Inch Size
B-156 B18.24.1 pg 21, Inch Size
B-157 B18.24.1 pg 21, Inch Size
B-158 B18.24.1 pgs 18-20, SEMs
B-159 B18.24.1 pgs 18-20, SEMs
170
ASME B18.24-2015

B18.24.2, and B18.24.3 (Cont’d)
B-160 B18.24.1 pgs 18-20, SEMs
B-161 B18.24.1 pgs 18-20, SEMs
B-162 B18.24.1 pgs 18-20, SEMs
B-163 B18.24.1 pgs 18-20, SEMs
B-164 B18.24.1 pgs 18-20, SEMs
B-165 B18.24.1 pgs 18-20, SEMs
B-166 B18.24.1 pgs 18-20, SEMs
B-167 B18.24.1 pgs 18-20, SEMs
B-168 B18.24.1 pgs 18-20, SEMs
B-169 B18.24.1 pgs 18-20, SEMs
B-170 B18.24.1 pg 21, Inch Size
B-172 B18.24.1 pg 8, Wood Screws
171
ASME B18.24-2015
NONMANDATORY APPENDIX C
PART IDENTIFYING NUMBER SYSTEM FOR BENT BOLTS
PER ASME B18.31.5
C-1 PART IDENTIFYING NUMBERS (PINs) FOR bolt, it is generally the length of the bolt in tenths of
SELECTED BENT BOLTS an inch. For example, 027 would represent a length of
2.75 inches. If another bolt is of the same diameter and
PINs are provided herein for selected bent bolts for
general configuration with the same length but a differ-
common logistics identification between designers, fas-
ent width, it may be designated by 028.
tener manufacturers, construction and repair activities,
and equipment operators. PINs are required for military C-2.1 PIN Coverage for Addition Lengths
applications and provide a concise method of identi-
For some configurations as indicated in the tables, the
fying parts in all applications. PINs are provided for
PIN Field permits lengths other than those listed as
only those bent bolts of configurations and materials
standard to be designated.
most commonly used. For part configurations and mate-
rials not covered, an alternate method of identifying C-2.2 Identification of Materials and Finishes
parts is identified in this Standard. Bolts with different
Table C-1 identifies materials covered by the PIN sys-
dimensions will be considered for addition in future
tem with a two-character field. Table C-2 identifies fin-
revisions. Inclusion in this Standard does not guarantee
ishes covered by the PIN with a three-character field,
availability.
although use of the second and third characters is
optional.
C-2 THE PIN SYSTEM
Figure C-1 illustrates the PIN system. The system con- C-3 IDENTIFICATION OF PART NUMBERING
sists of seven fields in the order identified in Fig. C-1.
SYSTEM ON DRAWINGS
There are no blank spaces in the PIN. The two-digit On drawings or parts lists where a column exists for
number for Field 3, the diameter of the bolt, and Field 5, identifying the manufacturer or its Commercial and
representing other dimensional characteristics, are Government Entity Code, indicate the CAGE Code
found in the dimensional table for the applicable bent “05047/B18.31.5” or “ASME B18.31.5”. If no column
bolt configuration. The Field 3 diameter is generally exists or there is space only for the five-digit CAGE
the diameter in sixteenths of an inch. Although Field 5 Code, then a note must indicate that the part numbers
represents all the remaining dimensions of the applicable are defined in ASME B18.31.5.
172
ASME B18.24-2015
Fig. C-1 Part Identification Number (PIN) System for Bent Bolts
Fields
1 2 3 4 5 6 7
AE315 B XX T LCT YY ZZZ Field Description
Finish (See Table C-2)
Material (See Table C-1)
LCT Dash Number (Three digits from

applicable configuration table)
Thread Form
F, UNF Thread
C, UNC Thread
Diameter Dash Number (From applicable

configuration table)
Bent Bolt Configuration

C, Table 3, Eyebolt, closed
P, Table 4, Eyebolt, open
A, Table 6, Hook bolt, acute angle
L, Table 5, Hook bolt, right angle bend (L hook)
R, Table 7, Hook bolt, round bend
U, Table 1, U-bolt, round bend
W, Table 2, U-bolt, square bend
ASME B18.31.5 Bent Bolt Standard
173
ASME B18.24-2015
Table C-1 Materials for Bent Bolts

Field 5
Designator Material Standard Material Grade/Alloy Description UNS No.
Nonferrous Materials
A2 ASTM F468 Aluminum Alloy 2024 ... A92024

B2 ASTM F468 Brass Alloy 260 or 270 ... C26000 or
C27000
L5 ASTM F468 Cu 655 [Note (1)] Silicon bronze C65500
N4 ASTM F468 Ni 400 [Note (2)] Nickel-copper N04400
Stainless Steel Materials
C3 ASTM F593 Alloy Group 1 or 2 Cold Worked 300 Series Stainless Steel As permitted by
ASTM F593
C4 ASTM F593 Alloy 304 from Group 1 Cold Worked 304 Stainless Steel S30400
C6 ASTM F593 Alloy Group 2 Cold Worked 316 Stainless Steel S31600
Carbon and Alloy Steel Materials
S1 SAE J429 Grade 1 Low or Medium Carbon Steel ...

S2 SAE J429 Grade 2 Low or Medium Carbon Steel ...
S5 SAE J429 Grade 5 Medium Carbon Steel ...
S8 SAE J429 Grade 8 Medium Carbon Alloy Steel ...
S3 ASTM F1554 [Note (3)] Grade 36 Low Carbon Steel ...
S6 ASTM F1554 [Note (3)] Grade 55 Low Alloy Steel ...
S7 ASTM A307 Grade A Carbon Steel ...
B7 ASTM A193/A193M Grade 7 Chrome-Molybdenum Steel ...
L7 ASTM A320/A320M Grade 17 Alloy Steel for Low Temperature ...
NOTES:
(1) The higher strength Alloy C651 may be substituted for Alloy C655.
(2) Ni-Cu Alloy 405 per ASTM F468 may be substituted for diameters greater than 0.750 in.
(3) This specification has dimensional requirements that should be referenced when ordering.
174
ASME B18.24-2015
Table C-2 Finish Designations for Bent Bolts

ASTM F1941 Electrodeposited Coatings
Chromate Finish
First Second Third
Letter Letter Letter
Field 6 Designation Type Coating Designator Thickness, in. Designator Type Designator
Select the three designators Fe/Cd D 0.0001 3 Clear A

that describe the coating Fe/Zn Z 0.0002 5 Bright blue B
[Note (1)] Fe/Zn-Co C 0.0003 8 Yellow C
Fe/Zn-NI [Note (2)] N 0.0005 X Opaque D
Black E
Organic F
ASTM F2329
... Hot-dip Galvanizing G ... ... ... ...
ASTM B695
... Mechanically Deposited Zinc M ... ... ... ...
NOTES:
(1) The second and third letter designators may be deleted if the purchaser wants to leave these characteristics as a manufacturer’s
option.
(2) For this type coating either opaque, black, or organic type chromate finish may apply.
175
INTENTIONALLY LEFT BLANK
176
ASME B18.24-2015
M18615

Asme B18.24-2015

Uploaded by

Copyright:

Available Formats

Asme B18.24-2015

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Asme B18.24-2015

Uploaded by

Copyright:

Available Formats

ASME B18.

Two Park Avenue • New York, NY • 10016 USA

ASME issues written replies to inquiries concerning interpretations of technical aspects

ASME is the registered trademark of The American Society of Mechanical Engineers.

No part of this document may be reproduced in any form,

The American Society of Mechanical Engineers

STANDARDS COMMITTEE OFFICERS

STANDARDS COMMITTEE PERSONNEL

SUBCOMMITTEE 24 — PIN CODE SYSTEM FOR B18 FASTENERS

PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD

1 INTRODUCTORY NOTES 2.2 Alpha “I” and “O”

3 PIN CODE STRUCTURE

B18 Fastener PIN Example

18 characters Field 1 Field 2 Field 3 Field 4 Field 5 Field 6 Field 7

General data for 18-digit B18 PINs

Field Field Name Field Length Table References Page Number(s)

2 Fastener Thread Configuration Character 6 Tables 2-1 and 2-2 25

3 Fastener Size Characters 7–9 Tables 3-1 through 3-29 25–38

4 Length/Other Dimensions Characters 10–12 Tables 4-1 through 4-6 38–42

7 Additional Features Character 18 Tables 7-1 through 7-14 118, 119

To begin, the user would refer to Table 1-1 which is

The following is excerpted from Table 1-1:

AEB01 Bolts, Square 2-1 3-1 4-1 5-* 6-* 7-1

AEB05 Bolts, Hex 2-1 3-3 4-2 5-* 6-* 7-2

B18.2.3.6M Metric Heavy Hex Bolts Field 2 3 4 5 6 7

B18.9 Plow Bolts (Inch Series) Field 2 3 4 5 6 7

PIN p AEB02, the user would interpret the remainder

Attributes Attribute Values

1 5 1–5 AEB02 1–1 → PIN Spec ASME B18.24

Table 1-1 Fastener Family and Type/Base PIN

B18.2.3.5M Metric Hex Bolts Field 2 3 4 5 6 7

B18.2.3.6M Metric Heavy Hex Bolt Field 2 3 4 5 6 7

B18.2.3.7M Metric Heavy Hex Structural Bolt Field 2 3 4 5 6 7

B18.2.3.10M Metric Square Head Bolts Field 2 3 4 5 6 7

B18.2.6 Fasteners for Use in Structural Applications (Inch Series) Field 2 3 4 5 6 7

B18.2.6M Metric Fasteners for Use in Structural Applications Field 2 3 4 5 6 7

Table 1-1 Fastener Family and Type/Base PIN (Cont’d)

B18.5 Round Head Bolts (Inch Series) Field 2 3 4 5 6 7

B18.5.2.1M Metric Round Head Short Square Neck Bolts Field 2 3 4 5 6 7

B18.5.2.2M Metric Round Head Square Neck Bolts Field 2 3 4 5 6 7

B18.9 Plow Bolts (Inch Series) Field 2 3 4 5 6 7

B18.10 Track Bolts and Nuts (Inch Series) Field 2 3 4 5 6 7

B18.29.3 Tangless Helical Coil Screws Thread Inserts“Free Field 2 3 4 5 6 7

Table 1-1 Fastener Family and Type/Base PIN (Cont’d)

Keys and Keyways

B18.25.1M Metric Square and Rectangular Keys and Keyways Field 2 3 4 5 6 7

B18.25.2M Metric Woodruff Keys and Keyways Field 2 3 4 5 6 7

Screw and Washer Assemblies — Screw Component

Table 1-1 Fastener Family and Type/Base PIN (Cont’d)

Screw and Washer Assemblies — Screw Component (Cont’d)

B18.13 Screw and Washer Assemblies (Inch Series) (Cont’d) Field 2 3 4 5 6 7

Table 1-1 Fastener Family and Type/Base PIN (Cont’d)

Screw and Washer Assemblies — Screw Component (Cont’d)

B18.13 Screw and Washer Assemblies (Inch Series) (Cont’d) Field 2 3 4 5 6 7

Table 1-1 Fastener Family and Type/Base PIN (Cont’d)

Screw and Washer Assemblies — Screw Component (Cont’d)

B18.13 Screw and Washer Assemblies (Inch Series) (Cont’d) Field 2 3 4 5 6 7

B18.13.1M Metric Screw and Washer Assemblies Field 2 3 4 5 6 7

Table 1-1 Fastener Family and Type/Base PIN (Cont’d)