Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    CPM FMR 22 002

    Uploaded by

    Mark Darrel Aranas
    This flange management report summarizes the inspection of four flanges on a hydraulic cylinder. All flanges were found to be properly aligned and parallel with no damage. The bolts were lubricated and torqued to the specified values. The inspection found the flanges were in acceptable condition and properly tightened.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CPM FMR 22 002

    Uploaded by

    Mark Darrel Aranas
    30 views1 page
    This flange management report summarizes the inspection of four flanges on a hydraulic cylinder. All flanges were found to be properly aligned and parallel with no damage. The bolts were lubricated and torqued to the specified values. The inspection found the flanges were in acceptable condition and properly tightened.

    Original Title

    CPM-FMR-22-002

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This flange management report summarizes the inspection of four flanges on a hydraulic cylinder. All flanges were found to be properly aligned and parallel with no damage. The bolts were lubricated and torqued to the specified values. The inspection found the flanges were in acceptable condition and properly tightened.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views1 page

    CPM FMR 22 002

    Uploaded by

    Mark Darrel Aranas
    This flange management report summarizes the inspection of four flanges on a hydraulic cylinder. All flanges were found to be properly aligned and parallel with no damage. The bolts were lubricated and torqued to the specified values. The inspection found the flanges were in acceptable condition and properly tightened.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    FLANGE MANAGEMENT REPORT

    CLIENT : SHIFT WORK ORDER NO. : 84542983


    PROJECT : EMS-ITMS REPORT NO. : CPM-FMR-22-002
    TAG NO. : Z-2803 HYDRAULIC CYLINDER (INBOARD/OUTBOARD) SHEET NO. : 1 OF 1
    AREA/UNIT : Jetty 3 DATE : September 12, 2022

    Flange Joint Number F1 F2 F3 F4

    Z-2803 INBOARD

    Z-2803 INBOARD

    OUTBOARD

    OUTBOARD
    FLANGE 1

    FLANGE 2

    FLANGE 2

    FLANGE 2
    Z-2803

    Z-2803
    DESCRIPTION

    Flange Size (NPS) N.A N.A N.A N.A


    Flange Rating (#) N.A N.A N.A N.A

    Flange Face Clean and No Damage P P P P

    Flange Alligned and Parallel (Note 1)


    ● Radial Misalignment ( mm ) D1 0 0 0 0
    D2 0 0 0 0
    ● Lateral Misalignment ( mm ) D 0 0 0 0
    Bolt Holes Alligned / Parallel P P P P
    Bolt Pre-Install (free-running) P P P P
    Type of Gasket N.A N.A N.A N.A
    Type of Bolts M16 M16 M16 M16
    Type of Nuts B7 B7 B7 B7
    Type of Bolt Lubricant Used N.A N.A N.A N.A
    Bolt Size (in) 5/8 5/8 5/8 5/8
    Torque Value (ft-lb 1st Pass) 26 26 26 26
    Torque Value (ft-lb 2nd Pass) 53 53 53 53
    Torque Value (ft-lb 3rd Pass) 81 81 81 81

    Hydraulic Pump Pressure Final / Torque Head N.A N.A N.A N.A

    Tightening Complete YES YES YES YES


    Notes: ACC ACC ACC ACC

    SUPERVISOR / FOREMAN / LEADMAN


    Notes:
    1.) Misalignment (lateral<3.0mm, radial<1mm in 200mm) 2.) Gasket in good condition, marking match on flange, centralized on the studs.
    3.) Legend: (used for the identification of Gasket/Bolts & Nuts Used)
    GASKET BOLTS NUTS
    SW Spiral wound gasket B7 ASTM A193 - Grade B7 2H ASTM A194 - Grade 2H
    CNAF Compressed Non-Abestos Fiber Gasket L7 ASTM A320 - Grade L7 4L ASTM A194 - Grade 4L
    KP KammProfile Gasket B16 ASTM A193 - Grade B16 4L ASTM A194 - Grade 4L
    R Rubber Gasket SS Stainless Steel SS Stainless Steel
    DJ Double Jacketed Gasket LUBRICANT NC Nickel Compound

    Dimension (D) Dimension 1 (D1)

    Signature
    CPM QA/QC SHIFT

    Dimension 2 (D2) Name : M. MACATANGAY Name :


    LATERAL MISALIGNMENT RADIAL MISALIGNMENT Date : SEPTEMBER 12, 2022 Date :

    Form No. : ITRF-FMR-01 (Rev. 0) CPM Construction and General Services, Inc.

    You might also like