NATIONAL AEROSPACE STANDARD

© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

FED. SUPPLY CLASS

5325
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

ARLINGTON, VA 22209
1000 WILSON BLVD.
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

REVISION DATE: MARCH 10, 2009

ISSUE DATE: APRIL 1998
REVISION DATE.

THE INITIAL RELEASE OF THIS DOCUMENT SUPERSEDES MS21209, REVISION E. PART NUMBERS REMAIN MS21209.

THIRD CUSTODIAN REVISION

ANGLE
PROJECTION NATIONAL AEROSPACE STANDARDS COMMITTEE 2
PROCUREMENT TITLE CLASSIFICATION
FORM 08-02

SPECIFICATION PART STANDARD

INSERT, SCREW THREAD, COARSE AND FINE,
NASM8846 SCREW LOCKING, HELICAL COIL, CRES
NASM21209
SHEET 1 OF 8
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---

Copyright Aerospace Industries Association of America Inc.

CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

ARLINGTON, VA 22209
1000 WILSON BLVD.

--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---
TABLE I. Dash numbers and dimensions for coarse thread series
1 DIAMETER NOMINAL LENGTH 1.5 DIAMETER NOMINAL LENGTH
NOMINAL DASH LENGTH WEIGHT M N DASH LENGTH WEIGHT M N
THREAD NO. (REF) LBS/100 ±1 ±1/4 NO. (REF) LBS/100 ±1 ±1/4
SIZE COIL COIL COIL COIL

.086-56 C0210 .086 .0051 1.500 3.00 C0215 .129 .0084 2.625 5.250
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

.099-48 C0310 .099 .0077 1.4375 2.875 C0315 .148 .0125 2.500 5.000
.112-40 C0410 .112 .0121 1.375 2.750 C0415 .168 .0196 2.375 4.750
.125-40 C0510 .125 .0154 1.625 3.250 C0515 .188 .0250 2.750 5.500
.138-32 C0610 .138 .0243 1.375 2.750 C0615 .207 .0384 2.375 4.750
.164-32 C0810 .164 .0355 1.750 3.500 C0815 .246 .0556 3.000 6.000
.190-24 C1-10 .190 .0573 1.4375 2.875 C1-15 .285 .0899 2.500 5.000
.216-24 C2-10 .216 .077 1.750 3.500 C2-15 .324 .119 3.000 6.000
.250-20 C4-10 .250 .145 1.6875 3.375 C4-15 .375 .196 2.875 5.750
.3125-18 C5-10 .3125 .232 2.000 4.000 C5-15 .469 .369 3.3125 6.625
.375-16 C6-10 .375 .391 2.1875 4.375 C6-15 .562 .625 3.625 7.250
.4375-14 C7-10 .4375 .667 2.250 4.500 C7-15 .656 .943 3.6875 7.375
.500-13 C8-10 .500 .794 2.4375 4.875 C8-15 .750 1.316 3.9375 7.875
.5625-12 C9-10 .5625 1.235 2.5625 5.125 C9-15 .844 1.961 4.125 8.250
.625-11 C1010 .625 1.515 2.6250 5.250 C1015 .938 2.439 4.250 8.500
.750-10 C1210 .750 2.778 2.9375 5.875 C1215 1.125 4.000 4.6875 9.375
.875-9 C1410 .875 4.545 3.125 6.250 C1415 1.312 6.250 5.000 10.000
1.000-8 C1610 1.000 5.882 3.1875 6.375 C1615 1.500 9.091 5.0625 10.125
1.125-7 C1810 1.125 8.392 3.0625 6.125 C1815 1.688 12.928 4.9375 9.875
1.250-7 C2010 1.250 10.487 3.500 7.000 C2015 1.875 16.070 5.625 11.250
REVISION DATE.

1.375-6 C2210 1.375 14.505 3.250 6.500 C2215 2.062 22.264 5.250 10.500
1.500-6 C2410 1.500 17.563 3.625 7.250 C2415 2.250 26.915 5.750 11.500

REVISION

2
FORM 08-02

NASM21209
SHEET 2
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
Copyright Aerospace Industries Association of America Inc.
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

TABLE I. Dash numbers and dimensions for coarse thread series (Continued)
2 DIAMETER NOMINAL LENGTH 2.5 DIAMETER NOMINAL LENGTH
NOMINAL DASH LENGTH WEIGHT M N DASH LENGTH WEIGHT M N
THREAD NO. (REF) LBS/100 ±1 ± 1/4 NO. (REF) LBS/100 ±1 ±1/4
SIZE
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

COIL COIL COIL COIL

.086-56 C0220 .172 .0117 3.6875 7.375 C0225 .215 .015 5.9375 9.625
.099-48 C0320 .198 .0174 3.625 7.250 C0325 .248 .0224 5.750 9.375
.112-40 C0420 .224 .0272 3.375 6.750 C0425 .280 .0348 5.500 8.875
.125-40 C0520 .250 .0345 3.875 7.750 C0525 .312 .044 6.125 10.000
.138-32 C0620 .276 .0525 3.4375 6.875 C0625 .345 .0666 5.4375 8.875
.164-32 C0820 .328 .0776 4.1875 8.375 C0825 .410 .1008 6.5625 10.750
.190-24 C1-20 .380 .1330 3.5625 7.125 C1-25 .475 .172 5.6875 9.250
.216-24 C2-20 .432 .172 4.1875 8.375 C2-25 .540 .208 6.4375 10.625
.250-20 C4-20 .500 .308 4.000 8.000 C4-25 .625 .385 6.375 10.375
ARLINGTON, VA 22209
1000 WILSON BLVD.

.3125-18 C5-20 .625 .510 4.625 9.250 C5-25 .781 .658 7.250 11.875
.375-16 C6-20 .750 .862 5.000 10.000 C6-25 .938 1.064 7.875 12.875
.4375-14 C7-20 .875 1.250 5.125 10.250 C7-25 1.094 1.667 8.000 13.125
.500-13 C8-20 1.000 1.852 5.500 11.000 C8-25 1.250 2.273 8.625 14.125
.5625-12 C9-20 1.125 2.632 5.750 11.500 C9-25 1.406 3.226 9.000 14.750
.625-11 C1020 1.250 3.448 5.875 11.750 C1025 1.562 4.348 9.125 15.000
.750-10 C1220 1.500 5.263 6.500 13.000 C1225 1.875 6.667 10.000 16.500
.875-9 C1420 1.750 8.333 6.875 13.750 C1425 2.188 10.000 10.625 17.500
1.000-8 C1620 2.000 12.500 7.000 14.000 C1625 2.500 14.286 10.750 17.750
1.125-7 C1820 2.250 17.464 6.8125 13.625 C1825 2.812 22.000 10.6875 17.500
1.250-7 C2020 2.500 21.653 7.6875 15.375 C2025 3.125 27.236 11.8125 19.500
1.375-6 C2220 2.750 30.122 7.1875 14.375 C2225 3.438 37.981 11.1875 18.375
1.500-6 C2420 3.000 36.268 7.9375 15.875 C2425 3.750 45.620 12.1875 20.125

TABLE I. Dash numbers and dimensions for coarse thread series

(Continued)
3 DIAMETER NOMINAL LENGTH
NOMINAL DASH LENGTH WEIGHT M N
THREAD NO. (REF) LBS/100 ±1 ±1/4
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

SIZE COIL COIL

.086-56 C0230 .258 .0183 8.1875 11.875
.099-48 C0330 .297 .0271 7.875 11.500
.112-40 C0430 .336 .0423 7.500 10.875
.125-40 C0530 .375 .0536 8.375 12.250
.138-32 C0630 .414 .0807 7.4375 10.750
.164-32 C0830 .492 .125 9.0625 13.250
.190-24 C1-30 .570 .219 7.8125 11.375
.216-24 C2-30 .648 .279 8.9375 13.125
.250-20 C4-30 .750 .490 8.750 12.750
.3125-18 C5-30 .938 .806 10.000 14.625
.375-16 C6-30 1.125 1.316 10.875 15.750
.4375-14 C7-30 1.312 2.000 11.000 16.125
.500-13 C8-30 1.500 2.857 11.625 17.125
.5625-12 C9-30 1.688 4.000 12.125 17.875
.625-11 C1030 1.875 5.263 12.500 18.375
.750-10 C1230 2.250 8.333 13.625 20.125
.875-9 C1430 2.625 12.500 14.375 21.250
1.000-8 C1630 3.000 16.670 14.625 21.625
REVISION DATE.

1.125-7 C1830 3.375 26.536 14.4375 21.250

1.250-7 C2030 3.750 32.819 16.0625 23.750
1.375-6 C2230 4.125 45.839 15.0625 22.250
1.500-6 C2430 4.500 54.972 16.5625 24.500

REVISION

2
FORM 08-02

NASM21209
--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`--- SHEET 3
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
Copyright Aerospace Industries Association of America Inc.
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

TABLE II. Dash numbers and dimensions for fine thread series.
1 DIAMETER NOMINAL LENGTH 1.5 DIAMETER NOMINAL LENGTH
NOMINAL DASH LENGTH WEIGHT M N DASH LENGTH WEIGHT M N
THREAD NO. (REF) LBS/100 ±1 ±1/4 NO. (REF) LBS/100 ±1 ±1/4
SIZE COIL COIL COIL COIL
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

.099-56 F0310 .099 .0051 1.6875 3.375 F0315 .148 .0084 2.8125 5.625
.112-48 F0410 .112 .0099 1.6875 3.375 F0415 .168 .0160 2.8125 5.625
.138-40 F0610 .138 .020 1.750 3.500 F0615 .207 .0304 3.000 6.000
.164-36 F0810 .164 .0325 1.9375 3.875 F0815 .246 .0502 3.250 6.500
.190-32 F1-10 .190 .0474 2.0625 4.125 F1-15 .285 .0784 3.4375 6.875
.250-28 F4-10 .250 .109 2.500 5.000 F4-15 .375 .155 4.125 8.250
.3125-24 F5-10 .312 .180 2.750 5.500 F5-15 .469 .284 4.4375 8.875
.375-24 F6-10 .375 .259 3.4375 6.875 F6-15 .562 .420 5.500 11.000
ARLINGTON, VA 22209

.4375-20 F7-10 .438 .459 3.3125 6.625 F7-15 .656 .699 5.3125 10.625
1000 WILSON BLVD.

.500-20 F8-10 .500 .595 3.9375 7.875 F8-15 .750 .909 6.1875 12.375
.5625-18 F9-10 .562 .826 4.000 8.000 F9-15 .844 1.266 6.250 12.500
.625-18 F1010 .625 1.010 4.500 9.000 F1015 .938 1.562 7.0625 14.125
.750-16 F1210 .750 1.695 4.875 9.750 F1215 1.125 2.564 7.5625 15.125
.875-14 F1410 .875 2.564 4.9375 9.875 F1415 1.312 4.000 7.750 15.500
1.000-12 F1610 1.000 3.875 4.8125 9.625 F1615 1.500 6.063 7.500 15.000
1.125-12 F1810 1.125 4.917 5.5625 11.125 F1815 1.688 7.572 8.625 17.250
1.250-12 F2010 1.250 6.254 6.250 12.500 F2015 1.875 9.502 9.6875 19.375
1.375-12 F2210 1.375 7.359 6.875 13.750 F2215 2.062 11.276 10.6875 21.375
1.500-12 F2410 1.500 8.799 7.625 15.250 F2415 2.250 13.650 11.750 23.500

TABLE II. Dash numbers and dimensions for fine thread series (Continued).
2 DIAMETER NOMINAL LENGTH 2.5 DIAMETER NOMINAL LENGTH
NOMINAL DASH LENGTH WEIGHT M N DASH LENGTH WEIGHT M N
THREAD NO. (REF) LBS/100 ±1 ±1/4 NO. (REF) LBS/100 ±1 ±1/4
SIZE COIL COIL COIL COIL

.099-56 F0320 .198 .0117 4.000 8.000 F0325 .248 .0192 6.375 10.375
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST

.112-48 F0420 .224 .0222 3.9375 7.875 F0425 .280 .0285 6.3125 10.250
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

.138-40 F0620 .276 .0408 4.1875 8.375 F0625 .345 .0512 6.5625 10.750
.164-36 F0820 .328 .0680 4.5625 9.125 F0825 .410 .0857 7.0625 11.625
.190-32 F1-20 .380 .112 4.750 9.500 F1-25 .475 .140 7.500 12.000
.250-28 F4-20 .500 .212 5.6875 11.375 F4-25 .625 .276 8.8125 14.500
.3125-24 F5-20 .625 .397 6.125 12.250 F5-25 .781 .490 9.500 15.625
.375-24 F6-20 .750 .553 7.500 15.000 F6-25 .938 .709 11.625 19.125
.4375-20 F7-20 .875 .917 7.3125 14.625 F7-25 1.094 1.250 11.1875 18.500
.500-20 F8-20 1.000 1.234 8.4375 16.875 F8-25 1.250 1.563 12.9375 21.375
.5625-18 F9-20 1.125 1.695 8.5625 17.125 F9-25 1.406 2.128 13.1875 21.750
.625-18 F1020 1.250 2.083 9.625 19.250 F1025 1.562 2.632 14.625 24.250
.750-16 F1220 1.500 3.448 10.3125 20.625 F1225 1.875 4.348 15.6875 26.000
.875-14 F1420 1.750 5.263 10.5625 21.125 F1425 2.188 6.667 16.0625 26.625
1.000-12 F1620 2.000 8.188 10.250 20.500 F1625 2.500 10.406 15.750 26.000
1.125-12 F1820 2.250 10.227 11.6875 23.375 F1825 2.812 12.882 17.8125 29.500
1.250-12 F2020 2.500 12.750 13.125 26.250 F2025 3.125 15.998 19.875 33.000
1.375-12 F2220 2.750 15.194 14.4375 28.875 F2225 3.438 19.111 22.0625 36.500
1.500-12 F2420 3.000 18.501 15.8125 31.625 F2425 3.750 23.352 24.0625 39.875
REVISION DATE.

REVISION

2
FORM 08-02

NASM21209
--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---
SHEET 4
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
Copyright Aerospace Industries Association of America Inc.
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

TABLE II. Dash numbers and dimensions for fine thread series
(Continued)
3 DIAMETER NOMINAL LENGTH
NOMINAL DASH LENGTH WEIGHT M N
THREAD NO. (REF) LBS/100 ±1 ±1/4
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

SIZE COIL COIL

.099-56 F0330 .297 .0234 8.625 12.625

.112-48 F0430 .336 .0346 8.5625 12.500
.138-40 F0630 .414 .0616 9.0625 13.250
.164-36 F0830 .492 .1034 9.6875 14.250
.190-32 F1-30 .570 .170 10.125 14.875
.250-28 F4-30 .750 .338 11.9375 17.625
.3125-24 F5-30 .938 .602 12.875 19.000
ARLINGTON, VA 22209

.375-24 F6-30 1.125 .862 15.625 23.125

1000 WILSON BLVD.

.4375-20 F7-30 1.312 1.493 15.1875 22.500

.500-20 F8-30 1.500 1.887 17.4375 25.875
.5625-18 F9-30 1.688 2.564 17.6875 26.250
.625-18 F1030 1.875 3.030 19.750 29.375
.750-16 F1230 2.250 5.263 21.1875 31.500
.875-14 F1430 2.625 7.692 21.6875 32.250
1.000-12 F1630 3.000 12.815 21.250 31.500
1.125-12 F1830 3.375 15.536 24.0625 35.750
1.250-12 F2030 3.750 19.246 26.750 39.875
1.375-12 F2230 4.125 23.028 29.5625 44.000
1.500-12 F2430 4.500 28.203 32.3125 48.125

TABLE III. Insert dimensions coarse thread

NOMINAL A B C D E F
THREAD MIN MIN MAX GAGE MIN MAX MIN MAX MIN MAX
SIZE

.086-56 .0027 .0163 .0193 .00893 .0112 .0116 .0126 .0156 .110 .119
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

.099-48 .0043 .0196 .0226 .01042 .01313 .01353 .0152 .0182 .128 .137
.112-40 .0068 .0241 .0271 .0125 .01584 .01624 .0189 .0219 .144 .159
.125-40 .0068 .0241 .0271 .0125 .01584 .01624 .0189 .0219 .158 .173
.138-32 .0076 .0295 .0338 .01563 .01985 .02030 .0233 .0273 .178 .193
.164-32 .0076 .0295 .0338 .01563 .01985 .02030 .0233 .0273 .205 .220
.190-24 .0120 .0410 .0449 .02083 .02656 .02706 .0305 .0365 .244 .259
.216-24 .0120 .0410 .0449 .02083 .02656 .02706 .0305 .0365 .270 .285
.250-20 .0164 .050 .0540 .02500 .03198 .03248 .0378 .0438 .310 .330

--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---
.3125-18 .0176 .056 .060 .02778 .03558 .03608 .0416 .0486 .380 .400
.375-16 .0215 .0636 .0677 .03125 .04009 .04059 .0477 .0547 .452 .472
.4375-14 .0267 .0730 .0770 .03571 .04589 .04639 .0545 .0625 .526 .551
.500-13 .0273 .0758 .0829 .03846 .04946 .04996 .0593 .0673 .597 .622
.5625-12 .0334 .0861 .0900 .04167 .05363 .05413 .0649 .0729 .669 .694
.625-11 .0351 .0909 .0980 .04545 .05855 .05905 .0715 .0795 .742 .767
.750-10 .0402 .1007 .1079 .05000 .06445 .06495 .0795 .0875 .881 .906
.875-9 .0466 .1124 .1199 .05556 .07167 .07217 .0892 .0972 1.022 1.052
1.000-8 .0544 .1264 .1350 .06250 .08069 .08119 .1004 .1094 1.166 1.196
1.125-7 .0645 .1451 .1546 .07143 .09229 .09279 .1160 .1250 1.315 1.355
1.250-7 .0645 .1451 .1546 .07143 .09229 .09279 .1160 .1250 1.443 1.483
REVISION DATE.

1.375-6 .0775 .1695 .1799 .08333 .10775 .10825 .1368 .1458 1.598 1.643
1.500-6 .0775 .1695 .1799 .08333 .10775 .10825 .1368 .1458 1.727 1.772

REVISION

2
FORM 08-02

NASM21209
SHEET 5
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
Copyright Aerospace Industries Association of America Inc.
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

TABLE III. Insert dimensions coarse thread (Continued)

NOMINAL G H J K L P S R T
THREAD MIN MAX MIN MAX MIN MAX ±.250 MIN MIN
SIZE COIL
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

.086-56 .067 .085 75° 150° .103 .111 4 1 3 1.50 .0032 .0056
.099-48 .070 .090 75° 150° .128 .137 4 1 3 1.50 .0038 .0065
.112-40 .070 .105 25° 100° .144 .159 4 1 3 1.75 .0045 .0078
.125-40 .078 .108 25° 100° .158 .173 4 1 3 1.62 .0045 .0078
.138-32 .091 .135 25° 100° .178 .193 4 1 3 1.75 .0056 .0098
.164-32 .117 .152 20° 100° .205 .220 4 1 3 1.75 .0056 .0098
.190-24 .138 .183 20° 90° .244 .259 4 1 3 1.75 .0075 .0130
.216-24 .154 .189 20° 90° .270 .285 4 1 - - .0075 .0130
ARLINGTON, VA 22209

.250-20 .187 .238 20° 80° .310 .330 5 1 4 2.50 .0090 .0156
1000 WILSON BLVD.

.3125-18 .227 .291 20° 80° .380 .400 5 1 3 2.75 .0100 .0174
.375-16 .271 .354 20° 80° .452 .472 6 1 3 2.75 .0113 .0195
.4375-14 .318 .416 20° 80° .526 .551 6 1 4 1.75 .0129 .0223
.500-13 .349 .463 20° 80° .597 .622 6 1 4 1.75 .0139 .0240
.5625-12 .401 .521 20° 80° .656 .676 6 1 4 1.75 .0150 .0260
.625-11 .428 .572 20° 80° .727 .747 6 1 5 2.25 .0164 .0284
.750-10 .453 .635 60° 120° .840 .885 6 1 5 2.25 .0180 .0312
.875-9 .500 .734 60° 120° .991 1.026 6 1 6 3.33 .0200 .0347
1.000-8 .526 .781 60° 120° 1.135 1.170 6 1 6 3.33 .0226 .0391
1.125-7 .557 .843 60° 120° 1.260 1.315 6 1 6 3.33 .0258 .0446
1.250-7 .679 .937 60° 120° 1.366 1.416 6 1 6 3.33 .0258 .0446
1.375-6 .689 1.093 60° 120° 1.545 1.598 7 1 6 3.33 .0301 .0521
1.500-6 .811 1.187 60° 120° 1.676 1.727 7 1 6 3.33 .0301 .0521

TABLE III. Insert dimensions coarse thread

(Continued)
NOMINAL X Y Z
THREAD +.001 +.001 +.000
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST

SIZE -.000 -.000 -.001

THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

.086-56 - - -
.099-48 - - -
.112-40 - - -
.125-40 - - -
.138-32 .045 .020 .101
.164-32 .045 .020 .127
.190-24 .061 .020 .142
.216-24 .064 .025 .168
.250-20 .073 .028 .193
.3125-18 .082 .034 .250
.375-16 .093 .039 .302
.4375-14 .112 .056 .355
.500-13 .125 .076 .411
.5625-12 .142 .086 .468
.625-11 .156 .114 .521
.750-10 .186 .117 .625
.875-9 .186 .156 .750
REVISION DATE.

1.000-8 .250 .156 .844

1.125-7 - - -
1.250-7 - - -
1.375-6 - - -
1.500-6 - - -

REVISION

2
FORM 08-02

NASM21209
SHEET 6
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---

Copyright Aerospace Industries Association of America Inc.

CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

TABLE IV. Insert dimensions fine thread

NOMINAL A B GAGE D E F
THREAD MIN MIN MAX MIN MAX MIN MAX MIN MAX
SIZE
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

.099-56 .0027 .0163 .0193 .00893 .0112 .0116 .0126 .0156 .131 .146
.112-48 .0043 .0196 .0226 .01042 .01313 .01353 .0152 .0182 .147 .162
.138-40 .0068 .0241 .0271 .01250 .01584 .01624 .0189 .0219 .173 .193
.164-36 .0059 .0261 .0301 .01389 .01764 .01804 .0203 .0243 .204 .224
.190-32 .0076 .0295 .0338 .01563 .01985 .02030 .0233 .0273 .236 .256
.250-28 .0085 .0347 .0387 .01786 .02270 .02320 .0253 .0313 .306 .326
.3125-24 .0120 .0410 .0449 .02083 .02656 .02706 .0305 .0365 .380 .400
.375-24 .0120 .0410 .0449 .02083 .02656 .02706 .0305 .0365 .448 .468
ARLINGTON, VA 22209
1000 WILSON BLVD.

.4375-20 .0164 .0500 .0540 .02500 .03198 .03248 .0378 .0438 .524 .549
.500-20 .0164 .0500 .0540 .02500 .03198 .03248 .0378 .0438 .592 .617
.5625-18 .0176 .0560 .0600 .02778 .03558 .03608 .0416 .0486 .666 .691
.625-18 .0176 .0560 .0600 .02778 .03558 .03608 .0416 .0486 .733 .758
.750-16 .0215 .0636 .0677 .03125 .04009 .04059 .0477 .0547 .876 .901
.875-14 .0267 .0730 .0770 .03571 .04589 .04639 .0545 .0625 1.021 1.051
1.000-12 .0334 .0861 .0900 .04167 .05363 .05413 .0649 .0729 1.169 1.199
1.125-12 .0334 .0861 .0900 .04167 .05363 .05413 .0649 .0729 1.304 1.334
1.250-12 .0334 .0861 .0900 .04167 .05363 .05413 .0649 .0729 1.439 1.469
1.375-12 .0334 .0861 .0900 .04167 .05363 .05413 .0649 .0729 1.575 1.610
1.500-12 .0334 .0861 .0900 .04167 .05363 .05413 .0649 .0729 1.710 1.745

TABLE IV. Insert dimensions fine thread (Continued)

NOMINAL G H J K L P S R T
THREAD MIN MAX MIN MAX MIN MAX ±1/4 MIN MIN
SIZE COIL

--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---
.099-56 .072 .090 75° 150° .131 .146 4 1 - - .0032 .0056
.112-48 .060 .095 75° 150° .147 .162 4 1 4 2.33 .0038 .0065
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST

.138-40 .100 .130 25° 100° .173 .193 4 1 4 2.33 .0045 .0078
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

.164-36 .117 .147 20° 100° .204 .224 4 1 4 2.33 .0050 .0087
.190-32 .131 .182 15° 90° .236 .256 5 1 4 1.75 .0056 .0098
.250-28 .178 .244 15° 75° .306 .326 5 1 6 4.0 .0064 .0112
.3125-24 .209 .291 15° 75° .380 .400 6 2 9 5.25 .0075 .0130
.375-24 .240 .353 15° 75° .448 .468 6 2 10 5.25 .0075 .0130
.4375-20 .287 .416 15° 75° .524 .549 6 2 8 4.0 .0090 .0156
.500-20 .318 .479 15° 75° .592 .617 6 2 10 5.25 .0090 .0156
.5625-18 .354 .541 15° 75° .666 .691 6 2 10 5.25 .0100 .0174
.625-18 .386 .588 15° 75° .733 .758 6 2 10 5.25 .0100 .0174
.750-16 .464 .557 15° 75° .876 .901 7 2 12 6.25 .0113 .0195
.875-14 .495 .604 15° 75° 1.021 1.051 8 2 12 6.25 .0129 .0223
1.000-12 .526 .728 15° 75° 1.169 1.199 8 2 14 7.5 .0150 .0260
1.125-12 .557 .819 10° 70° 1.304 1.334 8 2 14 7.5 .0150 .0260
1.250-12 .679 .941 10° 70° 1.344 1.374 8 2 14 7.5 .0150 .0260
1.375-12 .689 1.001 10° 70° 1.469 1.504 10 2 14 7.5 .0150 .0260
1.500-12 .811 1.123 10° 70° 1.594 1.629 11 2 14 7.5 .0150 .0260
REVISION DATE.

REVISION

2
FORM 08-02

NASM21209
SHEET 7
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
Copyright Aerospace Industries Association of America Inc.
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2009 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

TABLE IV. Insert dimensions fine thread

(Continued)
NOMINAL X Y Z
THREAD +.001 +.001 +.000
SIZE -.000 -.000 -.001
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA , INC

.099-56 - - -
.112-48 - - -
.138-40 - - -
.164-36 - - -
.190-32 .052 .020 .153
.250-28 .060 .020 .208
.3125-24 .070 .024 .265
.375-24 .070 .024 .328
.4375-20 .088 .046 .380
ARLINGTON, VA 22209
1000 WILSON BLVD.

.500-20 .090 .046 .422

.5625-18 .100 .066 .500
.625-18 .100 .089 .563
.750-16 .109 .087 .679
.875-14 .125 .135 .794
1.000-12 - - -
1.125-12 - - -
1.250-12 - - -
1.375-12 - - -
1.500-12 - - -

NOMINAL LENGTH: NOMINAL LENGTH EQUALS MINIMUM THROUGH HOLE LENGTH WITHOUT COUNTERSINK AND WITH INSERT
LOCATED ¼ TO ½ THREAD PITCH BELOW TOP SURFACE.
FREE COILS: THE NUMBER OF FREE COILS OF THE INSERT ARE COUNTED 90° FROM TANG FOR ALL SIZES.
d MATERIAL:
THREAD:
STEEL, CORROSION RESISTANT. SEE PROCUREMENT SPECIFICATION.
INSERT, WHEN ASSEMBLED IN BASIC TAPPED HOLE AS SPECIFIED ON STANDARD NASM33537, SHALL PRODUCE
d A FINISHED THREAD MEETING THE REQUIREMENTS OF FED-STD-H28 AND SHALL ACCEPT EXTERNAL THREADED
PARTS WHICH ARE THREADED TO MIL-S-7742 OR AS8879.
SURFACE ROUGHNESS: ASME B46.1.
DIMENSIONS IN INCHES, APPLY BEFORE PLATING. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS ±.010,
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST

ANGULAR DIMENSIONS ±5°.

THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

COLOR IDENTIFICATION: (a) BARE INSERTS - DYED RED

(b) DRY FILM LUBRICATED - DARK GREY
(c) CADMIUM PLATED - OLIVE DRAB
d LUBRICANT: DRY FILM LUBRICANT SHALL BE IN ACCORDANCE WITH AS5272.
PLATING: CADMIUM PLATING SHALL BE IN ACCORDANCE WITH AMS-QQ-P-416, TYPE II, EXCEPT THE THICKNESS SHALL BE A
d MINIMUM OF 0.0001.
ADD THE LETTER “L” AFTER THE PART NUMBER TO DESIGNATE A DRY FILM LUBRICANT COATED INSERT.
ADD THE LETTER “P” AFTER THE PART NUMBER TO DESIGNATE A CADMIUM PLATED INSERT.
THE MS PART NUMBER CONSISTS OF THE BASIC MS NUMBER PLUS THE DASH NUMBER.

EXAMPLE OF PART NUMBER: MS21209C0415 = A SCREW LOCKING HELICAL COIL INSERT (MS21209), COARSE THREAD (C), .112-
40 THREAD SIZE (04), 1.5 DIA NOMINAL LENGTH (15).
MS21209F4-20L = A SCREW LOCKING HELICAL COIL INSERT (MS21209), FINE THREAD (F), .250-28
THREAD SIZE (4), 2.0 DIA NOMINAL LENGTH (-20), WITH A DRY FILM LUBRICANT (L).
MS21209F1225P = A SCREW LOCKING HELICAL COIL INSERT (MS21209), FINE THREAD (F), .750-16
THREAD SIZE (12), 2.5 DIA NOMINAL LENGTH (25), WITH CADMIUM PLATING (P).

NOTE: (1) UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THE APPLICABLE
DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED. d
REVISION DATE.

REVISION

2
FORM 08-02

NASM21209
SHEET 8
--`,`,`,`,``````,,,,,,``,``,``,,-`-`,,`,,`,`,,`---
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
Copyright Aerospace Industries Association of America Inc.
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
Provided by IHS under license with AIA/NAS Licensee=B/E Aerospace Inc Loc 4/5967961004
ITEMS without
No reproduction or networking permitted FOR ANY PARTICULAR
license from IHS APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO
Not for Resale, OF PATENT
11/25/2009 OR TRADEMARKS RIGHTS.
08:04:21 MST