Maryland Metrics Keenserts

Alcoa Fastening Systems KEENSERT products are available from MARYLAND METRICS
Inserts and Studs
Alcoa Fastening Systems has the broadest selection of threaded Inserts and Studs available
MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
email: sales@mdmetric.com web: http://mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Keenserts Key-type Inserts and Studs
Keenserts inserts and studs are

designed to provide high resistance
to torque-out and pull-out loads.
The keys that are pre-assembled onto
each fastener are driven down
through the threads of the parent
material, mechanically locking it into
place. These keys positively prevent
rotation due to torsion and vibration.
Keenserts inserts are available with
internal threads that are either freerunning, or come with locking devices
such as deformed threads, Vespel
insert, or beam lock. Inserts are also
available with the unique patented
Spiralock thread form, which allows
for a free running bolt installation.
Once the mating bolt preload is
applied, Spiralock inserts will resist
the most severe transverse vibration.
Keenserts studs provide a nut-end
thread designed to transfer high axial
loads into weak base materials. The
stud or keyed end is installed into the
parent material, thus eliminating the
need for removing or replacing a bolt.
Keenserts inserts and studs are easy
to install using standard drills, taps and
gages. Alcoa Fastening Systems
offers a wide selection
of manual and power installation and
removal tools.
Both inserts and studs come in a
variety of materials including 303,
304, A286, and 17-4 PH Corrosion
Resistant Steels, along with Inconel
718 Nickel-Chromium Alloy, 6Al-4V
Titanium, 4140 Alloy Steel, and Carbon
Steel. Locking key materials consist of
302, A286, and 420 Corrosion Resistant
Steels, as well as Inconel X-750 and

Inconel 718 Nickel-Chromium Alloys.
Variations of the standard insert
include miniature, lightweight, heavy
duty, extra heavy duty, floating, blind,
solid, and hydraulic. Variations of the
stud design include shear load, lightweight and heavy duty. Keenserts
inserts and studs are also available
with self-broaching keys for ease of
installation into a hard parent material.
Both unified and metric products are

available. Keenserts inserts and studs
are covered by AS, MS, and NAS
standards.
Typical Keenserts applications include
fixed and rotary-wing aircraft, engines,
gearboxes, tracked vehicles, accessory
housings, electronic packaging, and
thread hole repair.
ALCOA Fastening Systems products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA
Features and Benefits of Tridair KEENSERTS Inserts

FEATURE:
BENEFIT:
Designed and manufactured by a well-known and respected manufacturer of thread

repair parts. Supplier to OEMs, industrial maintenance, military, and all phases
of the aftermarket.
No need to doubt its performance . . . regardless of application.
FEATURE:
BENEFIT:
Solid bushing with locking kees.

Positive mechanical lock against rotation.
FEATURE:
May be used in virtually any material . . . aluminum, magnesium, cast iron, cold rolled
steel and plastic.
No restrictions on parent material.
BENEFIT:
FEATURE:
BENEFIT:
High strength and reliability.

Provides maximum pullout strength- -breaks grade 8 bolt.
FEATURE:
BENEFIT:
No special skill required to use KEENSERTS Inserts.

Installation procedures can be learned in minutes.
FEATURE:
BENEFIT:
Hole preparation with standard drill and tap.

No special, costly, single-purpose drills or taps required.
FEATURE:
BENEFIT:
Inserted with fingers.

No special prewinder tools required.
FEATURE:
BENEFIT:
Impossible to cross-thread during installation.

Perfect installation every time.
FEATURE:
BENEFIT:
Can be removed very simply when necessary.

Permanently installed unless removal is required.
FEATURE:
BENEFIT:
Prepared hole not affected when insert is removed.

New insert can be installed in same hole.
FEATURE:
BENEFIT:
No tang to break off after installation.

No need to worry about metal piece falling into prepared hole.
FEATURE:
BENEFIT:
Available in inch and metric sizes.

One line for all types of threads.
FEATURE:
FEATURE:
BENEFIT:
Available in Thinwall (10-24 through 1/2-20 I.D.) and Heavy Duty (8-32 through 1 3/4-12 I.D.).
Special sizes quoted on request.
Also available in stainless.
One line for all applications.
FEATURE:
BENEFIT:
Available for spark plug applications.

Designed for both tapered and straight seats.
Once you try Tridair KEENSERTS Inserts, youll never go back to any other insert!
Tridair Products i
Maryland Metrics ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web: http://mdmetric.com
KEENSERTS Inserts Installation Guidelines

1.
Edge Distance
Boss Diameter: 1 1/2 x O.D. of insert.
Edge distance to a flat side: Can be as little as 1/32 over 1/2 O.D. of the insert. Tap
marks may show on flat side and the insert should be positioned with kees 45o to 90o
(2 kees).
2.
Broaching
General material harder than RC 30 may require that the tapped holes be broached
for the kees. Aluminum, anodized after tapping, also may require broaching. Broach
blades may not stand up for more than 3 or 4 holes when broaching inconel and
similar alloys. It is possible to drive kees of the KNH and KNHXH series in harder
material than the KN series because of wall collapse. Tools with threads to support
to the inside of the insert are available if wall collapse is encountered.
3.
Thickness of Parent Material

Miniature KEENSERTS Inserts - .015 (minimum) thicker than the length of the insert if it is
undesirable to have it protrude through underside of panel. T (dimension
from catalog) + .015 if protrusion through underside is permissible.
KN, KNH and KNHXH KEENSERTS Inserts - General minimum thickness should be equal
to bolt diameter (Tridair Engineering should be consulted for these applications). Insert
will protrude through bottom surface unless length is coded.
4.
Internal Thread Lock

All our internal thread locks conform to MIL-N-25027.
MIL-N-25027 does not call for seating the bolt.
We test with minimum P.D. 3A bolts. 2A bolts, being smaller, will provide very little or no
torque and should not be used. Bolts should have 4 turns after encountering the lock.
Less turns may not provide the required torque and more turns will wear out the lock faster.
For a metric thread a 4H Class bolt is used to test locking feature.
Seating the bolt will affect the locking torque and the number of locking cycles. How it will
be affected depends on the material of the bolt and the insert, the finish on bolt and insert,
lubrication on the threads and under the head of the bolt, and the seating torque.
5.
Standard Minor Diameter Versus Modified Minor

All other things being equal standard minor diameters will provide greater shear engagement
areas. This would be desirable where a bolt goes directly into a tapped tole. In the case of
inserts where the O.D. of the insert is so much larger than the diameter of the bolt being
used, using a larger tap drill, as we do, does not lower the pullout values to any great extent.
Tridair Products ii
KEENSERTS INSERTS AND STUDS

KEENSERTS Inserts and Studs provide strong, permanent,
metal threads in virtually any material - ferrous, non-ferrous or non-metallic.
Tridair pioneered the design of this type of insert and is
able to offer the widest available choice of standard sizes,
lengths, materials and types. Because of our years of application experience, we are geared to provide solutions to all
types of special insert problems. If you dont see a design in
this catalog that will suit your application, consult our Sales
Engineer for other designs to meet your specific needs.

Securely
locked
against
rotation.
KEES are driven down into the tapped threads of the parent material
during installation to securely lock the insert against rotation.
Featuring an exclusive external thread design, KEENSERTS provide
maximum pull-out strength with a minimum outside diameter.
Installed with standard taps and drills.
Available from stock in many sizes and types.
PULL-OUT STRENGTH
(For Reference Purposes Only)
To compute the Pull-Out Strength in any parent material,

use the following formula:
Minimum Shear
Calculated
X
= Engagement
Pull-Out Strength
Area (IN2)
Minimum Ultimate
Shear Strength of
the Parent Material
(PSI)
Internal thread lock feature available.

Inserts with this feature are designed to securely
lock a bolt when it is entered into the insert only
a few turns. The locking torque values are
consistent and well within the range established
by MIL-I-45914A.
Even after repeated installations and removals
of the bolt, the lock maintains sufficient locking
torque to prevent the bolt from vibrating out.
NOTES:
Inserts: MIL-I-45914, as amended 25 Nov 1970 has been
superseded by MIL-I-45914A dated 25 Apr 1991. Any reference to
MIL-N-25027 is to be disregarded. The tests and methods are all
covered in MIL-I-45914A.
Studs: MIL-S-45915 dated 25 Nov 1970 has been superseded by
MIL-S-45915A dated 21 Aug 1991.
ABOUT SHEAR ENGAGEMENT AREA

Catalog values for shear engagement areas are based on shear
failure in the parent material when the parent material is significantly
weaker than the insert or stud material. Such failure occurs in the
parent material at or near the major diameter of the insert or stud
end external thread. For parent materials of hardness similar to that
of the insert or stud, failure occurs by combined shear of both
materials simultaneously and will occur along a surface approaching
the pitch line. The calculated shear engagement area should be
reduced accordingly. For sufficiently hard parent materials, failure
may occur by thread shear at the internal thread of the insert or by
stud nut end thread failure.
Tridair Products 1
SECTION
SELECTOR GUIDE/INDEX
PAGE
NO.
1
2
3
5-10
11
12
INSTALLATION
CROSS REFERENCE INDEX - Part No./MS and NAS Equivalents. Decimal Equivalents.
GENERAL PURPOSE INSERTS
Miniature Inserts: For use in electronic and aerospace
applications where size and weight are critical.
13-15
Lightweight, Heavy Duty and Extra Heavy Duty Inserts:

A wide choice of sizes, lengths and materials suit virtually
any requirement.
16
Carbon Steel Inserts: These inserts offer the designer a

commercial version of our NAS/MS KEENSERTS at a more
economical price.
17
SPECIAL PURPOSE INSERTS
18
Floating Inserts: Compensate for misalignment automatically. Ideal

for use on curved surfaces or for use with flathead screws.
19
Blind End Inserts: Where it is important to keep a screw isolated

from certain assemblies.
20,21
Hydraulic Inserts: For complete port protection in hydraulic or fuel

systems.
22
High-Strength Aluminum Inserts: For miniaturized space and

electronic systems.
22
Solid Inserts: For relocating holes that have been drilled or

tapped in the wrong location, to fill holes, orsalvage expensive
castings.
23
Cast-In Inserts: For casting into place during die casting and
plastic molding operations.
Tridair Products 2
SECTION
PAGE
NO.
25
METRIC INSERTS
26
Miniature Series Inserts
26
Lightweight Series Inserts
27
Heavy Duty Series Inserts
28
Carbon Steel Inserts
Miniature
Lightweight
Heavy Duty
These metric inserts are used in the same way and have the
same design features as General Purpose Inserts. They
should be specified in applications wherever design dimensions are required in millimeters insteead of inches.
29
GENERAL PURPOSE STUDS
30
Shear Load Series Studs/ AND Standards
31
Lightweight Series Studs
32
Heavy Duty Series Studs/ AND Standards

Offered in high performance materials to meet the requirements
of aerospace and military specifications. Particularly suited for
high temperature, cryogenic or high loading applications.
33
Shear Load
Heavy Duty
METRIC STUDS
34
Shear Load Series Studs
34
Lightweight Series Studs
35
Heavy Duty Series Studs

These metric studs are used in the same way and have the
same design features as General Purpose Studs. They should
be specified in applications wherever design dimensions are
required in millimeters instead of inches.
Lightweight
Lightweight
Metric Studs
SELF-BROACHING KEENSERTS
36, 37
Self-Broaching KEENSERTS
38
TR28000 ( ) Series Studs
39
TR29000 ( ) Series Inserts
BULK INSERTS AND KITS

Test results
Tridair Products 3
SECTION
INSTALLATION
1
One-piece KEENSERTS Inserts are supplied with
KEES pre-assembled into dove-tailed slots at the
fatory, to eliminate the problems of selecting, stocking
and assembling separate parts. The prepositioned
KEES automatically set the insert at the proper depth
below the surface of the parent material.
Unlike conventional inserts, there is no need to

maintain critical depth tolerances . . . no chance of
inadequate locking or deformation of internal
threads due to miscalculations of depth. For critical
edge distance applications, please consult our
home office or our local Sales Engineer.
n DRILL with a STANDARD drill.

n COUNTERSINK with a STANDARD countersink (82o to 100o).
n TAP with a STANDARD Unified Thread Series tap.
Screw in insert with fingers or installation tool. Insert is

designed to stop at the correct depth below the surface of
the casting.
Using the installation tool, drive in the KEES. The tool may be
used with a hammer or held in an arbor press. The correct
insert tool is tabulated with each type of insert in this
catalogue.
Screw in
the insert.
Tap down
the KEES.
n For Miniature Series inserts, screw the insert onto the

threaded mandrel and turn the insert into the tapped hole.
n When the tool handle is depressed, a special springloaded trip mecanism within the tool will drive the KEES into
the parent material.
n The replacement of inserts is accomplished without
reworking the parent material, and the same size insert is
used in the original hole.
Broaching
Tool
Removal of KEENSERTS Inserts

It is unlikely that KEENSERTS inserts will ever have to be removed since their
threads are stronger than original threads. If removal is necessary, however, follow
these simple steps.
1. Use STANDARD
DRILL to remove insert
material between
Kees.
2. Deflect Kees
inward and break off.
3. Remove insert with 4. An identical insert can

E-Z OUT type tool.
now be installed in the
original hole. No re-work
of the hole will be
necessary.
for very hard

materials.
When the parent material is
very hard or tough, a
special broach for the KEEs
is available.
Broaching Tools are coded in the following manner:

B
INDICATES
BROACHING
TOOL
332
-4
RECOMMENDED
INSTALLATION
TAP-DRILL DIAMETER
NUMBER OF
LOCKING KEES
IN THE INSERT
NOTE: THE SMALLEST TAP DRILL DIAMETER FOR WHICH

BROACHING TOOLS CAN BE MADE IS .213.
Tridair Products 4
Cross Reference MS 51830 Series and NAS 1394 Series.
Fine Threads
Coarse Threads
MATER IAL
303 C R E S
MATER IAL
303 C R E S
4140/160 K SI
A286/140 K SI
KNC A(L) 0256J
KNC A(L) 0256JMXSY
KNC A(L) 0256JT
---
---
---
MS 51830-101(L)
MS 51830A101(L)
MS 51830C A101(L)
---
---
---
---
---
---
---
4140/160 K SI
---
A286/140 K SI
---
KNC A(L) 0440J
KNC A(L) 0440JMXSY
KNC A(L) 0440JT
---
---
---
MS 51830-102(L)
MS 51830A102(L)
MS 51830C A102(L)
---
---
---
---
---
---
---
---
---
KNC (L) 0632J
KNC (L) 0632JMXSY
KNC (L) 0632JT
---
---
---
MS 51830-103(L)
MS 51830A103(L)
MS 51830C A103(L)
---
---
---
---
---
---
---
---
---
KNC A(L) 0832J
KNC A(L) 0832JMXSY
KNC A(L) 0832JT
---
---
---
MS 51830-104 (L)
MS 51830A104 (L)
MS 51830C A104 (L)
---
---
---
---
---
---
---
---
---
---
---
---
---
---
--KN(L) 0832J
---
--KN(L) 0832JMXSY
---
--KN(L) 0832JT
---
NAS 1394C 08(L)
NAS 1394-08(L)
NAS 1394C A08(L)
KN(L) 1024J
KN(L) 1024JMXSY
KN(L) 1024JT
MS 51830-105(L)
MS 51830A105(L)
MS 51830C A105(L)
---
---
---
KN(L) 1032J
KN(L) 1032JMX**
--KN(L) 1032JT
MS 51830-201(L)
MS 51830A201(L)
MS 51830C A201(L)
NAS 1394C 3(L)
NAS 1394-3(L)
NAS 1394C A3(L)
KN(L) 420J
KN(L) 420JMXSY
KN(L) 420JT
KN(L) 428J
KN(L) 428JMX**
KN(L) 428JT
MS 51830-106(L)
MS 51830A106(L)
MS 51830C A106(L)
MS 51830-202(L)
MS 51830A202(L)
MS 51830C A202(L))
---
---
---
KN(L) 518J
KN(L) 518JMXSY
KN(L) 518JT
MS 51830-107(L)
MS 51830A107(L)
MS 51830C A107(L)
---
---
---
NAS 1394C 4(L)
NAS 1394-4(L)
NAS 1394C A4(L)
KN(L) 524J
KN(L) 524JMX**
KN(L) 524JT
MS 51830-203(L)
MS 51830A203(L)
MS 51830C A203(L)
NAS 1394C 5(L)
NAS 1394-5(L)
NAS 1394C A5(L)
KN(L) 616J
KN(L) 616JMXSY
KN(L) 616JT
KN(L) 624J
KN(L) 624JMX**
KN(L) 624JT
MS 51830-108(L)
MS 51830A108(L)
MS 51830C A108(L)
MS 51830-204(L)
MS 51830A204(L)
MS 51830C A204(L)
---
---
---
KN(L) 714J
KN(L) 714JMXSY
KN(L) 714JT
MS 51830-109(L)
MS 51830A109(L)
MS 51830C A109(L)
---
---
---
NAS 1394C 6(L)
NAS 1394-6(L)
NAS 1394C A6(L)
KN(L) 720J
KN(L) 720JMX**
KN(L) 720JT
MS 51830-205(L)
MS 51830A205(L)
MS 51830C A205(L)
NAS 1394C 7(L)
NAS 1394-7(L)
NAS 1394C A7(L)
KN(L) 813J
KN(L) 813JMXSY
KN(L) 813JT
KN(L) 820J
KN(L) 820JMX**
KN(L) 820JT
MS 51830-110(L)
MS 51830A110(L)
MS 51830C A110(L)
MS 51830-206(L)
MS 51830A206(L)
MS 51830C A206(L)
NAS 1394C 8(L)
NAS 1394-8(L)
NAS 1394C A8(L)
---
---
SECTION
CROSS REFERENCE
Miniature Inserts
INDEX
Lightweight Inserts
---
NOTES: 1. When Dry Film is not required on locking parts, add the suffix, N on NAS Part No., or
NE on KN Part No.
2. The suffix, SPNAS added to KN Part No. or S added to NAS Part No. indicates Silver Plate
per AMS 2410.
3. Use (L) in Part No. ONLY if Internal Thread Locking feature is required.
4. J code as in KNCA0256J designates threads manufactured to MIL-S-8879.
5. Replace ** with one of the following suffixes:
SY for MS parts
SZ for NAS parts
Tridair Products 5
SECTION
Heavy Duty Inserts

Cross Reference MS 51831 Series and NAS 1395 Series.
Coarse Threads
MATERIAL
303 C R E S
KNH(L) 0440J
---
4140/160 KSI
KNH(L) 0440JMXSY
---
Fine Threads
MATERIAL
A286/140 KSI
303 C R E S
4140/160 KSI
A286/140 KSI
---
---
---
---
---
---
KNH(L) 0440JT
---
NAS 1395C04(L)
NAS 1395-04(L)
NAS 1395CA04(L)
---
---
---
KNH(L) 0632J
KNH(L) 0632JMXSY
KNH(L) 0632JT
---
---
---
---
---
---
---
---
---
NAS 1395C06(L)
NAS 1395-06(L)
NAS 1395CA06(L)
---
---
---
KNH(L) 0832J
KNH(L) 0832JMXSY
KNH(L) 0832JT
---
---
---
---
---
---
---
---
---
---
---
NAS 1395C08(L)
NAS 1395-08(L)
NAS 1395CA08(L)
KNH(L) 1024J
KNH(L) 1024JMXSY
KNH(L) 1024JT
MS 51831-101(L)
MS 51831A101(L)
MS 51831CA101(L)
---
---
---
KNH(L) 1032J
KNH(L) 1032JMX**
--KNH(L) 1032JT
MS 51831-201(L)
MS 51831A201(L)
MS 51831CA201(L)
NAS 1395C3(L)
NAS 1395-3(L)
NAS 1395CA3(L)
KNH(L) 420J
KNH(L) 420JMXSY
KNH(L) 420JT
KNH(L) 428J
KNH(L) 428JMX**
KNH(L) 428JT
MS 51831-102(L)
MS 51831A102(L)
MS 51831CA102(L)
MS 51831-202(L)
MS 51831A202(L)
MS 51831CA202(L)
---
---
---
KNH(L) 518J
KNH(L) 518JMXSY
KNH(L) 518JT
MS 51831-103(L)
MS 51831A103(L)
MS 51831CA103(L)
---
---
---
NAS 1395C4(L)
NAS 1395-4(L)
NAS 1395CA4(L)
KNH(L) 524J
KNH(L) 524JMX**
KNH(L) 524JT
MS 51831-203(L)
MS 51831A203(L)
MS 51831CA203(L)
NAS 1395C5(L)
NAS 1395-5(L)
NAS 1395CA5(L)
KNH(L) 616J
KNH(L) 616JMXSY
KNH(L) 616JT
KNH(L) 624J
KNH(L) 624JMX**
KNH(L) 624JT
MS 51831-104(L)
MS 51831A104(L)
MS 51831CA104(L)
MS 51831-204(L)
MS 51831A204(L)
MS 51831CA204(L)
---
---
---
KNH(L) 714J
KNH(L) 714JMXSY
KNH(L) 714JT
MS 51831-105(L)
MS 51831A105(L)
MS 51831CA105(L)
---
---
---
NAS 1395C6(L)
NAS 1395-6(L)
NAS 1395CA6(L)
KNH(L) 720J
KNH(L) 720JMX**
KNH(L) 720JT
MS 51831-205(L)
MS 51831A205(L)
MS 51831CA205(L)
NAS 1395C7(L)
NAS 1395-7(L)
NAS 1395CA7(L)
KNH(L) 813J
KNH(L) 813JMXSY
KNH(L) 813JT
KNH(L) 820J
KNH(L) 820JMX**
KNH(L) 820JT
MS 51831-106(L)
MS 51831A106(L)
MS 51831CA106(L)
MS 51831-206(L)
MS 51831A206(L)
MS 51831CA206(L)
---
---
---
KNH(L) 912J
KNH(L) 912JMXSY
KNH(L) 912JT
MS 51831-107(L)
MS 51831A107(L)
MS 51831CA107(L)
---
---
---
NAS 1395C8(L)
NAS 1395-8(L)
NAS 1395CA8(L)
KNH(L) 918J
KNH(L) 918JMX**
KNH(L) 918JT
MS 51831-207(L)
MS 51831A207(L)
MS 51831CA207(L)
NAS 1395C9(L)
NAS 1395-9(L)
NAS 1395CA9(L)
KNH(L) 1011J
KNH(L) 1011JMXSY
KNH(L) 1011JT
KNH(L) 1018J
KNH(L) 1018JMX**
KNH(L) 1018JT
MS 51831-108(L)
MS 51831A108(L)
MS 51831CA108(L)
MS 51831-208(L)
MS 51831A208(L)
MS 51831CA208(L)
NAS 1395C10(L)
NAS 1395-10(L)
NAS 1395CA10(L)
KNH(L) 1210J
---
KNH(L) 1210JMXSY
KNH(L) 1210JT
KNH(L) 1216J
KNH(L) 1216JMXSY
KNH(L) 1216JT
MS 51831-109(L)
MS 51831A109(L)
MS 51831CA109(L)
MS 51831-209(L)
MS 51831A209(L)
MS 51831CA209(L)
---
---
---
---
---
---
---
---
KNH(L) 1409J
KNH(L) 1409JMXSY
KNH(L)1409JT
KNH(L) 1414J
KNH(L) 1414JMXSY
KNH(L)1414JT
MS 51831-110(L)
MS 51831A110(L)
MS 51831CA110(L)
MS 51831-210(L)
MS 51831A210(L)
MS 51831CA210(L)
---
---
---
---
---
---
KNH(L) 1608J
KNH(L) 1608JMXSY
KNH(L)1608JT
KNH(L) 1612J
KNH(L) 1612JMXSY
KNH(L)1612JT
MS 51831-111(L)
MS 51831A111(L)
MS 51831CA111(L)
MS 51831-211(L)
MS 51831A211(L)
MS 51831CA211(L)
---
---
---
Use (L) in Part No. ONLY if Internal Thread Locking feature is required.
---
---
---
NOTE: Replace ** with one of the following suffixes:

SY for MS parts
SZ for NAS parts
Tridair Products 6
SECTION
Extra Heavy Duty Inserts

Cross Reference MS 51832 Series.
2
Coarse Threads
Fine Threads
MATERIAL
303 C R E S
4140/160 KSI
MATERIAL
A286/140 KSI
303 C R E S
4140/160 KSI
A286/140 KSI
KNHXH(L) 1024J
KNHXH(L) 1024JMXSY KNHXH(L) 1024JT
KNHXH(L) 1032J
MS 51832-101(L)
MS 51832A101(L)
MS 51832-201(L)
MS 51832A201(L)
---
---
MS 51832CA101(L)
---
---
---
MS 51832CA201(L)
---
KNHXH(L) 420J
KNHXH(L) 420JMXSY
KNHXH(L) 420JT
KNHXH(L) 428J
KNHXH(L) 428JMXSY
KNHXH(L) 428JT
MS 51832-102(L)
MS 51832A102(L)
MS 51832CA102(L)
MS 51832-202(L)
MS 51832A202(L)
MS 51832CA202(L)
---
---
---
---
---
---
KNHXH(L) 518J
KNHXH(L) 518JMXSY
KNHXH(L) 518JT
KNHXH(L) 524J
KNHXH(L) 524JMXSY
KNHXH(L) 524JT
MS 51832-103(L)
MS 51832A103(L)
MS 51832CA103(L)
MS 51832-203(L)
MS 51832A203(L)
MS 51832CA203(L)
---
---
---
---
---
---
KNHXH(L) 616J
KNHXH(L) 616JMXSY
KNHXH(L) 616JT
KNHXH(L) 624J
KNHXH(L) 624JMXSY
KNHXH(L) 624JT
MS 51832-104(L)
MS 51832A104(L)
MS 51832CA104(L)
MS 51832-204(L)
MS 51832A204(L)
MS 51832CA204(L)
---
---
---
---
---
---
KNHXH(L) 714J
KNHXH(L) 714JMXSY
KNHXH(L) 714JT
KNHXH(L) 720J
KNHXH(L) 720JMXSY
KNHXH(L) 720JT
MS 51832-105(L)
MS 51832A105(L)
MS 51832CA105(L)
MS 51832-205(L)
MS 51832A205(L)
MS 51832CA205(L)
---
---
---
---
---
---
KNHXH(L) 813J
KNHXH(L) 813JMXSY
KNHXH(L) 813JT
KNHXH(L) 820J
KNHXH(L) 820JMXSY
KNHXH(L) 820JT
MS 51832-106(L)
MS 51832A106(L)
MS 51832CA106(L)
MS 51832-206(L)
MS 51832A206(L)
MS 51832CA206(L)
---
---
---
---
---
---
KNHXH(L) 912J
KNHXH(L) 912JMXSY
KNHXH(L) 912JT
KNHXH(L) 918J
KNHXH(L) 918JMXSY
KNHXH(L) 918JT
MS 51832-107(L)
MS 51832A107(L)
MS 51832CA107(L)
MS 51832-207(L)
MS 51832A207(L)
MS 51832CA207(L)
---
---
---
---
---
---
KNHXH(L) 1011J
KNHXH(L) 1018J
MS 51832-108(L)
MS 51832A108(L)
MS 51832-208(L)
MS 51832A208(L)
---
---
MS 51832CA108(L)
---
---
---
MS 51832CA208(L)
---
KNHXH(L) 1210J
KNHXH(L) 1216J
MS 51832-109(L)
MS 51832A109(L)
MS 51832-209(L)
MS 51832A209(L)
---
---
MS 51832CA109(L)
---
---
---
MS 51832CA209(L)
---
KNHXH(L) 1409J
KNHXH(L) 1409JMXSY KNHXH(L)1409JT
KNHXH(L) 1414J
MS 51832-110(L)
MS 51832A110(L)
MS 51832-210(L)
MS 51832A210(L)
---
---
MS 51832CA110(L)
---
---
---
MS 51832CA210(L)
---
KNHXH(L) 1608J
KNHXH(L) 1612J
MS 51832-111(L)
MS 51832A111(L)
MS 51832-211(L)
MS 51832A211(L)
---
---
MS 51832CA111(L)
---
---
---
MS 51832CA211(L)
---
Tridair Products 7
SECTION
Lightweight Studs
2
Coarse Threads
Fine Threads
MATERIAL
303 C R E S
4140/160 KSI
MATERIAL
A286/140 KSI
303 C R E S
4140/160 KSI
A286/140 KSI
KNNS 1024JS-(NL)
KNNS 1024JMXSY-(NL) KNNS 1024JT-(NL)
KNNS 1032JS-(NL)
KNNS 1032JMXSY-(NL) KNNS 1032JT-(NL)
MS 51833 C101-(NL)
MS 51833-101-(NL)
MS 51833 C201-(NL)
MS 51833-201-(NL)
---
---
MS 51833 A101-(NL)
---
---
---
MS 51833 A201-(NL)
---
KNNS 420JS-(NL)
KNNS 420JMXSY-(NL)
KNNS 420JT-(NL)
KNNS 428JS-(NL)
KNNS 428JMXSY-(NL)
KNNS 428JT-(NL)
MS 51833 C102-(NL)
MS 51833-102-(NL)
MS 51833 A102-(NL)
MS 51833 C202-(NL)
MS 51833-202-(NL)
MS 51833 A202-(NL)
---
---
---
---
---
---
KNNS 518JS-(NL)
KNNS 518JMXSY-(NL)
KNNS 518JT-(NL)
KNNS 524JS-(NL)
KNNS 524JMXSY-(NL)
KNNS 524JT-(NL)
MS 51833 C103-(NL)
MS 51833-103-(NL)
MS 51833 A103-(NL)
MS 51833 C203-(NL)
MS 51833-203-(NL)
MS 51833 A203-(NL)
---
---
---
---
---
---
KNNS 616JS-(NL)
KNNS 616JMXSY-(NL)
KNNS 616JT-(NL)
KNNS 624JS-(NL)
KNNS 624JMXSY-(NL)
KNNS 624JT-(NL)
MS 51833 C104-(NL)
MS 51833-104-(NL)
MS 51833 A104-(NL)
MS 51833 C204-(NL)
MS 51833-204-(NL)
MS 51833 A204-(NL)
---
---
---
---
---
---
KNNS 714JS-(NL)
KNNS 714JMXSY-(NL)
KNNS 714JT-(NL)
KNNS 720JS-(NL)
KNNS 720JMXSY-(NL)
KNNS 720JT-(NL)
MS 51833 C105-(NL)
MS 51833-105-(NL)
MS 51833 A105-(NL)
MS 51833 C205-(NL)
MS 51833-205-(NL)
MS 51833 A205-(NL)
---
---
---
---
---
---
KNNS 813JS-(NL)
KNNS 813JMXSY-(NL)
KNNS 813JT-(NL)
KNNS 820JS-(NL)
KNNS 820JMXSY-(NL)
KNNS 820JT-(NL)
MS 51833 C106-(NL)
MS 51833-106-(NL)
MS 51833 A106-(NL)
MS 51833 C206-(NL)
MS 51833-206-(NL)
MS 51833 A206-(NL)
---
---
---
---
---
---
NOTE:
Replace (NL) in Part No. with Nut End Length in 1/16 increments.
Ex.: -22 = 1 3/8
NOTE:
When referring to MS Part Nos. use dash (-) in Part No. in lieu of D if drilled hole is not required. Use D in Part
No. in lieu of dash (-) only if drilled hole is required.
Ex.: MS 51834 C103 D24
NOTE:
MIL-S-45915 dated 25 Nov 1970 has been superseded by MIL-S-45915A dated 21 Aug 1991.
Notes & sketches
Tridair Products 8
SECTION
Heavy Duty Studs

2
Coarse Threads
Fine Threads
MATERIAL
MATERIAL
303 C R E S
4140/160 KSI
303 C R E S
A286/140 KSI
4140/160 KSI
A286/140 KSI
KHNS 0832JS-(NL)
KNHS 0832JMXSY-(NL) KNHS 0832JT-(NL)
KNHS 0836JS-(NL)
MS 51834 C101-(NL)
MS 51834-101-(NL)
MS 51834 C201-(NL)
MS 51834-201-(NL)
---
---
MS 51834 A101-(NL)
---
---
---
MS 51834 A201-(NL)
---
KNHS 1024JS-(NL)
KNHS 1032JS-(NL)
MS 51834 C102-(NL)
MS 51834-102-(NL)
MS 51834 C202-(NL)
MS 51834-202-(NL)
---
---
MS 51834 A102-(NL)
---
---
---
MS 51834 A202-(NL)
---
KNHS 420JS-(NL)
KNHS 420JMXSY-(NL)
KNHS 420JT-(NL)
KNHS 428JS-(NL)
KNHS 428JMXSY-(NL)
KNHS 428JT-(NL)
MS 51834 C103-(NL)
MS 51834-103-(NL)
MS 51834 A103-(NL)
MS 51834 C203-(NL)
MS 51834-203-(NL)
MS 51834 A203-(NL)
---
---
---
---
---
---
KNHS 518JS-(NL)
KNHS 518JMXSY-(NL)
KNHS 518JT-(NL)
KNHS 524JS-(NL)
KNHS 524JMXSY-(NL)
KNHS 524JT-(NL)
MS 51834 C104-(NL)
MS 51834-104-(NL)
MS 51834 A104-(NL)
MS 51834 C204-(NL)
MS 51834-204-(NL)
MS 51834 A204-(NL)
---
---
---
---
---
---
KNHS 616JS-(NL)
KNHS 616JMXSY-(NL)
KNHS 616JT-(NL)
KNHS 624JS-(NL)
KNHS 624JMXSY-(NL)
KNHS 624JT-(NL)
MS 51834 C105-(NL)
MS 51834-105-(NL)
MS 51834 A105-(NL)
MS 51834 C205-(NL)
MS 51834-205-(NL)
MS 51834 A205-(NL)
---
---
---
---
---
---
KNHS 714JS-(NL)
KNHS 714JMXSY-(NL)
KNHS 714JT-(NL)
KNHS 720JS-(NL)
KNHS 720JMXSY-(NL)
KNHS 720JT-(NL)
MS 51834 C106-(NL)
MS 51834-106-(NL)
MS 51834 A106-(NL)
MS 51834 C206-(NL)
MS 51834-206-(NL)
MS 51834 A206-(NL)
---
---
---
---
---
---
KNHS 813JS-(NL)
KNHS 813JMXSY-(NL)
KNHS 813JT-(NL)
KNHS 820JS-(NL)
KNHS 820JMXSY-(NL)
KNHS 820JT-(NL)
MS 51834 C107-(NL)
MS 51834-107-(NL)
MS 51834 A107-(NL)
MS 51834 C207-(NL)
MS 51834-207-(NL)
MS 51834 A207-(NL)
---
---
---
---
---
---
KNHS 912JS-(NL)
KNHS 912JMXSY-(NL)
KNHS 912JT-(NL)
KNHS 918JS-(NL)
KNHS 918JMXSY-(NL)
KNHS 918JT-(NL)
MS 51834 C108-(NL)
MS 51834-108-(NL)
MS 51834 A108-(NL)
MS 51834 C208-(NL)
MS 51834-208-(NL)
MS 51834 A208-(NL)
---
---
---
---
---
---
KNHS 1011JS-(NL)
KNHS 1018JS-(NL)
MS 51834 C109-(NL)
MS 51834-109-(NL)
MS 51834 C209-(NL)
MS 51834-209-(NL)
---
---
MS 51834 A109-(NL)
---
---
---
MS 51834 A209-(NL)
---
KNHS 1210JS-(NL)
KNHS 1216JS-(NL)
MS 51834 C110-(NL)
MS 51834-110-(NL)
MS 51834 C210-(NL)
MS 51834-210-(NL)
---
---
MS 51834 A110-(NL)
---
---
---
MS 51834 A210-(NL)
---
KNHS 1409JS-(NL)
KNHS 1414JS-(NL)
MS 51834 C111-(NL)
MS 51834-111-(NL)
MS 51834 C211-(NL)
MS 51834-211-(NL)
---
---
MS 51834 A111-(NL)
---
---
---
MS 51834 A211-(NL)
---
KNHS 1608JS-(NL)
KNHS 1612JS-(NL)
MS 51834 C112-(NL)
MS 51834-112-(NL)
MS 51834 C212-(NL)
MS 51834-212-(NL)
---
---
MS 51834 A112-(NL)
---
---
---
MS 51834 A212-(NL)
---
NOTE:
Replace (NL) in Part No. with Nut End Length in 1/16 increments.
Ex.: -22 = 1 3/8
NOTE:
When referring to MS Part Nos. use dash (-) in Part No. in lieu of D if drilled hole is not required. Use D in Part No. in lieu of
dash (-) only if drilled hole is required.
Ex.: MS 51834 C103 D24
Tridair Products 9
SECTION
Decimal/Metric Equivalents
Decimal Equivalents
DRILL
SIZES
M/M
DECIMAL
DRILL
SIZES
M/M
DECIMAL
DRILL
SIZES
M/M
DECIMAL
DRILL
SIZES
M/M
DECIMAL
..
..
..
80
79
1/64
..
78
77
..
76
75
74
..
73
72
71
..
70
69
68
1/32
..
67
66
65
..
64
63
62
61
..
60
59
58
57
56
3/64
55
54
53
1/16
52
51
50
49
48
5/64
47
..
46
.1
.2
.3
..
..
..
.4
..
..
.5
..
..
..
.6
..
..
..
.7
..
..
..
..
.8
..
..
..
.9
..
..
..
..
1.
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
2.
..
.0039
.0079
.0118
.0135
.0145
.0156
.0157
.0160
.0180
.0197
.0200
.0210
.0225
.0236
.0240
.0250
.0260
.0276
.0280
.0292
.0310
.0312
.0315
.0320
.0330
.0350
.0354
.0360
.0370
.0380
.0390
.0394
.0400
.0410
.0420
.0430
.0465
.0469
.0520
.0550
.0595
.0625
.0635
.0670
.0700
.0730
.0760
.0781
.0785
.0878
.0810
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
..
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
..
21
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
..
8
7
13/64
6
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
3.
..
..
..
..
..
..
..
..
..
..
..
..
..
4.
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
5.
..
..
..
..
.0820
.0860
.0890
.0935
.0937
.0960
.0980
.0995
.1015
.1040
.1065
.1094
.1100
.1110
.1130
.1160
.1181
.1200
.1250
.1285
.1360
.1405
.1406
.1440
.1470
.1495
.1520
.1540
.1562
.1570
.1575
.1590
.1610
.1660
.1695
.1719
.1730
.1770
.1800
.1820
.1850
.1875
.1890
.1910
.1935
.1960
.1968
.1990
.2010
.2031
.2040
5
4
3
7/32
2
1
A
15/64
..
B
C
D
1/4
E
F
G
17/64
H
I
..
J
K
9/32
L
M
19/64
N
5/16
..
O
P
21/64
Q
R
11/32
S
..
T
23/64
U
3/8
V
W
25/64
..
X
Y
13/32
Z
27/64
..
..
..
..
..
..
..
..
..
6.
..
..
..
..
..
..
..
..
..
..
7.
..
..
..
..
..
..
..
..
8.
..
..
..
..
..
..
..
9.
..
..
..
..
..
..
..
10.
..
..
..
..
..
11.
.2055
.2090
.2130
.2187
.2210
.2280
.2340
.2344
.2362
.2380
.2420
.2460
.2500
.2500
.2570
.2610
.2656
.2660
.2720
.2756
.2770
.2810
.2812
.2900
.2950
.2969
.3020
.3125
.3150
.3160
.3230
.3281
.3320
.3390
.3437
.3480
.3543
.3580
.3594
.3680
.3750
.3770
.3860
.3906
.3937
.3970
.4040
.4062
.4130
.4219
.4331
7/16
29/64
15/32
..
31/64
1/2
..
33/64
17/32
35/64
..
9/16
37/64
..
19/32
39/64
5/8
..
41/64
21/32
..
43/64
11/16
45/64
..
23/32
47/64
..
3/4
49/64
25/32
..
51/64
13/16
..
53/64
27/32
55/64
..
7/8
57/64
..
29/32
59/64
15/16
..
61/64
31/32
..
63/64
1
..
..
..
12.
..
..
13.
..
..
..
14.
..
..
15.
..
..
..
16.
..
..
17.
..
..
..
18.
..
..
19.
..
..
..
20.
..
..
21.
..
..
..
22.
..
..
23.
..
..
..
24.
..
..
25.
..
25.4
.4375
.4531
.4687
.4724
.4844
.5000
.5118
.5156
.5312
.5469
.5512
.5625
.5781
.5906
.5937
.6094
.6250
.6299
.6406
.6562
.6693
.6719
.6875
.7031
.7087
.7187
.7344
.7480
.7500
.7656
.7812
.7874
.7969
.8125
.8268
.8281
.8437
.8594
.8661
.8750
.8906
.9055
.9062
.9219
.9375
.9449
.9531
.9687
.9842
.9844
1.0000
Tridair Products 10
SECTION
GENERAL PURPOSE INSERTS
3
Inserts shown in this section were designed for general purpose
applications.
The Miniature size inserts are for use in electronic and aerospace
applications where size and strength are critical. These inserts may
be installed in sheet material as thin as 1/16 providing protrusion of
insert is not objectional. Their pull-out strength exceeds the tensile
strength of most Military Standard screws. the internal Thread Locking
versions conform to MIL-N-25027.
Lightweight, Heavy Duty and Extra Heavy Duty inserts are
offered in a wide choice of thread diameters and materials to suit
virtually any performance requirement. Each is available with Interal
Thread Locking features.
Carbon Steel inserts are for use in commerical or repair applications where NAS or MS specifications are not required.
INDEX
PAGE NO.
How To Order
12
Miniature Inserts
12
Lightweight Inserts
13
Heavy Duty Inserts
14
Extra Heavy Duty Inserts
15
Thinwall & Heavy Duty

16
Internal thread sizes larger than shown are available upon request.
SPECIFICATIONS:
All dimensions in inches.
Tolerances for all inserts in this section are .010 unless otherwise
specified.
Other materials available upon request.
Shear engagement area dimensions shown (sp. in.) are minimums.
NOTE: All internal threads are manufactured to
MIL-S-8879 except where noted.
INSTALLATION TAP-DRILL HOLE TOLERANCE

.120 TO .233 = -.001 + .002
.234 TO .500 = -.001 + .004
Above .500 = -.001 + .005
Tridair Products 11
LOCKING KEES
INTERNAL THREAD
LOCKING AREA
PAR T N O.
D IMEN SION S
IN TER N AL
TH R EAD
LOC K IN G
N ON -LOC K IN G
KNC 0080J
KNC C 0256J
KNC A0256J
KNC C L0256J
KNC AL0256J
KNC A0440J
KNC 0632J
KNC A0832J
KNC AL0440J
KNC L0632J
KNC AL0832J
IN TER N AL
TH R EAD
SIZE
R EMOVAL
D ATA
TAP D R ILL C 'SIN K

D IA.
SIZE
+.010
+.003
-.000
-.001
TH R EAD TAP
D R ILL
SH EAR
EN GAG.
0 - 80
UNJF-3B
6 - 40
UNF-3A
.0132
.10
.085
.120*
.140
6 - 40
.130
TKNC 008
#38
(.101)
2-56
UNJC -3B
6 - 40
UNF-3A
.0132
.10
.085
.120*
.140
6 - 40
.130
TKNC C L 02
#38
(.101)
2-56
UNJC -3B
8 - 32
UNC -3A
.0157
.12
.088
.134
.166
8 - 32
.140
TKNC 02
#33
(.113)
4 - 40
UNJC -3B
10 - 32
UNF-2A
.0302
.17
.125
.161
.194
10 - 32
.160
TKNC 04
#29
(.136)
6 - 32
UNJC -3B
12 - 28
UNF-2A
.0329
.17
.125
.187
.220
12 - 28
.160
TKNC 06
#21
(.159)
8 - 32
UNJC -3B
**
1/4 - 28
UNF-2A
.0669
.22
.175
.228
.255
1/4 - 28
.210
TKNC 08
#8
(.199)
** MODIFIED MINOR DIAMETER

8-32 is UNC-2B
SIZE
U N F-2B
IN STALLATION
TOOL
PAR T
D E P TH
N U MB ER
MIN .
SIZE
indicates that parts are normally available from stock.
How To Order:
THRU HOLE
BLIND HOLE
INSTALLATION INSTALLATION
IN STALLATION D ATA
EXTER N AL TH R EAD
SECTION
Miniature
Inserts
INSTALL INSERT .005 TO .015

BELOW SURFACE - DRIVE LOCKING
KEES DOWN
SIZE
D E P TH
1/16
3/32
1/8
* +.002 STANDARD MATERIALS: Insert: 303 CRES (passivated)

KEES: 302 CRES
-.001
See How To Order, Page 12 for more information.
Standard Insert Material and Finish: 303 CRES (passivated). No identifying marks on insert. Standard Kees Material:
302 corrosion resistant steel. Other materials available by special request. n This ordering code may be used for all inserts in
this section except for RKKA and RKK series inserts on Page 16 which are supplied in carbon steel only. These should be
ordered by part numbers as tabulated. n All others may also be ordered by part numbers tabulated unless a special finish,
length or material is required. In this case, use the ordering code below.
KNHL 428 J MX-9 SY

BASIC SERIES
HEAVY DUTY SERIES
INTERNAL THREAD LOCK
INTERNAL THREAD DIAMETER
in 1/16 inch increments, except below
1/4 inch bolt size
Numbered screw sizes as follows:
10 - #10 screw size
08 - #8 screw size
06 - #6 screw size
04 - #4 screw size
02 - #2 screw size
008 - #08 screw size
NO. OF INTERNAL THREADS PER INCH

DESIGNATES MIL-S-8879 INTERNAL
THREADS
FINISH DESIGNATION
(Used ONLY if finish required is other than standard.)
SP = Silver Plate per QQ-S-365
SX = Cad. Plate per QQ-P-416 Type I CL.3
SY = Cad. Plate per QQ-P-416 Type II CL.3
SZ = Cad. Plate per QQ-P-416 Type II CL.2
DRY FILM LUBRICANT

On all locking parts unless otherwise specified by adding NE to
finish designation.
LENGTH
Specified in 1/16 inch increments (used ONLY if length
required is other than standard) (EX: -7 for .437 length)
KEENSERTS shorter than standard lengths have no
counterbore unless requested.
MATERIAL DESIGNATION
(Used ONLY if material required is other than specified
standard.)
MX = Chrome Moly Steel 160,000 P.S.I. MIN. identified on top of

insert (TYP.) by two parallel dash marks (cad. plated per
QQ-P-416 TYPE 1 CL.3.
T = A286 CRES (passivated) identified on top of insert (TYP.) by
one dash mark.
BR = Bronze, completely non-magnetic inserts (cad. plated per
QQ-P-416 TYPE II CL.3)
Tridair Products 12
LOCKING KEES INSTALL INSERT .010 TO .030

BELOW SURFACE - DRIVE
LOCKING KEES DOWN
CBORE
DEPTH
.07
EXTERNAL
THREAD
PAR T N O.
N ON LOC K IN G
IN TER N AL
TH R EAD
LOC K IN G
KNL1032J
5/16 - 18
KNL1024J
10 - 24
KNL428J
KN420J
3/8 - 16
KNL420J
1/4 - 20
KNL524J
KN518J
7/16 - 14
KNL518J
5/16 - 18
KNL624J
KN616J
KNL616J
KN720J
KNL720J
KN714J
KNL714J
KN820J
KNL820J
KN813J
1/2 - 13
KNL813J
3/8 - 16
SIZE
C LASS 2B
MIN .
D E P TH
.272
.323
5/16 - 18
.37
TH R EAD TAP
.31
.1726
.2371
.2321
.3049
.3366
.4299
.37
.33
.34
.385
3/8 - 16
.43
.36
7/16 - 14
.4606
.5665
.4606
.41
.447
7/16 - 14
5/8 - 11
.5906
.7175
.5906
.42
5/32
11/32
TD 518L
TD 624L
.453
.510
1/2 - 13
.56
13/32
3/16
TD 616L
TD 720L
.516
.572
9/16 - 12
.62
15/32
TD 714L
.45
.62
7/32
9/32
.50
.7175
1/2 - 20
D E P TH
TD 524L
.397
.40
.56
SIZE
TD 420L
.37
.50
D R ILL
TD 428L
.332
.36
.43
IN STALLATION
TOOL
PAR T
N U MB ER
TD 1024L
.5665
9/16 - 12
R EMOVAL
D ATA
TD 1032L
.31
.3366
7/16 - 20
1/2 - 13
C 'SIN K
D IA.
+.010
-.000
.4299
3/8 - 24
.1517
.31
.2321
KN624J
TAP
D R ILL
D IA.
.3049
5/16 - 24
.0945
.1726
KN524J
.2371
1/4 - 28
.0945
KN428J
SH EAR
EN GAG.
.1517
10 - 32
KN1024J
THRU HOLE
INSTALLATION
IN STALLATION D ATA
EXTER N AL TH R EAD
SIZE C LASS
2A (MOD .)
KN1032J
BLIND HOLE
INSTALLATION
D IMEN SION S
IN TER N AL
TH R EAD
C LASS 3B
SECTION
Lightweight
Inserts
TD 820L
.578
.47
Inserts with internal thread size 5/16 and above furnished with 4 locking KEES.
.635
5/8 - 11
.68
17/32
TD 813L
STANDARD MATERIALS: Insert: 303 CRES (passivated)

KEES: 302 CRES
Notes & sketches
Tridair Products 13
SECTION
Heavy Duty
Inserts
3
PART NO.
INTERNAL
THREAD
LOC KING
NONLOC KING
D IMENSIONS
INTERNAL
THREAD
C LA S S 3B
EXTERNAL
THREAD
* SIZE
C LA S S
2A
KNH0832J
KNHL0832J
8 - 32
5/16 - 18
KNH1032J
KNHL1032J
KNH1024J
KNHL1024J
3/8 - 16
10 - 24
KNHL428J
KNH420J
KNHL420J
7/16 - 14
1/4 - 20
KNHL524J
KNH518J
KNHL518J
1/2 - 13
5/16 - 18
KNHL624J
KNH616J
KNHL616J
KNH720J
KNHL720J
KNH714J
KNHL714J
KNHL820J
9/16 - 12
3/8 - 16
KNH813J
KNHL813J
KNH918J
KNHL918J
KNH912J
KNHL912J
KNH1018J
KNHL1018J
KNH1011J
KNHL1011J
KNH1216J
KNHL1216J
KNH1210J
KNHL1210J
KNH1414J
KNHL1414J
KNH1409J
KNHL1409J
KNH1612J
KNHL1612J
KNH1608J
7/16 - 14
KNHL1608J
.1970
.2842
.2608
.3588
.33
.37
.07
.332
.385
3/8 - 16
THD 0832L
.37
.3843
.4975
.37
.5831
.7172
.42
.447
7/16 - 14
1/2 - 13
.7368
.8884
.42
.7368
13/16 - 16
9/16 - 12
1.0247
.510
1/2 - 13
.50
1.2493
.48
1.0247
THD 624L
.516
.572
9/16 - 12
.56
7/8 - 14
5/8 - 11
1.2415
1.4866
THD 720L
.578
.635
5/8 - 11
.68
1.2415
.10
.49
1-1/8 - 12
3/4 - 10
7/8 - 14
1-1/4 - 12
7/8 - 9
2.4478
.700
11/16 - 11
NS
.75
.766
.822
THD 918L
13/16 16
UN
.94
7/8 - 14
UNF
1.00
2.4901 1.12
2.4478
1.25
3.1370
1.25
3.0775
1.37
THD 1018L
.828
.885
3.1370
1.25
3.0775
1.37
1.062
1.145
1-1/8 - 12
UNF
1-3/8 - 12
3.7929
1.50
1.50

*MODIFIED MINOR DIAMETER
1.31
1.44
1.187
1.270
1-1/4 - 12
UNF
.77
1.56
1.44
1.56
1.56
.78
3.8381 1.37
3.7929
1.44
1.44
3.8381 1.37
1 - 12
.86
25/32
THD 1011L
.75
.69
23/32
THD 912L
1.31
.68
19/32
THD 813L
.57
1.25
3/16
THD 820L
.641
2.4901 1.12
3/4 - 16
17/32
THD 714L
.54
.87
15/32
THD 616L
1.4866
5/8 - 18
13/32
THD 518L
.47
.81
11/32
THD 524L
.453
1.2493
9/16 - 18
1/8
THD 420L
.46
.68
7/32
THD 1032L
.43
.8884
11/16 - 11
NS
D EPTH
THD 428L
.397
.41
.62
SIZE
THD 1024L
.37
.50
D RILL
9/32
.36
.34
.43
.5831
1/2 - 20
1-8
5/16 - 18
.7172
5/8 - 11
.323
.31
.3843
7/16 - 20
.272
.4975
KNH820J
.31
.2608
3/8 - 24
.31
.29
.1901
.3588
KNH624J
.1156
.1970
5/16 - 24
.04
.1156
KNH524J
.1517
THREAD TAP
C 'SINK
INSTALLATION
C'
TAP
D IA.
TOOL
BORE A D RILL
+.010
PART
SIZE
MIN.
D EPTH
D IA.
-.000 UNC -2B D EPTH
NUMBER
.2842
1/4 - 28
.0945
.1901
10 - 32
KNH428J
SHEAR
ENGAG.
REMOVAL
D ATA
INSTALLATION
1.312
1.395
1-3/8 - 12
UNF
1.68
1.56
1.68
THD 1216L
31/32
THD 1210L
THD 1414L
1-3/32
5/16
THD 1409L
THD 1612L
1-7/32
THD 1608L

KEES: 302 CRES
Tridair Products 14
Extra Heavy Duty

Inserts
EXTERNAL
THREAD
PART NO.
NONLOCKING
INTERNAL
THREAD
LOCKING
LOCKING KEES INSTALL INSERT .010 TO .030

BELOW SURFACE - DRIVE
LOCKING KEES DOWN
BLIND HOLE
INSTALLATION
DIMENSIONS
L
* SIZE
SHEAR
C LA S S 2A
ENGAG.
THRU HOLE
INSTALLATION
INSTALLATION DATA
C'
INTERNAL EXTERNAL THREAD

THREAD
C LA S S 3B
SECTION
CBORE
DEPTH
BORE
TAP
C'SINK
DRILL
DIA
DIA.
.010
SIZE
MIN.
-.000
UNC-2B
DEPTH
INSTALLATION
TOOL
PART
NUMBER
.323
5/16-18
.31
THXHD
DEPTH
THREAD TAP
REMOVAL
DATA
DRILL
SIZE
DEPTH
.0855
KNHXH0632J
KNHXHL0632J
6-32
5/16-18
KNHXH0832J
.0542
.25
.04
.272
.25
7/32
1/8
.1901
KNHXHL0832J
8-32
3/8-16
KNHXH1032J
.1156
.2299
KNHXHL1032J
10-32
7/16-14
KNHXH1024J
.31
.332
.385
3/8-16
.397
.447
7/16-14
THXHD
9/32
.31
.1403
.37
.31
THXHD
11/32
.2299
KNHXHL1024J
10-24
.1403
KNHXH428J
THXHD
.31
.2997
KNHXHL428J
1/4-28
1/2-13
KNHXH420J
KNHXHL420J
1/4-20
.2005
.2997
.2005
KNHXH524J
5/16-24
9/16-12
KNHXH518J
.3029
.453
.510
1/2-13
.44
15/32
THXHD
.36
.07
.4163
KNHXHL524J
THXHD
.33
.37
THXHD
.34
.43
.516
.572
9/16-12
.50
17/32
.4163
KNHXHL518J
5/16-18
.3029
KNHXH624J
THXHD
.37
.5584
KNHXHL624J
3/8-24
5/8-11
KNHXH616J
.4243
THXHD
.37
.50
.578
.635
5/8-11
.56
19/32
3/16
.5584
KNHXHL616J
3/8-16
.4243
KNHXH720J
THXHD
.41
.8000
KNHXHL720J
7/16-20
11/16-11
NS
KNHXH714J
KNHXHL714J
7/16-14
.6498
.6498
KNHXH820J
THXHD
.42
.62
.641
.700
.8000
11/16-11
NS
.68
23/32
THXHD
.46
1.0293
KNHXHL820J
1/2-20
13/16-16
KNHXH813J
.8642
THXHD
.42
.68
.766
.822
1.0293
KNHXHL813J
1/2-13
.8642
KNHXH918J
13/16-16
UNF
.75
25/32
THXHD
.47
1.3761
KNHXHL918J
9/16-18
7/8-14
KNHXH912J
1.1131
1.3761
KNHXHL912J
9/16-12
1.1131
KNHXH1018J
KNHXHL1018J
5/8-18
1-12
1.2770
.828
.885
KNHXHL1011J
.87
1.2770
KNHXH1216J
KNHXHL1216J
3/4-16
1-1/4-12
KNHXH1210J
KNHXHL1210J
3/4-10
KNHXH1414J
KNHXHL1414J
7/8-14
KNHXHL1409J
7/8-9
1-3/8-12
KNHXH1409J
KNHXH1612J
KNHXHL1612J
1-12
1-1/2-12
KNHXH1608J
KNHXHL1608J
1-8
1-12
UNF
1.00
27/32
THXHD
THXHD
.51
.937 1.020
1.12
2.5505
1.25
2.7966
1.12
2.5505
1.25
3.4652
1.25
3.2769
1.37
3.4652
1.25
1.37
4.2374
1.37
4.2135
1.50
4.2374
1.37
4.2135
1.50
1-3/32
THXHD
.59
2.7966
3.2769
.94
.10
1.6420
5/8-11
7/8-14
UNF
.54
1.6420
KNHXH1011J
THXHD
.48
.81
1.31
.57
1.187 1.270
1-1/4-12
UNF
.64
1.44
THXHD
1-7/32
1.31
1.44
THXHD
1.44
.63
1.312 1.395
1-3/8-12
UNF
.71
1.56
THXHD
1-7/32
1.44
1.56
5/16
THXHD
1.56
.70
1.437 1.520
.78
1-1/2-12
UNF
1.68
THXHD
1-11/32
1.56
1.68
THXHD

KEES: 302 CRES
Tridair Products 15
SECTION
Carbon Steel
Inserts
DIMENSIONS
PART NO.
RKKA 10-24
RKKA 10-32
RKKA 1/4-20
RKKA 1/4-28
RKKA 5/16-18
RKKA 5/16-24
RKKA 3/8-16
RKKA 3/8-24
RKKA 7/16-14
RKKA 7/16-20
RKKA 1/2-13
RKKA 1/2-20
RKK 8-32
RKK 10-24
RKK 10-32
RKK 1/4-20
RKK 1/4-28
RKK 5/16-18
RKK 5/16-24
RKK 3/8-16
RKK 3/8-24
RKK 7/16-14
RKK 7/16-20
RKK 1/2-13
RKK 1/2-20
RKK 9/16-12
RKK 9/16-18
RKK 5/8-11
RKK 5/8-18
RKK 3/4-10
RKK 3/4-16
RKK 7/8-9
RKK 7/8-14
RKK 1-8
RKK 1-12
RKK 1-14
RKK 1-1/8-7
RKK 1-1/8-12
RKK 1-1/8-18
RKK 1-1/4-7
RKK1-1/4-12
RKK 1-1/2-6
RKK 1-1/2-12
RKK 1-3/4-5
RKK 1-3/4-12
HEAVY DUTY
THINWALL
INTERNAL
THREAD SIZE
C LA S S 2B
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
1-14
1-1/8-7
1-1/8-12
1-1/8-18
1-1/4-7
1-1/4-12
1-1/2-6
1-1/2-12
1-3/4-5
1-3/4-12
EXTERNAL
THREAD SIZE
(MOD.) CLASS
2A
INSTALLATION DATA
REMOVAL DATA
DRILL
LENGTH
TAP DRILL
DIA.
C'SINK
DIA.
TAP SIZE
INSERT TOOL
CLASS 2B PART NUMBER
SIZE
DEPTH
5/32
5/16-18
.31
"I"
.32
5/16-18
TRKA 10
7/32
3/8-16
.37
"Q"
.38
3/8-16
TRKA 1/4
9/32
7/16-14
.43
"X"
.44
7/16-14
TRKA 5/16
11/32
1/2-13
.50
29/64
.51
1/2-13
TRKA 3/8
13/32
9/16-12
.56
33/64
.57
9/16-12
TRKA 7/16
15/32
5/8-11
5/16-18
.62
.31
37/64
"I"
.63
.32
5/8-11
5/16-18
TRKA 1/2
TRK 08
17/32
7/32
3/8-16
.31
"Q"
.38
3/8-16
TRK 10
9/32
7/16-14
.37
"X"
.44
7/16-14
TRK 1/4
11/32
1/2-13
.43
29/64
.51
1/2-13
TRK 5/16
13/32
9/16-12
.50
33/64
.57
9/16-12
TRK 3/8
15/32
5/8-11
.62
37/64
.63
5/8-11
TRK 7/16
17/32
TRK 1/2
21/32
45/64
.76
3/4-16
3/16
1/8
3/4-16
3/4-16
.81
7/8-14
.87
53/64
.88
7/8-14
TRK 5/8
25/32
1-1/8-12
1.12
1-1/16
1.14
1-1/8-12
TRK 3/4
31/32
1-1/4-12
1.25
1-3/16
1.27
1-1/4-12
TRK 7/8
1-3/32
1-3/8-12
1.37
1-5/16
1.39
1-3/8-12
TRK 1
1-7/32
1-1/2-12
1.62
1-7/16
1.52
1-1/2-12
TRK 1-1/8
1-11/32
1-5/8-12
1.81
1-9/16
1.64
1-5/8-12
TRK 1-1/4
1-15/32
1-7/8-12
.200
1-13/16
1.89
1-7/8-12
TRK 1-1/2
1-23/32
2-1/8-12
2.12
2-1/16
2.14
2-1/8-12
TRK 1-3/4
1-31/32
3/16
TRK 9/16
5/16
THREADS ARE MANUFACTURED TO MIL-S-7742.

Material: C1215 Steel or equivalent.
Finish: Parkerize
Tridair Products 16
Floating Inserts are designed to compensate automatically for

misalignment from .015 (for 2-56) up to .040 (for #10 and
larger sizes). The floater is supplied as a one-piece unit. Ideal for
use on curved surfaces or for use with flathead screws.
Blind End Inserts are used in applications where it is important to
keep a screw isolated from certain assemblies, such as electronic
circuitry. They assure that dust, chips and other foreign objects will
not contaminate an assembly.
Hydraulic Inserts are for use in hydraulic or fuel systems. They offer
strong, permanent threads and wear-resistant sealing surfaces in
soft metal casing or accessories. They permit repeated installation
and removal of AND and MS fittings without damage to expensive
castings and ports.
High-Strength Aluminum Inserts, designed for miniaturized
space and electronic systems, may be used in most any material,
including aluminum and megnesium. A significant reduction in
weight can be realized with these non-magentic inserts. They may
be installed in materials as thin as 1/8 (1/16 if end may protrude).
SECTION
SPECIAL PURPOSE INSERTS
4
INDEX
PAGE NO.
How To Order
18
Floating Inserts
18
Blind End Inserts
19
Hydraulic Inserts
20, 21
High-Strength
Aluminum Inserts
22
Solid Inserts
22
Cast-In Inserts
23
Solid Inserts are ideal for relocating holes that have been drilled or
tapped in wrong location, to fill holes that are too large, or to
salvage expensive casings.
Cast-In Inserts are designed for casting into place during die
casting, centrifugal, investment and permanent mold processes
and many plastic molding operations. Their high strength resists
high pressures generated during these processes.
SPECIFICATIONS: Tolerances for all inserts in this section are .010 unless
otherwise specified. Shear engagement area demensions shown (sq. in.) are minimums.
INSTALLATION TAP-DRILL HOLE TOLERANCE:
All dimensions in inches
.134 TO .228 = -.001 + .003

.234 TO .500 = -.001 + .004
Above .500 = -.001 + .005
NOTE: All internal threads are manufactured to

MIL-S-8879 except where noted.
Tridair Products 17
SECTION
Floating
Inserts
4
DIMENSIONS
PART
NO.
KNK(L)0256J
KNK(L)0440J
KNK(L)0632J
KNK(L)0832J
KNKD(L)1032J
KNKD(L)1024J
KNKD(L)428J
KNKD(L)420J
KNK(L)524J
KNK(L)518J
KNKD(L)624J
KNKD(L)616J
KNKD(L)714J
KNKD(L)720J
KNKD(L)820J
KNKD(L)813J
EXTERNAL THREAD
INTERNAL
THREAD
SIZE
SHEAR
CLASS 3B CLASS 2A ENGAG.
2-56
4-40
6-32
8-32
10-32
10-24
1/4-28
1/4-20
5/16-24
5/16-18
3/8-24
3/8-16
7/16-14
7/16-20
1/2-20
1/2-13
REMOVAL
DATA
DRILL
INSTALLATION DATA
L
.015
MIN.
C-C
DEVIA.
INT.
THREAD
LENGTH
DIST.
TAP
TO
DRILL
1st THD.
DIA.
(APPROX.)
THREAD TAP
INSTALC'SINK
LATION
M
I
N
.
DIA.
TOOL
S
I
Z
E
D
E
P
T
H
+.010
SIZE
DEPTH
PART
-.000 UNF-2B FULL
N
U
M
B
E
R
THD.
.250
1/4-28
.12
TK 02 #8(.199)
3/32
.323
5/16-24
.31
TK 04
7/32
1/8
.385
3/8-24
.38
TK06
9/32
.385
3/8-24
.38
TK08
9/32
1/4-28*
5/16-24
3/8-24
3/8-24
.0352
.0815
.1143
.1143
.19
.32
.36
.36
.015
.020
.030
.030
.10
.21
.22
.22
.05
.07
.08
.08
.228
.272
.332
.332
7/16-20*
.2202
.40
.040
.25
.15
.406
.447
7/16-20
.39
TK 010
11/32
1/2-20*
.2520
.40
.040
.25
.15
.468
.510
1/2-20
.39
TK 4
13/32
5/8-18*
.3992
.53
.040
.39
.13
.578
.635
5/8-18
.50
TK 5
17/32
3/4-16*
.6816
.65
.040
.45
.20
.703
.760
3/4-16
.62
TK6
21/32
7/8-14*
.7965
.67
.040
.45
.20
.828
.885
7/8-14
.62
TK 7
25/32
1-12*
.9972
.73
.040
.50
.23
.937
1.020
1-12
.65
TK 8
27/32
5/32
indicates that parts are normally

available from stock.
STANDARD MATERIAL FOR FLOATING INSERTS: KNK 0256 through

KNK 0832-303 Corrosion-resistant steel. KNKD 1032 through KNKD 813Use (L) in Part No. ONLY if Internal
chrome-Moly steel (Cad. Plated Type I, CL.3). 160,000 PSI MIN. U.T.S.
Thread Locking Feature is required.
How To Order: The products in this section may be ordered by part numbers tabulated unless a special finish, length or material is
required. In this case, use the ordering code below. Standard Material and Finish: For Floating Inserts: KNK 0256
through KNK 0832 - 303 Corrosion-resistant steel. KNKD 1032 through KNKD 813 - chrome-Moly steel (Cad. Plated
Type I, CL.3). 160,000 PSI MIN. U.T.S. For High Strength Aluminum Inserts: 7075-T6 Aluminum alloy. For Other Inserts
in Section 4: 303 CRES (passivated) unless otherwise specified. Standard Kees Material: 302 Corrosion-resistant steel
unless otherwise requested. (Beryllium copper KEES are standard on KNCE(L) and all bronze inserts.)
Tridair Products 18
3/16
5/16
SECTION
Blind End Inserts

Miniature,
Lightweight,
Heavy Duty
4
DIMENSIONS
INSTALLATION DATA
REMOVAL
DATA
EXTERNAL THREAD
(MOD.)
INTERNAL
PART NO.
THREAD
MINIATURE
LIGHTWEIGHT
HEAVY DUTY
SIZE
C LA S S 3B
INT.
SIZE
SHEAR
C LA S S 2A
ENGAG.
THD.
DEPTH
MIN.
EXT.
THD.
LGTH.
C'BORE
DEPTH (REF)
TAP
DRILL
DIA.
C'SINK
DIA
+.010
-.000
INSTALLATION
THREAD TAP
TOOL
DRILL
PART
SIZE
C LA S S 2B
MIN. DEPTH
NUMBER
SIZE
D EPTH
KNCB(L)0256J
2 - 56
*8 - 32
.0418
(.0181)
.24
.13
.18
C'SIN- .10
K
.134
.166
8-32
.24
TKNC 02
33(.113) 1/16
KNCB(L)0440J
4 - 40
*10 - 32
.0634
(.0342)
.31
.17
.22
C'SIN- .12
K
.161
.194
10-32
.28
TKNC 03
29(.136)
KNCB(L)0632J
6 - 32
*12 - 28
.0736
(.0376)
.39
.21
.22
C'SIN- .12
K
.187
.220
12-28
.28
TKNC 04
21(.159) 3/32
KNCB(L)0832J
8 - 32
1/4 - 28
.1002
(.0537)
.43
.25
.24
C'SIN- .13
K
.228
.255
1/4-28
.30
TKNC 05
8(.199)
KNB(L)1032J
10 - 32
5/16-18
.31
.31
.272
.323
5/16-18
.37
TD 1032L
7/32
10 - 24
.1517
(.0945)
.50
KNB(L)1024J
.2371
(.1726)
.62
.3049
(.2321)
.75
.4299
(.3366)
.81
.5665
(.4606)
.87
.7172
(.5831)
1.06
KNB(L)428J
1/4 - 28
KNB(L)420J
1/4 - 20
3/8-16
KNB(L)524J
5/16 - 24 7/16-14
KNB(L)518J
5/16 - 18
KNB(L)624J
3/8 - 24
KNB(L)616J
3/8 - 16
KNB(L)720J
7/16 - 20 9/16-12
KNB(L)714J
7/16 - 14
KNB(L)820J
1/2 - 20
KNB(L)813J
1/2 - 13
1/2-13
5/8-11
.07
.31
.31
.37
.37
.07
.33
.332
.385
3/8-16
.43
.36
.43
.43
.07
.34
.50
.07
.36
.397
.447
7/16-14
.50
.56
.07
.41
.453
.510
1/2-13
.56
.62
.07
.42
TD 524L
11/32
TD 624L
13/32
.516
.572
9/16-12
.62
TD 720L
15/32
TD 714L
.578
.635
5/8-11
.68
.47
TD 820L
17/32
TD 813L
KNHB(L)0832J
8-32
5/16-18
.1517
(.0945)
.50
.31
.31
.04
.31
.272
.323
5/16-18
.37
THD 0832L
7/32
KNHB(L)1032J
10-32
3/8-16
.1901
(.1156)
.56
.31
.31
.07
.31
.332
.385
3/8-16
.37
THD 1032L
9/32
7/16-14
.2842
(.1970)
.62
.37
.37
.07
.34
.397
.447
7/16-14
.43
.3588
(.2608)
.75
.4975
(.3843)
.81
.7172
(.5831)
1.00
.62
.62
.07
.42
11/16-11 .8884
NS
(.7368)
1.06
.68
.68
.10
.42
9/16-18 13/16-16 1.2493

(1.0247)
9/16-12
1.25
KNHB(L)912J
KNHB(L)1018J
5/8-18
5/8-11
1.4866
(1.2415)
1.31
KNHB(L)1011J
KNHB(L)1216J
3/4-16
3/4-10
2.7905
(.2.4478)
1.75
KNHB(L)1210J
3.4747
(.3.0775)
1.94
4.2282
(3.7929)
2.12
KNHB(L)1024J
10-24
KNHB(L)428J
1/4-28
KNHB(L)420J
1/4-20
KNHB(L)524J
5/16-24
KNHB(L)518J
5/16-18
KNHB(L)624J
3/8-24
KNHB(L)616J
3/8-16
KNHB(L)720J
7/16-20
KNHB(L)714J
7/16-14
KNHB(L)820J
1/2-20
KNHB(L)813J
1/2-13
KNHB(L)918J
KNHB(L)1414J
7/8-14
KNHB(L)1409J
7/8-9
KNHB(L)1612J
1-12
KNHB(L)1608J
1-8
1/2-13
9/16-12
5/8-11
7/8-14
1-1/8-12
1-1/4-12
1-3/8-12
3/16
TD 616L
.45
.62
9/32
TD 518L
.40
.56
TD 428L
TD 420L
.37
.50
/32
TD1024L
1/8
.31
THD 1024L
.36
.43
.43
.07
.34
.50
.07
.37
.453
.510
1/2-13
.50
.516
.572
9/16-12
.56
.578
.635
.641
.48
5/8-11
.68
THD 720L
.700 11/16-11
NS
.75
THD 820L
.87
.10
.49
.766
.822 13/16-16
.94
1.25
.10
.828
.885
7/8-14
1.00
1.37
.10
.68 1.062 1.145 1-1/8-12
1.44
1.50
.10
.69 1.187 1.270 1-1/4-12
THD 918L
23/32
THD 1018L
25/32
THD 1216L
31/32
1.56
THD 1414L
1-3/32
THD 1409L
.78 1.312 1.395 1-3/8-12

.86
19/32
THD 1210L
.77
1.50
3/16
THD 1011L
.75
1.37
17/32
THD 912L
.57
1.25
15/32
THD 813L
.54
.87
THD 624L
THD 714L
.47
.10
13/32
THD 616L
.46
.81
THD 524L
THD 518L
.41
.81
11/32
THD 420L
.37
.50
THD 428L
1.68
THD 1612L
1-7/32
5/16
THD 1608L
*STANDARD CLASS 2 A EXTERNAL THREAD. NO MODIFIED MINOR DIAMETER

Use (L) Part No. ONLY if Internal Thread Locking feature is required.
Inserts with internal thread size 5/16 and above furnished with 4 locking KEES
1
KEES: 302 CRES

See How To Order, Page 18 for more information
.005 to .015 for miniatures
Tridair Products 19
SECTION
Hydraulic Inserts
4
For all standard MS 33649 port connections.
Internal configuration per MS 33649.
FITTING DIMENSIONS
PART NO. TUBING
D
O.D. +.000
(REF.) -.002
L
+.000
-.020
G
.002
.757
.812
.604
REMOVAL
DATA
INSTALLATION DATA
INTERNAL
EXTERNAL
MS 33649
THREADS
THREADS
D ASH
UNJF-3B
UNJF-3A
NUMBER
PER MIL-S-8879 PER MIL-S-8879
5/16-24
1/2-20
-5
C
.001
B
MIN.
O-RING
(REF.)
MS 28778
.760
.87
-5
INSTALLATION
DRILL
TOOL
PART
SIZE DEPTH
NUMBER
TDKNYJ2
11/16
KNYJ -2
1/8
KNYJ - 3
3/16
.819
.812
.667
3/8-24
9/16-18
-6
.822
.87
-6
TDKNYJ3
KNYJ - 4
1/4
1.007
.812
.730
7/16-20
3/4-16
-8
1.010
.87
-8
TDKNYJ4
15/16
KNYJ - 5
5/16
1.007
.812
.792
1/2-20
3/4-16
-8
1.010
.87
-8
TDKNYJ5
15/16
KNYJ - 6
3/8
1.132
.875
.854
9/16-18
7/8-14
-10
1.135
.93
-10
TDKNYJ6
1-1/16
13/16
KNYJ - 8
1/2
1.410
1.000
1.042
3/4-16
1-1/16-12**
-12
1.413
1.06
-12
TDKNYJ8
1-11/32
KNYJ - 10
5/8
1.663
1.125
1.167
7/8-14
1-5/16-12**
-16
1.666
1.25
-16
TDKNYJ10
1-9/16
KNYJ - 12
3/4
1.977
1.250
1.417
1-1/16-12*
1-5/8-12**
-20
1.980
1.37
-20
TDKNYJ12
1-7/8
3/16
How To Install
1. Lubricate insert and O-Ring and assemble,
cover threads prior to assembly of O-Ring.
2. Screw insert/O-Ring assembly into tapped
hole, until properly seated using tool
specified. Surface F should be below
parent material; surface G above.
3. Turn tool over and drive home the four
KEES, using tool and ordinary hammer or
press.
*O-Rings for KNYJ and KNYDJ series to be supplied by user.
KNYJ SERIES
O-Ring INSTALLATION
INSERT
(REF.)
TOOL PART
NUMBER
MS28778
NUMBER
KNYJ -2
-5
TDKNYJ 2
KNYJ -3
-6
TDKNYJ 3
KNYJ - 4
-8
TDKNYJ 4
KNYJ - 5
-8
TDKNYJ 5
KNYJ - 6
-10
TDKNYJ 6
KNYJ - 8
-12
TDKNYJ 8
KNYJ - 10
-16
TDKNYJ 10
KNYJ - 12
-20
TDKNYJ 12
SEATING
TORQUE
IN-LBS
40-65
90-100
135-150
180-200
270-300
450-500
650-700
900-1000
KNYDJ SERIES
TEFLON
INSTALL.
INSERT
SEAL
SEATING
TOOL
PART
EQUIV. TO
TORQUE
DASH NO.
NUMBER DIM. OF
IN-LBS.
TKNYDJ
MS28775
KNYDJ -2
-110
-2
40-65
KNYDJ - 3
-111
-3
90-100
KNYDJ - 4
-112
-4
135-150
KNYDJ - 5
-114
-5
180-200
KNYDJ - 6
-114
-6
270-300
KNYDJ - 7
-115
-7
350-400
KNYDJ - 8
-117
-8
450-500
KNYDJ - 9
-118
-9
550-600
KNYDJ - 10
-119
-10
650-700
KNYDJ - 11
-121
-11
750-850
KNYDJ - 12
-122
-12
900-1000
KNYDJ - 14
-124
-14
1050-1200
KNYDJ - 16
-126
-16
1200-1400
Tridair Products 20
SECTION
Hydraulic Inserts
continued:
For pressures to 3000 psi

(One piece unit complete with Teflon seal.)
n Unlimited shelf life.
n Minimum space and weight.
4
DIMENSIONS
PART
NO.
KNYDJ - 2
KNYDJ - 3
KNYDJ - 4
KNYDJ - 5
KNYDJ - 6
KNYDJ - 7
KNYDJ - 8
KNYDJ - 9
KNYDJ - 10
KNYDJ - 11
KNYDJ - 12
KNYDJ - 14
KNYDJ - 16
TUBING
O.D.
(REF.)
D
DIA.
.002
L
.020
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
.676
.739
.802
.864
.926
.989
1.176
1.238
1.301
1.488
1.551
1.676
1.801
.658
.658
.667
.676
.685
.748
.805
.840
.880
.900
.919
.942
.966
INTERNAL
THREADS
C LA S S 3B
PER MIL-S-8879
5/16 - 24 UNJF
3/8 - 24 UNJF
7/16 - 20 UNJF
1/2 - 20 UNJF
9/16 - 18 UNJF
5/8 - 18 UNJF
3/4 - 16 UNJF
13/16 - 16 UNJ
7/8 - 14 UNJF
1 - 12 UNJF
1-1/16 - 12 UNJ
1-3/8 - 16 UNJ
1-5/16 -12 UNJ
EXTERNAL
THREADS
C LA S S 3A
F
DIA.
.002
G
DIA.
.002
1/2 - 20 UNF
9/16 - 18 UNF
5/8 - 18 UNF
3/4 - 16 UNF
3/4 - 16 UNF
13/16 - 16 UN
15/16 - 16 UN
1 - 16 UN
1-1/16 - 16 UN
1-3/16 - 16 UN
1-1/4 - 16 UN
1-3/8- 16 UN
1-1/2 - 16 UN
.399
.462
.524
.649
.649
.711
.837
.899
.962
1.087
1.149
1.274
1.399
.604
.667
.730
.792
.854
.917
1.042
1.104
1.167
1.354
1.417
1.542
1.667
INSTALLATION DATA
PART
NO.
KNYDJ - 2
KNYDJ - 3
KNYDJ - 4
KNYDJ - 5
KNYDJ - 6
KNYDJ - 7
KNYDJ - 8
KNYDJ - 9
KNYDJ - 10
KNYDJ - 11
KNYDJ - 12
KNYDJ - 14
KNYDJ - 16
A
DIA.
+.005
-.001
.453
.515
.578
.687
.687
.750
.875
.937
1.000
1.125
1.188
1.312
1.438
B
DIA.
.001
Y
DEPTH
OF
C'BORE
C
DIA.
+.005
-.000
E
+.015
-.000
.680
.743
.806
.868
.930
.993
1.180
1.242
1.305
1.492
1.555
1.680
1.805
.205/.215
.205/.215
.205/.215
.205/.215
.205/.215
.205/.215
.335/.325
.335/.325
.335/.325
.335/.325
.335/.325
.335/.325
.335/.325
.562
.625
.687
.812
.812
.875
1.000
1.062
1.125
1.250
1.312
1.437
1.562
.351
.351
.351
.351
.351
.351
.470
.470
.470
.470
.470
.470
.470
X
DEPTH
OF
FLANGE
.210/.200
.210/.200
.210/.200
.210/.200
.210/.200
.210/.200
.330/.320
.330/.320
.330/.320
.330/.320
.330/.320
.330/.320
.330/.320
REMOVAL
DATA
TEFLON INSTALL.
H
DRILL
SEAL
TOOL
MIN.
EQUIV. TO DASH
THREADS THREAD
DIM. OF
NO.
SIZE DEPTH
CLASS 3B DEPTH
MS 28775 TKNYDJ
1/2 - 20 UNF
.72
-110
-2
5/8
9/16 - 18 UNF
.72
-111
-3
11/16
5/8 - 18 UNF
.73
-112
-4
3/4
1/8
3/4 - 16 UNF
.74
-114
-5
13/16
3/4 - 16 UNF
.75
-114
-6
7/8
13/16 - 16 UN
.81
-115
-7
15/16
15/16 - 16 UN
.87
-117
-8
1-1/16
1-16 UN
.90
-118
-9
1-1/8
1-1/16 - 16 UN
.94
-119
-10
1-3/16
1-3/16 - 16 UN
.96
-121
-11
1-3/8
3/16
1-1/4 - 16 UN
.98
-122
-12
1-7/16
1-3/8 - 16 UN
1.00
-124
-14
1-9/16
1-1/2 - 16 UN
1.03
-126
-16
1-11/16
I
NOTE: KNYDJ series inserts normally supplied with factory installed O-RIngs.
Teflon O-Rings per AMS 3651, Viton O-Rings and Buna-N O-Rings available.
Please specify at time of quotation.

KEES: 302 CRES
How to prepare hole

1. Drill A Diameter . . . Minus 1/64
2. Ream A and CBore B to Y Depth
3. Drill C Diameter to E Depth
4. Tap I Thread to H Minimum Perfect Threads
Tridair Products 21
SECTION
High-Strength
Aluminum Inserts
4
DIMENSIONS
INTERNAL
EXTERNAL THREAD
THREAD
SIZE
SIZE
SHEAR
UNC-3B** CLASS 2A ENGAG.
8-32
KNCE(L) 0256J
2-56
.0157
UNC-2A
10-32
KNCE(L) 0440J
4-40
.0302
UNF-2A
12-28
KNCE(L) 0632J
6-32
.0329
UNF-2A
KNCE(L)
*1/4-28
8-32
.0669
0832J-.22
UNF-2A
REMOVAL
DATA
INSTALLATION DATA
PART NO.
TAP DRILL C'SINK

INSTALLATION
THREAD TAP
SIZE
DIA.
TOOL
+.003
+.010
PART
SIZE
MIN.
-.001
-.000 UNF-2B DEPTH
NUMBER
.12 .088
.134
.166
8-32
.140
TKNC 02
.17 .125
.161
.194
10-32
.160
TKNC 04
.17 .125
.187
.220
12-28
.160
TKNC 06
.22 .175
.228
.255
1/4-28
.210
TKNC 08
DRILL
SIZE
#33
(.113)
#29
(.136)
#21
(.159)
#8
(.199)
DEPTH
1/16
3/32
1/8
** PER MIL-S-8879
MATERIAL: 7075-T6 ALUMINUM ALLOY. NON-MAGNETIC BERYLLIUM COPPER KEES.
FINISH: BLACK ANODIZED - FOR INSERTS WITH INTERNAL THREAD LOCK.
GREEN ANODIZED - FOR INSERTS WITH NO INTERNAL THREAD LOCK.
INTERNAL THREAD LOCK VERSIONS CONFORM TO MIL-N-25027.
Solid
Inserts
DIMENSIONS
PART NO.
INSTALLATION DATA
EXTERNAL
THREAD
THREAD TAP
C'SINK
INSTALLATION
DIA.
PART
MIN.
+.010
TOOL
SIZE
SHEAR
SIZE
DEPTH
-.000 UN-2B
NUMBER
CLASS 2A ENGAG.
FULL THD.
5/16-18
.1517 .31 .272
.323 5/16-18
.37
TJ 5
3/8-16
.1901 .31 .332
.385
3/8-16
.37
TJ 6
7/16-14
.2842 .37 .397
.447 7/16-14
.43
TJ 7
1/2-13
.3588 .43 .453
.510
1/2-13
.50
TJ 8
9/16-12
.4975 .50 .516
.572 9/16-12
.56
TJ 9
5/8-11
.7172 .62 .578
.635
5/8-11
.68
TJ 10
11/16-11
11/16-11
.8884 .68
.641
.700
.75
TJ 11
NS
NS
13/16-16 1.2493 .81 .766
.822 13/16-16
.94
TJ 13
7/8-14
1.4866 .87 .828
.885
7/8-14
1.00
TJ 14
1-1/8-12 2.4901 1.12 1.062 1.145 1-1/8-12
1.31
TJ 18
1-1/4-12 3.1370 1.25 1.187 1.270 1-1/4-12
1.44
TJ 20
1-3/8-12 3.8381 1.37 1.312 1.395 1-3/8-12
1.56
TJ 22
L
KNJ 5
KNJ 6
KNJ 7
KNJ 8
KNJ 9
KNJ 10
KNJ 11
KNJ 13
KNJ 14
KNJ 18
KNJ 20
KNJ 22
TAP
DRILL
DIA.
INSERTS WITH EXTERNAL THREAD SIZES 7/16 AND

ABOVE FURNISHED WITH 4 LOCKING KEES.
REMOVAL
DATA
DRILL
SIZE DEPTH
7/32
9/32
11/32
13/32
15/32
17/32
1/8
3/16
19/32
23/32
25/32
31/32
1-3/32
1-7/32
5/16

KEES: 302 CRES
Tridair Products 22
BX(L) 0440
4-40
.16
.31 3/16
.200
.160
BX(L) 0632
6-32
.19
.34
.262
.200
1/4
BX(L) 0832
8-32
.22
.37 9/32
.294
.230
BX(L) 1032
10-32
.28
.43 5/16
.324
.265
BX(L) 428
1/4-28
.37
.62
3/8
.386
.345
BX(L) 524
5/16-24
.43
.68 7/16
.451
.407
BX(L) 624
3/8-24
.50
.75 9/16
.576
.522
3/32
SECTION
Cast-In
Inserts
DIMENSIONS
T
S
PART
INTERNAL
K
MIN.
DIST.
NO.
THREAD
L
D
OVER N
FULL
TO
C LA S S 3B
KNURL
THREAD
LOCK
BX(L) 0256
2-56
.14
.28 5/32
.166 .116 1/16
1/8
3/16
NO DRY FILM LUBRICANT ON LOCKING PARTS.

NON-LOCKING PART ALSO AVAILABLE IN BRASS.
Tridair Products 23
THIS PAGE INTENTIONALLY LEFT BLANK
Tridair Products 24
SECTION
METRIC INSERTS
5
Tridairs full line of Metric KEENSERTS Inserts are used in the same
way and have the same design features as the General Purpose
Inserts shown in this catalog.
INDEX
PAGE NO.
How To Order
25
Miniature Series Inserts
26
Lightweight Series Inserts
26
Heavy Duty Series Inserts
27
Thinwall & Heavy Duty

28
SPECIFICATIONS:
All dimensions are in millimeters.
Shear engagement area dimensions in MM2.
Other materials available upon request.Threads are manufactured to
I.S.O. stds.
How To Order:
Standard Material and Finish: 303 CRES (passivated). Has no identifying marks on insert. n Order by part numbers
tabulated unless special finish, length or material is required. In this case, use the ordering code below.
n KEES: 302 corrosion resistant steel. This ordering code may be used for all inserts in this section except the
KNMF Series Inserts on Page 28 which are supplied in Carbon Steel only.
Miniature Insert Series:
KNCML 2x0.4-4.0
BASIC SERIES
MINIATURE SERIES
METRIC
(if required)
INTERNAL THREAD IN MILLIMETERS
THREAD PITCH IN MILLIMETERS
LENGTH IN MILLIMETER INCREMENTS.

(Used ONLY if length required is other than standard lengths.)
Lightweight and Heavy Duty Series:
KNHML 8x1.25 T 20 SP
BASIC SERIES
HEAVY DUTY SERIES
METRIC
(if required)
INTERNAL THREAD DIAMETER
IN MILLIMETERS
THREAD PITCH IN MILLIMETERS
FINISH DESIGNATION
(Used ONLY if finish required is other than standard.)
SP = Silver Plate per QQ-S-365
SX = Cad. Plate per QQ-P-416 Type I CL.3
SY = Cad. Plate per QQ-P-416 Type II CL.3
SZ = Cad. Plate per QQ-P-416 Type II CL.2
LENGTH IN MILLIMETERS
(Used ONLY if length required is other than standard lengths
shown above.)
(Used ONLY if material required is other than specified
standard.)
MX = Chrome Moly Steel 160,000 P.S.I. MIN. identified on top of
insert (TYP.) by two parallel dash marks (cad. plated per
QQ-P-416 TYPE 1 CL.3.
T = A286 CRES (passivated) identified on top of insert (TYP.) by
one dash mark.
BR = Bronze, completely non-magnetic inserts (cad. plated per
QQ-P-416 TYPE II CL.3)
Tridair Products 25
SECTION
Minature
Inserts
PART NO.
DIMENSIONS
THREAD
L
SIZE
SHEAR 0.25
C LA S S
CLASS 4h ENGAG.
5H
INTERNAL
THREAD
LOCKING
NON-LOCKING
KNCM 2x0.4
M 2x0.4
M 4x0.7
KNCML 2x0.4
16.5
3.0
10.3
KNCM 2.5x0.45
M 2.5x0.45 M 4.5x0.75
KNCML 2.5x0.45
KNCM 3x0.5
M 3x0.5
KNCML 3x0.5
KNCM 4x0.7
M 5x0.8
26.5
15.9
33.1
21.4
58.4
REMOVAL
INSTALLATION DATA
DATA
THREAD TAP
DRILL
C'SINK
INSTALLATION
TAP
DIA.
TOOL
DRILL
SIZE
MIN.
+.25
PART
SIZE DEPTH
DIA.
-.00 CLASS 6h DEPTH
NUMBER
3.4
4.1
M 4x0.7
4.0
TKNCM
2x0.4
2.8
2.00
3.9
4.6
M 4.5x0.75
5.0
TKNCM
2.5x0.45
3.0
2.00
4.4
5.1
M 5x.8
5.5
TKNCM
3x0.5
3.5
2.25
2.2
3.8
2.7
4.25
3.1
TKNCM
4x0.7
4.6
2.50
KNCML 4x0.7
42.9
4.1
EXTERNAL THREAD FURNISHED STANDARD MATERIALS: Insert: 303 CRES (passivated) INSTALLATION TAP-DRILL TOLERANCE 2.0 TO 5.5= -.025 +.08
KEES: 302 CRES
WITH 2 LOCKING KEES.
M 4x0.7
M 6x0.75
5.25
5.5
6.1
M 6x0.75
6.5
See How To Order, page 25 for more information.
Lightweight
Inserts
INSTALLATION TAP-DRILL TOLERANCE
4.0 TO 12.70= -.025 +.100
ABOVE 12.70 = -.025 + .130
PART NO.
NON-LOCKING
INTERNAL
INTERNAL
THREAD
LOCKING
KNM 5x0.8
KNML 5x0.8
KNM 5x0.5
KNML 5x0.5
KNM 6x1.0
KNML 6x1.0
KNM 6x0.75
KNML 6x0.75
KNM 8x1.25
KNML 8x1.25
KNM 8x1.0
KNML 8x1.0
KNM 10x1.5
KNML 10x1.5
KNM 10x1.25
KNML 10x1.25
KNM 12x1.75
KNML 12x1.75
KNM 12x1.25
KNML 12x1.25
DIMENSIONS
INTERNAL
EXTERNAL THREAD
THREAD
C LA S S
SIZE
SHEAR.
5H
CLASS 4h ENGAG.
104.9
M 5x0.8 M 8x1.25
83.1
104.9
M 5x0.5 M 8x1.25
83.1
177.7
M 6x1.0 M 10x1.25
152.7
177.7
M 6x0.75 M 10x1.25
152.7
266.7
M 8x1.25 M 12x1.25
242.5
266.7
M 8x1.0 M 12x1.25
242.5
341.6
M 10x1.5 M 14x1.5
316.4
341.6
M 10x1.25 M 14x1.5
316.4
470.2
M 12x1.75 M 16x1.5
441.4
470.2
M 12x1.25 M 16x1.5
441.4
REMOVAL
DATA
INSTALLATION DATA
L
0.3
8.0
8.0
10.0
10.0
12.0
12.0
14.0
14.0
16.0
16.0
TAP
DRILL
DIA.
6.9
7.6
6.9
7.0
8.8
8.2
8.8
7.3
10.8
9.5
10.8
9.0
12.8
10.0
12.8
9.5
14.75
11.20
14.75
10.20

KEES: 302 CRES
C'SINK
DIA.
+.25
-.00
THREAD TAP
SIZE
MIN.
CLASS 6H DEPTH
INSTALLATION
TOOL
PART
NUMBER
DRILL
SIZE DEPTH
8.25
M 8x1.25
9.5
TM - 5
5.50
8.25
M 8x1.25
9.5
TM - 5
5.50
10.25 M 10x1.25
11.5
TM - 6
7.50
10.25 M 10x1.25
11.5
TM - 6
7.50
12.25 M 12x1.25
13.5
TM - 8
9.50
12.25 M 12x1.25
13.5
TM - 8
9.50
14.25
M 14x1.5
15.5
TM - 10
11.50
14.25
M 14x1.5
15.5
TM - 10
11.50
16.25
M 16x1.5
17.5
TM - 12
13.50
16.25
M 16x1.5
17.5
TM - 12
13.50
4.00
4.75
INSERTS WITH INTERNAL THREAD SIZES OF KNM 6 AND

UNDER ARE FURNISHED WITH 2 LOCKING KEES, KNM 8 AND
ABOVE SIZES ARE FURNISHED WITH 4 LOCKING KEES.
Tridair Products 26
SECTION
Heavy Duty
Inserts
PART NO.
NONLOCKING
INTERNAL
THREAD
LOCKING
KNHM 4x0.7
KNHML 4x0.7
KNHM 5x0.8
KNHML 5x0.8
KNHM 6x1.0
KNHML 6x1.0
KNHM 8x1.25
KNHML 8x1.25
KNHM 8x1.0
KNHML 8x1.0
KNHM 10x1.5
KNHML 10x1.5
KNHM 10x1.25
KNHML 10x1.25
KNHM 12x1.75
KNHML 12x1.75
KNHM 12x1.5
KNHML 12x1.5
KNHM 12x1.25
KNHML 12x1.25
KNHM 14x2.0
KNHML 14x2.0
KNHM 14x1.5
KNHML 14x1.5
KNHM 16x2.0
KNHML 16x2.0
KNHM 16x1.5
KNHML 12x1.5
KNHM 18x1.5
KNHML 18x1.5
KNHM 20x2.5
KNHML 20x2.5
KNHM 20x1.5
KNHML 20x1.5
KNHM 22x1.5
KNHML 22x1.5
KNHM 24x3.0
KNHML 24x3.0
KNHM 24x2.0
KNHML 24x2.0
DIMENSIONS
INSTALLATION DATA

THREAD
L
SHEAR
SIZE
C LA S S
ENGAG. 0.3
C
L
A
S
S
4
h
5H
(MM2)*
M 4x0.7
M 8x1.25
M 5x0.8
M 10x1.25
M 6x1.0
M 12x1.25
M 8x1.25
M 14x1.5
M 8x1.0
M 14x1.5
M 10x1.5
M 16x1.5
M 10x1.25 M 16x1.5
M 12x1.75 M 18x1.5
M 12x1.5
M 18x1.5
M 12x1.25 M 18x1.5
M 14x2.0
M 20x1.5
M 14x1.5
M 20x1.5
M 16x2.0
M 22x1.5
M 16x1.5
M 22x1.5
M 18x1.5
M 24x1.5
M 20x2.5
M 30x2.0
M 20x1.5
M 30x2.0
M 22x1.5
M 32x2.0
M 24x3.0
M 33x2.0
M 24x2.0
M 33x2.0
104.9
83.1
177.7
152.7
266.7
242.5
341.6
316.4
341.6
316.4
470.2
441.4
470.2
441.4
608.5
561.8
608.5
561.8
608.5
561.8
770.5
724.4
770.5
724.4
896.8
855.2
896.8
855.2
1084.4
1051.5
1774.3
1736.4
1774.3
1736.4
2045.9
2014.7
2189.4
2161.9
2189.4
2161.9
INSERTS WITH INTERNAL THREAD SIZES OF KNM 6 AND

UNDER ARE FURNISHED WITH 2 LOCKING KEES. KNM 8 AND
ABOVE SIZES ARE FURNISHED WITH 4 LOCKING KEES.
*TO CONVERT MM2 TO IN2 MULTIPLY MM2 BY .001550
8.0
10.0
12.0
14.0
14.0
16.0
16.0
18.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
30.0
30.0
32.0
33.0
33.0
8.0
8.7
9.5
10.0
10.0
10.0
10.0
10.7
10.7
10.7
12.4
12.4
12.4
12.4
16.8
17.5
17.5
18.3
19.0
19.0
TAP
DRILL
DIA.
THREAD TAP INSTALLATION

C'SINK
DIA.
TOOL
SIZE
MIN.
+.25
PART
C
L
A
S
S
6
H
D
E
P
T
H
-.00
NUMBER
REMOVAL
DATA
DRILL
SIZE
DEPTH
6.9
8.25
M 8x1.25
9.5
THM - 4
5.50
4.00
8.8
10.25
M 10x1.25
12.5
THM - 5
7.50
4.75
10.8
12.25
M 12x1.25
14.5
THM - 6
9.50
4.75
12.8
14.25
M 14x1.5
16.5
THM - 8
11.50
4.75
12.8
14.25
M 14x1.5
16.5
THM - 8
11.50
4.75
14.75
16.25
M 16x1.5
18.5
THM - 10
13.50
4.75
14.75
16.25
M 16x1.5
18.5
THM - 10
13.50
4.75
16.75
18.25
M 18x1.5
20.5
THM - 12
15.50
4.75
16.75
18.25
M 18x1.5
20.5
THM - 12
15.50
4.75
16.75
18.25
M 18x1.5
20.5
THM - 12
15.50
4.75
18.75
20.25
M 20x1.5
22.5
THM - 14
17.50
4.75
18.75
20.25
M 20x1.5
22.5
THM - 14
17.50
4.75
20.5
22.25
M 22x1.5
24.5
THM - 16
17.75
6.35
20.5
22.25
M 22x1.5
24.5
THM - 16
17.75
6.35
22.5
24.25
M 24x1.5
26.5
THM - 18
19.75
6.35
28.0
30.25
M 30x2.0
34.5
THM - 20
25.75
6.35
28.0
30.25
M 30x2.0
34.5
THM - 20
25.75
6.35
30.0
32.25
M 32x2.0
36.5
THM - 22
27.75
6.35
31.0
33.25
M 33x2.0
37.5
THM - 24
28.75
6.35
31.0
33.25
M 33x2.0
37.5
THM - 24
28.75
6.35
INSTALLATION TAP-DRILL TOLERANCE

4.0 TO 12.70= -.025 + .100
ABOVE 12.70= -.025 + .130
KEES: 302 CRES
Tridair Products 27
Thinwall
& Heavy Duty Series
SECTION
(Carbon Steel Material only)
5
REMOVAL
DATA
INSTALLATION DATA
PART
NO.
KNM 5x0.8F
KNM 6X1F
KNM 7X1F
KNM 8X1F
KNM 8X1.25F
KNM 10X1.25F
KNM 10X1.5F
KNM 12X1.25F
KNM 12X1.75F
KNM 14X1.5F
KNM 14X2F
KNM 16X1.5F
KNM 18X1.5F
KNM 20X1.5F
KNM 22X1.5F
KNM 24X2F
INTERNAL
THREAD
SIZE
M 5x0.8
M 6x1.0
M 7x1.0
M 8x1.0
M 8x1.25
M 10x1.25
M 10x1.5
M 12x1.25
M 12x1.75
M 14x1.5
M 14x2.0
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x2.0
EXTERNAL
TAP
THREAD LENGTH DRILL
SIZE
DIA.
M 8x1.25
8
6.9
M 10x1.25
10
8.8
M 11x1.0
11
9.8
M 12x1.25
12
10.8
M 12x1.25
M 14x1.5
14
12.8
M 14x1.5
M 16x1.5
16
14.75
M 16x1.5
M 20x1.5
20
18.75
M 20x1.5
M 22x1.5
22
20.5
M 24x1.5
24
22.5
M 30x2
30
28.0
M 32x2
32
30.0
M 33x2
33
31.0
Other sizes are available on request.
C'SINK
DIA.
TAP
SIZE
8.25
10.25
11.25
M 8x1.25
M 10x1.25
M 11x1.0
INSERT
TOOL
PART NO.
TRKM 5
TRKM 6
TRKM 7
12.25
M 12x1.25
TRKM 8
9.50
14.25
M 14x1.5
TRKM 10
11.50
16.25
M 16x1.5
TRKM 12
13.50
20.25
M 20x1.5
TRKHM 14
17.50
22.25
24.25
30.25
32.25
33.25
M 22x1.5
M 24x1.5
M 30x2.0
M 32x2.0
M 33x2.0
TRKHM 16
TRKHM 18
TRKHM 20
TRKHM 22
TRKHM 24
17.75
19.75
25.75
27.75
28.75
DRILL
SIZE
DEPTH
5.50
7.50
8.50
4.00
4.75
6.35
Countersink diameters are optional

providing KEENSERTS insert installs
below flush of surface.
Material: C1215 Steel or equivalent.
KEENSERTS Inserts are also available under the Aerospace Industries

Association of Americas NA part numbers. NA0145 Through NA0151
can be obtained from:
National Standards Association, Inc.
5161 River Road
Washington, D.C. 20016
Tridair Products 28
SECTION
GENERAL PURPOSE STUDS
6
INDEX
KEENSERTS studs are offered in a wide variety of high performance materials to meet the
requirements of aerospace and military specifications. They are particularly suited for
high temperature, cryogenic or high loading applications.
PAGE NO.
How To Order
31
Shear Load Series

AND Standards
30
Lightweight Series
31
Heavy Duty Series

AND Standards
32
SPECIFICATIONS:
Tolerances are .010 unless otherwise specified.
Shear enagagement area dimensions (sq. in.) shown are minimums.
Studs with nut end thread size 5/16 and larger are furnished with 4 locking KEES.
If ordering nut end length equal to or shorter than nut end thread length, then nut end will be
fully threaded to within 2-1/2 pitches of shoulder.
Nut end threads are fully formed by a single rolling process subsequent to heat treatment and prior
to plating.
Drilled hole in nut end is optional on all studs except AND standard parts.
Consult home office or local sales engineer about installation tools to be used with studs having nut
end lengths greater than maximum specified for standard tools.
NOTE: Nut end threads are manufactured to MIL-S-8879 except where noted.
.182 TO .250 = -.001 + .002
.251 TO .271 = -.001 + .003
.272 TO .500 = -.001 + .004
Above .500 = -.001 + .005
Installation:
Studs are installed in the same manner
as described for inserts. However, the
installation tool for the studs has a hole
to receive the stud.
To remove a stud, simply cut off the
nut end at a point just above the
surface. A drill bushing will be required for

removal drill.
Removal is the same as for inserts. The same
size replacement stud may be installed in the
original hole. Strength of the replacement is
equal to that of the original.
Tridair Products 29
SECTION
Shear Load
Studs
6
DIMENSIONS
NUT END
PART
NO.
THREAD THREAD
SIZE LENGTH
UNJ-3A .030
KNS0632J
KNS0832J
KNS1032J
KNS1024J
KNS428J
KNS420J
KNS524J
KNS518J
KNS624J
KNS616J
KNS720J
KNS714J
KNS820J
KNS813J
6 - 32
8 - 32
10 - 32
10 - 24
1/4 - 28
1/4 - 20
5/16 - 24
5/16 - 18
3/8 - 24
3/8 - 16
7/16 - 20
7/16 - 14
1/2 - 20
1/2 - 13
.37
.41
STUD END
C'DRILL
DRILLED
THREAD
SHEAR
HOLE
SIZE
L
D
ENGAG.
DIA. UNJF-3A
.020
12 - 28 .0492 .312
1/4 - 28 .0863 .375
TAP
DRILL
DIA.
SIZE
THREAD TAP
.218
.250
.156
.156
12 - 28
1/4 - 28
.37
.44
TS 06
TS 08
1-7/16
1-7/16
.147
.189
.41
.141
.070
1/4 - 28
.1132
.437
.213
.250
.156
1/4 - 28
.50
TS 010
.189
.47
.156
.076 5/16 - 24
.2579
.625
.272
.312
.156
5/16 - 24
.68
TS 4
1/4
.53
.172
.076
3/8 - 24
.3049
.687
.332
.375
.187
3/8 - 24
.75
TS 5
2-1/2
5/16
.64
.172
.106 7/16 - 20
.4740
.750
.390
.437
.187
7/16 - 20
.81
TS 6
2-1/2
3/8
.66
.172
.106
1/2 - 20
.5416
.812
.453
.500
.187
1/2 - 20
.87
TS 7
2-1/2
7/16
.78
.172
.106 9/16 - 18
.6796
.875
.515
.562
.187
9/16 - 18
.93
TS 8
1/2
KNAS04
KNAS04X
KNAS05
KNAS06
KNAS09
KNAS10
5/32
REMOVAL
DATA
INSTALLATION DATA
STUD END
AND STANDARD THREAD THREATHREAD

SIZE
D
NL
SIZE
SHEAR
NUMBER
UNF-3A LENGT- .020 UNJF-3A ENGAG.
(REF. TYPES
MIL-S-7742 H MIN.
MIL-S-8879
ONLY)
A LL
A LL
A LL
A LL
A LL
XIV-A
XIV-B
XIV-C
A LL
A LL
A LL
A LL
1/8
STANDARD MATERIALS: Stud: Must be specified

KEES: 302 CRES
See How To Order, Page 31 for stud materials and
additional information.
NUT END
20000
20001
20003
20002
20007
20004
20004
20004
20005
20006
20009
20010
DRILL
.182
.213
DIMENSIONS
KNAS00
KNAS01
KNAS03
KNAS02
KNAS07
INSTALLATION
TOOL
DEPTH
DEPTSIZE
PART MAX. NL
DEPT+ .010
H
SIZE
C LA S S 3B
NUMBER LENGTH
H
- .000
(MIN.)
AND Standards
PART
NO.
REMOVAL
DATA
INSTALLATION DATA
C'DRILL
THREAD TAP
DRILL
INSTALDEPTL.
TAP
H
MIN.
TOOL
DRILL
+ .010
SIZE
DEPTH PART
DEPTSIZE
DIA. SIZE
-. 000 CLASS 3B FULL NUMBEH
THD.
R
1/4 - 28
.688
.875
5/16 - 24
.2579
.625
.272
.312
.156
5/16 - 24
.68
TS 4
1/4
5/16 - 24
.688
.906
3/8 - 24
.3049
.688
.332
.375
.187
3/8 - 24
.75
TS 5
5/16
3/8 - 24
.812
1.020
7/16 - 20
.4740
.750
.390
.437
.187
7/16 - 20
.81
TS 6
3/8
3/8 - 24
.812
1.020
7/16 - 20
.4740
.750
.390
.437
.187
7/16 - 20
.81
TS 6
3/8
7/16 - 20
1/4 - 28
3/8 - 24
5/16 - 24
5/16 - 24
.812
.656
.812
.688
.719
1.125
.750
1.125
.880
1.000
1/2 - 20
5/16 - 24
7/16 - 20
3/8 - 24
3/8 - 24
.5416
.2579
.4740
.3049
.3049
.812 .453
.625 .272
.750 .390
.688 .332
.688 .332
.500
.312
.437
.375
.375
.187
.156
.187
.187
.187
1/2 - 20
5/16 - 24
7/16 - 20
3/8 - 24
3/8 - 24
.87
.68
.81
.75
.75
TS
TS
TS
TS
TS
Order by part number tabulated. Add material designation only.

Nut end length and thread length are fixed.
7
4
6
5
5
5/32
7/16
1/4
3/8
5/16
5/16

KEES: 302 CRES
Tridair Products 30
SECTION
Lightweight
Studs
DIMENSIONS
NUT END
PART
NO.
KNNS1032J
KNNS1024J
KNNS428J
KNNS420J
KNNS524J
KNNS518J
KNNS624J
KNNS616J
KNNS720J
KNNS714J
KNNS820J
KNNS813J
STUD END
DRILLED
THREAD
THREAD
HOLE
SIZE
LENGTH
CLASS
D
.030
DIA.
3A
.020
10 - 32
10 - 24
1/4 - 28
1/4 - 20
5/16 - 24
5/16 - 18
3/8 - 24
3/8 - 16
7/16 - 20
7/16 - 14
1/2 - 20
1/2 - 13
REMOVAL
DATA
INSTALLATION DATA
THREAD
SIZE
SHEAR
CLASS 2A
ENGAG.
(Minor Dia.
Mod.)
THREAD TAP
C'SINK
TAP
DIA.
DRILL
.010
DIA.
- .000
INSTALLATION
TOOL
DRILL
SIZE MIN.DEPTH PART MAX. NL

SIZE DEPTH
UNC-2B FULL THD. NUMBER LENGTH
.41
.141
.070
5/16 - 18
.1517
.31
.272
.323 5/16 - 18
.37
TNS 010
2-1/2
7/32
.47
.156
.076
3/8 - 16
.2371
.37
.332
.385
3/8 - 16
.43
TNS 4
2-1/2
9/32
.53
.172
.076
7/16 - 14
.3049
.43
.397
.447 7/16 - 14
.50
TNS 5
2-1/2
11/32
.64
.172
.106
1/2 - 13
.4299
.50
.453
.510
1/2 - 13
.56
TNS 6
2-1/2
13/32
.66
.172
.106
9/16 - 12
.5665
.56
.516
.572 9/16 - 12
.62
TNS 7
2-1/2
15/32
.78
.172
.106
5/8 - 11
.7172
.62
.578
.635
.68
TNS 8
2-1/2
17/32
5/8 - 11
5/32
3/16

KEES: 302 CRES
How To Order:
This ordering code must be used to complete all part numbers tabulated in this section except the AND Standard
studs.
KNHS 428 J MX-22D SY-1.36

BASIC
HEAVY DUTY
NUT END THREAD

(In decimals if Non-Standard.)
STUD
NUT END THREAD
in 1/16 inch increments, except below
1/4 inch bolt size
Numbered screw sizes as follows:
10 - #10 screw size
08 - #8 screw size
06 - #6 screw size
NUT END THREADS PER

DESIGNATES MIL-S-8879 THREADS
ON
FINISH DESIGNATION
(Used ONLY if finish required is other than standard specified for
material designated.)
SP= Silver Plate per QQ-S-365
SX= Cad. Plate per QQ-P-416 Type I CL. 3
SY= Cad. Plate per QQ-P-416 Type II CL. 3
SZ= Cad. Plate per QQ-P-416 Type II CL. 2
DRILLED HOLE IN NUT END THREADS

NUT END LENGTH
Must be specified in 1/16 inch increments,
(Ex.: - 22 = 1-3/8 inch)
S= 303 CRES (passivated), has no identifying marks on stud
M= Chrome Moly Steel 125,00 P.S.I. MIN. identified on top of stud by two nonparallel dash marks (cad. plated per QQ-P-416 Type I CL. 3)
MX= Chrome Moly Steel 160,00 P.S.I. MIN. identified on top of stud by two
parallel marks (cad. plated per QQ-P-416 Type I CL. 3)
T= A286 CRES 140,000 P.S.I. MIN. (passivated) identified on top of stud by one
mark
TX= A286 CRES 180,000 P.S.I. MIN. (passivated) identified on top of stud by
Tridair Products 31
SECTION
Heavy Duty
Studs
6
D IMENSIONS
INSTALLATION D ATA
NUT END
STUD END
PART
NO.
THREAD
SIZE
C LA S S
3A
KNHS0832J
KNHS1032J
KNHS1024J
KNHS428J
KNHS420J
KNHS524J
KNHS518J
KNHS624J
KNHS616J
KNHS720J
KNHS714J
KNHS820J
KNHS813J
KNHS918J
KNHS912J
KNHS1018J
KNHS1011J
KNHS1216J
KNHS1210J
KNHS1414J
KNHS1409J
KNHS1612J
KNHS1608J
8 - 32
10 - 32
10 - 24
1/4 - 28
1/4 - 20
5/16 - 24
5/16 - 18
3/8 - 24
3/8 - 16
7/16 - 20
7/16 - 14
1/2 - 20
1/2 - 13
9/16 - 18
9/16 - 12
5/8 - 18
5/8 - 11
3/4 - 16
3/4 - 10
7/8 - 14
7/8 - 9
1 - 12
1-8
THREAD
LENGTH
.030
D RILLED
HOLE
D
.020
D IA.
THREAD
SIZE
C LA S S 2A
(Mi nor D i a.
Mod.)
SHEAR
ENGAG.
THREAD TAP
TAP
D RILL
D IA.
C 'SINK
D IA.
.010
- .000
MIN.
SIZE
D EPTH
C LASS 2B FULL
THD .
KNHAS04
KNHAS04X
KNHAS05
KNHAS06
KNHAS09
KNHAS10
MAX. NL
LENGTH
SIZE
D EPTH
5/16 - 18
.1517
.31
.272
.323 5/16 - 18
.37
THS 08
1-7/16
7/32
.141
.070
3/8 - 16
.1901
.31
.332
.385
.37
THS 010
1-1/2
9/32
.47
.156
.076
7/16 - 14
.2842
.37
.397
.447 7/16 - 14
.43
THS 4
11/32
.53
.172
.076
1/2 - 13
.3588
.43
.453
.510
.50
THS 5
2-1/2
13/32
.64
.172
.106
9/16 - 12
.4975
.50
.516
.572 9/16 - 12
.56
THS 6
2-1/2
15/32
.66
.172
.106
5/8 - 11
.7172
.62
.578
.635
5/8 - 11
.68
THS 7
2-1/2
17/32
.78
.172
.106
11/16 - 11
NS
.8864
.68
.641
.700
11/16 - 11
NS
.75
THS 8
19/32
3/8 - 16
1/2 - 13
.91
.22
.141 13/16 - 16
1.2493
.81
.766
.822 13/16 - 16
.95
.22
.141
1.4866
.87
.828
.885
1.09
.22
.141 1-1/8 - 12
2.4901
1.12
1.062
1.25
.27
.141 1-1/4 - 12
3.1370
1.25
1.37
.28
.141 1-3/8 - 12
3.8381
1.37
7/8 - 14
.94
THS 9
23/32
THS 10
25/32
1.145 1-1/8 - 12
1.31
THS 12
31/32
1.187
1.270 1-1/4 - 12
1.44
THS 14
1-3/32
1.312
1.395 1-3/8 - 12
1.56
THS 16
1-7/32
STUD END
THREAD TAP
C'SINTAP
K
DRILL DIA.
SIZE
DIA. + .010
-. 000 UNC-2B
DRILL
INSTALL.
TOOL
MIN.
DEPTH PART
DEPTSIZE
FULL NUMBER
H
THREAD
1/4 - 28
.688
.875
7/16 - 14
.2842
.37
.397
.447
7/16 - 14
.41
THS 4
11/32
5/16 - 24
.688
.906
1/2 - 13
.3588
.43
.453
.510
1/2 - 13
.50
THS 5
13/32
3/8 - 24
.812
1.020
9/16 - 12
.4975
.50
.516
.572
9/16 - 12
.56
THS 6
15/32
3/8 - 24
.812
1.020
9/16 - 12
.4975
.50
.516
.572
9/16 - 12
.56
THS 6
15/32
7/16 - 20
1/4 - 28
3/8 - 24
5/16 - 24
5/16 - 24
.812
.656
.812
.688
.719
1.125
.750
1.125
.880
1.000
5/8 - 11
7/16 - 14
9/16 - 12
1/2 - 13
1/2 - 13
.7175
.2842
.4975
.3588
.3588
.62
.37
.50
.43
.43
.578
.397
.516
.453
.453
.635
.447
.572
.510
.510
5/8 - 11
7/16 - 14
9/16 - 12
1/2 - 13
1/2 - 13
.68
.41
.56
.50
.50
THS
THS
THS
THS
THS
17/32
11/32
15/32
13/32
13/32

KEES: 302 CRES
5/16
REMOVAL
DATA
INSTALLATION DATA
THREAD
THREAD
SIZE
THREAD
SIZE
NL CLASS 2A SHEAR
LENGTH
NUMBER
UNF-3A
.020 (Minor Dia ENGAG.
MIN.
(REF.
TYPES MIL-S-7742
Mod.)
ONLY)
MIL-S-7742
3/16

AND STANDARD
A LL
A LL
A LL
A LL
A LL
XIV-A
XIV-B
XIV-C
A LL
A LL
A LL
A LL
1/8
1.00
7/8 - 14

KEES: 302 CRES
NUT END
20000
20001
20003
20002
20007
20004
20004
20004
20005
20006
20009
20010
PART
NUMBER
D RILL
.41
DIMENSIONS
KNHAS00
KNHAS01
KNHAS03
KNHAS02
KNHAS07
INSTALLATION TOOL
.41
AND Standards
PART
NO.
REMOVAL D ATA
7
4
6
5
5
3/16
Order by part number tabulated. Add material designation only.

Nut end length and thread length are fixed.
Tridair Products 32
SECTION
METRIC STUDS
7
SPECIFICATIONS:
INDEX

If ordering nut end length equal to or shorter than nut end thread length,
then nut end will be fully threaded to within 2 1/2 pitches of shoulder.
PAGE NO.
How To Order
33
Shear Load Series
34
Lightweight Series
34
Heavy Duty Series
35
Studs with nut end thread sizes M8.0 and above furnished with 4 locking KEES.
Tolerances are .25 unless otherwise specified.
Dimensions are in millimeters.
NOTE: Nut end threads are manufactured to I.S.O. stds.
4.0 TO 12.70 = -.025 + .100
Above 12.70 = -.025 + .130
How To Order:
Ordering by part number tabulated. Add material designation only. Nut end length and thread length are fixed.
KEES: 302 corrosion resistant steel.
Dimensions are in millimeters. Shear Engagement Area in MM2.
KNHMS 12x1.5 S-30 D-SP-20

BASIC SERIES
HEAVY DUTY SERIES
METRIC
STUD
NUT END THREAD
DIAMETER IN MILLIMETERS
NUT END THREAD
PITCH IN MILLIMETERS
NUT END THREAD LENGTH

(In millimeters if non-standard.)
FINISH DESIGNATION
(Used ONLY if finish required is other than standard specified for material
designated.)
SP= Silver Plate per QQ-S-365
SX= Cad. Plate per QQ-P-416 Type I CL. 3
SY= Cad. Plate per QQ-P-416 Type II CL. 3
SZ= Cad. Plate per QQ-P-416 Type II CL. 2
DRILLED HOLE IN NUT END THREADS OPTIONAL

(Add D here if required.)
NUT END LENGTH

In millimeter increments. (Ex.: - 40 = 40 millimeters)
S= 303 CRES (passivated), has no identifying marks on stud
M= Chrome Moly Steel 125,00 P.S.I. MIN. identified on top of stud by two non-parallel
dash marks (cad. plated per QQ-P-416 Type I CL. 3)
MX= Chrome Moly Steel 160,00 P.S.I. MIN. identified on top of stud by two parallel
marks (cad. plated per QQ-P-416 Type I CL. 3)
T= A286 CRES 140,000 P.S.I. MIN. (passivated) identified on top of stud by one mark
TX= A286 CRES 180,000 P.S.I. MIN. (passivated) identified on top of stud by H
BR= Bronze, completely non-magnetic stud (cad. plated per QQ-P-416 Type II CL. 3)
Tridair Products 33
SECTION
Shear Load
Studs
7
NUT END
PART
NO.
KNMS 3.5 x 0.6

KNMS 4 x 0.7
KNMS 5 x 0.8
KNMS 5 x 0.5
KNMS 6 x 1.0
KNMS 6 x 0.75
KNMS 8 x 1.25
KNMS 8 x 1.0
KNMS 10 x 1.5
KNMS 10 x 1.25
KNMS 12 x 1.75
KNMS 12 x 1.25
THREAD THREAD
SIZE
LENGTH
CLASS 4h .075
M 3.5 x 0.6
M 4 x 0.7
M 5 x 0.8
M 5 x 0.5
M 6 x 1.0
M 6 x 0.75
M 8 x 1.25
M 8 x 1.0
M 10 x 1.5
M 10 x 1.25
M 12 x 1.75
M 12 x 1.25
9.4
10.4
10.4
10.4
11.9
11.9
13.5
13.5
16.3
16.3
19.8
19.8
STUD END
C'DRILL
DRILLED
HOLE
DIA.
3.5
3.5
4.0
4.0
4.4
4.4
4.4
4.4
4.4
4.4
1.8
1.8
2.0
2.0
2.0
2.0
2.7
2.7
2.7
2.7
TAP
THREAD
SHEAR
L
SIZE
DRILL
ENGAG. 0.75
C LA S S 4h
SIZE
M 5 x 0.5
M 6 x 0.75
M 7 x 0.75
M 7 x 0.75
M 8 x 1.0
M 8 x 1.0
M 10 x 1.25
M 10 x 1.25
M 12 x 1.25
M 12 x 1.25
M 14 x 1.5
M 14 x 1.5
29.2
50.7
81.3
81.3
108.1
108.1
198.7
198.7
293.1
293.1
432.3
432.3
REMOVAL
DATA
INSTALLATION
8.0
9.5
11.0
11.0
16.0
16.0
17.0
17.0
19.0
19.0
22.0
22.0
4.5
5.2
6.2
6.2
7.0
7.0
8.7
8.7
10.7
10.7
12.5
12.5
INSTALLATION
TOOL
THREAD TAP
SIZE
DEPTH
+ 0.25
- 0.00
SIZE
DEPTH
5.0
6.0
7.0
7.0
8.0
8.0
10.0
10.0
12.0
12.0
14.0
14.0
4.0
4.0
4.0
4.0
4.0
4.0
4.8
4.8
4.8
4.8
4.8
4.8
M 5 x 0.5
M 6 x 0.75
M 7 x 0.75
M 7 x 0.75
M 8 x 1.0
M 8 x 1.0
M 10 x 1.25
M 10 x 1.25
M 12 x 1.25
M 12 x 1.25
M 14 x 1.5
M 14 x 1.5
9.5
11.0
12.5
12.5
17.5
17.5
18.5
18.5
20.5
20.5
23.5
23.5
DRILL
MAX.
NL
LENGTH
TMS 3.5
36
TMS 4
36
TMS 5
50
TMS 5
50
TMS 6
50
TMS 6
50
TMS 8
63
TMS 8
63
TMS 10
63
TMS 10
63
TMS 12
76
TMS 12
76
PART
NO.
SIZE
DEPTH
3.4
4.4
5.4
5.4
6.4
6.4
8.4
8.4
10.4
10.4
12.4
12.4
3.2
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0

KEES: 302 CRES
Lightweight
Studs
NUT END
PART
NO.
KNNMS 5 x 0.8
KNNMS 6 x 1.0
KNNMS 8 x 1.25
KNNMS 8 x 1.0
KNNMS 10 x 1.5
KNNMS 10 x 1.25
KNNMS 12 x 1.75
KNNMS 12 x 1.25
THREAD THREAD
SIZE
LENGTH
CLASS 4h
.075
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 8 x 1.0
M 10 x 1.5
M 10 x 1.25
M 12 x 1.75
M 12 x 1.25
10.4
11.9
13.5
13.5
16.3
16.3
19.8
19.8
STUD END
DRILLED
HOLE
DIA.
3.5
3.9
4.0
4.0
4.4
4.4
4.4
4.4
1.8
2.0
2.0
2.0
2.7
2.7
2.7
2.7
THREAD
SIZE
CLASS 4h
M 8 x 1.25
M 10 x 1.25
M 12 x 1.25
M 12 x 1.25
M 14 x 1.5
M 14 x 1.5
M 16 x 1.5
M 16 x 1.5
C'SINK
TAP
SHEAR
L
DIA.
DRILL
ENGAG. 0.75
+ 0.25
SIZE
- 0.00
104.9
177.7
266.7
266.7
341.6
341.6
470.2
470.2
REMOVAL
DATA
INSTALLATION
8.0
10.0
12.0
12.0
14.0
14.0
16.0
16.0
6.9
8.8
10.8
10.8
12.8
12.8
14.75
14.75
8.25
10.25
12.25
12.25
14.25
14.25
16.25
16.25
THREAD TAP
MIN.
SIZE
DEPTH
CLASS 5H FULL
THD.
M 8 x 1.25
9.5
M 10 x 1.25 11.5
M 12 x 1.25 13.5
M 12 x 1.25 13.5
M 14 x 1.5
15.5
M 14 x 1.5
15.5
M 16 x 1.5
17.5
M 16 x 1.5
17.5
INSTALLATION
TOOL
PART
NO.
TNMS 5
TNMS 6
TNMS 8
TNMS 8
TNMS 10
TNMS 10
TNMS 12
TNMS 12
DRILL
MAX.
SIZE
NL
DEPTH
LENGTH
50
50
63
63
63
63
76
76
5.50
7.50
9.50
9.50
11.50
11.50
13.50
13.50
4.0
4.7
4.75
4.75
4.75
4.75
4.75
4.75

KEES: 302 CRES
Tridair Products 34
SECTION
Heavy Duty
Studs
7
S TU D E N D
NUT END
PART
NO.
THREAD THREAD
SIZE
LENGTH
C LA S S 4h
.075
KNHMS 4 x 0.7
M 4 x 0.7
KNHMS 5 x 0.8
M 5 x 0.8
KNHMS 6 x 1.0
M 6 x 1.0
KNHMS 8 x 1.25 M 8 x 1.25
KNHMS 8 x 1.0
M 8 x 1.0
KNHMS 10 x 1.5 M 10 x 1.5
KNHMS 10 x 1.25 M 10 x 1.25
KNHMS 12 x 1.75 M 12 x 1.75
KNHMS 12 x 1.5
M 12 x 1.5
KNHMS 12 x 1.25 M 12 x 1.25
KNHMS 14 x 2.0
M 14 x 2.0
KNHMS 14 x 1.5
M 14 x 1.5
KNHMS 16 x 2.0
M 16 x 2.0
KNHMS16 x 1.5
M 16 x 1.5
KNHMS 18 x 1.5
M 18 x 1.5
KNHMS 20 x 2.5
M 20 x 2.5
KNHMS 20 x 1.5 M 20 x 1.5
KNHMS 22 x 1.5
M 22 x 1.5
KNHMS 24 x 3.0
M 24 x 3.0
KNHMS 24 x 2.0
M 24 x 2.0
10.5
11.0
12.0
14.0
14.0
16.0
16.0
20.0
20.0
20.0
24.0
24.0
26.0
26.0
28.0
30.0
30.0
32.0
34.0
34.0
DRILLED
HOLE
DIA.
3.5
4.0
4.6
4.6
5.2
5.2
5.6
5.6
5.6
5.6
5.6
5.6
5.6
5.6
5.6
5.6
6.8
7.2
7.2
1.8
2.0
2.0
2.0
2.7
2.7
2.7
2.7
2.7
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
THREAD TAP
C'SINK
THREAD
TAP
SHEAR
L
DIA.
SIZE
DRILL
ENGAG. 0.75
+ 0.25
C LA S S 4h
SIZE
- 0.00
M 8 x 1.25
M 10 x 1.25
M 12 x 1.25
M 14 x 1.5
M 14 x 1.5
M 16 x 1.5
M 16 x 1.5
M 18 x 1.5
M 18 x 1.5
M 18 x 1.5
M 20 x 1.5
M 20 x 1.5
M 22 x 1.5
M 22 x 1.5
M 24 x 1.5
M 30 x 2.0
M 30 x 2.0
M 32 x 2.0
M 33 x 2.0
M 33 x 2.0
104.9
177.7
266.7
341.6
341.6
470.2
470.2
608.5
608.5
608.5
770.5
770.5
896.8
896.8
1084.4
1774.3
1774.3
2045.9
2189.4
2189.4
REMOVAL
DATA
INSTALLATION
8.0
10.0
12.0
14.0
14.0
16.0
16.0
18.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
30.0
30.0
32.0
33.0
33.0
6.9
8.8
10.8
12.8
12.8
14.75
14.75
16.75
16.75
26.75
18.75
18.75
20.5
20.5
22.5
28.0
28.0
30.0
31.0
31.0
8.25
10.25
12.25
14.25
14.25
16.25
16.25
18.25
18.25
18.25
20.25
20.25
22.25
22.25
24.25
30.25
30.25
32.25
33.0
33.0
INSTALLATION
TOOL
DRILL
MIN.
MAX.
DEPTPART
NL
SIZE
H
DEPTH
NO.
LENGTFULL
H
THD.
M 8 x 1.25
9.5 THMS 4
36
5.50 4.00
M 10 x 1.25 12.5 THMS 5
50
7.50
4.75
M 12 x 1.25 14.5 THMS 6
50
9.50 4.75
M 14 x 1.5
16.5 THMS 8
63
11.50 4.75
M 14 x 1.5
16.5 THMS 8
63
11.50 4.75
M 16 x 1.5
18.5 THMS 10
63
13.50 4.75
M 16 x 1.5
18.5 THMS 10
63
13.50 4.75
M 18 x 1.5
20.5 THMS 12
76
15.50 4.75
M 18 x 1.5
20.5 THMS 12
76
15.50 4.75
M 18 x 1.5
20.5 THMS 12
76
15.50 4.75
M 20 x 1.5
22.5 THMS 14
76
17.50 4.75
M 20 x 1.5
22.5 THMS 14
76
17.50 4.75
M 22 x 1.5
24.5 THMS 16
76
17.75 4.75
M 22 x 1.5
24.5 THMS 16
76
17.75 4.75
M 24 x 1.5
26.5 THMS 18
76
19.75 4.75
M 30 x 2.0
34.5 THMS 20
76
25.50 6.35
M 30 x 2.0
34.5 THMS 20
76
25.50 6.35
M 32 x 2.0
36.5 THMS 22
76
27.50 6.35
M 33 x 2.0
37.5 THMS 24
76
28.50 6.35
M 33 x 2.0
37.5 THMS 24
76
28.50 6.35
SIZE
C LA S S 5h

KEES: 302 CRES
Tridair Products 35
SECTION
Self-Broaching
KEENSERTS Inserts and Studs.
Design and Features

Rexnord Specialty Fastener Division pioneered the
design of permanent, wear-resistant, threaded inserts
and studs which feature a positive mechanical lock
against rotation. The high-performance, self-broaching
KEENSERTS inserts and studs shown in this catalog are
designed to dramatically reduce time and labor required
for installation into hard or tough aerospace parent
materials. Precision-treated 400 series corrosion
resistant steel locking KEES self-broach into parent
materials, eliminationg broaching tools, saving time, labor
and considerable costs.
Standard KEENSERTS inserts and studs install easily
into soft materials, such as magnesium and aluminum.
The KEE self-broaches these materials, thus providing
a positive lock against rotation. However, hard or
tough materials such as 17-4 PH CRES, INCO718 or
titanium require an additional installation step of
broaching the keeways using a broaching tool. This
prebroaching procedure is time-consuming,
expensive and sometimes frustrating.
Self-broaching KEENSERTS inserts and studs feature
a KEE configuration and material that broaches hard
parent materials which previously required the
prebroaching step. The result is a fast, efficient
method for installing inserts or studs in parent materials
with a Rockwell hardness in excess of Rc 40.
The pre-positioned KEES automatically set the insert or

stud at the proper depth below the surface of the parent
material. Unlike conventional inserts, there is no need to
maintain critical depth tolerances, and no chance of
inadequate locking or deformantion of internal threads
due to miscalculations of depth.
Features:
*Positive mechanical lock against rotation.
*Hole prepared with standard taps and drills.

*Installs in seconds with Tridair power installation tool.
*Available in many sizes in heavy duty and extra heavy
duty configuration.
*Meets the following configuration specifications:
MS51831, MS51832, MS51833, MS51834 series.
*Internal thread locking feature meets the requirements
of MIL-I-45914.
*Exclusive external thread design provides maximum
pull-out strength with a minimum outside diameter.
Specifications subject to change without notice. Copyright, Rexnord Inc., Specialty Fastener Division, 1985
Tridair Products 36
SECTION
Installation Comparison in Hard Materials.

Time saved using self-broaching KEENSERTS Inserts and Studs has been estimated at upwards of
7 minutes per individual installation.
Self-Broaching KEENSERTS Inserts and Studs
Standard Version
Six simple steps
Fourteen steps
1. Drill with a standard drill.

2. Countersink with a standard counterisnk (82 to 100).
3. Tap with a standard unified thread series tap.
4. Insert insert or stud.
5. Mark KEE location.
6. Remove insert or stud.
7. Cut keeways using broaching tool.
8. Remove chips with tap.
9. Blow out chips.
10. Screw in insert or stud.
11. Align KEES to keeways.
12. Drive KEES.
13. Remove installation tool.
14. Replace blades in broaching tool as required (one to
three cuts per blade in INCO718 material is common).
1. Drill with a standard drill.

2. Countersink with a standard counterisnk (82 to 100).
3. Tap with a standard unified thread series tap.
4. Screw in insert or stud using 70950-6 power tool.
5. Drive KEES.
6. Remove installation tool.
Removal
(If removal is necessary follow these simple steps.)
Inserts
Studs
To remove a stud, simply cut off the nut end at a point just
above the surface.
Removal is the same as for inserts, except a drill bushing will be
required to align removal drill. The same size replacement stud
may be installed in the original hole. Strength o fthe replacement
is equal to that of the original.
1. Use standard drill to remove insert material between KEES.

2. Deflect KEES inward and break off.
3. Remove insert with E-Z out type tool.
4. An identical insert can now be installed in the original hole. No
re-work of the hole will be necessary.
Special Note:
Catalog values for shear engagement areas are based on
shear failure in the parent material when the parent material
is significantly weaker than the insert or stud. Such failure
occurs in the parent material at or near the major diameter of
the insert or stud. For parent materials of hardness similar to
that of the insert or stud, failure occurs by combined shear of

both materials simultaneously and will occur along a surface
approaching the pitch line. The calculated shear engagement
area should be reduced accordingly. For sufficienly hard parent
materials, failure may occur by thread shear at the internal
thread of the insert or by stud nut end thread failure.
Tridair Products 37
SECTION
Self-Broaching
Standard Self-Broaching Stud. TR28000 ( ) Series.
D a sh
Number
A
Nut End
Thread Size
UNJF-3A
B
Stud End Thread
Modified Minor Dia.
Shear Engagement
Area Min. *
C
.030
D
D i a.
E
.015
.1517
.410
.189
.185
.312
.060
.030
.141
.070
.220
H
.020
J
K
Dia. .004
.010
Size
Size
201
.1900 - 32
.3125 - 18
UNC-2A
Minor
D i a.
.256
.249
202
.2500 - 28
.3750 - 16
UNC-2A
.320
.312
.2371
.470
.249
.245
.375
.060
.030
.156
.076
.284
203
.3125 - 24
.4375 - 14
UNC-2A
.383
.375
.3049
.530
.312
.308
.437
.060
.030
.172
.076
.345
204
.3750 - 24
.5000 - 13
UNC-2A
.440
.432
.4299
.640
.374
.370
.500
.060
.030
.172
.106
.407
Material:
Stud:
4140 alloy steel per MIL-S-5626.
A-286 corrosion resistant steel per AMS5731 capable of
AMS5732, AMS5734, and AMS5737.
Locking KEES:
400 series corrosion resistant steel per QQ-S-763 chemistry only.
Finish:
Alloy steel, cadmium plated per QQ-P-416, type II, class 3.
Corrosion resistant steel, passivated per QQ-P-35.
Threads:
a. Nut end threads conform to MIL-S-8879.
b. Stud end threads conform to handbook H-28 except minor diameters
are modified as specified herein.
Notes:
1. All dimensions are after protective coating or treatment.
2. See pages 9 and 10 for hole preparation and installation
information.
3. Install stud using 70950-6 power unit and proper nose
assembly (see page 8).
4. Grip diameter concentric to pitch diameter of stud end
thread within .006 T.I.R.
5. Studs are supplied with two (2) locking KEES for dash
numbers 201 and 202; four (4) locking KEES for dash
numbers 203 and 204.
6. Marking:
a. 4140 alloy steel identified on top of stud by two
parallel dash marks.
b. A-286 corrosion resistant steel identified on top of
stud by one dash mark.
Heat Treatment:
4140 alloy steel studs heat treated in accordance with MIL-H-6875 to
160,000 PSI FTU minimum.
A-286 corrosion resitant steel studs heat treated to 140,000 PSI FTU
minimum.
Locking KEES heat treated to Rc 48 minimum.
Tridair Products 38
SECTION
Standard Self-Broaching Stud. TR28000 ( ) Series.
How to Order:
Part Number Example:
TR28000203D24
1.500 inch length of nut end
Drilled hole in nut end. Use dash in lieu of D if
drilled hole not required.
.3125 - 24 nut end thread and .4375 - 14 stud end thread
Material: 4140 alloy steel. Add A in lieu of dash for A-286 CRES
Stud, Self-Broaching, Standard
Dash Number
2.000
1.938
1.875
1.812
1.750
1.688
1.625
1.562
1.500
32
31
30
29
28
27
26
25
24
32
31
30
29
28
27
26
25
24
32
31
30
29
28
27
26
25
24
32
31
30
29
28
27
26
25
24
1.438
1.375
1.312
1.250
1.188
23
22
21
20
19
23
22
21
20
19
23
22
21
20
19
23
22
21
20
19
18
17
16
15
14
18
17
16
15
14
18
17
16
15
14
18
17
16
15
14
L
Nut end
.030
Nominal Diameter
.1900
.2500
.3125
.3750
.375
.438
.500
6
7
8
6
7
8
.562
.625
.688
.750
.812
9
10
11
12
13
9
10
11
12
13
9
10
10
11
11
12
13
12
13
Dash numbered parts above the heavy line are threaded to the stud
end as specified herein. The maximum distance from the stud end to
the first full thread shall be equal to the sum of the maximum fillet
radius and a maximum of two incomplete threads. Incompleted threads
not to enter fillet area.
Tridair Products 39
SECTION
Self-Broaching
Heavy Duty Self-Broaching Inserts. TR29000 ( ) Series.
D a sh
Number
A
Internal
Thread UNJF-3B
Minor
D i a.
.1675
.1596
.3750 - 16
UNC-2A
Minor
D i a.
.320
.312
.2500 - 28
.2229
.2152
.4375 - 14
UNC-2A
.383
.375
.3125 - 24
.2799
.2719
.5000 - 13
UNC-2A
.440
.432
.3750 - 24
.3418
.3344
.5625 - 12
UNC-2A
.503
.495
Size
201
201L
202
202L
203
203L
204
204L
B
External Thread
Modified Minor Dia.
.1900 - 32
Size
Shear Engagement
Area Min. *
Material:
Insert:
4140 alloy steel per MIL-S-5626.
A-286 corrosion resistant steel per AMS5731 capable of
AMS5732, AMS5734, and AMS5737.
Locking KEES:
400 series corrosion resistant steel per QQ-S-763 chemistry only.
Finish:
Alloy steel, cadmium plated per QQ-P-416, type II, class 3.
Corrosion resistant steel, passivated per QQ-P-35.
Lubrication:
Dry film lube per MIL-L-8937.
Threads:
Internal threads conform to MIL-S-8879. External threads conform to
FED-STD-H28 except minor diameters are modified as specified herein.
Heat Treatment:
Alloy steel inserts are heat treated in accordance with MIL-H-6875 to
160,000 PSI FTU minimum.
A-286 corrosion resistant steel inserts heat treated to 140,000 PSI FTU
minimum.
.1901
.1156
.2842
.1970
.3588
.2608
.4975
.3843
C
Dia
.005
D
.010
.196
L
.015
T
.030
.070
.288
.280
.312
.220
.257
.070
.348
.341
.375
.220
.316
.070
.411
.403
.437
.220
.380
.070
.473
.465
.500
.220
Notes:
1. All dimensions are after protective coating or treatment.
2. See pages 9 and 10 for hole preparation and installation
information.
3. Install insert stud using 70950-6 power unit and proper
nose assembly (see page 8).
4. Distance to center of internal thread locking device.
5. Inserts are supplied with two (2) locking KEES for dash
numbers 201(L) and 202(L); four (4) locking KEES for dash
numbers 203(L) and 204(L).
6. Marking:
a. 4140 alloy steel identified on top of insert by two
parallel dash marks.
b. A-286 corrosion resistant steel identified on top of
stud by one dash mark.
How to Order:
Part Number Example:
TR29000 CA 202 L
Add L as suffix for internal thread
lock. Leave blank for non-locking
part.
.2500 - 28 internal thread
.4375 - 14 external thread
Material: A-286 corrosion resistant steel.
Add A in lieu of CA for 4140 alloy steel.
Insert, Self-Broaching, Heavy Duty
Tridair Products 40
SECTION
8
Stud
Part No.
TR28000-201-( )
TR28000-201-( )
TR28000-202-( )
TR28000A202-( )
TR28000-203-( )
TR28000A203-( )
TR28000-204-( )
TR28000A204-( )
TR28001-202-( )
TR28001A202-( )
TR28001-203-( )
TR28001A203-( )
TR28001-207-( )
TR28001A204-( )
TR28001-205-( )
TR28001A205-( )
Installation Tool
Part No. **
Basic
Pow er Unit
Part No. **
Nose Assembly
Part No. **
70950-6-1-201-(*)
70950-6
70945SBK-201-(*)
70950-6-1-202-(*)
70950-6
70945SBK-202-(*)
70950-6-1-203-(*)
70950-6
70945SBK-203-(*)
70950-6-1-204-(*)
70950-6
70945SBK-204-(*)
70950-6-1-202-(*)H
70950-6
70945SBK-202- (*)H
70950-6-1-203-(*)H
70950-6
70945SBK-203- (*)H
70950-6-1-204-(*)H
70950-6
70945SBK-204- (*)H
70950-6-1-205-(*)H
70950-6
70945SBK-205- (*)H
Tapped Hole
Thread Size
(Ref.)
.3125 - 18 UNC-2B Modified
Tap Drill .272
Tap Drill .332
Tap Drill .397
Tap Drill .453
Tap Drill .332
Tap Drill .397
Tap Drill .453
Tap Drill .516
*Enter stud end length dash number. Example: stud part no. TR28001-203-24 requires installation tool part no. 70950-6-1-203-24H which is composed of the 70950-6 basic power unit and a
70945SBK-203-24H nose assembly. Power unit or nose assemblies may be procured separately.
Insert
Part No.
TR29000A201
TR29000A201L
TR29000CA201
TR29000CA201L
TR29000A202
TR29000A202L
TR29000CA202
TR29000CA202L
TR29000A203
TR29000A203L
TR29000CA203
TR29000CA203L
TR29000A204
TR29000A204L
TR29000CA204
TR29000CA204L
Installation Tool
Part No. **
Basic
Pow er Unit
Part No. **
Nose Assembly
Part No. **
Tapped Hole
Thread Size
(Ref.)
70950-6-0-201H
70950-6
70947SBK-201H
.3750 - 16 UNC-2B
Modified
Tap Drill .332
70950-6-0-202H
70950-6
70947SBK-202H
.4375 - 14 UNC-2B
Modified
Tap Drill .397
70950-6-0-203H
70950-6
70947SBK-203H
.5000 - 13 UNC-2B
Modified
Tap Drill .453
70950-6-0-204H
70950-6
70947SBK-204H
.5625 - 12 UNC-2B
Modified
Tap Drill .516
**Basic power unit part no. 70950-6 can utilize any of the nose assembly part numbers listed. To install more than one size insert or stud, order only one power unit with as many nose
assemblies as required.
Tridair Products 41
SECTION
Self-Broaching
Hole Preparation, Installation and Removal Data.
Notes:
1. Locate and drill with standard drill to A Dia.
2. Countersink with standard countersink (82 to 100),
to B Dia.
3. Tap with a standard unified thread series tap T
dimension.
Description
Standard
SelfBroaching
Studs
Heavy Duty
SelfBroaching
Studs
Heavy Duty
SelfBroaching
Inserts
Part No. *
A
Tap Drill
Dia.
B
C'Sink Dia.
+ .010
- .000
Removal Data
T
Thread Tap
Siz e
UNC-2B
C
Min. Full
Thread
Drill Ref.
Size
Depth
70950-6-1-201- (**
.2187
.1562
.43
70950-6-1-202- (**)
.2812
.4375 - 14
.50
70950-6-1-203- (**)
.3437
.510
.5000 - 13
.56
70950-6-1-204- (**)
.4062
.332
.385
.3750 - 16
.37
70950-6-1-202- (**)H
.2812
.397
.447
.4375 - 14
.43
70950-6-1-203- (**)H
.3437
.453
.510
.5000 - 13
.50
70950-6-1-204- (**)H
.4062
.516
.572
.5625 - 12
.56
70950-6-1-205- (**)H
.4687
.332
.385
.3750 - 16
70950-6-0-201H
.2812
70950-6-0-202H
.3437
70950-6-0-203H
.4062
70950-6-0-204H
.4687
TR28000-201-(*)
TR28000A201-(*)
.272
.323
.3125 - 18
.37
TR28000-202-(*)
TR28000A202-(*)
.332
.385
.3750 - 16
TR28000-203-(*)
TR28000A203-(*)
.397
.447
.453
TR28000-204-(*)
TR28000A204-(*)
TR28001-202-(*)
TR28001A202-(*)
TR28001-203-(*)
TR28001A203-(*)
TR28001-204-(*)
TR28001A204-(*)
TR28001-205-(*)
TR28001A205-(*)
TR29000A201
TR29000CA201
TR29000A201L
TR29000CA201L
TR29000A202
TR29000CA202
TR29000A202L
TR29000CA202L
TR29000A203
TR29000CA203
TR29000A203L
TR29000CA203L
TR29000A204
TR29000CA204
TR29000A204L
TR29000CA204L
Power
Installation Tool
Part No. **
.1875
.43
.37
.50
.397
.447
.4375 - 14
.43
.56
.453
.510
.5000 - 13
.50
.62
.516
.572
.5625 - 12
.56
* See ordering information on page 39 for proper stud dash number selection.
** See power tool page 41 for proper dash number selection as required for studs.
Tridair Products 42
7. Back the tool out by first depressing the Reverse

Button and then the Air Supply Lever. Release the button
after the tool is out. The tool is now ready to be loaded
for the next installation.
Installation of Inserts and Studs
Notes (Continued):
4. Start the tool by depressing the Air Supply Lever. This will
rotate the threaded mandrel in a clockwise direction. Place the
top end of the KEENSERT against the rotating mandrel and
thread it on.
SECTION
Hole Preparation, Installation and Removal Data (contd.).
8. Tool Inlet Pressure

The 70950-6 power tool has automatically installed selfbroaching KEENSERT inserts and studs into materials such as A286, Inconeli 718, Hastoloy X, 17-4 PH and titanium.
Since the 420 CRES KEE acts as a cutting tool, each application
using thr self-broaching KEENSERT should allow for some test
samples of the material used in production to determine actual
minimum pressure required.
TYPICAL PRESSURE SETTINGS REQUIRED:
Rc HARDNESS
PRESSURE TO 70950-6 TOOL
to 26.6
26.6 to 34.3
34.3 to 43.1
90-100 PSI
100-125 PSI
125-150 PSI
WARNING: DO NOT SET PRESSURE ABOVE 150 PSI

5. With the loaded tool rotating clockwise (Air Supply Lever
depressed), place the KEENSERT against the threaded hole in
the part and allow it to screw in. Take care to align the tool with
the axis of the hole. When the insert is at the correct depth the
shoulder on the nosepiece will contact the part and stall the
tool. Remove hand from Air Supply Lever.
6. Drive KEES to .030

.010 depth by pushing KEE Drive Button (figure
3).
9. Axis of hole to be normal to entry surface or provide spotface

when required.
Removal
(if required follow these simple steps):
Inserts:
1. Use standard drill to remove insert material between KEES

(see table opposite page).
4. An identical insert can be installed in the original hole. No rework of the hole is necessary. Strength of the replacement is
equal to that of the original.
Studs:
5. To remove stud, simply cut off nut end at a point just above the
surface.
6. Removal is the same as for inserts, except a drill bushing is
required to align removal drill. The same size replacement stud
may be installed in the original hole. Strength of the replacement
is equal to that of the original.
Tridair Products 43
SECTION
8
THIS PAGE INTENTIONALLY LEFT BLANK
Tridair Products 44
Page No.
Description/Installation/
Removal
45-46
Thinwall Insert Kits
47
Thinwall Bulk Inserts
48
Metric Insert Kits
47
Metric Bulk Inserts
48
Heavy Duty Insert Kits
49
Heavy Duty Bulk Inserts
50
Master Insert Kits
51
Spark Plug Master Kits
52
Spark Plug Bulk Inserts
52
53
Test Data RKK Series
Test Data RKKA Series
54
SECTION
INDEX
KEENSERTS
INSERTS
strong,
permanent,
metal threads
National Coarse, National Fine or Metric Threads.

Available in kits or in bulk quantities. Kits are particularly
suited for use by repair facilities. Individual kits are available
containing inserts of one size per box or as master kits
containing a selection of various size inserts in one package.
These kits provide convenient storage and easy access to
inserts and tools. Included in each kit are installation tools
for driving Kees as well as complete instructions for
installation or removal of the KEENSERTS. Refills for each
kit may be ordered simply and easily so that an appropriate
stock may be maintained at all times. Bulk inserts may also
be ordered.
KIT DESCRIPTIONS
THINWALL INSERT KITS. The
most versatile series in this
catalog, these kits may be used
for the majority of applications.
METRIC INSERT KITS. Contain inserts with external and
internal metric threads.
HEAVY DUTY INSERT KITS.
For applications requiring higher
pullout strengths or thread sizes
exceeding 1/2.
MASTER INSERT KITS. Contains various sizes of inserts and
tools in one package.
SPARK PLUG MASTER KITS.
Used in the repair or modification of spark plug threads in
cylinder heads.
VOLKSWAGEN STUD INSERT
KIT. Used to replace damaged
engine stud holes in VW crankcase assemblies.
FEATURES
Installed with standard drills and taps.
No pre-winder tool required.
No tang break-off.
May be used in virtually any material. . .aluminum,
magnesium, cast iron, cold rolled steel and plastic.
Provide high strength and reliability. Onelength per
size provides maximum pullout strength.
Easy to remove.
No special skills required. Installation procedures
can be learned in minutes.
TYPICAL APPLICATIONS
CUMMINS ENGINE STUD

INSERT KIT. Special inserts for
repair of 11/16-16 holes in
Cummins engine blocks.
Automobiles
Buses
Trucks
Heavy Equipment
Marine Equipment
Machinery
Tooling
Power Tools
Recreational Vehicles
Small Engines
Copyright Alcoa Fastening Sytems, 2006.
U.S Patent No. 2855970 Other patents issued and pending.
Tridair Products 45
Removal of KEENSERTS Inserts

It is unlikely that KEENSERTS inserts will
ever have to be removed since their
threads are stronger than original threads.
If removal is necessary, however, follow
these simple steps.
Drill out old

threads, using
standard drill.
SECTION
Easy Installation/4 Simple Steps
9
1.
Use STANDARD
DRILL to remove
insert material
between Kees.
2. Deflect Kees
inward and break
off.
Tap new threads

using standard tap.
3
Screw in insert until
slightly below
surface. Kees
act as depth stop.
3. Remove insert
with E-Z OUT type
tool.
4. An identical insert
can now be instaled
in the original hole.
No re-work of the
hole will be
necessary.
Kees firmly lock insert in place,

preventing rotation.
4
Drive Kees down
with several light
taps on installation
tool.
Kees are driven into the surrounding base

material to securely lock the insert against
rotation.
5
Installed Insert
Tridair Products 46
SECTION
Single Size Kits Thinwall and Metric
9
THINWALL INSERT KITS AND REFILL KITS
Internal
Thread
Size
External Thread,
Modified Minor
Diameter
10-24
Ki t
Part
No.
No. of
Inserts
P er K i t
Refill
Ki t
Part No.
No. of
Inserts
P er K i t
TR 17738
TR17788
32
TR 17739
TR 17789
32
TR 17740
TR 17790
31
TR 17741
TR 17791
31
TR 17742
TR 17792
27
TR 17743
TR 17793
27
5/16-18
10-32
1/4-20
3/8-16
1/4-28
5/16-18
7/16-14
5/16-24
3/8-16
TR 17744
TR 17794
24
TR 17745
TR 17795
24
TR 17746
TR 17796
22
TR 17747
TR 17797
22
TR 17748
TR 17798
16
TR 17749
TR 17799
16
1/2-13
3/8-24
7/16-14
9/16-12
7/16-20
1/2-13
5/8-11
1/2-20
All dimensions in inches
All inserts on these pages are made

of carbon steel. Each kit shown
includes a tool for driving Kees, and
complete installation instructions.
Refill kits also include instructions but
do not include the tool. THINWALL
inserts are the most versatile
available and are recommended for
the majority of applications. Where
higher strengths or larger sizes are
required, see Heavy Duty inserts on
the following page. METRIC
inserts are supplied with both external
and internal metric threads. BULK
inserts with part numbers shown on
Page 5 may be ordered for highvolume usage.
METRIC INSERT KITS AND REFILL KITS

Internal
Thread
Size
External
Thread
Size
Ki t
Part
No.
No. of
Inserts
P er K i t
Refill
Ki t
Part No.
No. of
Inserts
P er K i t
M5x0.8
M8x1.25
M6x1.0
M10x1.25
TR17503
TR17553
29
TR17504
TR17554
28
M7x1.0
M11x1.0
TR17511
TR17555
21
M8x1.0
M12x1.25
TR17505
TR17556
21
M8x1.25
M12x1.25
TR17506
TR17557
21
M10x1.25
M14x1.5
TR17507
TR17558
16
M10x1.5
M14x1.5
TR17508
TR17559
16
M12x1.25
M16x1.5
TR17509
TR17560
15
M12x1.75
M16x1.5
TR17510
TR17561
15
M14x1.5
M20x1.5
TR17512
TR17562
10
M14x2.0
M20x1.5
TR17513
TR17563
10
M16x1.5
M22x1.5
TR17514
TR17564
10
M18x1.5
M24x1.5
TR17515
TR17565
10
M20x1.5
M30x2.0
TR17516
TR17566
M22x1.5
M32x2.0
TR17517
TR17567
M24x2.0
M33x2.0
TR17518
TR17568
Tridair Products 47
SECTION
Bulk Inserts Thinwall and Metric
9
THINWALL BULK INSERTS
Internal
Thread
Size
External
Thread,
Modified Minor
Diameter
10-24
Insert
Part
No.
INSTALLATION DATA
REMOVAL DATA
Tap
Drill
D i a.
C'Sink
D i a.
Tap
Size
Insert
Tool
Part. No.
Size
Depth
.31
"I"
.32
5/16-18
TRKA 10
7/32
5/32
.37
"Q"
.38
3/8-16
TRKA 1/4
9/32
3/16
.43
"X"
.44
7/16-14
TRKA 5/16
11/32
3/16
.50
29/64
.51
1/2-13
TRKA 3/8
13/32
3/16
.56
33/64
.57
9/16-12
TRKA 7/16
15/32
3/16
.62
37/64
.63
5/8-11
TRKA 1/2
17/32
3/16
Length
Drill
RKKA 10-24
5/16-18
10-32
RKKA 10-32
1/4-20
RKKA 1/4-20
3/8-16
1/4-28
RKKA 1/4-28
RKKA 5/16-18
5/16-18
7/16-14
5/16-24
RKKA 5/16-24
RKKA 3/8-16
3/8-16
1/2-13
3/8-24
RKKA 3/8-24
7/16-14
RKKA 7/16-14
9/16-12
7/16-20
RKKA 7/16-20
1/2-13
RKKA 1/2-13
5/8-11
1/2-20
RKKA 1/2-20
METRIC BULK INSERTS

Internal
Thread
Size
External
Thread
Size
Insert
Part
No.
INSTALLATION DATA
Length
Tap
Drill
D i a.
"H"
REMOVAL DATA
M8x1.25
Insert
Tool
Part. No.
TRKM 5
Size
7/32
C'Sink
D i a.
Tap
Size
.32
Drill
M5x0.8
M8x1.25
KNM 5x0.8F
.315
M6x1.0
M10x1.25
KNM 6x1F
.394
"S"
.40
M1.0x1.25
TRKM 6
19/64
M7x1.0
M11x1.0
KNM 7x1F
.433
"W"
.44
M11x1.0
TRKM 7
"Q"
M8x1.0
M12x1.25
KNM 8x1F
M8x1.25
M12x1.25
KNM 8x1.25F
.472
27/64
.48
M12x1.25
TRKM 8
3/8
M10x1.25
M14x1.5
KNM 10x1.25F
M10x1.5
M14x1.5
KNM 10x1.5F
.551
1/2
.56
M14x1.5
TRKM10
29/64
M12x1.25
M16x1.5
KNM 12x1.25F
M12x1.75
M16x1.5
KNM 12x1.75F
.630
37/64
.63
M16x1.5
TRKM 12
17/32
M14x1.5
M20x1.5
KNHM 14x1.5F
M14x2.0
M20x1.5
KNHM 14x2F
.787
47/64
.79
M20x1.5
TRKHM 14
11/16
45/64
Depth
5/32
3/16
M16x1.5
M22x1.5
KNHM 16x1.5F
.866
13/16
.87
M22x1.5
TRKHM 16
M18x1.5
M24x1.5
KNHM 18x1.5F
.945
57/64
.95
M24x1.5
TRKHM 18
25/32
M20x1.5
M30x2.0
KNHM 20x1.5F
1.181
1-7/64
1.18
M30x2
TRKHM 20
1 - 1/64
M22x1.5
M32x2.0
KNHM 22x1.5F
1.260
1-3/16
1.26
M32x2
TRKHM 22
1 - 3/32
M24x2.0
M33x2.0
KNHM 24x2F
1.299
1-7/32
1.29
M33x2
TRKHM 24
1 - 1/8
Other sizes are available on request
Countersink diameters are optional providing

KEENSERTS insert is below flush of surface.
No standard packaging applies on bulk

quantities.
1/4
Tridair Products 48
SECTION
Single Size Kits Heavy Duty

These kits are recommended for
use where larger sizes or higher
strengths are required. Each kit
shown includes a tool for
driving Kees, and
complete installation
instructions. Refill kits
also include instructions
but do not include the tool.
Bulk inserts with part numbers
shown Page 7 may be ordered for
high-volume usage.
KITS AND REFILL KITS

Internal
Thread
Size
External Thread,
Modified Minor
Diameter
Ki t
Part
No.
No. of
Inserts
P er K i t
Refill
Ki t
Part No.
No. of
Inserts
P er K i t
8-32
5/16-18
TR 17700
TR 17750
32
10-24
TR 17701
TR 17751
32
TR 17702
TR 17752
32
TR 17703
TR 17753
31
3/8-16
10-32
1/4-20
7/16-14
1/4-28
TR 17704
TR 17754
31
5/16-18
TR 17705
TR 17755
27
5/16-24
TR 17706
TR 17756
27
3/8-16
TR 17707
TR 17757
24
24
1/2-13
9/16-12
3/8-24
TR 17708
TR 17758
7/16-14
TR 17709
TR 17759
22
TR 17710
TR 17760
22
TR 17711
TR 17761
16
1/2-20
TR 17712
TR 17762
16
9/16-12
TR 17713
TR 17763
12
5/8-11
7/16-20
1/2-13
3/4-16
3/4-16
9/16-18
TR 17714
TR 17764
12
5/8-11
TR 17715
TR 17765
10
10
7/8-14
5/8-18
TR 17716
TR 17766
3/4-10
TR 17717
TR 17767
TR 17718
TR 17768
TR 17719
TR 17769
7/8-14
TR 17720
TR 17770
1-8
TR 17721
TR 17771
TR 17722
TR 17772
1-1/8-12
3/4-16
7/8-9
1-1/4-12
1-12
1-3/8-12
**1-14
1-1/8-7
1-1/8-12
1-1/2-12
**1-1/8-18
1-1/4-7
TR 17723
TR 17773
TR 17724
TR 17774
TR 17725
TR 17775
TR 17726
TR 17776
1-5/8-12
1-1/4-12
1-1/2-6
TR 17727
TR 17777
TR 17728
TR 17778
1-7/8-12
1-1/2-12
**1-3/4-5
2-1/8-12
**1-3/4-12
Tridair Products 49
SECTION
Bulk Inserts Heavy Duty
9
Internal
Thread
Size
8-32
External Thread,
Modified Minor
Diameter
5/16-18
10-24
Insert
Part
No.
RKK 8-32
INSTALLATION DATA
Length
REMOVAL DATA
Tap
Drill
D i a.
C'Sink
D i a.
Tap
Size
Insert
Tool
Part No.
Size
Depth
.31
"I"
.32
5/16-18
TRK 08
7/32
1/8
.31
"Q"
.38
3/8-16
TRK 10
9/32
1/8
.37
"X"
.44
7/16-14
TRK 1/4
11/32
3/16
.43
29/64
.51
1/2-13
TRK 5/16
13/32
3/16
.50
33/64
.57
9/16-12
TRK 3/8
15/32
3/16
37/64
.63
5/8-11
TRK 7/16
17/32
3/16
45/64
.76
3/4-16
21/32
3/16
Drill
RKK 10-24
3/8-16
10-32
RKK 10-32
1/4-20
RKK 1/4-20
7/16-14
1/4-28
RKK 1/4-28
5/16-18
RKK 5/16-18
1/2-13
5/16-24
RKK 5/16-24
3/8-16
RKK 3/8-16
9/16-12
3/8-24
RKK 3/8-24
7/16-14
RKK 7/16-14
5/8-11
7/16-20
RKK 7/16-20
.62
1/2-13
RKK 1/2-13
3/4-16
1/2-20
TRK 1/2
RKK 1/2-20
9/16-12
RKK 9/16-12
3/4-16
9/16-18
.81
RKK 9/16-18
5/8-11
RKK 5/8-11
7/8-14
5/8-18
3/4-10
53/64
.88
7/8-14
TRK 5/8
25/32
3/16
1.12
1-1/16
1.14
1-1/8-12
TRK 3/4
31/32
5/16
1.25
1-3/16
1.27
1-1/4-12
TRK 7/8
1-3/32
5/16
1.37
1-5/16
1.39
1-3/8-12
TRK 1
1-7/32
5/16
1.62
1-7/16
1.52
1-1/2-12
TRK 1 1/8
1-11/32
5/16
1.81
1-9/16
1.64
1-5/8-12
TRK 1 1/4
1-15/32
5/16
2.00
1-13/16
1.89
1-7/8-12
TRK 1 1/2
1-23/32
5/16
2.12
2-1/16
2.14
2-1/8-12
TRK 1 3/4
1-31/32
5/16
RKK 3/4-10
1-1/8-12
RKK 3/4-16
7/8-9
RKK 7/8-9
1-1/4-12
7/8-14
RKK 7/8-14
1-8
RKK 1-8
1-3/8-12
1-14
RKK 1-12
RKK 1-14
1-1/8-7
1-1/8-12
.87
RKK 5/8-18
3/4-16
1-12
TRK 9/16
RKK 1 1/8-7
1-1/2-12
1-1/8-18
RKK 1 1/8-12
RKK 1 1/8-18
1-1/4-7
RKK 1 1/4-7
1-5/8-12
1-1/4-12
RKK 1 1/4-12
1-1/2-6
RKK 1 1/2-6
1-7/8-12
1-1/2-12
RKK 1 1/2-12
1-3/4-5
RKK 1 3/4-5
2-1/8-12
1-3/4-12
All dimensions are in inches.
RKK 1 3/4-12
Countersink diameters are optional providing
KEENSERTS insert is below flush of surface.
No standard packaging applies on bulk
quantities.
Tridair Products 50
External Thread
Master Kit
Modified Minor
Part No.
Diameter
No. of
Inserts
P er K i t
COARSE
Master Insert
Kits
Heavy Duty
1/4-20
7/16-14
5/16-18
1/2-13
3/8-16
9/16-12
7/16-14
5/8-11
1/2-13
3/4-16
9/16-12
3/4-16
5/8-11
7/8-14
3/4-10
1-1/8-12
7/8-9
1-1/4-12
1-8
1-3/8-12
20
15
TR 17735
10
10
Unified
National
Coarse
Series
Threads
6
5
3
3
SECTION
Internal
Thread
Size
3
2
FINE
1/4-28
7/16-14
20
5/16-24
1/2-13
15
3/8-24
9/16-12
TR 17736
10
7/16-20
5/8-11
1/2-20
3/4-16
10
9/16-18
3/4-16
5/8-18
7/8-14
3/4-16
1-1/8-12
7/8-14
1-1/4-12
1-12
1-3/8-12
10-24
5/16-18
20
1/4-20
3/8-16
20
5/16-18
7/16-14
3/8-16
1/2-13
7/16-14
9/16-12
1/2-13
5/8-11
Unified
National
Coarse
Series
Threads
6
5
3
3
Thinwall
COARSE
These master kits are ideal for use where inserts are
used on a regular basis for repair operations. Each kit
contains several different sizes of inserts as tabulated,
tool for driving Kees, and complete installation
instructions. The kits provide convenient storage and
easy access to the various sizes. All inserts are made
of carbon steel.
Metric
See page 4 and 5 for refill kits and bulk inserts.
TR17780
15
10
10
6
FINE
10-32
5/16-18
20
1/4-28
3/8-16
20
5-16-24
7/16-14
3/8-24
1/2-13
7/16-20
9/16-12
10
1/2-20
5/8-11
TR17781
15
10
6x1.0
10x1.25
20
8x1.0
12x1.25
20
8x1.25
12x1.25
10x1.25
14x1.5
15
TR17525
10
10x1.5
14x1.5
10
12x1.25
16x1.5
12x1.75
16x1.5
14x1.5
20x1.5
14x2.0
20x1.5
16x1.5
22x1.5
18x1.5
24x1.5
20x1.5
30x2.0
22x1.5
32x2.0
24x2.0
33x2.0
TR17550
Tridair Products 51
Inserts in these kits are designed for use in the repair or modification of spark plug threads in may types of cylinder heads. 14mm
spark plug inserts can be used with most types of spark plugs,
tapered seat as well as gasket seat. Manufactured from a highstrength aluminum alloy, only KEENSERTS inserts will operate as
cool as the original
condition. Cooler
operation means better
performance, increased
plug life and reduced
emissions.
Sealing
washers are also included
in each kit. They provide
a positive seal to prevent
the escape of gas from
the combustion chamber.
Each master kit includes
complete instructions and
tools for installation. Refill
kits are available to
replenish the master kit.
SECTION
Spark Plug
Insert Kits
SPARK PLUG
MASTER KITS AND REFILL KITS
Spark Plug
Reach
Spark Plug
Size
Kit Part
No.
1/2"
M10x1.0
TR 17420
1/2" & 3/4" Mixed
M12x1.25
TR 17425
3/8"
No. of Inserts/
Sealing Washers
P er K i t
12
6 each size
TR 17401
7/16"
1/2"
3/4"
3/8"-7/16"
1/2"-3/4" Mixed
12
TR 17403
TR 17404
M14x1.25
TR 17406
TR 17426
10 1/2" reach
TR 17427
10 3/4" reach
TR 17411
TR 17402
M14x1.25
TR 17421
No. of Inserts/
Sealing Washers
P er K i t
10
Refill Kit
Part No.
3 each size
TR 17412
10
TR 17413
TR 17414
TR 17411 through TR 17414
as needed
SPARK PLUG
BULK INSERTS
INSTALLATION DATA
Spark Plug
Size
M10x1.0
M12x1.25
M14x1.25
Insert Part
No.
Tap Drill
Length S
ize
KNPM 10E-3
1/2
KNPM 12E-3
1/2
KNPM 12E-4
3/4
KNP 14E-1
3/8
KNP 14E-2
7/16
KNP 14E-3
1/2
KNP 14E-4
3/4
1/2
Tap Size
Insert Tool
Part No.
M14X1.5
TRKM-10
REMOVAL DATA
Drill
Size
Depth
29/64
37/64
M16X1.5
TRKM-12
17/32
TR 17595
21/32
Sealing
Ream &
Tap Tool
Washer Part C'Sink Tool P
art No.
No.
Part No.
KNPMW-10 -
3/16
1/4
KNPMW-12
KNPW-14
TR 17596
TKNP 14-4
*For installation of M14 spark plugs, see installation

instructions included with Spark Plug Master Kit.
No standard packaging applies on bulk inserts.
All dimensions are in inches.
Tridair Products 52
SECTION
Typical Insert
Test Results
9
RKK Series
Bolts Grade 8 and 8.1 Ref.
Carbon Steel
Insert Part No.
(2)
Average Pullout
Test Results
6061-T6
Aluminum
(Lbs.)
(3) (4)
(5) Max.
Low and High
Suggested
Torque Tension Seating Torque
Test Results
of Bolt
(In.-Lbs.)
(In.-Lbs.)
Stainless
Steel Insert
Part No.
(6)
(7)
Average Pullout
Test Results
6061-T6
Aluminum
(Lbs.)
5,050 (C)
Proof Load,
L b s.
Tensile
Strength
Min., Lbs.
RKK 10-32
1,700(1)
2,400(1)
5,590 (B)
112-125 (B)
50
KNH1032J
RKK 1/4-20
3,800
4,750
7,238 (A)
197-247 (B)
105
KNH420J
8,250 (B)
RKK 5/16-18
6,300
7,850
9,381 (A)
465-537 (B)
165
KNH518J
11,100 (C)
14,350 (C)
RKK 3/8-16
9,300
11,600
12,372 (A)
882-940 (B)
294
KNH616J
RKK 3/8-24
10,500
13,200
13,000 (A)
769-1,003 (A)
294
KNH624J
13,750 (C)
RKK 1/2-13
17,000
21,300
21,300 (A)
1,476-2,208 (B)
690
KNH813J
25,100 (C)
RKK 5/8-11
27,100
33,900
37,600 (A)
3,203--4,881 (B)
1,290
KNH1011J
44,950 (C)
RKK 5/8-18
30,700
38,400
33,000 (A)(3)
4,514-4,641 (B)
1,290
KNH1018J
38,000 (C)
50,100
(3)
6,072 (T.S)
2,080
KNH1210J
78,300 (C)
RKK 3/4-10
40,100
71,200 (A)
Notes:
6. The KN and KNH series inserts are made of 303 stainless.
1. Grade 5 bolt values.
The configuration is the same as the RKKA or RKK inserts
2. Data from engineering report No.2112.
shown in this catalog, except the KNH813J has an 11/16-11NS
3. Test conducted in2024-T4 aluminum.
external thread.
4. Test from engineering report No. 9311. The 10-32 size used was a 7. The values are the average of various lot tests
160,000psi bolt. The other bolts were grade 8. T.S.= test stopped.
5. This data is based upon torque loads necessary to develop
approximatley 75% of the proof loads of a cadmium plated grade 8
bolt. It assumes the insert is in an aluminum or steel with a 37,000
psi shear strength. Should the torque tension relationship be
critical, the user should conduct tests to determine the propr values
to use.
Test Methods
Tridair Products 53
SECTION
RKKA Series
Proof Load,
L b s.
Tensile
Strength
Min., Lb.
(2)
Average Pullout
Test Results
6061-T6
Aluminum
(Lbs.)
(3) (4)
Low and High
Torque Tension
Test Results
(In.-Lbs.)
(5) Max.
Suggested
Seating Torque
of Bolt
(In.-Lbs.)
Stainless
Steel Insert
Part No.
(6)
(7)
Average Pullout
Test Results
6061-T6
Aluminum
(Lbs.)
RKKA 1/4-20
3,800
4,750
7,448 (A)
163-260 (B)
105
KN420J
7,600 (C)
RKKA 5/16-18
6,300
7,850
7,537 (A)
376-470 (A)
165
KN518J
9,600 ( C)
RKKA 3/8-16
9,300
11,600
11,556 (A)
504-741 (A)
294
KN616J
13,400 (C)
RKKA 3/8-24
17,000
21,300
16,812 (A)
1,536-1,740 (A)
690
KN813J
21,000 (C)
RKKA 1/2-20
19,200
24,000
16,860 (A)
1,100-1,599 (A)
690
KN820J
20,700 (C)
Bolts Grade 8 and 8.1 Ref.

Carbon Steel
Insert Part No.
Notes:
6. The KN and KNH series inserts are made of 303 stainless. The
configuration is the same as the RKKA or RKK inserts shown in
1. Grade 5 bolt values.
2. Data from engineering report No.2112.
this catalog.
3. Test conducted in #2024-T4 aluminum.
7. The values are the average of various lot tests
4. Test from engineering report No. 9311.
5. This data is based upon torque loads necessary to develop
approximatley 75% of the proof loads of a cadmium plated grade 8
bolt. It assumes the insert is in an aluminum or steel with 37,000
psi shear strength. Should the torque tension relationship be
critical, the user should conduct tests to determine the propr values
to use.
Failure Modes
Tridair Products 54
Tridair Self-Broaching KEENSERTS Inserts

with Vespel Locking Element
High Temperature Tolerance for Hostile Environmental Applications

Vespel Locking Element Provides High Reuseability
Self-Broaching KEES Ease Installation into Hard Parent Material
Insert may be removed and replaced with identical insert with no loss of strength or re-work of the hole
These new Tridair Self-Braoching KEENSERTS Inserts have a
Vespel SP polymide resin locking element to provide an
interference fit with the bolt at the time of assembly. The Vespel
material allows for high temperatures and multiple reuse. They
have been tested to 6000F with an INCO 7-18 bolt loaded to 120
KSI stress for 6 hours. And, after fifty repeated tests the
minimum breakaway torque of the insert was still within the
values of MIL-I-45914 and other applicable specifications. The
420 CRES KEES ease installation into parent materials with
Rockwell hardness of RC44 or less.
Ordering Information
Part
Number
TR24361-3
TR24361-4
TR24361-5
TR24361-6
A
Internal Thread
UNJF-3B
B
External Thread
UNC-2A
Size
Size
Modified
Minor Dia.
.1900-32
.2500-28
.3125-24
.3750-24
.3750-16
.4375-14
.5000-13
.5625-12
.312-.320
.375-.383
.434-.438
.495-.503
Material:
Insert:
A286 CRES per AMS5737, AMS5731
Locking KEES:
420CRES per QQ-S-763
Locking Element:
Vespel SP polymide resin
Finish:
F
Max.
H
.015
J
.015
.312
.375
.432
.495
.350
.400
.480
.540
.265
.300
.360
.400
Notes:
1. Unless otherwise noted, all dimensions are in inches.
2. See reverse side for Hole Preparation. Installation and
Removal Data.
3. Inserts with Internal Thread B size .250 and below are
furnished with two Self-Broaching KEES: all others are
furnished with four.
4. Also available in metric sizes: see Catalog No. 4700.
Insert:
Passivated per QQ-S-35, with dry film lube
Heat Treat:
Insert:
Per MIL-H-6875 to 1400,000 PSI FTU minimum
TRIDAIR and KEENSERTS are registered trademarks of ALCOA & FAIRCHILD FASTENERS.
VESPEL is a registered trademark of the E.I. DuPont de Nemours & Co.
Tridair Products
Tridair Self-Broaching KEENSERTS Inserts

with Vespel Locking Element
Typical Hole Preparation
Insert
Part
No.
A
Tap
Drill
Dia
B
C'Sink Dia.
+.010
-.000
C
Min. Full
Thread
Depth
T
Thread Tap
Size
UNC-2B
Power
Installation Tool
Nosepiece Part
No.*
Removal
Data
Drill Ref.
TR24361-3
.332
.385
.44
.3750-16
TR24361-3-100
9/32
TR24361-4
TR24361-5
TR24361-6
.397
.453
.516
.447
.510
.572
.50
.59
.66
.4375-14
.5000-13
.5625-12
TR24361-6-100
TR24361-5-100
TR24361-6-100
11/32
13/32
15/32
Size
Depth
.188
*Nosepieces are for use on KEENSERT Power Insallation Tool, Part No. 70950-6
Hole Preparation:
1. Locate and drill with standard drill to ADia.
2. Countersink with standard countersink (820 to 1000), to B Dia.
3. Tap with a standard tap to produce thread form T.
Insert Installation:
1. Start the tool by depressing the Air Supply Lever. This will rotate the threaded mandrel in a
clockwise direction. Place the top end of the KEENSERT against the rotating mandrel and thread it
on (Figure 1).
2. With the loaded tool rotating clockwise (Air Supply Lever depressed), place the KEENSERT
threaded hole in the part and allow it to screw in (Figure 2). Take care to align the tool with the axis of
the hole. When the insert is at the correct depth the shoulder on the nosepiece will contact the part
and stall the tool. Remove hand from Air Supply Lever.
3. Drive KEES bt pushing KEE Drive Button (Figure 3).
4. Back the tool out by first depressing the Reverse Button and then the Air Supply Lever. Release
the button after the tool is out. The tool is now ready to be loaded for the next installation (Figure 4).
5. Tool Inlet Pressure
The 70590-6 power tool has automatically installed seld-broaching KEENSERT inserts and studs
into materials such as A286, Inconell 718, Hastoloy X, 17-4PH and titanium.
Since the 420 CRES KEE acts as a cutting tool, each application using the self-broaching
KEENSERT should allow for some test samples of the material used in production to determine
actual minimum pressure required.
Typical Pressure Settings Required:
Rc Hardness
Pressure to 709050-6 Tool
WARNING:
Do not set pressure
above 150 PSI .
to 26.6
90-100 PSI
26.6 to 34.3
100-125 PSI
34.3 to 43.1
125-150 PSI
6. Axis of hole to be normal to entry surface or provide spotface when required
Removal (if required follow these simple steps):

1. Use standard drill to remove insert material between KEES (see table above).
4. An identical insert can be installed in the original hole. No re-work of the hole is necessary.
Strength of the replacement is equal to that of the original.
Specifications subject to change without notice

Maryland Metrics Keenserts

Uploaded by

Copyright:

Available Formats

Maryland Metrics Keenserts

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Maryland Metrics Keenserts

Uploaded by

Copyright:

Available Formats

What are Keensert inserts and studs designed to provide?

What are Keensert inserts and studs designed to provide?

What locking mechanisms are Keensert inserts available with?

What locking mechanisms are Keensert inserts available with?

Alcoa Fastening Systems KEENSERT products are available from MARYLAND METRICS

Inserts and Studs

Keenserts Key-type Inserts and Studs

Keenserts inserts and studs are

Steels, as well as Inconel X-750 and

Both unified and metric products are

Features and Benefits of Tridair KEENSERTS Inserts

Designed and manufactured by a well-known and respected manufacturer of thread

Solid bushing with locking kees.

High strength and reliability.

No special skill required to use KEENSERTS Inserts.

Hole preparation with standard drill and tap.

Inserted with fingers.

Impossible to cross-thread during installation.

Can be removed very simply when necessary.

Prepared hole not affected when insert is removed.

No tang to break off after installation.

Available in inch and metric sizes.

Available for spark plug applications.

KEENSERTS Inserts Installation Guidelines

Thickness of Parent Material

Internal Thread Lock

Standard Minor Diameter Versus Modified Minor

KEENSERTS INSERTS AND STUDS

Positive mechanical lock against rotation.

Installed with standard taps and drills.

Available from stock in many sizes and types.

(For Reference Purposes Only)

To compute the Pull-Out Strength in any parent material,

Internal thread lock feature available.

ABOUT SHEAR ENGAGEMENT AREA

Lightweight, Heavy Duty and Extra Heavy Duty Inserts:

Carbon Steel Inserts: These inserts offer the designer a

SPECIAL PURPOSE INSERTS

Floating Inserts: Compensate for misalignment automatically. Ideal

Blind End Inserts: Where it is important to keep a screw isolated

Hydraulic Inserts: For complete port protection in hydraulic or fuel

High-Strength Aluminum Inserts: For miniaturized space and

Solid Inserts: For relocating holes that have been drilled or

Miniature Series Inserts

Lightweight Series Inserts

Heavy Duty Series Inserts

Carbon Steel Inserts

GENERAL PURPOSE STUDS

Shear Load Series Studs/ AND Standards

Lightweight Series Studs

Heavy Duty Series Studs/ AND Standards

Shear Load Series Studs

Lightweight Series Studs

Heavy Duty Series Studs

TR28000 ( ) Series Studs

TR29000 ( ) Series Inserts

BULK INSERTS AND KITS

Unlike conventional inserts, there is no need to

n DRILL with a STANDARD drill.

Screw in insert with fingers or installation tool. Insert is