IT2042 - Information Security 1-1

DEPARTMENT OF Computer Science & Engineering

FINAL YEAR

IT2042 INFORMATION SECURITY 3 0 0 100

AIM

To study the critical need for ensuring Information Security in Organizations

OBJECTIVES

1. To understand the basics of Information Security

2. To know the legal, ethical and professional issues in Information Security
3. To know the aspects of risk management
4. To become aware of various standards in this area
5. To know the technological aspects of Information Security

UNIT 1 INTRODUCTION 9

History, What is Information Security?, Critical Characteristics of Information,

NSTISSC Security Model, Components of an Information System, Securing the
Components, Balancing Security and Access, The SDLC, The Security SDLC

UNIT II SECURITY INVESTIGATION 9

Need for Security, Business Needs, Threats, Attacks, Legal, Ethical and Professional
Issues

UNIT III SECURITY ANALYSIS 9

Risk Management: Identifying and Assessing Risk, Assessing and Controlling Risk

UNIT IV LOGICAL DESIGN 9

Blueprint for Security, Information Security Poicy, Standards and Practices, ISO
17799/BS 7799, NIST Models, VISA International Security Model, Design of Security
Architecture, Planning for Continuity

UNIT V PHYSICAL DESIGN 9

Security Technology, IDS, Scanning and Analysis Tools, Cryptography, Access
Control Devices, Physical Security, Security and Personnel

TOTAL : 45
TEXT BOOK
1. Michael E Whitman and Herbert J Mattord, “Principles of Information
Security”, Vikas Publishing House, New Delhi, 2003

REFERENCES
1. Micki Krause, Harold F. Tipton, “ Handbook of Information Security
Management”, Vol 1-3 CRC Press LLC, 2004.
2. Stuart Mc Clure, Joel Scrambray, George Kurtz, “Hacking Exposed”, Tata
McGraw-Hill, 2003
Matt Bishop, “ Computer Security Art and Science”, Pearson/PHI, 2002.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-2

IT2042 INFORMATION SECURITY

UNIT 1 INTRODUCTION

History, What is Information Security?, Critical Characteristics of Information,

NSTISSC Security Model, Components of an Information System, Securing the
Components, Balancing Security and Access, The SDLC, The Security SDLC

History
 Persons desiring secure communications have used wax seals.
 Julius Caesar-Caesar Cipher c50 B.C., which was created in order to prevent
his secret messages from being, read should a message fall into the wrong
hands.
 The end of the 20th century and early years of the 21st century saw rapid
advancements in telecommunications, computing hardware and software, and
data encryption.
INTRODUCTION
Information technology is the vehicle that stores and transports information—a
company’s most valuable resource—from one business unit to another.
But what happens if the vehicle breaks down, even for a little while?
As businesses have become more fluid, the concept of computer security has been
replaced by the concept of information security.
Because this new concept covers a broader range of issues, from the protection of
data to the protection of human resources, information security is no longer the sole
responsibility of a discrete group of people in the company; rather, it is the
responsibility of every employee, and especially managers.
Organizations must realize that information security funding and planning decisions
involve more than just technical managers:
Rather, the process should involve three distinct groups of decision makers, or
communities of interest:
 Information security managers and professionals
 Information technology managers and professionals
 Nontechnical business managers and professionals
These communities of interest fulfill the following roles:
 The information security community protects the organization’s information
assets from the many threats they face.
 The information technology community supports the business objectives of
the organization by supplying and supporting information technology
appropriate to the business’ needs.
 The nontechnical general business community articulates and communicates
organizational policy and objectives and allocates resources to the other
groups.

WHAT IS SECURITY?

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-3

Understanding the technical aspects of information security requires that you know
the definitions of certain information technology terms and concepts.
In general, security is defined as “the quality or state of being secure—to be free
from danger.”
Security is often achieved by means of several strategies usually undertaken
simultaneously or used in combination with one another.
Specialized areas of security
 Physical security, which encompasses strategies to protect people, physical
assets, and the workplace from various threats including fire, unauthorized
access, or natural disasters
 Personal security, which overlaps with physical security in the protection of
the people within the organization
 Operations security, which focuses on securing the organization’s ability to
carry out its operational activities without interruption or compromise
 Communications security, which encompasses the protection of an
organization’s communications media, technology, and content, and its ability
to use these tools to achieve the organization’s objectives
 Network security, which addresses the protection of an organization’s data
networking devices, connections, and contents, and the ability to use that
network to accomplish the organization’s data communication functions
 Information security includes the broad areas of information security
management, computer and data security, and network security.

Where it has been used?

 Governments, military, financial institutions, hospitals, and private
businesses.
 Protecting confidential information is a business requirement.
Information Security components are
 Confidentiality
 Integrity
 Availability(CIA)

CIA Triangle
The C.I.A. triangle - confidentiality, integrity, and availability - has expanded into a
more comprehensive list of critical characteristics of information.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-4

At the heart of the study of information security is the concept of policy. Policy,
awareness, training, education, and technology are vital concepts for the protection
of information and for keeping information systems from danger.

Critical Characteristics of Information

-Confidentiality - Integrity -Availability
- Privacy - Identification - Authentication
- Authorization - Accountability -Accuracy
- Utility - Possession

Confidentiality
Confidentiality of information ensures that only those with sufficient privileges may
access certain information. When unauthorized individuals or systems can access
information, confidentiality is breached. To protect the confidentiality of information,
a number of measures are used:
 Information classification
 Secure document storage
 Application of general security policies
 Education of information custodians and end users

Example, a credit card transaction on the Internet.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-5

a. The system attempts to enforce confidentiality by encrypting the

card number during transmission, by limiting the places where it
might appear (in data bases, log files, backups, printed receipts,
and so on), and by restricting access to the places where it is
stored.
b. Giving out confidential information over the telephone is a breach
of confidentiality if the caller is not authorized to have the
information, it could result in a breach of confidentiality.
Integrity
Integrity is the quality or state of being whole, complete, and uncorrupted. The
integrity of information is threatened when it is exposed to corruption, damage,
destruction, or other disruption of its authentic state. Corruption can occur while
information is being compiled, stored, or transmitted.
 Integrity means that data cannot be modified without authorization.
 Eg: Integrity is violated when an employee deletes important data files, when
a computer virus infects a computer, when an employee is able to modify his
own salary in a payroll database, when an unauthorized user vandalizes a
website, when someone is able to cast a very large number of votes in an
online poll, and so on.
Availability
Availability is the characteristic of information that enables user access to
information without interference or obstruction and in a required format. A user in
this definition may be either a person or another computer system. Availability does
not imply that the information is accessible to any user; rather, it means availability
to authorized users.
 For any information system to serve its purpose, the information must be
available when it is needed.
 Eg: High availability systems aim to remain available at all times, preventing
service disruptions due to power outages, hardware failures, and system
upgrades.
Privacy
The information that is collected, used, and stored by an organization is to be used
only for the purposes stated to the data owner at the time it was collected. This
definition of privacy does focus on freedom from observation (the meaning usually
associated with the word), but rather means that information will be used only in
ways known to the person providing it.
Identification
An information system possesses the characteristic of identification when it is able to
recognize individual users. Identification and authentication are essential to
establishing the level of access or authorization that an individual is granted.
Authentication
Authentication occurs when a control provides proof that a user possesses the
identity that he or she claims.
 In computing, e-Business and information security it is necessary to ensure
that the data, transactions, communications or documents(electronic or
physical) are genuine(i.e. they have not been forged or fabricated)
Authorization

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-6

After the identity of a user is authenticated, a process called authorization provides

assurance that the user (whether a person or a computer) has been specifically and
explicitly authorized by the proper authority to access, update, or delete the contents
of an information asset.
Accountability
The characteristic of accountability exists when a control provides assurance that
every activity undertaken can be attributed to a named person or automated
process. For example, audit logs that track user activity on an information system
provide accountability.

Accuracy
Information should have accuracy. Information has accuracy when it is free from
mistakes or errors and it has the value that the end users expects. If information
contains a value different from the user’s expectations, due to the intentional or
unintentional modification of its content, it is no longer accurate.

Utility
Information has value when it serves a particular purpose. This means that if
information is available, but not in a format meaningful to the end user, it is not
useful. Thus, the value of information depends on its utility.
Possession
The possession of Information security is the quality or state of having ownership or
control of some object or item.

NSTISSC Security Model

‘National Security Telecommunications & Information systems security
committee’ document.
- It is now called the National Training Standard for Information security
professionals.
The NSTISSC Security Model provides a more detailed perspective on security.
While the NSTISSC model covers the three dimensions of information security, it
omits discussion of detailed guidelines and policies that direct the implementation of
controls.
Another weakness of using this model with too limited an approach is to view it from
a single perspective.
-The 3 dimensions of each axis become a 3x3x3 cube with 27 cells representing
areas that must be addressed to secure today’s Information systems.
- To ensure system security, each of the 27 cells must be properly addressed during
the security process.
-For ex,the intersection between technology, Integrity & storage areas requires a
control or safeguard that addresses the need to use technology to protect the
Integrity of information while in storage.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-7

NSTISSC Security Model

Components of an Information System

- Software - Hardware - Data
- People - Procedures - Networks

Software
The software components of IS comprises applications, operating systems, and
assorted command utilities. Software programs are the vessels that carry the
lifeblood of information through an organization. These are often created under the
demanding constraints of project management, which limit time, cost, and
manpower.

Hardware
Hardware is the physical technology that houses and executes the software, stores
and carries the data, and provides interfaces for the entry and removal of
information from the system. Physical security policies deal with hardware as a
physical asset and with the protection of these physical assets from harm or theft.
Applying the traditional tools of physical security, such as locks and keys, restricts
access to and interaction with the hardware components of an information system.
Securing the physical location of computers and the computers themselves is
important because a breach of physical security can result in a loss of information.
Unfortunately, most information systems are built on hardware platforms that cannot
guarantee any level of information security if unrestricted access to the hardware is
possible.

Data
 Data stored, processed, and transmitted through a computer system must be
protected.
 Data is often the most valuable asset possessed by an organization and is the
main target of intentional attacks.
 The raw, unorganized, discrete(separate, isolated) potentially-useful facts and
figures that are later processed(manipulated) to produce information.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-8

People
There are many roles for people in information systems. Common ones include
 Systems Analyst
 Programmer
 Technician
 Engineer
 Network Manager
 MIS ( Manager of Information Systems )
 Data entry operator

Procedures
A procedure is a series of documented actions taken to achieve something. A
procedure is more than a single simple task. A procedure can be quite complex and
involved, such as performing a backup, shutting down a system, patching software.

Networks
 When information systems are connected to each other to form Local Area
Network (LANs), and these LANs are connected to other networks such as the
Internet, new security challenges rapidly emerge.
 Steps to provide network security are essential, as is the implementation of
alarm and intrusion systems to make system owners aware of ongoing
compromises.

Securing Components
-Protecting the components from potential misuse and abuse by unauthorized users.
Subject of an attack – Computer is used as an active tool to conduct the attack.
Object of an attack – Computer itself is the entity being attacked
.Two types of attacks
- Direct attack
- Indirect attack

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-9

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-10

Internet

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-11

Stolen Information
REMOTE
SYSTEM

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-12

SYSTEM

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-13

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-14

Hacker request

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-15

Hacker using a computer Remote system that

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-16

as the subject of attack is the object of an attack

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-17

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-18

1. Direct attack

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-19

When a Hacker uses his personal computer to break into a

system.[Originate from the threat itself]

2. Indirect attack
When a system is compromised and used to attack other system.
[Originate from a system or resource that itself has been attacked, and is
malfunctioning or working under the control of a threat].

A computer can, therefore, be both the subject and object of an attack when ,for
example, it is first the object of an attack and then compromised and used to
attack other systems, at which point it becomes the subject of an attack.

Balancing Information Security and Access

- Has to provide the security and is also feasible to access the information for
its application.
- Information Security cannot be an absolute: it is a process, not a goal.
- Should balance protection and availability.

Approaches to Information Security Implementation

- Bottom- up- approach.

- Top-down-approach
 Has higher probability of success.
 Project is initiated by upper level managers who issue policy &
procedures & processes.
 Dictate the goals & expected outcomes of the project.
 Determine who is suitable for each of the required action.

The Systems Development Life Cycle (SDLC)

Investigation

Analysis

Logical design

Physical design

Implementation

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-20

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-21

Repeat
Maintenance and
change

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-22

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-23

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-24

SDLC Waterfall Methodology

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-25

SDLC-is a methodology for the design and implementation of an information system

in an organization.
- A methodology is a formal approach to solving a problem based on a
structured sequence of procedures.
- SDLC consists of 6 phases.
Investigation
- It is the most important phase and it begins with an examination of the
event or plan that initiates the process.
- During this phase, the objectives, constraints, and scope of the project are
specified.
- At the conclusion of this phase, a feasibility analysis is performed, which
assesses the economic, technical and behavioral feasibilities of the process
and ensures that implementation is worth the organization’s time and effort.
Analysis
- It begins with the information gained during the investigation phase.
- It consists of assessments (quality) of the organization, the status of
current systems, and the capability to support the proposed systems.
- Analysts begin by determining what the new system is expected to do, and
how it will interact with existing systems.
- This phase ends with the documentation of the findings and an update of
the feasibility analysis.
Logical Design
- In this phase, the information gained from the analysis phase is used to
begin creating a systems solution for a business problem.
- Based on the business need, applications are selected that are capable of
providing needed services.
- Based on the applications needed, data support and structures capable of
providing the needed inputs are then chosen.
- In this phase, analysts generate a number of alternative solutions, each
with corresponding strengths and weaknesses, and costs and benefits.
- At the end of this phase, another feasibility analysis is performed.

Physical design
- In this phase, specific technologies are selected to support the solutions
developed in the logical design.
- The selected components are evaluated based on a make-or-buy decision.
- Final designs integrate various components and technologies.
Implementation
- In this phase, any needed software is created.
- Components are ordered, received and tested.
- Afterwards, users are trained and supporting documentation created.
- Once all the components are tested individually, they are installed and
tested as a system.
- Again a feasibility analysis is prepared, and the sponsors are then presented
with the system for a performance review and acceptance test.
Maintenance and change

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-26

- It is the longest and most expensive phase of the process.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-27

- It consists of the tasks necessary to support and modify the system for the
remainder of its useful life cycle.
- Periodically, the system is tested for compliance, with business needs.
- Upgrades, updates, and patches are managed.
- As the needs of the organization change, the systems that support the
organization must also change.
- When a current system can no longer support the organization, the project
is terminated and a new project is implemented.
-
The Security Systems Development Life Cycle (Sec SDLC )
- The same phases used in the traditional SDLC can be adapted to support
the implementation of an information security project.
Investigation
- This phase begins with a directive from upper management, dictating the
process, outcomes, and goals of the project, as well as its budget and other
constraints.
- Frequently, this phase begins with an enterprise information security
policy, which outlines the implementation of a security program within the
organization.
- Teams of responsible managers, employees, and contractors are organized.
- Problems are analyzed.
- Scope of the project, as well as specific goals and objectives, and any
additional constraints not covered in the program policy, are defined.
- Finally, an organizational feasibility analysis is performed to determine
whether the organization has the resources and commitment necessary to
conduct a successful security analysis and design.
Analysis
- In this phase, the documents from the investigation phase are studied.
- The developed team conducts a preliminary analysis of existing security
policies or programs, along with that of documented current threats and
associated controls.
- The risk management task also begins in this phase.
-Risk management is the process of identifying, assessing, and evaluating
the levels of risk facing the organization, specifically the threats to the organization’s
security and to the information stored and processed by the organization.

Logical design
- This phase creates and develops the blueprints for information security, and
examines and implements key policies.
- The team plans the incident response actions.
- Plans business response to disaster.
- Determines feasibility of continuing and outsourcing the project.
Physical design
- In this phase, the information security technology needed to support the
blueprint outlined in the logical design is evaluated.
- Alternative solutions are generated.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-28

- Designs for physical security measures to support the proposed

technological solutions are created.
- At the end of this phase, a feasibility study should determine the readiness
of the organization for the proposed project.
- At this phase, all parties involved have a chance to approve the project
before implementation begins.
Implementation
- Similar to traditional SDLC
- The security solutions are acquired ( made or bought ), tested,
implemented, and tested again
- Personnel issues are evaluated and specific training and education programs
are conducted.
- Finally, the entire tested package is presented to upper management for
final approval.
Maintenance and change
- Constant monitoring, testing, modification, updating, and repairing to meet
changing threats have been done in this phase.

Security Professionals and the organization

Senior management
Chief information Officer (CIO) is the responsible for
 Assessment
 Management
 And implementation of information security in the organization
Information Security Project Team
 Champion
- Promotes the project
- Ensures its support, both financially & administratively.
 Team Leader
- Understands project management
- Personnel management
- And information Security technical requirements.
 Security policy developers
- individuals who understand the organizational culture,
- existing policies
- Requirements for developing & implementing successful policies.
 Risk assessment specialists
- Individuals who understand financial risk assessment techniques.
- The value of organizational assets,
- and the security methods to be used.
 Security Professionals
- Dedicated
- Trained, and well educated specialists in all aspects of information security
from both a technical and non technical stand point.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-29

 System Administrators

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-30

- Administrating the systems that house the information used by the

organization.
 End users
Data owners
Three types Data custodians

Data users
Data Owners
- Responsible for the security and use of a particular set of information.
- Determine the level of data classification
- Work with subordinate managers to oversee the day-to-day administration
of the data.
Data Custodians
- Responsible for the storage, maintenance, and protection of the
information.
- Overseeing data storage and backups
- Implementing the specific procedures and policies.
Data Users (End users)
- Work with the information to perform their daily jobs supporting the mission
of the organization.
- Everyone in the organization is responsible for the security of data, so data
users are included here as individuals with an information security role.

Key Terms in Information Security Terminology

Asset
-An asset is the organizational resource that is being protected.
-An Asset can be logical ,such as
 Website, information or data
- Asset can be physical, such as
 person , computer system
Attack
- An attack is an intentional or unintentional attempt to cause damage to or
otherwise compromise the information and /or the systems that support it.
If someone casually reads sensitive information not intended for his use,
this is considered a passive attack. If a hacker attempts to break into an
information system, the attack is considered active.
Risk
- Risk is the probability that something can happen. In information security, it
could be the probability of a threat to a system.
Security Blueprint
- It is the plan for the implementation of new security measures in the
organization. Sometimes called a frame work, the blueprint presents an
organized approach to the security planning process.
Security Model

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-31

- A security model is a collection of specific security rules that represents the

implementation of a security policy.
Threats
-A threat is a category of objects, persons, or other entities that pose a
potential danger to an asset. Threats are always present. Some threats manifest
themselves in accidental occurrences, while others are purposeful. For example, all
hackers represent potential danger or threat to an unprotected information system.
Severe storms are also a threat to buildings and their contents.
Threat agent
- A threat agent is the specific instance or component of a threat. For
example, you can think of all hackers in the world as a collective threat, and
Kevin Mitnick, who was convicted for hacking into phone systems, as a
specific threat agent. Likewise, a specific lightning strike, hailstorm, or
tornado is a threat agent that is part of the threat of severe storms.
Vulnerability
- Weaknesses or faults in a system or protection mechanism that expose
information to attack or damage are known as vulnerabilities. Vulnerabilities
that have been examined, documented, and published are referred to as
well-known vulnerabilities.
Exposure
- The exposure of an information system is a single instance when the system
is open to damage. Vulnerabilities can cause an exposure to potential
damage or attack from a threat. Total exposure is the degree to which an
organization’s assets are at risk of attack from a threat..

Review Questions

PART-A
1. State the critical characteristics of information.
2. List the components used in security models.
3. Name the counter measures on threats.
4. Difference between threats and attacks.
5. Difference between threat and threat agent.
6. What are the 5 components of information system?
7. Give the functions performed by Information security for an organization.
8. Difference between vulnerability and exposure.
9. What are the 3 components of the CIA triangle? What are they used for?
10. Who is involved in the SDLC? Who leads the process?
11. How is the top-down- approach to information security superior to the
bottom-up-approach?
12. What are the types of attack?
13. What are the phases used in SDLC?
14. What is an Asset?
15. What is an Attack?
16. What is Security Blueprint?
17. What is Risk?

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam

IT2042 - Information Security 1-32

18. What is Security Model?

PART B

2. Discuss in detail NSTISSC security model.

3. What is SDLC? Illustrate the security of SDLC.
4. Explain in detail security Professionals and the organization.

Prepared by R. Manivannan, AP/CSE, EGSPEC, Nagapattinam