Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Interfacing Arduino With VGA Monitor

    Uploaded by

    Vikas Mahor
    118 views4 pages
    This document describes how to connect an Arduino Uno board to a VGA monitor to display graphics and text. It provides the required hardware, including an Arduino Uno, VGA monitor, resistors, and VGA connector. It also includes the circuit diagram and code for interfacing the Arduino with the VGA monitor using libraries to generate the video signals and allow drawing on a 160x64 pixel display.

    Original Description:

    Interfacing Arduino with VGA Monitor

    Original Title

    Interfacing Arduino with VGA Monitor

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document describes how to connect an Arduino Uno board to a VGA monitor to display graphics and text. It provides the required hardware, including an Arduino Uno, VGA monitor, resistors, and VGA connector. It also includes the circuit diagram and code for interfacing the Arduino with the VGA monitor using libraries to generate the video signals and allow drawing on a 160x64 pixel display.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    118 views4 pages

    Interfacing Arduino With VGA Monitor

    Uploaded by

    Vikas Mahor
    This document describes how to connect an Arduino Uno board to a VGA monitor to display graphics and text. It provides the required hardware, including an Arduino Uno, VGA monitor, resistors, and VGA connector. It also includes the circuit diagram and code for interfacing the Arduino with the VGA monitor using libraries to generate the video signals and allow drawing on a 160x64 pixel display.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    Interfacing Arduino with VGA Monitor

    This post shows how to connect VGA monitor with Arduino UNO board in order to draw
    shapes (lines, circles …) and print texts with resolution of 160×64 pixel.
    VGA: Video Graphics Array

    Hardware required:
     Arduino UNO board
     VGA monitor
     2 x 68 ohm resistor
     220 ohm resistor
     VGA connector
     Breadboard
     Jumper wires

    Interfacing Arduino with VGA monitor circuit:


    Example circuit diagram is shown below.
    HSYNC (horizontal synchronization) pin of the VGA connector (pin #13) is connected to
    Arduino digital pin 3 through 68 ohm resistor.
    VSYNC (vertical synchronization) pin of the VGA connector (#14) is connected to
    Arduino digital pin 10 through 68 ohm resistor.

    Color pins (R: red, G: green, B: blue) of the VGA connector (respectively #1, #2 and #3)
    are connected together in order to get white and black colors, they are connected to
    Arduino digital pin 7.

    Interfacing Arduino with VGA monitor code:


    The following Arduino code requires two libraries:

    The first library is a simple and small library for generating the required signals (VSYNC,
    HSYNC and video).
    The VSYNC (vertical synchronization) signal is generated on pin 10.
    The HSYNC (horizontal synchronization) signal is generated on pin 3.
    The video signal is generated on pin 7.

    Timer2 Module is configured to generate a compare match interrupt every 32


    microseconds (31.25 kHz), the horizontal synchronous pulse is generated as a PWM
    signal with frequency of 31.25 kHz. Within this interrupt the Arduino outputs vertical
    synchronization pulse and video signal.

    This library disables Timer0 interrupt which means the following functions will not work
    anymore:
    unsigned millis();
    unsigned long micros();
    void delay(ms);
    void delayMicroseconds(us);

    Instead of delay(ms) function the VGA library has an other one with the same name.

    Arduino VGA library can be downloaded from the following link:


    Arduino VGA library

    After the download of the library, put its files (VGA.h and VGA.ccp) in Arduino
    sketch folder.
    The VGA library works with Adafruit graphics library which can be downloaded
    from the following link:
    Adafruit graphics library —-> direct link

    Full Arduino code:

    /*************************************************************************
    *
    * VGA output with Arduino (white and black colors).
    * This is a free software with NO WARRANTY.
    * https://simple-circuit.com/
    *
    ************************************************************************/

    #include <Adafruit_GFX.h> // include Adafruit graphics library


    #include "VGA.h" // include VGA library

    // initialize the VGA library


    VGA display = VGA();

    void setup(void) {
    // initialize the VGA display
    display.begin();

    display.delay(5000); // wait 5 seconds


    display.clearDisplay(); // clear the screen buffer

    display.setTextSize(1);
    display.setTextColor(WHITE);
    display.setCursor(0, 0);
    display.println("Hello, world!");
    display.setTextColor(BLACK, WHITE);
    display.println(3.141592);
    display.setTextSize(2);
    display.setTextColor(WHITE);
    display.print("0x");
    display.println(0xDEADBEEF, HEX);

    display.setCursor(0, 40);
    display.setTextSize(1);
    display.print("Arduino VGA Example");
    }

    void loop() {
    ;
    }

    // end of code.

    You might also like