LABORATORY DSP

Kp. Kedep, Ds. Tlajung Udik

Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR PUTIH Testing Date : 11-Oct-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 3.5 0.4 99.6 4.0 0.4 99.6 0.4 0.4 99.6 0-5 95 - 100
2,36 mm 34.5 3.5 96.2 33.5 3.3 96.3 3.4 3.8 96.2 0 - 25 60 - 100
1,18 mm 102.5 10.3 85.9 100.0 10.0 86.3 10.1 13.9 86.1 10 - 35 30 - 100
600 μm 170.0 17.0 68.9 175.0 17.5 68.8 17.2 31.1 68.9 45 - 65 15 - 100
300 μm 399.5 40.0 29.0 405.0 40.4 28.4 40.2 71.3 28.7 70 - 90 5 - 50
150 μm 273.0 27.3 1.7 268.0 26.8 1.6 27.0 98.4 1.6 95 - 100 0 - 20
75 μm 14.0 1.4 0.3 13.0 1.3 0.3 1.3 99.7 0.3 98 - 100 0 - 5
Pan 2.5 0.3 0.0 3.0 0.3 0.0 0.3 100.0
TOTAL 999.5 100.0 1001.5 100.0 100.0

Remarks: Fineness Modulus (FM) : 218.9

2.19

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 100 100 100 100

99.6 100
100.0
96.2 95
90
86.1
80
70 68.9
PASSING (%)

60 60
50 50
40
30 28.7 30
20 20
15
10
5 5
0 0.3
0 1.6
0
1 2 3 4 5 6 7 8

SIEVE APPERTURE

Tested By : Checked By :

MASRUKUN Ika S
Inspector QC/LAB Lab/QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR HITAM Testing Date : 11-Oct-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 59.0 5.9 94.1 58.0 5.8 94.2 5.9 5.9 94.2 0-5 95 - 100
2,36 mm 110.0 11.0 83.1 116.0 11.6 82.6 11.3 17.2 82.9 0 - 25 60 - 100
1,18 mm 152.5 15.3 67.9 171.0 17.1 65.5 16.2 33.3 66.7 10 - 35 30 - 100
600 μm 204.5 20.5 47.4 216.0 21.6 43.9 21.0 54.4 45.7 45 - 65 15 - 100
300 μm 239.5 24.0 23.5 233.0 23.3 20.6 23.6 78.0 22.0 70 - 90 5 - 50
150 μm 174.5 17.5 6.0 151.0 15.1 5.5 16.3 94.3 5.8 95 - 100 0 - 20
75 μm 48.0 4.8 1.2 42.0 4.2 1.3 4.5 98.8 1.3 98 - 100 0 - 5
Pan 12.0 1.2 0.0 13.0 1.3 0.0 1.3 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: for mess 4,75 mm is out of standart Fineness Modulus (FM) : 282.9
2.83

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 100 100 100 100 100

100.0
95
94.2
90
80 82.9

70
66.7
PASSING (%)

60 60
50 50
45.7
40
30 30
20 20 22.0
15
10
5 5.8 5
0 1.3
0 0
1 2 3 4 5 6 7 8

SIEVE APPERTURE

Tested By : Checked By :

MASRUKUN Ika S
Inspector QC/LAB Lab/QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR SERAYU Testing Date : 19-Sep-19

Project : SAMPLE Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0-5 95 - 100
2,36 mm 1.0 0.1 99.9 1.0 0.1 99.9 0.1 0.1 99.9 0 - 25 60 - 100
1,18 mm 2.0 0.2 99.7 1.0 0.1 99.8 0.2 0.3 99.8 10 - 35 30 - 100
600 μm 13.5 1.4 98.4 14.5 1.5 98.4 1.4 1.7 98.4 45 - 65 15 - 100
300 μm 267.5 26.8 71.6 274.5 27.5 70.9 27.1 28.8 71.3 70 - 90 5 - 50
150 μm 541.0 54.1 17.5 543.0 54.3 16.6 54.2 83.0 17.1 95 - 100 0 - 20
75 μm 162.5 16.3 1.3 154.5 15.5 1.2 15.9 98.8 1.2 98 - 100 0 - 5
Pan 12.5 1.3 0.0 11.5 1.2 0.0 1.2 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: for mess 300 µm is out of standart Fineness Modulus (FM) : 113.7
1.14

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 98.4 99.8 99.9 100.0 100.0

90
80
70 71.3
PASSING (%)

60
50
40
30
20 17.1
10
0 1.2
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI R.N Ika S

Inspector QC/LAB Lab/QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN Testing Date : 26-Aug-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 81.5 8.2 91.9 73.0 7.3 92.7 7.7 7.7 92.3 0-5 95 - 100
2,36 mm 116.0 11.6 80.3 118.0 11.8 80.9 11.7 19.4 80.6 0 - 25 60 - 100
1,18 mm 151.5 15.2 65.1 153.5 15.4 65.6 15.3 34.7 65.3 10 - 35 30 - 100
600 μm 189.0 18.9 46.2 187.5 18.8 46.8 18.8 53.5 46.5 45 - 65 15 - 100
300 μm 231.5 23.2 23.1 227.5 22.8 24.1 23.0 76.5 23.6 70 - 90 5 - 50
150 μm 169.5 17.0 6.1 177.0 17.7 6.4 17.3 93.8 6.2 95 - 100 0 - 20
75 μm 50.0 5.0 1.1 52.5 5.3 1.1 5.1 98.9 1.1 98 - 100 0 - 5
Pan 11.0 1.1 0.0 11.0 1.1 0.0 1.1 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: for mess 4.75 mm is out of standart Fineness Modulus (FM) : 285.6
2.86

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 100.0
90 92.3

80 80.6
70
65.3
PASSING (%)

60
50
46.5
40
30
23.6
20
10
6.2
0 1.1
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

GIYOSO Ika S
Inspector QC/LAB Lab/QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO Testing Date : 27-Aug-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 7.0 0.7 99.3 8.5 0.9 99.2 0.8 0.8 99.2 0-5 95 - 100
2,36 mm 29.5 3.0 96.4 25.0 2.5 96.7 2.7 3.5 96.5 0 - 25 60 - 100
1,18 mm 160.5 16.1 80.3 164.5 16.5 80.2 16.3 19.8 80.3 10 - 35 30 - 100
600 μm 265.5 26.6 53.8 268.5 26.9 53.4 26.7 46.5 53.6 45 - 65 15 - 100
300 μm 347.5 34.8 19.0 344.5 34.5 18.9 34.6 81.1 19.0 70 - 90 5 - 50
150 μm 173.5 17.4 1.7 173.0 17.3 1.6 17.3 98.4 1.6 95 - 100 0 - 20
75 μm 13.5 1.4 0.3 13.0 1.3 0.3 1.3 99.7 0.3 98 - 100 0 - 5
Pan 3.0 0.3 0.0 3.0 0.3 0.0 0.3 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 249.9

2.50

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 99.2 100.0

96.5
90
80 80.3
70
PASSING (%)

60
53.6
50
40
30
20 19.0
10
0 0.3 1.6
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

GIYOSO Ika S
Inspector QC/LAB Lab/QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : Sample pasir sukabumi Testing Date : 19-Aug-19

Project : SAMPLE Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 33.0 3.3 96.7 33.0 3.3 96.7 3.3 3.3 96.7 0-5 95 - 100
2,36 mm 45.0 4.5 92.2 52.0 5.2 91.6 4.8 8.1 91.9 0 - 25 60 - 100
1,18 mm 69.0 6.9 85.4 55.0 5.5 86.1 6.2 14.3 85.7 10 - 35 30 - 100
600 μm 146.0 14.5 70.8 111.0 11.0 75.1 12.8 27.1 72.9 45 - 65 15 - 100
300 μm 326.0 32.5 38.3 356.0 35.4 39.7 33.9 61.0 39.0 70 - 90 5 - 50
150 μm 283.0 28.2 10.2 302.0 30.0 9.7 29.1 90.1 9.9 95 - 100 0 - 20
75 μm 85.0 8.5 1.7 82.0 8.1 1.6 8.3 98.4 1.6 98 - 100 0 - 5
Pan 17.0 1.7 0.0 16.0 1.6 0.0 1.6 100.0
TOTAL 1004.0 100.0 1007.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 203.7

2.04

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 100.0
94.3
90
80 82.0
70
PASSING (%)

64.2
60
50
44.6
40
30
20 20.5
10
5.5
0 1.3
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

SAEPUDIN
Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 16-Jan-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 4.5 0.5 99.6 3.0 0.3 99.7 0.4 0.4 99.6 0-5 95 - 100
2,36 mm 34.5 3.5 96.1 45.0 4.5 95.2 4.0 4.4 95.7 0 - 25 60 - 100
1,18 mm 88.5 8.9 87.3 144.0 14.4 80.8 11.6 16.0 84.0 10 - 35 30 - 100
600 μm 174.5 17.5 69.8 223.0 22.3 58.5 19.9 35.9 64.2 45 - 65 15 - 100
300 μm 436.0 43.6 26.2 409.0 40.9 17.6 42.3 78.1 21.9 70 - 90 5 - 50
150 μm 241.0 24.1 2.1 166.0 16.6 1.0 20.4 98.5 1.6 95 - 100 0 - 20
75 μm 17.0 1.7 0.4 9.0 0.9 0.1 1.3 99.8 0.3 98 - 100 0 - 5
Pan 4.0 0.4 0.0 1.0 0.1 0.0 0.3 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 233.1

2.33

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.6 100.0
100 95.7
90 84.0
80
70 64.2
PASSING (%)

60
50
40
30 21.9
20
10
0.3 1.6
0
1 2 3 4 5 6 7 8

SIEVE APPERTURE

Tested By : Checked By :

M. Willy IKA S
Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 26-Feb-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 9.0 0.9 99.1 10.0 1.0 99.0 1.0 1.0 99.1 0-5 95 - 100
2,36 mm 72.5 7.3 91.9 69.5 7.0 92.1 7.1 8.1 92.0 0 - 25 60 - 100
1,18 mm 205.5 20.6 71.3 221.5 22.2 69.9 21.4 29.4 70.6 10 - 35 30 - 100
600 μm 280.5 28.1 43.3 288.5 28.9 41.1 28.5 57.9 42.2 45 - 65 15 - 100
300 μm 312.5 31.3 12.0 303.5 30.4 10.7 30.8 88.7 11.4 70 - 90 5 - 50
150 μm 108.0 10.8 1.2 97.0 9.7 1.0 10.3 98.9 1.1 95 - 100 0 - 20
75 μm 9.0 0.9 0.3 7.0 0.7 0.3 0.8 99.7 0.3 98 - 100 0 - 5
Pan 3.0 0.3 0.0 3.0 0.3 0.0 0.3 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 283.8

2.84

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.1 100.0
100 92.0
90
80
70.6
70
PASSING (%)

60
50 42.2
40
30
20
11.4
10
0.3 1.1
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI IKA S
Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 26-Feb-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 4.0 0.3 99.7 5.5 0.4 99.6 0.3 0.3 99.7 0-5 95 - 100
2,36 mm 47.5 3.2 96.6 49.5 3.3 96.3 3.2 3.6 96.5 0 - 25 60 - 100
1,18 mm 155.5 10.4 86.2 162.5 10.8 85.5 10.6 14.2 85.9 10 - 35 30 - 100
600 μm 254.5 17.0 69.2 253.5 16.9 68.6 16.9 31.1 68.9 45 - 65 15 - 100
300 μm 650.5 43.4 25.9 654.5 43.6 25.0 43.5 74.6 25.4 70 - 90 5 - 50
150 μm 361.5 24.1 1.8 350.0 23.3 1.6 23.7 98.3 1.7 95 - 100 0 - 20
75 μm 20.0 1.3 0.4 19.0 1.3 0.4 1.3 99.6 0.4 98 - 100 0 - 5
Pan 6.5 0.4 0.0 5.5 0.4 0.0 0.4 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 222.0

2.22

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.7 100.0
100 96.5
90 85.9
80
68.9
70
PASSING (%)

60
50
40
30 25.4
20
10 1.7
0.4
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 25-Mar-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 4.0 0.3 99.7 5.5 0.4 99.6 0.3 0.3 99.7 0-5 95 - 100
2,36 mm 47.5 3.2 96.6 49.5 3.3 96.3 3.2 3.6 96.5 0 - 25 60 - 100
1,18 mm 155.5 10.4 86.2 162.5 10.8 85.5 10.6 14.2 85.9 10 - 35 30 - 100
600 μm 254.5 17.0 69.2 253.5 16.9 68.6 16.9 31.1 68.9 45 - 65 15 - 100
300 μm 650.5 43.4 25.9 654.5 43.6 25.0 43.5 74.6 25.4 70 - 90 5 - 50
150 μm 361.5 24.1 1.8 350.0 23.3 1.6 23.7 98.3 1.7 95 - 100 0 - 20
75 μm 20.0 1.3 0.4 19.0 1.3 0.4 1.3 99.6 0.4 98 - 100 0 - 5
Pan 6.5 0.4 0.0 5.5 0.4 0.0 0.4 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 222.0

2.22

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100
90
80
70
PASSING (%)

60
50
40
30
20
10
0
1 2 3 4 5 6 7 8

SIEVE APPERTURE

Tested By : Checked By :

FANDI IKA S
Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 18-Apr-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 3.0 0.3 99.7 3.0 0.3 99.7 0.3 0.3 99.7 0-5 95 - 100
2,36 mm 29.5 3.0 96.8 25.5 2.6 97.2 2.8 3.1 97.0 0 - 25 60 - 100
1,18 mm 103.0 10.3 86.5 96.5 9.7 87.5 10.0 13.0 87.0 10 - 35 30 - 100
600 μm 198.5 19.9 66.6 198.5 19.9 67.7 19.9 32.9 67.1 45 - 65 15 - 100
300 μm 424.5 42.5 24.2 434.5 43.5 24.2 43.0 75.8 24.2 70 - 90 5 - 50
150 μm 220.0 22.0 2.2 222.0 22.2 2.0 22.1 97.9 2.1 95 - 100 0 - 20
75 μm 16.0 1.6 0.5 14.5 1.5 0.6 1.5 99.5 0.5 98 - 100 0 - 5
Pan 5.5 0.6 0.0 5.5 0.6 0.0 0.6 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 223.0

2.23

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.7 100.0
100 97.0

90 87.0

80
70 67.1
PASSING (%)

60
50
40
30 24.2
20
10 2.1
0.5
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 16-May-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 6.5 0.4 99.6 6.5 0.4 99.6 0.4 0.4 99.6 0-5 95 - 100
2,36 mm 26.5 1.8 97.8 24.5 1.6 97.9 1.7 2.1 97.9 0 - 25 60 - 100
1,18 mm 115.5 7.7 90.1 111.0 7.4 90.5 7.6 9.7 90.3 10 - 35 30 - 100
600 μm 264.0 17.6 72.5 275.0 18.4 72.2 18.0 27.7 72.3 45 - 65 15 - 100
300 μm 704.3 47.0 25.4 691.5 46.2 26.0 46.6 74.3 25.7 70 - 90 5 - 50
150 μm 349.5 23.3 2.1 362.0 24.2 1.8 23.8 98.0 2.0 95 - 100 0 - 20
75 μm 23.5 1.6 0.5 20.0 1.3 0.5 1.5 99.5 0.5 98 - 100 0 - 5
Pan 8.0 0.5 0.0 7.0 0.5 0.0 0.5 100.0
TOTAL 1497.8 100.0 1497.5 100.0 100.0

Remarks: Fineness Modulus (FM) : 212.3

2.12

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

97.9 99.6 100.0
100
90.3
90
80 72.3
70
PASSING (%)

60
50
40
30 25.7
20
10 2.0
0.5
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 24-Jun-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 4.0 0.4 99.6 6.0 0.6 99.4 0.5 0.5 99.5 0-5 95 - 100
2,36 mm 36.5 3.7 96.0 43.0 4.3 95.1 4.0 4.5 95.5 0 - 25 60 - 100
1,18 mm 119.5 12.0 84.0 139.5 14.0 81.2 13.0 17.4 82.6 10 - 35 30 - 100
600 μm 230.5 23.1 61.0 242.5 24.3 56.9 23.7 41.1 58.9 45 - 65 15 - 100
300 μm 422.5 42.3 18.7 393.5 39.4 17.6 40.8 81.9 18.1 70 - 90 5 - 50
150 μm 173.5 17.4 1.3 161.0 16.1 1.5 16.7 98.6 1.4 95 - 100 0 - 20
75 μm 10.0 1.0 0.3 10.0 1.0 0.5 1.0 99.6 0.4 98 - 100 0 - 5
Pan 3.5 0.4 0.0 4.5 0.5 0.0 0.4 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 244.0

2.44

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.5 100.0
100 95.5
90 82.6
80
70
58.9
PASSING (%)

60
50
40
30
18.1
20
10
0.4 1.4
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 24-Jun-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm -1.0 -0.1 100.1 0.0 0.0 100.0 -0.1 -0.1 100.1 0-5 95 - 100
2,36 mm 20.5 2.1 98.1 20.5 2.1 98.0 2.1 2.0 98.0 0 - 25 60 - 100
1,18 mm 71.5 7.2 90.9 77.0 7.7 90.3 7.4 9.4 90.6 10 - 35 30 - 100
600 μm 183.5 18.4 72.6 181.5 18.2 72.1 18.3 27.7 72.3 45 - 65 15 - 100
300 μm 438.0 43.8 28.8 444.5 44.5 27.7 44.1 71.8 28.2 70 - 90 5 - 50
150 μm 266.0 26.6 2.1 257.0 25.7 2.0 26.2 98.0 2.1 95 - 100 0 - 20
75 μm 16.0 1.6 0.5 14.0 1.4 0.5 1.5 99.5 0.6 98 - 100 0 - 5
Pan 5.5 0.6 0.0 5.5 0.6 0.0 0.6 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 208.8

2.09

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

98.0 100.0
100
90.6
90
80 72.3
70
PASSING (%)

60
50
40
28.2
30
20
10 2.1
0.6
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. IKA S
Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : IRPAU HERO (PMT) Testing Date : 7-Dec-17

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 1.5 0.2 99.9 1.5 0.2 99.9 0.2 0.2 99.9 0-5 95 - 100
2,36 mm 29.0 2.9 97.0 31.0 3.1 96.8 3.0 3.2 96.9 0 - 25 60 - 100
1,18 mm 79.5 8.0 89.0 104.0 10.4 86.4 9.2 12.3 87.7 10 - 35 30 - 100
600 μm 190.0 19.0 70.0 206.0 20.6 65.8 19.8 32.1 67.9 45 - 65 15 - 100
300 μm 478.5 47.9 22.2 450.5 45.1 20.7 46.5 78.6 21.4 70 - 90 5 - 50
150 μm 191.5 19.2 3.0 181.0 18.1 2.6 18.6 97.2 2.8 95 - 100 0 - 20
75 μm 21.5 2.2 0.8 18.5 1.9 0.7 2.0 99.2 0.8 98 - 100 0 - 5
Pan 8.5 0.9 0.0 7.5 0.8 0.0 0.8 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 223.5

2.24

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.9 100.0
100 96.9
87.7
90
80
67.9
70
PASSING (%)

60
50
40
30
21.4
20
10 2.8
0.8
0
1 2 3 4 5 6 7 8

SIEVE APPERTURE

Tested By : Checked By :

SAEPUDIN RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 17-Jul-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 45.0 4.5 95.5 47.0 4.7 95.3 4.6 4.6 95.4 0-5 95 - 100
2,36 mm 92.0 9.2 86.3 107.0 10.7 84.6 10.0 14.6 85.5 0 - 25 60 - 100
1,18 mm 163.0 16.3 70.0 153.0 15.3 69.3 15.8 30.4 69.7 10 - 35 30 - 100
600 μm 203.0 20.3 49.7 196.0 19.6 49.7 20.0 50.3 49.7 45 - 65 15 - 100
300 μm 274.0 27.4 22.3 249.0 24.9 24.8 26.2 76.5 23.6 70 - 90 5 - 50
150 μm 168.0 16.8 5.5 177.0 17.7 7.1 17.3 93.7 6.3 95 - 100 0 - 20
75 μm 44.0 4.4 1.1 55.0 5.5 1.6 5.0 98.7 1.4 98 - 100 0 - 5
Pan 11.0 1.1 0.0 16.0 1.6 0.0 1.4 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: For mess 4.750 mm is out of standard Fineness Modulus (FM) : 270.0
2.70

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100.0
100 94.3
90 82.0
80
70 64.2
PASSING (%)

60
50 44.6
40
30
20.5
20
10 5.5
1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 24-Jun-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 58.0 5.8 94.2 61.0 6.1 93.9 6.0 6.0 94.1 0-5 95 - 100
2,36 mm 94.0 9.4 84.8 90.0 9.0 84.9 9.2 15.2 84.9 0 - 25 60 - 100
1,18 mm 150.0 15.0 69.8 142.0 14.2 70.7 14.6 29.8 70.3 10 - 35 30 - 100
600 μm 199.0 19.9 49.9 189.0 18.9 51.8 19.4 49.2 50.9 45 - 65 15 - 100
300 μm 268.0 26.8 23.1 262.0 26.2 25.6 26.5 75.7 24.4 70 - 90 5 - 50
150 μm 170.0 17.0 6.1 187.0 18.7 6.9 17.9 93.5 6.5 95 - 100 0 - 20
75 μm 46.0 4.6 1.5 53.0 5.3 1.6 5.0 98.5 1.6 98 - 100 0 - 5
Pan 15.0 1.5 0.0 16.0 1.6 0.0 1.6 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: For mess 4.750 mm is out of standard Fineness Modulus (FM) : 269.2
2.69

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100.0
100 94.3
90 82.0
80
70 64.2
PASSING (%)

60
50 44.6
40
30
20.5
20
10 5.5
1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 16-May-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 87.5 5.8 94.2 86.0 5.7 94.3 5.7 5.7 94.3 0-5 95 - 100
2,36 mm 185.0 12.2 82.0 187.5 12.4 82.0 12.3 18.0 82.0 0 - 25 60 - 100
1,18 mm 272.0 18.0 64.0 265.0 17.5 64.5 17.7 35.8 64.2 10 - 35 30 - 100
600 μm 300.0 19.8 44.2 295.0 19.5 45.0 19.6 55.4 44.6 45 - 65 15 - 100
300 μm 364.0 24.1 20.2 366.5 24.2 20.8 24.1 79.5 20.5 70 - 90 5 - 50
150 μm 223.0 14.7 5.4 232.0 15.3 5.5 15.0 94.5 5.5 95 - 100 0 - 20
75 μm 62.0 4.1 1.3 64.5 4.3 1.3 4.2 98.7 1.3 98 - 100 0 - 5
Pan 20.0 1.3 0.0 19.0 1.3 0.0 1.3 100.0
TOTAL 1513.5 100.0 1515.5 100.0 100.0

Remarks: For mess 4.750 mm is out of standard Fineness Modulus (FM) : 289.0
2.89

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100.0
100 94.3
90 82.0
80
70 64.2
PASSING (%)

60
50 44.6
40
30
20.5
20
10 5.5
1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 11-Apr-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 69.0 4.6 95.4 79.0 5.3 94.7 4.9 4.9 95.1 0-5 95 - 100
2,36 mm 177.0 11.8 83.6 179.0 11.9 82.8 11.9 16.8 83.2 0 - 25 60 - 100
1,18 mm 273.0 18.2 65.4 283.0 18.9 63.9 18.5 35.3 64.7 10 - 35 30 - 100
600 μm 281.0 18.7 46.7 296.0 19.7 44.2 19.2 54.6 45.4 45 - 65 15 - 100
300 μm 372.5 24.8 21.8 371.0 24.7 19.5 24.8 79.4 20.7 70 - 90 5 - 50
150 μm 248.0 16.5 5.3 226.0 15.1 4.4 15.8 95.2 4.9 95 - 100 0 - 20
75 μm 63.5 4.2 1.1 53.0 3.5 0.9 3.9 99.0 1.0 98 - 100 0 - 5
Pan 16.0 1.1 0.0 13.0 0.9 0.0 1.0 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: For mess 4.750 mm is out of standard Fineness Modulus (FM) : 286.1
2.86

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100.0
100 95.1
90 83.2
80
70 64.7
PASSING (%)

60
50 45.4
40
30
20.7
20
10 4.9
1.0
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI N. R. RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 25-Mar-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 31.0 2.1 97.9 30.0 2.0 98.0 2.0 2.0 98.0 0-5 95 - 100
2,36 mm 138.0 9.2 88.7 153.0 10.2 87.8 9.7 11.7 88.3 0 - 25 60 - 100
1,18 mm 286.0 19.1 69.7 293.0 19.5 68.3 19.3 31.0 69.0 10 - 35 30 - 100
600 μm 339.0 22.6 47.1 340.0 22.7 45.6 22.6 53.7 46.3 45 - 65 15 - 100
300 μm 414.0 27.6 19.5 403.0 26.9 18.7 27.2 80.9 19.1 70 - 90 5 - 50
150 μm 210.0 14.0 5.5 201.0 13.4 5.3 13.7 94.6 5.4 95 - 100 0 - 20
75 μm 62.0 4.1 1.3 62.0 4.1 1.2 4.1 98.7 1.3 98 - 100 0 - 5
Pan 20.0 1.3 0.0 18.0 1.2 0.0 1.3 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 274.0

2.74

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

98.0 100.0
100
88.3
90
80
69.0
70
PASSING (%)

60
50 46.3
40
30
19.1
20
10 5.4
1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

Fandi RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 10-Feb-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 16.0 1.6 98.4 35.0 3.5 96.5 2.6 2.6 97.5 0-5 95 - 100
2,36 mm 140.0 14.0 84.4 131.0 13.1 83.4 13.6 16.1 83.9 0 - 25 60 - 100
1,18 mm 152.0 15.2 69.2 152.0 15.2 68.2 15.2 31.3 68.7 10 - 35 30 - 100
600 μm 204.0 20.4 48.8 191.0 19.1 49.1 19.8 51.1 49.0 45 - 65 15 - 100
300 μm 245.0 24.5 24.3 246.0 24.6 24.5 24.6 75.6 24.4 70 - 90 5 - 50
150 μm 187.0 18.7 5.6 186.0 18.6 5.9 18.7 94.3 5.8 95 - 100 0 - 20
75 μm 47.0 4.7 0.9 48.0 4.8 1.1 4.8 99.0 1.0 98 - 100 0 - 5
Pan 9.0 0.9 0.0 11.0 1.1 0.0 1.0 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 270.9

2.71

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

97.5 100.0
100
90 83.9
80
68.7
70
PASSING (%)

60
49.0
50
40
30 24.4
20
10 5.8
1.0
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 10-Feb-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 66.0 6.6 93.4 55.0 5.5 94.5 6.0 6.0 94.0 0-5 95 - 100
2,36 mm 114.0 11.3 82.1 111.0 11.1 83.4 11.2 17.2 82.8 0 - 25 60 - 100
1,18 mm 152.0 15.1 67.0 152.0 15.2 68.2 15.1 32.4 67.6 10 - 35 30 - 100
600 μm 187.0 18.6 48.5 191.0 19.1 49.1 18.8 51.2 48.8 45 - 65 15 - 100
300 μm 245.0 24.3 24.1 246.0 24.6 24.5 24.5 75.7 24.3 70 - 90 5 - 50
150 μm 187.0 18.6 5.6 186.0 18.6 5.9 18.6 94.3 5.7 95 - 100 0 - 20
75 μm 47.0 4.7 0.9 48.0 4.8 1.1 4.7 99.0 1.0 98 - 100 0 - 5
Pan 9.0 0.9 0.0 11.0 1.1 0.0 1.0 100.0
TOTAL 1007.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 276.8

2.77

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100.0
100 94.0
90 82.8
80
67.6
70
PASSING (%)

60
48.8
50
40
30 24.3
20
10 5.7
1.0
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

JUHADI RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CIWARINGIN (GALUNGGUNG) Testing Date : 11-Jan-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 61.0 6.1 93.9 56.0 5.6 94.4 5.9 5.9 94.2 0-5 95 - 100
2,36 mm 201.0 20.1 73.8 198.0 19.8 74.6 20.0 25.8 74.2 0 - 25 60 - 100
1,18 mm 179.0 17.9 55.9 183.0 18.3 56.3 18.1 43.9 56.1 10 - 35 30 - 100
600 μm 171.0 17.1 38.8 176.0 17.6 38.7 17.4 61.3 38.8 45 - 65 15 - 100
300 μm 189.0 18.9 19.9 188.0 18.8 19.9 18.9 80.1 19.9 70 - 90 5 - 50
150 μm 141.0 14.1 5.8 147.0 14.7 5.2 14.4 94.5 5.5 95 - 100 0 - 20
75 μm 44.0 4.4 1.4 41.0 4.1 1.1 4.3 98.8 1.3 98 - 100 0 - 5
Pan 14.0 1.4 0.0 11.0 1.1 0.0 1.3 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: For mess 4.750 mm is out of standard Fineness Modulus (FM) : 311.4
3.11

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100.0
100 94.2
90
80 74.2
70
PASSING (%)

60 56.1
50
38.8
40
30
19.9
20
10 5.5
1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

JUHADI RIA UTAMI

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : Pasir putih BP Testing Date : 1-Mar-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 7.0 0.7 99.3 4.0 0.4 99.6 0.6 0.6 99.5 0-5 95 - 100
2,36 mm 80.0 8.0 91.3 72.0 7.2 92.4 7.6 8.2 91.9 0 - 25 60 - 100
1,18 mm 194.0 19.4 71.9 196.0 19.6 72.8 19.5 27.7 72.4 10 - 35 30 - 100
600 μm 232.0 23.2 48.7 230.0 23.0 49.8 23.1 50.8 49.3 45 - 65 15 - 100
300 μm 319.5 32.0 16.8 329.5 33.0 16.9 32.5 83.2 16.8 70 - 90 5 - 50
150 μm 148.5 14.9 1.9 149.0 14.9 1.9 14.9 98.1 1.9 95 - 100 0 - 20
75 μm 16.5 1.7 0.2 16.5 1.7 0.3 1.7 99.7 0.3 98 - 100 0 - 5
Pan 2.5 0.3 0.0 3.0 0.3 0.0 0.3 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Terdapat Kaolin,walaupun sedikit Fineness Modulus (FM) : 268.4

2.68

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.5 100.0
100 91.9
90
80 72.4
70
PASSING (%)

60
49.3
50
40
30
20 16.8

10 1.9
0.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Checked By :

Ria Utami
Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : Pasir putih HD Testing Date : 2-Mar-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0-5 95 - 100
2,36 mm 14.0 1.4 98.6 18.0 1.8 98.2 1.6 1.6 98.4 0 - 25 60 - 100
1,18 mm 129.0 12.9 85.7 121.0 12.1 86.1 12.5 14.1 85.9 10 - 35 30 - 100
600 μm 200.0 20.0 65.7 208.0 20.8 65.3 20.4 34.5 65.5 45 - 65 15 - 100
300 μm 415.5 41.6 24.2 413.5 41.4 24.0 41.5 76.0 24.1 70 - 90 5 - 50
150 μm 228.0 22.8 1.3 227.0 22.7 1.3 22.8 98.7 1.3 95 - 100 0 - 20
75 μm 11.5 1.2 0.2 10.5 1.1 0.2 1.1 99.8 0.2 98 - 100 0 - 5
Pan 2.0 0.2 0.0 2.0 0.2 0.0 0.2 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 224.9

2.25

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

98.4 100.0 100.0
100
90 85.9
80
70 65.5
PASSING (%)

60
50
40
30 24.1
20
10
0.2 1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Checked By :

Ria Utami
Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : Irpau hero PMV Testing Date : 2-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 7.0 0.5 99.5 6.0 0.4 99.6 0.4 0.4 99.6 0-5 95 - 100
2,36 mm 107.0 7.1 92.4 93.5 6.4 93.2 6.8 7.2 92.8 0 - 25 60 - 100
1,18 mm 280.0 18.7 73.7 272.5 18.8 74.4 18.7 25.9 74.1 10 - 35 30 - 100
600 μm 343.0 22.9 50.9 330.5 22.7 51.7 22.8 48.7 51.3 45 - 65 15 - 100
300 μm 534.0 35.6 15.3 509.0 35.0 16.6 35.3 84.0 16.0 70 - 90 5 - 50
150 μm 209.5 14.0 1.3 221.0 15.2 1.4 14.6 98.6 1.4 95 - 100 0 - 20
75 μm 15.5 1.0 0.3 16.5 1.1 0.3 1.1 99.7 0.3 98 - 100 0 - 5
Pan 4.5 0.3 0.0 4.0 0.3 0.0 0.3 100.0
TOTAL 1500.5 100.0 1453.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 265.0

2.65

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 100 100 100 100
100 99.6 100
100.0
92.8 95
90
80
74.1
70
PASSING (%)

60 60
50
50 51.3
40
30 30
20
20
16.0 15
10 5
5
0 0.3
0 1.4
0
1 2 3 4 5 6 7 8

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : Pasir putih HD (CV Sarana MM) Testing Date : 10-Apr-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 0.5 0.1 100.0 0.5 0.1 100.0 0.1 0.1 100.0 0-5 95 - 100
2,36 mm 17.0 1.7 98.3 17.0 1.7 98.3 1.7 1.8 98.3 0 - 25 60 - 100
1,18 mm 97.0 9.7 88.6 96.0 9.6 88.7 9.7 11.4 88.6 10 - 35 30 - 100
600 μm 202.5 20.3 68.3 200.0 20.0 68.7 20.1 31.5 68.5 45 - 65 15 - 100
300 μm 529.5 53.0 15.4 529.5 53.0 15.7 53.0 84.5 15.5 70 - 90 5 - 50
150 μm 135.0 13.5 1.9 139.5 14.0 1.8 13.7 98.2 1.8 95 - 100 0 - 20
75 μm 14.5 1.5 0.4 13.5 1.4 0.4 1.4 99.6 0.4 98 - 100 0 - 5
Pan 4.0 0.4 0.0 4.0 0.4 0.0 0.4 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: Ada kaolin tetapi sedikit Fineness Modulus (FM) : 227.4

2.27

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

98.3 100.0 100.0
100
88.6
90
80
68.5
70
PASSING (%)

60
50
40
30
20 15.5
10 1.8
0.4
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : Pa Hendi (Belitung tipe M) Testing Date : 2-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0-5 95 - 100
2,36 mm 28.0 1.9 98.1 31.0 2.1 97.9 2.0 2.0 98.0 0 - 25 60 - 100
1,18 mm 156.0 10.4 87.7 158.0 10.5 87.4 10.5 12.4 87.6 10 - 35 30 - 100
600 μm 303.0 20.2 67.5 303.0 20.2 67.2 20.2 32.6 67.4 45 - 65 15 - 100
300 μm 782.5 52.2 15.4 780.5 52.0 15.2 52.1 84.7 15.3 70 - 90 5 - 50
150 μm 209.0 13.9 1.4 203.0 13.5 1.6 13.7 98.5 1.5 95 - 100 0 - 20
75 μm 15.5 1.0 0.4 19.5 1.3 0.3 1.2 99.6 0.4 98 - 100 0 - 5
Pan 6.0 0.4 0.0 5.0 0.3 0.0 0.4 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 230.2

2.30

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

98.0 100.0 100.0
100
87.6
90
80
70 67.4
PASSING (%)

60
50
40
30
20 15.3
10
0.4 1.5
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PT. PAP (Jambi) Testing Date : 3-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 8.0 0.5 99.5 0.3 0.3 99.7 0 100
4,75 mm 3.0 0.2 99.8 3.0 0.2 99.3 0.2 0.5 99.5 0-5 95 - 100
2,36 mm 6.0 0.4 99.4 6.0 0.4 98.9 0.4 0.9 99.1 0 - 25 60 - 100
1,18 mm 10.0 0.7 98.7 8.0 0.5 98.3 0.6 1.5 98.5 10 - 35 30 - 100
600 μm 28.0 1.9 96.9 22.0 1.5 96.9 1.7 3.1 96.9 45 - 65 15 - 100
300 μm 647.5 43.2 53.7 666.5 44.4 52.4 43.8 46.9 53.1 70 - 90 5 - 50
150 μm 742.0 49.5 4.2 730.0 48.7 3.8 49.1 96.0 4.0 95 - 100 0 - 20
75 μm 50.5 3.4 0.9 43.5 2.9 0.9 3.1 99.1 0.9 98 - 100 0 - 5
Pan 13.0 0.9 0.0 13.0 0.9 0.0 0.9 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: For mess 9.50 mm and 0.30 is out of standard Fineness Modulus (FM) : 149.1
1.49

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

96.9 98.5 99.1 99.5 99.7
100
90
80
70
PASSING (%)

60 53.1
50
40
30
20
10 4.0
0.9
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PT. PAP (Balitung tipe WTC) Testing Date : 3-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 2.0 0.2 99.8 6.0 0.6 99.4 0.4 0.4 99.6 0 100
4,75 mm 48.0 4.8 95.0 48.0 4.8 94.6 4.8 5.2 94.8 0-5 95 - 100
2,36 mm 133.0 13.3 81.7 127.0 12.7 81.9 13.0 18.2 81.8 0 - 25 60 - 100
1,18 mm 192.0 19.2 62.5 175.0 17.5 64.4 18.4 36.6 63.5 10 - 35 30 - 100
600 μm 200.0 20.0 42.5 198.0 19.8 44.6 19.9 56.5 43.6 45 - 65 15 - 100
300 μm 248.5 24.9 17.7 258.5 25.9 18.8 25.4 81.8 18.2 70 - 90 5 - 50
150 μm 136.0 13.6 4.1 148.0 14.8 4.0 14.2 96.0 4.0 95 - 100 0 - 20
75 μm 29.5 3.0 1.1 30.5 3.1 0.9 3.0 99.0 1.0 98 - 100 0 - 5
Pan 11.0 1.1 0.0 9.0 0.9 0.0 1.0 100.0
TOTAL 1000.0 100.0 1000.0 100.0 100.0

Remarks: For mess 9.50 mm and 4.75 is out of standard Fineness Modulus (FM) : 294.6
2.95

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.6
100 94.8
90 81.8
80
70 63.5
PASSING (%)

60
50 43.6
40
30
18.2
20
10 4.0
1.0
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PT. PAP (Balitung tipe LLG) Testing Date : 8-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 13.0 0.9 99.1 12.0 0.8 99.2 0.8 0.8 99.2 0 100
4,75 mm 48.0 3.2 95.9 44.0 2.9 96.3 3.1 3.9 96.1 0-5 95 - 100
2,36 mm 166.0 11.1 84.9 167.0 11.1 85.1 11.1 15.0 85.0 0 - 25 60 - 100
1,18 mm 352.0 23.5 61.4 365.0 24.3 60.8 23.9 38.9 61.1 10 - 35 30 - 100
600 μm 374.0 24.9 36.5 352.0 23.5 37.3 24.2 63.1 36.9 45 - 65 15 - 100
300 μm 342.5 22.8 13.6 340.5 22.7 14.6 22.8 85.9 14.1 70 - 90 5 - 50
150 μm 165.0 11.0 2.6 178.0 11.9 2.8 11.4 97.3 2.7 95 - 100 0 - 20
75 μm 29.5 2.0 0.7 32.5 2.2 0.6 2.1 99.4 0.6 98 - 100 0 - 5
Pan 10.0 0.7 0.0 9.0 0.6 0.0 0.6 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: For mess 9.50 mm and 4.75 is out of standard Fineness Modulus (FM) : 304.9
terdapat kaolin 3.05

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.2
100 96.1
90 85.0
80
70
61.1
PASSING (%)

60
50
40 36.9

30
20 14.1
10 2.7
0.6
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PT. PAP (Balitung tipe PSD) Testing Date : 8-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 7.0 0.5 99.5 3.0 0.2 99.8 0.3 0.3 99.7 0-5 95 - 100
2,36 mm 74.0 4.9 94.6 76.0 5.1 94.7 5.0 5.3 94.7 0 - 25 60 - 100
1,18 mm 267.0 17.8 76.8 264.0 17.6 77.1 17.7 23.0 77.0 10 - 35 30 - 100
600 μm 382.0 25.5 51.3 387.0 25.8 51.3 25.6 48.7 51.3 45 - 65 15 - 100
300 μm 554.5 37.0 14.4 563.5 37.6 13.8 37.3 85.9 14.1 70 - 90 5 - 50
150 μm 183.0 12.2 2.2 182.0 12.1 1.6 12.2 98.1 1.9 95 - 100 0 - 20
75 μm 29.5 2.0 0.2 21.5 1.4 0.2 1.7 99.8 0.2 98 - 100 0 - 5
Pan 3.0 0.2 0.0 3.0 0.2 0.0 0.2 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: terdapat batu bara Fineness Modulus (FM) : 261.4

2.61

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.7 100.0
100 94.7
90
80 77.0

70
PASSING (%)

60
51.3
50
40
30
20 14.1
10 1.9
0.2
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
 LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : CV. Tunas Maju (tipe PQ) Testing Date : 6-May-19

Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 3.0 0.2 99.8 0.1 0.1 99.9 0 100
4,75 mm 14.0 0.9 99.1 14.0 0.9 98.9 0.9 1.0 99.0 0-5 95 - 100
2,36 mm 69.0 4.6 94.5 67.0 4.5 94.4 4.5 5.6 94.4 0 - 25 60 - 100
1,18 mm 195.0 13.0 81.5 185.0 12.3 82.1 12.7 18.2 81.8 10 - 35 30 - 100
600 μm 328.0 21.9 59.6 326.0 21.7 60.3 21.8 40.0 60.0 45 - 65 15 - 100
300 μm 486.5 32.4 27.2 472.5 31.5 28.8 32.0 72.0 28.0 70 - 90 5 - 50
150 μm 363.0 24.2 3.0 379.0 25.3 3.6 24.7 96.7 3.3 95 - 100 0 - 20
75 μm 41.5 2.8 0.2 46.5 3.1 0.5 2.9 99.7 0.3 98 - 100 0 - 5
Pan 3.0 0.2 0.0 7.0 0.5 0.0 0.3 100.0
TOTAL 1500.0 100.0 1500.0 100.0 100.0

Remarks: For mess 9.50 mm is out of standard Fineness Modulus (FM) : 233.7
2.34

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.0 99.9
100 94.4
90 81.8
80
70
60.0
PASSING (%)

60
50
40
28.0
30
20
10 3.3
0.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

FANDI Ria Utami

Inspector QC/LAB Laboratory QC

file:///conversion/tmp/activity_task_scratch/633927993.xlsx
LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561

FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR HITAM SOLO Testing Date : 5-Nov-19
Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 55.0 5.5 94.5 95.0 9.5 90.5 7.5 7.5 92.5 0 100
4,75 mm 67.0 6.7 87.7 91.5 9.2 81.3 8.0 15.5 84.5 0-5 95 - 100
2,36 mm 60.0 6.0 81.7 76.0 7.6 73.6 6.8 22.3 77.7 0 - 25 60 - 100
1,18 mm 99.5 10.0 71.7 108.0 10.8 62.8 10.4 32.8 67.2 10 - 35 30 - 100
600 μm 164.0 16.5 55.2 154.5 15.5 47.3 16.0 48.8 51.2 45 - 65 15 - 100
300 μm 217.0 21.8 33.4 194.0 19.5 27.8 20.6 69.4 30.6 70 - 90 5 - 50
150 μm 172.5 17.3 16.1 147.0 14.8 13.0 16.1 85.5 14.5 95 - 100 0 - 20
75 μm 96.0 9.6 6.4 84.0 8.4 4.6 9.0 94.5 5.5 98 - 100 0 - 5
Pan 64.0 6.4 0.0 45.5 4.6 0.0 5.5 100.0
TOTAL 995.0 100.0 995.5 100.0 100.0

Remarks: For mess 9.50 mm and 4.75mm is out of standard Fineness Modulus (FM) : 281.7
2.82

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

100 92.5
90 84.5
77.7
80
70 67.2
PASSING (%)

60
51.2
50
40
30.6
30
20 14.5
10 5.5
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

MASRUKUN SUDRAJAT
Inspector QC/LAB Laboratory QC
LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561

FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR PONTIANAK Testing Date : 12-Nov-19
Project : Sample Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 10.0 0.7 99.3 10.0 0.7 99.3 0.7 0.7 99.3 0-5 95 - 100
2,36 mm 45.0 3.0 96.3 45.0 3.0 96.4 3.0 3.6 96.4 0 - 25 60 - 100
1,18 mm 190.0 12.6 83.7 188.0 12.5 83.9 12.5 16.2 83.8 10 - 35 30 - 100
600 μm 374.0 24.8 58.9 368.0 24.4 59.5 24.6 40.8 59.2 45 - 65 15 - 100
300 μm 626.5 41.6 17.3 640.5 42.5 17.0 42.0 82.8 17.2 70 - 90 5 - 50
150 μm 238.0 15.8 1.5 236.0 15.6 1.4 15.7 98.6 1.4 95 - 100 0 - 20
75 μm 18.5 1.2 0.3 16.5 1.1 0.3 1.2 99.7 0.3 98 - 100 0 - 5
Pan 4.0 0.3 0.0 4.0 0.3 0.0 0.3 100.0
TOTAL 1506.0 100.0 1508.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 242.7

2.43

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.3 100.0
100 96.4
90 83.8
80
70
59.2
PASSING (%)

60
50
40
30
20 17.2

10
0.3 1.4
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :
 MASRUKUN SUDRAJAT
Inspector QC/LAB Laboratory QC
LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR JAMBI Testing Date : 12-Nov-09

Project : TEST ROUTIN Standard : AS-2758.

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 3.0 0.2 99.8 2.0 0.1 99.9 0.2 0.2 99.8 0-5 95 - 100
2,36 mm 9.5 0.6 99.2 9.5 0.6 99.2 0.6 0.8 99.2 0 - 25 60 - 100
1,18 mm 49.5 3.3 95.9 48.5 3.2 96.0 3.3 4.1 95.9 10 - 35 30 - 100
600 μm 203.0 13.5 82.4 209.3 13.9 82.1 13.7 17.7 82.3 45 - 65 15 - 100
300 μm 896.0 59.6 22.8 907.5 60.2 22.0 59.9 77.6 22.4 70 - 90 5 - 50
150 μm 298.5 19.8 3.0 288.5 19.1 2.8 19.5 97.1 2.9 95 - 100 0 - 20
75 μm 34.0 2.3 0.7 31.5 2.1 0.7 2.2 99.3 0.7 98 - 100 0 - 5
Pan 10.5 0.7 0.0 11.0 0.7 0.0 0.7 100.0
TOTAL 1504.0 100.0 1507.8 100.0 100.0

Remarks: Fineness Modulus (FM) : 197.5

1.97

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

99.2 99.8 100.0
100 95.9
90 82.3
80
70
PASSING (%)

60
50
40
30 22.4
20
10 2.9
0.7
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

MASRUKUN SUDRAJAT
Inspector QC/LAB Laboratory QC
LABORATORY DSP
Kp. Kedep, Ds. Tlajung Udik
Gn. Putri - Bogor Ph. 8670560 - 8670561
FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR PUTIH (WARNA COKLAT) Testing Date : 14-Nov-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 4.0 0.2 99.8 5.0 0.2 99.8 0.2 0.2 99.8 0-5 95 - 100
2,36 mm 44.0 2.2 97.6 48.0 2.4 97.4 2.3 2.5 97.5 0 - 25 60 - 100
1,18 mm 303.0 15.1 82.5 311.0 15.5 81.8 15.3 17.8 82.2 10 - 35 30 - 100
600 μm 713.0 35.6 46.9 709.0 35.4 46.4 35.5 53.3 46.7 45 - 65 15 - 100
300 μm 735.0 36.7 10.2 725.0 36.2 10.2 36.4 89.8 10.2 70 - 90 5 - 50
150 μm 178.0 8.9 1.3 178.0 8.9 1.3 8.9 98.7 1.3 95 - 100 0 - 20
75 μm 20.0 1.0 0.3 22.0 1.1 0.2 1.0 99.7 0.3 98 - 100 0 - 5
Pan 7.0 0.3 0.0 5.0 0.2 0.0 0.3 100.0
TOTAL 2004.0 100.0 2003.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 262.3

2.62

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

97.5 99.8 100.0
100
90 82.2
80
70
PASSING (%)

60
50 46.7

40
30
20
10.2
10
0.3 1.3
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :

Masrukun Sudrajat
Inspector QC/LAB Laboratory QC
 PT.SUPER BETON PRIMA
ALAMAT : JL.JALUR DUA SIMPANG KANDIS NO.59 E, RT 026/RW 001
KELURAHAN SUMBERJAYA, KECAMATAN KAMPUNG MELAYU, BENGKULU KOTA
TELP :07365500862
E-mail : superbetonprima@gmail.com

FORM-QC-01.13 Rev : 01, Tgl : 21 Juni 10

SIEVE ANALISYS OF FINE AGGREGATE (SAND)

Source : PASIR PUTIH(warna putih) Testing Date : 18-Nov-19

Project : TEST ROUTIN Standard : AS-2758.1-1998

SAMPLE 1 SAMPLE 2 AVERAGE STANDARD

Sieve Mass (%) (%) Mass (%) (%) (%) (%) (%) (%) (%)
Apperture Retained Re- Passing Retained Re- Passing Re- Cum. Passing Cum. Passing
(grams) tained (grams) tained tained Retained Retained
9,50 mm 0.0 0.0 100.0 0.0 0.0 100.0 0.0 0.0 100.0 0 100
4,75 mm 6.0 0.4 99.6 2.0 0.1 99.9 0.3 0.3 99.7 0-5 95 - 100
2,36 mm 34.0 2.2 97.4 30.0 2.0 97.9 2.1 2.4 97.6 0 - 25 60 - 100
1,18 mm 125.0 8.2 89.2 121.0 8.1 89.8 8.1 10.5 89.5 10 - 35 30 - 100
600 μm 229.0 15.0 74.2 225.0 15.0 74.8 15.0 25.5 74.5 45 - 65 15 - 100
300 μm 643.0 42.0 32.2 647.0 43.1 31.7 42.6 68.1 31.9 70 - 90 5 - 50
150 μm 460.0 30.1 2.2 452.0 30.1 1.5 30.1 98.2 1.8 95 - 100 0 - 20
75 μm 30.0 2.0 0.2 20.0 1.3 0.2 1.6 99.8 0.2 98 - 100 0 - 5
Pan 3.0 0.2 0.0 3.0 0.2 0.0 0.2 100.0
TOTAL 1530.0 100.0 1500.0 100.0 100.0

Remarks: Fineness Modulus (FM) : 204.8

2.05

STANDARD GUIDELINE GRADING LIMITS FOR FINE AGGREGATE

97.6 99.7 100.0
100
89.5
90
80 74.5
70
PASSING (%)

60
50
40 31.9
30
20
10 1.8
0.2
0
0.075 0.150 0.300 0.600 1.180 2.360 4.750 9.500

SIEVE APPERTURE

Tested By : Checked By :
Inspector QC/LAB Laboratory Engineer