Civil Rainwater Harvesting PPT 2

JIS SCHOOL OF POLYTECHNIC
TECHNICAL PROJECT
2020
BLOCK ‘A’, PHASE-III, KALYANI,

NADIA,741235
Seminar
On
Rainwater Harvesting
REPRESENTED By: -:FROM:-
1.SUMAN BISWAS CIVIL ENGINEERING, 2ND YEARS
2.MD WAHIDDUJAMAN BISWASH
3.ARKAJIT MUKHERJEE
4.AMAN KUMAR RAHUL
CONTENT
 Introduction
 What is Rainwater Harvesting
 Why is it Important?
 Objectives of Rainwater Harvesting
 Methods of Rainwater Harvesting
 Components of the roof top rainwater harvesting
 Advantages of Rainwater Harvesting
 Disadvantages of Rainwater Harvesting
 Harvesting can begin today
 References
Introduction
 Rainwater Harvesting for saving drinking water has gained enormously
in significance as modern water saving sanitary technique.
 This can be used for private and public buildings as well as for many
industrial areas.
 Due to the storage (retention) and the usage of rainwater the water
flowing off housing estates in both reduced and delayed.
What is Rainwater Harvesting
 Water is our most precious natural resource and something that most of
us take for granted.
 We are now increasingly becoming aware of the importance of water to
our survival and its limited supply, especially in such a dry continent as
Australia.
Why is it Important?
 The harvesting of rainwater simply involves the collection of water
from surfaces on which rain falls, and subsequently storing this water
for later use.
 Normally water is collected from the roofs of buildings and stored in
rainwater tanks. This is very common in rural Australia.
 Water can also be collected in dams from rain falling on the ground and
producing runoff.
Objectives of Rainwater
Harvesting
 To meet the increasing demand of water.
 To reduce the run-off which chokes the drains?
 To avoid the flooding of roads.
 To raise the underground water table.
 To reduce groundwater pollution.
 To reduce soils erosion.
 Supplement domestic water needs.
Methods of Rainwater Harvesting
Broadly there are two ways of harvesting rainwater.
 Surface runoff harvesting

 Roof top rainwater harvesting
Roof Top rainwater harvesting
 It is a system of catching rainwater where it falls. In rooftop
harvesting, the roof becomes the catchments, and the rainwater
is collected from the roof of the house/building. It can either
be stored in a tank or diverted to artificial recharge system.
 This method is less expensive and very effective and if

implemented properly helps in augmenting the ground water
level of the area.
Components of the roof top
rainwater harvesting
 The illustrative design of the basic components of roof top
rainwater harvesting system is given in the typical schematic
diagram.
Sub Component
 Catchment
 Transportation
 First flush
 Filter
Catchment
 The surface that receives rainfall directly is the catchment of

rainwater harvesting system. It may be terrace, courtyard, or
paved or unpaved open ground.
 The terrace may be flat RCC/stone roof or sloping roof.
Therefore the catchment is the area, which actually contributes
rainwater to the harvesting system.
Transportation
 Rainwater from rooftop should be carried through down take

water pipes or drains to storage/harvesting system.
 Water pipes should be UV resistant (ISI HDPE/PVC pipes) of
required capacity.
 Water from sloping roofs could be caught through gutters and
down take pipe.
First Flush
 First flush is a device used to flush off the water received in

first shower.
 The first shower of rains needs to be flushed-off to avoid
contaminating storable/rechargeable water by the probable
contaminants of the atmosphere and the catchment roof.
 It will also help in cleaning of silt and other material
deposited on roof during dry seasons Provisions of first rain
separator should be made at outlet of each drainpipe.
Filter
 There is always some skepticism regarding Roof Top

Rainwater harvesting since doubts are raised that rainwater
may contaminate groundwater.
 There is remote possibility of this fear coming true if proper
filter mechanism is not adopted.
Advantages of Rainwater Harvesting
 Easy to Maintain
 Reducing Water Bills
 Suitable for Irrigation
 Reduces Demand on Ground Water
 Reduces Floods and Soil Erosion
 Can be Used for Several Non-drinking Purposes
Disadvantages of Rainwater Harvesting
 Unpredictable Rainfall
 Initial High Cost
 Regular Maintenance
 Certain Roof Types may Seep Chemicals or Animal
Droppings
 Storage Limits
Harvesting can begin today
 Rainwater harvesting is something that thousands of families

across the world participate in, and you could be the next to
enjoy the multitude of benefits offered with rainwater
harvesting.
 It is an easy, simple and worthwhile process, so it is only in
your best interest to take a look at rainwater harvesting and its
benefits to your home.
References
 Teacher’s
 Friends
 Books
 www.google.org
 www.wikipedia.com
JAI HIND JAI BHARAT
Stay at Home, Stay Safe

Civil Rainwater Harvesting PPT 2

Uploaded by

Copyright:

Available Formats

Civil Rainwater Harvesting PPT 2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Civil Rainwater Harvesting PPT 2

Uploaded by

Copyright:

Available Formats

JIS SCHOOL OF POLYTECHNIC

BLOCK ‘A’, PHASE-III, KALYANI,

 Surface runoff harvesting

 This method is less expensive and very effective and if

 The surface that receives rainfall directly is the catchment of

 Rainwater from rooftop should be carried through down take

 First flush is a device used to flush off the water received in

 There is always some skepticism regarding Roof Top

 Rainwater harvesting is something that thousands of families

Stay at Home, Stay Safe

You might also like