Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    WAGP-1-PAR-9A-M-SAS-99-0010 Hydrocarbons 600 ANSI C1

    Uploaded by

    tope odumboni
    This document is a specification for a West Africa Gas Pipeline Project piping system carrying hydrocarbons. It specifies piping material and components up to 30 inches including pipe, fittings, flanges, valves, and connections. Key requirements include carbon steel pipe and fittings, 600# ANSI flanges, socket welded piping below 2 inches, and a design pressure of 102.1 BARG at temperatures from -28.9 to 37.8°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WAGP-1-PAR-9A-M-SAS-99-0010 Hydrocarbons 600 ANSI C1

    Uploaded by

    tope odumboni
    19 views4 pages
    This document is a specification for a West Africa Gas Pipeline Project piping system carrying hydrocarbons. It specifies piping material and components up to 30 inches including pipe, fittings, flanges, valves, and connections. Key requirements include carbon steel pipe and fittings, 600# ANSI flanges, socket welded piping below 2 inches, and a design pressure of 102.1 BARG at temperatures from -28.9 to 37.8°C.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a specification for a West Africa Gas Pipeline Project piping system carrying hydrocarbons. It specifies piping material and components up to 30 inches including pipe, fittings, flanges, valves, and connections. Key requirements include carbon steel pipe and fittings, 600# ANSI flanges, socket welded piping below 2 inches, and a design pressure of 102.1 BARG at temperatures from -28.9 to 37.8°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views4 pages

    WAGP-1-PAR-9A-M-SAS-99-0010 Hydrocarbons 600 ANSI C1

    Uploaded by

    tope odumboni
    This document is a specification for a West Africa Gas Pipeline Project piping system carrying hydrocarbons. It specifies piping material and components up to 30 inches including pipe, fittings, flanges, valves, and connections. Key requirements include carbon steel pipe and fittings, 600# ANSI flanges, socket welded piping below 2 inches, and a design pressure of 102.1 BARG at temperatures from -28.9 to 37.8°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    By mrbabi at 1:03 pm, 3/7/05

    West African Gas Pipeline Company,


    Ltd.
    HYDROCARBONS
    600# ANSI
    C1

    WAGP-1-PAR-9A-M-SAS-99-0010

    Please note that the “Document Control No.” (above and below) shall be used to refer to this
    document henceforth from 2 March, 2005.
    Correspondence dated prior to 2 March, 2005 may refer to this document using the “ITT
    Document No.” (below).

    1 5/19/05 IPR Procurement - - MR


    0 3/1/05 Addition of Document Control No. Only GF GF RG
    REV DATE DESCRIPTION ORIG CHK APPR

    Project Activities Originator Area Discipline Document System Seq.


    Document Control No. Type Code No.
    WAGP 1 PAR 9A M SAS 99 0010
    ITT Document No. WAGP-P-P-SA-0012- Rev. 0
    (Old) 0
    HYDROCARBONS

    600# ANSI

    C1
    PARAGON
    ENGINEERING SERVICES

    Specification No.: WAGP-P-P-SA-0012-0

    Paragon Project Number A2089


    Revision: A B C 0
    Issued for Client
    Description: Issued for Design Issued for Design Issued for Tender
    Review
    Prepared By: JHG JHG JHG JHG
    Check By: BTB BTB BTB BTB
    Dept. Check By: - - - CS
    Approved By: DH DH/jhg DH/jhg DH
    Date of Issue: 09 Dec 2002 04 Feb 2003 06 Feb 2003 18 Feb 2003

    WEST AFRICA GAS PIPELINE PROJECT

    SPECIFICATION NUMBER: WAGP-P-P-SA-0012-0


    SERVICE: HYDROCARBONS REV. PIPING SPEC.
    DESIGN COND: 102.1 BARG @ -28.9 TO 37.8°C (1480 PSIG @ -20 TO 0 C1
    100ºF)
    SIZE ½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 24 30
    PIPE SCHED S/160 S/80
    NIPPLES MAT’L A106 GR. B SMLS A106 GR. B SMLS
    SWAGES SPEC
    FAB. METHOD SOCKETWELD BUTT WELD
    FITTINGS 6000 PSIG A105 A 234 WPB (WALL THICKNESS TO MATCH PIPE)
    FLANGES 600# RF SW A105 600# RF WN A105 (BORE TO MATCH PIPE)
    UNIONS 6000 PSIG A105 USE FLANGES
    W/ O-RING
    CLOSURES SOLID HD. PLUG BUTT WELD CAP OR BLIND FLANGE
    OR CAP A105
    VALVE ½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 24 30
    GATE VGS-601 VGF-601
    BALL (RED) VBS-601 VBF-601
    BALL (FULL) VBS-603 VBF-602
    GLOBE VOS-601 VOF-601
    CHECK VCS-601 VCF-601/VCF-603 VCF-604
    NEEDLE VNT-1501
    VNT-1502
    SIZE (IN) ½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 24 30
    BOLTING: A193 - B7 STUDS WITH A194-2H NUTS, PTFE COATED
    1
    GASKETS: /8" (3 mm) THK. SPIRAL WOUND 304SS FLEXITALLIC "CG" OR EQUAL.
    MATERIAL NOTES:
    1. Dimensional Standards shall be in accordance with ASME B16.5 (flanges), ASME B16.9 (butt weld fittings),
    ASME B16.11 (forged steel fittings), and ASME B16.10 (valves).
    2. Reducing fitting thickness shall match heavier pipe wall thickness.
    3. Refer to Specification WAGP-P-P-SA-0016 for Valves.
    4. Socket weld ball valves must be in the open position when welded into piping to prevent damage to seating.
    5. Valves are limited for seat and seal materials. For services expected to exceed 121.1°C (250°F), valve seat
    and seal materials shall be checked for suitability and valve type designations modified as required prior to
    purchase.
    6. Instrument connections shall be screwed beyond the first block valve off of process piping.
    CODE: ASME B31.3 CORR. ALLOW. 0.06250” (1.6 mm) RATING:
    600# ANSI

    Page 2 of 3
    e:\projects\51399 - wagp\sp specifications\sp-03 current wagp specifications (word)\wagp-p-p-sa-0012-0 (hydrocarbons 600# ansi c1).doc
    BRANCH CONNECTIONS
    Branch Size Run Size
    ½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 20 24 30
    ½ T RT RT RT SL SL SL SL SL SL SL SL SL SL SL SL SL
    ¾ T RT RT SL SL SL SL SL SL SL SL SL SL SL SL SL
    1 T RT RT SL SL SL SL SL SL SL SL SL SL SL SL
    1½ T RT RT SL SL SL SL SL SL SL SL SL SL SL
    2 T RT RT W W W W W W W W W W
    3 T RT RT W W W W W W W W W
    4 T RT RT W W W W W W W W
    6 T RT RT RT W W W W W W
    8 T RT RT RT RT W W W W
    10 T RT RT RT RT RT W W
    12 T RT RT RT RT RT W
    14 T RT RT RT RT W
    16 T RT RT RT RT
    18 T RT RT RT
    20 T RT RT
    24 T RT
    30 T
    RT = Reducing Tee
    T = Straight Tee
    W = Weldolet
    SL = Sockolet
    SERVICE Hydrocarbons
    DESIGN STANDARDS (Latest) ASME B31.3
    ASME B16.9
    ASME B16.10
    ASME B16.11
    ASME B16.5
    GENERAL MATERIAL Carbon Steel
    DESIGN PRESSURE 102.1 BARG @ -28.9 to 37.8°C (1480
    PSIG @ -20 to 100°F) (See Note #3)
    PRIMARY FLANGE RATING 600# ANSI RF
    DESIGN CORROSION ALLOWANCE 1.6 mm (0.06250 inches)
    PRESSURE TEMPERATURE LIMITATIONS 102.1 BARG @ -28.9 to 37.8°C (1480
    PSIG @ -20 to 100°F) (See Note #3)
    NOTE: Socketweld piping is required in this service below 2". Threaded piping is only permitted
    where socketweld devices are not available. Where threaded piping is required (Limited to
    11/2" NPT Maximum), the following shall apply:
    1. Pipe wall thickness shall be Schedule XXH minimum.
    2. Fitting ratings shall match those specified for socket weld fittings.
    3. ASME B16.5, Pipe Flanges and Flange Fittings, shall be used to derate the maximum allowable
    working pressure for temperatures from 37.8 to 343.3°C (100 to 650°F).

    Page 3 of 3
    e:\projects\51399 - wagp\sp specifications\sp-03 current wagp specifications (word)\wagp-p-p-sa-0012-0 (hydrocarbons 600# ansi c1).doc

    You might also like