HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.
HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.
HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.
HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.
HY22 is a high performance carbon and graphite filled PTFE. It produces the lowest wear rate in the range of medium to high filled grades. This premium grade provides enhanced performance Air in both lubricated and non-lubricated environments where conventional PTFE materials fail by extrusion. Low thermal expansion and good creep characteristics make it the first choice for low pressure air and hydrocarbon compressor duties. Industrial Gases
