RX 60-35/50 Electric Forklift Truck

This specification sheet, which conforms to VDI guideline 2198, provides the technical values for the standard equipment only.
Everything. Except emissions. Different tyres, other masts, the use of accessories, etc. may result in other values.

1.1 Manufacturer STILL STILL

1.2 Manufacturer’s type designation RX 60-50 (Plus)|Li-Ion RX 60-50 (Plus)/600|Li-Ion
1.2.1 Manufacturer model number 6336 6337
1.3 Drive Electric Electric
Features

1.4 Operation Seated Seated

1.5 Load capacity/load Q kg 4990 4990
1.6 Load centre c mm 500 600
1.8 Load spacing x mm 525 525
1.9 Wheel base y mm 2046 2120
2.1 Service weight incl. battery kg 7164 7768
Weights

2.2 Axle load, laden front/rear kg 10971/1183 11475/1283

2.3 Axle load, unladen front/rear kg 3457/3707 3814/3954
3.1 Tyres Superelastic Superelastic
Tyres/chassis

3.2 Tyre size front mm 355/50-15 355/50-15

3.2 Tyre size rear mm 200/75-9 (21x8-9) 225/75-10 (23x9-10)
3.5 Number of wheels (x = driven) front/rear 2x/2 2x/2
3.6 Track width front/rear b10/b11 mm 1104/920 1104/932
4.1 Tilt of mast forward/backward α/β ° 7/7 7/5
4.2 Height of mast retracted/extended h1/h4 mm 2300/3987 2399/3887
4.3 Free lift h2 mm 160 160
4.4 Lift 1 h3 mm 2980 2780
4.7 Height above protective roof (low variant) h6 mm 2333 (2243) 2348 (2253)
4.8 Seat height in relation to SIP (low variant) h7 mm 1342 1351
4.12 Coupling height h10 mm 540/415 560/435
4.19 Total length l1 mm 4111 4220
Basic dimensions

4.20 Length including fork backs l2 mm 2911 3020

4.21 Total width b1 mm 1399 1399
4.22 Fork dimensions s/e/l mm 60/130/1200 60/130/1200
4.23 Fork carriage ISO 2328, class/form A, B ISO III A ISO III A
4.24 Fork carriage width b3 mm 1310 1310
4.31 Ground clearance under mast, with load m1 mm 126 125
4.32 Ground clearance centre wheel base m2 mm 144 153
4.34.1 Working aisle width with pallet 1000 x 1200 crossways 3, 4 Ast mm 4275 4370
4.34.2 Working aisle width with pallet 800 x 1200 lengthways 3, 4 Ast mm 4475 4570
4.35 Turning radius Wa mm 2550 2645
4.36 Smallest pivoting distance b13 mm 725 729
5.1 Driving speed with load km/h 20 20
5.1 Driving speed without load km/h 20 20
5.2 Lifting speed (plus*//standard performance) with load m 0.39/0.33 0.39//0.31
5.2 Lifting speed without load m/s 0.45 0.45
5.3 Lowering speed with load m/s 0.5 0.5
5.3 Lowering speed without load m/s 0.5 0.5
5.5 Drawbar pull with load N 6800 6750
Performance data

5.5 Drawbar pull without load N 7490 7430

5.6 Max. drawbar pull (plus*//standard performance) 5 with load N 22620 // 19030 22590 // 19000
5.6 Max. drawbar pull (plus*//standard performance) 5 without load N 22660 // 19190 22560 // 19090
5.7 Gradeability with load % 9.2 8.9
5.7 Gradeability without load % 16.3 15.5
5.8 Max. gradeability (plus*//standard performance) 5 with load % 20.7 // 14.2 20.4 // 13.8
5.8 Max. gradeability (plus*//standard performance) 5 without load % 28 // 28 27.5 // 27.5
5.9 Acceleration time 15 m (plus*//standard performance) with load s 6.2 // 7.3 6.3 // 7.4
5.9 Acceleration time 15 m (plus*//standard performance) without load s 5.5 // 6.1 5.7 // 6.2
Hydraulically actuated Hydraulically actuated
5.10 Service brake disc brake disc brake
6.1 Drive motor, output with S2 60 min kW 2x11 2x11
6.2 Lifting motor, output with S3 15 % kW 25 25
6.3 Battery according to DIN 43531/35/36 A, B, C, no DIN 43536 A DIN 43536 A
Electric engine

6.4 Battery voltage U V 80 80

6.4.1 Battery capacity K5 Ah 840 (-930) 840 (-930)
6.5 Battery weight kg 2178 2178
6.6 Energy consumption EN 16796 (plus*//standard performance) kWh/h 12.0 // 11.2 12.5 // 11.7
6.7 Handling rate (plus*//standard performance) t/h 324 // 315 324 // 315
6.8 Energy consumption at handling rate (plus*//standard performance) kWh/h 11.3 // 10.8 11.8 // 11.3
10.1 Working pressure for accessory equipment bar 250 250
10.2 Oil volume for accessory equipment l 50 50
Misc.

10.7 Sound pressure level LpAZ (operator’s position) 2 dB(A) 66 66

10.7.1 Human vibrations: acceleration in accordance with EN 13059 m/s2 0.42 0.42
10.8 Trailer coupling, item/DIN type Bolt Bolt

1
The specified nominal lift takes into consideration the tyre deflection and tolerances of the tyre diameter
2
Without cab; different values with cab
3
Fork overhang not included
4
For telescopic and triplex mast
5
For the complete forklift truck system

*Plus performance = high performance variant

2 3