Ch02 3

CHAPTER 2
ENERGY, ENERGY TRANSFER, AND

GENERAL ENERGY ANALYSIS
INTRODUCTION
 If we take the entire room—including the air and the refrigerator (or fan)—as the
system, which is an adiabatic closed system since the room is well-sealed and
well-insulated,
 The only energy interaction involved is the electrical energy crossing the system
boundary and entering the room.
 As a result of the conversion of electric energy consumed by the device to heat, the
room temperature will rise.
A fan running in a
well-sealed and
well-insulated room
will raise the
temperature of air in
the room.
A refrigerator
operating with its
door open in a well-
sealed and well-
insulated room
2
FORMS OF ENERGY
 Energy can exist in numerous forms such as thermal, mechanical, kinetic,
potential, electric, magnetic, chemical, and nuclear, and their sum
constitutes the total energy, E of a system.
 Thermodynamics deals only with the change of the total energy.
 Macroscopic forms of energy: Those a system possesses as a whole
with respect to some outside reference frame, such as kinetic and potential
energies. It is related to motion and the influence of some external effects
such as gravity, magnetism, electricity, and surface tension.
 Kinetic energy, KE: The energy that a system possesses as a result
of its motion relative to some reference frame.
 Potential energy, PE: The energy that a system possesses as a result
of its elevation in a gravitational field.
 Microscopic forms of energy: Those related
to the molecular structure of a system and the
degree of the molecular activity.
 Internal energy, U: The sum of all the
microscopic forms of energy 3
• Thermodynamics provides no information about the absolute value of the
total energy.
• It deals only with the change of the total energy, which is what matters in
engineering problems.
• Thus the total energy of a system can be assigned a value of zero at some
convenient reference point.
• The change in total energy of a system is independent of the reference
point selected.
• Closed systems whose velocity and elevation of the center of gravity
remain constant during a process are frequently referred to as stationary
systems.
• The change in the total energy ΔE of a stationary system is identical to the
change in its internal energy ΔU.
At least six different forms

of
energy are encountered in
bringing power from a
nuclear plant to home:
Nuclear → thermal →
mechanical → kinetic →
magnetic → electrical 4
Some Physical Insight to Internal Energy
Related to the molecular structure and the degree of molecular activity, and can be
viewed as the sum of the kinetic and potential energies of the molecules.
Sensible energy: The portion of

the internal energy of a system
associated with the kinetic
energies of the molecules.
Latent energy: The internal
energy associated with the phase
of a system.
Chemical energy: The internal
energy associated with the atomic
bonds in a molecule.
Nuclear energy: The tremendous
amount of energy associated with
the strong bonds within the
nucleus of the atom itself.
Thermal = Sensible + Latent

Internal = Sensible + Latent + Chemical + Nuclear
5
 The total energy of a system, can be
contained or stored in a system, and thus
can be viewed as the static forms of
energy.
 The forms of energy not stored in a system
can be viewed as the dynamic forms of
energy or as energy interactions.
 The dynamic forms of energy are
recognized at the system boundary as they
cross it, and they represent the energy
gained or lost by a system during a
process.
 The only two forms of energy interactions
associated with a closed system are heat
transfer and work.
 The difference between heat transfer
and work: An energy interaction is heat
transfer if its driving force is a temperature
difference. Otherwise it is work.
 A control volume can also exchange energy via mass transfer since any
time mass is transferred into or out of a system, the energy content of the
mass is also transferred with it. 6
More on Nuclear Energy
 An atom preserves its identity during a
chemical reaction (changes of electron
structures) but loses it during a nuclear
reaction (changes in core or nucleus).
 The best known fission reaction involves the
split of the uranium atom (the U-235 isotope)
into other elements and is commonly used to
generate electricity in nuclear power plants
(440 of them in 2004, generating 363,000 MW
worldwide), to power nuclear submarines and
aircraft carriers, and even to power spacecraft
as well as building nuclear bombs.
 Nuclear energy by fusion is released when
two small nuclei combine into a larger one.
 The uncontrolled fusion reaction was achieved
in the early 1950s, but all the efforts since then
to achieve controlled fusion by massive lasers,
powerful magnetic fields, and electric currents
to generate power have failed.
7
Kinetic energy Kinetic energy per unit mass
Potential energy Potential energy per unit mass
Total energy
of a system
Energy of a system
per unit mass
Total energy
per unit mass
Mass flow rate
Energy flow rate
8
Mechanical Energy
Mechanical energy: The form of energy that can be converted to
mechanical work completely and directly by an ideal mechanical device such
as an ideal turbine.
Kinetic and potential energies: The familiar forms of mechanical energy.
𝑷 Flow energy due to
Mechanical energy of a 𝝆 pressure difference
flowing fluid per unit mass
Rate of mechanical energy

of a flowing fluid
No change in fluid density
Mechanical energy change of a fluid during incompressible flow per unit mass
Rate of mechanical energy change of a fluid during incompressible flow
9
Any other example of turbine working on pressure difference?
Steam turbines
11
ENERGY TRANSFER BY HEAT
Heat: The form of energy that is transferred between two systems (or a
system and its surroundings) by virtue of a temperature difference.
Energy can cross the boundary of a

closed system in two distinct forms:
• Heat
• work
12
ENERGY TRANSFER BY HEAT
• Energy transfer in form of heat (Q) takes place between the body
and the surrounding medium until thermal equilibrium is established.
− An energy interaction is heat only if it takes place because of a
temperature difference.
− There cannot be any heat transfer between two systems that are at
the same temperature.
• The direction of energy transfer is always

from the higher temperature body to the
lower temperature one.
• In thermodynamics, the term heat simply
means heat transfer.
− Heat is energy in transition.
− It is recognized only as it crosses the
boundary of a system.
13
Heat transfer
per unit mass
Amount of heat transfer

when heat transfer rate
changes with time
Amount of heat transfer

when heat transfer rate
is constant
• Adiabatic Process is a process during which

no heat transfer takes place.
− The system is well insulated
− Both the system and the surroundings are
at the same temperature
• Different from isothermal process
− the energy content and thus the
temperature of a system can still be
changed by other means such as work 14
Historical Background on Heat
 Kinetic theory: Treats molecules as
tiny balls that are in motion and thus
possess kinetic energy.
 Heat: The energy associated with the
random motion of atoms and
molecules.
Heat transfer mechanisms:
 Conduction: The transfer of energy
from the more energetic particles of a
substance to the adjacent less
energetic ones as a result of interaction
between particles.
 Convection: The transfer of energy
between a solid surface and the
adjacent fluid that is in motion, and it
involves the combined effects of
conduction and fluid motion.
 Radiation: The transfer of energy due
to the emission of electromagnetic
waves (or photons). 15

Ch02 3

Uploaded by

Copyright:

Available Formats

Ch02 3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ch02 3

Uploaded by

Copyright:

Available Formats

CHAPTER 2

ENERGY, ENERGY TRANSFER, AND

At least six different forms

Sensible energy: The portion of

Thermal = Sensible + Latent

Potential energy Potential energy per unit mass

Mass flow rate

Energy flow rate

Rate of mechanical energy

Rate of mechanical energy change of a fluid during incompressible flow

Energy can cross the boundary of a

• The direction of energy transfer is always

Amount of heat transfer

Amount of heat transfer

• Adiabatic Process is a process during which

You might also like