Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    Form PAUT

    Uploaded by

    Luong Ho Vu
    This phased array ultrasonic testing report documents the inspection of welds on an item or component, listing the inspection parameters, equipment used, and locations and measurements of any discontinuities found, with recommendations on acceptance or rejection. Probe types and frequencies, scanning positions, and details of any defects like cracks or porosity are included. Signatures are provided to verify the inspection and evaluation were completed according to the given standards and procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Form PAUT

    Uploaded by

    Luong Ho Vu
    143 views1 page
    This phased array ultrasonic testing report documents the inspection of welds on an item or component, listing the inspection parameters, equipment used, and locations and measurements of any discontinuities found, with recommendations on acceptance or rejection. Probe types and frequencies, scanning positions, and details of any defects like cracks or porosity are included. Signatures are provided to verify the inspection and evaluation were completed according to the given standards and procedures.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This phased array ultrasonic testing report documents the inspection of welds on an item or component, listing the inspection parameters, equipment used, and locations and measurements of any discontinuities found, with recommendations on acceptance or rejection. Probe types and frequencies, scanning positions, and details of any defects like cracks or porosity are included. Signatures are provided to verify the inspection and evaluation were completed according to the given standards and procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    143 views1 page

    Form PAUT

    Uploaded by

    Luong Ho Vu
    This phased array ultrasonic testing report documents the inspection of welds on an item or component, listing the inspection parameters, equipment used, and locations and measurements of any discontinuities found, with recommendations on acceptance or rejection. Probe types and frequencies, scanning positions, and details of any defects like cracks or porosity are included. Signatures are provided to verify the inspection and evaluation were completed according to the given standards and procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PHASED ARRAY ULTRASONIC TESTING

    REPORT
    Project Name: Report No.:
    Item / Category.:
    Client Name: Request No.:
    Procedure No: Weld Preparation:
    Acceptance Standard: Calibration, Reference Block:
    PAUT instrument type: Material: DWG No.:
    PAUT instrument: Surface Condition:
    Scanner type: Couplant: WPS No.: Page
    Matl.: SPP Date of inspection:
    Probe Wedge
    PCD/
    Skew Range Sensitivit
    Type Serial No Freq (MHz) PCS Type Serial No Angle
    (mm)/µs y (dB)
    (mm)
    PA-1(SK90)
    PA-1(SK270)
    location
    Length of defect

    reference level
    dB higher than

    Identification No.:
    (mm)
    (mm)

    Discontinuity Type of weld


    No. Welder Remark
    Thickness

    Scanning

    Start Xs
    Position

    Evaluation defect
    End Xe
    Length

    length
    Scan
    (mm)

    (mm)
    (mm)

    Joint
    No.

    ABBREVIATION: ACC: Accepted U: Under Cut PCS: Probes center seperation LF: Lack of Fusion P: Porosity
    (note: all dimensions in REJ: Rejected O/D: Outside diameter LxT: Length x thickness CR:Crater Crack SI: Slag inclusion
    millimeter)
    R/S: Re-scan C: Crack CP:Cluster Porosity LOP : Lack Of Penetrate
    CANDT
    Name: Name: Name: Name:
    Signature: Signature: Signature: Signature:

    Date: Date: Date: Date:

    You might also like