Audiority TubeModulator Manual
Audiority TubeModulator Manual
Audiority TubeModulator Manual
Tube Modulator is a collection of several tremolo, vibrato and spatial position effect circuits
ranging from the late ‘50s tube bias tremolo to the late ‘60s psychedelic vibe pedals.
Tube Modulator spatial effects includes a panner, a rotary speaker and a wide stereo “wow &
flutter” simulators.
A wide XY scope will show you the current amplitude and spatial position modulation to get
instant feedback of your settings.
Due to its nature, Tube Modulator is Colored by Design, adding a great amount of warmth and
color to your signal.
Please, read carefully both product specifications and system requirements before purchasing
any Audiority product.
1
Tube Modulator
produced by Audiority, February 2018.
Credits
Code & DSP: Luca Capozzi (Audiority Srls), February 2018.
GUI Design: Luca Capozzi
Published by Audiority Srls
Copyright © 2018 – Progsounds Limited t/a Audiority – All rights reserved.
Copyright © 2018-2021 – Audiority Srls – All rights reserved.
Specifications
- 7 Tremolo / Vibrato modes
- 3 Spatial Position effects
- 11 Waveforms LFO
- XY Scope
- Parameters Linking
- Tempo Sync
System Requirements
PC
• Windows 7 64bit or later
• Intel i5 or equivalent
• 2 GB RAM
• Screen resolution: 1024×768
• VST2, VST3, AU 64-bit host
• PT11 or higher, AAX 64-bit host
MAC (Intel)
• OSX 10.8 or later
• Intel i5 or equivalent
• 2 GB RAM
• Screen resolution: 1024×768
• VST2, VST3, AU 64-bit host
• PT11 or higher, AAX 64-bit host
MAC (Silicon)
• macOS 11.0 or later
• M1 or higher
• 2 GB RAM
• Screen resolution: 1024×768
• VST2, VST3, AU 64-bit host
• PT11 or higher, AAX 64-bit host
2
FILE LOCATIONS
Mac
All presets, license, IR files and settings are located in:
/Users/Shared/Audiority/
AAX and VST plugins will be placed in their own Audiority sub-folder located in:
PC
All presets, license, IR files and settings are located to:
C:\Users\Public\Public Documents\Audiority
AAX and VST plugins will be placed in their own Audiority sub-folder, usually located in:
3
PLUGIN ACTIVATION
Once you install and open the plugin for the first time, it will be in Demo Mode until a license file is loaded.
In Demo Mode the plugin will output 3 seconds of silence every minute.
OFFLINE ACTIVATION
If you purchased the plugin from our site, you should have received an email to download the installers and
the license file. Save the license file you got with your purchase email (or via our User Area) anywhere on
your computer.
Then, to activate the plugin, click on the Audiority logo and select “Register”. The Registration window will
pop up allowing you to load the license file you got while purchasing the plugin by clicking the “Load
License” button.
NOTE: If you purchased the plugin from one of our dealers, please check the “USER AREA AND REDEEM CODES” section below.
ONLINE ACTIVATION
If you are registered to our User Area, then you can activate the plugin online.
Insert your Username (or email address), your password and click the “Login” button. The license file will be
automatically delivered in your computer and the plugin will be activated.
4
USER AREA AND REDEEM CODES
If you purchased from one of our dealers, then you should have received an email with a redeem code. This
code is required to deposit a license in your User Area account and let you download the license file or
activate the plugin online.
If you don’t have an User Area account yet, please follow these steps:
5
2) Once registered, log in to your account by clicking the User Area section of our site. Click the REDEEM
section of your account and paste the code you received via email from our dealer.
3) After submitting the code, a license will be deposited in your account and will be shown in “MY PLUGINS”
section of your User Area.
4) Now you can click “License File” and save the license anywhere on your computer and ready to be loaded
through the plugin registration window. You can also skip this part and activate your plugin online (see
previous section of this manual).
By selecting “Settings” from the logo menu, you can change the path for Presets, License and IR folders.
You can also disable our Newsfeed from here.
Note: Please do not move the Settings folder from its default location.
6
TUBE MODULATOR PARAMETERS
TOOLBAR
The Toolbar allows you to manage the plugin presets, register the plugin and set some global parameters.
Click the AUDIORITY logo, in the top left corner of the Toolbar, to visit our website and social profiles, register the plugin, change
the interface size and customize the paths for license and preset files. The HQ button will enable oversampling, useful to reduce
aliasing when the signal saturates. Use the Randomize and Reset buttons to experiment with random presets or restoring it to its
saved version. The NOTIFICATIONS (bell) icon will show you when a new update is available and other relevant news and offers.
7
COMMON PARAMETERS
LFO Select between 11 different waveforms.
RATE Modulation speed from 0.1Hz to 10Hz. If SYNC is enabled, it ranges from 32x to 1/32nd T. If
LINK is enabled, both RATE knobs will be controlled at once.
AMOUNT Sets the depth of the effect. If LINK is enabled, both AMOUNT knobs will be controlled at
once. This will also control the depth of the XY Scope signal.
GLOBAL PARAMETERS
IN/OUT Adjust the input and output volumes by +/- 24dB.
MIX Adjust the balance between DRY and WET signal.
SYNC Sets the LFO rates to beat divisions.
LINK Links LFO Rate and Amount of both channels.
TIP
Right-click on the XY Scope to change its display mode.
8
CHANGELOG
v1.3 (June 2021)
- FIX: Noise spike when engaging Tremolo amount
- NEW: Universal 2 Binary for Apple Silicon Macs
- NEW: Improved GUI
- NEW: Global HQ
- NEW: Corner Resizer
- CHANGE: Updated Framework
9
Audiority Srls – EULA (End-User License Agreement)
The software that accompanies this license is supplied under a license agreement. By installing this software you are agreeing to the Audiority License Agreement.
If you do not agree with these terms, do not install the software. If you haven’t downloaded a license file (or used a redeem code), you may obtain a refund within
14 days through the dealer where you purchased the software, or if purchased at any of Audiority online stores, by contacting support@audiority.com.
By installing the software, you confirm your acceptance of the Audiority Srls End User License Agreement.
This is a non-exclusive, single-user License.
This End User License Agreement (“Agreement”) is between Audiority Srls and you.
IMPORTANT – PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE INSTALLING THIS SOFTWARE.
By using the Audiority Srls Software you accept these terms. The Audiority Srls Software may be distributed with software or components from third-parties
(“Third-Party Software”). Use of Third-Party Software is also subject to the terms of this EULA.
2. Title.
The Software is owned by Audiority or its Suppliers as applicable, and is protected by copyright laws and international treaty provisions, as well as other
intellectual property laws and treaties. Audiority (or its Suppliers, as applicable) retains title to and ownership of the Software and all copies, as well as any rights
not specifically granted. This Agreement only gives you certain rights to use the Software and related documentation, which may be revoked if you do not follow
these terms.
(iv) No reconfiguration.
The Software is licensed for installation and use only in the manner it was provided to you, as configured by an automated installation program provided with the
Software, or as described in Audiority’s Documentation. You may not separate the components contained in the Software or otherwise reconfigure the Software to
circumvent technical limitations on the use of the Software or to otherwise exceed the scope of your license.
5. License Transfer.
Except if otherwise stated within this EULA, Licensee may resell the software to a third party or transfer the software permanently if the Licensee purchased the
Software from any Audiority store or from any Audiority Dealer. Audiority reserves all rights to deny any requests for the transfer of this license, and may institute
transfer fees and policies as it sees fit at the time of any request for the transfer of this license, if the Licensee purchased the license from another Licensee.
By transfering a license, the third party agrees in writing with this EULA and Licensee ceases all use of the software, completely removes all installed copies of the
software from its computer and – if the software was not purchased via download – deletes or transfers the original data storage to the third party (if Licensee is
not obliged to a longer storage by law). NFR (not for resale) copies, including freeware products, free bonus products, and giveaway copies, cannot be resold.
Following respective request from Licensee via its email address registered with Audiority, and payment of the Transfer Fee, the license file of the Product will be
transferred by Audiority to the third party, and at the same time the registration of Licensee for the software purchased will be deleted. The current and updated
Transfer Fee can be found at this address https://www.audiority.com/faq/#1509113035751-cec03c9c-5c77
6. Excluded Products.
Audiority and its Suppliers give NO warranty for Software free of charge, including Software designated as “demo”, “limited release,” “pre-release,” “loan,” “beta”
or “test.” This Software is provided “AS IS.”
7. Limitation of Liability.
AUDIORITY AND ITS SUPPLIERS SHALL HAVE NO LIABILITY TO YOU WHETHER IN CONTRACT, TORT, NEGLIGENCE OR PRODUCTS LIABILITY, FOR ANY CLAIM, LOSS, OR
DAMAGE, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOSS OF USE, BUSINESS INTERRUPTION, LOST DATA, OR LOST FILES, OR FOR ANY INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE
THE SOFTWARE OR DOCUMENTATION, OR THE PERFORMANCE OR OPERATION OF THE SOFTWARE, EVEN IF AUDIORITY OR ITS SUPPLIERS HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL AUDIORITY’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES
OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE EXCEED THE AMOUNT PAID BY YOU FOR THE SOFTWARE.
10
8. Termination.
To the extent permitted by law, and without prejudice to any other rights Audiority may have, Audiority may terminate your license if you materially breach these
terms and conditions.
10. Miscellaneous.
This Agreement constitutes the entire agreement between the parties with respect to the use of the Software and Documentation, and supersedes all prior or
contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this Agreement will be
binding unless in writing and signed by a duly authorised representative of Audiority.
Should you have any questions concerning this Agreement, please contact Audiority Srls at info@audiority.com
11
Thank You
We wanna thank you for buying Audiority Tube Modulator
plugin.
info@audiority.com
Cheers,
Luca
Follow us on:
Facebook
Twitter
SoundCloud
YouTube
Instagram
Audiority User Area: (registration is required to access the UA and download installers and license files)
Audiority User Area
12