Socket Compatible and Flange Mounted Relays: Section
Socket Compatible and Flange Mounted Relays: Section
1
SOCKET COMPATIBLE
AND FLANGE MOUNTED RELAYS
781
1 TO 30 AMPERES
782
782H
783
784
750
788
283
388J/V
389/389F
300
9A/92
21
67
219
750H
PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
781 782XAX
PR ODUCT
MANUFACTURED UNDER MANUFACTURED UNDER
ISO 9002 QS 9000 ISO 9002 QS 9000
L XW X H (INCHES) 1.60 x 0.55 x 1.10 1.54 x 0.83 x 1.10
COIL UNITS
Standard Voltage AC: 50/60 Hz 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24,110 / 120, 220 / 230, 240
DC: 6, 12, 24, 48, 110 /125 6, 12, 24, 48,110 /125
Coil Power AC (60 Hz): VA 0.9 1.2
Coil Power DC: W 0.7 0.9
Insulation System Per UL Standard 1446: Class B (130ºC) Class B (130ºC)
CONTA
CONTACTS
Contact Configuration: SPDT SPDT
Contact Material: Silver alloy, gold flashed Silver alloy, gold flashed
Contact Resistance (Initial): m Ohms 50 50
Contact Rating AC Amperes (AC1): A 15 20
Contact Rating AC Voltage: V 277 277
Contact Rating DC Amperes (DC1): A 15 / 0.5 20 / 0.5
Contact Rating DC Voltage: V 28 / 220 28 /220
Horse Power (AC): Hp 1/2 @ 120 V 1/2 @ 120 V
Horse Power (AC): Hp 1 @ 250 V 1 @ 250 V
TIMING
Operate Time: ms 20 25
Release Time: ms 20 20
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 2500 2500
Insulation Resistance: megohms 100 @ 500 1000 @ 500
minimum@VDC
TEMPER ATURE
Operating, AC Lower: ºC -40 -40
Operating, AC Upper: ºC +70 +70
Operating, DC Lower: ºC -40 -40
Operating, DC Upper: ºC +70 +70
Storage, Lower: ºC -40 -40
Storage, Upper: ºC +105 +105
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 15 A: 100,000, 20 A: 50,000 100,000
Mechanical @ no Load : operations 10,000,000 10,000,000
MISCELLANEOUS
Cover Protection Category: IP 40 40
Weight: grams 29 36
MATING
MATING SOCKETS 70-781D-1, 70-781F-1, 70-781T-1 70-459-1, 70-782D-1, 70-401-1, 70-402-1
SEE SECTION 7
AGENCY
GENCY APPR OVALS
C US C US
UL Recognized UL Recognized
40787 LISTED 40787 LISTED
File No. E43641 File No. E43641
9/04
PAGE NUMBER PAGE 11 - 14 PAGE 11, 12, 13, 15
1...2
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
782XBX 783XCX 784XDX
6, 12, 24, 110 / 120, 220 / 230, 240 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24,110 / 120, 220 / 230, 240
6, 12, 24, 48, 110 /125 6, 12, 24, 48, 110 /125 6, 12, 24, 48, 110 /125
1.2 1.7 2
0.9 1.5 1.5
Class B (130ºC) CLASS B (130ºC) Class B (130ºC)
25 25 20
20 20 20
40 40 40
36 60 80
70-459-1, 70-782D-1, 70-401-1, 70-402-1 70-783D-1 70-784D-1
C US C US C US
UL Recognized UL Recognized UL Recognized
40787 LISTED 40787 LISTED 40787 LISTED
File No. E43641 File No. E43641 File No. E43641
PAGE 11, 12, 13, 16 PAGE 11, 12, 13, 17 PAGE 11, 12, 13, 18 9/04
1...3
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
782XBX1 782XBX2
& 782XDX1 & 782XDX2
PR ODUCT
MANUFACTURED UNDER MANUFACTURED UNDER
ISO 9002 QS 9000 ISO 9002 QS 9000
L XW X H (INCHES) 1.54 x 0.83 x 1.10 1.54 x 0.83 x 1.10
0.100 QUICK CONNECT/ SOLDER PLUG-IN 0.100 QUICK CONNECT/ SOLDER PLUG-IN
OR PRINTED CIRCUIT TERMINALS OR PRINTED CIRCUIT TERMINALS
FLAG INDICATOR FLAG INDICATOR
L.E.D. STATUS LAMP L.E.D. STATUS LAMP
FEATURES
FEATURES PUSH BUTTON PUSH BUTTON WITH LOCK DOWN DOOR
FINGER GRIP COVER FINGER GRIP COVER
I.D. TAG/WRITE LABEL I.D. TAG/WRITE LABEL
OPTIONAL FLANGE AND OPTIONAL FLANGE AND
DIN ADAPTERS AVAILABLE DIN ADAPTERS AVAILABLE
UL LISTED WHEN USED WITH UL LISTED WHEN USED WITH
70-461-1 SOCKET 70-461-1 SOCKET
COIL UNITS
Standard Voltage AC: 50/60 Hz 6, 12, 24, 110 / 120, 220 / 230, 240 6, 12, 24, 110 / 120, 220 / 230, 240
DC: 6, 12, 24, 48, 110 /125 6, 12, 24, 48, 110 /125
Coil Power AC (60 Hz): VA 1.2 1.2
Coil Power DC: W 0.9 0.9
Insulation System Per UL Standard 1446: Class B (130ºC) Class B (130ºC)
CONTA
CONTACTS
Contact Configuration: DPDT, 4PDT DPDT, 4PDT
Contact Material: Silver alloy, gold flashed Silver alloy, gold flashed
Contact Resistance (Initial): m Ohms 50 50
Contact Rating AC Amperes (AC1): A 3 10 / 8.0
Contact Rating AC Voltage: V 240 120 / 277
Contact Rating DC Amperes (DC1): A 3 / 0.25 8 / 0.25
Contact Rating DC Voltage: V 28 / 220 28 / 220
Horse Power (AC): Hp 1/3 @ 120 V
Horse Power (AC): Hp 1/10 @ 240 V 1 @ 277 V
TIMING
Operate Time: ms 20 20
Release Time: ms 20 20
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 1500 1500
Insulation Resistance: megohms 100 @ 500 100 @ 500
minimum@VDC
TEMPER ATURE
Operating, AC Lower: ºC -40 -40
Operating, AC Upper: ºC +70 +70
Operating, DC Lower: ºC -40 -40
Operating, DC Upper: ºC +70 +70
Storage, Lower: ºC -40 -40
Storage, Upper: ºC +105 +105
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 200,000 200,000
Mechanical @ no Load : operations 10,000,000 10,000,000
MISCELLANEOUS
Cover Protection Category: IP 40 40
Weight: grams 36 36
MATING
MATING SOCKETS 70-461-1, 70-378-1, 70-379-1 70-461-1, 70-378-1, 70-379-1
SEE SECTION 7
AGENCY
GENCY APPR OVALS
C US C US
UL Recognized UL Recognized
File No. E43641 40787 LISTED File No. E43641 40787 LISTED
9/04
PAGE NUMBER PAGE 11, 19, 20, 21, 22, 23 PAGE 11, 19, 20, 21, 22, 23
1...4
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
782XBX3 782H 750
& 782XDX3
CERTIFIED CLASS 1
DIVISION 2 FOR
HAZARDOUS LOCATIONS
0.100 QUICK CONNECT/ SOLDER PLUG-IN 0.100 SOLDER PLUG-IN TERMINALS 8 & 11 PIN OCTAL
OR PRINTED CIRCUIT TERMINALS HERMETICALLY SEALED VACUUM FLAG INDICATOR
FLAG INDICATOR BAKED AND DRY NITROGEN FILLED L.E.D. STATUS LAMP
L.E.D. STATUS LAMP GRAY LACQUER FINISH PUSH BUTTON WITH LOCK DOWN DOOR
PUSH BUTTON WITH LOCK DOWN DOOR OVER STEEL ENCLOSURE FINGER GRIP COVER
FINGER GRIP COVER MEETS UL STANDARD FOR CLASS I. D. TAG/WRITE LABEL
I.D. TAG/WRITE LABEL 1 DIVISION 2 HAZARDOUS LOCATIONS UL LISTED WHEN USED WITH
OPTIONAL FLANGE AND OPTIONAL TOP OR SIDE 70-464-1, 70-465-1, 70-750D8-1
DIN ADAPTERS AVAILABLE STUD MOUNT OR 70-750D11-1 SOCKETS
UL LISTED WHEN USED WITH UL LISTED WHEN USED WITH
70-461-1 SOCKET 70-461-1 SOCKET
6, 12, 24,110 / 120, 220 / 230, 240 6,12, 24, 110 /120, 240 6,12, 24, 110 /120, 220/ 240
6, 12, 24, 48, 110 /125 6,12, 24, 48, 110 /125 6,12, 24, 48, 110 /125
1.2 1.2 2.0 - 3.0
0.9 0.9 1.4
Class B (130ºC) Class B (130ºC) Class B (130ºC)
20 13 20
20 6 20
40 67 40
36 45 89
70-461-1, 70-378-1, 70-379-1 70-461-1, 70-378-1, 70-379-1 70-464-1, 70-465-1, 70-750D8-1, 70-750D11-1
70-750EL, 70-750E, 70-750SL
C US C US C US
UL Recognized UL Recognized UL Recognized
40787 LISTED 168986 LISTED 40787 LISTED
File No. E43641 File No. E209950 File No. E43641
PAGE 11, 19, 20, 21, 22, 23 PAGE 19 - 23 PAGE 11, 24, 25 9/04
1...5
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
788 A283
PR ODUCT
MANUFACTURED UNDER MANUFACTURED UNDER
ISO 9002 QS 9000 ISO 9002 QS 9000
L XW X H (INCHES) 2.15 x 1.37 x 1.39 1.90 x 1.53 x 1.40
COIL UNITS
Standard Voltage AC: 50/60 Hz 6,12, 24, 110 / 120, 220 / 240 6, 12, 24, 110 / 120, 220 / 240
DC: 6, 12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125
Coil Power AC (60 Hz): VA 2.0 - 3.0 2.75
Coil Power DC: W 1.4 2
Insulation System Per UL Standard 1446: Class B (130ºC) Class B (130ºC)
CONTA
CONTACTS
Contact Configuration: DPDT, 3PDT SPST, DPDT, 3PDT
Contact Material: Silver alloy, gold flashed Silver alloy, gold flashed
Contact Resistance (Initial): m Ohms 50 50
Contact Rating AC Amperes (AC1): A 16 15
Contact Rating AC Voltage: V 277 240
Contact Rating DC Amperes (DC1): A 16 / 0.5 10
Contact Rating DC Voltage: V 28 / 220 28
Horse Power (AC): Hp 1/3 @ 120 V 1/3 @ 120 V
Horse Power (AC): Hp 1/2 @ 240 V 1/2 @ 240 V
TIMING
Operate Time: ms 20 20
Release Time: ms 20 20
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 2500 2500
Insulation Resistance: megohms 1000 @ 500 100 @ 500
minimum@VDC
TEMPER ATURE
Operating, AC Lower: ºC -40 -30
Operating, AC Upper: ºC +50 +60
Operating, DC Lower: ºC -40 -30
Operating, DC Upper: ºC +65 +50
Storage, Lower: ºC -40 -30
Storage, Upper: ºC +105 +100
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 100,000 100,000
Mechanical @ no Load : operations 5,000,000 10,000,000
MISCELLANEOUS
Cover Protection Category: IP 40 40
Weight: grams 88 88
MATING
MATING SOCKETS 70-463-1, 70-124-1, 70-124-2, 70-178-1, 70-178-2, 70-463-1, 70-124-1, 70-124-2, 70-178-1, 70-178-2,
70-788EL, 70-788SL 70-788EL, 70-788SL
SEE SECTION 7
AGENCY
GENCY APPR OVALS
C US C US
UL Recognized UL Recognized
File No. E43641 40787 LISTED File No. E13224 168986 LISTED
9/04
PAGE NUMBER PAGE 11, 26, 27 PAGE 28 - 30
1...6
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
A283 DC 388J 388V
SWITCHING
6, 12, 24, 110 / 120, 220 / 240 6, 12, 24, 110 / 120, 220 / 240 6, 12, 24, 110 / 120, 220 / 240
6,12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125
2.75 2.75 2.75
2 2 2
Class B (130ºC) Class B (130ºC) Class B (130ºC)
20 20 20
20 20 20
40 40 40
88 88 88
70-463-1, 70-124-1,70-124-2, 70-178-1, 70-178-2 70-463-1, 70-124-1, 70-124-2, 70-178-1, 70-178-2 70-463-1, 70-124-1, 70-124-2 , 70-178-1, 70-178-2
70-788EL, 70-788SL 70-788EL, 70-788SL 70-788EL, 70-788SL
C US C US C US
UL Recognized UL Recognized UL Recognized
168986 LISTED 168986 LISTED File No. E43641 168986 LISTED
File No. E13224 File No. E43641
PAGE 28, 29, 31 PAGE 32, 33 PAGE 32, 34 9/04
1...7
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
389 389F 300
PR ODUCT
MANUFACTURED UNDER MANUFACTURED UNDER MANUFACTURED UNDER
ISO 9002 QS 9000 ISO 9002 QS 9000 ISO 9002 QS 9000
L XW X H (INCHES) 1.90 x 1.53 x 1.40 1.90 x 1.53 x 1.40 1.90 x 1.53 x 1.40
FLANGE MOUNT FLANGE MOUNT FLANGE MOUNT
0.250 QUICK CONNECT/ FLAG INDICATOR 0.250 QUICK CONNECT SOLDER
SOLDER TERMINALS PUSH BUTTON OR PRINTED CIRCUIT TERMINALS
SWITCHING UP SWITCHING UP VARIETY OF MOUNTING OPTIONS
FEATURES
FEATURES TO 30 AMPS TO 30 AMPS AVAILABLE INCLUDING DIN,
SOCKET MOUNT SOCKET MOUNT FLANGE AND STUD
AVAILABLE AVAILABLE 2 MILLIMETER CONTACT GAP
ARC BARRIER BETWEEN POLES
OPTIONAL BLOWOUT MAGNET
FOR HIGH VOLTAGE
DC SWITCHING
COIL UNITS
Standard Voltage AC: 50/60 Hz 6, 12, 24, 110 / 120, 220 / 240 6, 12, 24, 110 / 120, 220 / 240 6, 12, 24, 110 / 120, 220 / 240
DC: 6,12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125
Coil Power AC (60 Hz): VA 3.5 3.5 3.0
Coil Power DC: W 1.44 1.44 2.0
Insulation System Per UL Standard 1446: Class B (130ºC) Class B (130ºC) Class B (130ºC) or
CLass F (155ºC)
CONTA
CONTACTS
Contact Configuration: DPDT-NO, 3PDT-NO DPDT-NO, 3PDT-NO DPDT
Contact Material: Silver alloy, gold flashed Silver alloy, gold flashed Silver alloy, gold flashed
Contact Resistance (Initial): m Ohms 50 50 50
Contact Rating AC Amperes (AC1): A 20, 25, 30 20, 25, 30 30 / 20 / 15
Contact Rating AC Voltage: V See Table See Table 277 / 480 / 600
Contact Rating DC Amperes (DC1): A See Table See Table 30
Contact Rating DC Voltage: V See Table See Table 28
Horse Power (AC): Hp See Table See Table 1 @ 120
Horse Power (AC): Hp See Table See Table 2 @ 208 -600
TIMING
Operate Time: ms 20 20 20
Release Time: ms 20 20 15
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 1600 1600 4000
Insulation Resistance: megohms 1000 @ 500 1000 @ 500 1000 @ 500
minimum@VDC
TEMPER ATURE
Operating, AC Lower: ºC -30 -30 -30
Operating, AC Upper: ºC +65 +65 +60
Operating, DC Lower: ºC -30 -30 -30
Operating, DC Upper: ºC +50 +50 +50
Storage, Lower: ºC -30 -30 -30
Storage, Upper: ºC +100 +100 +100
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 100,000 100,000 100,000
Mechanical @ no Load : operations 5,000,000 5,000,000 10,000,000
MISCELLANEOUS
Cover Protection Category: IP 40 40 40
Weight: grams 88 88 85
MATING
MATING SOCKETS 70-788EL, 70-788SL 70-788EL, 70-788SL
SEE SECTION 7
AGENCY
GENCY APPR OVALS
C US C US C US
UL Recognized UL Recognized UL Recognized
168986 168986 50758
File No. E43641 File No. E43641 File No. E13224
1...8
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
9A 92 21 / 136
W
NE
MANUFACTURED UNDER MANUFACTURED UNDER
ISO 9002 QS 9000 ISO 9001
1.980 x 1.08 x 1.10 2.70 x 1.36 x 1.495 2.84 x 1.85 x 2.47
FLANGE MOUNT DIN/ FLANGE MOUNT TRAFFIC SIGNAL FLASH TRANSFER
0.250 SPADE TERMINALS ON CONTACTS 0.250 SPADE TERMINALS ON CONTACTS MEETS NEMA STD.
AND 0.187 SPADE TERMINALS ON COIL AND 0.187 SPADE TERMINALS ON COIL TS 2-1992 D. O. T. APPROVED
ACCEPT INSULATED QUICK CONNECT ACCEPT INSULATED QUICK CONNECT SWITCHES TUNGSTEN
CONNECTORS CONNECTORS LOADS UP TO 20 AMPS
EPOXY SEALED IMMERSION EPOXY SEALED IMMERSION MIDTEX 136 ALSO AVAILABLE
CLEANABLE CLEANABLE
24, 120, 240 24, 120, 240 6, 12, 24, 110 / 120, 220 / 240
5, 12, 24, 48, 110 / 125 5, 12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125
2.8 4 3.0
1 1.7 2.0
Class F (155ºC) Class F (155ºC) CLASS B (130ºC)
20 20 20
20 20 20
40 40 40
33 86 205
OPTIONAL DIN ADAPTER 16-9A DIN-1 70-TRF-8-1
70-TRB-8-1
C US C US C US
UL Recognized UL Recognized UL Recognized
File No. E43641 File No. E43641 File No. E43641 168986
1...9
SOCKET COMPATIBLE & FLANGE MOUNT RELAYS
67 219 750H
PR ODUCT
MANUFACTURED UNDER
ISO 9002 QS 9000
L XW X H (INCHES) 1.20 x 0.735 x 0.978 to 1.592 2.59 x1.468 x 2.625 / 3.062 1.281 x 0.910 x 1.156
CONTA
CONTACTS
Contact Configuration: DPST to 6PDT to 6PDT DPDT, 3PDT
Contact Material: Silver alloy, gold plated Silver alloy, gold diffused Silver alloy, gold flashed
Contact Resistance (Initial): m Ohms 50 75 100
Contact Rating AC Amperes (AC1): A 5/3 10 / 5 2 Pole-12, 3 Pole-10
Contact Rating AC Voltage: V 120 / 120 120 / 120 120 / 240
Contact Rating DC Amperes (DC1): A 5/3 10/5 10
Contact Rating DC Voltage: V 28 / 28 28 / 28 30
Horse Power (AC): Hp - See Table 1/3 @ 120 V
Horse Power (AC): Hp - See Table 1/2 @ 240 V
TIMING
Operate Time: ms 25 25 10
Release Time: ms 20 20 30
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 1500 1500 1250
Insulation Resistance: megohms 1000 @ 500 1000 @ 500 1000 @ 500
minimum@VDC
TEMPER ATURE
Operating, AC Lower: ºC -40 -40 -45
Operating, AC Upper: ºC +60 +80 +55
Operating, DC Lower: ºC -40 -40 -45
Operating, DC Upper: ºC +60 +80 +70
Storage, Lower: ºC -40 -40 -45
Storage, Upper: ºC +130 +130 +105
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 100,000 100,000 100,000
Mechanical @ no Load : operations 10,000,000 10,000,000 5,000,000
MISCELLANEOUS
Cover Protection Category: IP 40 40 67
Weight: grams 22 to 40 241 130
MATING
MATING SOCKETS 70-303-1, 70-305-1, 70-307-1 27390D, 33377D 70-464-1, 70-465-1
70-304-1, 70-306-1, 70-308-1 70-750D8-1, 70-750D11-1
SEE SECTION 7
AGENCY
GENCY APPR OVALS
C US C US C US
UL Recognized UL Recognized UL Recognized
File No. E52197 File No. E13224 168986 LISTED File No. E43641 LISTED
9/04
PAGE NUMBER PAGE 44, 45 PAGE 46, 47 PAGE 48, 49
1...10
HOW TO CHOOSE A PLUG -IN RELAY
SPDT 1 1 4
TYPICAL TERMINAL
(XAX) 5 5 8 SIZE IN INCHES:
1.10 MAX. 0.187 X 0.020 (LONG)
(27.9)
9 9 12
781 13 14 782
20 AMPS 13 14 20 AMPS
PAGE 14 PAGE 15
DPDT 1 4 1 4
TYPICAL TERMINAL
(XBX) 5 8 5 8 SIZE IN INCHES:
1.10 MAX. 0.110 X 0.020 (SHORT)
(27.9)
9 12 9 12
782 782
15 AMPS 13 14 UP TO 10 AMPS
PAGE 16 13 14 PAGE 21
1.21
(30.8)
3PDT 1 2 4
(XCX) 5 6 8
1.10 MAX.
9 10 12 (27.9)
783
15 AMPS 13 14
PAGE 17
4PDT 1 2 3 4 1 2 3 4
(XDX) 5 6 7 8 5 6 7 8
1.10 MAX.
9 10 12 (27.9) 9 10 11 12
11
784 782
15 AMPS 13 14 UP TO 10 AMPS
PAGE 18 13 14 PAGE 21
1.37 1.37
(34.9) (34.9)
1 3
DPDT 4 6 4 5
(XBX) 1.39 3 6 1.39
9 (35.4) (35.4)
7
2 7
1 8
788 750
16 AMPS A B 16 AMPS
PAGE 27 PAGE 25
1.37 1.37
(34.9) (34.9)
1 2 3
3PDT 4 5 6 6 7
5
(XCX) 1.39
(35.4)
4 8 1.39
7 8 9 (35.4)
3 9
2 10
1 11
788 750
16 AMPS A B 16 AMPS
PAGE 27 PAGE 25 9/04
F E AT U R E S B E N E F I T S
C US
UL Recognized SHOWS RELAY STATUS IN MANUAL OR
File No. E43641 FLAG INDICATOR:
POWERED CONDITION.
9/04
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS 781XAX 782XAX 782XBX 783 784
COIL
Pull-in Voltage AC (50/60 Hz):< % of nominal 85 85 85 85 85
Pull-in Voltage DC:< % of nominal 80 80 80 80 80
Dropout Voltage AC (50/60 Hz):> % of nominal 10 10 10 10 10
Dropout Voltage DC:> % of nominal 10 10 10 10 10
Maximum Voltage: % of nominal 110 110 110 110 110
Resistance: %± 15 15 15 15 15
Coil Power AC (60 Hz): VA 0.9 1.2 1.2 1.5 1.5
Coil Power DC: W 0.7 0.9 0.9 1.7 2
Insulation System Per UL Standard 1446: Class B (130 ºC) Class B (130 ºC) Class B (130 ºC) Class B (130 ºC) Class B (130 ºC)
Maximum Coil Dissipation, AC (60 Hz): VA 2.55 2.55 2.55 3 3
Maximum Coil Dissipation, DC: W 2.3 2.3 2.3 3.4 2.3
Duty: Continuous Continuous Continuous Continuous Continuous
CONTA
CONTACTS
Contact Material: Silver alloy, Silver alloy, Silver alloy, Silver alloy, Silver alloy,
gold flashed gold flashed gold flashed gold flashed gold flashed
Contact Rating AC Amperes (AC1): A 15 20 15 / 12 15 / 12 15 / 12
Contact Rating AC Voltage: V 277 277 120 / 277 120 / 277 120 / 277
Contact Rating DC Amperes (DC1): A 15 / 0.5 20 / 0.5 12 / 0.5 15/ 0.5 15 / 0.5
Contact Rating DC Voltage: V 28 / 220 28 / 220 28 / 220 28 / 220 28 / 220
General Purpose Rating (75%-80% pf): A@V 10 @ 240
Horse Power (AC): HP 1/2 @ 120 V 1/2 @ 120 V 1/2 @ 120 V 1/2 @ 120 V 1/2 @ 120 V
Horse Power (AC): HP 1 @ 250 V 1 @ 250 V 1 @ 250 V 3/4 @ 250 V 3/4 @ 250 V
Pilot Duty (60 Hz): B300 B300 B300 B300 B300
Utilization Category: IEC AC15 AC15 AC15 AC15 AC15
VA Rating Make: VA 3600 3600 3600 3600 3600
VA Rating Break: VA 360 360 360 360 360
Minimum Recommended Load: ma 100 @ 5 VDC 100 @ 5 VDC 100 @ 5 VDC 100 @ 5 VDC 100 @ 5 VDC
or 0.5 W or 0.5 W or 0.5 W or 0.5 W or 0.5 W
TIMING
Operate Time: ms 20 20 25 25 20
Release Time: ms 20 20 20 20 20
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 2500 2500 2500 2500 2500
Across Open Contacts: V rms 1500 1500 1000 1000 1000
Pole to Pole: V rms 2500 2500 2500
Insulation Resistance: megohms 100 @ 500 100 @ 500 100 @ 500 100 @ 500 100 @ 500
minimum @ VDC
VIBR ATION RESIS TANCE
Functional: gs 10-55 Hz, 6 gs,1mm 10-55 Hz, 6gs 1mm 10-55 Hz, 6gs 1mm 10-55 Hz, 6gs 1mm 10-55 Hz, 6gs1mm
double amplitude double amplitude double amplitude double amplitude double amplitude
SHOCK RESIS TANCE
Functional: gs 10 10 10 10 10
TEMPER ATURE
Operating, AC Lower: ºC -40 -40 -40 -40 -40
Operating, AC Upper: ºC +70 +70 +70 +70 +70
Operating, DC Lower: ºC -40 -40 -40 -40 -40
Operating, DC Upper: ºC +70 +70 +70 +70 +70
Storage, Lower: ºC -40 -40 -40 -40 -40
Storage, Upper: ºC +105 +105 +105 +105 +105
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 15 A: 100,000 100,000 200,000 150,000 150,000
20 A: 50,000
Mechanical @ no Load : operations 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000
MISCELLANEOUS
Operating Position: Any Any Any Any Any
Insulation Material: 94V-0 Molded plastic Molded plastic Molded plastic Molded plastic Molded plastic
Enclosure Material: 94V-0 Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate
Cover Protection Category: IP 40 40 40 40 40
Terminals: Inch (mm) 0.187, 0.1, 0.08 x 0.020 0.187, 0.08 x 0.020 0.187, 0.08 x 0.020 0.187, 0.08 x 0.020 0.187, 0.08 x 0.020
(4.47, 2.54, 2.03 x 0.508) (4.47, 2.03 x 0.508) (4.47, 2.03 x 0.508) (4.47, 2.03 x 0.508) (4.47, 2.03 x 0.508)
Weight: grams 29 36 36 60 80
9/04
(12) 1
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
(14) 5
QUICK CONNECT (11) 9
Plain Cover With Flag Orange Flag SOLDER / PLUG-IN TERMINALS (A1) (A2)
& Optional Push Button Indicator
13 14
PRINTED CIRCUIT
TERMINALS
ALTERNATE NEMA
OR IEC ( ) NUMBERS
VIEWED FROM
1.40 MAX. 1.6 MAX. PIN SIDE
(35.5) (40.6) PRINTED CIRCUIT
Standard
Cover MOUNTING HOLE LAYOUT
( TOP VIEW )
0.53 Clear 0.55
(13.4) Window (14)
1
0.18
Push button 5 (4.7)
Orange Flag 1.10 MAX. 0.23
Indicator (27.9) 9 (5.9)
Standard 1.06 0.25
Cover (26.9) 13 14
(6.6)
ORDERING CODE
(A1)13 14(A2)
Mating Sockets
70-782D-1, 70-459-1:
SCREW/DIN SOLDER
ORDERING CODE 70-402-1: PRINTED CIRCUIT
70-401-1: SOLDER TERMINAL
See section 7
782 XAX M4L -120A
STANDARD PART NUMBERS COIL MEASURED @ 25 ºC
CLASS: NOMINAL NOMINAL
FULL PLAIN COVER
INPUT RESISTANCE
FEATURED WITH FLAG
CONTACT CONFIGURATION: VOLTAGE (OHMS)
SPDT: XAX AC OPERATED SOLDER/PLUG -IN, 20 AMP
DUAL MARKED
NEW PART NUMBER SUPERCEDES
OPTIONAL PLAIN COVER:
CODE C 782XAXM4L-12A 782XAXC-12A W78ARCSX-108 12 VAC, 50/60Hz 46 W
782XAXM4L-24A 782XAXC-24A W78ARCSX-109 24 VAC, 50/60Hz 180 W
TERMINAL STYLE: 782XAXM4L-120A 782XAXC-120A W78ARCSX-111 110/120 VAC,50/60Hz 4,430 W
QUICK CONNECTSOLDER/ 782XAXM4L-220/230A 782XAXC-220/230A 220/230VAC,50/60Hz 15,000 W
PLUG-IN TERMINALS: NO CODE 782XAXM4L-240A 782XAXC-240A W78ARCSX-112 240 VAC, 50/60HZ 15,700 W
PRINTED CIRCUIT TERMINALS: CODE T DC OPERATED SOLDER/PLUG -IN, 20 AMP
782XAXM4L-12D 782XAXC-12D W78RCSX-97 12 VDC 160 W
FULL FEATURED VERSION: 782XAXM4L-24D 782XAXC-24D W78RCSX-98 24 VDC 650 W
PUSH BUTTON & 782XAXM4L-110D 782XAXC-110D W78RCSX-100 110/125 VDC 13,800 W
LOCK-DOWN DOOR: CODE M4 AC OPERATED SOLDER/PLUG -IN, 20 AMP WITH STATUS LED LAMP
BI - POLAR L.E.D. STATUS LAMP: CODE L 782XAXCL-24A W78ARNCSX-8 24 VAC, 50/60Hz 180 W
782XAXCL-120A W78ARNCSX-9 110/120 VAC,50/60Hz 4,430 W
OPTIONAL FULL FEATURED DELETION: 782XAXCL-240A W78ARNCSX-10 240 VAC, 50/60HZ 15,700 W
PUSH BUTTON WITHOUT DC OPERATED SOLDER/PLUG -IN, 20 AMP WITH STATUS LED LAMP
LOCK-DOWN DOOR: CODE M
782XAXCL-24D W78RNCSX-10 24 VDC 650 W
OPTIONAL PLAIN COVER FEATURES: AC OPERATED PRINTED CIRCUIT TERMINALS, 20 AMP
782XAXTM4L-12A 782XAXCT-12A W78ARPCX-81 12 VAC, 50/60Hz 46 W
PUSH BUTTON WITHOUT
LOCK-DOWN DOOR: CODE M 782XAXTM4L-24A 782XAXCT-24A W78ARPCX-82 24 VAC, 50/60Hz 180 W
POLARIZED L.E.D. STATUS LAMP: CODE L 782XAXTM4L-120A 782XAXCT-120A W78ARPCX-84 110/120 VAC,50/60Hz 4,430 W
(OBSERVE POLARITY ) DC OPERATED PRINTED CIRCUIT TERMINALS, 20 AMP
782XAXTM4L-12D 782XAXCT-12D W78RPCX-79 12 VDC 160 W
COIL VOLTAGE: 782XAXTM4L-24D 782XAXCT-24D W78RPCX-83 24 VDC 650 W
6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 782XAXTM4L-110D 782XAXCT-110D W78RPCX-85 110 /125 VDC 13,800 W
6, 12, 24 ,48, 110 ADD D FOR DC COILS
NOTE: CLASS 782C IS AN ENHANCED VERSION OF THE 78, 9/04
IT HAS SUPERIOR RATINGS, A FLAG INDICATOR, & DISPLAYS BOTH PART NUMBERS.
PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...15
782/78 - 2 POLE ICE CUBE POWER RELAYS
(12) 1 4 (42)
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
QUICK CONNECT
(14)
(14) 5 8 (44)
SOLDER / PLUG-IN TERMINALS
Class 782 Orange Flag
Plain Cover With Flag Indicator PRINTED CIRCUIT (11) 9 12 (41)
TERMINALS
(A1) (A2)
13 14
ALTERNATE NEMA
1.40 MAX. 1.54 MAX. PRINTED CIRCUIT OR IEC ( ) NUMBERS
(35.5) (39.1) MOUNTING HOLE LAYOUT VIEWED FROM
( TOP VIEW )
Standard PIN SIDE
Cover
Push Button & Clear 0.83 MAX. 0.56
Lock-Down Door Window (21.0) (14.2)
1 2
Orange Flag 3 4
Indicator
1.10 MAX. 0.70
1.06 (27.9) 5 6 0.52 (17.7)
(26.9) 0.28 (13.2)
Standard 7 8
Cover (7.11)
ORDERING CODE
CLASS:
Mating Sockets
CONTACT CONFIGURATION: 70-782D-1, 70-459-1: SCREW/DIN
DPDT: XBX 70-402-1: PRINTED CIRCUIT
70-401-1: SOLDER TERMINAL
OPTIONAL PLAIN COVER: See section 7
CODE C STANDARD PART NUMBERS COIL MEASURED @ 25ºC
TERMINAL STYLE: NOMINAL NOMINAL
FULL PLAIN COVER RESISTANCE
QUICK CONNECTSOLDER/ INPUT
FEATURED WITH FLAG (OHMS)
PLUG-IN TERMINALS: NO CODE VOLTAGE
PRINTED CIRCUIT TERMINALS: SOLDER/PLUG -IN, 15 AMP
DUAL MARKED
CODE T NEW PART NUMBER SUPERCEDES
782XBXC-6A W78ARCSX-7 6 VAC, 50/60Hz 9.6 W
FULL FEATURED VERSION:
782XBXM4L-24A 782XBXC-24A W78ARCSX-9 24 VAC, 50/60Hz 180 W
PUSH BUTTON &
LOCK-DOWN DOOR: CODE M4 782XBXM4L-120A 782XBXC-120A W78ARCSX-11 110/120 VAC, 50/60Hz 4,430 W
BI - POLAR L.E.D. STATUS LAMP: CODE L 782XBXM4L-220/230A 220/230 VAC, 50/60Hz 15,000 W
782XBXM4L-240A 782XBXC-240A W78ARCSX-12 240 VAC, 50/60Hz 15,700 W
OPTIONAL FULL FEATURED DELETION: 782XBXC-6D W78RCSX-6 6 VDC 40 W
PUSH BUTTON WITHOUT 782XBXM4L-12D 782XBXC-12D W78RCSX-7 12 VDC 160 W
LOCK-DOWN DOOR: CODE M 782XBXM4L-24D 782XBXC-24D W78RCSX-8 24 VDC 650 W
782XBXC-48D W78RCSX-9 48 VDC 2600 W
OPTIONAL PLAIN COVER FEATURES:
PUSH BUTTON WITHOUT 782XBXM4L-110D 782XBXC-110D W78RCSX-10 110/125 VDC 11,000 W
LOCK-DOWN DOOR: CODE M PRINTED CIRCUIT, 15 AMP
POLARIZED L.E.D. STATUS LAMP: CODE L 782XBXCT-24A W78ARPCX-3 24 VAC, 50/60Hz 180 W
(OBSERVE POLARITY ) 782XBXCT-120A W78ARPCX-6 110/120 VAC, 50/60Hz 4,430 W
782XBXCT-6D W78RPCX-1 6 VDC 40 W
COIL VOLTAGE:
782XBXCT-12D W78RPCX-2 12 VDC 160 W
6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS
6, 12, 24 ,48, 110 ADD D FOR DC COILS 782XBXCT-24D W78RPCX-3 24 VDC 650 W
NOTE: CLASS 782C IS AN ENHANCED VERSION OF THE 78, IT HAS SUPERIOR RATINGS,
9/04
A FLAG INDICATOR, & DISPLAYS BOTH PART NUMBERS.
1...16 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com
783 - 3 POLE ICE CUBE POWER RELAY
ALTERNATE NEMA
OR IEC ( ) NUMBERS
VIEWED FROM
1.40 MAX. 1.54 MAX. PIN SIDE
(35.56) (39.11) PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
Standard ( TOP VIEW )
Push Button Cover Clear 1.21
& Lock-Down Door 0.39 0.15
Window (30.8) (9.90) (3.93)
Orange Flag 1 2 4
0.18
Indicator 5 6 8 (4.69)
Standard 0.23
1.10 MAX. 9 10 12 (5.84)
Cover
1.06 (27.9)
(26.9) 13 14
0.26
(6.65)
ORDERING CODE
CLASS:
CONTACT CONFIGURATION:
3PDT: XCX
ALTERNATE NEMA
OR IEC ( ) NUMBERS
VIEWED FROM
PIN SIDE
ORDERING CODE
CLASS:
CONTACT CONFIGURATION:
4PDT: XDX
F E AT U R E S B E N E F I T S
MANUFACTURED
UNDER
ISO 9002
& QS 9000
UL RATINGS FOR 782 HERMETICALLY SEALED
9/04
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS 782XBX1/782XDX1 782XBX2/782XDX2 782XBX3/782XDX3 782H
COIL
Pull-in Voltage AC (50/60 Hz):< % of nominal 85 85 85 85
Pull-in Voltage DC:< % of nominal 80 80 80 80
Dropout Voltage AC (50/60 Hz):> % of nominal 10 10 10 10
Dropout Voltage DC:> % of nominal 10 10 10 10
Maximum Voltage: % of nominal 110 110 110 110
Resistance: %± 15 15 15 15
Coil Power AC (60 Hz): VA 1.2 1.2 1.2 1.2
Coil Power DC: W 0.9 0.9 0.9 0.9
Insulation System Per UL Standard 1446: Class B (130 ºC) Class B (130 ºC) Class B (130ºC) Class B (130ºC)
Maximum Coil Dissipation, AC (60 Hz): VA 2.55 2.55 2.55 2.5
Maximum Coil Dissipation, DC: W 2.3 2.3 2.3 2
Duty: Continuous Continuous Continuous Continuous
CONTA
CONTACTS
Contact Material: Silver alloy, Silver alloy, Silver alloy, Silver,gold plated,silver,gold
gold flashed gold flashed gold flashed flashed, silver alloy, gold,
flashed, gold,silver,nickel
Contact Rating AC Amperes (AC1): A 3 10 / 8.0 3 1.0 / 3.0 / 5.0
Contact Rating AC Voltage: V 120 / 240 110/120 - 220/277 120 /240 120 / 240
Contact Rating DC Amperes (DC1): A 3 / 0.25 8 / 0.25 3 / 0.25 1.0 / 3.0 / 5.0
Contact Rating DC Voltage: V 28 / 220 28 / 220 28 / 220 28
Horse Power (AC): HP 1/10 @ 120 V 1/3 @ 120 V 1/16 @ 120 V
Horse Power (AC): HP 1/10 @ 240 V 1 @ 277 V
Pilot Duty (60 Hz): B300 B300 B300
Utilization Category: IEC AC15 AC15 AC15 AC15
VA Rating Make: VA 1800 3600 1800 1800
VA Rating Break: VA 180 360 180 180
Minimum Recommended Load: ma 100 @ 5 VDC 100 @ 5 VDC 50 @ 5 VDC 50/100 @ 5 VDC
or 0.5 W or 0.5 W or 0.5 W or 50 mw / 0.5 W
TIMING
Operate Time: ms 20 20 20 13
Release Time: ms 20 20 20 6
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 1500 1500 1500 1240
Across Open Contacts: V rms 1000 1000 1000 500
Pole to Pole: V rms 1500 1500 1500 1240
Contacts to Frame: V rms 1240
Insulation Resistance: megohms 100 @ 500 100 @ 500 100 @ 500 100 @ 500
minimum @VDC
VIBR ATION RESIS TANCE
Functional: gs 10-55 Hz, 6 gs,1 mm 10-55 Hz, 6 gs,1 mm 10-55 Hz, 6 gs,1 mm 10-55 Hz, 6 gs,1 mm
double amplitude double amplitude double amplitude double amplitude
SHOCK RESIS TANCE
Functional: gs 10 10 10 10
TEMPER ATURE
Operating, AC Lower: ºC -40 -40 -40 -40
Operating, AC Upper: ºC +70 +70 +70 +70
Operating, DC Lower: ºC -40 -40 -40 -40
Operating, DC Upper: ºC +70 +70 +70 +70
Storage, Lower: ºC -40 -40 -40 -40
Storage, Upper: ºC +105 +105 +105 +105
LIFE EXPECTANC
EXPECTANCY Y
Electrical @ Rated Load (AC1): operations 200,000 200,000 200,000 100,000
Mechanical @ no Load : operations 10,000,000 10,000,000 10,000,000 10,000,000
MISCELLANEOUS
Operating Position: Any Any Any Any
Insulation Material: 94V-0 Molded plastic Molded plastic Molded plastic Molded plastic
Enclosure Material: 94V-0 Polycarbonate Polycarbonate Polycarbonate Steel
Cover Protection Category: IP 40 40 40 67
Terminals: Inch (mm) 0.10 x 0.020 0.10 x 0.020 0.10 x 0.020 0.10 x 0.020
(2.54 x 0.508) (2.54 x 0.508) (2.54 x 0.508) (2.54 x 0.508)
0.040 x 0.020 0.040 x 0.020 0.040 x 0.020
(1.016 x 0.508) (1.016 x 0.508) (1.016 x 0.508)
Weight: grams 36 36 36 45
9/04
(14)
(14) 5 8 (44)
(11) 9 12 (41)
(A1)13 14 (A2)
DPDT
OUTLINE DIMENSIONS
QUICK CONNECT
5(14) 6(24) 7(34) 8(44)
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
SOLDER / PLUG-IN TERMINALS
782 Plain Cover 9(11) 10 (21) 11 (31) 12(41)
4PDT
Orange Flag
Indicator
ALTERNATE NEMA
OR IEC ( ) NUMBERS
VIEWED FROM
PIN SIDE
0.05 DIA.
Green BI-Polar Frosted Panel 0.17 (1.27)
L. E. D. Status Lamp (4.32) 14 HOLES
Plastic I.D.
Tag/Write Label
SOLDER / PLUG-IN
TERMINALS
CERTIFIED CLASS 1
782H DIVISION 2 FOR
HAZARDOUS
0.31 (7.92)
LONG # 3 - 48 THREAD LOCATIONS
OPTIONAL CODE 2
MOUNTING STUD WITH # 6 - 32 THREAD
ANTI-ROTATION TAB
1.15 MAX.
(29.3)
1. 2 8 M A X . 0.91 MAX.
(32.5) (23.1)
9/04
ORDERING CODE
CONTACT CONFIGURATION:
DPDT: XBX, 4PDT: XDX
COIL VOLTAGE:
6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS
6, 12, 24 ,48, 110 ADD D FOR DC COILS
9/04
OPTIONAL ADAPTERS
ORDERED SEPARATELY
DIN ADAPTER
16-782C
FLANGE ADAPTER
16-782C1
Mating Sockets
70-461-1, SCREW/DIN
70-378-1: SOLDER
70-379-1: PRINTED CIRCUIT
See section 7
C US F E AT U R E S B E N E F I T S
UL Recognized
File No. E43641
CURRENT LIMITED
TO RATING OF MANUFACTURED
RELAY OR SOCKET
UNDER
WHICHEVER IS LESS
ISO 9002
& QS 9000
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS
COIL
Pull-in Voltage AC (50/60 Hz):< % of nominal 85 UNITS
Pull-in Voltage DC:< % of nominal 80 DIELECTRIC S TRENGTH
Dropout Voltage AC (50/60 Hz):> % of nominal 10 Coil to Contacts: V rms 2500
Dropout Voltage DC:> % of nominal 10 Across Open Contacts: V rms 1500
Maximum Voltage: % of nominal 110 Pole to Pole: V rms 2500
Resistance: %± 10 Contacts to Frame: V rms 2500
Coil Power AC (60 Hz): VA 2.0 - 3.0 Insulation Resistance: megohms 100 @ 500
Coil Power DC: W 1.4 minimum @VDC
Insulation System Per UL Standard 1446: Class B (130 ºC) VIBR ATION RESIS TANCE
Maximum Coil Dissipation, AC (60 Hz): VA 3.5 Functional: gs 10-55 Hz, 6 gs,1mm
Maximum Coil Dissipation, DC: W 3 double amplitude
Duty: Continuous SHOCK RESIS TANCE
Functional: gs 10
CONTA
CONTACTS
Contact Material: Silver alloy, TEMPER ATURE
gold flashed Operating, AC Lower: ºC -40
Contact Rating AC Amperes (AC1): A 16 Operating, AC Upper: ºC +50
Contact Rating AC Voltage: V 277 Operating, DC Lower: ºC -40
Contact Rating DC Amperes (DC1): A 16 / 0.5 Operating, DC Upper: ºC +65
Contact Rating DC Voltage: V 28 / 220 Storage, Lower: ºC -40
General Purpose Rating (75%-80% pf): A@V 12 @ 120 / 240 Storage, Upper: ºC +105
Horse Power (AC): HP 1/3 @ 120 V
Horse Power (AC): HP 1/2 @ 240 V LIFE EXPECTANC
EXPECTANCY Y
Pilot Duty (60 Hz): B300 Electrical @ Rated Load (AC1): operations 100,000
Utilization Category: IEC AC15 Mechanical @ no Load : operations 5,000,000
VA Rating Make: VA 3600
VA Rating Break: VA 360 MISCELLANEOUS
Minimum Recommended Load: ma 100 @ 5 VDC Operating Position: Any
or 0.5 W Insulation Material: 94V-0 Molded plastic
TIMING Enclosure Material: 94V-0 Polycarbonate
Operate Time: ms 20 Cover Protection Category: IP 40
Release Time: ms 20 Weight: grams 89
9/04
C US
F E AT U R E S B E N E F I T S
UL Recognized
File No. E43641
FLAG INDICATOR: SHOWS RELAY STATUS IN MANUAL OR POWERED CONDITION.
COMPLIES WITH REQUIREMENTS OF IDENTIFIES AC COILS WITH RED OR DC COILS WITH BLUE
* IEC STANDARDS 947-4-1 AND COLOR CODED PUSH BUTTONS. ALLOWS FOR MANUAL OPERATION OF RELAY
947-5-1 LOW VOLTAGE DIRECTIVE
PUSH BUTTON: WITHOUT THE NEED FOR COIL POWER. IDEAL FOR FIELD
* IEC = INTERNATIONAL
ELECTROTECHNICAL COMMISSION
SERVICE PERSONNEL TO TEST CONTROL CIRCUITS.
* CE TESTING AND EVALUATION
WHEN ACTIVATED, HOLDS PUSH BUTTON AND CONTACTS
PERFORMED BY THE UNDERWRITERS
LABORATORIES AS A THIRD PARTY
LOCK-DOWN DOOR:
PARTICIPANT IN THE OPERATE POSITION. EXCELLENT FOR ANALYZING
CIRCUIT PROBLEMS.
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS UNITS
COIL DIELECTRIC S TRENGTH
Pull-in Voltage AC (50/60 Hz):< % of nominal 85 Coil to Contacts: V rms 2500
Pull-in Voltage DC:< % of nominal 80 Across Open Contacts: V rms 1500
Dropout Voltage AC (50/60 Hz):> % of nominal 10 Pole to Pole: V rms 2500
Dropout Voltage DC:> % of nominal 10 Contacts to Frame: V rms
Maximum Voltage: % of nominal 110 Insulation Resistance: megohms 1000 @ 500
Resistance: %± 10 minimum @VDC
Coil Power AC (60 Hz): VA 2.0 - 3.0 VIBR ATION RESIS TANCE
Coil Power DC: W 1.4 Functional: gs 10-55 Hz, 6 gs,1mm
Insulation System Per UL Standard 1446: Class B (130 ºC) double amplitude
Maximum Coil Dissipation, AC (60 Hz): VA 3.5 SHOCK RESIS TANCE
Maximum Coil Dissipation, DC: W 3 Functional: gs 10
Duty: Continuous
TEMPER ATURE
CONTA
CONTACTS Operating, AC Lower: ºC -40
Contact Material: Silver alloy, Operating, AC Upper: ºC +50
gold flashed Operating, DC Lower: ºC -40
Contact Rating AC Amperes (AC1): A 16 Operating, DC Upper: ºC +65
Contact Rating AC Voltage: V 277 Storage, Lower: ºC -40
Contact Rating DC Amperes (DC1): A 16 / 0.5 Storage, Upper: ºC +105
Contact Rating DC Voltage: V 28 / 220
Horse Power (AC): HP 1/3 @ 120 V LIFE EXPECTANC
EXPECTANCY Y
Horse Power (AC): HP 1/2 @ 240 V Electrical @ Rated Load (AC1): operations 100,000
Pilot Duty (60 Hz): B300 Mechanical @ no Load : operations 5,000,000
Utilization Category: IEC AC15
VA Rating Make: VA 3600 MISCELLANEOUS
VA Rating Break: VA 360 Operating Position: Any
Minimum Recommended Load: ma 100 @ 5 VDC Insulation Material: 94V-0 Molded plastic
or 0.5 W Enclosure Material: 94V-0 Polycarbonate
TIMING Cover Protection Category: IP 40
Operate Time: ms 20 Terminals: Inch (mm) 0.187, 0.062 x 0.020
Release Time: ms 20 (4.74, 1.57 x 0.508)
Weight: grams 88
9/04
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
(12) 1 (22) 3
(11) 7 (21) 9
PRINTED CIRCUIT
TERMINALS (A1)A (A2) B
DPDT
12) 1 (32) 2 (22) 3
1.97
(50) Orange Flag (14)4 (34)5 (24) 6
Push Button &
Lock-Down Door Frosted Cover Clear
1.32 Orange Flag 1.37
Window (34.9) (11) 7 (31)8 (21)9
(33.5) Indicator
1 2 3 (A1)A (A2) B
4 5 6
1.35 1.39
(34.4) (35.4) 7 8 9 3PDT
A B ALTERNATE NEMA
OR IEC ( ) NUMBERS
Green BI-Polar VIEWED FROM
L. E. D. Status Lamp PRINTED CIRCUIT PIN SIDE
Plastic I.D. MOUNTING HOLE LAYOUT
Tag / Write Label ( TOP VIEW )
0.875
(22.2)
0.829
0.611 (21.0)
(15.5)
0.287
(7.28)
ORDERING CODE 0 .078 (1.98)Dia. 0.437 Mating Sockets
Holes for printed (11.1) 70-463-1: SCREW/DIN
circuit terminals.
70-124-1: SOLDER
788 XBX M4L -120A 70-178-1, 70-178-2: PRINTED CIRCUIT
70-788EL/SL11-1, 70-124-2: QUICK CONNECT
CLASS: See section 7
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS
COIL
Pull-in Voltage AC (50/60 Hz):< % of nominal 85
Pull-in Voltage DC:< % of nominal 80
Dropout Voltage AC (50/60 Hz):> % of nominal 10
Dropout Voltage DC:> % of nominal 10
Maximum Voltage: % of nominal 110
Resistance: %± 10
Coil Power AC (60 Hz): VA 2.75
Coil Power DC: W 2 UNITS
Insulation System Per UL Standard 1446: Class B (130 ºC) TEMPER ATURE
Duty: Continuous Operating, AC Lower: ºC -30
Operating, AC Upper: ºC +60
CONTA
CONTACTS Operating, DC Lower: ºC -30
Contact Material: Silver alloy Operating, DC Upper: ºC +50
gold flashed Storage, Lower: ºC -30
Contact Rating AC Amperes (AC1): A 15 Storage, Upper: ºC +100
Contact Rating AC Voltage: V 240
Contact Rating DC Amperes (DC1): A 10 LIFE EXPECTANC
EXPECTANCY Y
Contact Rating DC Voltage: V 28 Electrical @ Rated Load (AC1): operations 100,000
Horse Power (AC): HP 1/3 @ 120 V Mechanical @ no Load : operations 10,000,000
Horse Power (AC): V 1/2 @ 240 V
Minimum Recommended Load: ma 100 @ 5 VDC MISCELLANEOUS
or 0.5 W Operating Position: Any
DIELECTRIC S TRENGTH Insulation Material: 94V-0 Molded plastic
Coil to Contacts: V rms 2000 Enclosure Material: 94V-0 Polycarbonate
Across Open Contacts: V rms 500 Cover Protection Category: IP 40
Pole to Pole: V rms 2000 Terminals: Inch (mm) 0.187, 0.062 x 0.020
Contacts to Frame: V rms Not applicable (4.74, 1.57 x 0.508 )
Insulation Resistance: megohms 1000 @ 500 Weight: grams 88
minimum @VDC
9/04
RECOMMENDED
PRINTED CIRCUIT LAYOUT
PLUG-IN FLANGE MOUNT (TOP VIEW)
0.875
(22.2)
0.437
(11.1)
0.611 0.829
(15.5) (21.0)
0 .078 0.287
(1.98) dia. (7.28)
holes for printed
circuit terminals.
CONTACT CONFIGURATION:
SPDT: XAX
DPDT: XBX
DPST-NO: BXX
3PDT: XCX
SPST -NO-DM: HXX
SPDT -DB and DM: XHX
OPTIONAL
OPTIONAL: TOP FLANGE COVER
MAGNETIC BLOWOUT: CODE 69
CONSTRUCTION STYLE:
* ENCLOSED, PLAIN COVER: CODE C
ENCLOSED, FLANGE COVER: CODE C1
ENCLOSED TOP FLANGE MOUNT: CODE C3
ENCLOSED DIN MOUNT: CODE C4
TERMINAL STYLE:
QUICK CONNECT SOLDER TERMINALS: NO CODE OPTIONAL
PRINTED CIRCUIT TERMINALS: CODE T
DIN COVER
OPTIONS:
BI - POLAR L.E.D. STATUS LAMP: CODE L
PUSH BUTTON: CODE M
COIL VOLTAGE:
6, 12, 24, 120, 240 ADD A FOR AC COILS
6, 12, 24, 48, 110 ADD D FOR DC COILS
9/04
SPDT
(12) 1 3 (22)
(14) 4 6 (24)
2.50 MAX. 1.90 MAX.
(63.5) (48.4)
2.90 MAX. 1.53 MAX. (11) 7 9 (21)
(73.8) (38.8)
(A1)A B(A2)
1 2 3
4 5 6
DPDT
1.40
(35.5) 7 8 9 12) 1 (32) 2 3(22)
(14) 4 (34)5 6(24)
A B
3PDT
ALTERNATE NEMA
OR IEC ( ) NUMBERS
VIEWED FROM
PIN SIDE
Mating Sockets
70-463-1: SCREW/DIN
70-124-1: SOLDER
70-178-1, 70-178-2: PRINTED CIRCUIT
SEE CLASS 788 FOR 70-788EL/SL-1, 170-124-2: QUICK CONNECT
PART NUMBERS WITH PLUG-IN See section 7
L.E.D. STATUS LAMP COIL MEASURED @ 25 ºC
AND PUSH BUTTON STANDARD CONTACT NOMINAL NOMINAL
F LANGE MOUNT PART CONFIGU- INPUT RESISTANCE
COIL MEASURED @ 25 ºC NUMBERS RATION VOLTAGE (OHMS)
STANDARD CONTACT NOMINAL NOMINAL AC OPERATED SOLDER/PLUG-IN, 15 AMP
PART CONFIGU- INPUT RESISTANCE
(OHMS) A283XAXC-120A SPDT 110/120 VAC, 50/60Hz 2250 W
NUMBERS RATION VOLTAGE
A283XAXC-240A SPDT 220/240 VAC, 50/60Hz 9100 W
AC OPERATED, 15 AMP
A283XBXC-24A DPDT 24 VAC, 50/60Hz 75 W
A283XAXC1-120A SPDT 110/120 VAC, 50/60Hz 2250 W A283XBXC-120A DPDT 110/120 VAC, 50/60Hz 2250 W
A283XAXC1-240A SPDT 220/240 VAC, 50/60Hz 9100 W A283XBXC-240A DPDT 220/240 VAC, 50/60Hz 9100 W
A283XBXC1-120A DPDT 110/120 VAC, 50/60Hz 2250 W A283XCXC-24A 3PDT 24 VAC, 50/60Hz 72 W
A283XBXC1-240A DPDT 220/240 VAC, 50/60Hz 9100 W A283XCXC-120A 3PDT 110/120 VAC, 50/60Hz 1700 W
A283XCXC1-120A 3PDT 110/120 VAC, 50/60Hz 1700 W A283XCXC-240A 3PDT 220/240 VAC, 50/60Hz 7200 W
A283XCXC1-240A 3PDT 220/240 VAC, 50/60Hz 7200 W DC OPERATED SOLDER/PLUG-IN, 15 AMP
DC OPERATED, 15 AMP A283XAXC-12D SPDT 12 VDC 120 W
A283XAXC1-12D SPDT 12 VDC 120 W A283XAXC-24D SPDT 24 VDC 472 W
A283XAXC1-24D SPDT 24 VDC 472 W A283XBXC-12D DPDT 12 VDC 120 W
A283XBXC1-12D DPDT 12 VDC 120 W A283XBXC-24D DPDT 24 VDC 472 W
A283XBXC1-24D DPDT 24 VDC 472 W A283XBXC-110D DPDT 110/125 VDC 10,000 W
A283XCXC1-24D 3PDT 24 VDC 472 W A283XCXC-12D 3PDT 12 VDC 120 W
9/04 RETROFITS POTTER & BRUMFIELD KUP. A283XCXC-24D 3PDT 24 VDC 472 W
1...30 SEE END OF SECTION 1 FOR CROSS REFERENCE
PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com
A283 PLUG-IN RELAY FOR DC SWITCHING
(A1)A B (A2)
SPST-NO-DM
A B
BLOWOUT MAGNET
STANDARD FEATURE
Mating Sockets
70-463-1: SCREW/DIN
70-124-1: SOLDER
70-178-1, 70-178-2: PRINTED CIRCUIT
70-788EL/SL-1, 70-124-2: QUICK CONNECT
See section 7
BENEFITS OF 3mm
PLUG-IN FLANGE MOUNT OPTIONAL DIN MOUNT CONTACT GAP DESIGN:
COVER 1. HIGH DIELECTRIC STRENGTH
ACROSS CONTACTS.
(12) 1 3 (22)
OUTLINE DIMENSIONS QUICK CONNECT
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). SOLDER / PLUG-IN TERMINALS (14)
(14) 4 6 (24)
PLUG-IN
(11) 7 9 (21)
1.53 MAX.
(38.8)
(A1)A B (A2)
FLAG INDICATOR
DPDT
& PUSH BUTTON
STANDARD.
(12) 1 2 (32) 3 (22)
1.90 MAX.
Orange Flag
(48.4) (14) 4 5 (34) 6 24)
Indicator Push Button 1.53 MAX.
(38.8)
(11) (31) 8 (21)
1 2 3
7 9
4 5 6
1.40 1.40 (A1)A B (A2)
(35.5) 7 8 9 (35.5)
A B 3PDT
Mating Sockets
70-463-1: SCREW/DIN
70-124-1: SOLDER
70-178-1, 70-178-2: PRINTED CIRCUIT
70-788EL/SL-1, 70-124-2: QUICK CONNECT
See section 7
COIL MEASURED @ 25 ºC
ORDERING CODE
STANDARD CONTACT NOMINAL NOMINAL
PART CONFIGU- INPUT RESISTANCE
388J XCX C1 M- 240A NUMBERS RATION VOLTAGE (OHMS)
AC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 20 AMP
CLASS: 388JXBXC1M-240A DPDT 220/240 VAC,50/60Hz 9100 W
FLAG INDICATOR 388JXBXC1M-120A DPDT 110/120 VAC,50/60Hz 2250 W
STANDARD FEATURE
DC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 20 AMP
CONTACT CONFIGURATION: 388JXBXC1M-12D DPDT 12 VDC 120 W
DPDT: XBX, 3PDT: XCX 388JXBXC1M-24D DPDT 24 VDC 470 W
AC OPERATED PLUG-IN WITH PUSH BUTTON, 20 AMP
OPTIONAL:
MAGNETIC BLOWOUT: CODE 69 (XBX ONLY) 388JXBXCM-240A DPDT 220/240 VAC,50/60Hz 9100 W
388JXBXCM-120A DPDT 110/120 VAC,50/60Hz 2250 W
CONSTRUCTION STYLE: DC OPERATED PLUG-IN WITH PUSH BUTTON, 20 AMP
* ENCLOSED, PLAIN COVER: CODE C
ENCLOSED, FLANGE COVER: CODE C1 388JXBXCM-12D DPDT 12 VDC 120 W
ENCLOSED TOP FLANGE MOUNT: CODE C3 388JXBXCM-24D DPDT 24 VDC 470 W
ENCLOSED DIN MOUNT: CODE C4 AC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 16 AMP
388JXCXC1M-240A 3PDT 220/240 VAC,50/60Hz 7200 W
TERMINAL STYLE:
QUICK CONNECT SOLDER TERMINALS: NO CODE 388JXCXC1M-120A 3PDT 110/120 VAC,50/60Hz 1700 W
PRINTED CIRCUIT TERMINALS: CODE T DC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 16 AMP
388JXCXC1M-12D 3PDT 12 VDC 120 W
OPTIONS:
BI - POLAR L.E.D. STATUS LAMP: CODE L 388JXCXC1M-24D 3PDT 24 VDC 470 W
PUSH BUTTON: CODE M AC OPERATED PLUG-IN WITH PUSH BUTTON, 16 AMP
388JXCXCM-240A 3PDT 220/240 VAC,50/60Hz 7200 W
COIL VOLTAGE: 388JXCXCM-120A 3PDT 1700 W
110/120 VAC,50/60Hz
6, 12, 24, 120, 240 ADD A FOR AC COILS
6, 12, 24, 48, 110 ADD D FOR DC COILS DC OPERATED PLUG-IN WITH PUSH BUTTON, 16 AMP
388JXCXCM-12D 3PDT 12 VDC 120 W
* Note: Code C recommended to be used with printed circuit. terminals or 388JXCXCM-24D 3PDT 24 VDC 470 W
Plug-in applications only.
RETROFITS SCHRACK RM. SEE END OF SECTION 1 FOR CROSS REFERENCE 9/04
OUTLINE DIMENSIONS
15 AMPS
(14) 4 6 (24)
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
(A1) A B (A2)
1.53 MAX.
(38.8)
1.53 MAX.
DPST-NO
(38.8)
4 5 6
1.40
(14) 4 (34)5 (24) 6
7 8 9 (35.5)
1.90 MAX.
(48.4)
A B
(11) 7 8(31) (21) 9
Push Button
A B
(A1) (A2)
2.90 MAX.
(73.8) 3PST-NO
1.40
(35.5) 2.50 MAX.
(63.5)
ALTERNATE NEMA
OR IEC ( ) NUMBERS
VIEWED FROM
PIN SIDE
ORDERING CODE
CONTACT CONFIGURATION:
DPST-NO: BXX Mating Sockets
3PST-NO: CXX 70-463-1: SCREW/DIN
70-124-1: SOLDER
OPTIONAL: 70-178-1, 70-178-2: PRINTED CIRCUIT
MAGNETIC BLOWOUT: CODE 69 (BXX ONLY) 70-788EL/SL-1, 70-124-2: QUICK CONNECT
See section 7
CONSTRUCTION STYLE:
* ENCLOSED, PLAIN COVER: CODE C COIL MEASURED @ 25 ºC
ENCLOSED, FLANGE COVER: CODE C1 STANDARD CONTACT NOMINAL NOMINAL
ENCLOSED TOP FLANGE MOUNT: CODE C3 PART CONFIGU- INPUT RESISTANCE
ENCLOSED DIN MOUNT: CODE C4 NUMBERS RATION VOLTAGE (OHMS)
AC OPERATED PLUG-IN WITH PUSH BUTTON 3mm GAP, 15 AMP
TERMINAL STYLE:
QUICK CONNECT SOLDER/PLUG-IN TERMINALS: 388VCXXCM-220/240A 3PST-NO 220/240 VAC,50/60Hz 9100 W
NO CODE 388VCXXCM-120A 3PST-NO 110/120 VAC,50/60Hz 1100 W
PRINTED CIRCUIT TERMINALS: CODE T 3PST-NO 75 W
388VCXXCM-24A 24 VAC,50/60Hz
OPTIONS: 388VBXXCM-220/240A DPST-NO 220/240 VAC,50/60Hz 9100 W
BI - POLAR L.E.D. STATUS LAMP: CODE L 388VBXXCM-120A DPST-NO 110/120 VAC,50/60Hz 1100 W
PUSH BUTTON: CODE M 388VBXXCM-24A DPST-NO 24 VAC,50/60 Hz 75 W
DC OPERATED PLUG-IN WITH PUSH BUTTON 3mm GAP, 15 AMP
COIL VOLTAGE:
6, 12, 24, 120, 220/240 ADD A FOR AC COILS 388VCXXCM-24D 3PST-NO 24 VDC 240 W
6, 12, 24, 48, 110 ADD D FOR DC COILS 388VCXXCM-12D 3PST-NO 12 VDC 120 W
388VBXXCM-24D DPST-NO 24 VDC 240 W
* Note: Code C recommended to be used with printed circuit. terminals or 388VBXXCM-12D DPST-NO 12 VDC 120 W
Plug-in applications only.
9/04
RETROFITS POTTER & BRUMFIELD KUGP.
1...34 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com
SEE END OF SECTION 1 FOR CROSS REFERENCE
389 & 389F FLANGE MOUNT POWER RELAYS
F E AT U R E S B E N E F I T S
MANUFACTURED
DIELECTRIC STRENGTH CHART (V rms) UNDER
COMPLIES WITH REQUIREMENTS OF ISO 9002
* IEC STANDARDS 947-4-1 AND
CONTACT ACROSS OPEN COIL TO POLE TO & QS 9000
947-5-1 LOW VOLTAGE DIRECTIVE
CONFIGURATION CONTACTS CONTACTS POLE
* IEC = INTERNATIONAL
ELECTROTECHNICAL COMMISSION
SPST 1000 2200 -
* CE TESTING AND EVALUATION
PERFORMED BY THE UNDERWRITERS
LABORATORIES AS A THIRD PARTY DPDT 1000 2200 2200
PARTICIPANT
3PDT 1000 1600 1600
SPDT
(DB and DM) 1500 2200 -
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS
COIL
Pull-in Voltage AC (50/60 Hz):< % of nominal 85
Pull-in Voltage DC:< % of nominal 80
Dropout Voltage AC (50/60 Hz):> % of nominal 10
Dropout Voltage DC:> % of nominal 10
Maximum Voltage: % of nominal 110
Resistance: %± 10 UNITS
Coil Power AC (60 Hz): VA 3.5 TEMPER ATURE
Coil Power DC: W 1.44 Operating, AC Lower: ºC -30
Insulation System Per UL Standard 1446: Class B (130 ºC) Operating, AC Upper: ºC +65
Duty: Continuous Operating, DC Lower: ºC -30
Operating, DC Upper: ºC +50
CONTA
CONTACTS Storage, Lower: ºC -30
Contact Material: Silver alloy gold flashed Storage, Upper: ºC +100
Contact Rating AC Amperes (AC1): A 20, 25, 30
see load tables LIFE EXPECTANC
EXPECTANCY Y
Pilot Duty: A600, B600 Electrical @ Rated Load (AC1): operations 100,000
VA Rating Make: VA 600 Mechanical @ no Load : operations 5,000,000
VA Rating Break: VA 60
Minimum Recommended Load: ma 100 @ 5 VDC MISCELLANEOUS
or 0.5 W Operating Position: Any
DIELECTRIC S TRENGTH Insulation Material: 94V-0 Molded plastic
Coil to Contacts: V rms 1600 Enclosure Material: 94V-0 Polycarbonate
Across Open Contacts: V rms 1000 Cover Protection Category: IP 40
Pole to Pole: V rms 1600 Terminals: Inch (mm) 0.250, 0.09 x 0.032
Contacts to Frame: V rms Not applicable (6.35, 2.29 x 0.81 )
Insulation Resistance: megohms 1000 @ 500 Weight: grams 88
minimum @VDC
9/04
OUTLINE DIMENSIONS
20, 25 & 30 AMPS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
QUICK CONNECT
SOLDER / PLUG-IN TERMINALS
F E AT U R E S B E N E F I T S
2 MILLIMETER CONTACT GAPS
AND 8 MILLIMETER CREEPAGE MEETS INTERNATIONAL REQUIREMENTS.
C US
UL Recognized
AND CLEARANCE
File No. E13224
WIDE SPACING BETWEEN CLEARANCE FOR FULLY BOOTED
STATIONARY CONTACT TERMINALS QUICK CONNECT TERMINALS
* IEC = INTERNATIONAL
ELECTROTECHNICAL COMMISSION WIDE SELECTION OF ALLOWS INSTALLATIONS TO BE CUSTOMIZED
MOUNTING OPTIONS
* CE TESTING AND EVALUATION
PERFORMED BY THE UNDERWRITERS
LABORATORIES AS A THIRD PARTY
PARTICIPANT
MANUFACTURED
UNDER
ISO 9002
STANDARD SIDE OPTIONAL TOP FLANGE OPTIONAL & QS 9000
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS UNITS
COIL DIELECTRIC S TRENGTH
Pull-in Voltage AC (50/60 Hz):< % of nominal 85 Coil to Contacts: V rms 4000
Pull-in Voltage DC:< % of nominal 80 Across Open Contacts: V rms 1000
Dropout Voltage AC (50/60 Hz):> % of nominal 10 Pole to Pole: V rms 1000
Dropout Voltage DC:> % of nominal 10 Contacts to Frame: V rms Not applicable
Maximum Voltage: % of nominal 110 Insulation Resistance: megohms 1000 @ 500
Resistance: %± 10 minimum @VDC
Coil Power AC (60 Hz): VA 3 TEMPER ATURE
Coil Power DC: W 2 Operating, AC Lower: ºC -30
Insulation System Per UL Standard 1446: Class B (130 ºC) Operating, AC Upper: ºC +60
or Class F (155 ºC) Operating, DC Lower: ºC -30
Duty: Continuous Operating, DC Upper: ºC +50
Storage, Lower: ºC -40
CONTA
CONTACTS Storage, Upper: ºC +105
Contact Material: Silver alloy
gold flashed LIFE EXPECTANC
EXPECTANCY Y
Contact Rating AC Amperes (AC1): A 30 / 20 / 15 Electrical @ Rated Load (AC1): operations 100,000
Contact Rating AC Voltage: V 277 / 600 Mechanical @ no Load : operations 10,000,000
Contact Rating DC Amperes (DC1): A 30
Contact Rating DC Voltage: V 28 MISCELLANEOUS
Horse Power (AC): HP 1 @ 120 Operating Position: Any
Horse Power (AC): HP 2 @ 208 - 600 Insulation Material: 94V-0 Molded plastic
Minimum Recommended Load: ma 100 @ 5 VDC Enclosure Material: 94V-0 Polycarbonate
or 0.5 W Cover Protection Category: IP 40
TIMING Terminals: Inch (mm) 0.250, 0.09 x 0.032
Operate Time: ms 20 (6.35, 2.29 x 0.81 )
Release Time: ms 15 Weight: grams 85
9/04
2.50 MAX.
(63.5)
2.90 MAX. PRINTED CIRCUIT
(73.8) MOUNTING HOLE LAYOUT
( TOP VIEW )
ENCLOSED FLANGE MOUNT 1.53 MAX. 0.87
Optional Push Button (38.8) (22.2)
1 2
0.26
3 4 (6.73)
1.40 MAX. 0.25
5 6 (6.40)
(35.5)
0.29
A B (7.94)
0.100 DIA.
(2.54)
ORDERING CODE
TEMPERATURE RATING:
130ºC COIL (CLASS B): NO CODE
155ºC COIL (CLASS F): CODE F
CLASS:
CONTACT CONFIGURATION:
DPDT: XBX
SPDT-DB-DM: XHX
OPTIONAL:
MAGNETIC BLOWOUT :CODE 69 COIL MEASURED @ 25 ºC
CONSTRUCTION STYLE: STANDARD CONTACT NOMINAL NOMINAL
* ENCLOSED, PLAIN COVER: CODE C PART CONFIGU- INPUT RESISTANCE
NUMBERS RATION VOLTAGE (OHMS)
ENCLOSED, FLANGE COVER: CODE C1
ENCLOSED TOP FLANGE MOUNT: CODE C3 AC OPERATED, 30 AMP
ENCLOSED DIN MOUNT: CODE C4 5400 W
300XBXC1-240A DPDT 220/240 VAC, 50/60Hz
300XBXC1-120A DPDT 110/120 VAC, 50/60Hz 1270 W
TERMINAL STYLE:
QUICK CONNECT SOLDER TERMINALS: NO CODE 300XBXC1-24A DPDT 24 VAC, 50/60Hz 54 W
PRINTED CIRCUIT TERMINALS: CODE T 300XBXC1-12A DPDT 12 VAC, 50/60Hz 13.5 W
DC OPERATED, 30 AMP
OPTIONS: 300XBXC1-110D DPDT 110/125 VDC 6300 W
BI - POLAR L.E.D. STATUS LAMP: CODE L 300XBXC1-24D DPDT 24 VDC 300 W
PUSH BUTTON: CODE M 75 W
300XBXC1-12D DPDT 12 VDC
DC OPERATED, 30 AMP WITH MAGNETIC BLOWOUT
COIL VOLTAGE:
6, 12, 24, 120, 240 ADD A FOR AC COILS 300XBX69C1-110D DPDT 110/125 VDC 6300 W
6, 12, 24, 48, 110 ADD D FOR DC COILS 300XBX69C1-24D DPDT 24 VDC 300 W
300XBX69C1-12D DPDT 12 VDC 75 W
* Note: Code C recommended to be used with printed circuit terminals only.
9/04
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). WITH OPTIONAL DIN ADAPTER
1.08 MAX.
(27.4) 0.45
1.08 MAX.
1.10 MAX.
(11.4) FIG. A FIG. D
(27.4)
(27.9)
A1
1.980 MAX.
A1 (50.29)
A1
1.27 MAX. 2.56
1.713 ± 0.010 (65.0)
(43.51 ± 0.25) (32.2)
B1 B1 FIG. B FIG. E
OPTIONAL DIN
ADAPTER
16-9A DIN-1
ORDERED AND SHIPPED
SEPARATELY
STANDARD
FLANGE COVER
COIL MEASURED @ 25 ºC
STANDARD CONTACT NOMINAL NOMINAL
PART CONFIGU- FIG. RESISTANCE
INPUT
NUMBERS RATION VOLTAGE (OHMS)
FLANGE MOUNT, 30 AMP
W9AS1D52-5 SPST-NO A 5 VDC 25 W
W9AS1D52-12 SPST-NO A 12 VDC 144 W
MEETS UL 873 AND UL 508
W9AS1D52-24 SPST-NO A 24 VDC 576 W
SPACING - (8MM) THRU AIR, W9AS1D52-110 A 110/125 VDC 12100 W
SPST-NO
(9.5 MM) OVER SURFACE FLANGE MOUNT, 20 AMP
W9AS5D52-5 SPDT D 5 VDC 25 W
W9AS5D52-12 SPDT D 12 VDC 144 W
W9AS5D52-24 SPDT D 24 VDC 576 W
W9AS5D52-110 SPDT D 110/125 VDC 12100 W
FLANGE MOUNT, 30 AMP
W9AS1A52-24 SPST-NO F 24 VAC, 50/60 Hz 500 W
W9AS1A52-120 SPST-NO E 120 VAC, 50/60 Hz 3,000 W
W9AS1A52-240 SPST-NO E 240 VAC, 50/60 Hz 12,100 W
FLANGE MOUNT, 20 AMP
W9AS5A52-24 SPDT C 24 VAC, 50/60 Hz 500 W
W9AS5A52-120 SPDT B 120 VAC, 50/60 Hz 3,000 W
W9AS5A52-240 SPDT B 240 VAC, 50/60 Hz 12,100 W
9/04
PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com
1...41
92 FLANGE / DIN MOUNT POWER RELAY
30 AMPS
6 2 6 2
W 8 4 8 4
NE
6 2
1 0 1 0
OUTLINE DIMENSIONS FIG. A FIG. D
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
1.36 MAX.
(34.5)
6 2 6 2
1.00 ±0.010 1.17 MAX 8 4 8 4
(25.40) (29.7)
6 2
1 0 1 0
2.7 MAX.
(68.5) FIG. B FIG. E
2.35 ±0.005
(59.7 ±0.13) 6 2 6 2
8 4 8 4
2.06 MAX. 6 2
(52.3)
1 0 1 0
FIG. C FIG. F
1.63 MAX
0.090 RED (2.29) (41.4)
FOR #8 SCREWS
COIL MEASURED @ 25 ºC
DIN MOUNT SUPERCEDES CONTACT NOMINAL NOMINAL
PART PART FIG. CONFIGU- INPUT RESISTANCE
NUMBERS NUMBERS RATION VOLTAGE (OHMS)
AC OPERATED COIL FLANGE MOUNT, 30 AMP
DUAL MARKED
W92S7A22D-24 W92S7A22-24 C DPST-NO 24 VAC, 50/60 Hz 250 W
W92S7A22D-120 W92S7A22-120 B DPST-NO 120 VAC, 50/60 Hz 1,600 W
W92S7A22D-240 W92S7A22-240 B DPST-NO 240 VAC (50/60 Hz) 6,500 W
W92S11A22D-24 W92S11A22-24 F DPDT 24 VAC, 50/60 Hz 250 W
W92S11A22D-120 W92S11A22-120 E DPDT 120 VAC, 50/60 Hz 1,600 W
W92S11A22D-240 W92S11A22-240 E DPDT 240 VAC, 50/60 Hz 6,500 W
DC OPERATED COIL FLANGE MOUNT, 30 AMP
W92S7D22D-12 W92S7D22-12 A DPST-NO 12 VDC 86 W
W92S7D22D-24 W92S7D22-24 A DPST-NO 24 VDC 350 W
W92S7D22D-110 W92S7D22-110 A DPST-NO 110/125 VDC 7,255 W
W92S11D22D-12 W92S11D22-12 D DPDT 12 VDC 86 W
W92S11D22D-24 W92S11D22-24 D DPDT 24 VDC 350 W
W92S11D22D-110 W92S11D22-110 D DPDT 110/125 VDC 7,255 W
9/04
PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com
1...42
21/136 FLASH TRANSFER POWER RELAY
5 6 5 6
30 AMPS @ 120 / 240 VAC, 15 AMPS @ 120 VAC,
CURRENT RATING: 20 AMPS @ 28 VDC 15 AMPS @ 28 VDC
3 4 3 4
HORSEPOWER 1-1/2 HP @ 120 VAC, 1/4 HP @ 120 VAC,
RATING: 1 2 1 2
2 HP @ 240 VAC NOT UL RATED
TUNGSTEN 1 KW @ 120 / 240 VAC
2.4 KW @ 120 / 240 VAC
LOAD RATING:
CONTA
CONTACTS
Contact Material: Silver alloy 2.84 MAX. 1.85 MAX. POLARIZING
A (72.2) (46.9) PIN
Contact Rating AC Amperes (AC1): 30
Contact Rating AC Voltage: V 240
Contact Rating DC Amperes (DC1): A 20
Contact Rating DC Voltage: V 28
Horse Power (AC): Hp 1 1/2 @ 120 V 2.47 MAX.
Horse Power (AC): Hp (62.7)
2 @ 240 V
Minimum Recommended Load: ma 100 @ 5 VDC
or 0.5 W
TIMING
Operate Time: ms 20
Release Time: ms 20 1.00
3.90 MAX.
(99.2) (25.4)
DIELECTRIC S TRENGTH
Coil to Contacts: V rms 1500
Across Open Contacts: V rms 500
Pole to Pole: V rms 1500
Contacts to Frame: V rms Not Applicable
Insulation Resistance: megohms 1000 @ 500
minimum @VDC
TEMPER ATURE
Operating, AC Lower: ºC Not Applicable
Operating, AC Upper: ºC Not Applicable
Operating, DC Lower: ºC -40
Operating, DC Upper: ºC +80
Storage, Lower: ºC -40
Storage, Upper: ºC +130
Mating Sockets
LIFE EXPECTANC
EXPECTANCY Y 70-TRF8-1, 70-TRB8-1 : SOLDER
Electrical @ Rated Load (AC1): operations 200,000 See section 7
Mechanical @ no Load : operations 5,000,000 COIL MEASURED @ 25 ºC
MISCELLANEOUS STANDARD CONTACT NOMINAL
CONFIGU- NOMINAL
Operating Position: Any PART INPUT
RATION POWER
Insulation Material: 94V-0 Molded plastic NUMBER VOLTAGE
Enclosure Material: 94V-0 polycarbonate AC RECTIFIED - PLUG-IN, 30 AMP
Cover Protection Category: IP 40
W21ACPX-2 DPDT 110/120 VAC, 50/60Hz 4.0 VA
Terminals: Inch (mm) 0.250 x 0.032
(6.35 x 0.81 ) 136-627200 DPDT 110/120 VAC, 50/60Hz 10 VA
Weight: grams 205 9/04
Functional: gs 10
UNITS
COIL SHOCK RESIS TANCE
Pull-in Voltage AC (50/60 Hz):< % of nominal 80 Functional: gs 20
Pull-in Voltage DC:< % of nominal 75
Dropout Voltage AC (50/60 Hz):> % of nominal 10 TEMPER ATURE
Dropout Voltage DC:> % of nominal 10 Operating, AC Lower: ºC -40
Maximum Voltage: % of nominal 120 Operating, AC Upper: ºC +60
Resistance: %± 10 Operating, DC Lower: ºC -40
Coil Power AC (60 Hz): VA 2.75 Operating, DC Upper: ºC +60
Coil Power DC: W 0.45 Storage, Lower: ºC -40
Insulation System Per UL Standard 1446: Class B (130 ºC) Storage, Upper: ºC +130
Duty: Continuous
LIFE EXPECTANC
EXPECTANCY Y
CONTA
CONTACTS Electrical @ Rated Load (AC1): 100,000
operations
Contact Material: Silver alloy Mechanical @ no Load : operations 10,000,000
Contact Rating AC Amperes (AC1): 5/3
Contact Rating AC Voltage: A 120 / 120 MISCELLANEOUS
Contact Rating DC Amperes (DC1): V 5/3 Operating Position: Any
Contact Rating DC Voltage: A 28 / 28 Insulation Material: 94V-0 Molded plastic
Minimum Recommended Load: V 100 @ 5 VDC Enclosure Material: 94V-0 Polycarbonate
ma or 0.5 W Cover Protection Category: IP 40
TIMING Terminals: 0.10, 0.04 x 0.01
Inch (mm)
Operate Time: ms 25
(2.54, 1.01 x 0.25 )
Release Time: ms 20 Weight: grams 22 to 40
9/04
3 & 5 AMPS
6PDT
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
( TOP VIEW ) 4PDT
0.40
OUTLINE DIMENSIONS (10.2) 0.060 ± 0.002 DIA
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS) .
(1.5 ±0.5) DPDT
SOLDER / PLUG-IN
TERMINALS
0.42( 0.53
0.32 10.6) (13.4)
(8.1)
0.21 4 3 2 1
(5.3)
0.110 Mating Sockets
(2.7)
Elongated Hole 70-303-1, 70-305-1, 70-307-1: SOLDER
1.20 MAX. 0.100 x 0.040 70-304-1, 70-306-1, 70-308-1: PRINTED CIRCUIT
(30.3) (2 x 0.1) 0.45 See section 7
(11.43)
COIL MEASURED @ 25 ºC
STANDARD CONTACT NOMINAL NOMINAL
PART CONFIGU- INPUT RESISTANCE
PRINTED CIRCUIT 0.73 MAX.
(18.7) NUMBERS RATION VOLTAGE (OHMS)
TERMINALS
DC OPERATED COIL - SOLDER/PLUG-IN, 5 AMP
W67RCSX-1 DPDT 5 VDC 52 W
W67RCSX-2 DPDT 12 VDC 185 W
W67RCSX-3 DPDT 24 VDC 700 W
W67RCSX-4 DPDT 48 VDC 2,500 W
DIM W67RCSX-5 DPDT 110/125 VDC 15,000 W
A W67RCSX-6 4PDT 5 VDC 52 W
W67RCSX-7 4PDT 12 VDC 185W
W67RCSX-8 4PDT 24 VDC 700 W
W67RCSX-9 4PDT 48 VDC 2,500W
W67RCSX-10 4PDT 110/125 VDC 15,000 W
W67RCSX-12 6PDT 12 VDC 90W
3-48 UNC W67RCSX-13 6PDT 24 VDC 430 W
Thread DC OPERATED COIL-BIFURCATED CONTACTS, 3 AMP
W67TRCSX-2 DPDT 12 VDC 185 W
W67TRCSX-3 DPDT 24 VDC 700 W
W67TRCSX-7 4PDT 12 VDC 185 W
W67TRCSX-8 4PDT 24 VDC 700 W
W67TRCSX-12 6PDT 12 VDC 90 W
W67TRCSX-13 6PDT 24 VDC 430 W
DIMENSIONS DC OPERATED PRINTED CIRCUIT, 5 AMP
W67RPCX-2 DPDT 12 VDC 185 W
CONTACT W67RPCX-3 DPDT 24 VDC 700 W
A W67RPCX-7
CONFIGU 4PDT 12 VDC 185 W
W67RPCX-8 4PDT 24 VDC 700 W
W67RPCX-12 6PDT 12 VDC 90 W
1.374
0.978
6PDT (34.9) W67RPCX-13 6PDT 24 VDC 430 W
(24.8) AC OPERATED COIL - SOLDER/PLUG-IN, 5 AMP
W67ARCSX-5 DPDT 110/120 VAC, 50/60Hz 9000 W
1.156 W67ARCSX-10 4PDT 110/120 VAC, 50/60Hz 8000 W
4PDT
(29.4) W67ARCSX-15 6PDT 110/120 VAC, 50/60Hz 8000 W
DC OPERATED COIL ULTRA SENSITIVE -SOLDER/PLUG-IN, 3 AMP
0.978 W67SCSX-1 DPDT 9.4 MADC 1,000 W
DPDT
(24.8) W67SCSX-2 DPDT 6.4 MADC 2,500 W
W67SCSX-3 DPDT 4.5 MADC 5,000 W
W67SCSX-6 4PDT 13.7 MADC 1,000 W
W67SCSX-7 4PDT 9.1 MADC 2,500 W
W67SCSX-8 4PDT 6.5 MADC 5,000 W
9/04
RETROFITS POTTER & BRUMFIELD R10.
PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com SEE END OF SECTION 1 FOR CROSS REFERENCE 1...45
219 PLUG-IN RELAY WITH INTEGRAL LOCKING CLIP
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS) .
2.625 MAX
OPTIONAL MANUAL ACTUATOR * 24 VDC & 110 VDC Relays
Have Name Plates Stamped
0.250 3.062 MAX 24-28 & 110-125 VDC
(66.6) (77.77)
(6.35) Respectively. These Relays
Operate At 80% Of The
Lower Voltages And Operate
Within Allowable Temperature
Rises At 110% Of Higher
2.593 MAX Voltages. 250 VDC: Use
(65.5) 125 VDC Relay And Series
3.406 MAX
(86.5) Resistor ( 6000 W, 5 W )
Not Supplied.
6 1
7 12
219XBXP
DPDT
6 1
Mating Sockets
27390D, 33377D:
SCREW/PANEL/DIN
See section 7 7 12
F E AT U R E S B E N E F I T S
C US
UL Recognized
File No. E43641
VACUUM BAKED & DRY REMOVES CONTAMINANTS AND PROVIDES
NITROGEN FILLED A CLEAN & DRY ATMOSPHERE FOR CONTACTS.
C US
LISTED 367G
IND. CONT. EQ.
HERMETICALLY IDEAL FOR USE IN HAZARDOUS LOCATIONS.
WHEN USED WITH SEALED METAL UL CERTIFIED FOR CLASS 1 DIVISION 2 GROUP
SOCKETS:
70-464-1, 70-465-1, ENCLOSURE A, B, C & D HAZARDS.
70-750D8-1 & 70-750D11-1
CURRENT LIMITED
TO RATING OF WHEN USED WITH 70-464-1, 70-465-1, 70-750D8-1 OR
RELAY OR SOCKET
PLUG-IN STYLE
WHICHEVER IS LESS
70-750D11-1 SOCKETS,
MOUNTING
THE 750H CAN BE DIN RAIL MOUNTED OR PANEL MOUNTED.
CERTIFIED CLASS 1
DIVISION 2 FOR
HAZARDOUS LOCATIONS
UL GROUPS A, B, C & D
GENER AL SPECIFICATIONS (@ 25 ºC )
UNITS
COIL
Pull-in Voltage AC (50/60 Hz):< % of nominal 85 UNITS
Pull-in Voltage DC:< % of nominal 80 DIELECTRIC S TRENGTH
Dropout Voltage AC (50/60 Hz):> % of nominal 10 Coil to Contacts: V rms 1250
Dropout Voltage DC:> % of nominal 10 Across Open Contacts: V rms 500
Maximum Voltage: % of nominal 110 Pole to Pole: V rms 1250
Resistance: %± 10 Contacts to Frame: V rms Not applicable
Coil Power AC (60 Hz): VA 2.0 Insulation Resistance: megohms 1000 @ 500
Coil Power DC: W 1.2 minimum @VDC
Insulation System Per UL Standard 1446: Class B (130 ºC) TEMPER ATURE
Duty: Continuous Operating, AC Lower: ºC -45
Operating, AC Upper: ºC +55
CONTA
CONTACTS Operating, DC Lower: ºC -45
Contact Material: Silver alloy Operating, DC Upper: ºC +70
gold flashed Storage, Lower: ºC -45
Contact Rating AC Amperes (AC1): A 2 Pole-12, 3 Pole-10 Storage, Upper: ºC +105
Contact Rating AC Voltage: V 120 / 240
Contact Rating DC Amperes (DC1): A 10 LIFE EXPECTANC
EXPECTANCY Y
Contact Rating DC Voltage: V 30 Electrical @ Rated Load (AC1): operations 100,000
Horse Power (AC): HP 1/2 @ 120 Mechanical @ no Load : operations 5,000,000
Horse Power (AC): HP 1/3 @ 240
Minimum Recommended Load: ma 100 @ 5 VDC MISCELLANEOUS
or 0.5 W Operating Position: Any
TIMING Insulation Material: 94V-0 Molded plastic
Operate Time: ms 15 Enclosure Material: Steel
Release Time: ms 10 Cover Protection Category: IP 67
Weight: grams 130
9/04
8 PIN
Mating Sockets
70-750D8-1, 70-750D11-1,
70-464-1, 70-465-1: SCREW/DIN
70-169-1, 70-170-1: SCREW/PANEL
See Section 7
COIL MEASURED @ 25 ºC
STANDARD CONTACT NOMINAL
NOMINAL
PART NUMBERS CONFIGU- RESISTANCE
INPUT
RATION VOLTAGE (OHMS)
NEW PART NUMBER SUPERCEDES
AC OPERATED - 8 PIN OCTAL, 12 AMP
750XBXH-12A DPDT 12 VAC, 50/60Hz 72 W
750XBXH-24A DPDT 24 VAC, 50/60Hz 1,700 W
750XBXH-120A W88AHPX-24 DPDT 110/120 VAC, 50/60Hz 9,100 W
DC OPERATED - 8 PIN OCTAL, 12 AMP
750XBXH-12D W88HPX-33 DPDT 12 VDC 120 W
750XBXH-24D W88HPX-34 DPDT 24 VDC 470 W
750XBXH-110/125D DPDT 110/125 VDC 10,000 W
AC OPERATED - 11 PIN OCTAL, 10 AMP
750XCXH-12A 3PDT 12 VAC, 50/60Hz 72 W
750XCXH-24A 3PDT 24 VAC, 50/60Hz 1,700 W
750XCXH-120A *W88AHPX-36 3PDT 110/120 VAC, 50/60Hz 9,100 W
DC OPERATED - 11 PIN OCTAL, 10 AMP
750XCXH-12D 3PDT 12 VDC 120 W
750XCXH-24D *W88HPX-51 3PDT 24 VDC 470 W
750XCXH-110/125D 3PDT 110/125 VDC 10,000 W
* SOCKET CONNECTIONS TO TERMINALS 5 & 6 (21 & 22) MUST BE REVERSED 9/04
MAGNECRAFT IDEC
& STRUTHERS-DUNN
781XAXM4L-24A RH1B-L-AC24
781XAXM4L120A RH1B-L-AC120
781XAXM4L-220/230A RH1B-L-AC240
781XAXM4L-240A RH1B-L-AC240
781XAXM4L-12D RH1B-L-DC12
781XAXM4L-24D RH1B-L-DC24
781XAXM4L-110D RH1B-L-DC110
781XAXTM4L-120A RH1V2-L-AC120
781XAXTM4L-12D RH1V2-L-DC12
781XAXTM4L-24D RH1V2-L-DC24
781XAXC-24A RH1B-U-AC24
781XAXC-120A RH1B-U-AC120
781XAXC-24D RH1B-U-DC24
MAGNECRAFT
& STRUTHERS-DUNN OMRON RELECO
782XAXM4L-12A C7-A10X/AC12
782XAXM4L-24A C7-A10X/AC24
782XAXM4L120A C7-A10X/AC115
782XAXM4L-220/230A C7-A10X/AC230
782XAXM4L-240A
782XAXM4L-12D C7-A10X/DC12
782XAXM4L-24D C7-A10X/DC24
782XAXM4L-110D C7-A10X/DC110
782XAXTM4L-12A C7-A10PX/AC12
782XAXTM4L-24A C7-A10PX/AC24
782XAXTM4L120A C7-A10PX/AC115
782XAXTM4L-12D C7-A10PX/DC12
782XAXTM4L-24D C7-A10PX/DC24
782XAXTM4L-110D C7-A10PX/DC110
782XAXC-12A LY1-AC12
782XAXC-24A LY1-AC24
782XAXC120A LY1-AC110/120
782XAXC-220/230A LY1-AC220/240
782XAXC-240A LY1-AC220/240
782XAXCL-24A LY1N-AC24
782XAXCL120A LY1N-AC110/120
782XAXCL-240A LY1N-AC220/240
782XAXC-12D LY1-DC12
782XAXC-24D LY1-DC24
782XAXC-110D LY1-DC110
782XAXTCL-24D LY1N-DC24
782XAXTC-12A LY1-0-AC12
782XAXTC-24A LY1-0-AC24
782XAXTC-120A LY1-0-AC110/120
782XAXTC-12D LY1-0-DC12
782XAXTC-24D LY1-0-DC24
782XAXTC-110D LY1-0-DC110
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
9/04 CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
1...50
SECTION 1
CROSS REFERENCE GUIDE
MAGNECRAFT
& STRUTHERS-DUNN OMRON FINDER RELECO IDEC RELPOL
782XBXM4L-24A LY212N-AC24 56.32.8024.20.94 C7-A20X/AC24 RY2-1012-26-5024-WTL
782XBXM4L120A LY212N-AC120 56.32.8120.20.94 C7-A20X/AC120 RY2-1012-26-5120-WTL
782XBXM4L-220/230A 56.32.8230.20.94 C7-A20X/AC230 RY2-1012-26-5230-WTL
782XBXM4L-240A 56.32.8240.20.94 RY2-1012-26-5240-WTL
782XBXM4L-12D LY212N-DC12 56.32.9012.20.94 C7-A20X/DC12 RY2-1012-26-1012-WTL
782XBXM4L-24D LY212N-DC24 56.32.9024.20.94 C7-A20X/DC24 RY2-1012-26-1024-WTL
782XBXM4L-110D 56.32.9110.20.94 C7-A20X/DC110 RY2-1012-26-1110-WTL
782XBXC-6A LY2-AC06 RH2B-U-AC6 RY2-1006-26-5006
782XBXC-24A LY2-AC24 RH2B-U-AC24 RY2-1012-26-5024
782XBXC120A LY2-AC110/120 RH2B-U-AC120 RY2-1012-26-5120
782XBXC220/230A LY2-AC220/240 RH2B-U-AC240 RY2-1012-26-5230
782XBXC240A LY2-AC220/240 RH2B-U-AC240 RY2-1012-26-5240
782XBXC-6D LY2-DC06 RH2B-U-DC6 RY2-1012-26-5006
782XBXC-12D LY2-DC12 RH2B-U-DC12 RY2-1012-26-1012
782XBXC-24D LY2-DC24 RH2B-U-DC24 RY2-1012-26-1024
782XBXC48D LY2-DC48 RH2B-U-DC48 RY2-1012-26-1048
782XBXC-110D LY2-DC110 RH2B-U-DC110 RY2-1012-26-1110
782XBXTC-24A LY2-0-AC24 C7-A20X/AC24 RH2V2-AC24
782XBXTC120A LY2-0-AC120 C7-A20X/AC115 RH2V2-AC120
782XBXTC-6D LY2-0-DC06 RH2V2-DC6
782XBXTC-12D LY2-0-DC12 C7-A20X/DC12 RH2V2-DC12
782XBXTC-24D LY2-0-DC24 C7-A20X/DC24 RH2V2-DC24
MAGNECRAFT OMRON FINDER RELECO IDEC
& STRUTHERS-DUNN
783XCXM4L-24A RH3B-ULC-AC24
783XCXM4L-120A RH3B-ULC-AC120
783XCXM4L-220/230A
783XCXM4L-240A RH3B-ULC-AC240
783XCXM4L-12D RH3B-ULC-DC12
783XCXM4L-24D RH3B-ULC-DC24
783XCXM4L-110D RH3B-ULC-DC110
783XCXTM4L-120A RH3V2-ULC-AC120
783XCXTM4L-12D RH3V2-ULC-DC12
783XCXTM4L-24D RH3V2-ULC-DC24
783XCXC-24A LY3-AC24 RH3B-U-AC24
783XCXC-120A LY3-AC120 RH3B-U-AC120
783XCXC-240A LY3-AC240 RH3B-U-DC24
MAGNECRAFT OMRON FINDER RELECO IDEC
& STRUTHERS-DUNN
784XDXM4L-24A LY412N-AC24 56.34.8024.20.94 RH4B-ULC-AC24
784XDXM4L-120A LY412N-AC120 56.34.8120.20.94 RH4B-ULC-AC120
784XDXM4L-220/230A 56.34.8230.20.94
784XDXM4L-240A 56.34.8240.20.94 RH4B-ULC-AC240
784XDXM4L-12D LY412N-DC12 56.34.9012.20.94 RH4B-ULC-DC12
784XDXM4L-24D LY412N-DC24 56.34.9024.20.94 RH4B-ULC-DC24
784XDXM4L-110D 56.34.9110.20.94 RH4B-ULC-DC110
784XDXTM4L-120A 56.44.8120.20.94 RH4V2-ULC-AC120
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04
1...51
SECTION 1
CROSS REFERENCE GUIDE
782XDX3M4L-24A C9-T48X/AC24
782XDX3M4L120A C9-T48X/AC115
782XDX3M4L-220/230A C9-T48X/AC230
782XDX3M4L-240A
782XDX3M4L-12D C9-T48X/DC12
782XDX3M4L-24D C9-T48X/DC24
782XDX3M4L-110D C9-T48X/DC110
782XDX1M4L-24A C9-A48X/AC24
782XDX1M4L120A C9-A48X/AC115
782XDX1M4L-220/230A C9-A48X/AC230
782XDX1M4L-240A
782XDX1M4L-12D C9-A48X/DC12
782XDX1M4L-24D C9-A48X/DC24
782XDX1M4L-110D C9-A48X/DC110
782XDX2M4L-24A 55.34.8024.20.94 C9-T48X/AC24 PT570524 R4-2014-23-5024-WTL
782XDX2M4L120A 55.34.8120.20.94 C9-T48X/AC115 PT570615 R4-2014-23-5012-WTL
782XDX2M4L-220/230A 55.34.8230.20.94 C9-T48X/AC230 PT570730 R4-2014-23-5030-WTL
782XDX2M4L-240A 55.34.8240.20.94 PT570730 R4-2014-23-5040-WTL
782XDX2M4L-12D 55.34.9012.20.94 C9-T48X/DC12 PT570012 R4-2014-23-1012-WTL
782XDX2M4L-24D 55.34.9024.20.94 C9-T48X/DC24 PT570024 R4-2014-23-1024-WTL
782XDX2M4L-110D 55.34.9110.20.94 C9-T48X/DC110 PT570110 R4-2014-23-1110-WTL
782XDX3C-12A MY4Z-AC-12
782XDX3C-24 MY4Z-AC-24
782XDX3C-120A MY4Z-AC-120
782XDX3C-220/230A MY4Z-AC-220/230
782XDX3C-240A MY4Z-AC-240
782XDX3C-6D MY4Z-DC-6
782XDX3C-12D MY4Z-DC-12
782XDX3C-24D MY4Z-DC-24
782XDX3C-110D MY4Z-DC-110
782XDX1C-12A MY4-AC-12
782XDX1C-24 MY4-AC-24
782XDX1C-120A MY4-AC-120
782XDX1C-220/230A MY4-AC-220/230
782XDX1C-240A MY4-AC-240
782XDX1C-6D MY4-DC-6
782XDX1C-12D MY4-DC-12
782XDX1C-24D MY4-DC-24
782XDX1C-110D MY4-DC-110
782XDX2C-12A MY4-AC-12 R4-2014-23-5012
782XDX2C-120A MY4-AC-120 R4-2014-23-5120
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
9/04 CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
1...52
SECTION 1
CROSS REFERENCE GUIDE
MAGNECRAFT ALLEN-
& STRUTHERS-DUNN OMRON FINDER RELECO TYCO / SCHRACK RELPOL BRADLEY
782XDX2C-220/230A MY4-AC220/240 R4-2014-23-5012
782XDX2C-240A MY4-AC240 R4-2014-23-5120
782XDX2C-12D MY4-DC12 R4-2014-23-5230
782XDX2C-24D MY4-DC24 R4-2014-23-5240
782XDX2C-110D MY4-DC110 R4-2014-23-1012
782XDXT1C-24A MY4-02-AC24 R4-2014-23-1024
782XDXT1C-120A MY4-02-AC120 R4-2014-23-1110
782XDXT1C-12D MY4-02-DC12
782XDXT1C-24D MY4-02-DC24
782XDXT1C-110D MY4-02-DC110
782XBX3M4L-24A C9-T28X/AC24
782XBX3M4L-120A C9-T28X/AC115
782XBX3M4L-220/230A C9-T28X/AC230
782XBX3M4L-240A
782XBX3M4L-12D C9-T28X/DC12
782XBX3M4L-24D C9-T28X/DC24
782XBX3M4L-110D C9-T28X/DC110
782XBX2M4L-24A 55.32.8024.20.94 C9-A20X/AC24 PT270524 R2-2012-23-5024-WTL 700-HC24A24-1-4
782XBX2M4L-120A 55.32.8120.20.94 C9-A20X/AC115 PT270615 R2-2012-23-5120-WTL 700-HC24A1-1-4
782XBX2M4L-220/230A 55.32.8230.20.94 C9-A20X/AC230 PT270730 R2-2012-23-5230-WTL 700-HC24A2-1-4
782XBX2M4L-240A 55.32.8240.20.94 PT270730 R2-2014-23-5240-WTL 700-HC24A2-1-4
782XBX2M4L-12D 55.32.9012.20.94 C9-A20X/DC12 PT270012 R2-2012-23-1012-WTL 700-HC24Z12-1-4
782XBX2M4L-24D 55.32.9024.20.94 C9-A20X/DC24 PT270024 R2-2012-23-1024-WTL 700-HC24Z24-1-4
782XBX2M4L-110D 55.32.9110.20.94 C9-A20X/DC110 PT270110 R2-2012-23-1110-WTL 700-HC24Z1-1-4
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04
1...53
SECTION 1
CROSS REFERENCE GUIDE
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
9/04 CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
1...54
SECTION 1
CROSS REFERENCE GUIDE
MAGNECRAFT TYCO /
& STRUTHERS-DUNN OMRON POTTER & BRUMFIELD IDEC DELTROL
A283XCXC-240A MJN3C-AC240 KUP14A15 (or F) - 240 RR3B-U-AC240V 20308-85
A283XAXC-12D MJN1C-DC12 KUP5D15 (or F) - 12 RR1BA-U-DC12V 20309-81
A283XAXC-24D MJN1C-DC24 KUP5D15 (or F) - 24 RR1BA-U-DC24V 20309-82
A283XBXC-12D MJN2C-DC12 KUP11D15 (or F) - 12 RR2BA-U-DC12V 20310-81
A283XBXC-24D MJN2C-DC24 KUP11D15 (or F) - 24 RR2BA-U-DC24V 20310-82
A283XBXC-110D MJN2C-DC110 KUP11D15 (or F) - 110 RR2B-U-DC110V 20310-84
A283XCXC-12D MJN3C-DC12 KUP14D15 (or F) - 12 RR3B-U-DC12V 20311-81
A283XCXC-24D MJN3C-DC24 KUP14D15 (or F) - 24 RR3B-U-DC24V 20311-82
A283XAXC1-120A MJN1CF-AC120 KUP5A55 (or F) - 120 RR1BA-US-AC120V 20545-84
A283XAXC1-240A MJN1CF-AC240 KUP5A55 (or F) - 240 RR1BA-US-AC240V 20545-85
A283XBXC1-120A MJN2CF-AC120 KUP11A55 (or F) - 120 RR2BA-US-AC120V 20546-84
A283XBXC1-240A MJN2CF-AC240 KUP11A55 (or F) - 240 RR2BA-US-AC240V 20546-85
A283XCXC1-120A MJN3CF-AC120 KUP14A55 (or F) - 120 RR3B-US-AC120V 20547-84
A283XCXC1-240A MJN3CF-AC240 KUP14A55 (or F) - 240 RR1BA-US-DC240V 20547-85
A283XAXC1-12D MJN1CF-DC12 KUP5D55 (or F) - 12 RR1BA-US-DC12V 20551-81
A283XAXC1-24D MJN1CF-DC24 KUP11D55 (or F) - 24 RR2BA-US-DC24V 20551-82
A283XBXC1-12D MJN2CF-DC12 KUP11D55 (or F) - 12 RR2BA-US-DC12V 20552-81
A283XBXC1-24D MJN2CF-DC24 KUP11D55 (or F) - 24 RR2B-US-DC24V 20552-82
A283XCXC1-24D MJN3CF-DC24 KUP14D55 (or F) - 24 RR3B-US-DC24V 20553-82
A283XBX69C-120A KUEP-11A15-120
A283XBX69C-12D KUEP-11D15-12
A283XBX69C-24D KUEP-11D15-24
A283BXX69C-24D KUEP-7D15-24
A283BXX69C-48D KUEP-7D15-48
A283XBX69C-110D KUEP-11D15-110
A283HXX69C-120A KUEP-3A15-120
A283HXX69C-12D KUEP-3D15-12
A283HXX69C-24D KUEP-3D15-24
A283HXX69C-48D KUEP-3D15-48
A283HXX69C-110D KUEP-3D15-110
MAGNECRAFT TYCO / TYCO /
& STRUTHERS-DUNN POTTER & BRUMFIELD SCHRACK FINDER
388JXCXC1M-240A KUMP-14A68-240 RM333740
388JXCXC1M-120A KUMP-14A68-120 RM333615
388JXCXC1M-12D KUMP-14D68-12 RM333012
388JXCXC1M-24D KUMP-14D68-24 RM333024
388JXCXCM-240A KUMP-14A28-240 RM332740 6233 8240 0040
388JXCXCM-120A KUMP-14A28-120 RM332615 6233 8120 0040
388JXCXCM-12D KUMP-14D28-12 RM332012 6233 9012 0040
388JXCXCM-24D KUMP-14D28-24 RM332024 6233 9024 0040
388JXBXC1M-240A KUMP-11A68-240 RM233740
388JXBXC1M-120A KUMP-11A68-120 RM233615
388JXBXC1M-12D KUMP-11D68-12 RM233012
388JXBXC1M-24D KUMP-11D68-24 RM233024
388JXBXCM-240A KUMP-11A28-240 RM232740 6232 8240 0040
388JXBXCM-120A KUMP-11A28-120 RM232615 6232 8120 0040
388JXBXCM-12D KUMP-11D28-12 RM232012 6232 9012 0040
388JXBXCM-24D KUMP-11D28-24 RM232024 6232 9024 0040
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04
1...55
SECTION 1
CROSS REFERENCE GUIDE
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
9/04 CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
1...56
SECTION 1
CROSS REFERENCE GUIDE
MAGNECRAFT DELTROL
& STRUTHERS-DUNN
300XBXC1-110D 20852-84
300XBXC1-24D 20852-82
300XBXC1-12D 20852-81
MAGNECRAFT TYCO /
& STRUTHERS-DUNN POTTER & BRUMFIELD
W67RCSX-1 R10E1(X or Y)2-V28
W67RCSX-2 R10E1(X or Y)2-V185
W67RCSX-3 R10E1(X or Y)2-V700
W67RCSX-4 R10E1(X or Y)2-V2.5K
W67RCSX-5 R10E1(X or Y2-V15.0K
W67RCSX-6 R10E1(X or Y)4-V28
W67RCSX-7 R10E1(X or Y)4-V185
W67RCSX-8 R10E1(X or Y)4-V700
W67RCSX-9 R10E1(X or Y)4-V2.5K
W67RCSX-10 R10E1(X or Y)4-V15.0K
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04
1...57
SECTION 1
CROSS REFERENCE GUIDE
MAGNECRAFT TYCO /
& STRUTHERS-DUNN POTTER & BRUMFIELD
W67RCSX-12 R10E1(X or Y)6-V90 U . S. A.
W67RCSX-13 R10E1(X or Y)6-V430 MAGNECRAFT & STRUTHERS-DUNN
W67TRCSX-2 R10E1(P or Z)2-V185 700 ORANGE STREET
R10E1(P or Z)2-V700 DARLINGTON, SC. 29532-3739
W67TRCSX-3
TEL.: (843) 393-5421 FAX: (843) 393-4123
W67TRCSX-7 R10E1(P or Z)4-V185
WEBSITE: www.magnecraft.com
W67TRCSX-8 R10E1(P or Z)4-V700 EMAIL: info@magnecraft.com
W67TRCSX-12 R10E1(P or Z)6-V90
W67TRCSX-13 R10E1(P or Z)6-V430
W67RPCX-2 R10E2(X or Y)2-V185 EUR OPE
W67RPCX-3 R10E2(X or Y)2-V700 MAGNECRAFT & STRUTHERS-DUNN
R10E2(X or Y)4-V185 OFFICE MUNICH
W67RPCX-7
FORSTENRIEDER ALLEE 227
W67RPCX-8 R10E2(X or Y)4-V700
D 81476 MUNCHEN/GERMANY
W67RPCX-12 R10E2(X or Y)6-V90 TEL.: 4989 75080310 FAX: 4989 7559344
W67RPCX-13 R10E2(X or Y)6-V430 EMAIL: renatesteinback@magnecraft.de
W67ARCSX-5 R10E1(X or Y)2-120V
W67ARCSX-10 R10E1(X or Y)4-120V
W67ARCSX-15 R10E1(X or Y)6-120V
W67SCSX-1 R10SE1(X or Y)2-J1.0K
W67SCSX-2 R10SE1(X or Y)2-J2.5K
W67SCSX-3 R10SE1(X or Y)2-J5.0K
W67SCSX-6 R10SE1(X or Y)4-J1.0K
W67SCSX-7 R10SE1(X or Y)4-J2.5K
W67SCSX-8 R10SE1(X or Y)4-J5.0K
MAGNECRAFT TYCO /
& STRUTHERS-DUNN POTTER & BRUMFIELD FOR SOCKET COMPATIBLE AND
750XBXH-12A KR11AGE (or GF) 12 FLANGE MOUNTED RELAYS
750XBXH-24A KR11AGE (or GF) 24 APPLICATION ENGINEERING
750XBXH-120A KR11AGE (or GF) 120 A SSIS TANCE
750XBXH-12D KR11DGE (or GF) 12
750XBXH-24D KR11DGE (or GF) 24 Chuck Johnson, PRODUCT MANAGER
750XBXH-110D KR11DGE (or GF) 110 FAX: (847) 441-2522
750XCXH-12A KR14AGE (or GF) 12 EMAIL: cjohnson@magnecraft.com
750XCXH-24A KR14AGE (or GF) 24
750XCXH-120A KR14AGE (or GF) 120 Joe Zintel, PRODUCT MANAGER
750XCXH-12D KR14DGE (or GF) 12 FAX: (847) 441-2522
750XCXH-24D KR14DGE (or GF) 24
EMAIL: jzintel@magnecraft.com
750XCXH-110D KR14DGE (or GF) 110
MAGNECRAFT TYCO /
& STRUTHERS-DUNN POTTER & BRUMFIELD
W21ACPX-2 136-62T3A1
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
9/04 CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
1...58