DMP 331

Industrial
Pressure Transmitter
for Low Pressure

Stainless Steel Sensor

accuracy according to IEC 60770:

standard: 0.35 % FSO
option: 0.25 / 0.1 % FSO

Nominal pressure The pressure transmitter DMP 331 can be used

in all industrial areas when the medium is
► from 0 ... 100 mbar up to 0 ... 60 bar compatible with stainless steel 1.4404 (316 L)
or 1.4435 (316 L). Additional are different
Output signals elastomer seals as well as a helium tested
2-wire: 4 ... 20 mA welded version available.

3-wire: 0 … 20 mA / 0 … 10 V The modulare concept of the device allows to

others on request combine different stainless steel sensors and
electronic modules with a variety of electrical
Special characteristic and mechanical versions.Thus a diversity of
variations is created, meeting almost all
► perfect thermal behaviour
requirements in industrial applications.
► excellent long term stability
► pressure port Preferred areas of use are
G 1/2" flush from 100 mbar
Plant and machine engineering
Optional versions
Environmental engineering
► IS-version (water - sewage - recycling)
Ex ia = intrinsically safe
for gases and dusts Energy industry

► SIL 2-according to
IEC 61508 / IEC 61511
► welded pressure sensor
► customer specific versions

BD SENSORS GmbH
BD-Sensors-Straße 1 Tel.: +49 (0) 92 35 / 98 11- 0 www.bdsensors.de
D - 95199 Thierstein Fax: +49 (0) 92 35 / 98 11- 11 info@bdsensors.de
DMP 331
Industrial Pressure Transmitter Technical Data

Input pressure range

Nominal pressure gauge [bar] -1…0 0.10 0.16 0.25 0.40 0.60 1 1.6
Nominal pressure abs. [bar] - - - - 0.40 0.60 1 1.6
Overpressure [bar] 5 0.5 1 1 2 5 5 10
Burst pressure ≥ [bar] 7.5 1.5 1.5 1.5 3 7.5 7.5 15

Nominal pressure
2.5 4 6 10 16 25 40 60
gauge / abs. [bar]
Overpressure [bar] 10 20 40 40 80 80 105 105
Burst pressure ≥ [bar] 15 25 50 50 120 120 210 210
Vacuum resistance pN ≥ 1 bar: unlimited vacuum resistance
pN < 1 bar: on request

Output signal / Supply

Standard 2-wire: 4 ... 20 mA / VS = 8 ... 32 VDC SIL-version: VS = 14 … 28 VDC
Option IS-protection 2-wire: 4 ... 20 mA / VS = 10 ... 28 VDC SIL-version: VS = 14 … 28 VDC
Options 3-wire 3-wire: 0 ... 20 mA / VS = 14 ... 30 VDC
0 ... 10 V / VS = 14 ... 30 VDC
Performance
Accuracy 1 standard: nominal pressure < 0.4 bar: ≤ ± 0.50 % FSO
nominal pressure ≥ 0.4 bar: ≤ ± 0.35 % FSO
option 1: nominal pressure ≥ 0.4 bar: ≤ ± 0.25 % FSO
option 2: for all nominal pressure ranges: ≤ ± 0.10 % FSO
Permissible load current 2-wire: Rmax = [(VS – VS min) / 0.02 A] 
current 3-wire: Rmax = 240 
voltage 3-wire: Rmin = 10 k
Influence effects supply: 0.05 % FSO / 10 V
load: 0.05 % FSO / k
Long term stability ≤ ± 0.1 % FSO / year at reference conditions
Response time 2-wire: ≤ 10 msec
3-wire: ≤ 3 msec
1
accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability)
Thermal effects (offset and span)
Nominal pressure pN [bar] -1 … 0 < 0.40 ≥ 0.40
Tolerance band [% FSO] ≤ ± 0.75 ≤±1 ≤ ± 0.75
in compensated range [°C] -20 ... 85 0 ... 70 -20 … 85
Permissible temperatures
Medium -40 ... 125 °C
Electronics / environment -40 ... 85 °C
Storage -40 ... 100 °C
Electrical protection
Short-circuit protection permanent
Reverse polarity protection no damage, but also no function
Electromagnetic compatibility emission and immunity according to EN 61326
Mechanical stability
Vibration 10 g RMS (25 ... 2000 Hz) according to DIN EN 60068-2-6
Shock 500 g / 1 msec according to DIN EN 60068-2-27
Materials
Pressure port stainless steel 1.4404 (316 L)
Housing stainless steel 1.4404 (316 L)
Option compact field housing stainless steel 1.4301 (304)
cable gland M12x1.5, brass, nickel plated (clamping range 2 … 8 mm)
Seals standard: FKM
options: EPDM
welded version 2 (for pN ≤ 40 bar)
others on request
Diaphragm stainless steel 1.4435 (316 L)
Media wetted parts pressure port, seals, diaphragm
2
welded version only with pressure ports according to EN 837, pN ≤ 40 bar

pressure and level

DMP 331
Industrial Pressure Transmitter Technical Data

Explosion protection (only for 4 … 20 mA / 2-wire)

Approvals IBExU 10 ATEX 1068 X / IECEx IBE 12.0027X
DX19-DMP 331 zone 0: II 1G Ex ia IIC T4 Ga
zone 20: II 1D Ex ia IIIC T135 °C Da
Safety technical maximum values Ui = 28 V, Ii = 93 mA, Pi = 660 mW, Ci ≈ 0 nF, Li ≈ 0 H,
the supply connections have an inner capacity of max. 27 nF to the housing
Permissible temperatures for in zone 0: -20 ... 60 °C with patm 0.8 bar up to 1.1 bar
environment in zone 1 or higher: -40/-20 ... 70 °C
Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 160 pF/m
cable inductance: signal line/shield also signal line/signal line: 1 H/m
Miscellaneous
Option SIL2 version 3 according to IEC 61508 / IEC 61511
Current consumption signal output current: max. 25 mA
signal output voltage: max. 7 mA
Weight approx. 200 g
Installation position any 4
Operational life 100 million load cycles
CE-conformity EMC Directive: 2014/30/EU
ATEX Directive 2014/34/EU
3
only for 4 … 20 mA / 2-wire, not in combination with accuracy 0.1 %
4
Pressure transmitters are calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight
deviations in the zero point for pressure ranges pN ≤ 1 bar.
Wiring diagrams
2-wire-system (current) 3-wire-system (current / voltage)
supply + supply +
p p
VS
VS
supply –
supply –
I/U A/V
I signal +

Pin configuration
Electrical connection ISO 4400 Binder 723 M12x1 / metal Bayonet MIL-C-26482
(5-pin) (4-pin) (10-6)

2-wire 3-wire
Supply + 1 3 1 A A
Supply – 2 4 2 B D
Signal + (for 3-wire) 3 1 3 - B
Shield ground pin 5 4 pressure port

Electrical connection compact field housing

cable colours (IEC 60757)

VS+ VS- S+ GND

Supply + VS+ WH (white)

Supply – VS- BN (brown)
Signal + (for 3-wire) S+ GN (green)
Shield GND GNYE (green-yellow)

www.bdsensors.de
DMP 331
Industrial Pressure Transmitter Technical Data

Electrical connections (dimensions mm / in)

ISO 4400 Binder series 723, 5-pin M12x1, 4-pin

(IP 65) (IP 67) (IP 67)

Bayonet MIL-C-26482 (10-6) cable outlet with PVC cable cable outlet, cable with
(IP 67) (IP 67) 5 ventilation tube (IP 68) 6

compact field housing

(IP 67)

 universal field housing stainless steel 1.4404 (316 L) with cable gland M20x1.5 (ordering code 880) and other versions on request

5
standard: 2 m PVC cable without ventilation tube (permissible temperature: -5 ... 70 °C)
6
different cable types and lengths available, permissible temperature depends on kind of cable

pressure and level

DMP 331
Industrial Pressure Transmitter Technical Data

Dimensions (mm / in)

standard SIL- and SIL-IS version

© 2021 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.
*
*

* with electrical connection Bayonet MIL-C-26482 (10-6) increases the length of devices by 5 mm

Mechanical connections (dimensions mm / in)

G1/2" DIN 3852 G1/2" EN 837 1/2" NPT

G1/4" DIN 3852 G1/4" EN 837 1/4" NPT

 metric threads and

other versions on
request

G1/2" open port DIN 3852 G1/2" flush DIN 3852

(pN ≤ 40 bar) (pN ≤ 40 bar)

DMP331_E_141021

Tel.: +49 (0) 92 35 / 98 11- 0 www.bdsensors.de

Fax: +49 (0) 92 35 / 98 11- 11 info@bdsensors.de www.bdsensors.de
 Ordering code DMP 331
DMP 331 - - - - - - -
Pressure
gauge 1 1 0
absolute 1 1 1 1
Input [bar]
0.10 1 1 0 0 0
0.16 1 1 6 0 0
0.25 1 2 5 0 0
0.40 4 0 0 0
0.60 6 0 0 0
1.0 1 0 0 1
1.6 1 6 0 1
2.5 2 5 0 1
4.0 4 0 0 1
6.0 6 0 0 1
10 1 0 0 2
16 1 6 0 2

© 2020 BD|SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.
25 2 5 0 2
40 4 0 0 2
60 6 0 0 2
-1 … 0 X 1 0 2
customer 9 9 9 9 consult
Output
4 … 20 mA / 2-wire 1
0 … 20 mA / 3-wire 2
0 … 10 V / 3-wire 3
intrinsic safety 4 … 20 mA / 2-wire E
SIL2 4 … 20 mA / 2-wire 1S
SIL2 with intrinsic safety
ES
4 … 20 mA / 2-wire
customer 9 consult
Accuracy
standard for p N ≥ 0.4 bar: 0.35 % FSO 3
standard for p N< 0.4 bar: 0.50 % FSO 5
option 1 for pN ≥ 0.4 bar: 0.25 % FSO 2
option 2: 0.10 % FSO 2 1
customer 9 consult
Electrical connection
male and female plug ISO 4400 1 0 0
male plug Binder series 723 (5-pin) 2 0 0
cable outlet with PVC cable (IP67) 3 T A 0
cable outlet,
T R 0
cable with ventilation tube (IP68) 4

male plug M12x1 (4-pin) / metal M 1 0

Bayonet MIL-C-26482 (10-6); 2 wire B G 0
Bayonet MIL-C-26482 (10-6); 3 wire B G 4
compact field housing
8 5 0
stainless steel 1.4301 (304)
customer 9 9 9 consult
Mechanical connection
G1/2" DIN 3852 1 0 0
G1/2" EN 837 2 0 0
G1/4" DIN 3852 3 0 0
G1/4" EN 837 4 0 0
G1/2" DIN 3852
5 F 0 0
with flush sensor
5
G1/2" DIN 3852 open pressure port H 0 0
1/2" NPT N 0 0
1/4" NPT N 4 0
customer 9 9 9 consult
Seals
FKM 1
EPDM 3
without (welded version) 5, 6 2
customer 9 consult
Special version
standard 0 0 0
customer 9 9 9 consult

1
absolute pressure possible from 0.4 bar
2
not in combination with SIL
3
standard: 2 m PVC cable without ventilation tube (permissible temperature: -5 … 70°C), others on request
4
code TR0 = PVC cable, cable with ventilation tube available in different types and lengths
5
only for pN ≤ 40 bar
6
welded version only with pressure ports according to EN 837

01.04.2020