x670 g2 Data Sheet

Data Sheet
Highlights
Business Alignment
• X670-G2-48x-4q – 48 ports of 1/10Gb
SFP+ with 4 ports of 10/40Gb QSFP+
• X670-G2-72x – 72 ports of 1/10Gb
SFP+ in 1 RU form factor
Operational Efficiency
• Full ExtremeXOS® feature set
supporting switching, routing, SDN,
Data Center Bridging, MPLS, and
Audio Video Bridging
ExtremeSwitching™ X670-G2 Series
• Controlling aggregation switch for Scalable advanced 10Gb aggregation switch.
V300 and V400 edge devices with
Extreme Extended Edge Switching
• SummitStack™ support enables
Product Overview
flexible stacking configurations The ExtremeSwitching X670-G2 product family provides high density
with other stackable ExtremeXOS 10 Gigabit Ethernet and 40 Gigabit Ethernet switching in a small 1RU form
product lines
factor. With its versatile design, the ExtremeSwitching X670-G2 provides
• IEEE 1588 PTP Timing with integrated high density Layer 2/3 10Gb networking with low latency cut-through
timing output ports switching, and IPv4 and IPv6 unicast and multicast routing. This enables
• All configurations provide non- the X670-G2 to be flexibly deployed in enterprise aggregation or core
blocking, line rate performance backbone environments. The X670-G2 can additionally serve as
• Low latency cut-through mode the controlling aggregation switch within Extreme's Extended Edge
• Front-to-Back or Switching solution.
Back-to-Front airflow
The X670-G2 comes in two models:
• X670-G2-48x-4q – 48 ports of 1/10Gb SFP+ with 4 ports of
10/40Gb QSFP+
• X670-G2-72x – 72 ports of 1/10Gb SFP+ in 1 RU form factor
The X670-G2-48x-4q supports four QSFP+ ports of 40 GbE. Each 40

Gigabit Ethernet port can be independently configured as 40 Gigabit
Ethernet or 4 x 10 Gigabit Ethernet.
The X670-G2-72x model supports 72 ports of native 1Gb/10Gb SFP+ ports

in a single compact system without the requirement to use break-out
cables to achieve high density 10Gb connections.
High-Performance Stacking
The X670-G2 supports 4 different methods of stacking: SummitStack-V,
SummitStack-V80, SummitStack-V160, and SummitStack-V320.
SummitStack-V—Flexible Stacking Over 10 Gigabit Ethernet

ExtremeXOS supports the SummitStack-V capability using 2 of the
native 10 GbE ports on the faceplate as stacking ports, enabling the
use of standard cabling and optics technologies used for 10 GbE SFP+,
SummitStack-V provides long-distance stacking connectivity of up to 40
WWW.EXTREMENETWORKS.COM 1
km while reducing the cable complexity of implementing a Low Latency Switching for Cluster Computing
stacking solution. SummitStack-V is compatible with X440,
The X670-G2 can achieve latency less than 600
X440-G2, X450, X450-G2, X460, X460-G2, X480, X670,
nanoseconds and supports cut-through switching for
X670V, and X770 switches running the same version of
latency-sensitive cluster computing.
ExtremeXOS. SummitStack-V enabled 10 GbE ports must
be physically direct-connected.
Extended Edge Switching
SummitStack-V80/V160/V320—Flexible Stacking The X670-G2 supports Extreme Extended Edge Switching,
Over 40 Gigabit Ethernet an innovative solution that simplifies the deployment and
The X670-G2-48x-4q also supports high-speed 80Gbps, operation of edge switches. With this solution, the X670-G2
160 Gbps, and 320Gbps stacking using QSFP+ ports, can be meshed with economical V300 or V400 Series
which is ideal for demanding applications where a high access devices to form a single logical switch. Advanced
volume of traffic traverses through the stacking links, X670-G2 services can then be seamlessly delivered to the
yet bandwidth is not compromised through stacking. V300 or V400 edge switches. The result is a simplified
SummitStack-V80, -V160, and -V320 can support passive operational model that reduces costs.
copper cables (up to 1m), active multi-mode fiber cable (up
to 100m), and QSFP+ optical transceivers for 40 GbE up to Modular Operating System for
10km. With SummitStack, the X670-G2-48x-4q provides a
flexible stacking solution inside the data center or central
Non-Stop Operation
office to create a virtualized switching infrastructure across Loadable Software Modules
rows of racks. The modular design of the ExtremeXOS OS allows the
adding or upgrading of individual software modules
ExtremeXOS Intelligent L2 and L3 Switching
dynamically without requiring a system reboot, leading to
The X670-G2 supports sophisticated and intelligent higher availability in the network.
Layer 2 switching, as well as Layer 3 IPv4/IPv6 routing
including policy-based switching/routing, Provider Bridges, Preemptive Multitasking and Protected Memory
bidirectional ingress and egress Access Control Lists, and The X670-G2 series switches allow each of many
bandwidth control by 8 Kbps granularity both for ingress applications— such as Open Shortest Path First (OSPF)
and egress. and Spanning Tree Protocol (STP)—to run as separate OS
processes that are protected from each other. This drives
To provide scalable network architectures used mainly for
increased system integrity and inherently protects against
Carrier Ethernet network deployment, the X670-G2 supports
cross-platform DoS attacks.
MPLS LSP-based Layer 3 forwarding and Hierarchical
VPLS (H-VPLS) for transparent LAN services. With H-VPLS,
Process Monitoring and Restart
transparent Layer 3 networks can be extended throughout
the Layer 3 network cloud by using a VPLS tunnel between ExtremeXOS increases network availability using process
the regional transparent LAN services typically built by monitoring and restart. Each independent OS process is
Provider Bridges (IEEE 802.1ad) technology. monitored in real time. If a process becomes unresponsive
or stops running, it can be automatically restarted.
1588 Precision Time Protocol (PTP)*
The X670-G2 offers Boundary Clock (BC), Transparent Rich OAM Suite – CFM, Y.1731, BFD
Clock (TC), and Ordinary Clock (OC) for synchronizing The X670-G2 series switches supports a rich suite of
phase and frequency and allowing the network and protocols to help with Operations, Administration and
the connected devices to be synchronized down to Maintenance. Connectivity Fault Management (CFM)
microseconds of accuracy over Ethernet connection. allows detection, verification, and isolation of connectivity
*1588 PTP supported only in EXOS Release 30.6 and earlier failures in virtual bridged LAN. Y.1731 is largely similar to
CFM but also supports performance management by way
Audio Video Bridging (AVB) of frame delay and frame delay variation measurements.
The X670-G2 series supports IEEE 802.1 Audio Video Bidirectional Forwarding Detection (BFD) is a hello
Bridging to enable reliable, real-time audio/video protocol that provides the rapid detection of failures in the
transmission over Ethernet. AVB technology delivers the forwarding path and helps the separation of control plane
quality of service required for today’s high-definition and connectivity from forwarding plane connectivity.
time-sensitive multimedia streams.
By having multiple control plane protocols like OSPF or Equal Cost Multipath
MPLS rely on BFD to detect forwarding plane connectivity
Equal Cost Multipath (ECMP) routing allows uplinks to be
failures, network operators can benefit from simpler
load balanced for performance and cost savings while
network profiling and planning, and consistent and
also supporting redundant failover. If an uplink fails, traffic
predictable re-convergence times.
is automatically routed to the remaining uplinks and
connectivity is maintained.
MPLS
Link Aggregation (802.3AD)
On the X670-G2 series switches MPLS can be enabled, if
needed, by way of an optional feature pack. MPLS provides Link aggregation allows trunking of up to 32 links on a
the ability to implement traffic engineering and multi- single logical connection, for up to 320 Gbps of redundant
service networks, and improve network resiliency. The bandwidth per logical connection.
MPLS protocol suite provides the ability to deploy services
Multi-Switch LAG (M-LAG)
based on L2VPNS (VPLS/VPWS), BGP-based L3VPNS; LSP
Establishment based on LDP, RSVP-TE, Static provisioning; M-LAG can address bandwidth limitations and improve
Integrated OAM tools like VCCV, BFD and CFM; And MPLS network resiliency, in part by routing network traffic around
Fast Reroute to support rapid local convergence around bottlenecks, reducing the risks of a single point of failure,
network failures. and allowing load balancing across multiple switches.
Hardware Redundancy
High Availability Network
X670-G2 series switches support a dual redundant AC/DC
Protocols power supply to provide high availability. The power supply
Ethernet Automatic Protection Switching (EAPS) can be hot-swapped and replaced should it fail. Summit
X670-G2 also supports standardized N+1 redundant hot-
EAPS allows the IP network to provide the level of resiliency
swappable fan units.
and uptime that users expect from their traditional voice
network. EAPS is more adaptable than Spanning Tree or
Rapid Spanning Tree protocols and can achieve sub-second Robust IP and MAC Security
recovery that delivers consistent failover regardless of the Framework
number of VLANs, network nodes or network topology in
Extreme Networks-recommended configurations. Media Access Control (MAC) Lockdown
MAC security allows the lockdown of a port to a given
EAPS functionality increases network recovery time, which
MAC address and limiting the number of MAC addresses
results in significant reduction in Voice-over IP call drop
on a port. This capability can be used to dedicate ports to
rates and improvement in digital video performance in
specific hosts or devices such as VoIP phones or printers
supported solution configurations.
and avoid abuse of the port—a capability that can be
especially useful in environments such as hotels. In addition,
Spanning Tree/RAPID Spanning Tree Protocols
an aging timer can be configured for the MAC lockdown,
The X670-G2 supports Spanning Tree (802.1D), Per VLAN protecting the network from the effects of attacks using
Spanning Tree (PVST+), Rapid Spanning Tree (802.1w) and (often rapidly) changing MAC addresses.
Multiple Instances of Spanning Tree (802.1s) protocols for
Layer 2 resiliency. IP Security
ExtremeXOS IP security framework helps protect the
Software-Enhances Availability
network infrastructure, network services such as DHCP and
Software-enhanced availability allows users to remain DNS and host computers from spoofing and man-in-the-
connected to the network even if part of the network middle attacks. It also protects the network from statically
infrastructure is down. The X670-G2 continuously checks configured and/or spoofed IP addresses and builds
for problems in the uplink connections using advanced an external trusted database of MAC/IP/port bindings
Layer 3 protocols such as OSPF, VRRP and Extreme providing the traffic’s source from a specific address for
Standby Router Protocol (ESRP, supported in Layer 2 or immediate defense.
Layer 3), and dynamically routes traffic around the problem.
Identity Management Line-Rate Ingress and Egress ACLS
Identity Manager allows network managers to track users ACLs are one of the most powerful components used
who access their network. User identity is captured based in controlling network resource utilization as well as in
on NetLogin authentication, LLDP discovery and Kerberos protecting the network. The X670-G2 series supports up
snooping. ExtremeXOS uses the information to then report to 4,096 ingress ACLs and 1,024 egress ACLs per system
on the MAC, VLAN, computer hostname, and port location
based on Layer 2-, 3- or 4-header information such as the
of the user. Further, Identity Manager can create both roles
MAC or IP source/destination address. ACLs are used for
and policies, and then bind them together to create role-
filtering the traffic, as well as classifying the traffic flow to
based profiles based on organizational structure or other
logical groupings, and apply them across multiple users to control bandwidth, priority, mirroring, and policy-based
allow appropriate access to network resources. In addition, routing/switching.
support for Wide Key ACLs further improves security by
going beyond the typical source/destination and MAC Denial of Service Protection
address as identification criteria access mechanism to The X670-G2 series effectively handles Denial of Service
provide filtering capabilities. (DoS) attacks. If the switch detects an unusually large
number of packets in the CPU input queue, it assembles
Threat Detection and Response ACLs that automatically stop these packets from reaching
the CPU. After a period of time these ACLs are removed,
Clear-Flow Security Rules Engine and reinstalled if the attack continues. ASIC-based LPM
routing eliminates the need for control plane software to
CLEAR-Flow Security Rules Engine provides first-order
learn new flows, allowing more network resilience against
threat detection and mitigation, and mirrors traffic to
DoS attacks.
security appliances for further analysis of suspicious traffic
in the network. Secure and Comprehensive Network Management
sFlow As the network becomes a foundation of the enterprise

application, network management becomes an
The X670-G2 series supports hardware-based sFlow® important piece of the solution. The X670-G2 supports
sampling that provides the ability to sample application- comprehensive network management through Command
level traffic flows on all interfaces simultaneously. Line Interface (CLI), SNMP v1, v2c, v3, and ExtremeXOS
ScreenPlay embedded XML-based Web user interface. With
Port Mirroring a variety of management options and consistency across
To allow threat detection and prevention, the X670-G2 other Extreme Networks modular and stackable switches,
X670-G2 series switches provide ease of management for
supports many-to-one and one-to-many port mirroring.
demanding converged applications.
This allows the mirroring of traffic to an external network
appliance such as an intrusion detection device for trend Supported Protocols and
analysis or for utilization by a network administrator for
diagnostic purposes. Port mirroring can also be enabled
Standards
across switches in a stack. A list of supported protocols and standards is
available on the Extreme Networks website at:
http://www.extremenetworks.com/go/xos
General Specifications Physical Specifications
Performance and Scale X670-G2-48x-4q
X670-G2-48x-4q – 1280Gbps switch bandwidth, 952Mpps Height: 1.73 Inches/4.4 cm
forwarding rate
Width: 17.4 Inches/44.1 cm
X670-G2-72x – 1440Gbps switch bandwidth, 1071Mpps forwarding rate
Depth: 19.2 Inches/48.7 cm
9216 Byte maximum packet size (Jumbo Frame)
Weight: 12.85 lbs/5.83 kg
Store-and-Forward and Cut-Through switching support
X670-G2-72
Less than 600 nanoseconds latency
Height: 1.73 Inches/4.4 cm
128 load sharing trunks, up to 32 members per trunk
4096 VLANS (Port, Protocol, IEEE 802.1Q)
Depth: 19.2 Inches/48.7 cm
4096 ingress and 1024 egress ACL rules per switch
Weight: 15.42 lbs/7.0 kg
Forwarding Tables
X670 Fan Module
Layer 2/MAC Addresses: 288K
Height: 1.65 Inches/4.2 cm
IPv4 Host Addresses: 136K
IPv4 LPM Entries: 16K
Depth: 3.98 inches/10.1 cm
IPv6 Host Addresses: 48K
Weight: 0.357 lbs./0.162 kg
IPv6 LPM Entries: 8K
Operating Specifications
CPU, Memory
Operating Temperature Range: 0° C to 45° C (32° F to 113° F)
1GHz 64-bit CPU
Operating Humidity: 10% to 95% relative humidity, non-condensing
2GB DDR3 ECC SDRAM
Operating Altitude: 0-3,000 meters (9,850 feet)
4GB eMMC Flash Memory
Operational Shock (Half Sine): 30 m/s2 (3 g), 11ms, 60 Shocks
QOS, RATE LIMITING
Operational Random Vibration: 3-500 Hz @ 1.5g rms
4096 ingress bandwidth meters and 1024 egress meters
Storage and Transportation (Packaged)
Ingress and egress bandwidth policing/rate limiting per flow/ACL
Transportation Temperature: -40° C to 70° C (-40° F to 158° F)
8 QoS egress queues/port
Humidity: 10% to 95% RH, non-condensing
Egress bandwidth rate shaping per egress queue and per port
Packaged Shock (Half Sine): 180 m/s2 (18 G), 6ms, 600 shocks
Rate Limiting Granularity: 8 Kbps – 1Mbps
Packaged Sine Vibration: 5-62 Hz @ Velocity 5mm/s, 62-500 Hz @ 0.2G
LED Indicator
Packaged Random Vibration: 5-20 Hz @ 1.0 ASD w/-3dB/oct. from 20-200 Hz
Per port status LED including power status
14 drops min on sides & corners @ 42” (<15 kg box)
System Status LEDs: management, fan and power
Regulatory/Safety
External Ports – X670-G2-48x-4q
North American Safety of ITE
48 ports 10GBASE-X SFP+ (1Gb/10Gb dual speed)
UL 60950-1 2nd Ed, 2011-12-19, Listed Device (U.S.)
4 ports 40GBASE-X QSFP+ (10G/40G dual speed)
CSA 22.2 #60950-1-07 2nd Ed, 2011-12. (Canada)
One RJ-45 RS-232c Serial port (control port)
Complies with FCC 21CFR 1040.10 (U.S. Laser Safety)
One 10/100/1000BASE-T out-of-band management port
CDRH Letter of Approval (U.S. FDA Approval)
External Ports – X670-G2-72x
European Safety of ITE
72 ports 10GBASE-X SFP+ (1Gb/10Gb dual speed)
EN 60950-1:2006 2nd Ed. TUV-R GS
One RJ-45 RS-232c Serial port (control port)
EN 60825-1:2007 (Lasers Safety)
One 10/100/1000BASE-T out-of-band management port
2006/95/EC Low Voltage Directive
Power Supply Support
International Safety of ITE
550W AC PSU – Front-Back and Back-Front airflow options
CB Report & Certificate per IEC 60950-1:2005 2nd Ed., + National Differences
550W DC PSU – Front-Back and Back-Front airflow options
AS/NZS 60950-1 (Australia/New Zealand)
EMI/EMC Standards Power Supply Specifications
North America EMC for ITE 550W AC PSU
FCC CFR 47 part 15 Class A (U.S.A.) Physical Specifications
ICES-003 Class A (Canada) Height: 1.57 inches (4.0 cm)
European EMC Standards Width: 3.07 inches (7.8 cm)
EN 55022:2010 Class A Depth: 13.31 Inches (33.8 cm)
EN 55024:12020 Weight 3.64 lb (1.65 kg)
Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11 Power Specifications
EN 61000-3-2:2006+A2:2009 (Harmonics) Voltage input range 90 to 264 V
EN 61000-3-3: 2008 (Flicker) Nominal input ratings 100 to 240 V, 50 to 60 Hz, 8 A
ETSI EN 300 386 v1.6.1, 2012-09 (EMC Telecommunications) Nominal input current at full loads
7.5 A @ 90 V (low-line)
2004/108/EC EMC Directive
3.7 A @ 230 V (high-line)
International EMC Certifications
Line frequency range 47 to 63 Hz
CISPR 22: 2008, (Ed 6.0) Class A (International Emissions)
Maximum inrush current 15 A
CISPR 24:2010 Class A (International Immunity)
Output 12 V, 45 A max, 540 Watts 3.3 V, 3 A max, 9.9 Watts
IEC/EN 61000-4-2:2009 Electrostatic Discharge, 8kV Contact, 15 kV Air,
Maximum continuous DC output shall not exceed 550 Watts
Criteria A
Power supply input socket IEC 320 C14
IEC/EN 61000-4-3:2006+A1: 2008+A2:2010, Radiated Immunity, 80-
2500MHz, 5-20V/m, Criteria A Power cord input plug IEC 320 C13
EN 55024:1998+A1:2001+A2:2003 Class A (International Immunity) Power supply cord gauge 18 AWG (0.75 mm2) up to 6 feet or 2 meters or
16 AWG (1.0 mm2) over 6 feet
IEC/EN 61000-4-4:2012 Transient Burst, 2 kV, Criteria A
Efficiency 84% typical at full load, high line
IEC/EN 61000-4-5:2006 Surge, 2 kV L-L, 4 kV L-G, Level 3, Criteria A
550W DC PSU
IEC/EN 61000-4-6:2009 Conducted Immunity, 0.15-80 MHz, 10V/m
unmod. RMS, Criteria A Physical Specifications
IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Height: 1.57 inches (4.0 cm)
Criteria C
Width: 3.07 inches (7.8 cm)
Country Specific
Depth: 13.31 Inches (33.8 cm)
VCCI:2003-04, Class A (Japan Emissions)
Weight 2.58 lb (1.17 kg)
ACMA (C-Tick) (Australia emissions)
Power Specifications
BSMI (Taiwan EMC)
Nominal Input -48 to -60 VDC, 24 A
CCC Mark (China)
DC Voltage Input Range -35 to -75 V
KCC Mark EMC (Korea)
Inrush Current 21A peak
Telecom Standards
Minimum wire size 14 AWG (1.5 mm2) copper stranded
EN/ETSI 300 386:2008 (EMC Telecommunications)
DC Output 12 V , 45 A/3.3 V, 3 A
EN/ETSI 300 019 (Environmental for Telecommunications)
DC Output Power (W) 550 W
IEEE 802.3 Media ACCESS Standards
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3ae 10GBASE-X
IEEE 802.3ba 40GBASE-X
Environmental Standards
EN/ETSI 300 019-2-1 v2.1.2 (2000-09) – Class 1.2 Storage
EN/ETSI 300 019-2-2 v2.3.1 (2013-04) – Class 2.3 Transportation
EN/ETSI 300 019-2-3 v2.3.1 (2013-04) – Class 3.1e Operational
EN/ETSI 300 753 (1997-10) – Acoustic Noise
ASTM D3580 Random Vibration Unpackaged 1.5G
EU RoHS 2011/65/EU
EU WEEE 2012/19/EU
China RoHS SJ/T 11363-2006
Power Consumption
Minimum Power Maximum Power
Switch Model Minimum Heat Dissipation Maximum Heat Dissipation
Consumption Consumption
X670-G2-48x-4q 325 BTU/hr 95 W 768 BTU/hr 225 W
X670-G2-72x 325 BTU/hr 95 W 939 BTU/hr 275 W
Switch Model Acoustic Information

Dual 550W AC PS with Front to Back (FB) air flow
Bystander Sound Pressure* Declared Sound Power (LWAd)**
60.2 dB(A), 0°C to 45°C 7.3 bels, 0°C to 45°C
Dual 550W DC PS with Front to Back (FB) air flow
X670-G2-48x-4q Dual 550W AC PS with Back to Front (BF) air flow

70.1 dB(A), 45°C 8.4 bels, 45°C
Dual 550W DC PS with Back to Front (BF) air flow
68.8 dB(A), 45°C 8.1 bels, 45°C
Dual 550W AC PS with Front to Back (FB) air flow
62.5 dB(A), 45°C 7.6 bels, 45°C
Dual 550W DC PS with Front to Back (FB) air flow
Declared Sound Power (LWAd)**
Bystander Sound Pressure*
7.3 bels, 0°C to 35°C
58.5 dB(A), 0°C to 35°C
7.6 bels, 45°C
62.4 dB(A), 45°C
X670-G2-72x
Dual 550W AC PS with Back to Front (BF) air flow
72.6 dB(A), 45°C 8.2 bels, 45°C
Dual 550W DC PS with Back to Front (BF) air flow
73.0 dB(A), 45°C 8.3 bels, 45°C
* Bystander Sound Pressure is presented only for comparison to other products.

**Declared Sound Power is presented in accordance with ISO-7779:2010(E), ISO 9296:2010 per ETSI/EN 300 753:2012-01
Supported System Configurations
Fan modules and power supplies must be ordered with all base models. A full complement of fan modules is required. A
single power supply is required with an optional second power supply for redundancy. AC and DC power supplies can be
mixed in a system. Air flow direction of fan modules and power supplies must match.
Fan Modules AC Power Supplies DC Power Supplies

17111 17112 10925 10927 10926 10928
X670 fan module X670 fan module 550W AC PSU 550W AC PSU 550W DC PSU 550W DC PSU
Base Model
Front-Back Back-Front Front-Back Back-Front Front-Back Back-Front
1 or 2
3 1 or 2
17310 X670-G2-48x- 1 1
4q-Base-Unit 1 or 2
3 1 or 2
1 1
1 or 2
5 1 or 2
17300 X670-G2-72x- 1 1
Base-Unit 1 or 2
5 1 or 2
1 1
Warranty
One Year
For warranty details, visit
http://www.extremenetworks.com/go/warranty.
Ordering Information
Part Number Product Name Product Description
72 10GBASE-X SFP+, ExtremeXOS Advanced Edge License, unpopulated dual PSU power
17300 X670-G2-72x-Base-Unit
slot and 5 unpopulated fan airflow slots
48 10GBASE-X SFP+ and 4 40GBASE-X QSFP+, ExtremeXOS Advanced Edge License,
17310 X670-G2-48x-4q-Base-Unit
unpopulated dual PSU power slot , and 3 unpopulated fan airflow slots
TAA X670-G2-48x-4q 48 10GBASE-X SFP+ and 4 40GBASE-X QSFP+ ExtremeXOS
17310T X670-G2-48x-4q-FB-AC-TAA Advanced Edge License, 2 550W AC Power Supplies with Front-to-Back airflow, and 3
Front-to-Back airflow fan modules
17111 X670 fan module FB Fan module for X670 series switches, Front-to-Back airflow
17112 X670 fan module BF Fan module for X670 series switches, Back-to-Front airflow
10925 550W AC PSU FB 550W AC Power Supply module for switches, Front-to-Back airflow
10926 550W DC PSU FB 550W DC Power Supply module for switches, Front-to-Back airflow
10927 550W AC PSU BF 550W AC Power Supply module for switches, Back-to-Front airflow
10928 550W DC PSU BF 550W DC Power Supply module for switches, Back-to-Front airflow
LRM/MACsec Adapter, includes two host cables for host switch connection, and USB cable
10965 LRM/MACsec Adapter
for optional power connection. Requires MACsec license on host switch.
10966 5-Unit Rack Mount Kit Optional rack mount bracket for LRM/MACsec Adapter. Holds five units in 1RU
17131 X670 Series Core License X670 Series Core License
17133 X670 MPLS Feature Pck X670 MPLS Feature Pack
17134 X670 OpenFlow FeaturePack ExtremeXOS SDN - OpenFlow Feature Pack for X670 series switches
17135 X670 AVB ExtremeXOS Audio Video Bridging Feature Pack for X670 series switches
ExtremeXOS Network Timing Feature Pack for X670-G2 - enables 1588v2 PTP*
17136 X670-G2 Timing 1588 PTP*
(Precision Time Protocol)
11011 Direct Attach Feature Pack Direct Attach Feature Pack
MACsec Feature Pack for X670-G2 series switches. Enables MACsec when used with LRM/
17137 X670-G2 MACsec Feature Pack
MACsec Adapter (10965)
10319 QSFP+ SR4 module 40 Gigabit Ethernet QSFP+ SR4 optical module, MPO connector, 100m MMF link length
MPO to 4xLC OM3 MMF patch cord, 5m
9380014-5M MPO to 4xLC OM3 MMF
(for use with 10319 QSFP+ SR 10Gb breakout)
10329 40Gb Bidi MMF QSFP+ 40Gb Bidirectional MMF, 100m OM3, QSFP+, duplex LC
10320 QSFP+ LR4 module 40 Gigabit Ethernet QSFP+ LR4 optical module, LC connectors, 10km SMF link length
10326 QSFP+ PSM Optical Module 40 Gigabit QSFP+ Parallel Single Mode (PSM) LR4, MPO connector, SMF 10 km
MPO to 4xLC SMF patch cord, 10m
10327 MPO to 4xLC SMF
(for use with 10326 QSFP + PSM LR4)
10334 40Gb LM4 QSFP+ 40Gb LM4, 140m OM3 MMF, 1Km SMF, QSFP+, LC
10335 40Gb ER4 QSFP+ 40Gb ER4, 40Km SMF, QSFP+, LC
10311 QSFP+ passive copper cable, 0.5M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 0.5m length.
10312 QSFP+ passive copper cable, 1.0M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 1m length.
10313 1
QSFP+ passive copper cable, 3.0M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 3m length.
10323 1 QSFP+ passive copper cable, 5.0M 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 5m length.
10336 3m QSFP+ Active Optical Cable 40 Gigabit QSFP+ active optical cable, 3m
10337 5m QSFP+ Active Optical Cable 40 Gigabit QSFP+ active optical cable, 5m
10315 10m QSFP+ Active Optical Cable 40 Gigabit Ethernet QSFP+ active optical cable assembly, 10m length.
10202 QSFP+ - 4xSFP+ fan-out cbl, 1m QSFP+ to 4 x SFP+ fan-out copper cable, 1m
QSFP+ to SFP+ adapter, supports a single SFP+ 10 Gb Ethernet transceiver in a QSFP+ port
QSFP-SFPP-ADPT QSFP+ to SFP+ Adapter
(optical SFP+ tranceivers only, 10303 LRM not supported)
*1588 PTP supported only in EXOS Release 30.6 and earlier
Ordering Information (cont.)
Part Number Product Name Product Description
10301 SR SFP+ module 10GBASE-SR SFP+, 850nm, LC Connector, transmission length of up to 300m on MMF
10302 LR SFP+ module 10GBASE-LR SFP+, 1310nm, LC Connector, transmission length of up to 10km on SMF
10309 ER SFP+ module 10GBASE-ER SFP+, 1550nm, LC Connector, transmission length of up to 40km on SMF
10310 ZR SFP+ module 10GBASE-ZR SFP+, 1550nm, LC connector, transmission length up to 80km on SMF
10325 Tunable DWDM SFP+ 10 Gigabit Ethernet SFP+ Tunable DWDM module, SMF 80km, LC
10Gb, Single Fiber SM, Bidirectional, Downstream, 10Km, Simplex LC SFP+ (must be paired
10GB-BX10-D 10 GB, SINGLE FIBER SM, -D 10 KM
with 10GB-BX10-U)
10Gb, Single Fiber SM, Bidirectional, Upstream, 10Km, Simplex LC SFP+ (must be paired with
10GB-BX10-U 10 GB, SINGLE FIBER SM, -U 10 KM
10GB-BX10-D)
10304 SFP+ Cable Assembly 1M 10GBASE-CR SFP+ pre-terminated twin-ax copper cable with link lengths of 1m
10051H 1000BASE-SX SFP, Hi 1000BASE-SX SFP, MMF 220 & 550 meters, LC connector, Industrial Temp
10052H 1000BASE-LX SFP, Hi 1000BASE-LX SFP, MMF 220 & 550 meters, SMF 10km, LC connector, Industrial Temp
10053H 1000BASE-ZX SFP, Hi 1000BASE-ZX SFP, SMF 70km, LC connector, Industrial Temp
10/100/1000BASE-T SFP module, CAT5 cable 100m link, RJ45-connector for Giga Bit
10070H2 10/100/1000BASE-T SFP, Hi
Ethernet SFP Port, Industrial Temp
1 - Not supported for SummitStack links

2 - Only 1Gb speed supported with 10070H when used with X670-G2
Note: See the ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices document for a full list of supported devices and ExtremeXOS
release recommendations.
Power Cords
In support of the Extreme Networks Green Initiatives, power cords can be ordered seperately but need to be specified at the time order. Please refer to
www.extremenetworks.com/product/powercords/for details on power cord availability for this product.
http://www.extremenetworks.com/contact
©2022 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc.
in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks
please see http://www.extremenetworks.com/company/legal/trademarks. Specifications and product availability are subject to change without notice. 8882-0422-27

x670 g2 Data Sheet

Uploaded by

Copyright:

Available Formats

x670 g2 Data Sheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

x670 g2 Data Sheet

Uploaded by

Copyright:

Available Formats

Data Sheet

The X670-G2-48x-4q supports four QSFP+ ports of 40 GbE. Each 40

The X670-G2-72x model supports 72 ports of native 1Gb/10Gb SFP+ ports

SummitStack-V—Flexible Stacking Over 10 Gigabit Ethernet

sFlow As the network becomes a foundation of the enterprise

Switch Model Acoustic Information

X670-G2-48x-4q Dual 550W AC PS with Back to Front (BF) air flow

* Bystander Sound Pressure is presented only for comparison to other products.

Fan Modules AC Power Supplies DC Power Supplies

*1588 PTP supported only in EXOS Release 30.6 and earlier

1 - Not supported for SummitStack links

You might also like