Instruction - VCC 346367 1
Instruction - VCC 346367 1
Instruction - VCC 346367 1
IMG-233441
Equipment
A0000162 IMG-245345
Page 1 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
IMG-233442
Page 2 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
IMG-213320
Page 3 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
INTRODUCTION
1
Steps 1-7 apply to cars with automatic transmission
Turn the locking sleeve on the gear selector lever knob a quarter
turn clockwise.
IMG-233443
IMG-233444
Page 4 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
Pry out the 2 x catches at the front and rear edge using a small
screwdriver.
IMG-233445
Press in the lock button (1) and pull the gear shift knob straight
up (2).
IMG-282123
Page 5 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
Install the new gear shift knob (A) by first pressing in the lock
button (1). Then push it down (2) until the catches engage.
IMG-282124
IMG-233449
Page 6 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
Turn the locking sleeve on the gear selector lever knob a quarter
turn counter-clockwise.
Warning!
IMG-233450
8
Steps 8-12 apply to cars with manual transmissions
Grasp the locking ring that is located under the gear selector
lever knob and before the boot. Work loose slightly and pull the
locking sleeve and boot down. Take care so that the boot does
not jump out of the locking ring.
IMG-233451
Page 7 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
IMG-233452
10
IMG-233453
Page 8 / 9
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
11
IMG-233455
12
Move the boot and locking ring up so that the locking ring hooks
into the gear selector lever knob.
IMG-233458
Page 9 / 9