5 RDSSPart ISection 4price Bid Schedule2ETC

Schedule-3 (1/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER REVAMPED REFORMS-BASED AND RESULTS-LINKED,
(Schedule of rates and prices)
Bidder's Name & Address:
Installation / Erection Charges :
All prices in Indian Rupees
A Erection, testing and Commissioning of New 33 KV lines:
Unit Quantity Unit price GST payable on GST payable on the Total Price per line
the price quoted if price quoted if item
Description of Related Services (excludes inland Contract is Contract is
Service
transportation and other services required in India to awarded (%) awarded (Amount)
No.
convey the goods to their final destination)
1 2 3 4 5 6 7 8
1.00 Survey, route alignment & pole spotting, preparation of Km

survey report and uploading in the web portal after
approval of Project Manager
2.00 Excavation of pole pit (of depth 1/6th of pole length) in

normal soil as per scope of work, approved drawings and
specifications:
2.01 9.1 meter long /280 KG PCC Poles (PCC Pole as per state practice) No
2.02 13 m long H-Beam 152x152 mm 37.1 kg/mtr No
2.03 11 M long steel Tubular poles with welded steel base plate of No
Designation 540 SP 52 (IS 2713, Pt I, II, III 1980)

soft rock where blasting is not required as per scope of
work, approved drawings and specifications:

hard rock where blasting is required as per scope of work,
approved drawings and specifications:
Erection, testing & commissioning of pre-fabricated steel

items like V cross arm, top clamp, DC cross arm, bracket,
clamps, cross bracings, bracings, strain plate, guarding
channels, back clamp, etc made of MS Channels, MS angle,
5.00 MS flats of given sizes for over head structures and MS MT
nuts, bolts & washers including painting by red oxide &
aluminium paint as per technical specification, approved
drawings and scope of work.
6.00 Excavation of stay pit in following type of soils, as per

scope of work, approved drawings and specifications:
6.01 Normal soil No
6.02 Soft rock soil where blasting is not required No
6.03 Hard rock soil where blasting is required No

7.00 Erection of complete stay set with GI stay wire (7x4.00 mm Set
dia), binding of stay wire, by providing Guy stay insulator
(2 Nos.) and 0.3 cmt concreting 1 part cement, 3 part sand,
6 part 40 mm size stone aggregate chips (1:3:6) as per
technical specifications, approved drawings and scope of
works.
8.00 Erection, testing and commissioning of 33 kV
polymer/porcelain insulator including their hardware
fittings as per technical specification, approved drawings
and scope of work.
8.01 33 kV Pin insulator with GI pin Set
8.02 33 kV Disc insulator with strain hardware (set of 3, 11 KV disc Set

insulators)
9.00 Erection of following types of poles for 33 KV overhead line
by providing and installing danger plate, anti-climbing
devices (barbed wire), earthing material (coil and 8SWG GI
wire), red oxide & aluminium paint, pole numbering
including cement concrete foundation using cement
concreting foundation 1 part cement, 3 part sand, 6 part 40
mm size stone aggregate chips (1:3:6) etc as per scope of
9.01 9.1 meter long /280 KG PCC Poles (PCC Pole as per state practice) - No
cement concreting (0.5 cmt)
9.02 13 m long H-Beam 152x152 mm 37.1 kg/mtr - cement concreting No
(0.65 cmt)
Designation 540 SP 52 (IS 2713, Pt I, II, III 1980) - cement
concreting (0.65 cmt)
10.00 Paying out, tensioning, binding of conductor and tightening

of stays and stringing, testing and commissioning of ACSR
Conductor of following sizes including jointing sleeves,
helical formed fittings, jumpering and by providing &
erecting PG Clamps etc as required as per approved
drawings, scope of work and technical specifications
10.01 6/4.09 + 1/4.09 mm (80 mm² Al. Area) - Racoon km
10.02 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog km
10.03 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther km
Earthing arrangement as per technical specificatons,

11.00
approved drawings and scope of work.
Excavation, erection, testing & commissioning of 40 mm dia., 3000 Set
mm long GI pipe earth electrode with test link, RCC pit, RCC cover
11.01
plates on GI frame, bentonite powder and other accessories
complete
Excavation, erection, testing & commissioning of Spike Earthing Set
11.02
20mm solid Rod
Excavation, erection, testing & commissioning of Chemical rod Set
earthing including electrode, chemical, with 2000mm long, 50 mm
11.03
diameter GI pipe, GI Strip of 24x3mm miminum in hard rock
locations only.
11.04 Erection of 8 SWG GI Coil 115 tonnes (1.85 kg) No
Erection of 8 SWG GI wire for earthing and guarding by providing MT

11.05
GI nut, bolts & washers, turn buckle etc
Erection of 6 SWG GI wire for earthing and guarding by providing MT
11.06
GI nut, bolts & washers, turn buckle etc
12.00 Erection, Testing and Commissioning of 33 kV AB Switch Set

along with Support Insulators, Base Channel, down Pipe,
Arcing Horns etc. complete as per technical specifications,
scope of works and approved drawings
13.00 Erection of 33 KV LINE FOR UNDER GROUND RAILWAY Set

CROSSING BY 2 Nos (INCLUDING ONE SPARE) 3Cx300
Sqmm (0.3 km) XLPE Armoured Cable , USING 150MM DIA
GI PIPES, OUTDOOR HEAT SHRINKABLE CABLE JOINTING
KITS, LUGS, 4 Nos GI 3-METERS LONG EARTHING, 6 SWG
GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS,
JUMPERING WITH 33 KV ARIAL BUNCHED CABLES 200
sqmm dia (10 mtr), 33 KV STATION TYPE LIGHTENING
ARRESTORS (6 NOS.), ETC AS REQUIRED AS PER
TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF
THE WORK.
Total
% discount, if any: __________________

Schedule-3 (2/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER REVAMPED
REFORMS-BASED AND RESULTS-LINKED,
Installation / Erection Charges : All prices in Indian Rupees
B 33/11 KV Grid Substation works

Service Description of Related Services (excludes inland Unit Quantity Unit price GST payable GST payable Total Price
No. transportation and other services required in India to on the price on the price per line
convey the goods to their final destination) quoted if quoted if item
Contract is Contract is
awarded (%) awarded
(Amount)
1 2 3 4 5 6 7 8
B (I) 33/11 KV Grid Substation works - Common for fully
outdoor / partly outdoor substation
B (Ia) Civil works: Design, supply of all material, T&P, labour etc
for the following civil works complete
Soil Investigation & Contour Survey of Substation area as
1.00 per Technical Specification, approved Drawing & Scope of PER S/S
works
2.00 Earth Filling & Site Levelling

2.01 Earth work in PSS site provided by employer for pits free from
logs, stumps, roots, rubbish or any other ingredients likely to
deteriorate or affect the stability of the (0.5 meter filling
considered size 40ftx40ft) site surface including breaking the clods
maximum to 60 mm. cube, placing the earth in layers not
CMT
exceeding 225 mm in loose thickness, rough dressing including
cost of cutting and removing shrubs, roots falling in borrow area all
complete as per approved design, as per Technical Specification,
approved Drawing & Scope of works
Gravel filling in switchyard area excluding road and

3.00 footpath as per Technical Specification, approved Drawing Sq. m
& Scope of works.
Design, engineering and construction of foundation for

following power transformer considering original
equipment manufacturer recommendations including
4.00 excavation of pit, shuttering, reinforcement, cement
concreting including providing and erecting guiding rail,
wheel stopper etc as per Technical Specification, approved
Drawing & Scope of works:
4.01 1.60 MVA without tap changer CMT
4.03 5.00 MVA with off load tap changer CMT

Design, engineering and construction of foundation for
following outdoor mounted Vacuume Circuit Breaker
considering original equipment manufacturer
recommendation including excavation of pit, shuttering
5.00 and by providing reinforcement, cement concreting,
painting etc as per Technical Specification, approved
Drawing & Scope of works. Works also includes providing
working platform for operation of breakers and painting.
5.01 33 KV VCB CMT

5.02 11 KV VCB CMT
Providing and Construction of outdoor gantry structure
foundation and erection of gantry structure (H-
Beam/lattice structure) including top muffing and its
painting by excavation of pit and by providing shuttering,
6.00 cement concreting (0.65 cmt per structure) etc as per CMT
Technical Specification, approved Drawing & Scope of
works
Providing and Construction of Boundary Wall made of

reinforced cement concrete foundation (Beam, column,
footing), angle supports, brick works, plastering including
Barbed Wire Fencing on MS angle and one MS Gate per
Substation, including Supply, Fabrication, Fixing including
7.00 red oxide and aluminium painting all complete as per R/Mtr
works
Design, engineering and construction of Control Room

Building of size 10mx12m complete with foundation,
flooring, trenching, plastering, brick work, roof, painting,
doors & windows, surface tile as per requirement,
recessed water supply piping (GI medium class pipes and
fittings), sanitary fittings, toilet, water supply
8.00 Sqm
arrangements, sign board including Labour, Cement,
Reinforcement Steel, Framework, Excavation etc, all
complete as per Technical Specification, approved Drawing
& Scope of works
Design, engineering and construction of cement concrete

Cable Trench of 0.5 Mtr wide, required depth, precast RCC
Trench Cover, Water slop, cable supporting angles
9.00 including Labour, Reinforcement Steel, MS Angles, Flats, R/Mtr
Steel Frame Work, Excavation etc, all complete as per
works.
Design, engineering and construction of Drainage System
made of brick work in the Substation premises including
Excavation etc, all complete as per design, Technical
10.00 R/Mtr
Specification, approved Drawing & Scope of works
Design, engineering and construction of approach road,

footpath including bitumen carpeting and excavation,
11.00 compaction etc. all complete as per Technical
11.01 width of approach road 3.75 m R/Mtr

11.02 width of footpath 1.5 m R/Mtr
Drilling of tube well bore and installation of submersible

pump, submersible motor, cabling and control panel of
12.00 suitable capacity as per Technical Specification, approved SET
Drawing & Scope of works.
Earth Filling & Site Levelling

13.00
13.01 Earth work in Substation site with ordinary soil obtained from CMT
borrow pits free from logs, stumps, roots, rubbish or any other
ingredients likely to deteriorate or affect the stability of the (0.5
meter filling considered size 40*40) site surface including breaking
the clods maximum to 60 mm. cube, placing the earth in layers not
exceeding 225 mm in loose thickness, rough dressing including
cost of cutting and removing shrubs, roots falling in borrow area all
complete as per approved design, as per detailed Technical
Specification, approved Drawing & Scope of works.
Gravel filling in switchyard area excluding road and Sq. m

14.00 footpath as per detailed Technical Specification, approved
Construction of Boundary Wall including Barbed Wire Mtr
Fencing on MS angle over the Boundary Wall and Gate per
15.00 Substation, including Supply, Fabrication, Fixing, Painting
all complete as per detailed Technical Specification,
approved Drawing & Scope of works.
Design, engineering and construction of Control Room Sqm
Building including indoor trench comprising of battery
room, panel room, administration room, toilet etc as
required of overall size 10mX12m, single story including
16.00 supply of construction materials, Labour, Cement,
Reinforcement Steel, Frame Work, Excavation etc, all
complete as per detailed Technical Specification, approved
Design, engineering and construction of Cable Trench of Mtr
0.5 Mtr wide, required depth, precast RCC Trench Cover,
Water stops, Brick Work wherever required including
17.00 supply of T&P, Labour, Cement, Reinforcement Steel, Steel
Angles, Flats, Form Work, Excavation etc, all complete as
per detailed Technical Specification, approved Drawing &
Scope of works.
Design, engineering and construction of Drainage System Mtr

in the Substation premises including supply of civil
construction materials, Labour, Cement, brick, Form Work,
18.00
Excavation etc, all complete as per detailed Technical
Design, engineering and construction of approach road,

footpath including supply of civil construction materials,
labour, brick, stone, earth, bitumen and excavation,
19.00 compaction etc. all complete as per detailed Technical
19.01 width of approach road 3.75 m Mtr
19.02 width of footpath 1.5 m Mtr
B (Ib) Substation Electrical works
Erection, filtration, testing and commissioning of 33/11

kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor Conventional
type Power Transformer along with transformer oil,
Buchholtz relay, breather, OTI & WTI, Marshalling Box,
Conservator tank, oil level indicator, valves by providing 2
sets of 50x8 mm GS Neutral Earthing strips with braided
1.00
conductor on bushing end supported with insulators, OTI
& WTI Indicators, Vent explosion plug, control wiring /
cabling, cable supporting tray on the body, transformer
wheels, bushing etc as per Technical Specification,
1.01 1.60 MVA without tap changer No
1.03 5.00 MVA with off load tap changer No

Station Transformer Substation
2.00
Erection, testing and commissioning of 100 KVA, 11/0.4 kV, 3 ph,
50 Hz, ONAN, aluminium would outdoor type Distribution
2.01 Transformer (Station Transformer) as per Technical Specification, Set
Providing and Erection, testing & commissioning of ACSR Rabbit Km

Conductor for jumpering including PG Clamps, bi-metallic
2.02 connectors, hardware on station transformer substation etc as per
Technical Specification, approved Drawing & Scope of works
Erection, testing and Commissioning of 12 KV, 200 A, 3-pole AB Set

2.03 Switch for station Transformer Substation as per Technical
Erection, testing and commissioning of 9 KV,10 KA Distribution

Class Lightening Arrester for station transformer substation as per
2.04 technical specification, approved drawings and scope of work. No
Erection, testing and commissioning of 11 kV, 3-ph, Drop Out fuse

units (set of 3 units) along with Support Insulators, Base Channel,
2.05 fuse barrel etc. complete as per technical specifications, scope of Set
works and approved drawings
Fabrication and Erection of Gantry structures using H-
Beam, lattice structure (galvanised including hardware),
MS channel, MS angle and MS flat of various sizes
3.00 including MS nuts & bolts, by providing red oxide painting MT
and aluminium painting etc as required as per Technical
Erection, testing and commissioning of 36kV, 630A, 25kA

for 3 sec, 3-ph double break center rotating type (DBCR),
Gang Operated, isolator along with Support Insulators,
Operating Mechanism, Base Channel down Pipe and all
4.00 Set
required accessories complete as per approved drawings,
technical specifications and scope of the work,
Erection, testing and Commissioning of 30kV, 10kA, 1-ph

Station Class Lightening Arresters, jumpering from bus
5.00 bar, hardware etc as required, as per approved drawings, No

Station Class Lightening Arrester, jumpering from bus bar,
6.00 hardware, etc as required as per approved drawings, No
technical specifications and scope of the work.
Erection, testing and Commissioning of 36 kV, 1-Phase,

33kV/110 volt, Single core outdoor type Potential
transformer along with junction box (1 no junction box for
7.00 3 no of 1-phase PTs) including control and power supply Set
cabling and required accessories etc., complete as per as
per approved drawings, technical specifications and scope
of the work,
Erection, wiring, testing and commissioning of 12 kV, 1250
A, 25kA, 3-ph, Outdoor type Vacuum Circuit breaker
along with 12 kV, 1-Phase, 300-150/5-5 A and 300-150/5-
5, outdoor type Current Transformer along with junction
box (1 no junction box for 3 no of 1-phase CTs), Jumpers,
8.00 supporting structures, permanent maintenance platform, Set
marshalling box, control cabling between VCB and indoor
control panel and required accessories complete as per
approved drawings, technical specifications and scope of
the work,
Design, Engineering, providing foundation channel ISMC

75, erection, welding with MS angle of trench, wiring,
control and power supply cabling in trench between field
equipment and panels, testing and commissioning of 11kV
indoor type control and relay panel consisting of A-meter,
9.00
volt-meter, Relay & accessories complete as per
specifications for transformer breaker as per approved
drawings, technical specifications and scope of the work,
9.01 Transformer Protection Breaker Panel No

9.02 Feeder Protection Breaker Panel No
Installation, initial charging, cabling, interconnection
cabling, testing and commissioning of 24V, 80 AH Ni-Cd or
Pb Acid battery (or as per state practice) on battery stand
made of teak wood duly painted with anti rusting paint,
battery insulators, inter-battery wiring using 30 sqmm
10.00 Set
copper single core multi strand cable, terminal connectors,
& all other accessories and connectors as per as per
the work,
Design, engineering, construction of foundation,

Installation, interconnection cabling, testing and
commissioning of 24V, 40 Amp. Float-Cum-Boost Battery
11.00 Charger (or as per state practice) with full wave No
rectification for 230 V, 1 phase, 50 Hz AC Input Supply as
per approved drawings, technical specifications and scope
of the work
Erection, testing & commissioning of 415 V, ACDB along

with three phase-neutral voltmeter, three phase ammeter
and Selector switches, 200 Amps TPN switch fuse unit as
incomer, 32 Amps TPN switches as outgoing feeders suited
for number of control panels, nos of VCB kiosk panel,
12.00 No
having 20% spare outgoing feeders, by providing MS
angle 50x50x6 mm structure, cement concrete foundation
etc as per technical specifications, approved drawings and
scope of works.
24 Volts (or voltage as per state practices) Direct Curent

Distribution Board (DCDB) Indoor floor mounted
comprising of 2P/100A DC Switch Fuse Unit as incommer
and 2P/40A switch fuse units for each individual outgoing
circuit of indoor control panels, indoor/outdoor VCB
13.00 panels, control room emergency DC lighting including 20% Set
as spare, by providing MS angle 50x50x6 mm structure,
cement concrete foundation etc as per technical
specifications, approved drawings and scope of works.
Excavation, laying, welding, refilling, earthing & grounding

conductor as per Approved Electrical Layout for each sub-
station and erection of riser up to various
14.00 equipment/gantry structures as per Technical
14.01 75 x 8 mm MS flat for ground mat

MT
14.02 50 x 6 mm Galvanized GS flat (risers)
MT
14.03 25 x 3 mm Galvanized GI flat (risers)
MT
14.04 25 mm dia GI Rod 3 m long for earth mat
MT
Excavation, erection, testing and commissioning of 40 mm
dia., 3000 mm long GI pipe earth electrode by providing
test link, RCC pit, RCC cover, placed on GI frame,
bentonite powder and other accessories complete as per
15.00 approved drawings, technical specifications and scope of Set
the work for power transformer neutral, station
transformer neutral, lightening arresters direct earthing.
Erection, testing and commissioning of Bus Conductor
(Panther Conductor) and droppers (Dog Conductor)
including jumpers to various equipment using 11 KV and
16.00 33 KV insulators, GI Pin, GI Hardware fittings, PG Clamps, km
T-connectors etc as required as per approved drawings,
specifications and scope of the work.
Erection, testing and commissioning of External
electrification works of substation including area lighting
by 4 No, 12m high steel tubular lighting masts, 2x250
watts LED flood light fittings on each mast, Junction boxes
of the fittings, area lighting power distribution board, 2
17.00 nos. 3 Phase 63 Amp power receptacles, tube well power Set
supply, etc as required by laying power cables in
underground/above ground/trenches, construction of
foundations for receptacles, distribution boards etc as
required as per approved drawings, specifications and
scope of work.
Supply, Erection, testing and commissioning of Fire

Fighting Equipment comprises of Dry Chemical Powder
Type (6 Kg) for control room; CO2 Type of 4.5Kg Capacity
for Control Room and CO2 Type Trolley Mounted of 22.5 Kg
18.00 Capacity for Switch Yard and 3 Nos. fire buckets of 25 ltr SET
capacity filled with sand and mounted on 50x50x6 MS
stand duly painted as per Technical Specification,
approved Drawing & Scope of works.
Erection, testing and commissioning of Internal

electrification work in Substation Control room as per
approved drawings, specifications and scope of work by
installing, erection, testing and commissioning of fans,
19.00 exhaust fans, fluorescent lighting, LED lamps, L&F, power Set
points, wiring materials, Distribution Boards, Sub-
distribution boards etc. as per Technical Specification,
Laying, testing and commissioning of Power Cables in

cable trench/pipes/underground/overhead laying
including their termination at indoor/outdoor terminals
20.00 including supply of glands, lugs, cable ties, tagging etc as
required as per Technical Specification, approved Drawing
& Scope of works
20.01 3.5 Core 150 Sq. mm armored, stranded aluminium conductor,

PVC insulated and PVC sheathed cable MTR
20.02 3.5 Core 70 Sq. mm armored, stranded aluminium conductor, PVC

insulated and PVC sheathed cable MTR
20.03 3.5 Core 35 Sq. mm armored, stranded aluminium conductor, PVC

20.04 2 Core 16 Sq. mm armored, stranded aluminium conductor, PVC

Laying, testing and commissioning of Control Cables in

21.00
including supply of glands, lugs, cable ties, tagging etc as
required as per Technical Specification, approved Drawing
& Scope of works
21.01 2 Core 2.5 sqmm armored, stranded copper conductor, PVC


11 KV CAPACITOR BANK INCLUDING MOUNTING STEEL
GALVANISED STRUCTURE AND ACCESSORIES AS
B (II) REQUIRED AS PER DETAILED TECHNICAL
SPECIFICATIONS, DRAWING AND SCOPE OF WORKS IN
FOLLOWING ARRANGEMENTS:
ERECTION, TESTING & COMMISSIONING OF CAPACITOR BANK

1.00 600 KVAR - FIXED TYPE SUBSTATION MOUNTED WITH Set
CAPACITOR SWITCH AND ASSOCIATED ACCESSORIES

1200 KVAR - AUTO TYPE SUBSTATION MOUNTED WITH ALL
ASSOCIATED EQUIPMENT LIKE 11 KV VCB, C&R PANEL, CTs, 11
KV 200A ISOLATORS WITH EARTH SWITCH, RVT, 11 KV STATION
2.00 CLASS LA, RED OXIDE / ALUMINIUM PAINTING, 2.5 SQ.MM. PVC Set
ARMOURED STRANDED COPPER CONTROL CABLES, PROTECTION
CIRCUIT AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS &
BOLTS ETC AS REQUIRED AS PER APPROVED TECHNICAL
SPECIFICATIONS, DRAWING AND SCOPE OF WORKS

1500 KVAR - AUTO TYPE SUBSTATION MOUNTED WITH ALL
ASSOCIATED EQUIPMENT LIKE 11 KV VCB, C&R PANEL, CTs, 11
KV 200A ISOLATORS WITH EARTH SWITCH, RVT, 11 KV STATION
3.00 CLASS LA, RED OXIDE / ALUMINIUM PAINTING, 2.5 SQ.MM. PVC Set
ARMOURED STRANDED COPPER CONTROL CABLES,PROTECTION
CIRCUIT AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS &
BOLTS ETC AS REQUIRED AS PER APPROVED TECHNICAL
B (IV) 33/11 KV Grid Substation works: Fully outdoor type
Erection, testing and commissioning of 36kV, 1250A, 25kA

for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker
along with 36kV, 1-Phase, 200-100/1-1 Amps outdoor
type Current Transformer along with junction box (1 no
junction box for 3 no of 1-phase CTs)], Jumpers, earthing,
1.00 supporting structures, maintenance platform, marshalling SET
box, control cabling between VCB and indoor control panel
and required accessories complete as per Technical
Design, Engineering providing and installation of ISMC 75

channel on top of indoor trench, erection of panels on
ISMC 75 channels, welding, testing and commissioning of
33kV indoor Control & Relay panel along with E/F & O/C
relays, control and power supply cabling in trench
2.00 between field equipment and panels, Mimic Diagram,
Voltmeter, Ammeter, Annunciation Windows with
annunciation relays and other components etc as per
the work for controlling:
2.01 33 kV feeder VCB with Static Tri-Vector Energy Meter etc

No
2.02 33 kV Power transformer VCB with Static Tri-Vector Energy Meter,

No
B (V) 33/11 KV Grid Substation works: Partly outdoor type
Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor

type Vacuum Circuit breaker and indoor control panel by
providing ISMC 100 channel, levelling, alignment and
welding on existing cable trench in control room. Erection,
testing & commissioning of indoor VCB panel including 3
Nos indoor type Current Transformer, Potential
1.00
Transformer, indoor mounting type control panel, by
providing control cabling between VCB and indoor control
panel and required accessories, bi-metallic clamps, A-
meter, volt-meter, Relay & accessories complete for
following arrangements and protection as per approved
drawings, technical specifications and scope of the work. :
1.01 Transformer Protection Set
1.02 Feeder Protection Set
1.03 Bus coupler Set

Laying, erection, termination using indoor & outdoor
termination kit, 11KV XLPE, Power armored cables of
2.00 following sizes as per technical specifications, approved
drawings and scope of works. :
2.01 3Cx300 sqmm km
2.02 3Cx240 sqmm km
2.03 3Cx35 sqmm km
Total
% discount, if any: __________________

Schedule-3 (3/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER REVAMPED
REFORMS-BASED AND RESULTS-LINKED,

C Erection, testing and Commissioning of New 11 KV lines:
Service No. Description of Related Services (excludes inland Unit Quantity Unit price GST GST Total Price
transportation and other services required in India to payable on payable on per line item
convey the goods to their final destination) the price the price
quoted if quoted if
awarded awarded
(%) (Amount)
2 3 4 5 6 7 8
1
Survey, route alignment & pole spotting, preparation of Km

survey report and uploading in the web portal after
1.00 approval of Project Manager
Excavation of pole pit (of depth 1/6th of pole length) in

normal soil as per scope of work, approved drawings
2.00
and specifications:
8 m/140 kgs PCC Poles - (PCC Pole as per state practice) No

2.01
13 m long H-Beam 152x152 mm, 37.1 kg/mtr No

2.02
2.03
11 M long Steel Tubular poles with welded steel base plate of No
2.04 Designation 540 SP 52 (IS 2713, Pt I, II, III 1980)


soft rock where blasting is not required as per scope of
3.00 work, approved drawings and specifications:

3.01

3.02
3.03


4.00 hard rock where blasting is required as per scope of
4.01

4.02

4.03

4.04
9 M long Steel Tubular poles with welded steel base plate of

4.05
Erection of following types of poles for 11 KV overhead

line by providing and installing danger plate, anti-
climbing devices (barbed wire), earthing material (coil
and 8SWG GI wire), red oxide & aluminium paint, pole
numbering including cement concrete foundation or
refilling by bolders using cement concreting foundation
5.00 1 part cement, 3 part sand, 6 part 40 mm size stone
aggregate chips (1:3:6) or/and 200 mm average size
bolders mixed with excavated earth etc as per scope of
8 m/140 Kgs PCC Poles with RCC Base plate/pad including No

refilling by brick ballast/ stone bolder as required - (state
5.01 practices of PCC pole and base plate/stone to be used)
8 m/140 Kgs PCC Poles with RCC Base plate/pad - Cement No

5.02 concreting 0.5 cmt
13 m long H-Beam 152x152 mm, 37.1 kg/mtr - Cement No

5.05 Designation 540 SP 52 (IS 2713, Pt I, II, III 1980) - Cement
concreting 0.65 cmt
concreting 0.5 cmt
Erection, testing & commissioning of pre-fabricated MT

steel items like V cross arm, top clamp, DC cross arm,
bracket, clamps, cross bracings, bracings, strain plate,
guarding channels, back clamp, etc made of MS
Channels, MS angle, MS flats of given sizes for over
6.00
head structures and MS nuts, bolts & washers including
painting by red oxide & aluminium paint as per technical
specification, approved drawings and scope of work.
7.00
Set
Excavation, erection, testing & commissioning of 40 mm dia.,
3000 mm long GI pipe earth electrode with test link, RCC pit,
7.01
RCC cover plates on GI frame, Charcoal, Salt and other
accessories complete

7.02
20mm solid Rod
Set
Excavation, erection, testing & commissioning of Chemical rod
earthing including electrode, chemical, with 2000mm long, 50
7.03
mm diameter GI pipe, GI Strip of 24x3mm miminum in hard
rock locations only.
7.04 Erection of 8 SWG GI Coil 115 tonnes (1.85 kg) No

Erection of 8 SWG GI wire for earthing and guarding by MT
7.05
providing GI nut, bolts & washers, turn buckle etc
7.06
Excavation of stay pit in following type of soils, as per

8.00 scope of work, approved drawings and specifications:
8.01 Normal soil No

Erection of complete stay set with GI stay wire (7x3.15 Set

mm dia), binding of stay wire, by providing Guy stay
insulator (2 Nos.) and 0.2 cmt concreting 1 part cement,
9.00 3 part sand, 6 part 40 mm size stone aggregate chips
(1:3:6) as per technical specifications, approved
drawings and scope of works.
Erection, testing and commissioning of 11 kV insulator

including their hardware fittings as per technical
10.00

10.02 11 kV Disc insulator with strain hardware Set
Paying out, tensioning, binding of conductor and

tightening of stays and stringing, testing and
commissioning of ACSR Conductor of following sizes
11.00 including jointing sleeves, helical formed fittings,
jumpering and by providing & erecting PG Clamps etc as
required as per approved drawings, scope of work and
technical specifications
11.01 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel km
11.02 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit km
11.03 6/4.09 + 1/4.09 mm (80 mm² Al. Area) - Racoon km
11.04 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
Erection, Testing and Commissioning of 11 kV AB Set

Switch along with Support Insulators, Base Channel,
12.00 down Pipe, Arcing Horns etc. complete as per technical
specifications, scope of works and approved drawings
ERECTION, TESTING & COMMISSIONING OF 11 KV LINE Set

FOR UNDER GROUND RAILWAY CROSSING BY 2 Nos
(INCLUDING ONE SPARE) 3Cx185 Sqmm XLPE
Armoured Cable (0.3 km each) , USING 150MM DIA GI
PIPES, OUTDOOR HEAT SHRINKABLE CABLE JOINTING
KITS, LUGS, 4 Nos GI 3-METERS LONG EARTHING PIPE,
13.00 6 SWG GI WIRES, CABLE MARKERS, BI METALLICK
CLAMPS, JUMPERING WITH 11 KV ARIAL BUNCHED
CABLES (200mm dia, 10 mtrs), 11 KV STATION TYPE
LIGHTENING ARRESTORS (6 NOS.), ETC AS REQUIRED
AS PER TECHNICAL SPECIFICATIONS, APPROVED
DRAWINGS AND SCOPE OF THE WORK.
ERECTION, TESTING & COMMISSIONING of 11 KV LINE Set
FOR UNDER GROUND RAILWAY CROSSING BY 2 Nos
(INCLUDING ONE SPARE) 3Cx300 Sqmm XLPE
Armoured Cable (0.3 km each) , USING 150MM DIA GI
PIPES, OUTDOOR HEAT SHRINKABLE CABLE JOINTING
KITS, LUGS, 4 Nos GI 3-METERS LONG EARTHING PIPE,
14.00 6 SWG GI WIRES, CABLE MARKERS, BI METALLICK
CLAMPS, JUMPERING WITH 11 KV ARIAL BUNCHED
CABLES (200mm dia, 10 mtrs), 11 KV STATION TYPE
LIGHTENING ARRESTORS (6 NOS.), ETC AS REQUIRED
AS PER TECHNICAL SPECIFICATIONS, APPROVED
DRAWINGS AND SCOPE OF THE WORK.
Total
% discount, if any: __________________
Schedule-3 (4/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER REVAMPED REFORMS-
BASED AND RESULTS-LINKED,

D Erection, Testing and Commissioning of new Distribution
Transformer Substations
Service Description of Related Services (excludes inland transportation and Unit Quantity Unit price GST GST Total Price
No. other services required in India to convey the goods to their final payable on payable on per line item
destination) the price the price
quoted if quoted if
awarded awarded
(%) (Amount)
1 2 3 4 5 6 7 8
1.00 Excavation of pole pit (of depth 1/6th of pole length) in normal soil
as per scope of work, approved drawings and specifications:
1.01 8 m/140 kgs PCC Poles - (PCC Pole as per state practice) No
1.02 13 m long H-Beam 152x152 mm, 37.1 kg/mtr No
1.04 11 M long Steel Tubular poles with welded steel base plate of Designation No
540 SP 52 (IS 2713, Pt I, II, III 1980)
1.05 9 M long Steel Tubular poles with welded steel base plate of Designation 540 No
SP 28 (IS 2713, Pt I, II, III 1980)
Excavation of pole pit (of depth 1/6th of pole length) in soft rock
2.00 where blasting is not required as per scope of work, approved
drawings and specifications:
2.01

2.02

2.03
11 M long Steel Tubular poles with welded steel base plate of Designation No
2.04 540 SP 52 (IS 2713, Pt I, II, III 1980)
9 M long Steel Tubular poles with welded steel base plate of Designation 540 No
2.05 SP 28 (IS 2713, Pt I, II, III 1980)
Excavation of pole pit (of depth 1/6th of pole length) in hard rock
where blasting is required as per scope of work, approved drawings
3.00
and specifications:

3.01

3.02

3.03
3.04 540 SP 52 (IS 2713, Pt I, II, III 1980)
9 M long Steel Tubular poles with welded steel base plate of Designation 540
3.05 SP 28 (IS 2713, Pt I, II, III 1980)
Erection of following types of poles for 11/0.4 KV Distribution
transformer substation by providing and installing danger plate,
anti-climbing devices (barbed wire), earthing material (coil and
4.00 8SWG GI wire), red oxide & aluminium paint, pole numbering
including cement concrete foundation 1 part cement, 3 part sand, 6
part 40 mm size stone aggregate chips (1:3:6) etc as per scope of
8 m/140 Kgs PCC Poles with RCC Base plate/pad - Cement concreting 0.5 cmt No
4.01
13 m long H-Beam 152x152 mm, 37.1 kg/mtr - Cement concreting 0.65 cmt No
4.02
11 m long H-Beam 152x152 mm, 37.1 kg/mtr - Cement concreting 0.65 cmt No
4.03
4.04 540 SP 52 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.65 cmt
9 M long Steel Tubular poles with welded steel base plate of Designation 540 No
4.05 SP 28 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt
Excavation of stay pit in following type of soils, as per scope of

5.00 work, approved drawings and specifications:
Normal soil No
5.01
Soft rock soil where blasting is not required No

5.02
Hard rock soil where blasting is required No

5.03
Erection of complete stay set with GI stay wire (7x3.15 mm dia), Set
binding of stay wire, by providing Guy stay insulator (2 Nos.) and
6.00 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size
stone aggregate chips (1:3:6) as per technical specifications,
approved drawings and scope of works.
Erection, testing, commissioning of Pre-fabricated steel items like MT

DC cross arm (100x50x6 mm), back clamps (65x8 mm), pole clamp
(65x8 mm), DO mounting channel (100x50x6 mm), transformer
mounting channel (100x50x6 mm), transformer clamping set
7.00 (50x50x6 mm), transformer belting set ( 50x50x6 mm) and MS
nuts, bolts & washers including painting by red oxide & aluminium
as per technical specification, approved drawings and scope of
work.
Erection, testing and commissioning of 11 kV insulator including
their hardware fittings as per technical specification, approved
8.00
11 kV Pin insulator with GI pin Set

8.01
11 kV Disc insulator with strain hardware Set

8.02
9.00 Erection, Testing and Commissioning of Distribution Transformer

with all accessories as per scope of work, approved drawings and
specifications:
9.01 11/0.230 kV Distribution Transformer Substation 10 KVA 1 Phase Aluminium No
wound DTR
9.02 11/0.230 kV Distribution Transformer Substation 16 KVA 1 Phase Aluminium No

wound DTR
9.03 11/0.4 KV Distribution Transformer 16 KVA 3 phase Aluminium wound DTR No
9.08 11/0.4 KV Distribution Transformer 315 KVA 3 phase Copper wound DTR No
Erection, testing and Commissioning of Outdoor mounting type

Distribution box made of MS sheet of thickness not less than 1.8
mm, dust and moisture vermin, weather proof with degree of
protection IP 33 as per IS 13947 with suitable bus bars, earthing
bus, earthing terminals, box illumination, front door operated with
10.00 proper locking arrangement, non magnetic 4 mm thick gland plate,
double compression brass cable glands, lugs, mounting channel
frame, internal wiring with FRLS cables, danger plate, numbering,
back clamps, hardware as per scope of the work, technical
specifications and approved drawings suitable for following
transformer:
1 Ph 10 KVA transformer 45 A SPN MCCB (incomer) and 2 Nos. 32 A SP
10.01 MCCB (outgoing)
1 Ph 16 KVA transformer 80 A SPN MCCB (incomer) and 2 Nos. 50 A SP

10.02 MCCB (outgoing) No
3 Ph 16 KVA transformer 25 A TPN MCCB (incomer) and 6 Nos. 16 A SP

3 Ph 25 KVA transformer 40 A TPN MCCB (incomer) and 6 Nos. 25 A SP

3 Ph 63 KVA Transformer having 200 A TPN isolator, 100 A HRC fuse

10.05 (incomer) and 6 Nos. 60 A SP MCCB (outgoing) No
3 Ph 100 KVA Transformer having 200 A TPN isolator, 160A HRC fuse
Erection, testing and Commissioning of 3 Nos pipe earthing using

40mm dia GI pipe 3000 mm long, as per IS 1161, making earth grid
11.00 using 50x6mm GI Flat and riser and connecting risers to various Set
equipment as per scope of work, approved drawings and technical
specifications,
Erection, testing and commissioning of 8 SWG GI wires as per Scope MT

of work, technical specification and approved drawings
12.00
Erection, testing and Commissioning of 1.1 KV XLPE Aluminium

Conductor, Stranded, unarmoured cable for connection of
13.00 transformer LV bushing to Distribution Box and Distribution box to
overhead line as per Scope of work, technical specification and
approved drawings:
1Cx16 sqmm aluminium conductor cable

13.01 km
1CX35 sqmm aluminium conductor cable

km
13.02
13.03 km

km
13.04
13.05 km

km
13.06
Erection, testing and commissioning of ACSR Rabbit Conductor for Km
jumpering including PG Clamps, bi-metallic connectors, hardware
14.00 etc as per Technical Specification, approved Drawing & Scope of
works
Erection, testing and Commissioning of 12 KV, 200 A, 3-pole AB Sets

15.00 Switch for Distribution Transformer Substation as per Technical
Erection, testing and commissioning of 9 KV, 10 KA Distribution

16.00 Class Lightening Arrester for DT as per technical specification, Set
Erection, testing and commissioning of 11 kV, 3-ph, Drop Out fuse
units (set of 3 units) along with Support Insulators, Base Channel,
17.00 Sets
fuse barrel etc. complete as per technical specifications, scope of
works and approved drawings
Total
% discount, if any: __________________

Schedule-3 (5/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER
REVAMPED REFORMS-BASED AND RESULTS-LINKED,

E LT Line
Servic Description of Related Services (excludes inland Unit Quantity Unit price GST GST Total Price
e No. transportation and other services required in India payable on payable on per line item
to convey the goods to their final destination) the price the price
quoted if quoted if
awarded awarded
(%) (Amount)
1 2 3 4 5 6 7 8
Survey, route alignment & pole spotting, preparation Km
of survey report and uploading in the web portal after
1.00 approval of Project Manager
Excavation of pole pit (of depth 1/6th of pole length)

2.00 in normal soil as per scope of work, approved

2.01
11 M long Steel Tubular poles with welded steel base plate No

2.03 of Designation 540 SP 52 (IS 2713, Pt I, II, III 1980)


in soft rock where blasting is not required as per

3.01

3.02



in hard rock where blasting is required as per scope
4.00 of work, approved drawings and specifications:

4.01


Erection of following types of poles for LT overhead
climbing devices (barbed wire), earthing material
(coil and 8SWG GI wire), red oxide & aluminium
paint, pole numbering including cement concrete
foundation or refilling by bolders using cement
5.00 concreting foundation 1 part cement, 3 part sand, 6
part 40 mm size stone aggregate chips (1:3:6) or/and
200 mm average size bolders mixed with excavated
earth etc as per scope of work, approved drawings
and specifications:
8 m/140 kgs PCC Poles - (PCC Pole as per state practice) - No

5.01 Cement concreting 0.5 cmt
8 m/140 kgs PCC Poles - (PCC Pole as per state practice) - No
5.02 refilling with bolder & earth
5.04 of Designation 540 SP 52 (IS 2713, Pt I, II, III 1980) -
Cement concreting 0.65 cmt
concreting 0.5 cmt
Excavation of stay pit in following type of soils, as
6.00 per scope of work, approved drawings and
specifications:
6.01 Normal soil No
Erection of galvanised Stay Set with 50x8mm stay No

clamp, stay guy insulator, nut bolts, 2 Nos turn
buckle's, 1.8 m long, 16 mm diameter solid GS Stay
rod & 7/3.15 mm Dia GI stranded wire etc as
7.00 required by providing 0.2 cum cement concrete as
per approved drawings, technical specification and
scope of work.

8.00 approved drawings and scope of work.
8.01 Set
Excavation, erection, testing & commissioning of 40 mm dia.,
RCC cover plates on GI frame, bentonite powder and other
8.02 Set
Excavation, erection, testing & commissioning of Spike
Earthing 20mm solid Rod
8.03 Set
Excavation, erection, testing & commissioning of Chemical
rod earthing including electrode, chemical, with 2000mm
long, 50 mm diameter GI pipe, GI Strip of 24x3mm miminum
in hard rock locations only.
8.04 MT
Erection testing and commissioning of 8 SWG GI wire for
earthing including GI nuts, bolts & washers
Erection, testing and Commissioning of LT line with
following arrangements using areal bunched XLPE
cable including tension clamps for dead end,
suspension clamps, clamps for neutral, piercing
9.00 connectors type-I & type-II, 16 mm dia MS nuts &
bolts, pole clamps, etc as required as per technical
specification, approved drawings and scope of work:
9.01 AERIAL BUNCHED XLPE CABLE 3 X 50 SQ.MM+1x35 SQ. km

MM.+1x16 SQ. MM.
9.02 AERIAL BUNCHED XLPE CABLE 3 X 35 SQ.MM.+1x35 SQ. km
MM.+1x16 SQ. MM.
9.03 AERIAL BUNCHED XLPE CABLE 3 X 25 SQ.MM.+1x35 SQ. km
MM.+ 1x16 SQ. MM.
9.04 AERIAL BUNCHED XLPE CABLE 3 X 16 SQ.MM. + 1x16 SQ. km
MM. +1x25 SQ. MM.
MM.
MM.
Single phase service connection by providing Thermo- No
plastic insulated weatherproof cable of size 2 Core
2.5 sqm aluminium conductor (up to 35m length of
house hold from LT line), 10 SWG GI tension wire, 20
mm GI Pipe medium class to accept service cable at
consumer residence, single phase whole current 30A
temper proof electronic energy meter, 2 Nos. piano
type ISI marked 250V/5A switch. 1 ISI mark
250V/5A socket, 250V/5A ISI marked holder, 144-
10.00 288V, upto 9 watts, 710 lumen LED lamp 250V,5A
capacity ISI mark lamp holder, Internal wiring using
1.5 sqm copper multistrands PVC insulated ISI
marked cable, 250V/16A switch cartridge fuse
assembly of ISI marked and a 10mm dia earth
terminal point, internal wiring in ISI marked 12mm
dia PVC rigid pipes including its clamps, fittings and
fixtures as required as per REC drawing and
Specifications. Earth point would be connected with
existing earthing potential maintained by DISCOM
thro gh 10 SWG GI ire
Providing and installation of DDUGJY sign Board as
11.00 per scope of work, approved drawings and technical
specification,
11.01 Village Electrification Board and new 33/11 kV substation No
board of size 4ftx3ft by providing board, mounting angles,
11.02 Distribution Transformer Electrification Board with clamp - No
mounting on substation structure
Total
% discount, if any: __________________

Schedule-3 (6/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER
REVAMPED REFORMS-BASED AND RESULTS-LINKED,

Installation / Erection Charges : All prices in Indian Rupees
F Augmentation, Renovation and Modernisation of existing lines and substations
GST payable
GST payable
on the price
Description of Related Services (excludes inland on the price Total
Service Unit quoted if
transportation and other services required in India to Unit Quantity quoted if Price per
No. price Contract is
convey the goods to their final destination) Contract is line item
awarded
awarded (%)
(Amount)
1 2 3 4 5 6 7 8
Augmentation & Renovation of 11/0.4 kV Distribution

F(I)
Transformer Substation
Erection, testing & commissioning of augmented/new
Distribution Transformer by reconnecting 11 kV, LT,
earthing circuit providing suitable lugs, bi-metallic
clamps including supporting structure etc as required
1.00 as per technical specifications, approved drawings and
scope of the work. Replaced material and DTR to be
deposited in Employer's store:
New 63 KVA (11/0.4 kV) Aluminium wound DTR (Replacing

No
1.01 25KVA old DTR),
New 100 KVA (11/0.4 kV) Aluminium wound DTR (Replacing 63
KVA old DTR), No
1.02
New 200 KVA (11/0.4 kV) Aluminium wound DTR (Replacing
No
1.03 100 KVA old DTR),
New 315 KVA (11/0.4 kV) Copper wound DTR (Replacing 200
KVA old DTR), No
1.04
Erection, testing & commissioning of new 1.1 KV XLPE

Aluminium Conductor, Stranded, unarmoured cable for
connection of transformer LV bushing to Distribution
Box and Distribution box to overhead line by replacing
old cables and by bunching & providing cable ties and
2.00 cable lugs, double compression brass glands, etc as per
Scope of work, technical specification and approved
drawings. Replaced cables to be deposited in
Employer's store.
2.01 1Cx16 sqmm aluminium conductor cable km

1CX35 sqmm aluminium conductor cable km
2.02
2.03 1CX50 sqmm aluminium conductor cable km
1Cx70 sqmm aluminium conductor cable km
2.04
2.05 1Cx150 sqmm aluminium conductor cable km
1Cx300 sqmm aluminium conductor cable km
2.06
Erection, testing & commissioning of new outdoor

mounting type Distribution box made of MS sheet of
thickness not less than 1.8 mm, dust and moisture
vermin, weather proof with degree of protection IP 33
as per IS 13947 with suitable bus bars, earthing bus,
earthing terminals, box illumination, front door
operated with proper locking arrangement, non
3.00
magnetic 4 mm thick gland plate, double compression
brass cable glands, lugs, mounting channel frame,
internal wiring with FRLS cables, danger plate,
numbering, back clamps, hardware as per scope of the
work, technical specifications and approved drawings
suitable for following transformer:
1 Ph 10 KVA transformer 45 A SPN MCCB (incomer) and 2 Nos.
3.01 32 A SP MCCB (outgoing) No
1 Ph 16 KVA transformer 80 A SPN MCCB (incomer) and 2 Nos.

3.02 50 A SP MCCB (outgoing) No
3 Ph 16 KVA transformer 25 A TPN MCCB (incomer) and 6

3.03 Nos. 16 A SP MCCB (outgoing) No
3 Ph 25 KVA transformer 40 A TPN MCCB (incomer) and 6

3.04 Nos. 25 A SP MCCB (outgoing) No
3 Ph 63 KVA Transformer having 200 A TPN isolator, 100 A

3.05 HRC fuse (incomer) and 6 Nos. 60 A SP MCCB (outgoing) No
3 Ph 100 KVA Transformer having 200 A TPN isolator, 160A



Renovation & commissioning of DTR substation
4.00 Earthing as per technical specification, approved
drawings and scope of work:
Revamping of Distribution Transformer substation earthing by
using 40 mm dia 3 meter long GI pipe earthing, using 50x6 mm
4.01 GS flat for earth mat and riser and 25x3mm GS flat for No
connecting equipment, using 200 kg bentonite powder of
substation in normal soil
Revamping of Distribution Transformer substation earthing by
using 3 Nos. chemical rod earthing including electrode &
4.02 chemical, 50x6 mm GS flat for earth mat and riser and 25x3mm No
GS flat for connecting equipment in hard rock soil
Erection, testing & commissioning of new Pre-

fabricated steel items like DC cross arm (100x50x6
mm), back clamps (65x8 mm), pole clamp (65x8 mm),
DO mounting channel (100x50x6 mm), transformer
mounting channel (100x50x6 mm), transformer
5.00 MT
clamping set (50x50x6 mm), transformer belting set (
50x50x6 mm) and by providing red oxide & aluminium
painting as per technical specification, approved
Erection, testing & commissioning of new MS Nuts,

Bolts with Washers as per technical specification,
6.00 MT
Erection, testing & commissioning of new Polymer/

Porcelain Insulators with hardware fittings, hardware
7.00 etc as required as per technical specification, approved
11 KV, Disc Insulator with suitable hardware fittings

7.01 Set
11 KV, Post Insulators / Pin Insulators with hardware fittings
7.02 Set
Erection, testing & commissioning of new 11 KV

Distribution Class Lightening Arrester for DT as per
8.00 No
technical specification, approved drawings and scope of
work.
Erection, testing & commissioning of new 11 kV, 3-ph,

200 A, 3 Pin type, Vertical Mounting type, Gang
Operated, AB Switch along with Support Insulators,
9.00 Sets
Base Channel, down Pipe, Arcing Horns etc. complete as
per technical specifications, scope of works and
approved drawings
Renovation of existing Distribution Transformer by

providing and topping up of transformer oil including
10.00 replacement of suitable silica gel breather of existing ltr
type & size as per technical specifications, approved
drawings and scope of works. .
Erection, testing & commissioning of 11kV, 200 A, 3-ph

Drop Out fuse assembly including insulators and
mounting arrangements, jumpering from bus bar,
11.00 hardware, etc as required as per technical Set
specifications, approved drawings and scope of the
works.
F(II) Augmentation of 33 KV lines
1.00 Excavation of additional pole pit (of depth 1/6th of pole

length) in normal soil as per scope of work, approved
1.01 9.1 meter long /280 KG PCC Poles (PCC Pole as per state No
practice)
length) in soft rock where blasting is not required as
per scope of work, approved drawings and
specifications:
practice)

length) in hard rock where blasting is required as per
practice)
4.00 Erection of following types of additional poles matching
with existing line supports by providing and installing
danger plate, anti-climbing devices (barbed wire),
earthing material (coil and 8SWG GI wire), red oxide &
aluminium paint, pole numbering excluding cement
concrete foundation using cement concreting
foundation 1 part cement, 3 part sand, 6 part 40 mm
size stone aggregate chips (1:3:6) etc as per scope of
practice) - cement concreting (0.5 cmt)
4.02 13 m long H-Beam 152x152 mm 37.1 kg/mtr - cement No

5.01 Normal soil No
6.00 Erection of complete stay set with GI stay wire (7x4.00 Set
insulator (2 Nos.) and 0.3 cmt concreting 1 part
cement, 3 part sand, 6 part 40 mm size stone aggregate
chips (1:3:6) as per technical specifications, approved
7.00 Erection, testing and commissioning of 33 kV insulator

7.02 33 kV Disc insulator with strain hardware (set of 3, 11 KV disc Set

insulators)
Erection, testing & commissioning of new Pre-
fabricated steel items like V cross arm, top clamp, DC
cross arm, bracket, clamps, cross bracings, bracings,
strain plate, guarding channels, back clamp, etc made
8.00 of MS Channels, MS angle, MS flats of given sizes for MT
over head structures and providing red oxide &
aluminium painting as per technical specification,
Dismantling of existing overhead line conductor and

fittings, depositing the dismantled material to
employer's store and paying out & stringing of new
9.00 ACSR conductor of following sizes by providing jointing
sleeves, binding wire & tape & helical formed fittings
etc as required as per technical specification, approved
6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog replacing
9.01 existing racoon conductor km
6/4.09 + 1/4.09 mm (80 mm² Al. Area) - Racoon replacing

9.02 existing rabbit/weasel conductor km
30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther replacing

9.03 existing dog/racoon conductor km
Augmentation of 3 phase 33 kV line using new Insulator

10.00 and hardware as per technical specification, approved
drawings and scope of work
33 KV polymer/porcelain Disc insulator 45 KN along with

10.01 suitable hardware fittings Set
33 KV Polymer /porcelain Pin Insulators 10 KN with GI PIN

10.02 Set
Erection, testing & commissioning of earthing as per

11.00 technical specificatons, approved drawings and scope
of work.
40 mm dia., 3000 mm long GI pipe earth electrode with test
11.01 link, RCC pit, RCC cover plate on GI frame, bentonite powder Set
and other accessories complete
11.02 GI Earthing spike made of 20mm solid Rod Set
Chemical rod earthing including electrode, chemical, with
11.03 2000mm long, 50 mm diameter GI pipe, GI Strip of 24x3mm Set
miminum in hard rock locations only.
Erection, testing & commissioning of new 33kV, 600A,

25kA, 3-ph, 3 Pin type, Vertical Mounting type, Gang
12.00 Operated, AB Switch along with Support Insulators, Set
Base Channel down Pipe, Arcing Horns etc. complete as
per technical specifications, scope of works and
approved drawings
Erection, testing & commissioning of new GI wire for
13.00 earthing and guarding as per technical specification,
13.01 6 SWG MT
13.02 8 SWG MT
F(III) Augmentation of 11 KV lines

1.04 11 M long Steel Tubular poles with welded steel base plate of No
specifications:

4.00 Erection of following types of poles for 11 KV overhead

climbing devices (barbed wire), earthing material (coil
and 8SWG GI wire), red oxide & aluminium paint, pole
numbering excluding cement concrete foundation or
1 part cement, 3 part sand, 6 part 40 mm size stone
4.01 8 m/140 Kgs PCC Poles with RCC Base plate/pad including No
practices of PCC pole and base plate/stone to be used)
concreting as per scope of work, technical specifications and
approved drawings,
4.03 13 m long H-Beam 152x152 mm, 37.1 kg/mtr - Cement No
concreting 0.65 cmt
concreting 0.65 cmt
Designation 540 SP 52 (IS 2713, Pt I, II, III 1980) - Cement
concreting 0.65 cmt
concreting 0.5 cmt

5.01 Normal soil No

7.00 Erection, testing and commissioning of 11 kV insulator

7.02 11 kV Disc insulator with strain hardware Set
Dismantling of existing overhead line conductor &

fittings and depositing to Employer's store, Paying out,
tensioning, binding of new conductor and tightening of
stays and stringing, testing and commissioning of ACSR
8.00 Conductor of following sizes including jointing sleeves,
helical formed fittings, jumpering and by providing &
erecting PG Clamps etc as required as per approved
6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing

8.01 existing weasel/squirrel condcutor km
6/4.09 + 1/4.09 mm (80 mm² Al. Area) - Racoon by replacing

8.02 km
existing rabbit/weasel/squirel condcutor
6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing
8.03 existing racoon/rabbit condcutor km
Erection, Testing and Commissioning of 11 kV AB

Switch along with Support Insulators, Base Channel,
9.00 down Pipe, Arcing Horns etc. complete as per technical Set
Erection, testing & commissioning of pre-fabricated MT

steel items like V cross arm, top clamp, DC cross arm,
bracket, clamps, cross bracings, bracings, strain plate,
guarding channels, back clamp, etc made of MS
10.00 Channels, MS angle, MS flats of given sizes for over
head structures and MS nuts, bolts & washers including
painting by red oxide & aluminium paint as per
technical specification, approved drawings and scope of
work.
11.00 approved drawings and scope of work.
Excavation, erection, testing & commissioning of 40 mm dia., Set

11.01
RCC cover plates on GI frame, Charcoal, Salt and other
11.02
20mm solid Rod
Excavation, erection, testing & commissioning of Chemical rod Set
earthing including electrode, chemical, with 2000mm long, 50
11.03
mm diameter GI pipe, GI Strip of 24x3mm miminum in hard
rock locations only.
MT
Erection of 8 SWG GI wire for earthing and guarding by
11.04
11.05
Conversion of existing LT lines on bare conductor to
F(IV)
Areal bunch XLPE cable

specifications:

4.00 Erection of following types of poles for LT overhead line
devices (barbed wire), earthing material (coil and
8SWG GI wire), red oxide & aluminium paint, pole
numbering excluding cement concrete foundation or
1 part cement, 3 part sand, 6 part 40 mm size stone
practices of PCC pole and base plate/stone to be used)
concreting as per scope of work, technical specifications and
approved drawings,
concreting 0.65 cmt
concreting 0.65 cmt
concreting 0.65 cmt
concreting 0.5 cmt

5.01 Normal soil No

Removal of existing LT bare conductor line & fixtures,

depositing to stores of employer and erection, testing &
commissioning of new areal bunched XLPE
cable,tension clamps for dead end, suspension clamps,
clamps for neutral, piercing connectors type-I & type-
7.00 II, 16 mm dia MS nuts & bolts, pole clamps, spring
loaded bus bar suitable for single phase and three
phase systems etc. as required as per technical
specification, approved drawings and scope of work:
AERIAL BUNCHED XLPE CABLE 3 X 50 SQ.MM+1x35 SQ.

7.01 Km
MM.+1x16 SQ. MM.
AERIAL BUNCHED XLPE CABLE 3 X 35 SQ.MM.+1x35 SQ.

7.02 Km
MM.+1x16 SQ. MM.
AERIAL BUNCHED XLPE CABLE 3 X 25 SQ.MM.+1x35 SQ.
7.03 Km
MM.+ 1x16 SQ. MM.
AERIAL BUNCHED XLPE CABLE 3 X 16 SQ.MM. + 1x16 SQ.
7.04 Km
MM. +1x25 SQ. MM.
7.05 Km
MM.
7.06 Km
MM.
Erection, testing & commissioning of earthing by

inserting GI Earthing spike made of 20mm solid Rod as
8.00 per approved drawings, scope of work and technical Set
specifications
Erection of 8 SWG GI wire for earthing by providing GI

nut, bolts & washers, turn buckle etc as per approved
9.00 MT
F (V) Augmentation of 33/11 KV Fully outdoor type
substation
F (Va) Civil works: Design, supply of all material, T&P, labour
etc for the following civil works complete as per
works
Soil Investigation & Contour Survey of Substation area PER
1.00
S/S

2.00 footpath Sq. m
Design, engineering and construction of transformer

foundation considering original equipment
manufacturer prescription including excavation of pit,
shuttering, reinforcement, cement concreting including
3.00
providing and erecting guiding rail, wheel stopper etc
as per Technical Specification, approved Drawing &
Scope of works for following sizes of transformer:

Design, engineering and construction of outdoor
mounted Vacuume Circuit Breaker foundation
prescription including excavation of pit, shuttering and
4.00 by providing reinforcement, cement concreting,
Drawing & Scope of works. Works also includes
providing working platform for operation of breakers
d i ti
4.01 33 KV VCB CMT
4.02 11 KV VCB CMT

foundation and erection of gantry structure (PCC
pole/H-Beam/lattice structure) including top muffing
5.00 and its painting by excavation of pit and by providing CMT
shuttering, cement concreting (0.65 cmt per structure)
etc as per Technical Specification, approved Drawing &
Scope of works
Design, engineering and construction of cement

concrete Cable Trench of 0.5 Mtr wide, required depth,
precast RCC Trench Cover, Water slop, cable supporting
6.00 angles including Labour, Reinforcement Steel, MS R/Mtr
Angles, Flats, Steel Frame Work, Excavation etc, all
complete as per Technical Specification, approved
F (Vb) Substation Electrical works

kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor
Conventional type Power Transformer along with
transformer oil, Buchholtz relay, breather, OTI & WTI,
Marshalling Box, Conservator tank, oil level indicator,
1.00 valves by providing 2 sets of 50x8 mm GS Neutral
Earthing strips with braided conductor on bushing end
supported with insulators, OTI & WTI Indicators, Vent
explosion plug, control wiring / cabling, cable
supporting tray on the body, transformer wheels,
bushing etc as per Technical Specification, approved
Drawing & Scope of works
Fabrication and Erection of Gantry structures using MS

channel, MS angle and MS flat of various sizes including
MS nuts & bolts, by providing red oxide painting and
2.00 aluminium painting etc as required as per Technical MT
Erection, testing and commissioning of 36kV, 1250A,

25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit
breaker along with 36kV, 1-Phase, 200-100/1-1 Amps
outdoor type Current Transformer along with junction
box (1 no junction box for 3 no of 1-phase CTs)],
3.00 Jumpers, earthing, supporting structures, maintenance SET
platform, marshalling box, control cabling between VCB
and indoor control panel and required accessories
Design, Engineering providing and installation of ISMC
75 channel on top of indoor trench, erection of panels
on ISMC 75 channels, welding, testing and
commissioning of 33kV indoor Control & Relay panel
along with E/F & O/C relays, control and power supply
4.00 cabling in trench between field equipment and panels,
Mimic Diagram, Voltmeter, Ammeter, Annunciation
Windows with annunciation relays and other
components etc as per approved drawings, technical
specifications and scope of the work for controlling:
4.01 33 kV feeder VCB with Static Tri-Vector Energy Meter etc No

4.02 33 kV Power transformer VCB with Static Tri-Vector Energy
Meter, No

25kA for 3 sec, 3-ph double break center rotating type
(DBCR), Gang Operated, isolator along with Support
5.00 Insulators, Operating Mechanism, Base Channel down Set
Pipe and all required accessories complete as per
approved drawings, technical specifications and scope
of the work,
Erection, testing and Commissioning of 30kV, 10kA, 1-
ph Station Class Lightening Arresters with mounting
platform, jumpering from bus bar, earthing connection
6.00 using 50x6mm GS flat, hardware etc as required, as per No
of the work,

Station Class Lightening Arrester with mounting
7.00 using 50x6mm GS flat, hardware, etc as required as per No
of the work.
Erection, testing and Commissioning of 36 kV, 1-Phase,

33kV/110 volt, Single core outdoor type Potential
transformer along with junction box (1 no junction box
for 3 no of 1-phase PTs) including control and power
8.00 supply cabling, earthing connection using 50x6mm GS Set
flat and required accessories etc., complete as per as
per approved drawings, technical specifications and
scope of the work,
Erection, wiring, testing and commissioning of 12 kV,

1250 A, 25kA, 3-ph, Outdoor type Vacuum Circuit
breaker along with 12 kV, 1-Phase, 300-150/5-5 A and
300-150/5-5, outdoor type Current Transformer along
with junction box (1 no junction box for 3 no of 1-
9.00 Set
phase CTs), Jumpers, earthing, supporting structures,
permanent maintenance platform, marshalling box,
control cabling between VCB and indoor control panel
and required accessories complete as per approved
drawings, technical specifications and scope of the
Design, Engineering, providing foundation channel

ISMC 75, erection, welding with MS angle of trench,
wiring, control and power supply cabling in trench
between field equipment and panels, testing and
10.00 commissioning of 11kV indoor type control and relay Set
panel consisting of A-meter, volt-meter, Relay &
accessories complete as per specifications for
transformer breaker as per approved drawings,
10.01 Transformer Protection Breaker Panel No
10.02 Feeder Protection Breaker Panel No
cabling, testing and commissioning of 24V, 80 AH (or as
per state practice) Ni-Cd or Pb Acid battery on battery
stand made of teak wood duly painted with anti rusting
paint, battery insulators, inter-battery wiring using 30
11.00 Set
sqmm copper single core multi strand cable, terminal
connectors, & all other accessories and connectors as
per as per approved drawings, technical specifications
and scope of the work,

commissioning of 24V, 40 Amp. (or as per state
12.00 practice) Float-Cum-Boost Battery Charger with full No
wave rectification for 220 V, 1 phase, 50 Hz AC Input
Supply as per approved drawings, technical
specifications and scope of the work,
415 V, ACDB along with three phase-neutral

voltmeter, three phase ammeter and Selector
switches, 200 Amps TPN switch fuse unit as incomer, 32
Amps TPN switches as outgoing feeders suited for
13.00 number of control panels, nos of VCB kiosk panel, No
having 20% spare outgoing feeders, mounting
arrangements etc as per technical specifications,
24 Volts (or voltage as per state practices) Direct

Curent Distribution Board (DCDB) Indoor floor mounted
comprising of 2P/100A DC Switch Fuse Unit as
incommer and 2P/40A switch fuse units for each
14.00 individual outgoing circuit of indoor control panels, Set
indoor/outdoor VCB panels, control room emergency
DC lighting including 20% as spare as per technical
specifications, approved drawings and scope of works. .
Excavation, laying, welding, refilling, earthing &

grounding conductor as per Approved Electrical Layout
for each sub-station and erection of riser up to various
15.00 equipment/gantry structures as per Technical Set
15.01 75 x 8 mm MS flat for ground mat MT

15.02 50 x 6 mm Galvanized GS flat (risers) MT
15.03 25 x 3 mm Galvanized GI flat (risers) MT
15.04 25 mm dia GI Rod 3 m long for earth mat MT
Excavation, erection, testing and commissioning of 40

mm dia., 3000 mm long GI pipe earth electrode by
providing test link, RCC pit, RCC cover, placed on GI
frame, bentonite powder and other accessories
16.00 Set
complete as per approved drawings, technical
specifications and scope of the work for power
transformer neutral, station transformer neutral,
lightening arresters direct earthing.

(Panther Conductor) and droppers (dog conductor) bus
jumpers to various equipment using 11 KV and 33 KV
17.00 insulators, GI Pin, GI Hardware fittings, PG Clamps, T- km
connectors etc as required as per approved drawings,
Excavation, foundation, Erection, testing and

commissioning through erection of support, Capacitor
bank equipment in the substation yard, erection,
18.00 testing and commissioning of VCB, VCB Panel, Control
and power supply cabling, Earthing, etc as required as
per approved drawings, specifications and scope of
work.
18.01 600 KVAr Set
18.02 1200 KVAr Set
18.03 1500 KVAr
19.00 including supply of glands, lugs, cable ties, etc as
required as per Technical Specification, approved


MTR
insulated and PVC sheathed cable
F (VI) Augmentation of 33/11 KV partly outdoor type

substation
F(VIa) Civil works: Design, supply of all material, T&P, labour

etc for the following civil works complete as per
works

1.00 footpath as per Technical Specification, approved Sq. m
Design, engineering and construction of transformer

foundation considering original equipment
manufacturer prescription including excavation of pit,
shuttering, reinforcement, cement concreting including
2.00
providing and erecting guiding rail, wheel stopper etc
as per Technical Specification, approved Drawing &
Scope of works for following sizes of transformer:

Design, engineering and construction of outdoor

mounted Vacuume Circuit Breaker foundation
prescription including excavation of pit, shuttering and
3.00 by providing reinforcement, cement concreting,
Drawing & Scope of works. Works also includes
providing working platform for operation of breakers
and painting
3.01 33 KV VCB CMT
3.02 11 KV VCB CMT

foundation and erection of gantry structure (PCC
pole/H-Beam/lattice structure) including top muffing
and its painting by excavation of pit and by providing
4.00 CMT
shuttering, cement concreting (0.65 cmt per structure)
etc as per Technical Specification, approved Drawing &
Scope of works
Design, engineering and construction of cement

concrete Cable Trench of 0.5 Mtr wide, required depth,
precast RCC Trench Cover, Water slop, cable supporting
5.00 angles including Labour, Reinforcement Steel, MS R/Mtr
Angles, Flats, Steel Frame Work, Excavation etc, all
F(VIb) Substation Electrical works

kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor
Conventional type Power Transformer along with
transformer oil, Buchholtz relay, breather, OTI & WTI,
Marshalling Box, Conservator tank, oil level indicator,
valves by providing 2 sets of 50x8 mm GS Neutral
1.00
Earthing strips with braided conductor on bushing end
supported with insulators, OTI & WTI Indicators, Vent
explosion plug, control wiring / cabling, cable
supporting tray on the body, transformer wheels,
bushing etc as per Technical Specification, approved
Fabrication and Erection of Gantry structures using MS

channel, MS angle and MS flat of various sizes including
MS nuts & bolts, by providing red oxide painting and
2.00 MT
aluminium painting etc as required as per Technical

25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit
breaker along with 36kV, 1-Phase, 200-100/1-1 Amps
outdoor type Current Transformer along with junction
box (1 no junction box for 3 no of 1-phase CTs)],
3.00 Jumpers, earthing, supporting structures, maintenance SET
platform, marshalling box, control cabling between VCB
and indoor control panel and required accessories
Design, Engineering providing and installation of ISMC

75 channel on top of indoor trench, erection of panels
on ISMC 75 channels, welding, testing and
commissioning of 33kV indoor Control & Relay panel
along with E/F & O/C relays, control and power supply
4.00 cabling in trench between field equipment and panels,
Mimic Diagram, Voltmeter, Ammeter, Annunciation
Windows with annunciation relays and other
components etc as per approved drawings, technical
specifications and scope of the work for controlling:
4.01 33 kV feeder VCB with Static Tri-Vector Energy Meter etc

No
4.02 33 kV Power transformer VCB with Static Tri-Vector Energy

Meter, No

25kA for 3 sec, 3-ph double break center rotating type
(DBCR), Gang Operated, isolator along with Support
5.00 Insulators, Operating Mechanism, Base Channel down Set
Pipe and all required accessories complete as per
of the work,
Erection, testing and Commissioning of 30kV, 10kA, 1-

ph Station Class Lightening Arresters with mounting
6.00 using 50x6mm GS flat, hardware etc as required, as per No
of the work,

Station Class Lightening Arrester with mounting
7.00 using 50x6mm GS flat, hardware, etc as required as per No
of the work.
Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph,
indoor type Vacuum Circuit breaker and indoor control
panel by providing ISMC 100 channel, levelling,
alignment and welding on existing cable trench in
control room. Erection, testing & commissioning of
indoor VCB panel including 3 Nos indoor type Current
Transformer, Potential Transformer, indoor mounting
8.00
type control panel, by providing control cabling
between VCB and indoor control panel and required
accessories, bi-metallic clamps, A-meter, volt-meter,
Relay & accessories complete for following
arrangements and protection as per approved
drawings, technical specifications and scope of the
work. :
8.01 Transformer Protection Set
8.02 Feeder Protection Set

8.03 Bus coupler Set

cabling, testing and commissioning of 24V, 80 AH (or as
per state practice) Ni-Cd or Pb Acid battery on battery
stand made of teak wood duly painted with anti rusting
paint, battery insulators, inter-battery wiring using 30
+ Set
sqmm copper single core multi strand cable, terminal
connectors, & all other accessories and connectors as
per as per approved drawings, technical specifications
and scope of the work,

commissioning of 24V, 40 Amp. (or as per state
10.00 practice) Float-Cum-Boost Battery Charger with full No
wave rectification for 220 V, 1 phase, 50 Hz AC Input
Supply as per approved drawings, technical
specifications and scope of the work,
415 V, ACDB along with three phase-neutral

voltmeter, three phase ammeter and Selector
switches, 200 Amps TPN switch fuse unit as incomer, 32
Amps TPN switches as outgoing feeders suited for
11.00 number of control panels, nos of VCB kiosk panel, No
having 20% spare outgoing feeders, mounting
arrangements etc as per technical specifications,
24 Volts (or voltage as per state practices) Direct

Curent Distribution Board (DCDB) Indoor floor mounted
comprising of 2P/100A DC Switch Fuse Unit as
incommer and 2P/40A switch fuse units for each
12.00 individual outgoing circuit of indoor control panels, Set
indoor/outdoor VCB panels, control room emergency
DC lighting including 20% as spare as per technical
specifications, approved drawings and scope of works.
Excavation, laying, welding, refilling, earthing &

grounding conductor as per Approved Electrical Layout
for each sub-station and erection of riser up to various
13.00 Set
equipment/gantry structures as per Technical
13.01 75 x 8 mm MS flat for ground mat MT

13.02 50 x 6 mm Galvanized GS flat (risers) MT
13.03 25 x 3 mm Galvanized GI flat (risers) MT
13.04 25 mm dia GI Rod 3 m long for earth mat MT
Excavation, erection, testing and commissioning of 40

mm dia., 3000 mm long GI pipe earth electrode by
providing test link, RCC pit, RCC cover, placed on GI
frame, bentonite powder and other accessories
14.00 Set
complete as per approved drawings, technical
specifications and scope of the work for power
transformer neutral, station transformer neutral,
lightening arresters direct earthing.
(Panther Conductor) and droppers (dog conductor) bus
jumpers to various equipment using 11 KV and 33 KV
15.00 insulators, GI Pin, GI Hardware fittings, PG Clamps, T- km
connectors etc as required as per approved drawings,

16.00 including supply of glands, lugs, cable ties, etc as
required as per Technical Specification, approved


Laying, erection, termination using indoor & outdoor

termination kit, 11KV XLPE, Power armored cables of
17.00 following sizes as per technical specifications, approved
drawings and scope of works.:
17.01 3Cx300 sqmm km

17.02 3Cx240 sqmm km
17.03 3Cx35 sqmm km
Erection, Testing & Commissioning of 11 KV

CAPACITOR BANK INCLUDING MOUNTING STEEL
GALVANISED STRUCTURE AND ACCESSORIES AS
F(VII)
REQUIRED AS PER DETAILED TECHNICAL
SPECIFICATIONS, DRAWING AND SCOPE OF WORKS IN
FOLLOWING ARRANGEMENTS:
CAPACITOR BANK 600 KVAR - FIXED TYPE SUBSTATION
1.00 MOUNTED WITH CAPACITOR SWITCH AND ASSOCIATED Set
ACCESSORIES
CAPACITOR BANK 1200 KVAR - AUTO TYPE SUBSTATION

MOUNTED WITH ALL ASSOCIATED EQUIPMENT LIKE 11 KV
VCB, C&R PANEL, CTs, 11 KV 200A ISOLATORS WITH EARTH
SWITCH, RVT, 11 KV STATION CLASS LA, RED OXIDE /
2.00 ALUMINIUM PAINTING, 2.5 SQ.MM. PVC ARMOURED Set
STRANDED COPPER CONTROL CABLES, PROTECTION CIRCUIT
AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS & BOLTS
ETC AS REQUIRED AS PER APPROVED TECHNICAL
CAPACITOR BANK 1500 KVAR - AUTO TYPE SUBSTATION

MOUNTED WITH ALL ASSOCIATED EQUIPMENT LIKE 11 KV
VCB, C&R PANEL, CTs, 11 KV 200A ISOLATORS WITH EARTH
SWITCH, RVT, 11 KV STATION CLASS LA, RED OXIDE /
3.00 ALUMINIUM PAINTING, 2.5 SQ.MM. PVC ARMOURED Set
STRANDED COPPER CONTROL CABLES, PROTECTION CIRCUIT
AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS & BOLTS
ETC AS REQUIRED AS PER APPROVED TECHNICAL
Total
% discount, if any: __________________

Schedule-3 (7/8)
DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT XXXX [ Name of the District] District of XXXX [ Name of State ] UNDER REVAMPED REFORMS-BASED AND RESULTS-
LINKED,
G HIGH VOLTAGE DISTRIBUTION SYSTEM (HVDS)
GST payable on the

Description of Related Services (excludes inland GST payable on the
Service price quoted if Total Price per
transportation and other services required in India to Unit Quantity Unit price price quoted if Contract
No. Contract is awarded line item
convey the goods to their final destination) is awarded (Amount)
(%)
1 2 3 4 5 6 7 8
Survey, route alignment & pole spotting, preparation of Km

1.00 survey report and uploading in the web portal after
approval of Project Manager

2.00 normal soil as per scope of work, approved drawings and
specifications:
8 m/140 kgs PCC Poles (PCC Pole as per state practice) No

2.01

2.02


3.00 soft rock where blasting is not required as per scope of

3.01

3.02


4.00 hard rock where blasting is required as per scope of work,
approved drawings and specifications:

4.01

4.02

Erection of following types of poles for 11 KV overhead line

devices (barbed wire), earthing material (coil and 8SWG GI
wire), red oxide & aluminium paint, pole numbering
including cement concrete foundation or refilling by
5.00 bolders using cement concreting foundation 1 part cement,
3 part sand, 6 part 40 mm size stone aggregate chips
(1:3:6) or/and 200 mm average size bolders mixed with
excavated earth etc as per scope of work, approved
8 m/140 Kgs PCC Poles with RCC Base plate/pad including refilling No
5.01 by brick ballast/ stone bolder as required - (state practices of PCC
pole and base plate/stone to be used)
8 m/140 Kgs PCC Poles with RCC Base plate/pad - Cement No

11 m long H-Beam 152x152 mm, 37.1 kg/mtr - Cement concreting No

5.04 0.65 cmt

concreting 0.5 cmt
Erection, testing & commissioning of Pre-fabricated steel
items like V cross arm, top clamp, DC cross arm, bracket,
clamps, cross bracings, bracings, strain plate, guarding
channels, back clamp, transformer mounting structure, DO
mounting channel, Transformer clamping set, bracket,
6.00 clamps, cross bracings, bracings, strain clamp, guarding MT
channels, back clamp and MS nut, bolts & washers etc
including red oxide and aluminium painting as per technical
Erection, testing & commissioning of earthing arrangement

7.00 as per technical specification, approved drawings and
scope of work.
40 mm dia., 3000 mm long GI pipe earth electrode with test link,

7.01 RCC pit, RCC cover plate on GI frame, bentonite powder and other Set
Spike earthing made of 20mm dia solid GI rod

7.02 Set
Erection of 8 SWG GI Coil 115 tonnes (1.85 kg)

7.03 No
8 SWG GI Wire, GI nuts, bolts & washers

7.04 MT
Erection, testing & commissioning of Distribution

Transformer Substation earthing using 3 Nos pipe earthing
using 40mm dia GI pipe 3000 mm long, as per IS 1161 and
8.00 as per REC construction drawings, making earth grid using Set
50x6mm GS Flat and riser as per scope of work, approved
drawings and technical specifications,
Excavation of stay pit in following type of soils, as per

Normal soil No
9.01
Soft rock soil where blasting is not required No

9.02
Hard rock soil where blasting is required No

9.03
Erection of complete stay set with GI stay wire (7x3.15 mm Set

dia), binding of stay wire, by providing Guy stay insulator
(2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand,
6 part 40 mm size stone aggregate chips (1:3:6) as per
10.00
technical specifications, approved drawings and scope of
works.
Erection, testing & commissioning of Porcelain / Polymer

Insulators with mounting hardware, fittings as per
11.00 technical specification, approved drawings and scope of
work.
11 KV 45 KN Disc Insulator with hardware fittings

11.01 set
11 KV Pin insulators with GI Pin

11.02 set
Removal of existing LT overhead line conductor and

fixtures including shifting to Employer's store and erection,
testing & commissioning of ACSR Conductors of following
sizes with Jointing sleeves, binding materials, PG clamps,
12.00 bi-metallic conductor, hardware etc for overhead line and
jumpers as required as per technical specification,
6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

12.01 km
6/3.35 + 1/3.35 mm mm (50 mm² Al. Area) - Rabbit

12.02 km
Erection, testing & commissioning of 12kV, 600A, 25kA for

3sec, 3-ph, 3 Pin type, Vertical Mounting type, Gang
Operated, AB Switch along with Support Insulators, Base
13.00 Channel down Pipe, Arcing Horns etc. complete as per Set
technical specifications, scope of works and approved
drawings
Erection, testing & commissioning of Distribution

14.00 Transformer with all accessories as per as per technical
Single Phase 10 KVA
14.01 No
Single Phase 16 KVA

14.02 No
Three Phase 16 KVA

14.03 No
Three Phase 25 KVA

14.04 No
Three Phase 63 KVA

14.05 No
Three Phase 100 KVA

14.06 No
Erection, testing & commissioning of Distribution Class 9

KV, 10 KA Lightening Arrester (Set of 3 units) for DT as per
15.00 technical specification, approved drawings and scope of Set
work.
Erection, testing & commissioning of 11 kV, 3-ph, Drop Out

fuse units (set of 3 units) along with Support Insulators,
16.00 Base Channel, fuse barrel etc. complete as per technical Set
Erection, testing & commissioning of LT Distribution box

and LT control mechanism as per scope of the work,
17.00 technical specifications and approved drawings suitable for
following transformer:
Single Phase 10 KVA

17.01 No
Single Phase 16 KVA

17.02 No
Three Phase 16 KVA

17.03 No
Three Phase 25 KVA

17.04 No
Three Phase 63 KVA

17.05 No
Three Phase 100 KVA

17.06 No
Erection, testing & commissioning of 1.1 KV PVC insulated,

PVC sheathed, Aluminium Conductor, Stranded,
unarmoured cable for connection of transformer LV
18.00 bushing to Distribution Box and Distribution box to
overhead line as per Scope of work, technical specification
and approved drawings:

18.01 km

18.02 km
3.5CX25 sqmm aluminium conductor cable

18.03 km
Total
% discount, if any: __________________

5 RDSSPart ISection 4price Bid Schedule2ETC

Uploaded by

Copyright:

Available Formats

5 RDSSPart ISection 4price Bid Schedule2ETC

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

5 RDSSPart ISection 4price Bid Schedule2ETC

Uploaded by

Copyright:

Available Formats

Schedule-3 (1/8)

1.00 Survey, route alignment & pole spotting, preparation of Km

2.00 Excavation of pole pit (of depth 1/6th of pole length) in

2.02 13 m long H-Beam 152x152 mm 37.1 kg/mtr No

3.00 Excavation of pole pit (of depth 1/6th of pole length) in

3.02 13 m long H-Beam 152x152 mm 37.1 kg/mtr No

4.00 Excavation of pole pit (of depth 1/6th of pole length) in

4.02 13 m long H-Beam 152x152 mm 37.1 kg/mtr No

Erection, testing & commissioning of pre-fabricated steel

6.00 Excavation of stay pit in following type of soils, as per

6.02 Soft rock soil where blasting is not required No

6.03 Hard rock soil where blasting is required No

8.02 33 kV Disc insulator with strain hardware (set of 3, 11 KV disc Set

10.00 Paying out, tensioning, binding of conductor and tightening

10.01 6/4.09 + 1/4.09 mm (80 mm² Al. Area) - Racoon km

10.02 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog km

10.03 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther km

Earthing arrangement as per technical specificatons,

Erection of 8 SWG GI wire for earthing and guarding by providing MT

12.00 Erection, Testing and Commissioning of 33 kV AB Switch Set

13.00 Erection of 33 KV LINE FOR UNDER GROUND RAILWAY Set

% discount, if any: __________________

Bidder's Name & Address:

Installation / Erection Charges : All prices in Indian Rupees

B 33/11 KV Grid Substation works

2.00 Earth Filling & Site Levelling

Gravel filling in switchyard area excluding road and

Design, engineering and construction of foundation for

4.01 1.60 MVA without tap changer CMT

4.02 3.15 MVA without tap changer CMT

4.03 5.00 MVA with off load tap changer CMT

4.04 8.00 MVA with off load tap changer CMT

4.05 10.0 MVA with off load tap changer CMT

5.01 33 KV VCB CMT

Providing and Construction of Boundary Wall made of

Design, engineering and construction of Control Room

Design, engineering and construction of cement concrete

Design, engineering and construction of approach road,

11.01 width of approach road 3.75 m R/Mtr

Drilling of tube well bore and installation of submersible

Earth Filling & Site Levelling

Gravel filling in switchyard area excluding road and Sq. m

Design, engineering and construction of Drainage System Mtr

Design, engineering and construction of approach road,

19.01 width of approach road 3.75 m Mtr

19.02 width of footpath 1.5 m Mtr

B (Ib) Substation Electrical works

Erection, filtration, testing and commissioning of 33/11

1.01 1.60 MVA without tap changer No

1.02 3.15 MVA without tap changer No

1.03 5.00 MVA with off load tap changer No

1.04 8.00 MVA with off load tap changer No

1.05 10.0 MVA with off load tap changer No

Providing and Erection, testing & commissioning of ACSR Rabbit Km

Erection, testing and Commissioning of 12 KV, 200 A, 3-pole AB Set

Erection, testing and commissioning of 9 KV,10 KA Distribution

Erection, testing and commissioning of 11 kV, 3-ph, Drop Out fuse

Erection, testing and commissioning of 36kV, 630A, 25kA

Erection, testing and Commissioning of 30kV, 10kA, 1-ph