Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Padfoot

Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 3

STABILITY ANALYSIS FOR 200FT TOWER

TECHNICAL DATA
Max Compression 158.973 kN
Max Uplift 61.936 kN
Max Shear 17.608 kN
No Of Legs 3 nos

DESIGN DATA
Safe Bearing Capacity 100 kN/m2
Density Of Concrete 24 kN/m3
Density Of Soil 17 kN/m3

FOUNDATION PROFILE
Base width 2000 mm
Base height 750 mm
Stump size 750 mm
Stump height
- above ground 150 mm
- below ground 2500 mm

Foundation Weight
Concrete VOLUME(m3) DENSITY(kN/m3) WEIGHT(kN)
- Base 3 24 72
- Stump 1.40625 24 33.75
- Stump above ground 0.084375 24 2.025

Sub - Total 4.490625 107.775

Soil
- Soil above base 8.59375 17 146.0938

Total 13.084375 253.8688

CHECK FOR UPLIFT(SAFETY FACTOR)


FOS 4.09888837

DESIGN CALCULATION BASE ON BS 8110:Part 1 & Part 2


fcu 25 N/mm2
fy 410 N/mm2
Cover 40 mm
Assuming bar size 25 mm
d 697.5 mm
Design Of Shaft
Design for compression and bending
Ultimate moment at shaft due to shear force 46.6612 kN-m
d/h 0.93
M/bh2 0.110604 N/mm2
N/bh 0.282619 N/mm2
Refer Chart No: 24
100ASC/bh 0.4 %
ASC 2250 mm2

PROVIDE Y 25 - 8 nos

3.12.8.11 Lap Length


Minimum lap length 375 mm

3.12.7.1 Lateral Ties


Min diameter of ties 6.25 mm

PROVIDE

Pad Design
Assume bearing capacity 100 kN/mm2
Bending moment developed/meter length 78.125 kNm length
Consider the pad as a beam of width 1 meter & depth 0.6 meter
K 0.00642335
compression reinforcement is/not required

Area of tension reinforcement required


z 662.625

As req 330.536256 mm2/m length


Table 3.27 As min 906.75 mm2/m length

PROVIDE

Anchorage length of bolts


Diameter of anchor bolt 32 mm
Number 4 nos
Force 61.936 kN
Force carried by each bolt 15.484 kN/bolt

3.12.8.3 Ultimate bond stress 2 N/mm2


Anchor length 77.05016 mm
PROVIDE

You might also like