HP P6000 Enterprise Virtual Array Compatibility Reference

1.0 2.0 HP P6000 software solution compatibility HP P6000 Command View interoperability support 2.1 HP P6000 Command View upgrade support 2.2 HP P6000 Command View downgrade support 2.3 HP P6000 Replication Solutions Manager upgrade support 2.4 Active/inactive support for P6000 management/replication software 2.5 Active/inactive support for controller software Controller software version support 3.1.1 Upgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions 3.1.2 Upgrade support for EVA4400 and EVA6400/8400 controller software versions 3.2.1 Downgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions 3.2.2 Downgrade support for EVA4400 and EVA6400/8400 controller software versions 3.3 Data-in-place upgrade support for controllers 3.4 Controller software version support in remote replication environments Controller software and management module software support 3.5 3.6 Management module software compatibility HP P6000 software deployment options 4.1 Supported software on management servers and the management module 4.2 Supported P6000 software operating environments 4.3 HP P6000 Replication Solutions Manager host agent support 4.4 HP P6000 Replication Solutions Manager host agent and HP P6000 DC-Management compatibility 4.5 HP P6000 Dynamic Capacity Management compatibility 4.6 Features supported by HP P6000 Replication Solutions Manager Browser support Features supported by controller software version 6.1 Supported array features by controller software version 6.2 Supported local replication features by controller software version 6.3 Supported remote replication features by controller software version P6000 EVA host connectivity Solid state disk (SSD) support

3.0

4.0

5.0 6.0

7.0 8.0

HP Part Number: 5697-1045 Published: June 2011 Edition: 27

 Copyright 2005-2011 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Acknowledgments Intel and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, and Windows XP are U.S. registered trademarks of Microsoft Corporation. Java is a US trademark of Sun Microsystems, Inc. Oracle is a registered US trademark of Oracle Corporation, Redwood City, California. AMD is a registered trademark of Advanced Micro Devices, Inc. UNIX is a registered trademark of The Open Group.

Introduction
This document contains tables that describe the compatible hardware, operating systems, and software for the following HP P6000 products: HP HP HP HP HP P6000 P6000 P6000 P6000 P6000 Business Copy Command View Continuous Access Replication Solutions Manager Dynamic Capacity Management

IMPORTANT: HP P6000 Command View (formerly HP StorageWorks Command View EVA) supports all HP P6000/Enterprise Virtual Array (EVA) models. General references to HP P6000 Command View may also refer to earlier versions of HP Command View EVA. P6000 is the new branding for the Enterprise Virtual Array product family. How to use this document bullet () = compatibility or support blank = no compatibility or support gray = intersection with the same product black = application does not run in the cited environment NA = combination does not apply Y = Yes N = No

To determine support or compatibility, in a selected table, start from a row in the first column and find its intersection with the appropriate column. The cell content such as a bullet or NA provides the support or compatibility information. For example, to determine which local replication features are supported on the controller software version you are running, use Table 6.2, Supported local replication features by controller software version. Locate a feature, such as, 'Create snapshots in preallocated containers', in the first column ("Feature") and traverse to the intersection of that row with the column that contains the controller software version you are running, such as XCS 6.0xx. Because the cell at the intersection of these two searches contains a bullet (), the controller software version you are using supports this feature. If, however, you are running VCS 4.0xx, the feature is not supported. Footnotes in a continued table may appear on an earlier page.

1.0 HP P6000 software solution compatibility

This table shows the compatibility of the P6000 software solution components. A P6000 software solution is comprised of controller software, management software, replication software, and replication license. See Table 2.0, HP P6000 Command View interoperability, for detailed management software support. This table also shows controller software compatibility for HP EVAInfo and HP P6000 SmartStart. The replication features that are supported with your HP P6000 Business Copy or HP P6000 Continuous Access license depend on the controller software version that is installed on the arrays. See Table 6.2, Supported local replication features by controller software version, and Table 6.3, Supported remote replication features by controller software version, for more information. To determine operating system and connectivity component (such as HBAs and multipathing) support for your P6000 software solution: 1. Use this table (Table 1.0) to identify the VCS or XCS version that is supported with the software solution. 2. See the Enterprise Virtual Array release notes specific to the VCS or XCS version for general operating system support information. 3. See Table 7.0, P6000 EVA host connectivity, for details about locating operating system support information for your array model. P6300/P6500 EVA XCS 10000000 HP P6000 Command View 9.3 9.4

EVA3000/5000

EVA4x00/6x00/8x00

EVA4400/6400/8400

VCS 3.1xx HP RSM 2.1 HP RSM 3.0 HP RSM 3.1 HP RSM 4.0.x HP RSM 5.0 HP RSM 5.1 HP RSM 5.2 HP P6000 RSM 5.3 HP EVAInfo 8.0
1

VCS 4.1xx

XCS 6.1xx

XCS 6.2xx

XCS 095xx000 XCS 10000000

HP EVAInfo 9.01 HP EVAInfo 9.21 HP EVAInfo 9.31 HP EVAInfo 9.41

1

2 2 2 2

HP EVAInfo 8.0 is supported on HP-UX PA-RISC 11.11/11iv1 (64b), HP-UX 11.23 PI/11iv2 (64b PA-RISC, 64b Intel), and HP-UX 11.31/11iv3 (64b PA-RISC, 64b Intel). With EVAInfo 9.x in addition to the HP-UX support, support for Red Hat Enterprise Linux AS & ES 4 Update 6, 7 (x86 32-bit, x64 64-bit, Itanium), Red Hat Enterprise Linux AS & ES 5 Update 3 (x86 32-bit, x64 64-bit, Itanium), SuSE Linux Enterprise Server 10.0 SP1, SP2 (x86, x86_64 32-bit, x64 64-bit, Itanium, and SuSE Linux Enterprise Server 11.0 (x86, x86_64 32-bit, x64 64-bit, Itanium) is added.
2

HP EVAInfo does not support all features on VCS 3.1xx controller software. See the EVAInfo release notes for more information.

2.0 HP P6000 Command View interoperability support

This table lists the controller software and layered applications that are supported with HP P6000 Command View. HP Command View EVA 8.0 includes HP Command View EVAPerf 8.0, SMI-S EVA 8.0, and SSSU 8.0. HP Command View EVA 8.1 includes HP Command View EVA 8.1 only. HP Command View EVA 9.0.1 includes HP Command View EVA 9.0.1 for server-based management and array-based management, HP Command View EVAPerf 9.0, SMI-S EVA 9.0, and SSSU 9.0. HP Command View EVA 9.1 includes HP Command View EVA 9.1 for server-based management and array-based management, HP Command View EVAPerf 9.1, SMI-S EVA 9.1, and SSSU 9.1. HP Command View EVA 9.2 includes HP Command View EVA 9.2 for server-based management and array-based management, HP Command View EVAPerf 9.2, SMI-S EVA 9.2, and SSSU 9.2. HP Command View EVA 9.2.1 includes HP Command View EVA 9.2.1 for server-based management and array-based management, HP Command View EVAPerf 9.2, SMI-S EVA 9.2, and SSSU 9.2. HP Command View EVA 9.3 includes HP Command EVA View 9.3 for server-based management and array-based management, HP Command View EVAPerf 9.3, SMI-S EVA 9.3, and SSSU 9.3. HP P6000 Command View 9.4 includes HP P6000 Command View 9.4 for server-based management and array-based management, HP Command View EVAPerf 9.4, SMI-S EVA 9.4, and SSSU 9.4. NOTE: HP Command View EVA 9.0.1 replaced 9.0. All support information that was previously listed for HP Command View EVA 9.0 in this table was applied to 9.0.1. HP P6000 Command View 8.0 Controller software
3

8.0.1 5

8.0.2 5

8.11

9.0.1 5

9.1 5

9.22 5

9.2.12 5

9.34 5

9.44 5

VCS 3.1xx VCS 4.1xx XCS 6.1xx XCS 6.200, 6.220 XCS 6.240 XCS 09000000/09001000 XCS 09003000 XCS 09004000 XCS 09006000 XCS 09501x00 XCS 0952x000 XCS 0953x000 XCS 10000000 SAN applications HP Application Recovery Manager 6.1 HP Configuration Collector 1.2.4 HP Command View for Tape Libraries 1.8b7 HP Command View for Tape Libraries 2.27 HP Command View for Tape Libraries 2.3.27 HP Command View for Tape Libraries 2.5 HP Command View for Tape Libraries 2.6x HP Command View for Tape Libraries 2.7 HP Command View for Tape Libraries 2.8 HP P9000 Performance Advisor 2.2B
8, 9

7 7 7 7 7 7 7 7 7

HP P9000 Performance Advisor 3.58, 9 HP P9000 Performance Advisor 4.58, 9 HP P9000 Performance Advisor 4.68,9 HP P9000 Performance Advisor 5.08,9 HP P9000 Performance Advisor 5.1 HP P9000 Performance Advisor 5.2 HP Command View XP AE 5.88
1 2 3

The release of HP Command View EVA 8.1 is specifically for the installation of the software on the EVA4400 management module. See the HP Command View EVA 8.1 release notes for details. Communication between layered applications and HP Command View EVA 9.2 is not supported when HP Command View EVA 9.2 is running on a VMware virtual machine.

Where an HP P6000 Command View version (or HP P6000 Replication Solutions Manager) is not supported with a particular XCS version, the HP P6000 Command View version (or HP P6000 Replication Solutions Manager) is supported for the purposes of upgrading to the latest XCS version. For example, you are currently running XCS 09001000 and want to upgrade to XCS 09522000. Although XCS 09001000 is not supported with HP Command View EVA 9.1, you can upgrade to version 9.1 while the array is running XCS 09001000 and then upgrade to XCS 0952x000.
4 5 6

When HP P6000 Command View is running on a VMware virtual machine, communication between layered applications and HP P6000 Command View EVA or later is supported if VMDirectPath is enabled. HP recommends that you upgrade to XCS 6.2xx if you are using HP Command View EVA 8.0.1 or later. Requires the following patches when installed with HP P6000 Command View 8.0.2: APPRMWIN_00015/PHSS_39302/PHSS_39303, APPRMWIN_00017/PHSS_39306/PHSS_39307,

APPRMWIN_00016/PHSS_39304/PHSS_39305, APPRMWIN_00018/PHSS_39308/PHSS_39309.
7

HP P6000 Command View and HP Command View for Tape Libraries may coexist on the same server. However, a single instance of SMI-S CIMOM is available for both the P6000 and Tape providers. See the HP P6000 Command View Release Notes for installation sequencing of HP P6000 Command View, HP Command View for Tape Libraries, and HP P6000 Replication Solutions Manager.
8 9

HP P6000 Command View and HP Command View XP and/or HP Command View XP AE may coexist on the same server. HP P6000 Command View and HP 9000 Performance Advisor management and host agent software co-existence is not supported.

2.0 HP P6000 Command View interoperability support (cont'd)

HP P6000 Command View 8.0 SAN applications (cont'd) HP Command View XP AE 5.98 HP Command View XP AE 6.1
8

8.0.1

8.0.2

8.1

9.0.1

9.1

9.2

9.2.1

9.3

9.4

HP Command View XP AE 6.28 HP Command View XP AE 6.38 HP Command View XP AE 6.48 HP Command View XP AE 7.08 HP Cluster Extension for Linux 2.00.00 (x86, x64, Itanium) HP Cluster Extension for Linux 3.00.00 (x86, x64, Itanium) HP Cluster Extension for Windows 2.01.00 (x86, x64, Itanium) HP Cluster Extension for Windows 3.00.00 (x86, x64, Itanium) HP Cluster Extension for Windows 4.00.00 (x86, x64, Itanium) HP HP HP HP HP EVA Storage Virtualization Adapter for VMware Site Recovery Manager 4.01.00 Insight Dynamics/Matrix OE 6.0 Insight Dynamics/Matrix OE 6.1 Insight Dynamics/Matrix OE 6.2 Insight Dynamics/Matrix OE 6.3 10

10 10 10 10 10
10

10 10 10 10 10 10 10 10 10 10

10 10 10 10 10 10 10 10 10 10
10

10 10 10 10 10 10 10 10
10

10 10, 11

HP Insight Remote Support Advanced software12 HP Insight Remote Support Standard software13 HP Metrocluster A.03.00 HP Metrocluster A.04.00 HP Metrocluster A.05.00 HP Metrocluster A.05.01 HP Navigator 3.0 through 4.1 HP Navigator 4.3 or later HP Remote Support Configuration Collector HP Data Protector software 6.015 HP Data Protector software 6.1.1 HP HP HP HP Data Protector software 6.2 SmartStart EVA Storage 3.2 SmartStart EVA Storage 3.3 P6000 SmartStart 3.4
15 15

10 10 10 10 10 10
10

10 10 10 10 14 14 14 16 10 10,17 10,17

10 10
10

10
14

HP Storage Essentials Enterprise Edition 5.1 SP4 (Windows/Linux)19 HP Storage Essentials Standard Edition 5.1 SP4 (Windows)18 HP Storage Essentials Standard Edition 5.1 SP5 (Windows)
10 18

14

Only supported on the server-based management version of HP P6000 Command View.

11 When HP P6000 Command View is running on a virtual machine, the default cluster timeout setting (180 seconds) for HP Cluster Extension may be too short to allow all management commands to complete, which can lead to failure of Cluster Extension operations. Increase the timeout setting in the Microsoft Cluster software to 300 seconds or more to resolve the problem. 12 13 14 15

HP recommends that you always install and use the latest version of HP Insight Remote Support Advanced software. Can coexist on the same platform with HP Command View EVA 8.0.1 or later. HP recommends that you always install and use the latest version of HP Insight Remote Support Standard software. Can coexist on the same platform with HP Command View EVA 8.0.1 or later. This combination of applications is not supported on an EVA4400.

This compatibility reference applies only to HP Data Protector customers who use either the Zero Downtime Backup and Instant Recovery for EVA integration or Microsoft Volume Shadow Copy Services for P6000/EVA-based backups. It does not restrict HP P6000 Command View EVA and HP Data Protector deployments where these components are not used.
16 17 18 19

Requires patches DPWIN_00378, PHSS_38030, PHSS_38031, DPLNX_00052, and DPSOL_00338, or superseding patches. Fully allocated snapshots are supported only if snapshot rotation is set to 1. Supported via a provider included with HP Storage Essentials. HP SMI-S EVA is not supported. Provisioning via the HP Storage Essentials user interface is not supported. Supported via a provider included with HP Storage Essentials. HP SMI-S EVA is not supported but will coexist. Provisioning via the HP Storage Essentials user interface (GUI/CLI) is supported.

2.0 HP P6000 Command View interoperability support

HP P6000 Command View 8.0 SAN applications (cont'd) HP Storage Essentials Enterprise Edition 6.0 SP1 (Windows/Linux)19 HP Storage Essentials Enterprise Edition 6.0 SP2 (Windows/Linux)19 HP Storage Essentials Enterprise Edition 6.0 SP3 (Windows/Linux)19,20 HP Storage Essentials Enterprise Edition 6.0 SP4 (Windows/Linux)19,20 HP Storage Essentials Standard Edition 6.0 SP1 (Windows/Linux)18 HP Storage Essentials Standard Edition 6.0 SP2 (Windows/Linux)18 HP Storage Essentials Standard Edition 6.0 SP3 (Windows/Linux)18,20 HP Storage Essentials Standard Edition 6.0 SP4 (Windows/Linux) HP Storage Essentials 6.1 (Windows/Linux)
21 21 18,20

8.0.1

8.0.2

8.11

9.0.1

9.1

9.22

9.2.12

9.34

9.44

10

10 10 10
10

22
22

22
22

22 22 22 22
22

HP Storage Essentials 6.1 SP1 (Windows/Linux) HP Storage Essentials 6.2 (Windows/Linux)

21

10 10
10

22 22
22

22 22
22

HP Storage Essentials 6.2 SP1 (Windows/Linux)21 HP Storage Essentials 6.3 (Windows/Linux)21 HP Storage Essentials 9.4 (Windows/Linux)21 HP Storage Provisioning Manager 1.0 (used with HP Insight Dynamics/Matrix OE 6.0) HP Storage Provisioning Manager 1.1 (used with HP Insight Dynamics/Matrix OE 6.1) HP Storage Provisioning Manager 1.2 (used with HP Insight Dynamics/Matrix OE 6.2) HP Storage Provisioning Manager 1.3 (used with HP Insight Dynamics/Matrix OE 6.3) HP Systems Insight Manager 5.1 or 5.1 SP1 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 5.2 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 5.3 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 5.3.1 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 6.0 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 6.1 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 6.2 (with HP Insight Remote Support Advanced software) HP Systems Insight Manager 6.3 (with HP Insight Remote Support Advanced software) HP VDS/VSS Hardware Provider 4.0x.00 HP VDS/VSS Hardware Provider 5.0x.00 HP VDS/VSS Hardware Provider 6.0x.00 HP WEBES25 iSCSI connectivity26 mpx100 firmware 2.4.x.x mpx100b firmware 2.4.x.x27 MPX200 firmware 3.02x, 3.1x, 3.2.x.x, 3.3.x.x MPX200 firmware 3.2.2x28, 3.3.0.2 P6300/P6500 EVA iSCSI module firmware 3.0.4.1 P6300/P6500 EVA iSCSI/FCoE module firmware 3.2.2.6
20 21 22 23 24 25 26 27 28

22 22 22 22 22

10

22

22

22

23 23 24
24

10,24

24
24

24
24

24 24 24 24 24 24 24 24 24 24 24

24 24 24 10

24 24 24 24

Supported on EVA3000/5000, EVA4000/6000/8000, EVA4100/6100/8100, and EVA4400 with Vraid0, Vraid1, and Vraid5 virtual disks. Supported on EVA3000/5000, EVA4000/6000/8000, EVA4100/6100/8100, EVA4400, EVA6400/8400, and P6300/P6500 EVA with Vraid0, Vraid1, and Vraid5 virtual disks. HP Storage Essentials Performance Pack is not supported when HP P6000 Command View is running on a VMware virtual machine. Supported on the same server as HP Systems Insight Manager 5.2 as long as the server is running HP P6000 Command View 8.0.1 or 8.0.2. Supported on the same server as HP Systems Insight Manger 5.3 or later as long as the server is running HP P6000 Command View 8.0.2 or 9.0.1 or later (server-based management only). This represents WEBES as a standalone product. HP recommends that you always install and use the latest version of WEBES. See the Single Point of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock) for the latest supported mpx firmware versions and MPIO versions. The mpx100b is supported on the EVA4400 only. If you are using FCoE, this MPX200 firmware version is the minimum required version.

2.1 HP P6000 Command View upgrade support

This table shows upgrade support for HP P6000 Command View versions. A bullet () indicates you can perform an upgrade from the version in the FROM column to the version in the TO column without removing the earlier version. A blank cell (or if an HP P6000 Command View version is not listed) indicates an upgrade to a later version (without removing the earlier version) is not supported. For unsupported upgrade paths, you must remove the previous version using Windows Add/Remove Programs, reboot the management server, and install the applicable version listed below. NOTE: For supported upgrade paths, it is possible that a reboot may occur automatically during the upgrade. TO HP P6000 Command View version FROM HP P6000 Command View version 8.0 8.0.1 8.0.2 9.0 9.0.1 9.1 9.2 9.2.1 9.3 9.4
1 1

8.0

8.0.1

8.0.2

9.0

9.0.1

9.1

9.2

9.2.1

9.3

9.4

You must have 9.2 installed before you can upgrade to 9.2.1.

2.2 HP P6000 Command View downgrade support

This table shows downgrade support for HP P6000 Command View versions. A bullet () indicates you can perform a downgrade from the version in the FROM column to the version in the TO column. A blank cell indicates a downgrade is not supported. See the HP P6000 Command View Installation Guide for instructions on downgrading to earlier versions. TO HP P6000 Command View version FROM HP P6000 Command View version 8.0 8.0.1 8.0.2 9.0 9.0.1 9.1 9.2 9.2.1 9.3 9.4 8.0 8.0.1 8.0.2 9.0 9.0.1 9.1 9.2 9.2.1 9.3 9.4

2.3 HP P6000 Replication Solutions Manager upgrade support

This table shows upgrade support for HP P6000 Replication Solutions Manager server and host agent software versions. A bullet () indicates you can perform an upgrade from the version in the FROM column to the version in the TO column without removing the earlier version. A blank cell (or if an HP P6000 Replication Solutions Manager version is not listed) indicates an upgrade to a later version (without removing the earlier version) is not supported. TO HP P6000 RSM server version FROM HP P6000 RSM server version 3.0 3.1 4.0 4.0.1 5.0 5.1 5.2 5.3 3.0 3.1 4.0 4.0.1 5.0 5.1 5.2 5.3

FROM this HP P6000 RSM host agent version TO version 5.3 WITH operating system HP HP-UX HP OpenVMS HP Tru64 UNIX IBM AIX Linux (Red Hat and SuSE) Microsoft Windows Sun Solaris Sun Solaris (x86) VMware guest OS
1 1

3.0

3.1

4.0

4.0.1

5.0

5.1

5.2

Upgrading is not supported on a Linux Itanium server. You must remove the previous version first and then install the new version.
10

2.4 Active/inactive support for P6000 management and replication software

This table identifies which versions of P6000 management and replication software are active and inactive. Because the active/inactive designations become effective in November 2009, there are multiple versions that list the same inactive date. Active and inactive are defined as: Active: An active version has full Engineering support. Issues are addressed and patches can be provided. Inactive: An inactive version has limited Engineering support. Customers will be requested to move to an active version. Engineering is available for consultation but lab resources are not available to address issues. The escalation path for an issue on an inactive version is limited. The oldest active software version goes inactive approximately six months after a new version is released. For example, if the current active versions are 8.0, 9.0.1, and 9.1, 8.0 goes inactive six months after 9.1 is released. NOTE: When a version of HP P6000 Command View goes inactive, the same version of HP Command View EVAPerf, HP Storage System Scripting Utility, and HP SMI-S EVA also goes inactive. Software Active As Of Inactive As Of 30 Nov 2009 30 Nov 2009 30 Nov 2009 30 Nov 2009 30 Nov 2009 30 Nov 2009 6 June 2011 6 June 2011 HP P6000 Command View 7.0. 7.0.1 8.0 8.0.1 8.0.2 8.1 9.0.1 9.1 9.2 16 Feb 2010 9.2.1 15 June 2010 9.3 16 Aug 2010 9.4 6 June 2011 HP P6000 Replication Solutions Manager 2.0 2.1 3.0 3.1 4.0 4.0.1 5.0 5.1 16 Feb 2010 5.2 16 Aug 2010 5.3 6 June 2011 HP P6000 SmartStart 1.0 2.0 2.1 3.0.1 3.1 3.2 16 Feb 2010 3.3 16 Aug 2010 3.4 6 June 2011

30 Nov 2009 30 Nov 2009 30 Nov 2009 30 Nov 2009 30 Nov 2009 16 Feb 2010 6 June 2011

30 Nov 2009 30 Nov 2009 30 Nov 2009 6 June 2011 6 June 2011

11

2.5 Active/inactive support for controller software

This table identifies which versions of controller software are active and inactive. Active and inactive are defined as: Active: An active version has full Engineering support. Issues are addressed and patches can be provided. Inactive: An inactive version has limited Engineering support. Customers will be requested to move to an active version. Engineering is available for consultation but lab resources are not available to address issues. The escalation path for an issue on an inactive version is limited. The oldest active software version goes inactive approximately six months after a new version is released. For example, if the current active versions are 09520000, 09521000, and 09522000, 09520000 goes inactive six months after 09534000 is released. Controller Software EVA3000/5000 3.028 3.110 4.100 EVA4000/6000/8000 and 4100/6100/8100 5.100 (without HP P6000 Continuous Access) 5.100 (with HP P6000 Continuous Access) 5.110 (without HP P6000 Continuous Access) 5.110 (with HP P6000 Continuous Access) 6.000 6.100 6.110 6.200 6.220 6.240 EVA4400 09000000 09001000 09003000 09004000 09006000 EVA4400 and 6400/8400 09500000 09501000 09501100 09520000 09521000 09522000 09534000 10000000 P6300/P6500 EVA 10000000 Active As Of Inactive As Of 31 Mar 2008 21 May 2007 15 Nov 2007 31 Dec 2007 30 Sep 2008 31 Dec 2007 31 Oct 2008 31 Dec 2007 31 Aug 2009 31 Aug 2009 26 May 2008 20 Mar 2009 7 Mar 2011 31 Oct 2008 31 Jan 2009 31 Mar 2009 31 Oct 2009 31 Jan 2010 5 Mar 2009 31 Jan 2010 31 Jan 2010 13 Jul 2009 7 Aug 2009 19 Aug 2009 15 Jun 2010 6 June 2011 6 June 2011
12

3.0 Controller software version support 3.1.1 Upgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions
Thie table shows upgrade support for the controller software versions. A bullet () indicates you can perform an upgrade from the version in the FROM column to the version in the TO column. A blank cell indicates an upgrade is not supported. TO controller software version VCS 3.1xx FROM controller software version VCS 3.1xx VCS 4.1xx XCS 5.1xx XCS 6.1xx XCS 6.2xx
1 2

VCS 4.1xx 1 1

XCS 6.1xx

XCS 6.2xx

2 2 2 2

An offline upgrade is required.

An online upgrade is supported. See the Updating Product Software Guide (for the applicable array model and controller software version) for additional guidelines and procedures.

13

3.0 Controller software version support 3.1.2 Upgrade support for EVA4400 and EVA6400/8400 controller software versions
This table shows upgrade support for the controller software versions. A bullet () indicates you can perform an upgrade from the version in the FROM column to the version in the TO column. A blank cell indicates an upgrade is not supported. HP always recommends upgrading to the latest version supported for your array model. TO controller software version XCS 0953x000 (EVA4400) FROM controller software version XCS 09000000/09001000 XCS 09003000 XCS 09004000 XCS 09006000 XCS 09501x00 (EVA4400) XCS 09501x00 (EVA6400/8400) XCS 0952x000 (EVA4400) XCS 09522000 (EVA4400) XCS 0952x000 (EVA6400/8400) XCS 09522000 (EVA6400/8400) XCS 0953x000 (EVA4400) XCS 09534000 (EVA4400) XCS 0953x000 (EVA6400/8400) XCS 09534000 (EVA6400/8400)
1 2

XCS 0953x000 (EVA6400/8400)

XCS 10000000 (EVA4400)

XCS 10000000 (EVA6400/8400)

1 1 1 1 2 2 2 2 2 2 2 2 2 2

An offline upgrade is required.

An online upgrade is supported. See the Updating Product Software Guide (for the applicable array model and controller software version) for additional guidelines and procedures.

14

3.2.1 Downgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions
This table shows downgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions. A bullet () indicates you can downgrade from the version in the FROM column to the version in the TO column. A blank cell indicates a downgrade is not supported. NOTE: If you are running XCS 6.110 on an EVA4100/6100/8100, you cannot downgrade to XCS 6.100 or earlier versions. TO controller software version VCS 3.1xx FROM controller software version VCS 3.1xx VCS 4.1xx XCS 6.1xx XCS 6.2xx
1 2 3

VCS 4.1xx

XCS 6.1xx

XCS 6.2xx

1 2 2 2 2 3

An offline downgrade is required. An array initialization is required, which results in data loss or a restore. An online downgrade is supported.

15

3.2.2 Downgrade support for EVA4400 and EVA6400/8400 controller software versions
This table shows downgrade support for the EVA4400 and EVA6400/8400 controller software versions. A bullet () indicates you can downgrade from the version in the FROM column to the version in the TO column. A blank cell indicates a downgrade is not supported. NOTES: If the EVA4400 controller contains cache DIMMs with either standard part number 2660-0281 or spare part number 587246-001 (or the controller has a label with Min FW 09522000 affixed to it), you cannot downgrade from XCS 09522000. HP recommends only downgrading to XCS 09534000. Downgrading to a controller software version not listed in Table 3.2.2 may require an array initialization. Contact HP for recommendations and procedures for downgrading. TO controller software version XCS 09534000 (EVA4400) FROM controller software version XCS 10000000 (EVA4400) XCS 10000000 (EVA6400/8400)
1 2

XCS 09534000 (EVA6400/8400)

XCS 10000000 (EVA4400)

XCS 10000000 (EVA6400/8400)

1 1

An offline downgrade with an array initialization is required. The array initialization results in data loss or a restore. An online downgrade is supported.

16

3.3 Data-in-place (hardware) upgrade support for EVA controllers

This table shows data-in-place upgrade support for when you upgrade the hardware. A bullet () indicates you can perform a data-in-place upgrade from the array controller in the FROM column to the array controller in the TO column. A blank cell indicates a data-in-place upgrade is not supported. NOTE: When doing a data-in-place upgrade, the old and new controllers must be running the same version of controller software. A data-in-place upgrade must be performed offline. TO array controller EVA3000 (HSV100) FROM array controller EVA3000 (HSV100) EVA5000 (HSV110) EVA4000/6000 (HSV200) EVA4100/6100 (HSV200-A) EVA8000 (HSV210) EVA8100 (HSV210-A) EVA4400 (HSV300) EVA4400 (HSV300-S) EVA6400 (HSV400) EVA8400 (HSV450) P6300 EVA (HSV340) P6500 EVA (HSV360)
1 2

EVA5000 (HSV110)

EVA4100/6100 (HSV200-A)

EVA8100 (HVS210-A)

EVA4400 (HSV300)

EVA4400 (HSV300-S)

EVA6400 (HSV400)

EVA8400 (HSV450)1

P6300 EVA (HSV340)2

P6500 EVA (HSV360)2

Includes EVA8400 HSV450 controller variations (14 GB cache and 22 GB cache). Includes FC, iSCSI, and iSCSI/FCoE controller variations.

17

3.4 Remote replication support for controller software versions (server-based management only)
This table shows support between controller software versions in remote replication environments, meaning the controller software versions that are running on the source and destination arrays. A bullet () indicates support when the source and destination arrays are running the controller software versions listed. A blank cell indicates replication between the controller software versions is not supported. Controller software version (destination array) VCS 3.1xx Controller software version (source array) VCS 3.1xx VCS 4.1xx XCS 6.1xx XCS 6.2xx XCS 09004000 XCS 09006000 XCS 09501x00 (EVAx400) XCS 0952x000 (EVAx400) XCS 0953x000 (EVAx400) XCS 10000000 (EVAx400) XCS 10000000 (P6300/P6500 EVA)
1

VCS 4.1xx

XCS 6.1xx

2,3

XCS 6.2xx

XCS 0952x000 (EVAx400)

XCS 0953x000 (EVAx400)

XCS 10000000 (EVAx400)

XCS 10000000 (P6300/P6500 EVA)

4 1,4 5 4

1,4 4 5 4

5 5 6 1,6
6,7

4 4 1,6 6
6

8 8 6,7 6
1,6

9 9 6,7 6

9 9 6,7 6

6,7 6
1,6

6,7 6,7 6,7 6,7 6,7 6,7

6 6 6 6 6 6

1,6 6 6 6 6,8 6,8

1,6 6 6 6,9 6,8,10 6,8,10 6,8 6,8,10 10,11 10,11 6,8 6,8,10 10,11 10,11

Supported during the 60 day upgrade window only, meaning the source and destination arrays can be running these different controller software versions while you are upgrading the arrays and the upgrades must be completed within 60 days. The upgrade window begins with the upgrade of the first array. It concludes when all arrays in a direct or indirect replication relationship with the first array have been upgraded. You can only upgrade one controller software family (either VCS or XCS) at a time and only allow two versions within that family. During the upgrade window, do not make changes to DR groups (adding/delete DR groups or adding/deleting members of DR groups).
2

Before upgrading your storage system to XCS 6.xxx firmware, all source and destination DR groups must be in Synchronous mode. Check each DR group to verify this setting, before proceeding with the firmware upgrade process. Enhanced asynchronous replication is only available when both arrays are running XCS 6.000 or later. Asynchronous replication in XCS 6.000 or later (not including 6.200) is not compatible with asynchronous replication in earlier versions of controller software (XCS 5.1xx or earlier, VCS).
3 4 5 6 7 8 9

When this version of XCS is running on either the source or destination array, asynchronous write mode is not available when creating a DR group. Asynchronous write mode is available only after the DR group is created. Synchronous and standard asynchronous replication is supported between these controller software versions. Asynchronous replication is not supported between these controller software versions. Only synchronous replication is supported. Synchronous and enhanced asynchronous replication is supported between these controller software versions. Supported as long as the controller software on the HSV200-x/HSV210-x controller is upgraded to XCS 6.2xx within 60 days. Supported as long as the controller software on the EVAx400 controller is upgraded to XCS 1000000 within 60 days. The following restrictions apply: a) Replication from EVA3000/5000 to EVA4400, EVA6400, EVA8400, P6300 EVA, or P6500 EVA: 1) Do not initiate a DR group failover from the EVA3000 or EVA5000 to the EVA4400, EVA6400, EVA8400, P6300 EVA, or P6500 EVA; it will result in data unavailability 2) After normalization (full copy) has completed, perform the following steps to move data access to the EVA4400, EVA6400, EVA8400, P6300 EVA, or P6500 EVA: Halt access to EVA3000 or EVA5000 DR group members. Unpresent virtual disk(s) on the EVA3000 or EVA5000. Delete the DR group. Present the EVA4400, EVA6400, EVA8400, P6300 EVA, or P6500 EVA virtual disks to the servers. Rescan and mount the new virtual disks on the servers, if applicable. b) Synchronous write mode only c) Supported on VCS 3.1xx only if the EVAx400 target array (running XCS 0953x000) does not have DR groups with another EVA model during the data migration NOTE: There is an optional configuration to work around the restriction in 9c. (all other restrictions from footnote 8 still apply) when an EVA6400 or EVA8400 is the target EVA. If there is an absolute need for the target EVA6400/8400 to participate in additional HP P6000 Continuous Access relationships (besides the relationship with the EVA3000/5000), the host ports used on the target array by the EVA3000/5000 must be isolated from other HP P6000 Continuous Access relationships. You can accomplish this by zoning (or using separate fabrics), where host ports 1 and 2 for the EVA6400/EVA8400 are only accessible by the EVA3000/5000 and host ports 3 and 4 are available for other HP P6000 Continuous Access relationships. Not adhering to this restriction can lead to unexpected and undesired behavior. If an EVA4400, P6300 EVA, or P65000 EVA is the target array, you must follow the restriction listed in 8c. and limit the relationship to just the migration relationship from the EVA3000/5000 to the EVA4400, P6300 EVA, or P6500 EVA. d) Supported on VCS 4.1xx; all restrictions except c apply e) Fibre Channel connectivity supported (no long distance support) f) The 60 day upgrade window applies, no permanent relationships are supported

10 11

Replication between these versions supports the HP SCSI FC Compliant Data Replication Protocol. For configuration requirements, see the HP P6000 Continuous Access Implementation Guide . Synchronous, enhanced and basic asynchronous replication is supported between these controller software versions.

18

3.5 Controller software and management module software support

This table shows support between controller software and management module software. A bullet () indicates support; a blank cell indicates no support. The management module is applicable to the EVA4400 and P6300/P6500 EVA only. Controller software Management module software1 0001.0000 0001.0020 0001.1000 0001.2000 0001.2010 0001.3000 0001.4000 0001.4100 0001.4200 0001.4300
1

09000000 09001000 09003000 09004000 09006000 09501x00 0952x000 0953x000 10000000 2 2

2

2 1 2
2

2
2

2 2 2 2 2 2

Where a management module software version is not supported with a particular XCS version, the management module software version is supported for the purposes of upgrading to the latest XCS version. For example, you are currently running XCS 09001000 and want to upgrade to XCS 09522000. Although XCS 09001000 is not supported with management module software version 0001.3000, you can upgrade to version 0001.3000 while the array is running XCS 09001000 and then upgrade to XCS 09522000. Installing HP Command View EVA 8.1 or later will automatically install management module software 0001.1000 or later.

19

3.6 Management module software compatibility

This table shows how the management module software is compatible with HP P6000 Command View and the HP P6000 Web-based Operator Control Panel. Management module software 0001.0000 0001.0020 0001.1000 0001.2000 0001.2010 0001.3000 0001.4000 0001.4100 0001.4200 0001.4300 8.1 HP P6000 Command View 9.0.1 9.1 9.2.x 9.3 9.4 1.0 2.1 HP P6000 WOCP 2.2 2.3 2.3.1 2.4

20

4.0 HP P6000 software deployment options

For server-based management, you can install HP P6000 management and replication software on a management server. The management servers are: General-purpose server: A server that runs customer applications, such as file and print services Dedicated management server: A Windows host that is intended solely for HP storage software, such as HP OpenView Storage Node Manager, HP OpenView Storage Area Manager add-on software modules, or HP P6000 software HP X1000/X3000 Network Storage Systems and Gateways: A server similar to the general-purpose server; it can be used for managing EVAs in the SAN as well as traditional NAS-based applications. For array-based management (EVA4400, P6300/P6500 EVA only), you can install HP P6000 Command View on the management module within the controller enclosure. The server you use to browse to HP P6000 Command View on the managment module can be any server running any operating system and meets the browser requirements listed in Table 5.0, Browser support. All other applications require a separate server. See the installation guide for the appropriate application for more information. Required hardware x86 and x64 architectures are supported1 Processor: 1.26 GHz (minimum), dual-processor or dual-core 1.86 GHz (recommended)2,3 Memory: 2 GB (minimum), 4 GB (recommended)2,3 Disk space requirements: 200 MB for HP P6000 Command View installation 2 GB for HP P6000 Command View log files (During heavy management command activity, the required space for logs may increase sharply in a 72-hour period.) 10 MB for each managed array 550 MB for HP P6000 Replication Solutions Manager installation Additional 300400 MB for HP P6000 Replication Solutions Manager installation to accommodate log and database growth 10/100 Mbps for HP P6000 RSM server to HP P6000 RSM host agent connectivity NOTE: HP P6000 Command View and HP P6000 Replication Solutions Manager are supported on any server (including blade servers) as long as the server meets the minimum configuration requirements for a general purpose server as noted above. HP X1400 G2 Network Storage System HP X1800 G2 Network Storage System HP X1800sb G2 Network Storage Blade HP X3400 G2 Network Storage Gateway HP StorageWorks X3400 Network Storage System HP X3800 G2 Network Storage Gateway HP X3800sb G2 Network Storage Blade HP ProLiant DL380 G5 x64 SAN Storage Server HP ProLiant DL380 G5 Base Storage Server Note: In most configurations, the X3400 Network Storage System is preferred. The X3800 or X1800 Network Storage System or Gateway is recommended when HP P6000 Command View and HP Insight Remote Support are installed on the same server. For more information about the X3800 or X1800 Network Storage System or Gateway, go to the following websites: X3800: http://www.hp.com/go/X3000-G2 X1800: http://www.hp.com/go/X1000-G2 Processor: 1260 MHz reserved (minimum), 3000 MHz reserved (recommended) Memory: 2096 MB reserved (minimum), 4192 MB reserved (recommended) Server hardware requirement: VMDirectPath supports a direct device connection for virtual machines running on Intel Xeon 5500 systems, which feature an implementation of the I/O memory management unit (IOMMU) called Virtual Technology for Directed I/O (VTd). If you are using VMDirectPath, the VMware virtual machine must be an HP ProLiant G6 (or later) server, which supports VT-d. For HBA support with VMDirectPath, see the Single Point of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock).

General-purpose server Dedicated management server

HP X1000/X3000 Network Storage Systems and Gateways

VMware virtual machine (where HP P6000 Command View is installed on a Windows guest operating system)4
1 2 3

These are minimum requirements. As the number of arrays and objects on the arrays increases, HP recommends that the management server upgraded to a higher-end machine. A minimum of a dual-processor or dual-core 1.86 GHz Intel Xeon Processor (or AMD equivalent) and 2 GB memory is recommended if you are managing 4 or more arrays.

A minimum of a dual-processor or dual-core 1.86 GHz Intel Xeon Processor (or AMD equivalent) and 4 GB memory is recommended if HP P6000 Replication Solutions Manager, HP Cluster Extension, HP Metrocluster, HP Insight Remote Support Advanced, HP Storage Storage Essentials, HP Data Protector, or HP Systems Insight Manager are in the configuration. The X3800 and X1800 Network Storage Systems and Gateways are not supported for a VMware virtual machine. If you require a server to host VMware, HP Insight Remote Support, and HP P6000 Command View, select the DL380 with a minimum of 6 GB of memory and a 2.5 MHz processor.

21

4.1 Supported software on management servers and the management module

This table lists the software that is supported on each management server and the management module. Although multiple software products are compatible with a management server, these software products may not be compatible with each other. General-purpose server HP P6000 Command View HP P6000 Command View and HP P9000 Command View and/or HP P9000 Command View AE coexistence on same Windows server HP Command View for Tape Libraries and HP P6000 Command View software coexistence HP Insight Remote Support software HP P6000 Replication Solutions Manager HP Storage Essentials4 Microsoft Operations Manager support (MOM)5 HP Management Pack for Systems Center Operations Manager 2007 Number of HP Enterprise Virtual Arrays supported
2 3

Dedicated management server

2

HP X1000/X3000 Network Storage Systems and Gateways1 2

Management module

16 6

16 6 NA

16 6

Number of SAN islands supported (managing multiple SANs) Operating system connectivity 3.0e and later OR Storport Driver

Operating systems

Microsoft Windows Server 2003 Standard and Enterprise SP1/SP2/R2 (x86 32-bit or x64 64-bit); Microsoft Windows Server 2008 Standard and Enterprise SP1/SP2/R2 (x86 32-bit or x64 64-bit)

Microsoft Windows Storage Server 2008 Standard SP2/R2 (x64) (X1800), Microsoft Microsoft Windows Server 2003 Standard Windows Storage Server 2008 Enterprise and Enterprise SP1/SP2/R2 (x86 32-bit or SP2/R2 (x64) (X3400, X3800), Microsoft x64 64-bit); Microsoft Windows Server Windows Storage Server 2003 Standard R2 2008 Standard and Enterprise (x64 64-bit) (DL380 base), or Microsoft SP1/SP2/R2 (x86 32-bit or x64 64-bit) Windows Unified Data Storage Server 2003 Enterprise (x64 64-bit) (DL380 x64)6

WEBES (HP Services obligation required)

1 2

Microsoft Windows 2000 is no longer supported on the HP X3000 Network Storage Gateways. When calling for support, customers may be asked to upgrade to later versions to take advantage of specific quality improvements.

HP recommends a maximum of eight EVAs per HP P6000 Command View 9.2 or later instance. When running HP P6000 Command View 9.1 or earlier, the recommended maximum is four. This recommendation applies to all management server types. Do not install HP Command View SDM 1.09 and HP P6000 Replication Solutions Manager 1.1 or 1.2 on the same management server. Do not install HP P9000 Command View and HP P6000 Replication Solutions Manager on the same management server. A dedicated management server is required for HP Storage Essentials. Do not install HP P6000 Command View and HP Storage Essentials on the same server. Supported with HP Management Pack for MOM 2007. Microsoft Storage Server 2008 Standard and Enterprise are now supported and licensed operating systems for a central management server or hosting device with HP Insight Remote Suport A.05.50. There are no unique issues

4 5 6

identified with using these operating systems. Follow the recommendations and notes applicable to implementing HP Insight Remote Support Advanced and Standard editions on the Microsoft Server 2008 R2 platform.

22

4.2 Supported P6000 software operating environments

This table lists the supported servers, operating systems and application integration for P6000 software. A bullet () indicates support on all P6000 EVA models, a specific model number indicates support with that model only, and a blank cell indicates no support. The environments are: HP P6000 Business Copy Basic I/OThe ability for HP P6000 Business Copy to work with an operating system or application is determined by the operating system support documents posted on the Single Point of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock). (To enable SPOCK access, you must sign up for an HP Passport.) If an operating system is supported with a particular P6000 EVA model and controller software version, then HP P6000 Business Copy is supported with that operating system. There may or may not be support through HP P6000 RSM on that operating system, as indicated in this table. HP P6000 Continuous Access Basic I/OThe ability for HP P6000 Continuous Access to work with an operating system or application is determined by the operating system support documents posted on the Single Point of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock). (To enable SPOCK access, you must sign up for an HP Passport.) If an operating system is supported with a particular P6000 EVA model and controller software version, then HP P6000 Continuous Access is supported with that operating system. There may or may not be support through HP P6000 RSM on that operating system, as indicated in this table. HP P6000 RSM host agentThe HP P6000 RSM host agent is installed on servers running this operating system. The CLUI client is also supported on this operating system if the HP P6000 RSM host agent is supported on it. HP Storage Volume GrowthThe ability for HP Storage Volume Growth to work with this operating system. HP P6000 RSM ServerThe ability for HP P6000 Replication Solutions Manager to be installed on this operating system. You can use HP P6000 RSM Server to manage LUNs that are presented to any P6000 EVA-supported operating system. HP P6000 SmartStart StorageThe ability for HP P6000 SmartStart Storage to work with this operating system. HP P6000 CV and EVAPerfThe ability for HP P6000 Command View and HP Command View EVAPerf to work with this operating system. HP SSSUThe ability for HP StorageWorks Storage Scripting Utility to be installed on and work with this operating system.

Environment HP P6000 RSM Server, OS, or application type Server Dedicated management server General-purpose server General-purpose server IP only connectivity4 HP X1000/X3000 Network Storage Systems and Gateways Operating System Apple Mac OS X Citrix XenServer HP Enterprise Edition HP HP-UX 11.23 PI/11iv2 (64b PA-RISC)6 HP HP-UX 11.23 PI/11iv2 (64b Intel)6 HP HP-UX 11.31/11iv3 (64b PA-RISC)6 HP HP-UX 11.31/11iv3 (64b Intel)6 HP OpenVMS 8.3 on Alpha and Integrity servers HP OpenVMS 8.4 on Alpha and Integrity servers HP Tru64 5.1b-4 IBM AIX 5.3 IBM AIX 6.1
1 2 3

HP Storage Volume Growth 1.1 5

HP P6000 RSM server 5.2 5.3 HP DButil3

host agent1,2 5.2 5.3

HP SS EVA Storage 3.3

HP P6000 SmartStart 3.4

HP CV 9.3 & EVAPerf 9.3

HP P6000 CV 9.4 & EVAPerf 9.4

HP SSSU 9.3 9.4

See Table 4.3, "RSM host agent support" for host volume mounting restrictions. Always use the same version of HP RSM host agent and server software.

HP DButil can be used "as is" for current supported configurations. No additional changes, enhancements, or test support will be accepted. HP recommends purchasing HP Data Protector Zero Downtime Backup/Instant Recovery solution as the proper migration path.
4 This is an iSCSI only implementation and only applies to HP P6000 Command View. For more information, see the EVA iSCSI information available on the EVA iSCSI Connectivity Option (http://h18000.www1.hp.com/products/storageworks/evaiscsiconnect/index.html) and MPX200 Multifunction Router (http://h18006.www1.hp.com/products/storageworks/mpx200mr/index.html?jumpid=reg_R1002_USEN) websites. 5 6

For the HP X3000 Network Storage Gateways, HP SVG is supported on Windows Storage Server 2003 only. Only English and Japanese versions of this operating system are supported.

23

4.2 Supported P6000 software operating environments (cont'd)

Environment HP P6000 RSM Server, OS, or application type host agent1,2 5.2 Microsoft Windows Server 2003 Standard SP2/R2 (x86 32-bit) Microsoft Windows Server 2003 Standard SP2/R2 (x64 64-bit) Microsoft Windows Server 2003 Standard SP2 (Itanium)6, 8 Microsoft Windows Server 2003 Enterprise SP2/R2 (x86 32-bit)
6, 7 7 6, 7 6, 7

HP Storage Volume Growth 1.1

HP P6000 RSM server 5.2 5.3 HP DButil3

HP SS EVA Storage 3.3

HP P6000 SmartStart 3.4

HP CV 9.3 & EVAPerf 9.3

HP P6000 CV 9.4 & EVAPerf 9.4

HP SSSU 9.3 9.4

5.3
8 8

8 8

8
8

8
8

Microsoft Windows Server 2003 Enterprise SP2/R2 (x64 64-bit)6, Microsoft Windows Server 2003 Enterprise SP2 (Itanium)
6, 7 7

8
8

8
8

Microsoft Windows Server 2003 Datacenter SP2 (Itanium)6,

Microsoft Windows Server 2008 Standard SP1/SP2 (x86 32-bit)6 Microsoft Windows Server 2008 Standard SP1/SP2 (x64 64-bit)
6

Microsoft Windows Server 2008 Enterprise SP1/SP2 (x86 32-bit)6 Microsoft Windows Server 2008 Enterprise SP1/SP2 (x64 64-bit) Microsoft Windows Server 2008 (Itanium)6 Microsoft Windows Server 2008 x64 Hyper-V, Hyper-V Server6 Microsoft Windows Server 2008 R2 x64 64-bit6 Microsoft Windows Server 2008 R2 SP1 x64 64-bit6 Microsoft Windows Server 2008 R2 Itanium6 Microsoft Windows Server 2008 R2 SP1 Itanium Microsoft Windows XP6 Red Hat Enterprise Linux AS & ES 4 (x86 32-bit) Update 76 Red Hat Enterprise Linux AS & ES 4 (x64 64-bit) Update 76 Red Hat Enterprise Linux AS & ES 4 (Itanium) Update 76
7 8 9 6 6

The minimum supported version for HP P6000 RSM host agent 3.1 or later is SP2 or R2. SP1 is no longer supported. The host agent on this operating system depends on the WMI HBA classes that are part of Microsoft's fcinfo package, which you can download from http://www.microsoft.com. HP RSM server on Windows XP is supported for simulation mode only.

24

4.2 Supported P6000 software operating environments (cont'd)

Environment HP P6000 RSM Server, OS, or application type Red Hat Linux AS & ES 5 (x86 32-bit) Update 1, 26 Red Hat Linux AS & ES 5 (x64 64-bit) Update 1, 2 Red Hat Linux AS & ES 5 (Itanium) Update 1, 2
6 6 6

host agent 5.2

10,11 10 6

1,2

5.3
10,11 10

HP Storage Volume Growth 1.1

HP P6000 RSM server 5.2 5.3

HP DButil3

HP SS EVA Storage 3.3

HP P6000 SmartStart 3.4

HP CV 9.3 & EVAPerf 9.3

HP P6000 CV 9.4 & EVAPerf 9.4

HP SSSU 9.3 9.4

Red Hat Linux AS & ES 5 (x86 32-bit) Update 3, 4, 5 Red Hat Linux AS & ES 5 (x64 64-bit) Update 3, 4, 5 Red Hat Linux AS & ES 5 (Itanium) Update 3, 4, 5 Sun Solaris 9 (SPARC) Sun Solaris 10 (SPARC) Sun Solaris 10 (x86)
6

19 16
16

SuSE Linux Enterprise Server 10.0 (x86 32-bit) SP1, SP2, SP3 SuSE Linux Enterprise Server 10.0 (x64 64-bit) SP1, SP2, SP3 SuSE Linux Enterprise Server 10.0 (Itanium) SP1, SP2, SP3 SuSE Linux Enterprise Server 11.0 (x86 32-bit) SP1 SuSE Linux Enterprise Server 11.0 (x64 64-bit) SP1 SuSE Linux Enterprise Server 11.0 (Itanium) SP1 VMware ESX Server 3.5.x VMware ESXi Server 3.5.x VMware ESX Server 4.0 VMware ESX Server 4.1 Application SQL Server SQL Server SQL Server SQL Server 2000 2000 2000 2005 Enterprise SP3 or later Developer SP3 or later Standard SP3 or later Enterprise SP1/SP2/SP3

14 13, 14, 15
13, 14, 15

14 13, 14, 15
13, 14, 15

12

12 12 12
12

19 16
16

12 12

SQL Server 2005 Standard SP2/SP3 SQL Server 2008 Enterprise SP1 SQL Server 2008 Standard SP1
10

The host agent on this operating system depends on SNIA libraries that are delivered with HP's SAN Infrastructure offerings. If you have not already done so, go to the software downloads page of the HP Business Support Center web site The host agent on this operating system does not support VERITAS DMP when accessing an EVA4000, EVA4100, EVA6x00, or EVA8x00.

(http://www.hp.com/support/downloads). In the Storage section, click Storage Networking and then select your product.
11 12

Supported with Windows 2003 Standard and Enterprise R2 (x86 and x64) and Windows 2008 Standard and Enterprise R2 (x86 and x64) as a guest operating system. No HBA information will be reported by the host agent in the Windows guest operating system. With HP P6000 RSM 5.0 or later, the Windows guest operating system can be used as both the source and the target or mount host. All operations are supported only on Raw Device Mapped LUNs configured with physical compatibility mode and replicas can also be presented to and mounted on physical hosts running a compatible Windows operating system. HP P6000 DC-Management (extend only on ESX 4.0 or later) and replication operations (virtual machine to virtual machine and only on ESX 4.0 or later) are supported on VMFS volumes using HP Replication Solutions Manager 5.1 or later. VMFS volume replicas can also be presented to and mounted on compatible Windows guest operating systems running on compatible ESX servers.
13 14

HP Command View EVAPerf 9.3 or later is supported on a virtual machine running VMware 4.0 or later if VMDirectPath is enabled.

VMware support (using SCSI Proxy Method) for HP Command View EVA 9.2 or later installation requires XCS 09534000 or later. Before installing HP Command View EVA on a VMware virtual machine, upgrade the EVAs (EVA4400, EVA6400/8400) to XCS 09534000 or later. EVAs that do not support this controller software version, including EVA3000/5000, EVA4000/6000/8000, and EVA4100/6100/8100, should only be managed through HP Command View EVA 9.2 or later installed on a physical management server.
15 16

You can use HP Command View EVA on a VMware virtual machine to manage any EVA model if you are running version 9.3 or later on a virtual machine running VMware 4.0 or later with VMDirectPath enabled. There is no HP SSSU executable for VMware. To install HP SSSU on a VMware host, use the Linux executable.

25

4.3 HP P6000 Replication Solutions Manager host agent support

This table describes HP P6000 Replication Solutions Manager host agent support for: Volume Manager Mounting host volume copies on the same host Multipath solutions Cluster software NOTE: The information in this table is specific to what has been qualified with the HP P6000 Replication Solutions Manager host agent software. It may contain version information that conflicts with the array/operating system support listed on the Single Point of Connectivity Knowledge (SPOCK) website. Use the information in this table specifically for HP P6000 Replication Solutions Manager host agent environments. Mounting a host Host operating system Supported Volume Manager1 volume copy on the same host as the source2 11.23: Native Logical Volume Manager and Veritas Volume Manager (VxVM) 11.31: Native Logical Volume Manager 1.0, 2.0 NA Native Logical Volume7 EVA3000/5000 Active/Passive (VCS 3.xxx) Active/Active (VCS 4.xxx) Compatible multipath solution3 EVA4x00/6x00/8x00 (includes EVA6400/8400) EVA4400, P6300/P6500 EVA Supported cluster software Supported file systems Cluster aware

HP HP-UX

Secure Path Secure Path 3.0F SP1, SP2, or 3.0F SP2 or SP3 SP3

11.23: Secure Path 3.0F SP4, PVlinks5 (no VERITAS DMP) 11.31: Native multipathing

11.23: Autopath/ Secure Path 3.0F SP4 11.31: Native multipathing

Serviceguard6

HFS, VxFS

HP OpenVMS HP Tru64 5.1b-4

Y Y

Native multipathing software Native multipathing software MPIO 1.0.0.x or 1.0.1.x (AntemetA basic HP P6000 Business Copy support only, no host agent support) Not supported

Native cluster software TruCluster

ODS-2, ODS-5 UFS, Native AdvFS

N N

IBM AIX

Native Logical Volume

Secure Path 2.0D SP2 or SP3

8

MPIO 1.0.1.0 (MPIO beta version)

HACMP 5.3

JFS

Microsoft Windows 2003

Replication and DCManagement of Windows dynamic disks and VERITAS Volume Manager are not supported DC-Management of Windows dynamic disks and Veritas Volume Manager are not supported.

Y, except dynamic disks or copies of Windows Cluster Quorum disks in the same cluster

SecurePath 4.0c SP3 or later

HP MPIO full featured DSM for EVA 4.0.0 or 3.02.0x Microsoft Cluster Server

NTFS, FAT32

Y9

Microsoft Windows 2008

Not supported

HP MPIO full featured DSM for EVA 4.01.00 or 3.02.0x

1 2 3 4 5

If a volume group spans more than one storage system, HP P6000 Replication Solutions Manager only supports replication of volume groups spanning storage systems with the same controller software version. Mounting a host volume copy on the same host as the source is supported with HP P6000 Business Copy and HP P6000 Replication Solutions Manager. These solutions apply to HP P6000 Continuous Access in general. With Veritas Volume Manager, this action requires a minimum of version 5.0 and is subject to specific disk layout versions as specified in Veritas documentation.

If you use Pvlinks and require multiple paths to a host volume, you must create the additional paths after the host volume is created. See the HP P6000 Replication Solutions Manager User Guide or HP P6000 Replication Solutions Manager Administrator Guide for more information. P6000 DC-Management is not supported on cluster-aware disks and volume groups. Replication of Advfs volumes on disks is supported, but replication of LSM volumes is not supported. Secure Path 2.0D SP3 is the minimum required version for AIX 5.3. DC-Management is supported on cluster-aware disks. The cluster name in the HP P6000 RSM job name is only supported on Windows 2003.

6 7 8 9

26

4.3 HP P6000 Replication Solutions Manager host agent support (cont'd)

Mounting a host Host operating system Red Hat Linux AS & ES 4 Update 7 Red Hat Linux AS & ES 5 (5.1 for x64) Update 1, 2, 3, 4, 5 Sun Solaris (SPARC)10 Supported Volume volume copy on the Manager
1

Compatible multipath solution3 EVA3000/5000 Active/Passive (VCS 3.xxx) Active/Active (VCS 4.xxx) EVA4x00/6x00/8x00 (includes EVA6400/8400) EVA4400, P6300/P6500 EVA Supported cluster software Supported file systems Cluster aware

same host as the source

2

Sistina 1.08-13 N Sistina 2.02.17 Veritas Volume Manager 4.1 Veritas Volume Manager 5.0 Sistina 2.02.17 Y, except copies of Veritas Volume Manager disk groups Y Secure Path 3.0D SP111,12

HP Device Mapper Multipath kit 4.x QLogic failover driver 8.01.07.25 (no Secure Path) Emulex Multipulse driver 2.2.20

Serviceguard 11.16.xx EXT2, EXT3 Serviceguard 11.18.xx N

Not supported

MPxIO13 and Veritas DMP14

MPxIO 4.4.13

NA

UFS, VxFS

Sun Solaris (x86) SuSE Linux SLES 10.0 SP1, SP2, SP3 SuSE Linux SLES 11.0 SP1

Native Multipath HP Device Mapper Multipath kit 4.x QLogic failover driver 8.01.07.25 (no Secure Path) Emulex Multipulse driver 2.2.20 HP Device Mapper Multipath kit 4.x QLogic failover driver 8.01.07.25 (no Secure Path) Emulex Multipulse driver 2.2.20 NA

NA

UFS,VxFS

Serviceguard 11.18.xx

EXT2, EXT3

Sistina 2.02.39

Serviceguard 11.18.xx

EXT2, EXT3 VMFS 2 (3.5) VMFS 3 (4.0)

VMware 3.5, 4.0, 4.1

10 11 12 13 14

NA

NA

NA

The HP P6000 RSM host agent on the Solaris 9 operating system does not support VERITAS Volume Manager when accessing an EVA4000, EVA4100, EVA6x00, or EVA8x00. To display host properties correctly, HP P6000 RSM requires the QLA2310F/FCA2257P, QLA2342, QLA2340, or LP10000DC host bus adapter when running the Secure Path multipath solution. The HP P6000 RSM host agent on the Solaris operating system only supports SecurePath with controller software 3.028 or earlier only. To display host properties correctly, HP RSM requires the QLA2342 (SUN) host bus adapter when running the MPxIO multipath solution. To display host properties correctly, HP RSM requires the ASL libraries on the host for QLA2310F/FCA2257P, QLA2342, or QLA2340 host bus adapter when running the VERITAS multipath solution.

27

4.4 HP P6000 Replication Solutions Manager host agent and HP P6000 DC-Management compatibility
This table shows which versions of HP P6000 Replication Solutions Manager host agent software (by operating system) that are supported with HP P6000 Dynamic Capacity Management features. See Table 4.5, HP P6000 Dynamic Capacity Management compatibility, for compatibility with other P6000/EVA applications. See Table 4.2, Supported P6000 software operating environments, for operating system and HP P6000 Replication Solutions Manager host agent compatibility. HP RSM host agent 5.2 Operating system HP HP-UX 11.23 PI/11iv2 (64b Intel)1 HP HP-UX 11.31/11iv3 (64b PA-RISC)1 HP HP-UX 11.31/11iv3 (64b Intel)
1

HP P6000 RSM host agent 5.3 P6000 DCM Extend P6000 DCM Shrink 2 3
3

DCM Extend 2 3
3

DCM Shrink 2 3
3

2 3 3

HP OpenVMS 8.3 on Alpha and Integrity servers HP OpenVMS 8.4 on Alpha and Integrity servers HP Tru64 5.1b-4 IBM AIX 5.3 IBM AIX 6.1 Microsoft Windows Server 2003 Standard SP2/R2 (x86 32-bit) Microsoft Windows Server 2003 Standard SP2/R2 (x64 64-bit) Microsoft Windows Server 2003 Standard SP2 (Itanium) Microsoft Windows Server 2003 Enterprise SP2/R2 (x86 32-bit)
4

4 4

Microsoft Windows Server 2003 Enterprise SP2/R2 (x64 64-bit)4 Microsoft Windows Server 2003 Enterprise SP2 (Itanium) Microsoft Windows Server 2003 Datacenter SP2 (Itanium) Microsoft Windows Server 2008 (Itanium) Microsoft Windows Server 2008 Standard SP1/SP2 (x86 32-bit) Microsoft Windows Server 2008 Standard SP1/SP2 (x64 64-bit) Microsoft Windows Server 2008 Enterprise SP1/SP2 (x86 32-bit) Microsoft Windows Server 2008 Enterprise SP1/SP2 (x64 64-bit) Microsoft Windows Server 2008 R2 x64 64-bit Microsoft Windows Server 2008 R2 SP1 x64 64-bit Microsoft Windows Server 2008 R2 Itanium Microsoft Windows Server 2008 R2 SP1 Itanium
1 2 4

Online extend is supported on VxVM configurations.

On HP-UX 11.23, only manual (not policy-based) extend and shrink is supported. For more information, see "P6000 DC-Management support" in the HPP6000Replication Solutions Manager User Guide . On HP-UX 11.31, extend and shrink is not supported on HFS file systems. Shrink is supported only on Veritas online JFS host volumes that are not part of a volume manager (Native or Veritas). For more information, see "DC-Management support" in the HPP6000Replication Solutions Manager User Guide and the latest HP P6000 Replication Solutions Manager release notes. Also supported as a guest OS with the HP P6000 RSM host agent on VMware ESX 3.5.x and 4.0 and ESXi 3.5.x and as a guest OS with the HP P6000 RSM server software on VMware ESX 3.5.x and 4.0.
4 3

28

4.4 HP P6000 Replication Solutions Manager host agent and HP P6000 DC-Management compatibility (cont'd)
HP RSM host agent 5.2 Operating system Red Hat Enterprise Linux AS & ES 4 (x86 32-bit) Update 7 Red Hat Enterprise Linux AS & ES 4 (x64 64-bit) Update 7 Red Hat Enterprise Linux AS & ES 4 (Itanium) Update 7 Red Hat Enterprise Linux AS & ES 5 (x86 32-bit) Update 1, 2, 3, 4, 5 Red Hat Enterprise Linux AS & ES 5 (x64 64-bit) Update 1, 2, 3, 4, 5 Red Hat Enterprise Linux AS & ES 5 (Itanium) Update 1, 2, 3, 4, 55 Sun Solaris 9 (SPARC) Sun Solaris 10 (SPARC) Sun Solaris 10 (x86) SuSE Linux Enterprise Server 10.0 (x86 32-bit) SP1, SP2, SP3 SuSE Linux Enterprise Server 10.0 (x64 64-bit) SP1, SP2, SP3 SuSE Linux Enterprise Server 10.0 (Itanium) SP1, SP2, SP35 SuSE Linux Enterprise Server 11.0 (x86 32-bit) SP1 SuSE Linux Enterprise Server 11.0 (x64 64-bit) SP1 SuSE Linux Enterprise Server 11.0 (Itanium) SP1 VMware ESX 3.5.x6 VMware ESXi 3.5.x VMware ESX 4.0 VMware ESX 4.1
5 6 6 6 6 5 5 5 5

HP P6000 RSM host agent 5.3 P6000 DCM Extend P6000 DCM Shrink

DCM Extend

DCM Shrink

7
7

7 7 7 7

Offline HP P6000 Dynamic Capacity Management on limited non-LVM configurations is supported.

Supported with Windows 2003 Standard and Enterprise R2 (x86 and x64) and Windows 2008 Standard and Enterprise R2 (x86 and x64) as a guest operating system. No HBA information will be reported by the host agent in the Windows guest operating system. With HP P6000 RSM 5.0 or later, the Windows guest operating system can be used as both the source and the target or mount host. All operations are supported only on Raw Device Mapped LUNs configured with physical compatibility mode and replicas can also be presented to and mounted on physical hosts running a compatible Windows operating system. HP P6000 DC-Management (extend only on ESX 4.0 or later) and replication operations (virtual machine to virtual machine and only on ESX 4.0 or later) are supported on VMFS volumes using HP P6000 Replication Solutions Manager 5.1 or later. VMFS volume replicas can also be presented to and mounted on compatible Windows guest operating systems running on compatible ESX servers. Shrink is not supported when using Windows 2003 as the guest operating system on Raw Device Mapping LUNs. Shrink is not supported on VMFS volumes.

29

4.5 HP P6000 Dynamic Capacity Management compatibility

This table shows how HP P6000 Dynamic Capacity Management is compatible with HP P6000 Command View, HP P6000 Replication Solutions Manager, and controller software versions. Application HP HP HP HP HP HP HP HP Command View EVA 8.0.x Command View EVA 8.1 Command View EVA 9.0.1 Command View EVA 9.1 Command View EVA 9.2.x Command View EVA 9.3 P6000 Command View 9.4 Replication Solutions Manager 4.0.x HP P6000 Dynamic Capacity Management Extend Shrink

HP Replication Solutions Manager 5.0 HP Replication Solutions Manager 5.1 HP Replication Solutions Manager 5.2 HP P6000 Replication Solutions Manager 5.3 VCS 3.1xx VCS 4.1xx XCS 6.1xx XCS 6.2xx XCS 09000000/09001000 XCS 09003000 XCS 09004000 XCS 09006000 XCS 09501x00 XCS 0952x000 XCS 0953x000 XCS 10000000

30

4.6 Array configuration by HP P6000 Replication Solutions Manager version

This table describes the recommended array configuration by HP P6000 Replication Solutions Manager version. Feature Maximum number of arrays per HP P6000 Command View instance Maximum number of array-based management systems per HP P6000 Replication Solutions Manager instance Maximum number of enabled hosts Maximum number of host volumes across all enabled hosts Maximum number of virtual disks per volume group Maximum number of host volumes per volume group HP RSM 4.0.1 4 2 8 127 32 127 Linux: 1 UNIX: 8 Windows: 4 8 HP RSM 5.0 4 2 8 160 32 127 Linux: 1 UNIX: 8 Windows: 4 8 HP RSM 5.1 8 12 12 600 32 127 Linux: 1 UNIX: 8 Windows: 5 8 HP RSM 5.2 8 12 12 600 32 127 Linux: 1 UNIX: 8 Windows: 5 8 HP P6000 RSM 5.3 8 12 12 600 32 127 Linux: 1 UNIX: 8 Windows: 5 Windows Guest: 1 8

Maximum number of jobs running simultaneously using the same enabled host Maximum number of jobs running simultaneously per HP P6000 Replication Solutions Manager instance

31

5.0 Browser support

This table lists the supported browsers you can use to access HP P6000 software user interfaces. If the browser version you are using is earlier that what is listed here, you must upgrade your browser. When using HP Management Integration Framework, a minimum of Adobe Flash Player 10 is required on the browser you are using. Browser Firefox Internet Explorer Version 3.0 or later 7.0 or later

32

6.0 Features supported by controller software version 6.1 Supported array features by controller software version
Array features depend on the controller software version. An HP P6000 Command View license is required to use these features. Controller software version Feature Maximum number of arrays per HP P6000 Command View instance1 Maximum number of virtual disks per array (includes snapshots, snapclones, mirrorclones, and DR group logs) Maximum number of disk groups per array5 Maximum number of hosts (clustered or standalone) per array7 Maximum virtual mapping capacity8 Large LUN support Thin provisioning Vraid6 support
1 11

VCS 3.1xx EVA3000/5000 16

VCS 4.1xx EVA3000/5000 16

XCS 6.2xx EVA4x00/6x00/8x00 16

XCS 095xx000 EVA4400 16

XCS 095xx000 EVA6400/8400 16

XCS 10000000 XCS 10000000 EVA4400 16

XCS 10000000

EVA6400/8400 P6300/P6500 EVA 16 16

512 16 256 35 TB

1024 16 256 35 TB

1024 16 256 120/120/300 TB

10242, 3 126 256 120 TB

9

20482, 16 256

10242, 3 125 256 120 TB

10

20482, 16 256

1024/20482, 3, 4 16 256 300/800 TB 10

300/500 TB
9

300/500 TB
10

HP recommends a maximum of eight arrays per HP Command View EVA 9.2 or later instance. When running HP Command View EVA 9.1 or earlier, the recommended maximum is four. This recommendation applies to all management server types. On the EVAx400 and P6300/P6500 EVA, the maximum number of virtual disks per array also includes DR group logs. One LUN (LUN 0) is always reserved by the controller software. The number of DR group log virtual disks will reduce the total number of virtual disks available to the user. If the array configuration includes virtual disks that are greater than 2 TB, then the maximum number of virtual disks (including snapshots, snapclones, and mirrorclones) per array will be less than the maximum listed. The P6300/P6500 EVA iSCSI controllers support a maximum of 256 initiators and 255 LUNs (plus LUN 0). The P6300/P6500 EVA iSCSI/FCoE controllers support a maximum of 1024 initiators, 1024 LUNs, and 256 LUNs per virtual port group. The maximum number of disk groups is also limited by the maximum number of disks. For Fibre Channel disk drives, each disk group requires a minimum of 8 disks. For solid state disk (SSD) drives, each disk group requires a minimum of 6 and a maximum of 8 disks. The EVA4400 supports a maximum of 96 disks, so a maximum of 12 disk groups (8 disks per group) is supported. For additional maximums and rules on host presentations, See the "Configuration parameters section of the P6000/EVA storage system rules chapter in the HP SAN Design Reference Guide .

3 4

6 7 8

The virtual mapping capacity is the sum of all virtual disks plus the mapped capacity of snapshots, snapclones, and mirrorclones. For HP P6000 Continuous Access configurations, the DR log file size is also included in this sum. Note that demand-allocated and fully-allocated snapshots consume mapping capacity equal to the size of the source virtual disk. For information about enclosure capacity, see the QuickSpecs for the applicable array model. Create virtual disks (LUNs) that are larger than 2 TB (32 TB maximum). The operations allowed on virtual disks that are 2TB or greater are create, present, and delete.

10

Create virtual disks (LUNs) that are larger than 2 TB (32 TB maximum). The operations allowed on virtual disks or snapshots that are 2TB or greater are create, present, delete, extend, and shrink virtual disks; create and delete snapshots; and create, delete, and attach empty containers.
11

The operations allowed on thin provisioned virtual disks are create, present, delete, extend, and shrink.

33

6.2 Supported local replication feature by controller software version

Local replication features depend on the controller software version. An HP P6000 Business Copy license is required to use these features. When using one of the P6000 software user interfaces or command line interfaces, if the selected resource does not support an action, it will not be available in either the user interface or the command line interface. For example, in HP P6000 Replication Solutions Manager, if you try to create a container on an array that does not support containers, the New Container action will not work. Controller software version Feature Direct connect VCS 3.1xx VCS 4.1xx XCS 6.2xx XCS 095xx000 (EVA4400) XCS 095xx000 (EVA6400/8400) XCS 10000000 (EVA4400) XCS 10000000 (EVA6400/8400) XCS 10000000 (P6300/P6500 EVA)

Not supported in HP P6000 Replication Solutions Manager environments, except with certain restrictions for Windows hosts. Specifically, you cannot mount snapshots or snapclones on a Windows host that is running the HP P6000 Replication Solutions Manager host agent and is directly attached to an array running XCS controller software. If the operating system supports Boot from SAN, replication of a point-in-time copy of the boot volume (snapshot, snapclone, or mirrorclone) is supported.

Boot from SAN Containers Maximum size of a container Maximum number of virtual disks supported with MULTISNAP commands (HP SSSU) Space-efficient empty container Mirrorclones Create mirrorclones Create mirrorclones of virtual disks in DR groups Maximum number of virtual disks supported with MULTIMIRROR commands (HP SSSU) Online virtual disk migration (Vraid and disk group) Restore data from mirrorclone to source virtual disk Restore data from snapshot of mirrorclone to source virtual disk Resynchronize data from source virtual disk to mirrorclone Set Vraid in copy Snapclones Create containers (for snapclones) Create snapclones in preallocated containers Set disk group (for snapclones) Set Vraid in copy Snapshots Controller software enforced cross Vraid guidelines Create fully-allocated snapshots in preallocated containers Maximum number of snapshots per source virtual disk1 Maximum number of virtual disks supported with MULTISNAP commands (HP SSSU) Restore data from snapshot to source virtual disk Set Vraid in copy Space-efficient empty container
1

2 TB (less 1 GB) 10 28 28 28 10 28 28 28 7 7 16 10 64 28 64 28 64 28

32 TB 28 28 64 28 28 28 64 28

16 TB maximum across the parent and all active snapshots of that parent. For XCS 09501x00, the maximum is 80 TB.

34

6.3 Supported remote replication feature by controller software version

Remote replication features depend on the controller software version. An HP P6000 Continuous Access license is required to use these features. When using one of the P6000 software user interfaces or command line interfaces, if the selected resource does not support an action, it will not be available in either the user interface or the command line interface. For example, in HP P6000 Replication Solutions Manager, if you try to force a full copy on an array that does not support this feature, the Force Full Copy action will not work. The following general rules apply to remote replication between arrays running different controller software versions (XCS and VCS). See Table 3.3, "Controller software version support in remote replication environments," for controller software version compatibility. If a feature, such as the maximum number of members of a DR group, is supported differently in the source and destination arrays, the more restrictive value applies to the source-destination DR group pair. If a feature is not available in both controller software versions, the feature cannot be used in a source-destination DR group pair. IMPORTANT: Testing of FC-IP support with HP P6000 Continuous Access is ongoing. For the latest information, see "Part IV, SAN extension and bridging" of the HP SAN Design Reference Guide . Controller software version Feature Asynchronous write mode (basic) Asynchronous write mode (enhanced) Auto suspend on full copy (set at creation) Auto suspend on links down (set at creation) Bandwidth VCS 3.1xx VCS 4.1xx XCS 6.2xx XCS 0952x000 (EVAx400) XCS 0953x000 (EVAx400) XCS 10000000 (EVAx400) XCS 10000000 (P6300/P6500 EVA)

HP P6000 Continuous Access supports a minimum bandwidth of 4 Mb/s. See the HP P6000Continuous Access Implementation Guide for more information about selecting the appropriate replication link. Note: HP P6000 Replication Solutions Manager exhibits long management delays when managing remote arrays that are connected via low bandwidth links with over 36 ms of one-way latency. If the operating system supports Boot from SAN, replication of the boot disk is supported. Cross-cabling optional HP P6000 Continuous Access supports all clustering solutions that are supported on the EVA. To determine the supported clustering solution for an operating system, go to the Single Point of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock) as described in Table 7.0, EVA host connectivity. 1

Boot from SAN Cabling scheme Clustering solutions with HP P6000 Continuous Access

Create a DR group or add/remove DR group members in enhanced asynchronous mode Cross Vraid for remote copy Data Replication Protocol (user configurable) DR group log file size (controller software default)

2x the combined size Smaller of: of DR group members 2,047.99 GB maximum virtual disk size (cannot be changed) Remaining space in disk group in which the DR group log resides The sum of the sizes of the members within the DR group2 Maximum log file size within these parameters: 2,047.99 GB maximum virtual disk size

1 1 100 GB (Synchronous and Asynchronous)

DR group log file size (user configurable)3

Greater than 136 MB4, 5 Less than or equal to the available capacity in the source log disk group. The capacity selected must also be available in the destination log disk group. DR group member extend DR group member shrink Dynamic Capacity Management
1 2 3

The HP SCSI FC Protocol is supported on controller software versions 0953x000 or later. For more information, see the HP P6000Continuous Access Implementation Guide . The controller software default maximum log size for XCS 6.2xx or later running on the EVA4000/4100/6x00/8x00 is 100 GB for enhanced asynchronous.

You can only change the size of the log file when the DR group write mode is set to synchronous. The transition from asynchronous logging to synchronous logging must complete before changing the log file size, which is available in XCS 6.1xx or later.
4

If the size specified is not greater than or equal to the asynchronous minimum log size and you attempt to change to asynchronous mode, the command will fail. For the EVA4000/4100/6x00/8x00 running XCS 6.1xx or later, the minimum log size is 1,624 MB for enhanced asynchronous mode. For the EVA4400 running XCS 09000000 or later, the capacity must be greater than 5 GB.

35

6.3 Support remote replication feature by controller software version (cont'd)

Controller software version Feature Fail over or delete a DR group during normalization Failsafe on Link-down/Power-up support Failsafe on Unavailable Member (Failsafe mode) Force a full copy Host HBAs per array Instant restore of virtual disks6 Restore data from mirrorclone to source virtual disk Restore data from snapshot of mirrorclone to source virtual disk Restore data from snapshot to source virtual disk Maximum number of single-member DR groups per array
7

VCS 3.1xx

VCS 4.1xx

XCS 6.2xx

XCS 095xx000 (EVAx400)

XCS 10000000 (EVAx400)

XCS 10000000 (P6300/P6500 EVA)

The maximum depends on an array's platform/operating system rules. See "Part III, Host and storage systems rules" of the HP SAN Design Reference Guide and the Quickspecs for HP P6000 Continuous Access and the applicable array model.

128 128 8 16

128 128 32 16

256 256 32 32

128 (4400) 256 (64/8400) 128 (4400) 256 (64/8400) 32 80 4:1

8

128 (4400) 256 (64/8400) 128 (4400) 256 (64/8400) 32 80 4:1

8

128 (4400) 256 (64/8400) 128 (4400) 256 (64/8400) 32 80 4:18

Maximum number of virtual disk members of all DR groups per array

7

Maximum number of virtual disk members per DR group Maximum combined capacity (in TB) of a DR group's virtual disk members and those members' snapshots, snapclones, or mirrorclones Preferred path Replication relationships Set access to no-read on remote copy Set disk group for log disk (at creation) Set host port priority for replication Set maximum log disk size (at creation) Set Vraid on remote copy (at creation) Source and destination pair size Suspend on failover (set at creation) Switches per fabric
6 7 8 9

2:1

2:1

4:1

1 GB to 2 TB (in 1 GB increments)

See "Part II, Fabric infrastructure rules" of the HP SAN Design Reference Guide .

In XCS versions 6.2xx and 09501x000 or later, the instant restore of the source DR group member results in a Fast Copy of the new data, not a Full Copy. For best performance when using HP P6000 Replication Solutions Manager, do not exceed 512 single-member DR groups and 512 source-destination pairs across all arrays. Other limits may apply.

4:1 is only supported when the source of the FAN-out or the target of the FAN-in is a high-end array, which is an array with 4 host ports per controller or 8 host ports per array. Any HP P6000 Continuous Access-supported array can be the target of the FAN-out or the source of the FAN-in.
9

The switch restrictions that previously applied to XCS 09003000 have been removed. See Table 7.0, EVA host connectivity, for details on how to locate switch support information.

36

7.0 P6000 EVA host connectivity

For detailed specifications about supported operating systems and switches, go to the Single Point of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock). You must log in to access SPOCK. If you do not already have an account, click Register to log in on the main page and follow the instructions. Once access is enabled, select View by Array/OS under Compatibility Tool in the left menu and then select the array and operating system combination that applies to your environment. Once you make your selection, you can view component support information about your environment. Expand Host Bus Adapter (HBA) to view supported HBA details. Expand Fibre Channel Switch to view supported switches. To view details for a supported switch, navigate to Other Hardware in the left menu and select Switches. Then select the connectivity stream document for the switch model/series you are using to view specific support details. For more information on how to use SPOCK, see the Getting Started Guide (http://h20272.www2.hp.com/Pages/spock_overview/introduction.html).

37

8.0 Solid state disk (SSD) support

This table lists feature support for solid state disks. SSDs must be in a separate disk group. For disk drive firmware versions and other general disk drive and XCS support, see the HP P6000 Enterprise Virtual Array Disk Drive Firmware Support document, which is available at: http://www.hp.com/support/manuals. Under storage, select Disk Storage Systems, and then select your array model under P6000/EVA Disk Arrays. Array family1 EVA4400, EVA6400/8400
1 2

Minimum/maximum number of drives 6/8

Vraid level Vraid12, Vraid5

HP P6000 Business Copy All features supported

HP P6000 Continuous Access Not supported

HP P6000 DC-Management Extend/shrink not supported

The 72 GB SSD requires XCS 09500000 or later. The 200 GB and 400 GB SSDs require XCS 09534000 or later. Vraid1 requires XCS 09534000 or later.

38