Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 536 views

    BMW-EWS2-Bypass Bloqueo E36

    Uploaded by

    Jorge Sepulveda
    This document provides instructions for bypassing the engine wiring security (EWS) module on certain BMW models, allowing the car to start without the immobilizer function. It involves disconnecting the negative battery terminal, finding and disconnecting the EWS module behind the glovebox, and using a jumper cable to connect pins 1 and 3 on the EWS harness. Reconnecting the battery then allows the car to start without the EWS module. Diagrams show the location of the EWS module and how to connect the jumper cable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BMW-EWS2-Bypass Bloqueo E36

    Uploaded by

    Jorge Sepulveda
    536 views1 page
    This document provides instructions for bypassing the engine wiring security (EWS) module on certain BMW models, allowing the car to start without the immobilizer function. It involves disconnecting the negative battery terminal, finding and disconnecting the EWS module behind the glovebox, and using a jumper cable to connect pins 1 and 3 on the EWS harness. Reconnecting the battery then allows the car to start without the EWS module. Diagrams show the location of the EWS module and how to connect the jumper cable.

    Original Description:

    BMW-EWS2-Bypass Bloqueo E36

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for bypassing the engine wiring security (EWS) module on certain BMW models, allowing the car to start without the immobilizer function. It involves disconnecting the negative battery terminal, finding and disconnecting the EWS module behind the glovebox, and using a jumper cable to connect pins 1 and 3 on the EWS harness. Reconnecting the battery then allows the car to start without the EWS module. Diagrams show the location of the EWS module and how to connect the jumper cable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    536 views1 page

    BMW-EWS2-Bypass Bloqueo E36

    Uploaded by

    Jorge Sepulveda
    This document provides instructions for bypassing the engine wiring security (EWS) module on certain BMW models, allowing the car to start without the immobilizer function. It involves disconnecting the negative battery terminal, finding and disconnecting the EWS module behind the glovebox, and using a jumper cable to connect pins 1 and 3 on the EWS harness. Reconnecting the battery then allows the car to start without the EWS module. Diagrams show the location of the EWS module and how to connect the jumper cable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    SPECIALIZED 1-800-328-1425

    WWW.ECUDOCTORS.COM
    ECU REPAIR 941 NE 48TH ST.
    OAKLAND PARK, FL 33334

    EWS 2 Bypass Procedure


    for BMWs E34 (’95-3/97), E36 (’96-’99), E38 (’95-9/96*)

    Your ECU has had it’s Immobilizer function


    removed. Now you will need to bypass and jump
    the EWS module in order to start the car.
    1. Disconnect the negative side of the battery.
    2. Find the EWS module behind the glovebox, and
    disconnect it. (You won’t need the EWS anymore.)
    3. Use our jumper cable, and connect it from
    Pin #1 to Pin #3 on the EWS harness.
    4. Connect the ECU to the car.
    5. Reconnect the negative side of the battery.
    6. Start the car.

    Steps to find the EWS module

    Connect Jumper Cable


    from Pin 1 to Pin 3

    www.ecudoctors.com Page 1 of 1

    You might also like