)!


                        
  
  


34665W PONTICELLI - UPSTREAM LLC
SAND TREATMENT PACKAGE (ASABI-A-3401)

PIPING ISOMETRIC DRAWING


 

 

  
     
   
  

   
  
  

        
 
 




   

   
  


Digitally


  
signed by
Digitally signed by
Atul Takalkar
Arun Arun Babu

 
 

Date:

  
Date: 2022.10.17

 


15:48:10 +05'30' Babu 2022.10.17
15:48:22


   
   
  
+04'00'

 
      
  

  

   
  

    
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
IF IN DOUBT ASK DO NOT SCALE

B
N 0151-05

0151-02 0151-04
Bs

Bs
Bs Bs
C

Bs
Bs Bs
sB

Bs
D
0151-01 B Bs
B

2
1-0
015
Bs
E
sB 0151-06
0151-07

Bs

Bs
F

Bs
0151-03 0151-15

Bs

Bs
G

Bs

Bs
0151-13 0151-14

Bs
H

0151-08
0152-02
B
J
Bs

Bs
Bs
0151-12
sB
Bs

Bs
Bs

L
Bs

Bs
Bs

Bs
sB
M
sB Bs

Bs
Bs
Bs
Bs

0152-01 0151-08 Bs
TEMPLATE: ISO SHEET-A3 Rev.B

Bs
sB

Bs

P
0151-09 0151-11

0151-10
0150-02
PIPING SPEC. NDT. (RT,MPI,DPI,PMI) DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE PAINT SPEC. C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - MARKUP
OUTSIDE ALDERLEY IS
DESIGN PRESSURE P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION PVA GM AB DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) PWHT SCALE
NTS 34665W-01-D-0150-02 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
IF IN DOUBT ASK DO NOT SCALE

B
N

B
C
0152-04

B
0152-05
D

B
0152-08

B
E
0152-06

B
B

B
B
B

B
B
0152-03

B
F

B
B

B
B

B
G B

B
B
B

B
H B
B

B
B
J

0152-07

K
B

L
0152-09

M
TEMPLATE: ISO SHEET-A3 Rev.B

0150-03
PIPING SPEC. NDT. (RT,MPI,DPI,PMI) DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE PAINT SPEC. C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - MARKUP
OUTSIDE ALDERLEY IS
DESIGN PRESSURE P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB DRG.No. SHT REV.

INSULATION. (HOT/COLD) PWHT 34665W-01-D-0150-03 1 A

ISSUE DATE DESCRIPTION DRN CHKD APRVD SCALE
NTS 1
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B N 1 2 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE,

SCH 40S, ASME B36.10/B36.19, ASTM A312
0.4 M 1.9

S31254/A358 S31254 CL1

2 2 FLANGE, WN, RF, CL300, ASME B16.5, SCH 40S, 2 7.3
ASTM A182 F44
3 2 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 1 1.0
C
S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL
THERMICULITE, MICA OR EQUIVAENT, SS316 INNER
& CENTERING RING 3.2MM
216 N
T. O 2
4 5/8X100 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0
D
O N
C 1-0 WASHER(S), ASTM A1082 S32760, IMPACT TESTED
015 -101 DEG. C
1 5 2 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 17.3
E

[1] 5
F 696
2 3 4
477 3
146
G

1
PS
1
<A>
H

J TOTAL WT. 29.3 KGS.

2 CUT LIST DATA

P-1 CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K
T END-2
NO. LENGTH NO. LENGTH
2 A 2" 334 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
6. FOR PIPE SUPPORT DETAIL REFER DRAWING NUMBER 34665W-01-D-0179-01
HOLD
0151-01
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN Telephone-+971 4 8042777
PERMISSION
PONTICELLI
CUSTOMER SITE Fax-+971 4 8835295
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB HYDROTEST PRES. 0.5 barg HOLD GA DRG. NO. 34665W-01-D-0101-01 DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-01 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 2 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE,
SCH 40S, ASME B36.10/B36.19, ASTM A312
0.5 M 2.6

S31254/A358 S31254 CL1

2 3X2 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 10S X 1 0.6
40S, ASTM A403 S31254 WP-S/WP-WX
3 3 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 1.2
C
10S, ASTM A403 S31254 WP-S/WP-WX
4 2X2 TEE EQUAL, BW, ASME B16.9, SCH 40S, ASTM A403 1 0.9
S31254 WP-S/WP-WX

D 6 5 3 FLANGE, WN, RJ, CL900, ASME B16.5, SCH 10S, 1 13.2

3 ASTM A182 F44
270

136
6 2 FLANGE, WN, RF, CL300, ASME B16.5, SCH 40S, 2 7.3
ASTM A182 F44
2
7 3 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 1 1.0

[1]
E
4
1 TYPE R, ANNEALED UNS N10276, MAX. HARDNESS

225
200HV R31
5 3
HOLD 8 5/8X100 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0
2
4
880
F WASHER(S), ASTM A1082 S32760, IMPACT TESTED

CONT. ON
-101 DEG. C

0151-03
5 7 10
610
9 2 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 1 1.0
HOLD
S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL
1
G
THERMICULITE, MICA OR EQUIVAENT, SS316 INNER
<A> & CENTERING RING 3.2MM
10 3/4X120 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 8 1.0
H
ASTM A1082 S32760, IMPACT TESTED @ -101 DEG. C

N TOTAL WT. 26.5 KGS.

T. O
J 6

CON1-01
015
6 8 9 CUT LIST DATA
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 2" 473 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
TEMPLATE: ISO SHEET-A3 Rev.B

N 2. PIPING TOLERANCES AS PER AFZE/STD/002 PART NOS.

3. NDT:
RT : <> CUT PC. NOS.
PT :
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.

0151-02 HOLD
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN Telephone-+971 4 8042777
PERMISSION CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
Fax-+971 4 8835295

A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB HYDROTEST PRES. 0.5 barg HOLD GA DRG. NO. 34665W-01-D-0101-01 DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-02 1 1 A
A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT. REMARKS
(INS) DESCRIPTION QTY. Kgs.
N NO.
1 4 PIPE, SMLS, BW, SCH 40S, ASTM A312 1.0 M 14.7
B S31254/A358 S31254 CL1 S31254 /ASTM A358
S31254 CL1, ASME B36.10M
2 4 PIPE, SMLS, BW, SCH 40S, ASTM A312 S31254 0.2 M 2.1
/ASTM A358 S31254 CL1 OR CL3, ASME B36.10M
3 4X2 TEE REDUCING, BW, ASME B16.9, SMLS, SCH 40S X 3 10.2
C
40S, ASTM A403 S31254 WP-S/WP-WX,
4 4 SPEC BLIND, RJ, 900 LB, ASTM A240 UNS S31254, 1 8.2
B16.48
5 4 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 2 7.6
D
40S, ASTM A403 S31254 WP-S/WP-WX,
R
CTO
692 EDU 6 4 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 3.8
40S, ASTM A403 S31254 WP-S/WP-WX, ASME B16.9
E 7 4 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 40S, 2 46.3
1 15 7 9 11 441 ASTM A182 F44
<E> 5 HOLD 8 2 FLANGE, WN, RJ, CL1500, ASME B16.5, SCH 40S, 3 32.7
260 14 3
[1]
ASTM A182 F44
F 3 734 <A> 9 4 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 3 3.0
5 13
8 10 12 2
2
1 TYPE R, ANNEALED UNS N10276, MAX. HARDNESS
131 1 19
<B>
12 200HV, R37 R37
201 9 10 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 3 3.0
G
11 1 TYPE R, ANNEALED UNS N10276, MAX. HARDNESS
4
3 7 9 11 N1 200HV, R24 ; R24
318 6
5
8 10 12 11 1 1/8X185 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 16 -
ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
<D> 2

<C>1 201 12 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 24 -

4
436

260 7 ASTM A1082 S32760, IMPACT TESTED -101 DEG. C

3
J 10
9
8
8 10 12 TOTAL WT. 131.3 KGS.

201 CUT LIST DATA

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

6 NO. LENGTH NO. LENGTH END-2

A 4" 162 BEVEL BEVEL
B 4" 471 BEVEL BEVEL
L
C 4" 102 BEVEL BEVEL
D 4" 126 BEVEL BEVEL
E 4" 200 BEVEL BEVEL
M

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
N 2. PIPING TOLERANCES AS PER AFZE/STD/002 PART NOS.
3. NDT:
RT :
PT :
<> CUT PC. NOS.
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.

0151-03 HOLD
PIPING SPEC. EM1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-03 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 4 PIPE, SMLS, BW, SCH 120, ASTM A333 GRADE 6,
ASME B36.10M
0.2 M 5.6

2 4 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 120, 2 46.3
ASTM A350 LF2 CL1
3 4 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 2 2.0
TYPE R, SOLUTION ANNEALED SS316, MAX.
C
HARDNESS 140 HB, R37 ; R37
4 1 1/8X185 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 24 2.0
ASTM A320 GRADE L7, ASTM A194 GRADE 7L S3,
HOLD
HOT DIP GALVANIZED AS PER ASTM A153
457 N
D

O N T. O5 5 4 CHECK VALVE, RJ, FLG., 900 LB, ASTM A350 LF2 1 154.3
C 4-0 CL, API 6D, ASME B16.34
015
E

F
HOLD
446 5

< A >1 2 3 4
G
[1]

J
R 2 TOTAL WT. 208.1 KGS.
DU CTO
E
CUT LIST DATA
2 3 4 CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 4" 198 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-04
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

INSULATION. (HOT/COLD) N/A PWHT N/A 34665W-01-D-0151-04 1 A

ISSUE DATE DESCRIPTION DRN CHKD APRVD SCALE
NTS 1
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1
2
3
2
PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6, ASME B36.10M
PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6, ASME B36.10M
0.4 M
0.3 M
8.0
3.2
3 4X3 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 120 X 160, ASTM A420 WPL6 1 2.6
4 3X3 TEE EQUAL, BW, ASME B16.9, SMLS, SCH 160, ASTM A420 WPL6 1 4.5
5 3X2 ECCENTRIC REDUCER, BW, ASME B16.9, SCH 160 X 160, ASTM A420 WPL6 1 1.5
6 3X2 TEE REDUCING, BW, ASME B16.9, SMLS, SCH 40S X 1 2.0
C
40S, ASTM A403 S31254 WP-S/WP-WX,
7 3 ELBOW, 90 DEG. LR, BW, ASME B16.9, SCH 160, ASTM A420 WPL6 2 7.7

518 203 7
8
9
2
4
ELBOW, 90 DEG. LR, BW, ASME B16.9, SCH 160, ASTM A420 WPL6
FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 120, ASTM A350 LF2 CL1 1
1 1.4
23.2
188
D
10 3 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 160, ASTM A350 LF2 CL1 1 13.2

315 10
9 534 11 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH160, ASTM A350 LF2 CL1 1 10.9
12 2 FLANGE, WN, RJ, CL1500, ASME B16.5, SCH 40S, ASTM A182 F44 1 10.9
6 <D> 13 4 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 TYPE R, 1 1.0
E
9 13 17 12 11 1 SOLUTION ANNEALED SS316, MAX. HARDNESS 140 HB, R37 ; R37
7 14 3 HARDNESS 140 HB, R31 ; R31 1 1.0
N
O N T. O4 13 3 15 2 HARDNESS 140 HB, R24 ; R24 2 2.0
F C 1-0 12 16 19 16 2 200HV, R24 ; R24 1 1.0
015 8 17 1 1/8X185 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0
18 7/8X160 WASHER(S), ASTM A320 GRADE L7, ASTM A194 16 1.0

7 19 7/8X160 GRADE 7L S3, HOT DIP GALVANIZED AS PER ASTM A153 8 1.0
G
20 7/8X160 8 1.0
21 2 BLIND FLANGE, RJ, 1500 LB ASTM A350 LF2 CL1, 1 11.4

301
ASME B16.5

277
3

<C> 1
22 2 BALL VALVE, RJ, FLG., 1500 LB, ASTM A350 LF2, CL 1 56.7
8

63 438
H
2

6
2
] < A>
[2 <B
371 >
2
J 6 TOTAL WT. 161.6 KGS.
21
1

15 18 11 15 18
CUT LIST DATA

19
4
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

8
22 5
14
END-2
5 4 NO. LENGTH NO. LENGTH
14MM OFFSET CON A 2" 110 BEVEL BEVEL
10 14 20 T
[1] 0151. ON B 2" 178 BEVEL BEVEL
L
-06 C 3" 71 BEVEL BEVEL
D 3" 300 BEVEL BEVEL

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-05
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-05 1 1 A
A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 3 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6,
ASME B36.10M
0.2 M 3.5

2 3 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 160, 2 26.3
ASTM A350 LF2 CL1
3 3 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 2 2.0
TYPE R, SOLUTION ANNEALED SS316, MAX.
C
HARDNESS 140 HB, R31 ; R31
4 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 16 -
ASTM A320 GRADE L7, ASTM A194 GRADE 7L S3,
HOT DIP GALVANIZED AS PER ASTM A153
D
5 3 BALL VALVE, RJ, FLG., 900 LB, ASTM A350 LF2 2 118.0
CL1, API 6D, ASME B16.34

CON 384
T
0151. ON
E

-05
F

116
1 0
G
5 384
2 3 4 [1]
<A>
1
H

J
384 TOTAL WT. 149.7 KGS.

2 CUT LIST DATA

K
CON CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
T END-2
0151. ON NO. LENGTH NO. LENGTH
-07 A 3" 160 BEVEL BEVEL
2 3 4
L 5

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
N
2. PIPING TOLERANCES AS PER AFZE/STD/002 PART NOS.
3. NDT:
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-06
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-06 1 1 A
A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 3 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6,
ASME B36.10M
3.9 M 82.4

CON 2 3 ELBOW, 90 DEG. LR, BW, ASME B16.9, SCH 160, 4 15.3
T
0151. ON ASTM A420 WPL6
-06 392 3 3 ORIFICE FLANGE, WN, RJ, 900 LB., ASME B16.5, 1 13.2
SCH 160, ASTM A350 LF2 CL1
C <E> 2 4 3 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 160, 1 13.2
4 5 6 10
1 ASTM A350 LF2 CL1
5 3 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 2 2.0
9 TYPE R, SOLUTION ANNEALED SS316, MAX.
D
HARDNESS 140 HB, R31 ; R31
8 6 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 8 -
HOLD ASTM A320 GRADE L7, ASTM A194 GRADE 7L S3,
E HOT DIP GALVANIZED AS PER ASTM A153

705
<D> 1
F

G
5
255 6 2

H <C >1
2
5
J TOTAL WT. 125.9 KGS.
4

CON CUT LIST DATA

T
0151. ON CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K
818
<B> 1

NO. LENGTH NO. LENGTH END-2

-08 550 A 3" 321 BEVEL BEVEL
[1] B 3" 584 BEVEL BEVEL
L 3 5 <A>
1 1 C 3" 2321 BEVEL BEVEL
3 D 3" 472 BEVEL BEVEL
2
E 3" 163 BEVEL BEVEL
M

NOTES: LEGENDS :
2 1. ALL DIMENSIONS ARE IN MM, UOS.
N
2. PIPING TOLERANCES AS PER AFZE/STD/002 PART NOS.
3. NDT:
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-07
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

INSULATION. (HOT/COLD) N/A PWHT N/A 34665W-01-D-0151-07 1 A

ISSUE DATE DESCRIPTION DRN CHKD APRVD SCALE
NTS 1
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
B N 1
2
3
3
PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6,ASME B36.10M
PIPE, SMLS, BW, SCH 40S, ASTM A312 S31254/A358 S31254 0.4 M
2.5 M 52.8
3.6
CL1 S31254 /ASTM A358 S31254 CL1, ASME B36.10M
3 2 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6,ASME B36.10M 1.5 M 16.2
4 3X3 TEE EQUAL, BW, ASME B16.9, SMLS, SCH 160, ASTM A420 WPL6 1 4.5
9 5 3X2 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 160X160, ASTM A420 WPL6 1 1.5
C
6 3X2 TEE REDUCING, BW, ASME B16.9, SMLS, SCH 40S X 1 2.0

101 40S, ASTM A403 S31254 WP-S/WP-WX,

6 5 HOLD 7 3X2 TEE REDUCING, BW, ASME B16.9, SMLS, SCH 160 X 2 7.9

293 235 <C>

D 8 HOLD 5
160, ASTM A420 WPL6

324 1

786
8 3X3/4 WELDOFLANGE, RTJ, 1500LB, 160, ASTM A350 LF2 1 3.0
<D> CL1, MSS SP-97/ ASME B16.5, 150.000MM

<B> 1
11
1
1 12 9 3 ELBOW, 90 DEG. LR, BW, ASME B16.9, SCH 160,ASTM A420 WPL6 3 11.5
<E>
10 9
9 314 18 21 7 CON 10 3 ORIFICE FLANGE, WN, RJ, 900 LB., ASME B16.5,SCH 160, ASTM A350 LF2 CL1 1 13.2
T
E

8 0151. ON 11 3 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 160,ASTM A350 LF2 CL1 1 13.2

229 194
427
13 -
16 07
12 2 ORIFICE FLANGE, WN, RJ, 1500 LB., ASME B16.5, 1 10.9
521 10 15 SCH 160, ASTM A350 LF2 CL1
9 <F> 14 16 20
23
4
FLO HOLD
F

2 WE 13 2 FLANGE, WN, RJ, CL1500, ASME B16.5, SCH 40S, ASTM A182 F44 1 10.9
15 22 175 LWM 14 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 160, ASTM A350 LF2 CL1 2 21.8
14 175 8
1 EN TS
6 HOLD 15 3 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 TYPE R, 2 2.0
16 24 4 16 2 SOLUTION ANNEALED SS316, MAX. HARDNESS 140 HB, R31 ; R31 3 3.0
188

3
G 17 18 21 [1]
14 16 20 2 <A> 17 2 1 1.0

188 392 3 18 3/4 2 2.0

18 22
5 19 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 8 -

7
<G> 20 7/8X160 ASTM A1082 S32760, IMPACT TESTED. -101 DEG. C 16 -
H
19 1 CON
188
21 1 21 3/4X125 8 -
T
0151. ON 22 2 BLIND FLANGE, RJ, 1500 LB ASTM A350 LF2 CL1, 2 22.7
13 17 19 22 604 13 -11 23 3/4 BALL VALVE, RJ, FLG., 1500 LB, ASTM A350 LF2, CL 1 42.0
20
J
11 15 FLO HOLD 24 3/4 BLIND FLANGE, RJ, 1500 LB ASTM A350 LF2 CL1, ASME B16.5 1 2.8
169 <H> 12 16
WE
2 7 1 LWM TOTAL WT. 247.9 KGS.
E NTS
K
CON
T CUT LIST DATA
0151. ON
23

-09 CUT PC. SIZE CUT PC. END-1

NO. LENGTH END-2 CUT
NO.
PC. SIZE CUT PC. END-1
LENGTH END-2
L
A 2" 1458 BEVEL BEVEL F 3" 315 BEVEL BEVEL
B 3" 580 BEVEL BEVEL G 3" 214 BEVEL BEVEL
C 3" 786 BEVEL BEVEL H 3" 403 BEVEL BEVEL
M D 3" 401 BEVEL BEVEL
E 3" 90 BEVEL BEVEL
NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-08
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-08 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
(INS) DESCRIPTION QTY. Kgs. REMARKS
N NO.
1 3 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6, 0.3 M 6.0
B ASME B36.10M
2 3 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 160, 2 26.3
ASTM A350 LF2 CL1
3 3 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 3 3.0
TYPE R, SOLUTION ANNEALED SS316, MAX.
C
HARDNESS 140 HB, R31 ; R31
4 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 24 -
ASTM A320 GRADE L7, ASTM A194 GRADE 7L S3,
HOT DIP GALVANIZED AS PER ASTM A153
D
5 3 BALL VALVE, RJ, FLG., 900 LB, ASTM A350 LF2 1 59.0
CL1, API 6D, ASME B16.34

E
CON 384
T
0151. ON
-08
F
2

3 4
893
G 5
505
2 3 4 [1]
<A>
H
1

J TOTAL WT. 94.3 KGS.

CUT LIST DATA

1 CON CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

T
0151. ON NO. LENGTH NO. LENGTH END-2
-10 A 3" 281 BEVEL BEVEL
L
2 3 4

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-09
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-09 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
N 1 3 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6, 0.4 M 7.1
B ASME B36.10M
2 3 FLANGE, WN, RJ, 900 LB., ASME B16.5, SCH 160, 2 26.3
ASTM A350 LF2 CL1
3 3 GASKET, RJ, OCTAGONAL 900 LB, ASME B16.20 1 1.0
TYPE R, SOLUTION ANNEALED SS316, MAX.
C
HARDNESS 140 HB, R31 ; R31
4 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 8 -
ASTM A320 GRADE L7, ASTM A194 GRADE 7L S3,
HOT DIP GALVANIZED AS PER ASTM A153
D
5 3 BALL VALVE, RJ, FLG., 900 LB, ASTM A350 LF2 1 59.0
CON 384
T
0151. ON
CL1, API 6D, ASME B16.34

-09
E

5
F
2
944
2 3 4 <A>
1
G
556

3
H

PS
2
J [1] TOTAL WT. 94.4 KGS.
2
200 1 CUT LIST DATA
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 3" 332 BEVEL BEVEL
TP-
2
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
TEMPLATE: ISO SHEET-A3 Rev.B

N 2. PIPING TOLERANCES AS PER AFZE/STD/002 PART NOS.

3. NDT:
RT :
PT :
<> CUT PC. NOS.

PMI : WELD NOS.

4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
6. FOR PIPE SUPPORT DETAIL REFER DRAWING NUMBER 34665W-01-D-0179-01

0151-10 HOLD
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3
DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION
OUTSIDE ALDERLEY IS MAINLINE
PIPEWORK DETAIL - INLET PIPING
Telephone-+971 4 8042777
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION CUSTOMER SITE Fax-+971 4 8835295
PONTICELLI DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB HYDROTEST PRES. 0.5 barg HOLD GA DRG. NO. 34665W-01-D-0101-01 DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-10 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
B
N 1 2 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6,
ASME B36.10M
1.3 M 14.4

2 2X1 1/2 ECCENTRIC REDUCER, BW, ASME B16.9, SCH 160 X 1 0.7
160, ASTM A420 WPL6
3 2 ELBOW, 90 DEG. LR, BW, ASME B16.9, SCH 160, 2 2.7
ASTM A420 WPL6
C
4 2 ORIFICE FLANGE, WN, RJ, 1500 LB., ASME B16.5, 1 10.9
SCH 160, ASTM A350 LF2 CL1
5 1 1/2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 1 6.4
160, ASTM A350 LF2 CL1
D
CON 305 6 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0
T
0151. ON TYPE R, SOLUTION ANNEALED SS316, MAX.
-02 HARDNESS 140 HB, R24 ; R24
802 7 1 1/2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 2 2.0
E
CON
T
0151. ON
TYPE R, SOLUTION ANNEALED SS316, MAX.
7 2
-08 492 HARDNESS 140 HB, R20 ; R20
7 9 1 8 1X150 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 4 -
[1]
5 7 8 <A>
F
WASHER(S), ASTM A320 GRADE L7, ASTM A194
1 GRADE 7L S3, HOT DIP GALVANIZED AS PER ASTM A153

4 6 10 111 2
G 6 6MM OFFSET
9 1 1/2 CONTROL VALVE, RJ, FLG., 900 LB, ASTM A350 1 1.0

<C> 3 3 LF2 CL1

1 4
10 7/8X175 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 -
WASHER(S), ASTM A320 GRADE L7, ASTM A194
HOLD
H
GRADE 7L S3, HOT DIP GALVANIZED AS PER ASTM A153

1
<B>
J
5 285 TOTAL WT. 39.0 KGS.
6

CUT LIST DATA

3
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 2" 242 BEVEL BEVEL
B 2" 127 BEVEL BEVEL
L
C 2" 925 BEVEL BEVEL

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-11
PIPING SPEC. ED1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-11 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 2 PIPE, SMLS, BW, SCH 160, ASTM A333 GRADE 6,
ASME B36.10M
0.3 M 3.2

2 2X1 1/2 ECCENTRIC REDUCER, BW, ASME B16.9, SCH 160 X 1 0.7
160, ASTM A420 WPL6
3 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 1 10.9
160, ASTM A350 LF2 CL1
C
4 1 1/2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 1 6.4
160, ASTM A350 LF2 CL1
5 2 GASKET, RTJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0
TYPE R, , , R24 ; R24
D
6 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0
CON 371 TYPE R, SOLUTION ANNEALED SS316, MAX.
T
0151. ON HARDNESS 140 HB, R24 ; R24
E
-13 7 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 -
5 7 1
WASHER(S), ASTM A1082 S32760, IMPACT TESTED
-101 DEG. C
8 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 -
F 9 WASHER(S), ASTM A320 GRADE L7, ASTM A194
570
3 6 8 GRADE 7L S3, HOT DIP GALVANIZED AS PER ASTM A153
[1]
<A> 9 2 BALL VALVE, RJ, FLG., 1500 LB, ASTM A350 LF2 1 56.7
G 1 CL, API 6D, ASME B16.34

2
TOTAL WT. 79.8 KGS.
CON 4
J

T
2 0151. ON
6MM OFFSET -11 CUT LIST DATA
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 2" 286 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-12
PIPING SPEC. EM1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-12 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
N N
1 2 PIPE, SMLS, BW, SCH 40S, ASTM A312 S31254 2.8 M 15.1
B

O NT. O4 /ASTM A358 S31254 CL1 OR CL3, ASME B36.10M

C 1-1 2 2 PIPE, SMLS, BW, SCH 40S, ASTM A312 0.2 M 0.9
015 S31254/A358 S31254 CL1 S31254 /ASTM A358

907 1
4 5 6 S31254 CL1, ASME B36.10M
3 2 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 4 2.6
C
< A >1 40S, ASTM A403 S31254 WP-S/WP-WX,
[1] 4 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 2 21.8
40S, ASTM A182 F44, ASME B16.5
5 2 GASKET, RTJ, OCTAGONAL 1500 LB, ASME B16.20 2 2.0
D 3 2
TYPE R, , , R24 ; R24

3 6 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 16 -

3 HOLD WASHER(S), ASTM A1082 S32760, IMPACT TESTED
E -101 DEG. C

<B>
1 324
6
7
133 2
F

5 <C>
4
G 5

<D> 1
H

895
J TOTAL WT. 42.3 KGS.

8 CUT LIST DATA

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

338 NO. LENGTH NO. LENGTH END-2

9
A 2" 716 BEVEL BEVEL
<E> B 2" 1177 BEVEL BEVEL
L
3
1 C 2" 166 BEVEL BEVEL
10 D 2" 737 BEVEL BEVEL
E 2" 147 BEVEL BEVEL
CON
T
0151. ON
M

-12 NOTES: LEGENDS :

4 5 6 1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-13
PIPING SPEC. EM1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-13 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 2 PIPE, SMLS, BW, SCH 40S, ASTM A312 S31254
/ASTM A358 S31254 CL1 OR CL3, ASME B36.10M
0.3 M 1.7

2 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 2 21.8

40S, ASTM A182 F44
3 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 2 2.0
TYPE R, ANNEALED UNS N10276, MAX. HARDNESS
C
200HV, R24 ; R24
4 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 8 -
ASTM A1082 S32760, IMPACT TESTED -101 DEG. C

D
5 2 CHECK VALVE, RJ, FLG., 1500 LB, ASME A182 1 72.6
F44, API 6D, ASME B16.34

E
N
O N T. O5
C 1-1
2 015
F

HOLD
G
524 2 3

< A>1
[1 ]
H

J
368 TOTAL WT. 98.0 KGS.
1
CUT LIST DATA
N
T. O3 CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

O N
C 1-1 NO. LENGTH NO. LENGTH END-2
015 2 3 4 A 2" 300 BEVEL BEVEL
5
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0151-14
PIPING SPEC. EM1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

INSULATION. (HOT/COLD) N/A PWHT N/A 34665W-01-D-0151-14 1 A

ISSUE DATE DESCRIPTION DRN CHKD APRVD SCALE
NTS 1
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 2 PIPE, SMLS, BW, SCH 40S, ASTM A312 S31254
/ASTM A358 S31254 CL1 OR CL3, ASME B36.10M
0.5 M 2.4

2 2 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.7

40S, ASTM A403 S31254 WP-S/WP-WX,
3 2 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.7
40S, ASTM A403 S31254 WP-S/WP-WX, ASME B16.9
C
4 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 2 21.8
40S, ASTM A182 F44, ASME B16.5
5 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0
TYPE R, ANNEALED UNS N10276, MAX. HARDNESS

188
D
200HV, R24 ; R24
6 2 GASKET, RTJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0

[1] TYPE R, , , R24 ; R24

E 7 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 16 -

T. ON 1 2 ASTM A1082 S32760, IMPACT TESTED -101 DEG. C

N
CO 1-14
2

015 592
F
4 5 7 HOLD
<A>
1
G

H
3
3
4 6 7
4

TOTAL WT. 27.4 KGS.

N4 188
J

CUT LIST DATA

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 2" 434 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.

HOLD
0151-15
PIPING SPEC. EM1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD GA DRG. NO. DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0151-15 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
N 1 2 PIPE, SMLS, BW, SCH 40S, ASTM A312 0.4 M 1.7

0152-02
B S31254/A358 S31254 CL1 S31254 /ASTM A358

CONT. ON
5 S31254 CL1, ASME B36.10M
2 2 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.7
40S, ASTM A403 S31254 WP-S/WP-WX,
9 3 2 FLANGE, WN, RJ, 1500 LB., ASME B16.5, SCH 2 21.8
C
40S, ASTM A182 F44

371
4 3 4 6 4 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 3 3.0
TYPE R, ANNEALED UNS N10276, MAX. HARDNESS
200HV, R24 ; R24
D
5 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0
TYPE R, ANNEALED UNS N10276, MAX. HARDNESS
200HV R24
E 6 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 24 -
ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
HOLD

<B> 1
7 2 BLIND FLANGE, RJ, 1500 LB ASTM A182 F44, ASME B16.5 1 11.4
F
381
8 2 CHECK VALVE, RJ, FLG., 1500 LB, ASME A182 1 72.6
F44, API 6D, ASME B16.34

G
HOLD 9 2 BALL VALVE, RJ, FLG., 1500 LB, ASTM A182 F44, 1 56.7

J TOTAL WT. 168.7 KGS.

2 308
HOLD
2 [2]
<A>
CUT LIST DATA
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K
1 END-2
NO. LENGTH NO. LENGTH
1 368 HOLD A
B
2"
2"
117
190
BEVEL
BEVEL
BEVEL
BEVEL
L

3 4 6
8 FLU
SH/P
M URG
E
4 6
NOTES: LEGENDS :
7 1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0152-01
PIPING SPEC. BM1_300
EM1_900 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - INLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-01 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 2 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE,
SCH 40S, ASME B36.10/B36.19, ASTM A312
0.4 M 2.0

S31254/A358 S31254 CL1

2 4X2 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 10S X 1 0.8
40S, ASTM A403 S31254 WP-S/WP-WX
3 4 ELBOW, 45 DEG., LR, BW, ASME B16.9, BW, SCH 1 1.0

152
C
10S, ASTM A403 S31254 WP-S/WP-WX
5 2 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.7
40S, ASTM A403 S31254 WP-S/WP-WX

D
6 8 11 6 4 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, 1 12.1
1
613 3 ASTM A182 F44
45° [1] 7 2 FLANGE, WN, RJ, CL1500, ASME B16.5, SCH 40S, 1 10.9
ASTM A182 F44

109
109 N6
E 8 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 1 1.0
2
S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL

1 3 2 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER

<A>
& CENTERING RING 3.2MM
F
5 9 2 GASKET, RJ, OCTAGONAL 1500 LB, ASME B16.20 1 1.0
4 TYPE R, ANNEALED UNS N10276, MAX. HARDNESS
200HV R24
10 7/8X160 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0
187

G
WASHER(S), ASTM A1082 S32760, IMPACT TESTED
-101 DEG. C
5
11 3/4X125 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0
H
7 9 10 WASHER(S), ASTM A1082 S32760, IMPACT TESTED
CONT. ON

-101 DEG. C
0152-01

J TOTAL WT. 35.5 KGS.

CUT LIST DATA

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 2" 365 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0152-02
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN Telephone-+971 4 8042777

PONTICELLI
PERMISSION CUSTOMER SITE Fax-+971 4 8835295
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB HYDROTEST PRES. 0.5 barg HOLD GA DRG. NO. 34665W-01-D-0101-01 DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-02 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 4 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE,
SCH 10S, ASME B36.10/B36.19, ASTM A312
0.6 M 4.4

S31254/A358 S31254 CL1

. ON
240 T 2 4 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 2 4.0
N
CO 2-04 10S, ASTM A403 S31254 WP-S/WP-WX
015 3 4 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, 2 24.1
2
C
ASTM A182 F44
5 4 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 1 1.0
S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL
4
3 5 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER
D
& CENTERING RING 3.2MM
5 3/4X125 STUD BOLTS 2 HEAVY HEX NUTS, 125.00 LG, ASTM 16 2.0
<B> A1082 S32760, IMPACT TESTED -101 C
E
1
640
2
F 3

G
2

427
[1] <A> 1
J TOTAL WT. 34.3 KGS.

CUT LIST DATA

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 4" 186 BEVEL BEVEL
B 4" 332 BEVEL BEVEL
L

M
3 4 5

NOTES: LEGENDS :
N2

1. ALL DIMENSIONS ARE IN MM, UOS.

2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0152-03
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-03 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
N 1 4 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, 0.6 M 4.9

DEPRESSURISATION
B SCH 10S, ASME B36.10/B36.19, ASTM A312
S31254/A358 S31254 CL1
2 4X4 TEE EQUAL, BW, ASME B16.9, SCH 10S, ASTM A403 1 2.0
S31254 WP-S/WP-WX
3 4X3 TEE REDUCING, BW, ASME B16.9, SCH 10S x 10S, 1 1.9
C
ASTM A403 S31254 WP-S/WP-WX
7 4 4X2 TEE REDUCING, BW, ASME B16.9, SCH 10S x 40S, 3 5.6

193
13 15 ASTM A403 S31254 WP-S/WP-WX

857
5 4 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 2.0
10 11

161 216
D
10S, ASTM A403 S31254 WP-S/WP-WX

380
12 [2] 2 6 3X2 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 10S X 1 0.6
8 10 11 40S, ASTM A403 S31254 WP-S/WP-WX
3
E 7 4 4 7 4 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, ASTM A182 F44 3 36.1

5 8 2 FLANGE, WN, RF, CL300, ASME B16.5, SCH 40S,ASTM A182 F44 4 14.6
6 161
4

<A> 1
F
8 9 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 2 2.0
9 10 2 S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL 4 4.0
4

664
THERMICULITE, MICA OR EQUIVAENT, SS316 INNER
10 161 8 10 2 & CENTERING RING 3.2MM
G
1 240 11 5/8X100 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 16 2.0
<B> 8 [1]
ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
12 2 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 17.3
7 9 14 11
5
3 13 2 BLIND FLANGE, RF, CL300, ASME B16.5, SCH 40S, 1 3.7
H
CON
12 212 1 T
0152. ON
ASTM A182 F44

T . ON 6 -05
N
CO 2-03
015 212
260

13
J TOTAL WT. 96.3 KGS.
7
212
CUT LIST DATA
8 10 8
121 CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

391 A 4" 403 BEVEL BEVEL
B 4" 178 BEVEL BEVEL
L

193
M

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0152-04
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-04 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
B
N 1 4 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, SCH 10S, 0.3 M
ASME B36.10/B36.19, ASTM A312, S31254/A358 S31254 CL1
12.5

2 1 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, SCH 80S, 0.1 M 0.3
ASME B36.10/B36.19, ASTM A312, S31254/A358 S31254 CL1
3 4X1 WELD-O-LET, BW, MSS SP-97, 10S, ASTM A182 F44 1 0.2
5 8 13 4 4X3 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 10S X 1 0.7
C
305 5 4
10S, ASTM A403 S31254 WP-S/WP-WX
FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, ASTM A182 F44 1 12.0
6 3 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, ASTM A182 F44 1 8.2
CON
194 539
7 1 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.2
T
0152. ON
D
80S, ASTM A403 S31254 WP-S/WP-WX
8 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 2 2.0
-04 9 1 FLANGE, WN, RF, CL300, ASME B16.5, SCH 40S, 1 1.9
E
1 6 10 12 ASTM A182 F44

<B> 10 3 S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL 1 1.0

[1] 11 1 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER 1 1.0

F 8 13 15 7 3 12
& CENTERING RING 3.2MM
3/4X120 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0

16 4 3 CON
WASHER(S), ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
T 13 3/4X125 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 16 2.0
270 0152. ON
2
1 WASHER(S), ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
G
17 14 165 -06 14 5/8X90 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 2.0
4
<A> 2
WASHER(S), ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
102 15 4 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 65.4
H 16 1 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 5.5
17 1 BLIND FLANGE, RF, CL300, ASME B16.5, SCH 80S, 1 1.9
5
ASTM A182 F44
15 [2]

205
J
6 TOTAL WT. 110.0 KGS.
9 11 14 7
CUT LIST DATA
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 1" 80 BEVEL BEVEL
B 4" 265 BEVEL BEVEL
L

NOTES:
1. ALL DIMENSIONS ARE IN MM, UOS.
M
2. PIPING TOLERANCES AS PER AFZE/STD/002
3. NDT:
RT :
PT : LEGENDS :
PMI :
4. HARDNESS TEST : XXX
TEMPLATE: ISO SHEET-A3 Rev.B

N
5. PAINT SYSTEM : XXX PART NOS.

HOLD <> CUT PC. NOS.

WELD NOS.
P
[ ] SPOOL NOS.

0152-05
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-05 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
(INS) DESCRIPTION QTY. Kgs. REMARKS
N NO.
1 4 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, SCH 10S, 0.3 M 1.8
B 2 1 ASME B36.10/B36.19, ASTM A312 S31254/A358 S31254 CL1 0.1 M 0.3
3 4X3 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 10S X 1 0.8
10S, ASTM A403 S31254 WP-S/WP-WX

CON 4 4X1 WELD-O-LET, BW, MSS SP-97, 10S, ASTM A182 F44 1 0.2
T 318
0152. ON 5 4 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 2.0
C
-05 10S, ASTM A403 S31254 WP-S/WP-WX
184 6 1 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.2
80S, ASTM A403 S31254 WP-S/WP-WX
16 7 4 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, ASTM A182 F44 1 12.1
D
7 8 3 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, ASTM A182 F44 1 8.2
8 11 17
9 1 FLANGE, WN, RF, CL300, ASME B16.5, SCH 80S, ASTM A182 F44 1 1.9
8 105 870 10 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 1 1.0
E <B> 11 3 S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL 1 1.0
3 1 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER
& CENTERING RING 3.2MM
12 1 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS S32750/60 2 2.0
F
WINIDING 4.8MM THK, FILLER MATERIAL THERMICULITE,
3 4 MICA OR EQUIVAENT, SS316 INNER & CENTERING RING 3.2MM

4
259 13 5/8X90 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 WASHER(S), 8 2.0
ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
G
14 1 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 5.5
15 1 BLIND FLANGE, RF, CL300, ASME B16.5, SCH 80S, ASTM A182 F44 1 1.9
16 3 CONTROL VALVE, RF, FLG., CL300, ASTM A182 F44 1 1.0
H
17 3/4X120 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 1.0
<A> 2 5 WASHER(S), ASTM A1082 S32760, IMPACT TESTED -101 DEG. C
2
STUDBOLTS WITH 2 HEAVY HEX NUTS, 2
[1]
1
205 7 10
N TOTAL WT. 41.3 KGS.
T. O7
J

ON
C 2-0 240
015 CUT LIST DATA
270 CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

102 5 NO. LENGTH NO. LENGTH END-2

165 A
B
1"
4"
80
210
BEVEL
BEVEL
BEVEL
BEVEL
15
[2]
L
6
6
14
M
9 12 13

NOTES: LEGENDS :
12 13 1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N PART NOS.
3. NDT:
RT : <> CUT PC. NOS.
PT :
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0152-06
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-06 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
N 1 4 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, 0.4 M
SCH 10S, ASME B36.10/B36.19, ASTM A312
4.9

7 9
B

11 9
T . ON S31254/A358 S31254 CL1

CON2-06
2 1 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, 0.2 M 0.7

549
SCH 80S, ASME B36.10/B36.19, ASTM A312

C
12 015 3 4X1
S31254/A358 S31254 CL1
WELD-O-LET, BW, MSS SP-97, 10S, ASTM A182 F44 1 0.2
5 7 9 4 1 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 1 0.2
80S, ASTM A403 S31254 WP-S/WP-WX
D 1 305 5 4 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S,
ASTM A182 F44
2 24.0

1] 355
2 6 1 FLANGE, WN, RF, CL300, ASME B16.5, SCH 80S, 1 1.8
3 > [
<B
ASTM A182 F44
HOLD 7 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 3 3.0

240
E

3 1 HOLD
8 1 S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL 2 2.0
5 7 9 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER

11
4 165 14 & CENTERING RING 3.2MM

102
F
9 3/4X125 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 24 3.0

309
WASHER(S), ASTM A1082 S32760, IMPACT TESTED
HOLD
<A>
-101 DEG. C

T . ON 5 10 5/8X90 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 8 2.0

CON2-08 304
235
G
2 WASHER(S), ASTM A1082 S32760, IMPACT TESTED
13 8 10
015
-101 DEG. C
11 4 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 2 130.7
6
H 12 4 CHECK VALVE, RF, FLG., CL300, ASTM A182 F44 1 84.0
13 1 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 5.4

4 270 6 8 10 14 1 BLIND FLANGE, RF, CL300, ASME B16.5, SCH 80S, 1

ASTM A182 F44
1.8

J TOTAL WT. 304.8 KGS.

CUT LIST DATA

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 1" 110 BEVEL BEVEL
B 4" 374 BEVEL BEVEL
L

NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N
3. NDT: PART NOS.
RT :
PT : <> CUT PC. NOS.
PMI :
4. HARDNESS TEST : XXX WELD NOS.
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
HOLD
0152-07
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-07 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS

B
N 1 4 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE,
SCH 10S, ASME B36.10/B36.19, ASTM A312
3.4 M 28.4

S31254/A358 S31254 CL1

2 4X4 TEE EQUAL, BW, ASME B16.9, SCH 10S, ASTM A403 6 12.0
4 5 6 7 S31254 WP-S/WP-WX
26 3 4 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 4 7.9
C
10S, ASTM A403 S31254 WP-S/WP-WX
2

193
4 5 6 4 4 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, 8 96.2
7
ASTM A182 F44
1
<E>
15 5 4 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 8 8.0
D 16
13 14 S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL
4 5 6

193
7 375 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER

1 2 & CENTERING RING 3.2MM

<D>
12
E 6 3/4X125 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 64 8.0
11 WASHER(S), ASTM A1082 S32760, IMPACT TESTED

602
10
4 5 6

<F> 1
193

409
7 -101 DEG. C
2
375
7 4 BLIND FLANGE, RF, CL300, ASME B16.5, SCH 10S, 6 76.2
1
<C>
9
F
ASTM A182 F44
7 8 8 4 BALL VALVE, RF, FLG., CL300, ASTM A182 F44 1 65.4
17
4 5 6
193

7 375 4 5 6 259
2 0
1 3 0
192 24 238 966
<B> ON
G 6
N T. 18
4 5 CO52-07 122 21
2 19
375 01 2
193

7 3
4 5 6
2 3 <G>
1 25 1 1 305
<H>
H

<A>
3 20
1 2 24 23 455
<I> 22
PS3
[1]
240

1
J
422 421 3 658 TOTAL WT. 301.9 KGS.
3 TP-0
4
4 5 6 8 CUT LIST DATA
CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

A 4" 162 BEVEL BEVEL H 4" 1862 BEVEL BEVEL
B 4" 162 BEVEL BEVEL I 4" 113 BEVEL BEVEL
L
C 4" 162 BEVEL BEVEL
D 4" 162 BEVEL BEVEL
E 4" 162 BEVEL BEVEL
M F 4" 148 BEVEL BEVEL
G 4" 463 BEVEL BEVEL
NOTES: LEGENDS :
1. ALL DIMENSIONS ARE IN MM, UOS.
2. PIPING TOLERANCES AS PER AFZE/STD/002
TEMPLATE: ISO SHEET-A3 Rev.B

N PART NOS.
3. NDT:
RT :
PT :
< > CUT PC. NOS.
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.
6. FOR PIPE SUPPORT DETAIL REFER DRAWING NUMBER 34665W-01-D-0179-01

0152-08 HOLD
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-08 1 1 A
 A3 ISO SHEET-A3 Rev.B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

A
IF IN DOUBT ASK DO NOT SCALE

MATERIAL LIST
PART SIZE WT.
NO. (INS) DESCRIPTION QTY. Kgs. REMARKS
N 1 3 PIPE, SMLS/WELDED, EFW 100% RADIOGRAPHY, BE, 2.7 M 17.2

CONT. ON
B SCH 10S, ASME B36.10/B36.19, ASTM A312

0152-04
8 S31254/A358 S31254 CL1
10 2 3X2 CONCENTRIC REDUCER, BW, ASME B16.9, SCH 10S X 1 0.6
40S, ASTM A403 S31254 WP-S/WP-WX
3 3 ELBOW, 45 DEG., LR, BW, ASME B16.9, BW, SCH 1 0.7
6 8 9

267
C
10S, ASTM A403 S31254 WP-S/WP-WX
1
4 3 ELBOW, 90 DEG. LR, BW, ASME B16.9, BW, SCH 4 4.6
2
10S, ASTM A403 S31254 WP-S/WP-WX
2
5 3 FLANGE, WN, RF, CL300, ASME B16.5, SCH 10S, 1 8.2
D
ASTM A182 F44

[1] <A> 1
6 2 FLANGE, WN, RF, CL300, ASME B16.5, SCH 40S, 1 3.7

1055
785
ASTM A182 F44
E 7 3 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 1 1.0
S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL
7
16 3 THERMICULITE, MICA OR EQUIVAENT, SS316 INNER

45° 3 & CENTERING RING 3.2MM

F
8 2 GASKET, SPIRAL WOUND, CL300, ASME B16.20, UNS 2 2.0
S32750/60 WINIDING 4.8MM THK, FILLER MATERIAL

118
0 4
145 5 118 4
THERMICULITE, MICA OR EQUIVAENT, SS316 INNER
& CENTERING RING 3.2MM
G
4 1
<B>
9 5/8X100 STUDBOLTS WITH 2 HEAVY HEX NUTS, 2 16 2.0
WASHER(S), ASTM A1082 S32760, IMPACT TESTED
6 -101 DEG. C
H 10 2 GLOBE VALVE, RF, FLG., CL300, ASTM A182 F44 1 37.7

J TOTAL WT. 77.3 KGS.

582

CUT LIST DATA

<C> 1

CUT PC. SIZE CUT PC. END-1 END-2 CUT PC. SIZE CUT PC. END-1
K

NO. LENGTH NO. LENGTH END-2

8 A 3" 570 BEVEL BEVEL
B 3" 1218 BEVEL BEVEL
L
C 3" 351 BEVEL BEVEL
756 D 3" 525 BEVEL BEVEL
9
8 N7
4 <D> - 279
M 1 196 ASA
BI- V

10
NOTES: LEGENDS :
5 7 9 1. ALL DIMENSIONS ARE IN MM, UOS.
11
TEMPLATE: ISO SHEET-A3 Rev.B

N 2. PIPING TOLERANCES AS PER AFZE/STD/002 PART NOS.

3. NDT:
4 RT : <> CUT PC. NOS.
PT :
PMI : WELD NOS.
4. HARDNESS TEST : XXX
P
5. PAINT SYSTEM : XXX [ ] SPOOL NOS.

0152-09 HOLD
PIPING SPEC. BM1_300 NDT. (RT,MPI,DPI,PMI) REF. NOTE-3 DRG TITLE
SAND TREATMENT PACKAGE (ASABI-A-3401)
DESIGN DATA

DESIGN TEMPERATURE 0 °C / 93 °C PAINT SPEC. REF. NOTE-5 C COPYRIGHTS RESERVED

REPRODUCTION OR DISTRIBUTION MAINLINE PIPEWORK DETAIL - OUTLET PIPING
OUTSIDE ALDERLEY IS
DESIGN PRESSURE FV/141.3 barg P&ID DRG. NO. 34665W-01-D-0100-01 FORBIDDEN WITHOUT WRITTEN
PERMISSION
Telephone-+971 4 8042777
Fax-+971 4 8835295

HYDROTEST PRES. GA DRG. NO. 34665W-01-D-0101-01

CUSTOMER
PONTICELLI SITE
DBN PWM A AND B LOCATIONS
A 15.10.22 ISSUED FOR CONSTRUCTION KP AT AB 0.5 barg HOLD DRG.No. SHT REV.

ISSUE DATE DESCRIPTION DRN CHKD APRVD INSULATION. (HOT/COLD) N/A PWHT N/A SCALE
NTS 34665W-01-D-0152-09 1 1 A