Professional Documents
Culture Documents
Tire and Rim (Front) - Remove and Install - 2
Tire and Rim (Front) - Remove and Install - 2
Page 1 of 4
Shutdown SIS
Previous Screen
i07682751
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
9U-7536 Lift Stand 2
447-0910 Electric Hydraulic Pump (115 V) 1
A(1)
447-0911 Electric Hydraulic Pump (230 V) 1
9U-7531 Tube As 2
OR
A1 504-9826 Lift Gp (50/60 Hz)(2) 2
504-9827 Lift Gp (50/60 Hz)(3) 2
B 425-0952 Wheel Chock 4
(1)
Use Tooling (A) or (A1) based on requirements.
(2)
Operating-voltage (380-500V)
(3)
Operating-voltage (180-300V)
Start By:
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022
Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988... Page 2 of 4
Ensure that the machine and tire and or wheel assembly are properly
supported at all times.
Improper procedures that are used to remove and install tires and or
wheel assemblies can result in personal injury or death.
Illustration 1 g01137553
2. Place Tooling (B) in front of the rear tires and behind the rear tires, as shown.
Illustration 2 g03563036
For Tooling (A)
4. Use Tooling (A) to raise the front of the machine until the tires are off the ground. Lock
Tooling (A) in position.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022
Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988... Page 3 of 4
Illustration 3 g06394417
Typical example
For Tooling (A1)
5. Position Tooling (A1) under the front frame, as shown. Refer to Tool Operating Manual,
NEHS1328, "Lift Group (Stand - 60 Ton)" for more information on Tooling (A1).
6. Use Tooling (A1) to raise the front of the machine until the tires are off the ground.
Illustration 4 g00367814
Typical Example
7. Attach a suitable lifting device to tire (1), as shown. The combined weight of the tire and of
the rim is approximately 1590 kg (3500 lb).
Note: Do not damage the valve stem when the tire and the rim are removed.
Installation Procedure
1. Install tire and rim (1) in the reverse order of removal.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022
Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988... Page 4 of 4
a. Tighten bolts (2) to a torque of 570 ± 80 N·m (420 ± 60 lb ft). Turn bolts (2) an extra
60° ± 5°.
Copyright 1993 - 2022 Caterpillar Inc. Sun Apr 24 21:04:42 EST 2022
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022