Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Technical Datasheet For: Epsotechpv Ra1 D6: Overview and Structure

    Uploaded by

    Alexandre Bernelin
    epsotech PV RA1 D6 is a single layer PVC material designed for aircraft interiors. It has good mechanical properties like tensile strength and elongation. It meets various industry standards for burning behavior and smoke/toxicity. It has good resistance to chemicals like alcohol and acids. Recommended thermoforming temperature is 170-210°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Datasheet For: Epsotechpv Ra1 D6: Overview and Structure

    Uploaded by

    Alexandre Bernelin
    28 views2 pages
    epsotech PV RA1 D6 is a single layer PVC material designed for aircraft interiors. It has good mechanical properties like tensile strength and elongation. It meets various industry standards for burning behavior and smoke/toxicity. It has good resistance to chemicals like alcohol and acids. Recommended thermoforming temperature is 170-210°C.

    Original Title

    PV RA1 D6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    epsotech PV RA1 D6 is a single layer PVC material designed for aircraft interiors. It has good mechanical properties like tensile strength and elongation. It meets various industry standards for burning behavior and smoke/toxicity. It has good resistance to chemicals like alcohol and acids. Recommended thermoforming temperature is 170-210°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views2 pages

    Technical Datasheet For: Epsotechpv Ra1 D6: Overview and Structure

    Uploaded by

    Alexandre Bernelin
    epsotech PV RA1 D6 is a single layer PVC material designed for aircraft interiors. It has good mechanical properties like tensile strength and elongation. It meets various industry standards for burning behavior and smoke/toxicity. It has good resistance to chemicals like alcohol and acids. Recommended thermoforming temperature is 170-210°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Technical Datasheet for: epsotechPV RA1 D6

    Overview and Structure


    epsotech PV RA1 D6 is a single layer PVC engineered especially for aircraft interiors.

    Typical Physical Properties

    Property Value Unit Standard Test Method

    GENERAL PROPERTIES:

    Density* 1.58 g/cm3 ISO 1183 -

    MECHANICAL PROPER|TIES:

    Tensile E-Modulus 3667 MPa ISO 527 23oC

    Tensile Strength at Break 25 MPa ISO 527 23oC

    Elongation at break 13.7 % ISO 527 23oC

    Tensile Yield 31.7 MPa ISO 527 23oC

    THERMAL PROPERTIES:
    o
    VICAT softening Point 70 C ISO 306 B/50

    BURNING BEHAVIOUR:

    CS/FAR 25.853 PASS (a)(1)(i) 60 second vertical

    CS/FAR 25.853 PASS (a)(1)(ii) 12 second vertical

    CS/FAR 25.853 PASS (IV) Heat Release

    CS/FAR 25.853 PASS (V) Smoke Density Flaming


    AITM
    ABD 0031 PASS ** Toxic Gas Emissions
    3.0005
    MISCELLANEOUS:

    Mould Shrinkage 0.5 - 0.7 % - General test method


    o
    Thermoforming Temperature 170 – 210 C Heater type dependant

    Unless otherwise stated, products are tested at a typical thickness of 3mm

    *
    The density quoted should only be used as a guide. This value can change depending upon the type and quantity of pigments or additives
    used.
    ** Toxic Gas Emissions pass except HCL, HF

    Supplemental Information
    Chemical Contact and cleaning

    Reagent Chemical resistance Reagent Chemical resistance

    Acid – (Weak) Good Butter Excellent


    Acid – (Strong) Good Coffee Excellent
    Alcohol Good Detergent Excellent
    Anti-freeze Excellent Diesel Good
    Base (Weak) Excellent Foodstuffs Good
    Base (Strong) Excellent Lubricating Oil Very Good
    Battery Acid Good Petrol Good

    Chemical resistance is influenced by many factors, including concentration, temperature, exposure time and material stress.
    Therefore the data should only be used as a guide.
    Most common mild soaps or detergents dissolved in warm water can be used to effectively clean general dirt and surface
    contaminants, but in all cases should be objectively tested. Abrasive products will damage the surface.

    Storage and Drying


    Long storage times in humid conditions may require a product to be dried, e.g. 80oC for 2 hours +1hr per additional mm of
    thickness. Space must be left between sheets to allow correct drying.

    Dimensional Tolerances
    Standard tolerances are subject to the local standard tolerance set. Extra tolerance requirements may be possible on request
    and by special agreement

    Product Modification
    Product code nomenclature takes in to account selected primary features of a product. The suffix may indicate a primary additional
    functionality, however, further multiple modifications are almost always possible and may be agreed upon and specified prior to our
    technical and commercial offer. Such enhancements are a normal part of our service capability and they do not affect the general
    characteristics listed in technical datasheets.

    Disclaimer:
    Suitability for use - epsotech sells thermoplastic sheet and monofilament products. The above information describes the basic features of our
    products. However, these are largely influenced by their specific application, the application environment, final processing and the customer’s
    intended usage. We recommend that in each case the suitability of our products for the intended usage is thoroughly listed and evaluated. We do not
    give any warranty or guarantee for any particular quality required by a customer or for the usability of our products in any particular customer
    environment. epsotech will under no circumstance be liable for wear and tear, for damages resulting from disregard of product instructions – including
    those contained in this technical data sheet – operating instructions, disregard of other instructions, misuse, alteration or unauthorised repairs or
    processing. All deliveries shall be subject to the Terms and Conditions of the Seller.
    Right to make changes – epsotech reserves the right to make changes to information published in this document, including without limitation
    specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the
    publication hereof. The latest version of a published datasheet shall be available for download from the epsotech website, or the subsidiary websites
    of Carolex SAS and Axipack SAS, depending on the product range.
    Limited warranty and liability - Information in this document is believed to be accurate and reliable. However, epsotech and/or its subsidiaries do
    not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for
    the consequences of use of such information. epsotech takes no responsibility for the content in this document if provided by an information source
    outside of epsotech. In no event shall epsotech be liable for any indirect, incidental, punitive, special or consequential damages (including - without
    limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or
    not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that
    the customer might incur for any reason whatsoever, aggregate and cumulative liability by epsotech towards customers for the products described
    herein shall be limited in accordance with the terms and conditions of commercial sale of epsotech.

    Edition 1, September 2019


    Published by Epsotech Holding GmbH, Im Reinfeld 2, Jülich Kirchberg, 52428 Germany

    You might also like