Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    POM KEPITAL F30-03 en

    Uploaded by

    AthonioMourinho
    This document provides information about a standard grade polyoxymethylene called POM KEPITAL F30-03 for general injection molding. It lists physical, thermal, mechanical, electrical, and other properties as well as recommended injection molding conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    POM KEPITAL F30-03 en

    Uploaded by

    AthonioMourinho
    20 views2 pages
    This document provides information about a standard grade polyoxymethylene called POM KEPITAL F30-03 for general injection molding. It lists physical, thermal, mechanical, electrical, and other properties as well as recommended injection molding conditions.

    Original Title

    POM_KEPITAL_F30-03_En

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a standard grade polyoxymethylene called POM KEPITAL F30-03 for general injection molding. It lists physical, thermal, mechanical, electrical, and other properties as well as recommended injection molding conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views2 pages

    POM KEPITAL F30-03 en

    Uploaded by

    AthonioMourinho
    This document provides information about a standard grade polyoxymethylene called POM KEPITAL F30-03 for general injection molding. It lists physical, thermal, mechanical, electrical, and other properties as well as recommended injection molding conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    POM | KEPITAL F30-03 | Standard grade

    - A standard unfilled(low viscosity) grade for general injection molding

    - Suitable for multi-cavity molds and thin-walled parts

    Physical properties Test Standard Unit Value


    3
    Density ISO 1183 g/cm 1.41

    Melt flow rate ISO 1133 g/10min 27


    Water absorption(23 ℃, 50 %RH) ISO 62 % 0.2

    Thermal properties Test Standard Unit Value


    Heat deflection temperature(1.8 MPa) ISO 75 ℃ 101
    Flammability UL 94 – HB
    Melting point ISO 11357 ℃ 165
    Coefficient of linear thermal expansion ISO 11359 X 10-5/℃ 12

    Mechanical properties Test Standard Unit Value


    Tensile modulus ISO 527 MPa 2,850
    Tensile stress ISO 527 MPa 65
    Tensile strain at yield ISO 527 % 8
    Nominal strain at break ISO 527 % 25
    Flexural strength ISO 178 MPa 90
    Flexural modulus ISO 178 MPa 2,700
    2
    Charpy impact strength(Notched) @ 23℃ ISO 179/1eA kJ/m 5.5

    Charpy impact strength(Notched) @ -30℃ ISO 179/1eA kJ/m2 5.0

    Electrical properties Test Standard Unit Value


    Surface resistivity IEC 60093 Ω 1x1016

    Volume resistivity IEC 60093 Ω/ cm 1x1014

    Dielectric strength IEC 60243-1 kV/mm 19

    Other Test Standard Unit Value


    Mold shrinkage(flow direction, t = 2 mm) ISO 294-4 % 2.0

    General information Test Standard Unit Value


    Polymer abbreviation ISO 1043 - POM

    Revision No : 8 (2020-04-03)

    KOREA ENGINEERING PLASTICS CO., LTD - www.kepital.com Print Date : 2021-05-10


    Injection molding condition

    Pre-drying (Suggested max. moisture : 0.1%)


    It is recommend to dry material at 80℃ ~ 90℃(176℉ ~ 194℉) for 3 h ~ 4 h if necessary.

    Temperature
    Mold temperature : 60 ℃ ~ 80 ℃(140 ℉ ~ 176 ℉)
    Barrel temperature : 170 ℃ ~ 210 ℃(338 ℉ ~ 410 ℉)

    Mold Bn(Nozzle) B3(Metering) B2(Compression) B1(Feeding) Hopper


    60 ~ 80 ℃ 180 ~ 210 ℃ 190 ~ 200 ℃ 180 ~ 190 ℃ 170 ~ 180 ℃ 60 ~ 80 ℃
    140 ~ 176 ℉ 356 ~ 410 ℉ 374 ~ 392 ℉ 356 ~ 374 ℉ 338 ~ 356 ℉ 140 ~ 176 ℉

    Plastification
    Screw speed : 150 mm/s ~ 200 mm/s
    Back pressure : Maximum 20 bar

    Contact information
    Headquarters KEP China
    14th Floor, OCI BLDG., Sogong-ro, Jung-gu Seoul, 04532, Room T2-903C, No.2 building. SOHO Tianshan Plaza.
    Republic of Korea No.1717 Tianshan Rd. Changning District. Shanghai. China
    Tel 82-2-728-7441 ~ 8, Telefax 82-2-714-9235 Tel +86 21 6237-1972, Telefax +86 21 6237-1803

    Disclaimer
    Notice to users : The information contained in this data sheet is based on our current knowledge and experience,
    so it may change as new knowledge and experience becomes available. This information is based on only above-mentioned
    product produced in Korea Engineering Plastics Co., Ltd. (“KEP”) through relevant test methods and conditions
    and doesn’t relate to any products made of this product with the inclusion of other additives, such as
    processing aids or colorants. This information should not be construed as a promise or guarantee of specific properties
    of this product described or its suitability for a particular application, so users make their own determination as to
    its suitability to their purposes prior to use this product. It is the sole responsibility of the users to investigate
    whether any existing patents are infringed by the use of this product. This product is not intended for use in medical
    and dental implants and users should meet all safety and health standards. KEP makes no warranty and assumes no liability
    in connection with any use of this information.

    KOREA ENGINEERING PLASTICS CO., LTD - www.kepital.com Print Date : 2021-05-10

    Powered by TCPDF (www.tcpdf.org)

    You might also like