Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    EGT330F101

    Uploaded by

    ghared saleh
    ROOM TEMP. SENSOR

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EGT330F101

    Uploaded by

    ghared saleh
    94 views3 pages
    ROOM TEMP. SENSOR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ROOM TEMP. SENSOR

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    94 views3 pages

    EGT330F101

    Uploaded by

    ghared saleh
    ROOM TEMP. SENSOR

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    36.

    027

    EGT 330...335: Room-temperature sensor


    How energy efficiency is improved
    Accurate detection of room temperature for energy-efficient control of HVAC systems and monitoring
    energy consumption.
    Areas of application
    Temperature detection for heating and air conditioning systems in dry rooms, for example residential,
    office and business premises.
    Features
    • Passive measured value acquisition
    • Temperature detection in dry rooms
    • Versions with setpoint adjuster, presence button and status LED
    • Parameterise with SAUTER EY3600 or a SAUTER Flexotron controller (EGT 332) T
    • Integrated resistor (EGT 333) which, in combination with Equitherm controllers, corrects the
    setpoint with or without room temperature influence Y04579

    Technical description
    • With nickel thin-film sensor as per DIN 43760
    • Housing made of pure white, fire-retardant thermoplastic (RAL 9010)
    • Cable inlet at rear, screw terminals for wires up to 1,5 mm²
    Type Nominal value Adjuster Remarks Measuring Weight
    at 0 °C range °C kg
    EGT 330 F021 200 Ω – – –20...60 0.1
    EGT 330 F051 500 Ω – – –20...60 0.1
    EGT 330 F101 1000 Ω – – –20...60 0.1
    EGT 332 F101 1000 Ω 2.5 kΩ for Flexotron 2) +DDC –20...60 0.1
    EGT 333 F101 1000 Ω 1) ±4K for Equitherm+RDT7 . . –20...60 0.1
    With occupancy key, 3 LEDs
    EGT 335 F101 1000 Ω 2,5 kΩ for DDC –20...60 0.1

    Resistance values as per DIN 43760 Degree of protection IP 30 (EN 60529)


    Tolerance at 0 °C ± 0,4 K
    Average temp. coefficient 0,00618 K-1 Wiring diagram
    Self-heating 0.17 K/mW EGT 330 A01632
    EGT 332, 335 A06951
    Time behaviour in still air EGT 333 A06952
    Dead time 50 s Dimension drawing M07634
    Time constant 18 min Fitting instructions MV 505479
    EGT 333 MV 505530

    Accessories
    0303124 000* Recessed junction box
    0313347 001* Intermediate cover plate for 76 × 76
    0369829 100 Neutral housing, pure white
    *) Dimension drawing or wiring diagram are available under the same number

    1) 1000 Ω when correction knob is in middle position


    2) Not for flexotron 100

    Operation
    The resistance of the nickel measuring resistor changes in relation to the temperature. The
    temperature coefficient is always positive, i.e. the resistance increases as the temperature rises.
    Table of values (DIN 43760). The elements are interchangeable within the bounds of the given
    tolerances.
    EGT 332
    In addition to the measuring resistor, a potentiometer of 2.5 kΩ is fitted. In conjunction with DDC or a
    Flexotron controller, the setpoint can be universally parameterised.
    EGT 333
    A potentiometer of 47 Ω for varying the measured value by ± 4 K – is fitted in series to the resistor.
    Depending on the connection to an Equitherm controller, the setpoint can be corrected either with or
    without influencing the room temperature.
    EGT 335
    As EGT 332, but with occupancy key and a yellow LED for operation plus two green LEDs for status
    for ½ and 1. Bridges BR1 and BR2 should be opened if the sensor's earth should be separated.
    Contacts S1 become potential-free if BR3 is opened.

    Sauter Components 7136027003 06


    36.027 EGT 330...335

    Engineering and fitting notes


    The temperature sensor should not be exposed directly to sources of heat, the effects of radiation or
    draughts. With a temperature difference of 5 K between wall and air at a distance of approx. 1 m,
    there is an error of 1 K.
    Additional technical data
    CE conformity as per
    EMC Directive 2004/108/EC EN 61000-6-1/ EN 61000-6-2
    EN 61000-6-3/ EN 61000-6-4

    Wiring diagram

    EGT 330 EGT 332 (EGT 335) EGT 333

    1 2
    4 3 0 1 2

    T
    T
    Ni1000

    0% Xs

    A01632

    A06952a

    Dimension drawing

    Sauter Components 7136027003 06


    EGT 330...335 36.027

    Accessories

    303124 313347 60
    70,5
    5

    2
    3,
    Ø 60
    65

    60
    3,7

    85
    2
    4,
    7
    53

    51
    77
    9

    M00815 M07579

    Printed in Switzerland
    Right of amendment reserved
    N.B.: A comma between cardinal
    numbers denotes a decimal point
    © Fr. Sauter AG, CH-4016 Basle
    Sauter Components 7136027003 06

    You might also like