Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    Crawler-Mounted-Feeder-Breaker Brochure NA Imperial Digital

    Uploaded by

    Bhargav Chakraborty
    Crawler-mounted feeder-breakers are designed to efficiently crush and convey material in underground mining operations. They allow for complete size reduction of friable minerals and can process loads from shuttle cars at rates up to 1200 tons per hour. Crawler-mounted feeder-breakers utilize heavy-duty tracks, a breaker roll, conveyor system, and tail pulley to drag material along steel decks, crush it to a uniform size, and meter it continuously onto conveyor belts for removal from the mining face. They are engineered with safety and maintenance in mind, featuring programmable controls, easy access for repairs, and mobility to incorporate moving belt lines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Crawler-Mounted-Feeder-Breaker Brochure NA Imperial Digital

    Uploaded by

    Bhargav Chakraborty
    60 views2 pages
    Crawler-mounted feeder-breakers are designed to efficiently crush and convey material in underground mining operations. They allow for complete size reduction of friable minerals and can process loads from shuttle cars at rates up to 1200 tons per hour. Crawler-mounted feeder-breakers utilize heavy-duty tracks, a breaker roll, conveyor system, and tail pulley to drag material along steel decks, crush it to a uniform size, and meter it continuously onto conveyor belts for removal from the mining face. They are engineered with safety and maintenance in mind, featuring programmable controls, easy access for repairs, and mobility to incorporate moving belt lines.

    Original Title

    Crawler-Mounted-Feeder-Breaker_Brochure_NA_Imperial_Digital

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Crawler-mounted feeder-breakers are designed to efficiently crush and convey material in underground mining operations. They allow for complete size reduction of friable minerals and can process loads from shuttle cars at rates up to 1200 tons per hour. Crawler-mounted feeder-breakers utilize heavy-duty tracks, a breaker roll, conveyor system, and tail pulley to drag material along steel decks, crush it to a uniform size, and meter it continuously onto conveyor belts for removal from the mining face. They are engineered with safety and maintenance in mind, featuring programmable controls, easy access for repairs, and mobility to incorporate moving belt lines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views2 pages

    Crawler-Mounted-Feeder-Breaker Brochure NA Imperial Digital

    Uploaded by

    Bhargav Chakraborty
    Crawler-mounted feeder-breakers are designed to efficiently crush and convey material in underground mining operations. They allow for complete size reduction of friable minerals and can process loads from shuttle cars at rates up to 1200 tons per hour. Crawler-mounted feeder-breakers utilize heavy-duty tracks, a breaker roll, conveyor system, and tail pulley to drag material along steel decks, crush it to a uniform size, and meter it continuously onto conveyor belts for removal from the mining face. They are engineered with safety and maintenance in mind, featuring programmable controls, easy access for repairs, and mobility to incorporate moving belt lines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CRAWLER-MOUNTED FEEDER-BREAKERS

    CRAWLER-MOUNTED FEEDER-BREAKERS
    Crawler-Mounted Feeder-Breakers are designed to be an integral part of your mining FEATURES AND BENEFITS
    operation. They allow for all parts of an underground room and pillar system to be more
    efficient at material recovery, hauling, crushing and conveying. Crawler-Mounted Feeder-
    Breakers provide surge capacity, complete size reduction and meter material onto • Conveyor starts are available in push-
    conveyance systems at a steady rate. button pendant or photo cell

    • Emergency stops are included on


    McLanahan designs each Crawler-Mounted Feeder-Breaker to meet mine conditions and both sides of machine and via pull
    operator preference. They are available in two configurations: Low Vein (LV) for ceilings as cord across hopper
    low as 32” (812 mm) or High Vein (HV). They can accept large feed lumps of friable minerals
    • Heavy-duty fabricated steel side
    and produce a 6” to 8” (150 mm to 200 mm) one-dimensional product at rates up to 1200 frames are gusseted and connected
    tph (1080 mtph). A typical machine can hold up to two loads from a shuttle car and process by steel plate cross-members
    each load in 80-90 seconds.
    • All lubrication points are located at a
    How It Works common bank for easy access
    Crawler-Mounted Feeder-Breakers utilize engineering-class roller chain and solid steel • Decks are reinforced in the crushing
    flights between a sprocketed head and tail shaft to drag material along a steel deck. The zone and lined with replaceable AR
    head shaft is driven hydraulically or mechanically with a shaft-mounted hydraulic motor or steel plates
    shaft-mounted, right angle reducer with torque control coupling. The breaker roll is driven
    • Shaft-mounted, high torque breaker
    mechanically with a shaft-mounted, right angle reducer with torque control coupling. Heavy- and conveyor drives
    duty crawler tracks provide mobility over rough, uneven mine floors.
    • Large diameter drive sprockets and
    A Safe Design heavy-duty tracks
    Developed to meet safety requirements of underground mining, the Crawler-Mounted Feeder- • Engineering-class roller chain and
    Breaker is a Mine Safety and Health Administration (MSHA) approved design. Operation of solid alloy steel flight bars on the
    the drag conveyor and breaker roll interlock with the downstream belt conveyor. Through the conveyor
    programmable logic controller, these functions are timed to shut down at designated intervals
    • Under-speed control on the breaker
    when the belt conveyor stops or when material is not present. and conveyor

    Simple Operation and Maintenance • Touchscreen automation


    Touchscreen controls and diagnostics are included to enhance and simplify operation of • Water spray dust suppression
    McLanahan Crawler-Mounted Feeder-Breakers. These controls are easy to use and provide
    valuable feedback if a fault is encountered. Included is an electronic manual with drawings • Dry chemical fire suppression
    and schematics for easy viewing and reference. Maintenance is made simple with easy
    access to replaceable components and shaft assemblies that can be removed in one piece.
    CRAWLER-MOUNTED FEEDER-BREAKERS

    Frame
    McLanahan’s Crawler-Mounted Feeder-Breakers start with solid frame construction. Pieces
    and shapes are burned from full sheets of steel plate on our plasma tables. The pieces are
    then bent where appropriate and fully welded and joined by steel cross members to form
    the frame. Thick replaceable A.R. liners cover the top deck and A.R. sideliners are used
    along the chain runs to protect the base frame.

    Feed End & Hopper


    Feed end and hopper configurations on McLanahan Crawler-Mounted Feeder-Breakers Frame and Conveyor System
    are designed to accept mined material in accordance with the type of haulage equipment
    (scoop, shuttle car, ram car, etc.) and capacity requirements. Many designs are available
    to accommodate end, side or three-way dumping with variations of each, including swing
    gates and more.

    Conveyor System
    The conveyor system on McLanahan Crawler-Mounted Feeder-Breakers drags material to
    the breaker roll and meters the crushed product onto the conveyor belt. Heavy-duty, solid
    steel flight bars are pin-mounted to 3 ½” (88.9 mm) pitch engineering class roller chain.
    The positive drag power of this system allows drivers to dump without “jogging” their loads,
    reducing cycle time back to the miner. Chain tension is adjusted via a hydraulic cylinder
    Roller Chains
    and hand pump. Steel shims are used to hold the setting.

    Conveyor Drive Options


    McLanahan offers direct alignment-free conveyor drives via hydraulic or electro-mechanical
    systems. Compact hydraulic drives provide a natural cushioning effect to withstand shock-
    loading to the conveyor system. A two-speed drive is standard. Variable speed is available
    as an option. The electro-mechanical drive uses a magnetic, torque-limiting coupling to
    provide protection to the conveyor system. Both hydraulic and electro-mechanical drives
    provide an optional automatic reversing feature to clear blockages or remove tramp
    materials.

    Breaker Roll & Breaker Roll Drive Breaker Roll


    McLanahan breaker rolls are designed to fracture or break material, rather than crush or
    pulverize. Because the breaker roll rotates in the same direction as material flow, each
    piece is simultaneously subjected to the force of one or more pick points in order to break it
    along inherent fracture planes. The breaker roll is driven by an electro-mechanical method
    that includes a motor and shaft-mounted reducer. A torque-limiting magnetic coupling
    is used between the motor and reducer to eliminate damage to the breaker drive and
    assembly.

    Belt Tail Pulley


    The belt tail pulley simplifies underground operations by providing a seamless transition
    from Crawler-Mounted Feeder-Breakers to conveyor belts. The Crawler-Mounted Feeder- Belt Tail Pulley
    Breaker is able to pull the belt-line as the mine face advances, limiting downtime during
    belt moves. McLanahan is able to accommodate many different transition styles to suit the
    mine conditions, while pulling belt in excess of 15,000 feet (457 m).

    Crawlers
    The key to its ability to incorporate belt tail pulley assemblies is the powerful crawlers that
    provide over 75,000 lbs (34,019 kg) of pull force. Known for their superior ability to tram
    over rough terrain and steep slopes, McLanahan Crawler-Mounted Feeder-Breakers can go
    where no others have gone before. Crawler tracks are available in 15” or 18” (381 mm or
    457 mm) pad widths, and all crawler drives incorporate free-wheeling ability.
    Crawler Tracks

    CORPORATE HEADQUARTERS
    Pennsylvania, USA | +1 (814) 695 9807 | sales@mclanahan.com | mclanahan.com
    ASIA | AUSTRALIA & ASIA PACIFIC | EUROPE | LATIN AMERICA | NORTH AMERICA

    You might also like