74HC153; 74HCT153

Dual 4-input multiplexer

Rev. 10 — 13 August 2021 Product data sheet

1. General description
The 74HC153; 74HCT153 is a dual 4-input multiplexer. The device features independent enable
inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the select inputs
select one of the four binary inputs and routes it to the multiplexer output (nY). A HIGH on E forces
the corresponding multiplexer outputs LOW. Inputs include clamp diodes. This enables the use of
current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

• Wide supply voltage range from 2.0 to 6.0 V
• CMOS low power dissipation
• High noise immunity
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Input levels:
• For 74HC153: CMOS level
• For 74HCT153: TTL level
• Non-inverting outputs
• Separate enable input for each output
• Common select inputs
• Permits multiplexing from n lines to 1 line
• Enable line provided for cascading (n lines to 1 line)
• Complies with JEDEC standards:
• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• ESD protection:
• HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V
• Specified from -40 °C to +85 °C and -40 °C to +125 °C.

3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC153D -40 °C to +125 °C SO16 plastic small outline package; 16 leads; SOT109-1
74HCT153D body width 3.9 mm

74HC153PW -40 °C to +125 °C TSSOP16 plastic thin shrink small outline package; SOT403-1
74HCT153PW 16 leads; body width 4.4 mm
Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

4. Functional diagram
1

2E
1I0
6
1I1
5 1Y
1I2 MUX 7
4
1I3
3

S0
6 5 4 3 10 11 12 13 14
S1
2
1I0 1I1 1I2 1I3 2I0 2I1 2I2 2I3
2I0
14 S0 10
2I1
2 S1 11 2Y
2I2 MUX 9
1 1E 12
2I3
15 2E 13
1Y 2Y 2E

7 9 001aal843 15 001aal844

Fig. 1. Logic symbol Fig. 2. Functional diagram

1E 1I3 1I2 1I1 1I0 S0 S1 2I3 2I2 2I1 2I0 2E

1Y 2Y 001aal845

Fig. 3. Logic diagram

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 2 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

5. Pinning information

5.1. Pinning
74HC153
74HCT153

1E 1 16 VCC 74HC153
74HCT153
S1 2 15 2E

1I3 3 14 S0 1E 1 16 VCC
S1 2 15 2E
1I2 4 13 2I3
1l3 3 14 S0
1I1 5 12 2I2 1l2 4 13 2l3
1l1 5 12 2l2
1I0 6 11 2I1
1l0 6 11 2l1
1Y 7 10 2I0 1Y 7 10 2l0
GND 8 9 2Y
GND 8 9 2Y

aaa-008463 aaa-008464

Fig. 4. Pin configuration SOT109-1 (SO16) Fig. 5. Pin configuration SOT403-1 (TSSOP16)

5.2. Pin description

Table 2. Pin description
Symbol Pin Description
1E, 2E 1, 15 output enable inputs (active LOW)
S0, S1 14, 2 data select inputs
1I0, 1I1, 1I2, 1I3 6, 5, 4, 3 data inputs source 1
1Y 7 multiplexer output source 1
GND 8 ground (0 V)
2Y 9 multiplexer output source 2
2I0, 2I1, 2I2, 2I3 10, 11, 12, 13 data inputs source 2
VCC 16 supply voltage

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 3 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

6. Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care.
select Inputs data inputs output enable output
S0 S1 nI0 nI1 nI2 nI3 nE nY
X X X X X X H L
L L L X X X L L
L L H X X X L H
H L X L X X L L
H L X H X X L H
L H X X L X L L
L H X X H X L H
H H X X X L L L
H H X X X H L H

7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage -0.5 +7 V
IIK input clamping current VI < -0.5 V or VI > VCC + 0.5 V [1] - ±20 mA
IOK output clamping current VO < -0.5 V or VO > VCC + 0.5 V [1] - ±20 mA
IO output current -0.5 V < VO < VCC + 0.5 V - ±25 mA
ICC supply current - 50 mA
IGND ground current -50 - mA
Tstg storage temperature -65 +150 °C
Ptot total power dissipation [2] - 500 mW

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SOT109-1 (SO16) package: Ptot derates linearly with 12.4 mW/K above 110 °C.
For SOT403-1 (TSSOP16) package: Ptot derates linearly with 8.5 mW/K above 91 °C.

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 4 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

8. Recommended operating conditions

Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol Parameter Conditions 74HC153 74HCT153 Unit
Min Typ Max Min Typ Max
VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V
VI input voltage 0 - VCC 0 - VCC V
VO output voltage 0 - VCC 0 - VCC V
Tamb ambient temperature -40 +25 +125 -40 +25 +125 °C
Δt/ΔV input transition rise and fall rate VCC = 2.0 V - - 625 - - - ns/V
VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V
VCC = 6.0 V - - 83 - - - ns/V

9. Static characteristics
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit
Min Typ Max Min Max Min Max
74HC153
VIH HIGH-level VCC = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V
input voltage VCC = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V
VCC = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V
VIL LOW-level VCC = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V
input voltage VCC = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V
VCC = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V
VOH HIGH-level VI = VIH or VIL
output voltage IO = -20 μA; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V
IO = -20 μA; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V
IO = -20 μA; VCC = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V
IO = -4.0 mA; VCC = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V
IO = -5.2 mA; VCC = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V
VOL LOW-level VI = VIH or VIL
output voltage IO = 20 μA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V
IO = 20 μA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V
IO = 20 μA; VCC = 6.0 V - 0 0.1 - 0.1 - 0.1 V
IO = 4.0 mA; VCC = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V
IO = 5.2 mA; VCC = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V
II input leakage VI = VCC or GND; VCC = 6.0 V - - ±0.1 - ±1 - ±1 μA
current
ICC supply current VI = VCC or GND; IO = 0 A; - - 8.0 - 80 - 160 μA
VCC = 6.0 V
CI input - 3.5 - - - - - pF
capacitance

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 5 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit

Min Typ Max Min Max Min Max
74HCT153
VIH HIGH-level VCC = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V
input voltage
VIL LOW-level VCC = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V
input voltage
VOH HIGH-level VI = VIH or VIL; VCC = 4.5 V
output voltage IO = -20 μA 4.4 4.5 - 4.4 - 4.4 - V
IO = -4.0 mA 3.98 4.32 - 3.84 - 3.7 - V
VOL LOW-level VI = VIH or VIL; VCC = 4.5 V
output voltage IO = 20 μA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V
IO = 5.2 mA; VCC = 6.0 V - 0.15 0.26 - 0.33 - 0.4 V
II input leakage VI = VCC or GND; VCC = 5.5 V - - ±0.1 - ±1 - ±1 μA
current
ICC supply current VI = VCC or GND; IO = 0 A; - - 8 - 80 - 160 μA
VCC = 5.5 V
ΔICC additional per input pin;
supply current VI = VCC - 2.1 V; IO = 0 A;
other inputs at VCC or GND;
VCC = 4.5 V to 5.5 V
1In, 2In - 45 162 - 203 - 221 μA
nE - 60 216 - 270 - 294 μA
Sn - 135 486 - 608 - 662 μA
CI input - 3.5 - - - - - pF
capacitance

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 6 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

10. Dynamic characteristics

Table 7. Dynamic characteristics
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit, see Fig. 8; unless otherwise specified
Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit
Min Typ Max Min Max Min Max
74HC153
tpd propagation 1In to nY, 2In to nY; [1]
delay see Fig. 6
VCC = 2.0 V - 47 145 - 180 - 220 ns
VCC = 4.5 V - 17 29 - 36 - 44 ns
VCC = 5.0 V; CL = 15 pF - 14 - - - - - ns
VCC = 6.0 V - 14 25 - 31 - 38 ns
Sn to nY; see Fig. 7
VCC = 2.0 V - 50 150 - 190 - 225 ns
VCC = 4.5 V - 18 30 - 38 - 45 ns
VCC = 5.0 V; CL = 15 pF - 15 - - - - - ns
VCC = 6.0 V - 14 26 - 33 - 38 ns
nE to nY; see Fig. 7
VCC = 2.0 V - 33 100 - 125 - 150 ns
VCC = 4.5 V - 12 20 - 25 - 30 ns
VCC = 5.0 V; CL = 15 pF - 10 - - - - - ns
VCC = 6.0 V - 10 17 - 21 - 26 ns
tt transition time see Fig. 6 [2]
VCC = 2.0 V - 19 75 - 95 - 110 ns
VCC = 4.5 V - 7 15 - 19 - 22 ns
VCC = 6.0 V - 6 13 - 16 - 19 ns
CPD power per package; [3] - 30 - - - - - pF
dissipation VI = GND to VCC
capacitance

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 7 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit

Min Typ Max Min Max Min Max
74HCT153
tPHL HIGH to LOW 1In to nY, 2In to nY; [1]
propagation see Fig. 6
delay VCC = 4.5 V - 19 34 - 43 - 51 ns
VCC = 5.0 V; CL = 15 pF - 16 - - - - - ns
tPLH LOW to HIGH 1In to nY, 2In to nY; [1]
propagation see Fig. 6
delay VCC = 4.5 V - 13 24 - 30 - 36 ns
VCC = 5.0 V; CL = 15 pF - 16 - - - - - ns
tpd propagation Sn to nY; see Fig. 7 [1]
delay VCC = 4.5 V - 20 34 - 43 - 51 ns
VCC = 5.0 V; CL = 15 pF - 17 - - - - - ns
nE to nY; see Fig. 7 [1]
VCC = 4.5 V - 14 27 - 34 - 41 ns
VCC = 5.0 V; CL = 15 pF - 11 - - - - - ns
tt transition time see Fig. 6 [2]
VCC = 4.5 V - 7 15 - 19 - 22 ns
CPD power per package; [3] - 30 - - - - - pF
dissipation VI = GND to VCC - 1.5 V
capacitance

[1] tpd is the same as tPHL and tPLH.

[2] tt is the same as tTHL and tTLH.
[3] CPD is used to determine the dynamic power dissipation (PD in μW):
2 2
PD = CPD x VCC x fi x N + ∑(CL x VCC x fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
2
∑(CL x VCC x fo) = sum of outputs.

VI

1In, 2ln input VM VM

GND
tPHL tPLH
VOH
VY
nY output VM VM
VX
VOL
tTHL tTLH
aaa-008465

Measurement points are given in Table 8.

VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 6. Waveforms showing the input (1In, 2In) to output (1Y, 2Y) propagation delays and output transition times

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 8 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

VI

Sn, nE input VM VM

GND
tPHL tPLH
VOH
VY
nY output VM VM
VX
VOL
tTHL tTLH
aaa-008466

Measurement points are given in Table 8.

VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 7. Waveforms showing the input (Sn, nE) to output (nY) propagation delays

Table 8. Measurement points

Type Input Output
VM VM VX VY
74HC153 0.5VCC 0.5VCC 0.1VCC 0.9VCC
74HCT153 1.3 V 1.3 V 0.1VCC 0.9VCC

tW
VI
90 %
negative
VM VM
pulse
10 %
GND
tf tr
tr tf
VI
90 %
positive
VM VM
pulse
10 %
GND tW

VCC

VI VO
G DUT

RT CL

001aah768

Test data is given in Table 9.

Definitions test circuit:
RT = termination resistance should be equal to output impedance Zo of the pulse generator.
CL = load capacitance including jig and probe capacitance.
Fig. 8. Test circuit for measuring switching times

Table 9. Test data

Type Input Load Test
VI tr, tf CL
74HC153 VCC 6.0 ns 15 pF, 50 pF tPLH, tPHL
74HCT153 3.0 V 6.0 ns 15 pF, 50 pF tPLH, tPHL

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 9 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

11. Package outline

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

D E A
X

y HE v M A

16 9

Q
A2
(A 3) A
A1
pin 1 index
θ
Lp

1 8 L

e w M detail X
bp

0 2.5 5 mm
scale

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

A
UNIT A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) θ
max.
0.25 1.45 0.49 0.25 10.0 4.0 6.2 1.0 0.7 0.7
mm 1.75 0.25 1.27 1.05 0.25 0.25 0.1
0.10 1.25 0.36 0.19 9.8 3.8 5.8 0.4 0.6 0.3 8
o
o
0.010 0.057 0.019 0.0100 0.39 0.16 0.244 0.039 0.028 0.028 0
inches 0.069 0.01 0.05 0.041 0.01 0.01 0.004
0.004 0.049 0.014 0.0075 0.38 0.15 0.228 0.016 0.020 0.012

Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

OUTLINE REFERENCES EUROPEAN

ISSUE DATE
VERSION IEC JEDEC JEITA PROJECTION

99-12-27
SOT109-1 076E07 MS-012
03-02-19

Fig. 9. Package outline SOT109-1 (SO16)

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 10 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1

D E A
X

y HE v M A

16 9

Q
A2 (A 3 )
A
A1
pin 1 index

θ
Lp
L
1 8
detail X
w M
e bp

0 2.5 5 mm
scale

DIMENSIONS (mm are the original dimensions)

A
UNIT A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ
max.

mm
0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.40 8o
1.1 0.25 0.65 1 0.2 0.13 0.1
0.05 0.80 0.19 0.1 4.9 4.3 6.2 0.50 0.3 0.06 0o

Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

OUTLINE REFERENCES EUROPEAN

ISSUE DATE
VERSION IEC JEDEC JEITA PROJECTION

99-12-27
SOT403-1 MO-153
03-02-18

Fig. 10. Package outline SOT403-1 (TSSOP16)

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 11 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

12. Abbreviations
Table 10. Abbreviations
Acronym Description
CMOS Complementary Metal-Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
TTL Transistor-Transistor Logic

13. Revision history

Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74HC_HCT153 v.10 20210813 Product data sheet - 74HC_HCT153 v.9
Modifications: • Type number 74HC153DB (SOT338-1/SSOP16) removed.
• Section 2 updated.
74HC_HCT153 v.9 20210114 Product data sheet - 74HC_HCT153 v.8
Modifications: • Type number 74HCT153DB (SOT338-1/SSOP16) removed.
74HC_HCT153 v.8 20190813 Product data sheet - 74HC_HCT153 v.7
Modifications: • Type numbers 74HC153DB and 74HCT153DB (SOT338-1/SSOP16) added.
• Table 4: Derating values for Ptot total power dissipation updated.
74HC_HCT153 v.7 20181010 Product data sheet - 74HC_HCT153 v.6
Modifications: • The format of this data sheet has been redesigned to comply with the identity
guidelines of Nexperia.
• Legal texts have been adapted to the new company name where appropriate.
• Type numbers 74HC153DB and 74HCT153DB (SOT338-1/SSOP16) removed.
74HC_HCT153 v.6 20160511 Product data sheet - 74HC_HCT153 v.5
Modifications: • Type numbers 74HC153N and 74HCT153N (SOT38-4) removed.
74HC_HCT153 v.5 20140123 Product data sheet - 74HC_HCT153 v.4
Modifications: • Table 1 and Section 11: all references to 14 pin packages removed.
74HC_HCT153 v.4 20131128 Product data sheet - 74HC_HCT153 v.3
74HC_HCT153 v.3 20130722 Product data sheet - 74HC_HCT153_CNV v.2
74HC_HCT153_CNV v.2 19970827 Product specification - -

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 12 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer
injury, death or severe property or environmental damage. Nexperia and its

14. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Quick reference data — The Quick reference data is an extract of the
Data sheet status product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status Product Definition Applications — Applications that are described herein for any of these
[1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation
Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use
data sheet the objective specification for without further testing or modification.
product development. Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
Preliminary [short] Qualification This document contains data from
any assistance with applications or customer product design. It is customer’s
data sheet the preliminary specification.
sole responsibility to determine whether the Nexperia product is suitable
Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as
data sheet specification. for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
[1] Please consult the most recently issued document before initiating or
completing a design. Nexperia does not accept any liability related to any default, damage, costs
[2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s
[3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party
changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the
multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to
the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Definitions Limiting values — Stress above one or more limiting values (as defined in
Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent
internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper)
modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those
warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the
and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
Short data sheet — A short data sheet is an extract from a full data sheet
the quality and reliability of the device.
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are
detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as
full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed
office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is
full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
Product specification — The information and data provided in a Product
terms and conditions with regard to the purchase of Nexperia products by
data sheet shall define the specification of the product as agreed between
customer.
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted
valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the
beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
Disclaimers may be subject to export control regulations. Export might require a prior
Limited warranty and liability — Information in this document is believed authorization from competent authorities.
to be accurate and reliable. However, Nexperia does not give any
Non-automotive qualified products — Unless this data sheet expressly
representations or warranties, expressed or implied, as to the accuracy
states that this specific Nexperia product is automotive qualified, the
or completeness of such information and shall have no liability for the
product is not suitable for automotive use. It is neither qualified nor tested in
consequences of use of such information. Nexperia takes no responsibility
accordance with automotive testing or application requirements. Nexperia
for the content in this document if provided by an information source outside
accepts no liability for inclusion and/or use of non-automotive qualified
of Nexperia.
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
In the event that customer uses the product for design-in and use in
special or consequential damages (including - without limitation - lost
automotive applications to automotive specifications and standards,
profits, lost savings, business interruption, costs related to the removal
customer (a) shall use the product without Nexperia’s warranty of the
or replacement of any products or rework charges) whether or not such
product for such automotive applications, use and specifications, and (b)
damages are based on tort (including negligence), warranty, breach of
whenever customer uses the product for automotive applications beyond
contract or any other legal theory.
Nexperia’s specifications such use shall be solely at customer’s own risk,
Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed
whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for
for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s
Terms and conditions of commercial sale of Nexperia. product specifications.
Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for
to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy
specifications and product descriptions, at any time and without notice. This between the translated and English versions.
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and
systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners.
of an Nexperia product can reasonably be expected to result in personal

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 13 / 14

Nexperia 74HC153; 74HCT153
Dual 4-input multiplexer

Contents
1. General description...................................................... 1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Functional diagram.......................................................2
5. Pinning information......................................................3
5.1. Pinning.........................................................................3
5.2. Pin description............................................................. 3
6. Functional description................................................. 4
7. Limiting values............................................................. 4
8. Recommended operating conditions..........................5
9. Static characteristics....................................................5
10. Dynamic characteristics............................................ 7
11. Package outline........................................................ 10
12. Abbreviations............................................................ 12
13. Revision history........................................................12
14. Legal information......................................................13

© Nexperia B.V. 2021. All rights reserved

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 13 August 2021

74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2021. All rights reserved

Product data sheet Rev. 10 — 13 August 2021 14 / 14