1 Oop

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION
(Autonomous)
(ISO/IEC - 27001 - 2005 Certified)
WINTER – 2019 EXAMINATION

MODEL ANSWER
Subject: Object Oriented Programming Using C++ Subject Code: 22316
Important Instructions to examiners:

1) The answers should be examined by key words and not as word-to-word as given in the model
answer scheme.
2) The model answer and the answer written by candidate may vary but the examiner may try to
assess the understanding level of the candidate.
3) The language errors such as grammatical, spelling errors should not be given more Importance
(Not applicable for subject English and Communication Skills).
4) While assessing figures, examiner may give credit for principal components indicated in the
figure. The figures drawn by candidate and model answer may vary. The examiner may give
credit for any equivalent figure drawn.
5) Credits may be given step wise for numerical problems. In some cases, the assumed constant
values may vary and there may be some difference in the candidate‟s answers and model
answer.
6) In case of some questions credit may be given by judgement on part of examiner of relevant
answer based on candidate‟s understanding.
7) For programming language papers, credit may be given to any other program based on
equivalent concept.
Q. Sub Answer Marking

No Q.N. Scheme
.
1. Attempt any FIVE of the following: 10
a) State the difference between OOP and POP. 2M
Ans.
Sr. OBJECT ORIENTED PROCEDURE
No. PROGRAMMING ORIENTED
(OOP) PROGRAMMING (POP)
1 Focus is on data rather than Focus is on doing things
procedure. (procedure). Any two
2 Programs are divided into Large programs are divided differen
multiple objects. into multiple functions. ces 1M
3 Data is hidden and cannot Data move openly around each
be accessed by external the system from function to
functions. function.
4 Objects communicate with Functions transform data
each other through from one form to another
function. by calling each other.
5 Employs bottom-up Employs top-down
approach in program approach in program
design design.
Page 1 / 21
(Autonomous)

MODEL ANSWER
6 Object oriented approach is Procedure oriented

used in C++ language. approach is used in C
language.
b) What is a class? Give its example. 2M
Ans. Class is a user defined data type that combines data and functions Class
together. It is a collection of objects of similar type. definitio
n 1M
Example:
class Student
{ Correct
int rollno; example
char name[10]; 1M
public:
void getdata( );
void putdata( );
};
c) What is multilevel inheritance? Draw the diagram to show 2M

multilevel inheritance. using classes with data member and
member function.
Ans. When a class is derived from another derived class then it is called as Define
multilevel inheritance. multilev
el
inherita
nce 1M
Diagram
1M
d) Explain use of scope resolution operator. 2M

Ans. It is used to uncover a hidden variable. Scope resolution operator
allows access to the global version of a variable. The scope resolution Correct
operator is used to refer variable of class anywhere in program. use 2M
:: Variable_name
OR
Scope resolution operator is also used in classes to identify the class
Page 2 / 21
(Autonomous)

MODEL ANSWER
to which a member function belongs. Scope resolution operator is

used to define function outside of class.
Return_type class_name:: function_name( )
{
Function body
}
e) Write two properties of static member function. 2M
Ans. i) A static member function can have access to only other static data Two
members and functions declared in the same class. properti
ii) A static member function can be called using the class name with a es 1M
scope resolution operator instead of object name as follows: each
class_name::function_name;
f) Explain virtual base class with suitable example. 2M
Ans. A virtual base class (Grandparent class) is a class that avoids duplication of Explana
inherited data in derived class (child class) derived from parent classes tion of
(parent1 and parent2) which in turn derived from base class. Virtual
base
Example:
class 1M
Example
1M
g) Give syntax and use of fclose ( ) function. 2M

Ans.
Syntax: Syntax
int fclose(FILE* stream); 1M
Use: This function is used to close a file stream. The data that is Correct
buffered but not written is flushed to the OS and all unread buffered use 1M
data is discarded.
2. Attempt any THREE of the following: 12
a) Describe memory allocation for objects. 4M
Ans. The memory space for object is allocated when they are declared and
not when the class is specified. The member functions are created and
placed in memory space only once when they are defined as a part of
Page 3 / 21
(Autonomous)

MODEL ANSWER
a class definition. Since all the objects belonging to that class use the
same member functions, no separate space is allocated for member Descript
functions. When the objects are created only space for member ion 2M
variable is allocated separately for each object. Separate memory
locations for the objects are essential because the member variables
will hold different data values for different objects.
Diagram
2M
Fig: Memory allocation for objects

b) Write a program to implement single inheritance from the 4M
following Refer Figure No.1
(Note: Any other correct logic shall be considered)

Ans. #include<iostream.h>
#include<conio.h>
class employee
{ Class
protected:
declarati
int emp_id;
char name[10];
on 1M
}; each
Page 4 / 21
(Autonomous)

MODEL ANSWER
class emp_info:public employee

{
int basic_salary;
public:
void getdata()
{
cout<<"Enter emp id";
Functio
cin>>emp_id; n
cout<<"Enter name"; declarati
cin>>name; on 1M
cout<<"Enter basic salary";
cin>>basic_salary;
}
void putdata()
{
cout<<"\nEmp_id="<<emp_id;
cout<<"\nName="<<name;
cout<<"\nBasic Salary="<<basic_salary;
}
};
void main()
{
emp_info e;
clrscr(); Main
e.getdata(); function
e.putdata(); 1M
getch();
}
c) Write any four benefits of OOP. 4M
Ans. Benefits of OOP:
1. We can eliminate redundant code and extend the use of existing
classes.
2. We can build programs from the standard working modules that
communicate with one another, rather than having to start writing Any
the code from scratch. This leads to saving of development time four
and higher productivity. benefits
3. The principle of data hiding helps the programmer to build secure 1M each
programs that cannot be invaded by code in other parts of the
program.
4. It is possible to have multiple instances of an object to co-exist
without any interference.
5. It is possible to map objects in the problem domain to those in the
Page 5 / 21
(Autonomous)

MODEL ANSWER
program.
6. It is easy to partition the work in a project based on objects.
7. The data-centered design approach enables us to capture more
details of a model in implementable form.
8. Object-oriented systems can be easily upgraded from small to
large systems.
9. Message passing techniques for communication between objects
makes the interface descriptions with external systems much
simpler.
10. Software complexity can be easily managed.
d) Describe ‘this’ pointer with an example. 4M
Ans. ‘this’ pointer:
C++ uses a unique keyword called „this‟ to represent an object that
invokes a member function. This unique pointer is automatically
passed to a member function when it is invoked. „this‟ is a pointer
that always point to the object for which the member function was Descript
called. ion 2M
For example, the function call A.max ( ) will set the pointer „this‟ to
the address of the object A. Then suppose we call B.max ( ), the
pointer „this‟ will store address of object B.
Example:
#include<iostream.h>
class sample
{
int a; Correct
public: example
void setdata(int x) 2M
{
this ->a=x;
}
void putdata()
{
cout<<this ->a;
}
};
void main()
{
sample s;
Page 6 / 21
(Autonomous)

MODEL ANSWER
s.setdata(100);
s.putdata( );
}
In the above example, this pointer is used to represent object s when
setdata ( ) and putdata ( ) functions are called.
a) Write the applications of object oriented programming. 4M
Ans. Applications of object oriented programming are:
1) Real time systems
2) Simulation and modeling Any
3) Object-oriented databases four
4) Hypertext, hypermedia and expertext correct
5) AI and expert systems applicati
6) Neural networks and parallel programming ons 1M
7) Decision support and office automation systems each
8) CIM/CAM/CAD systems
b) State the rules for writing destructor function. 4M
Ans. Rules for writing destructor function are:
1) A destructor is a special member function which should destroy
the objects that have been created by constructor. Any
2) Name of destructor and name of the class should be same. four
3) Destructor name should be preceded with tilde (~) symbol. correct
4) Destructor should not accept any parameters. rules
5) Destructor should not return any value. 1M each
6) Destructor should not be classified in any types.
7) A class can have at most one destructor.
c) What is inheritance? Give different types of inheritance. 4M
Ans. Inheritance:
The mechanism of deriving new class from an old/existing class is
called inheritance. Correct
OR explanat
Inheritance is the process by which objects of one class acquired the ion of
properties of objects of another classes. inherita
nce 2M
Syntax:
class derived-class-name: visibility-mode base-class-name

{
------//
Page 7 / 21
(Autonomous)

MODEL ANSWER
-----// members of derived class

-----//
};
Types of inheritance:
1) Single inheritance: In single inheritance, a derived class is
derived from only one base class.
Diagram:
Correct
types of
inherita
nce
2) Multiple inheritance: In multiple inheritance, derived class is (any 4)
derived from more than one base classes. 2M
Diagram:
3) Hierarchical inheritance: In hierarchical inheritance, more than

one derived classes are derived from single class.
Diagram:
4) Multilevel inheritance: In multilevel inheritance, a derived class

is derived from a derived class (intermediate base class) which in turn
Page 8 / 21
(Autonomous)

MODEL ANSWER
derived from a single base class.

Diagram:
5) Hybrid inheritance: Hybrid inheritance is a combination of

single, multiple, multilevel and hierarchical inheritance.
Diagram:
d) What are the rules for virtual function? 4M

Ans. Rules for virtual function:
1. The virtual functions must be members of some class.
2. They cannot be static members.
3. They are accessed by using object pointers.
4. A virtual function can be a friend of another class.
5. A virtual function in a base class must be defined, even though it Any
may not be used. four
6. The prototypes of the base class version of a virtual function and rules
all the derived class versions must be identical. 1M each
7. We cannot have virtual constructors, but we can have virtual
destructors.
8. While a base pointer can point to any type of the derived object,
the reverse is not true.
9. When a base pointer points to a derived class, incrementing or
Page 9 / 21
(Autonomous)

MODEL ANSWER
decrementing it will not make it to point to the next object of the

derived class.
10. If a virtual function is defined in the base class, it need not be
necessarily redefined in the derived class.
a) What is parameterized constructor? 4M
Ans. A constructor that accepts parameters is called as parameterized
constructor.
In some applications, it may be necessary to initialize the various data
members of different objects with different values when they are
created. Parameterized constructor is used to achieve this by passing
arguments to the constructor function when the objects are created. Correct
descripti
Example: on 4M
class ABC
{
int m;
public:
ABC(int x)
{
m=x;
}
void put()
{
cout<<m;
}
};
void main()
{
ABC obj(10);
obj.put();
}
In the above example, constructor ABC (int x) is a parameterized
constructor function that accepts one parameter. When „obj‟ object is
created for class ABC, parameterized constructor will invoke and
data member m will be initialized with the value 10 which is passed
as an argument. Member function put ( ) displays the value of data
member „m‟.
Page 10 / 21
(Autonomous)

MODEL ANSWER
b) Write a program to sort an 1-d array in ascending order. 4M

#include<conio.h>
void main()
{
int arr[20];
int i, j, temp,n;
clrscr(); Correct
cout<<"\n Enter the array size:"; array
cin>>n; input
cout<<"\n Enter array elements:"; 1M
for(i=0;i<n;i++)
{
cin>>arr[i]; Sorting
} of 1D
for(i=0;i<n;i++) array in
{ ascendin
for(j=i+1;j<n;j++) g order
{ 2M
if(arr[i]>arr[j])
{
temp=arr[i];
arr[i]=arr[j];
arr[j]=temp;
}
}
}
cout<<”Sorted Array:”; Display
for(i=0;i<n;i++) of sorted
{ array
cout<<”\n”<<arr[i]; 1M
}
getch();
}
c) Explain the friend function with proper example. 4M
Ans. Friend function:
The private members of a class cannot be accessed from outside the
class but in some situations two classes may need access of each
Page 11 / 21
(Autonomous)

MODEL ANSWER
other‟s private data. So a common function can be declared which

can be made friend of more than one class to access the private data Correct
of more than one class. The common function is made friendly with explanat
all those classes whose private data need to be shared in that function. ion of
This common function is called as friend function. Friend function is friend
not in the scope of the class in which it is declared. It is called function
without any object. The class members are accessed with the object 2M
name and dot membership operator inside the friend function. It
accepts objects as arguments.
Example:
Program to interchange values of two integer numbers using
friend function.
#include<conio.h>
class B; Correct
class A example
{ 2M
int x;
public:
void accept()
{
cout<<"\n Enter the value for x:";
cin>>x;
}
friend void swap(A,B);
};
class B
{
int y;
public:
void accept()
{
cout<<"\n Enter the value for y:";
cin>>y;
}
friend void swap(A,B);
};
void swap(A a,B b)
Page 12 / 21
(Autonomous)

MODEL ANSWER
{
cout<<"\n Before swapping:";
cout<<"\n Value for x="<<a.x;
cout<<"\n Value for y="<<b.y;
int temp;
temp=a.x;
a.x=b.y;
b.y=temp;
cout<<"\n After swapping:";
cout<<"\n Value for x="<<a.x;
cout<<"\n Value for y="<<b.y;
}
void main()
{
A a;
B b;
clrscr();
a.accept();
b.accept();
swap(a,b);
getch();
}
d) Write a program to count the number of lines in file. 4M
#include<fstream.h> Opening
#include<conio.h> of file
void main() 1M
{
ifstream file; Countin
char ch; g
int n=0; number
clrscr(); of lines
file.open("abc.txt"); 2M
while(file) Printing
{ number
file.get(ch); of lines
if(ch=='\n') in a file
n++; 1M
Page 13 / 21
(Autonomous)

MODEL ANSWER
}
cout<<"\n Number of lines in a file are:"<<n;
file.close();
getch();
}
5. Attempt any TWO of the following: 12
a) Write a program to declare a class ‘student’ having data 6M
members as ‘stud_name’ and ‘roll_no’. Accept and display this
data for 5 students.
#include<conio.h>
class student
{
int roll_no;
char stud_name[20]; Class
public: declarati
void Accept(); on 2M
void Display();
};
void student::Accept() Accept
{ ( )1M
cout<<"\n Enter student‟s name and roll no\n";
cin>>stud_name>>roll_no;
}
void student::Display()
{ Display
cout<<stud_name<<”\t”<<roll_no<<”\n”; ( ) 1M
}
void main()
{
student S[5];
inti;
clrscr();
for(i=0;i<5;i++)
{ Main ( )
S[i].Accept(); with
} array
cout<<”Student details \n Student‟s Name \t Roll No\n”; 2M
Page 14 / 21
(Autonomous)

MODEL ANSWER
for(i=0;i<5;i++)
{
S[i].Display();
}
getch();
}
b) State and explain the visibility modes used in inheritance. 6M
Ans. Visibility modes:
 private
 protected
 public
Base class Derived class visibility
visibility Private Protected Public
Private Not Not Not
Inherited Inherited Inherited
Protected Private Protected Protected
Public Private Protected Public
 Private:
o When a base class is privately inherited by a derived class,
„public members‟ and „protected members‟ of the base class
become „private members‟ of the derived class.
o Therefore, the public and protected members of the base class
can only be accessed by the member functions of derived class
but, cannot be accessed by the objects of the derived class.
Syntax: Explana
class derived: private base tion 2M
{ for each
//Members of derived class; visibility
}; mode
 Public:
o When a base class is publicly inherited by a derived class then
„protected members‟ of base class becomes „protected
members‟ and ‟public members‟ of the base class become
„public members‟ of the derived class.
o Therefore the public members of the base class can be
accessed by both the member functions of derived class as well
Page 15 / 21
(Autonomous)

MODEL ANSWER
as the objects of the derived class.

Syntax:
class derived: public base
{
//Members of derived class;
};
 Protected:
o When a base class is protectedly inherited by a derived class,
„public and protected members‟ of the base class become
„protected members‟ of the derived class.
o Therefore the public and protected members of the base class
can be accessed by the member functions of derived class as
well as the member functions of immediate derived class of it
but they cannot be accessed by the objects of derived class
Syntax:
class derived: protected base
{
//Members of derived class;
};
c) Write a program to declare a class ‘book’ containing data 6M
members as ‘title’, ‘author-name’, ‘publication’, ‘price’. Accept
and display the information for one object using pointer to that
object.
#include<conio.h>
class book
{ Class
char author_name[20]; declarati
char title[20]; on 2M
char publication[20];
float price;
public:
void Accept();
void Display();
};
void book::Accept() Accept
{ ( ) 1M
Page 16 / 21
(Autonomous)

MODEL ANSWER
cout<<"\n Enter book‟s title, author_name, publication and price \n:";

cin>> title >>author_name>> publication >> price;
}
void student::Display() Display
{ ( ) 1M
cout<<title <<”\t”<<author_name<<”\t”<<publication <<”\t”<<
price<<”\n”<<;
}
void main()
{
book b, *p; Main( )
clrscr(); with
p=&b; pointer
p->Accept(); 2M
cout<<”title \t author_name \t publication \t price\n”;
p-> Display();
getch();
}
a) Write a program that copies contents of one file into another file. 6M
Ans. Assuming input file to be copied file1.txt contents are “Hello
Friends…” and file where the contents need to copy is file2.txt
already created
#include<conio.h>
#include<fstream.h>
#include<stdio.h>
#include<stdlib.h>
void main()
{
clrscr();
ifstream fs; File
ofstream ft; open
char ch, fname1[20], fname2[20]; and
cout<<"Enter source file name with extension (like files.txt) : "; close
gets(fname1); 2M
fs.open(fname1);
Page 17 / 21
(Autonomous)

MODEL ANSWER
if(!fs)
{
cout<<"Error in opening source file..!!";
getch();
exit(1); Logic
} for copy
cout<<"Enter target file name with extension (like filet.txt) : "; contents
gets(fname2); 4M
ft.open(fname2);
if(!ft)
{
cout<<"Error in opening target file..!!";
fs.close();
getch();
exit(2);
}
while(fs.eof()==0)
{
fs>>ch;
ft<<ch;
}
cout<<"File copied successfully..!!";
fs.close();
ft.close();
getch();
}
b) Write a program to implement the following hierarchy using 6M
suitable member functions. Refer Figure No.2.
Page 18 / 21
(Autonomous)

MODEL ANSWER

Ans. # include <iostream.h>
#include<conio.h>
class Student
{
int roll_no;
char name[10];
public: Class
void read_studentData() student
{ declarati
cout<<”Enter student‟s roll no and name \n”; on 1M
cin>>roll_no>> name;
}
void display_studentData ()
{
cout<<”\n roll_no\t name\n”;
cout<<roll_no<<”\t”<<name<<”\n”;
}
};
class test: public Student
{
protected:
int marks1,marks2;
public: Class
void read_test() test
{ declarati
cout<<”\n Enter test marks\n”; on 1M
cin>>marks1>>marks2;
}
void display_test()
{
cout<<”\n test Marks \n Marks1 \t Marks2 \n”;
cout<<marks1<<”\t”<<marks2;
}
};
class sports
{
int score;
Page 19 / 21
(Autonomous)

MODEL ANSWER
public:
void read_sportsData()
{
cout<<”\n Enter sport score\n”; Class
cin>> score; sports
} declarati
void display_sportsData() on 1M
{
cout<<”\n sport score:”<<score;
}
};
class result: public test, public sports
{
int total;
public:
void read_result()
{
read_ studentData () ;
read_test(); Class
read_sportsData(); result
total=marks1+marks2; declarati
} on 2M
void display_result()
{
display_ studentData () ;
display_test();
display_sportsData();
cout<<”\n Total=”<<total;
}
};
void main()
{
result r;
clrscr();
r.read_result(); Main ()
r.display_result(); 1M
getch();
}
Page 20 / 21
(Autonomous)

MODEL ANSWER
c) Write a program to overload the ‘—’ unary operator to negate 6M

the values.
#include<conio.h>
#include<string.h>
class Number
{
int x,y;
public:
Number (int a, int b)
{ Correct
a =x; Program
b =y; with
} output
void display() 6M
{
cout<<"value of x=”<<x<<”\n Value of y= ”<<y;
}
void operator - ( )
{
x = - x;
y = - y;
}
};
void main ()
{
Number N1(5,6);
clrscr ();
N1. display ();
-N1;
cout<<"\n After negation:";
N1. display ();
getch ();
}
Page 21 / 21
(Autonomous)
SUMMER – 2019 EXAMINATION

MODEL ANSWER

answer scheme.
values may vary and there may be some difference in the candidate’s answers and model
answer.
answer based on candidate’s understanding.
equivalent concept.

No Q.N. Scheme
.
1. Attempt any FIVEof the following: 10
a) State the use of cin and cout. 2M
Ans. cin: cin is used to accept input data from user (Keyboard). Use -
cout:cout is used to display output data on screen. 1M each
b) Describe derived class with example. 2M
Ans. Derived class: In inheritance a new class is derived from an old class.
The new class is referred as derived class. The derived class can Descript
inherit all or some properties of its base class. ion 1M
Example:
class base
{
}; Example
class derived: public base 1M
{
};
c) State use of scope resolution operator. 2M
Ans. It is used to uncover a hidden variable. Scope resolution operator
allows access to the global version of a variable. The scope resolution Use 2M
Page 1 / 23
(Autonomous)

MODEL ANSWER
operator is used to refer variable of class anywhere in program.

:: Variable_name
OR
Scope resolution operator is also used in classes to identify the class
to which a member function belongs. Scope resolution variable is
used to define function outside of class.
Return_typeclass_name:: function_name( )
{
}
d) Define class and object. 2M
Ans. Class:
Class is a user defined data type that combines data and functions
together. It is a collection of objects of similar type. Definitio
n 1M
Object: each
It is a basic run time entity that represents a person, place or any item
that the program has to handle.
e) Write the use of ios : : in and ios : : out. 2M
Ans. ios::in - It is used as file opening mode to specify open file reading
only. Each
ios::out- It is used as file opening mode to specify open file writing use 1M
only.
f) Describe use of static data member. 2M
Ans. Use of static data member:
Static data member (variable) is used to maintain values common to Use 2M
the entire class. Only one copy of static member is created for the
entire class and is shared by all the objects of that class. Its lifetime is
the entire program.
g) Give meaning of following statements: 2M
int *ptr, a = 5;
ptr = & a;
cout<< * ptr;
cout<< (* ptr) + 1;
Ans. int *ptr, a = 5;
Declare pointer variable ptr and variable a with initial value 5. Meanin
ptr = & a; g of
initialize pointer variable with address of variable a (store address of each
variable a in ptr) Stateme
cout<< * ptr; nt 1/2M
Page 2 / 23
(Autonomous)

MODEL ANSWER
Displays value of a i.e. value at address stored inside ptr. It displays

value 5.
cout<< (* ptr) + 1;
Displays value by adding 1 to the value at address stored inside ptr. It
displays value 6
a) Write a ‘C++’ program to find factorial of given number using 4M
loop.
#include<conio.h>
void main() Correct
{ logic 2M
int no,fact=1,i;
clrscr();
cout<<"Enter number:";
cin>>no;
for(i=1;i<=no;i++) Correct
{ syntax
fact=fact*i; 2M
}
cout<<"Factorial ="<<fact;
getch();
}
b) Write a C++ program to declare a class COLLEGE with 4M
members as college code. Derive a new class as STUDENT with
members as studid. Accept and display details of student along
with college for one object of student.
Ans.
#include<conio.h>
class COLLEGE Definitio
{ n of
protected: class
int collegecode; COLLE
}; GE: 1M
Page 3 / 23
(Autonomous)

MODEL ANSWER
class STUDENT:public COLLEGE Definitio

{ n of
int studid; class
public: STUDE
void accept() NT 1M
{
cout<<"Enter college code:";
cin>>collegecode;
cout<<"Enter student id"; Accept
cin>>studid; and
} display
void display() function
{ 1M
cout<<"College code:"<<collegecode;
cout<<"Student id:"<<studid;
}
};
void main()
{ Main
STUDENT s; function
clrscr(); 1M
s.accept();
s.display();
getch();
}
c) Write a C++ program to find smallest number from two numbers 4M
using friend function. (Hint: use two classes).
#include<conio.h>
class class2;
class class1 Definitio
{ n of
int no1; class1
public: 1M
void get1()
{
cout<<"Enter number 1:";
cin>>no1;
Page 4 / 23
(Autonomous)

MODEL ANSWER
}
friend void smallest(class1 no1,class2 no2);
};
class class2
{ Definitio
int no2; n of
public: class2
void get2() 1M
{
cout<<"Enter number 2:";
cin>>no2;
}
friend void smallest(class1 no1,class2 no2);
};
void smallest(class1 c1,class2 c2)
{ Friend
if(c1.no1<c2.no2) function
cout<<"no1 is smallest"; 1M
else
cout<<"no2 is smallest";
}
void main()
{ Main()
class1 c1; function
class2 c2; 1M
clrscr();
c1.get1();
c2.get2();
smallest(c1,c2);
getch();
}
d) Differentiate between run time and compile time polymorphism. 4M

Ans. Sr. Compile time Runtime polymorphism
No. polymorphism Any
1 In this polymorphism, an In this polymorphism, four
object is bound to its selection of appropriate differen
function call at compile time. function is done at run time. ces 1M
each
Page 5 / 23
(Autonomous)

MODEL ANSWER
2 Functions to be called are Function to be called is

known well before. unknown until appropriate
selection is made.
3 This does not require use of This requires use of pointers
pointers to objects to object
4 Function calls execution are Function calls execution are
faster slower
5 It is implemented with It is implemented with
operator overloading or virtual function.
function overloading
a) Write a C++ program to create a class STUDENT 4M
The data members of STUDENT class.
Roll_No
Name
Marks
(Note: Accepting and displaying data functions is optional).
Ans. #include<iostream.h> Correct
#include<conio.h> Class
class STUDENT definitio
{ n with
int Roll_No; data
char Name[20]; member
float Marks; declarati
}; on: 4M
OR
#include<conio.h>
class STUDENT
{
int Roll_No;
char Name[20];
float Marks;
public:
void Accept();
void Display();
};
void STUDENT::Accept()
Page 6 / 23
(Autonomous)

MODEL ANSWER
{
cout<<"\nEnter data of student:";
cout<<"\nRoll number:";
cin>>Roll_No;
cout<<"\nName:";
cin>>Name;
cout<<"\nMarks:";
cin>>Marks;
}
void STUDENT::Display()
{
cout<<"\nStudents data is:";
cout<<"\nRoll number:"<<Roll_No;
cout<<"\nName:"<<Name;
cout<<"\nMarks:"<<Marks;
}
void main()
{
STUDENT S[5];
int i;
clrscr();
for(i=0;i<5;i++)
{
S[i].Accept();
}
for(i=0;i<5;i++)
{
S[i].Display();
}
getch();
}
b) Accept data for five students and display it. Write a C++ 4M
program to displya sum of array elements of array size n.
#include<conio.h>
void main()
{
int arr[20],i,n,sum=0;
Page 7 / 23
(Autonomous)

MODEL ANSWER
clrscr();
cout<<"\nEnter size of an array:"; Initializ
cin>>n; ation of
cout<<"\nEnter the elements of an array:"; array
for(i=0;i<n;i++) 2M
{
cin>>arr[i];
} Calculat
for(i=0;i<n;i++) ion and
{ display
sum=sum+arr[i]; of sum
} of array
cout<<"\nArray elements are:"; elements
for(i=0;i<n;i++) 2M
{
cout<<arr[i]<<" ";
}
cout<<"\nSum of array elements is:"<<sum;
getch();
}
c) Describe with examples, passing parameters to base class 4M
constructor and derived class constructor by creating object of
derived class.
Ans. When a class is declared, a constructor can be declared inside the
class to initialize data members. When a base class contains a
constructor with one or more arguments then it is mandatory for the
derived class to have a constructor and pass arguments to the base
class constructor. When both the derived and base classes contain Correct
constructors, the base constructor is executed first and then the Descript
constructor in the derived class is executed. The constructor of ion 2M
derived class receives the entire list of values as its arguments and
passes them on to the base constructors in the order in which they are
declared in the derived class.
General form to declare derived class constructor:

Derived-constructor (arglist1, arglist (D)):Base1(arglist1)
{
Body of derived class constructor
}
Page 8 / 23
(Autonomous)

MODEL ANSWER
Derived constructor declaration contains two parts separated with

colon (:). First part provides declaration of arguments that are passed
to the derived constructor and second part lists the function calls to
the base constructors.
Example:
#include<conio.h>
class base
{
int x; Correct
public: example
base(int a) 2M
{
x=a;
cout<<"Constructor in base x="<<x;
}
};
class derived: public base
{
int y;
public:
derived(int a,int b):base(a)
{
y=b;
cout<<"Constructor in derived.y="<<y;
}
};
void main()
{
clrscr();
derived ob(2,3);
getch();
}
In the above example, base class constructor requires one argument
and derived class constructor requires one argument. Derived class
constructor accepts two values and passes one value to base class
constructor.
Page 9 / 23
(Autonomous)

MODEL ANSWER
d) Describe how memory is allocated to objects of class with suitable 4M

diagram.
Ans. Description:
The memory space for object is allocated when they are declared and Correct
not when the class is specified. Actually, the member functions are descripti
created and placed in memory space only once when they are defined on 2M
as a part of a class definition. Since all the objects belonging to that
class use the same member functions, no separate space is allocated
for member functions. When the objects are created only space for
member variable is allocated separately for each object. Separate
memory locations for the objects are essential because the member
variables will hold different data values for different objects this is
shown in fig:
Correct
diagram
for
memory
allocatio
n of
objects
2M
Fig: Memory allocation for objects

a) Write a program to implement multiple inheritance as shown in 4M
following Figure No.1:
Page 10 / 23
(Autonomous)

MODEL ANSWER
Accept and display data for one object of class result.

(Note: Any other relevant logic should be considered).
Ans. Program:
#include<conio.h> Definitio
class Subject1 n of
{ Class
protected: Subject1
float m1; 1M
};
class Subject2 Definitio
{ n of
protected: Class
float m2; Subjec2
}; 1M
class Result:public Subject1,public Subject2
{ Definitio
float Total; n of
public: Class
void accept() Result
{ 1M
cout<<"Enter marks of subject1:";
cin>>m1;
cout<<"\nEnter marks of subject2:";
cin>>m2;
}
void calculate()
{
Total=(m1+m2);
}
void display()
{
Page 11 / 23
(Autonomous)

MODEL ANSWER
cout<<"\nSubject 1 marks:"<<m1;
cout<<"\nSubject 2 marks:"<<m2;
cout<<"\nTotal is:"<<Total;
}
};
void main()
{
Result r; main
clrscr(); function
r.accept(); 1M
r.calculate();
r.display();
getch();
}
b) Describe following terms: Inheritance, data abstraction, data 4M
encapsulation, dynamic binding.
Ans. Inheritance:
1. Inheritance is the process by which objects of one class acquire
the properties of objects of another class.
2. It supports the concept of hierarchical classification. It also
provides the idea of reusability. Correct
Data abstraction: descripti
1. Data abstraction refers to the act of representing essential features on 1M
without including the background details or explanations. each
2. Classes use the concept of abstraction and are defined as a list of
abstract attributes such as size, weight and cost and functions to
operate on these attributes.
Data encapsulation:
1. The wrapping up of data and functions together into a single unit
(called class) is known as encapsulation.
2. By this attribute the data is not accessible to the outside world,
and only those functions which are wrapped in the class can
access it.
Dynamic Binding:
1. Dynamic binding refers to the linking of a procedure call to be
executed in response to the call.
2. It is also known as late binding. It means that the code associated
with a given procedure call is not known until the time of the call
at run-time.
Page 12 / 23
(Autonomous)

MODEL ANSWER
c) State and describe visibility modes and its effects used in 4M

inheritance.
(Note: Diagram is optional)
Ans. Different visibility modes are: State
1. Private visibility
2. Protected modes
3. Public 1M
Effects of visibility modes in inheritance:
Private members of base class are not inherited directly in any

visibility mode. Descript
1. Private visibility mode ion of
In this mode, protected and public members of base class become effect of
private members of derived class. visibility
2. Protected visibility mode mode in
In this mode, protected and public members of base class become inherita
protected members of derived class. nce 1M
3. Public visibility mode each
In this mode, protected members of base class become protected
members of derived class and public members of base class
become public members of derived class.
d) Write a C++ program to count number of spaces in text file. 4M
Ans. Program:
#include<conio.h>
#include<fstream.h>
void main()
{
Page 13 / 23
(Autonomous)

MODEL ANSWER
ifstream file;
int s=0; Correct
char ch; logic 2M
clrscr();
file.open("abc.txt");
while(file) Correct
{ syntax
file.get(ch); 2M
if(ch==' ')
{
s++;
}
}
cout<<"\nNumber of spaces in text file are:"<<s;
getch();
}
e) Differentiate between contractor and destructor. 4M
(Note: Contractor shall be considered as Constructor.)
Ans. Constructor Destructor
A constructor is a special A destructor is a special
member function whose task is member function whose task is
to initialize the objects of its to destroy the objects that have
class. been created by constructor. Any
It constructs the values of data It does not construct the values four
members of the class. for the data members of the correct
class. differen
It is invoked automatically It is invoked implicitly by the ces 1M
when the objects are created. compiler upon exit of a each
program/block/function.
Constructors are classified in Destructors are not classified in
various types such as : any types.
Default constructor
Parameterized constructor
Copy constructor
Overloaded constructor
A class can have more than one A class can have at the most one
constructor. constructor.
Constructor accepts Destructor never accepts any
Page 14 / 23
(Autonomous)

MODEL ANSWER
parameters. Also it can have parameter.

default value for its parameter.
Syntax: Syntax:
classname() destructor name is preceded
{… with tilde.
… ~classname()
} {….
….
}
Example: Example:
ABC() ~ABC()
{ {
… ….
} }
a) (i) Write any three rules of operator overloading. 6M
(ii) Write a program in C++ to overload unary ‘_’ operator to
negate values of data members of class.
Ans. (i) Write any three rules of operator overloading.

Rules for overloading operators:
1. Only existing operators can be overloaded. New operators cannot
be created. Any
2. The overloaded operator must have at least one operand that is of three
user defined data type. rules of
3. We can’t change the basic meaning of an operator. That is to say, operator
we can’t redefine the plus(+) operator to subtract one value from overload
other. ing 1M
4. Overloaded operators follow the syntax rules of the original each
operators. They can’t be overridden.
5. There are some operators that can’t be overloaded.
6. We can’t use friend functions to overload certain operators.
However, member function scan be used to overload them.
7. Unary operators overloaded by means of member function take no
explicit arguments and return no explicit values, but, those
overloaded by means of the friend function, take one reference
argument (the object of the relevant class).
8. Binary operators overloaded through a member function, take one
Page 15 / 23
(Autonomous)

MODEL ANSWER
explicit argument and those which are overloaded through a friend

function take two explicit arguments.
9. When using binary operators overloaded through a member
function, the left hand operand must be an object of the relevant
class.
10. Binary arithmetic operators such as +,-,* and / must explicitly
returna value. They must not attempt to change their own
arguments.
(ii) Write a program in C++ to overload unary ‘_’ operator to

negate values of data members of class.
#include<conio.h>
#include<string.h>
class Number
{ Class
int x, y; declarati
public: on with
Number (int a,int b) member
{ 1M
a =x;
b =y;
}
void display()
{
cout<<"value of x=”<<x<<”\nValue of y= ”<<y;
}
void operator - ( ) Operato
{ r
x = - x; function
y = - y; definitio
} n 1M
};
void main()
{ Main()
Number N1(5,6); function
clrscr(); definitio
N1.display(); n 1M
Page 16 / 23
(Autonomous)

MODEL ANSWER
-N1;
cout<<"\n After negation:";
N1. display ();
getch();
}
b) Write a C++ program to append data from abc.txt to xyz.txt file. 6M

Ans. Assuming input file as abc.txt with contents "World" and output file
named as xyz.txt with contents "Hello" have been already created.
#include <iostream.h>
#include<fstream.h>
int main()
{
fstream f;
ifstream fin;
fin.open("abc.txt",ios::in);
ofstream fout;
fout.open("xyz.txt", ios::app);
if (!fin)
{ Correct
cout<< "file not found"; logic
} 3M
else
{ Correct
fout<<fin.rdbuf(); Syntax
} 3M
char ch;
f.seekg(0);
while (f)
{
f.get(ch);
cout<< ch;
}
f.close();
return 0;
}
Page 17 / 23
(Autonomous)

MODEL ANSWER
Output:
Hello World
c) Write a C++ program to declare a class student with members as 6M
roll no, name and department. Declare a parameterized
constructor with default value for department as ‘CO’ to
initialize members of object. Initialize and display data for two
students.
#include<conio.h>
#include<string.h>
class student Class
{ student
int roll_no; 1M
char name[20],department[40];
public:
student(int rno,char *n,char *d="CO") Constru
{ ctor
roll_no=rno; definitio
strcpy(name,n); n with
strcpy(department,d); default
} value
void display() 2M
{
cout<<"\n Roll No:"<<roll_no; Display
cout<<"\n Name:"<<name; function
cout<<"\n Department:"<<department; definitio
} n 1M
};
void main()
{
student s1(112," Chitrakshi"),s2(114,"Anjali");
clrscr(); Main
s1.display(); function
s2.display(); definitio
getch(); 2M
}
Page 18 / 23
(Autonomous)

MODEL ANSWER

a) (i) Describe structure of C++ program with diagram. 6M
(ii) Write a C++ program to add two 3 x 3 matrices and display
addition.
(i) Describe structure of C++ program with diagram.

Ans.
INCLUDE HEADER FILES Correct
DECLARE CLASS diagram
1M
DEFINE MEMBER FUNCTIONS
DEFINE MAIN FUNCTION
Description:-
1. Include header files
In this section a programmer include all header files which are
require to execute given program. The most important file is
iostream.h header file. This file defines most of the C++statements
like cout and cin. Without this file one cannot load C++ program.
2. Declare Class
In this section a programmer declares all classes which are necessary Descript
for given program. The programmer uses general syntax of creating ion 2M
class.
3. Define Member Functions
This section allows programmer to design member functions of a
class. The programmer can have inside declaration of a function or
outside declaration of a function.
4. Define Main Functions
This section the programmer creates object and call various functions
writer within various class.
(ii) Write a C++ program to add two 3 x 3 matrices and display

addition.
#include<conio.h>
void main()
{
clrscr();
Page 19 / 23
(Autonomous)

MODEL ANSWER
int mat1[3][3], mat2[3][3], i, j, mat3[3][3];

cout<<"Enter matrix 1 elements :";
for(i=0; i<3; i++)
{
for(j=0; j<3; j++) Acceptin
{ g two
cin>>mat1[i][j]; matrices
} 1M
}
cout<<"Enter matrix 2 elements :";
for(i=0; i<3; i++)
{
for(j=0; j<3; j++)
{
cin>>mat2[i][j];
}
}
cout<<"Adding the two matrix to form the third matrix\n";
for(i=0; i<3; i++)
{ Adding
for(j=0; j<3; j++) two
{ matrices
mat3[i][j]=mat1[i][j]+mat2[i][j]; 1M
}
}
cout<<"The two matrix added successfully...!!";
cout<<"The new matrix will be :\n"; Displayi
for(i=0; i<3; i++) ng
{ addition
for(j=0; j<3; j++) 1M
{
cout<<mat3[i][j]<<" ";
}
cout<<"\n";
}
getch();
}
Page 20 / 23
(Autonomous)

MODEL ANSWER
b) Write a program to swap two integers using call by reference 6M

method.
#include<conio.h>
void swap(int*p, int*q)
{
int t;
t=*p;
*p=*q;
*q=t; Correct
} logic
void main() 3M
{
int a,b; Correct
float x,y; Syntax
clrscr(); 3M
cout<<"Enter values of a and b\n";
cin>>a>>b;
cout<<"Before swapping\n";
cout<<"a="<<a<<"\tb="<<b<<endl;
swap(&a, &b);
cout<<"After swapping\n";
cout<<"a="<<a<<"\tb="<<b<<endl;
getch();
}
c) Write a C++ program to implement following in heritance. Refer 6M
Figure No.2:
Accept and display data for one object of class result (Hint: use
virtual base class).
Page 21 / 23
(Autonomous)

MODEL ANSWER

Ans. # include <iostream.h>
#include<conio.h>
class College_Student
{
int student_id;
char College_code[5];
public:
void read_collegeStud_Data()
{
cout<<”Enter college code and student id\n”; Each
cin>>college_code>>student_id; class
} (four
void display_collegeStud_Data() classes)
{ definitio
cout<<”\ncollege code\tstudent id\n”; n 1M
cout<<college_code<<”\t”<<student_id<<”\n”;
}
};
Use of
class test: virtual public College_Student virtual
{ base
float percentage; class 1M
public:
void read_test()
{
cout<<”\n Enter test percentage\n”; Main
cin>> percentage; function
} definitio
void display_test() n 1M
{
cout<<”\n test percentage:”<<percentage;
}
};
class sports: virtual public College_Student
{
char grade[5];
public:
void read_sportsData()
Page 22 / 23
(Autonomous)

MODEL ANSWER
{
cout<<”\n Enter sport grade\n”;
cin>> grade;
}
void display_sportsData()
{
Cout<<”\n sport grade:”<<grade;
}
};
{
public:
void read_result()
{
read_collegeStud_Data() ;
read_test()
read_sportsData();
}
void display_result()
{
display_collegeStud_Data() ;
display_test()
display_sportsData();
}
};
void main()
{
result r;
clrscr();
r.read_result();
r.display_result();
}
Page 23 / 23
(Autonomous)

MODEL ANSWER
Subject: Object Oriented Programming with C++ Subject Code: 22316
answer scheme.
values may vary and there may be some difference in the candidate’s answers and model
answer.
answer based on candidate’s understanding.
equivalent concept.

No Q.N. Scheme
.
1. Attempt any FIVE of the following: 10
a) State any four object oriented languages. 2M
Ans. Object oriented programming language:
 C++
 Smalltalk Any 4
 Object pascal languag
 java es ½ M
 Simula each
 Ada
 Turbo pascal
 Eiffel
 C#
 Python
b) Describe use of protected access specifier used in the class. 2M
Ans. Protected access specifier is use to declare a class member that is Correct
accessible by the member functions within its class and any class use 2M
immediately derived from it.
Page 1 / 25
(Autonomous)

MODEL ANSWER
c) Differentiate between OOP and POP 2M

Ans
Sr. PROCEDURE OBJECT ORIENTED
No. ORIENTED PROGRAMMING
PROGRAMMING (POP) (OOP)
1 Focus is on doing things Focus is on data rather than Any two
(procedure). procedure. relevant
2 Large programs are divided Programs are divided into differen
into multiple functions. multiple objects. ces
3 Data move openly around Data is hidden and cannot 1M each
the system from function to be accessed by external
function. functions.
4 Functions transform data Objects communicate with
from one form to another each other through function.
by calling each other.
5 Employs top-down Employs bottom-up
approach in program approach in
design. program design
6 Procedure oriented Object oriented approach is
approach is used in C used in
language. C++ language.
d) Write any two characteristics of destructor. 2M
Ans. Characteristics:
1. It is used to destroy objects created by a constructor.
2. Name of destructor and name of the class is same. Any two
3. Its name is preceded with tilde (~) symbol. characte
4. It never takes any argument. ristics-
5. It does not return any value. 1M each
6. It is invoked implicitly by the compiler upon exit from the
program (or block or function) i.e when scope of object is over.
e) Describe meaning of the following 2M
(i) ios : : in
(ii) ios : : out Meanin
Ans. (i) ios : : in : It is a file mode. It is used to open a file in read only g of ‘in’
mode. 1M
Meanin
(ii) ios : : out : It is a file mode. It is used to open a file in write only g of
mode. ‘out’
1M
Page 2 / 25
(Autonomous)

MODEL ANSWER
f) Give output for following code: 2M

class student
{
int roll no;
char name [14];
} s[6];
void main()
{
cout<<sizeof(s);
}
Ans Considering roll_no(Single variable) the output is: 96 Correct
OR output
Considering roll, no (Two variables) the output is: 108 2M
OR
Considering roll no the output is: error – space between roll and no
g) Write syntax to define a derived class 2M
Ans Syntax:
class derived_class_name : visibility_mode/access_specifier Correct
base_class_name syntax
{ 2M
class body
};
2 Attempt any THREE of the following 12

a) Write a C++ program to accept array of five elements, find and 4M
display smallest number from an array.
Ans #include<iostream.h> Correct
#include<conio.h> logic
void main() 2M
{
int a[5],smallest,i;
clrscr(); Correct
cout<<" Enter array elements:"; syntax
for(i=0;i<5;i++) 2M
cin>>a[i];
smallest=a[0];
for(i=1;i<5;i++)
{
if(a[i]<smallest)
Page 3 / 25
(Autonomous)

MODEL ANSWER
{
smallest=a[i];
}
}
cout<<endl<<"Smallest number="<<smallest;
getch();
}
b) Write a C++ program to declare a class ‘College’ with data 4M
members as name and college code. Derive a new class ‘student’
from the class college with data members as sname and roll no.
Accept and display details of one student with college data.
Ans #include<iostream.h> Declarat
#include<conio.h> ion and
class college Definitio
{ n of
char name[10]; Base
int collegecode; Class
public: 1M
void getcollege()
{ Declarat
cout<<"Enter college name:"; ion and
cin>>name; Definitio
cout<<"Enter college code:"; n of
cin>>collegecode; Derived
} Class
void putcollege() 2M
{
cout<<endl<<"College name="<<name; Main
cout<<endl<<"College code="<<collegecode; function
} 1M
};
class student:public college
{
char sname[10];
int rollno;
public:
void getstudent()
{
cout<<"Enter student name";
Page 4 / 25
(Autonomous)

MODEL ANSWER
cin>>sname;
cout<<"Enter roll no:";
cin>>rollno;
}
void putstudent()
{
cout<<endl<<"Student name:="<<sname;
cout<<endl<<"Roll no:="<<rollno;
}
};
void main()
{
student s;
clrscr();
s.getcollege();
s.getstudent();
s.putcollege();
s.putstudent();
getch();
}
c) Write a C++ program to declare a class ‘circle’ with data 4M

members as radius and area. Declare a function getdata to accept
radius and putdata to calculate and display area of circle.
Ans #include<iostream.h>
#include<conio.h> Decalar
class circle ation
{ and
float radius,area; Definitio
public: n of
void getdata() class
{ with
cout<<"Enter radius:"; function
cin>>radius; s
} 3M
void putdata()
{
area=3.14*radius*radius;
cout<<"Area of circle="<<area;
Page 5 / 25
(Autonomous)

MODEL ANSWER
}
};
void main()
{ Main
circle c; function
clrscr(); 1M
c.getdata();
c.putdata();
getch();
}
d) With suitable example, describe effect of ++ and - - operators 4M

used with pointer in pointer arithmetic.
Ans. ++ Operator: - It is referred as increment operator that increments the
value of variable. If ++ operator is used with pointer variable, then Descript
pointer variable points to next memory address that means pointer ion of
increment with respect to size of the data type used to declare pointer ++
variable. operator
1M
Example:-
int a[5]={10,20,30,40,50},*ptr;
ptr=a[0]; Any
for(i=0;i<5;i++) relevant
{ Example
cout<<*ptr; 1M
ptr++;
}
In the above example, ptr points to memory location of a[0].
Increment statement ptr++ increments ptr by memory size of int i.e 2
bytes and ptr points to a[1].
- - Operator: - It is referred as decrement operator that decrements Descript

the value of variable. If - - operator is used with pointer variable, then ion of - -
pointer variable points to previous memory address that means operator
pointer decrement with respect to size of the data type used to declare 1M
pointer variable.
Page 6 / 25
(Autonomous)

MODEL ANSWER
Example:- Example
int a[5]={10,20,30,40,50},*ptr; 1M
ptr=a[4];
for(i=0;i<5;i++)
{
cout<<*ptr;
ptr- -;
}
In the above example, ptr points to memory location of a[4].

Decrement statement ptr- - decrements ptr by memory size of int i.e 2
bytes and ptr points to a[3].

a) Write a C++ program to declare a class addition with data 4M
members as x and y. Initialize values of x and y with constructor.
Calculate addition and display it using function ‘display’.
#include<conio.h>
class addition
{ Declarat
int x,y; ion and
public: definitio
addition(int,int); n of
void display(); class
}; with
addition::addition (int x1,int y1) construc
{ tor and
x=x1; display
y=y1; function
} 3M
void addition::display()
{
cout<<"\nAddition of two numbers is:"<<(x+y);
} Main
void main() function
{ 1M
addition a(3,4);
Page 7 / 25
(Autonomous)

MODEL ANSWER
a.display();
getch();
}
b) With suitable diagram describe structure of C++ program. 4M

Ans General C++ program has following structure.
INCLUDE HEADER FILES Correct

diagram
CLASS DECLARATION 2M
MEMBER FUNCTIONS DEFINITIONS
MAIN FUNCTION PROGRAM
Description:-
1. Include header files
In this section a programmer include all header files which are
require to execute given program. The most important file is
iostream.h header file. This file defines most of the C++statements Descript
like cout and cin. Without this file one cannot load C++ program. ion 2M
2. Class Declaration
In this section a programmer declares all classes which are necessary
for given program. The programmer uses general syntax of creating
class.
3. Member Functions Definition
This section allows programmer to design member functions of a
class. The programmer can have inside declaration of a function or
outside declaration of a function.
4. Main Function Program
In this section programmer creates objects and calls various functions
writer within various class.
c) Describe the concept of virtual base class with suitable example. 4M

Note: Program/diagram with syntax shall be considered as an
example.
Ans. Virtual Base Class:
An ancestor class is declared as virtual base class which is used to Descript
avoid duplication of inherited members inside child class due to ion
multiple path of inheritance. 2M
Page 8 / 25
(Autonomous)

MODEL ANSWER
Consider a hybrid inheritance as shown in the above diagram. The

child class has two direct base classes, Parent1 and Parent2 which
themselves have a common base class as Grandparent. The child
inherits the members of Grandparent via two separate paths. All the
public and protected members of Grandparent are inherited into Child
twice, first via Parent1 and again via Parent2. This leads to duplicate
sets of the inherited members of Grandparent inside Child class. The
duplication of inherited members can be avoided by making the
common base class as virtual base class while declaring the direct or
intermediate base classes as shown below.
class Grandparent
{
};
class Parent1:virtual public Grandparent
{ Example
}; 2M
class Parent2:virtual public Grandparent
{
};
class Child: public Parent1,public Parent2
{
};
Example
#include<conio.h>
class student
{
int rno;
Page 9 / 25
(Autonomous)

MODEL ANSWER
public:
void getnumber()
{
cout<<"Enter Roll No:";
cin>>rno;
}
void putnumber()
{
cout<<"\n\n\t Roll No:"<<rno<<"\n";
}
};
class test: virtual public student
{
public:
int part1,part2;
void getmarks()
{
cout<<"Enter Marks\n";
cout<<"Part1:";
cin>>part1; cout<<"Part2:";
cin>>part2;
}
void putmarks()
{
cout<<"\t Marks Obtained\n";
cout<<"\n\t Part1:"<<part1;
cout<<"\n\tPart2:"<<part2;
}
};
class sports: public virtual student
{
public:
int score;
void getscore()
{
cout<<"Enter Sports Score:";
cin>>score;
}
void putscore()
Page 10 / 25
(Autonomous)

MODEL ANSWER
{
cout<<"\n\t Sports Score is:"<<score;
}
};
{
int total;
public:
void display()
{
total=part1+part2+score;
putnumber();
putmarks();
putscore();
cout<<"\n\t Total Score:"<<total;
}
};
void main()
{
result obj;
clrscr();
obj.getnumber();
obj.getmarks();
obj.getscore();
obj.display();
getch();
}
d) Describe use of static data member in C++ with example. 4M
Ans Use of static data member:
1. Static data member is used to maintain values common to the entire Use of
class. static
2. It is initialized to zero when the first object of its class is created. data
3. Only one copy of that member is created for the entire class and is member
shared by all the objects of that class. 2M
Example:
#include<iostream.h> Relevant
#include<conio.h> example
class test 2M
{
Page 11 / 25
(Autonomous)

MODEL ANSWER
static int count;
int obj_no;
public:
void getdata()
{
obj_no=++count;
cout<<"\n Object number="<<obj_no;
}
static void showcount()
{
cout<<"\n total number of objects="<<count;
}
};
int test::count;
void main()
{
test t1,t2;
clrscr();
t1.getdata();
t2.getdata();
test::showcount();
test t3;
t3.getdata();
test::showcount();
getch();
}

a) Write a C++ program to implement inheritance shown in 4M
following figure:
Accept and display data of one teacher and one student using
object of class ‘Info’
Note: Any other correct logic of multiple inheritance in program
shall be considered.
Page 12 / 25
(Autonomous)

MODEL ANSWER
Ans #include<conio.h> Correct
class Teacher definitio
{ n of
protected: class -
char Name[20]; Teacher
int empid; 1M
};
class Student Correct
{ definitio
protected: n of
char sname[20]; class-
int rollno; Student
}; 1M
class Info:public Teacher,public Student
{ Correct
public: definitio
void acceptT() n of
{ class-
cout<<"\nEnter data for teacher:"; Info
cout<<"\nName:"; 1M
cin>>Name;
cout<<"\nEmployee id:";
cin>>empid;
}
void displayT()
{
cout<<"\nTeacher's data is:";
cout<<"\nName:"<<Name;
cout<<"\nEmployee id:"<<empid;
}
void acceptS()
{
cout<<"\nEnter student's data:";
cout<<"\nName:";
cin>>sname;
Page 13 / 25
(Autonomous)

MODEL ANSWER
cout<<"\nRoll no:";
cin>>rollno;
}
void displayS()
{
cout<<"\nStudent's data is:";
cout<<"\nName:"<<sname;
cout<<"\nRoll no:"<<rollno;
}
}; Correct
void main() definitio
{ n of
Info I; main
clrscr(); function
I.acceptT(); 1M
I.displayT();
I.acceptS();
I.displayS();
getch();
}
b) Write a C++ program to print multiplication table of 7. 4M

(example: 7 x 1 ….7 x 10 = 70)
void main() 2M
{
int num;
clrscr();
cout<<"Multiplication table for 7 is:"<<endl; Correct
for(num=1;num<=10;num++) syntax
{ 2M
cout<<"7 *"<<num<<"="<<7*num<<endl;
}
getch();
}
c) Write a C++ program to swap two integer numbers and swap two 4M
float numbers using function overloading.
Page 14 / 25
(Autonomous)

MODEL ANSWER
(Hint: overload swap function)

Note: Any other relevant logic shall be considered.

void swap(int a,int b) 2M
{
int temp; Correct
temp=a; syntax
a=b; 2M
b=temp;
cout<<"\nInteger values after swapping are:"<<a<<" "<<b;
}
void swap(float x,float y)
{
float temp1=x;
x=y;
y=temp1;
cout<<"\nFloat values after swapping are:"<<x<<" "<<y;
}
void main()
{
clrscr();
swap(10,20);
swap(10.15f,20.25f);
getch();
}
d) Write a C++ program to count number of spaces present in 4M

contents of file.
Note: Any other relevant logic shall be considered
#include<fstream.h> logic
#include<conio.h> 2M
void main()
{
ifstream file;
charch; Correct
Page 15 / 25
(Autonomous)

MODEL ANSWER
int s=0; syntax
clrscr(); 2M
file.open("abc.txt");
while(file)
{
file.get(ch);
if(ch==' ')
{
s++;
}
}
cout<<"\nNumber of spaces present in the content of the given file
are:"<<s;
getch();
}
e) Write a C++ program to find greatest number among two 4M

numbers from two different classes using friend function.
#include<conio.h>
class second;
class first
{
int x;
public: Correct
void getx() definitio
{ n of
cout<<"\nEnter the value of x:"; class
cin>>x; first
} 1M
friend void max(first,second);
};
class second
{
int y; Correct
public: definitio
void gety() n of
{ class
cout<<"\nEnter the value of y:"; second
Page 16 / 25
(Autonomous)

MODEL ANSWER
cin>>y; 1M
}
friend void max(first,second);
};
void max(first a,second b) Correct
{ definitio
if(a.x>b.y) n of
{ friend
cout<<"\Greater value is:"<<a.x; function
} 1M ,
else
{
cout<<"\nGreater value is:"<<b.y;
}
}
void main() Correct
{ definitio
first a; n of
second b; main
clrscr(); function
a.getx(); 1M
b.gety();
max(a,b);
getch();
}
5 Attempt any TWO of the following 12

a) Write a C++ program to overload binary operator ‘+’ to 6M
concatenate two strings.
#include<conio.h> Creating
#include<string.h> Class
class opov 2M
{
char str1[10];
public: Operato
void getdata() r
{ Functio
Page 17 / 25
(Autonomous)

MODEL ANSWER
cout<<"\nEnter a strings"; n
cin>>str1; 2M
}
void operator +(opov o)
{
cout<<strcat(str1,o.str1);
}
};
void main() Main
{ Functio
opov o1,o2; n
clrscr(); 2M
o1.getdata();
o2.getdata();
o1+o2;
getch();
}
b) Write a C++ program to write ‘Welcome to poly’ in a file. Then 6M

read the data from file and display it on screen.
Note: Any other relevant logic shall be considered
#include<conio.h> Writing
#include<fstream.h> data in
void main() file
{ 3M
char str[25] = "Welcome to poly",ch;
clrscr(); Reading
ofstream fout; data
fout.open("output.txt"); from file
fout<<str; and
fout.close(); display
ifstream fin; on
fin.open("output.txt"); screen
while (!fin.eof()) 3M
{
fin.getline(str, 25);
cout<<str<<endl;
}
Page 18 / 25
(Autonomous)

MODEL ANSWER
fin.close();
getch();
}
c) Write a C++ program to declare a class ‘Account’ with data 6M
members as accno, name and bal. Accept data for eight accounts
and display details of accounts having balance less than 10,000.
#include<conio.h> Creating
class Account Class
{ 2M
long int accno, bal;
char name[10]; Logic to
public: Display
void getdata() object
{ with
cout<<"\nEnter account number, balance and name "; given
cin>>accno>>bal>>name; conditio
} n
void putdata() 1M
{
if(bal>10000) Creating
{ 8 objects
cout<<"\nThe Account Number is "<<accno; 1M
cout<<"\nThe Balance is "<<bal;
cout<<"\nThe Name is "<<name;
} Calling
} function
}; s
void main() 2M
{
Account a[8];
int i;
clrscr();
for(i=0;i<8;i++)
{
a[i].getdata();
}
for(i=0;i<8;i++)
{
Page 19 / 25
(Autonomous)

MODEL ANSWER
a[i].putdata();
}
getch();
}
6 Attempt any TWO of the following 12
a) (i) Write a C++ program to find whether the entered number is 6M
even or odd.
(ii) Write a C++ program to declare a structure employee with
members as empid and empname. Accept and display data for
one employee using structure variable.
Ans (i) Write a C++ program to find whether the entered number is
even or odd.
Acceptin
#include<iostream.h> g
#include<conio.h> Number
void main() 1M
{
int num; Conditio
clrscr(); n to
cout<<"\nEnter a Number "; check
cin>>num; number
if(num%2==0) 1M
{
cout<<"\nEntered number is even"; Display
} result
else 1M
{
cout<<"\nEntered number is odd";
}
getch();
}
(ii) Write a C++ program to declare a structure employee with

members as empid and empname. Accept and display data for
one employee using structure variable.
#include<iostream.h> Creating
#include<conio.h> structur
Page 20 / 25
(Autonomous)

MODEL ANSWER
struct employee e with
{ specified
int empid; member
char empname[10]; 1M
};
void main()
{ Acceptin
employee e; g and
clrscr(); displayi
cout<<"\nEnter employee id and Employee Name "; ng
cin>>e.empid>>e.empname; values
cout<<"\mThe Employee Id is "<<e.empid; 2M
cout<<"\nThe Employee Name is "<<e.empname;
getch();
}
b) Write a C++ program to implement following inheritance. 6M
Accept and display data for one programmer and one manager.
Make display function virtual.
#include<conio.h>
class Employee
{
int empid,empcode;
public: Creating
void emp() all
{ classes
cout<<"\nEnter an employee id "; 3M
cin>>empid;
cout<<"\nEnter an employee code ";
cin>>empcode;
Page 21 / 25
(Autonomous)

MODEL ANSWER
}
void virtual display()
{
cout<<"\nEmployee id "<<empid;
cout<<"\nEmployee code"<<empcode;
}
};
class Programmer : public Employee
{
char Skill[10];
public:
void getskill()
{
cout<<"\nEnter a Skill for Programmer ";
cin>>Skill;
}
void display()
{
cout<<"\nThe Programmer Skill is "<<Skill;
}
};
class Manager : public Employee
{
char department[10];
public:
void getdept()
{
cout<<"\nEnter a Department for Manager ";
cin>>department;
}
void display()
{
cout<<"\nThe Department of Manager is "<<department;
}
};
void main() Main
{ Functio
Employee e, *eptr; n
Programmer p; 3M
Page 22 / 25
(Autonomous)

MODEL ANSWER
Manager m;
clrscr();
cout<<"\nFor Programmer Class ";
eptr = &e;
eptr->emp();
p.getskill();
eptr->display();
eptr= &p;
eptr->display();
cout<<"\nFor Manager Class ";

eptr = &e;
eptr->emp();
m.getdept();
eptr->display();
eptr= &m;
eptr->display();
getch();
}
c) Write a C++ program for following multilevel inheritance. 6M
Accept and display data for one car with all details.
#include<conio.h>
class Carmanufacturer
{ Declarat
char Name[10];
Page 23 / 25
(Autonomous)

MODEL ANSWER
public: ion &
void getcarm() Definitio
{ n of all
cout<<"\nEnter Car Name "; classes
cin>>Name; 3M
}
void putcarm()
{
cout<<"\nThe Car Name is "<<Name;
}
};
class Carmodel : public Carmanufacturer
{
char Modelname[10];
int Modelno;
public:
void getcarmodel()
{
cout<<"\nEnter Car Model Name and Model No. ";
cin>>Modelname>>Modelno;
}
void putcarmodel()
{
cout<<"\nEnter Car Model Name and Model No.
"<<Modelname<<" "<<Modelno;
}
};
class Car: public Carmodel
{
char colour[10], Carno[10];
public:
void getcar()
{
cout<<"\nEnter Car colour and car number";
cin>>colour>>Carno;
}
void putcar()
{
Page 24 / 25
(Autonomous)

MODEL ANSWER
cout<<"\nEnter Car colour and car number "<<colour<<"
"<<Carno;
}
};
void main()
{
Car c;
clrscr();
c.getcarm();
c.getcarmodel(); Main
c.getcar(); function
c.putcarm(); 3M
c.putcarmodel();
c.putcar();
getch();
}
Page 25 / 25

1 Oop

Uploaded by

Copyright:

Available Formats

1 Oop

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1 Oop

Uploaded by

Copyright:

Available Formats

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION

WINTER – 2019 EXAMINATION

Important Instructions to examiners:

Q. Sub Answer Marking

WINTER – 2019 EXAMINATION

6 Object oriented approach is Procedure oriented

c) What is multilevel inheritance? Draw the diagram to show 2M

d) Explain use of scope resolution operator. 2M

WINTER – 2019 EXAMINATION

to which a member function belongs. Scope resolution operator is

g) Give syntax and use of fclose ( ) function. 2M

WINTER – 2019 EXAMINATION

Fig: Memory allocation for objects

(Note: Any other correct logic shall be considered)

WINTER – 2019 EXAMINATION

class emp_info:public employee

WINTER – 2019 EXAMINATION

WINTER – 2019 EXAMINATION

class derived-class-name: visibility-mode base-class-name

WINTER – 2019 EXAMINATION

-----// members of derived class

3) Hierarchical inheritance: In hierarchical inheritance, more than

4) Multilevel inheritance: In multilevel inheritance, a derived class

WINTER – 2019 EXAMINATION

derived from a single base class.

5) Hybrid inheritance: Hybrid inheritance is a combination of

d) What are the rules for virtual function? 4M

WINTER – 2019 EXAMINATION

decrementing it will not make it to point to the next object of the

WINTER – 2019 EXAMINATION

b) Write a program to sort an 1-d array in ascending order. 4M

WINTER – 2019 EXAMINATION

other‟s private data. So a common function can be declared which

WINTER – 2019 EXAMINATION

WINTER – 2019 EXAMINATION

WINTER – 2019 EXAMINATION

WINTER – 2019 EXAMINATION

as the objects of the derived class.

WINTER – 2019 EXAMINATION

cout<<"\n Enter book‟s title, author_name, publication and price \n:";

WINTER – 2019 EXAMINATION

WINTER – 2019 EXAMINATION

(Note: Any other correct logic shall be considered)

WINTER – 2019 EXAMINATION

WINTER – 2019 EXAMINATION

c) Write a program to overload the ‘—’ unary operator to negate 6M

SUMMER – 2019 EXAMINATION

Important Instructions to examiners:

Q. Sub Answer Marking

SUMMER – 2019 EXAMINATION

operator is used to refer variable of class anywhere in program.

SUMMER – 2019 EXAMINATION

Displays value of a i.e. value at address stored inside ptr. It displays

SUMMER – 2019 EXAMINATION

class STUDENT:public COLLEGE Definitio

SUMMER – 2019 EXAMINATION

d) Differentiate between run time and compile time polymorphism. 4M

SUMMER – 2019 EXAMINATION