Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    MT 20 MS

    Uploaded by

    HAPPY CHAUHAN
    This document appears to be a test for a manufacturing technology course, containing 6 multi-part questions about various manufacturing processes and casting defects. It includes questions about the differences between grey cast iron and aluminum casting; the use of draft allowances in pattern moulding; trapping slag in pouring basins and runners; the advantages of cold chamber versus hot chamber die casting for aluminum; the purpose of directional solidification; and preparing standard test specimens for permeability testing of green sand.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MT 20 MS

    Uploaded by

    HAPPY CHAUHAN
    14 views2 pages
    This document appears to be a test for a manufacturing technology course, containing 6 multi-part questions about various manufacturing processes and casting defects. It includes questions about the differences between grey cast iron and aluminum casting; the use of draft allowances in pattern moulding; trapping slag in pouring basins and runners; the advantages of cold chamber versus hot chamber die casting for aluminum; the purpose of directional solidification; and preparing standard test specimens for permeability testing of green sand.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document appears to be a test for a manufacturing technology course, containing 6 multi-part questions about various manufacturing processes and casting defects. It includes questions about the differences between grey cast iron and aluminum casting; the use of draft allowances in pattern moulding; trapping slag in pouring basins and runners; the advantages of cold chamber versus hot chamber die casting for aluminum; the purpose of directional solidification; and preparing standard test specimens for permeability testing of green sand.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views2 pages

    MT 20 MS

    Uploaded by

    HAPPY CHAUHAN
    This document appears to be a test for a manufacturing technology course, containing 6 multi-part questions about various manufacturing processes and casting defects. It includes questions about the differences between grey cast iron and aluminum casting; the use of draft allowances in pattern moulding; trapping slag in pouring basins and runners; the advantages of cold chamber versus hot chamber die casting for aluminum; the purpose of directional solidification; and preparing standard test specimens for permeability testing of green sand.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    - 269

    Total No. of Pages :02 Roll No. .


    FOURTHSEMESTER B.TechtE
    MID SEM. EXAMINATION (MARCH-2020)
    ME 208: MANUFACTURING TECHNOLOGY-1
    Time: 1 Hour 30 Minutes Max. Marks:30

    Note: Answer ALL questions.


    Assume suitable missing data, if ány.

    1 (a) Why does a grey cast iron casting require less riser size than
    aluminum casting ofa same size?
    (b) Should an allowance be provided for draft in an expendable
    pattern moulding? Justify your answer suitably?
    (c) How can slag be trapped in pouring basin and runner?
    (d) Why is aluminum preferred to be cast by cold chamber die casting
    than hot chamber die casting?
    (e) What is directional solidification and why does directional
    solidification necessary to produce sound casting? 5

    [2] Discuss the following briefly.


    (a) Plasma and its creation
    (b) Horizontal welding.position--
    (c) Duty cycle
    (d) Selection of polarity in arc welding
    () Constant voltage type power source and its applications 5

    3] How is a standard test specimen prepared for testing the


    permeability of green sand? With a neat sketch describe the method
    used to determine the permeability number of moulding sand. 5

    4] With a neat sketch explain the true centrifugal casting process. Also
    discuss its advantages, disadvantages and specific
    applications. 5
    P.T.O
    270
    5] List various casting defects and differentiate between the following
    casting defects with reference to the causes and method of prevention.
    () Blow holes and pin holes (i) Cold shuts and misruns (ii) Rat tail
    and buckles 5

    [6] With a neat sketch explain the working principle of SAW. List its
    applications and also compare its advantages and disadvantages with
    SMAW.
    5

    END

    You might also like