Oilfield Instruments Catalogue

OILFIELD INSTRUMENTS
PRODUCT CATALOG 2016
DRILLING INSTRUMENTATION
...Quality is Everything...
Contact Rigchina Group Company for more information on our complete line of Oilfield
Instruments, drilling fluids testing equipment and instrumentation for oil and gas industry.
Call us today, or visit our website at www.rigchina.com
© Copyright 1996-2016 Rigchina Group Company All rights reserved.
Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA
Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321300

CONTENTS
1. Pressure Indicating System ........................................... 2
1.1 Mud Pump Pressure Gauges........................................................................................................... 2
1.2 Pressure Indicator System ............................................................................................................ 11
1.3 Pressure Indicator W/Shut-off Switch systems GM-7A.................................. 15
2. Deadline Anchors & Weight Indicator Systems ............ 20

2.1 Anchor Type Weight Indicators-Indicator System ............................................... 20
2.2 Deflection-type (Clipper) Weight Indicator ................................................................. 23
2.3 Wireline Weight Indicators ........................................................................................................... 25
2.4 Deadline Anchors ..................................................................................................................................... 26
3. Pump Stroke Counter/Rate Meter Model PSC-3 ........... 30
4. Model CMM100 Mechanical Sandline Depthometer....... 32
5. Mechanical Dynamometer Model GLG-02 ..................... 33
6. Tong Torque and Tong Line Pull Indication Systems .... 34
6.1 Universal Tong Line Pull Series: .............................................................................................. 34
6.2 Tong Torque (Joint Torque) Series: ..................................................................................... 34
7. Mechanical Rotary Torque System ............................... 36
8. Warranty and Returns.................................................. 37

8.1 Warranty ........................................................................................................................................................... 37
8.2 Returns ............................................................................................................................................................... 37


1. PRESSURE INDICATING SYSTEM
1.1 MUD PUMP PRESSURE GAUGES

Rugged standpipe-type gauges provide dependable, accurate pressure readings
RIGCHINA Stand Pipe Gauges provide a quick, accurate display of pump pressure. Main
applications are for standpipes and to be mounted on mud pumps. This style of gauge has been
in service for many years and has proven to be a tough, dependable and reliable way to monitor
pump pressure.
Interchangeable with Cameron type gauges
Temerature range -20 to 250(-29 to 121)
3 gauge models offering a multitude of sizes,pressure ranges and sub end conections
Sub end connections made from steel,stainless steel or bronze.
Dial ranges in PSI,BAR,KGC and KPA.
Model 8 gauges offer dual unit of measure.
Cases made with aluminum .
Sour gas and charpy available.
Flanged subs can have inconel or stainless steel inlays
Hummer Union end and Flange connections.
Xylan coated high pressure adapters
Pressure plug on backside for safely.


TYPE F PRESSURE GAUGE (MODEL 6)

Model F Gauge (Model 6) for capacities up to 20,000 PSI
STANDPIPE UNION FLANGE
FEATURES:
Diameter: 4-7/8"(124 mm), Height: 10-1/16" (256 mm)


Pressure range:
7MPa, 14MPa, 21MPa, 25MPa, 35MPa, 40MPa, 60MPa, 80MPa, 100MPa, 120Mpa,160MPa
1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI, 15,000 PSI and 20,000PSI
70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar, 1,040 Bar and 1,400 Bar
Temperature range: -50°F to 180°F
Liquid surrounding gauge mechanism minimizes wear from vibration and mechanical shock
Heavy duty seals create watertight barrier around gauge mechanism
Combination threaded male 2" line pipe and threaded female 1" line pipe connection
TYPE D PRESSURE GAUGE (MODEL 7)

Model D Gauge for capacities up to 6,000 PSI
STANDPIPE FLANGE
FEATURES:
Standard capacities of:
1,000 p.s.i., 3,000 p.s.i. 5,000 p.s.i and 6,000 p.s.i.
70 Bar, 210 Bar 350 and 420 Bar
* 2" Nutted version available


Diameter: 7-5/8"(194 mm), Height: 14-3/16"(360 mm)
Impact resistant, clear polymer lens
Connects with threaded female 2" line pipe


TYPE E PRESSURE GAUGE (MODEL 8)

Model 8 Gauge for capacities up to 20,000 PSI
Dial sizes: 8-1/8" (206 mm) dials
STANDPIPE
UNION


FLANGE
FEATURES:
7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,100MPa,120MPa and 160MPa

1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI,15,000 PSI and 20,000PSI
70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar,1,040 Bar and 1,400 Bar
Accuracy: ± 1.6% of full range
Threaded:2” LPT male with 1” LPT female
TYPE RC-100 PRESSURE GAUGE

Model RC-100 Gauge for capacities up to 20,000 PSI
STANDPIPE FIG

FEATURES:

Dial sizes: 124 mm dials
Threaded:2” LPT male with 1” LPT female or 2” LPT female
TYPE RC-150 PRESSURE GAUGE

Model RC-150 Gauge for capacities up to 20,000 PSI
STANDPIPE UNION FLANGE
FEATURES:

Dial sizes: 100 and 150 mm dials
Threaded:2” LPT male with 1” LPT female or 2” LPT Female


Main Technical Specification

Part-No. Model Description &Technical Parameters Remarks

Pressure Range:
7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,
100MPa,120MPa and 160MPa
125-6 F(6) 1,000 PSI,1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI,
10,000 PSI,15,000 PSI and 20,000PSI
70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar,
1,040 Bar and 1,400 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Weight: 11lb (5 kg)

Pressure Range:
7MPa,14MPa,21MPa,25MPa,35MPa,40MPa and60MPa
200-7 D(7)
1,000 PSI,1500PSI 3,000 PSI. 5,000 PSI and 6,000 PSI,
70 Bar, 140 Bar, 210 Bar, 350Bar and 420 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Weight: 33lb (15 kg)

Threaded:2” LPT male with 1” LPT female
Pressure Range:
200-8 8
1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI,
10,000 PSI,15,000 PSI and 20,000PSI
1,040 Bar and 1,400 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Weight: 26.4lb (12 kg)
200-8U 8U Dial sizes: 8-1/8" (206 mm) dials



Threaded:UNION,2” FIG.1502 Male
UNION,2” FIG.2002 Male
UNION,3” FIG.1502 Female
Pressure Range:
10,000 PSI,15,000 PSI and 20,000PSI
1,040 Bar and 1,400 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Threaded:FLANGE,1.81,RJ,BX-151
FLANGE,2.06,RJ,R-24
FLANGE,2.06,RJ,BX-152
FLANGE,3.12,RJ,R-35
Pressure Range:
200-8F 8F 7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,
10,000 PSI,15,000 PSI and 20,000PSI
1,040 Bar and 1,400 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Dial sizes:3.94" (100 mm) dials

Pressure Range:
100-3 RC-100 1,000 PSI,1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI,
10,000 PSI,15,000 PSI and 20,000PSI
1,040 Bar and 1,400 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Dial sizes: 5.91" (150 mm) dials

150-4 RC-150 Accuracy: ± 1.6% of full range
Pressure Range:


1,000 PSI,1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI,
10,000 PSI,15,000 PSI and 20,000PSI
1,040 Bar and 1,400 Bar
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Weight: 11lb (5 kg)
1.2 PRESSURE INDICATING SYSTEM

RIGCHINA’s PRESSURE gauges provide quick, accurate readings of your rigs.
E-17 DIAPHRAGM PROTECTOR 1:1 Piston

Protects measuring or recording device from working fluid while
transmitting no-lag, linear pressure signal.
Rugged workhorse sensor found in every corner of the world doing

every conceivable pressure sensing job.
Robust, time proven design allows easy field repair and maintenance.
Available in flanged, threaded, and weld on female sub

configurations.
Certified models available E-17 Diaphragm Protector.
Standard Capacities include:
3,000, 5,000, 6,000, 10,000, and 15,000 psi, (210, 350, 420, 700, and 1,000 kg/cm 2)
10K, 21K, 42K, 70K, 80K, (21, 35, 42, 70, 100 MPa)
DB1004A 4:1 PRESSURE DEBOOSTER
The Debooster is a stepped piston device which reduces the line

pressure by a ratio of 4:1. System Pressure Gauges and Recorders
are therefore calibrated at ¼ the line pressure. The Debooster
external configurations are based on 2" Buttweld Sub and Wing Nut
Unions.
The Debooster Cylinder replaces the Union Male Sub. The Union
Wing Nut is used; the buttweld Female Sub is optionally available.
A fluid Separator replaces the Union Seal Ring.
Specifications:


Working Pressure: 15,000 PSI / 1,000 Kg/Sq Cm / 100 Mpa
Accuracy: Debooster ±0.5% FSV, system ±2.0% FSV
Pressure Reduction Ratio: 4.07:1
Separator Diaphragm: Viton
Maximum Hose Length: 100 ft/30 M
Recommended Hose: SAE 100R2 Type A or Type B, SAE 100R10 or SAE 100R11
Operating Temperature: -37 to 65ºC (-35 yo 150ºF)
REMOVE PRESSURE INDICATING SYSTEM
Provides quick, accurate check on mud pump operation; helps detect washed out drill pipe or bit
nozzle problems.
Indicator gauges can be mounted in the weight indicator box, driller's console, or locally on the mud
pump
The system consists of a 6 inch Pressure Gauge a Gauge Protector and a high pressure hose.
FEATURES:
Standard capacities include:
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²
Also available in kPA, MPa, and BAR capacities
Durable Gauge Protector mounts with 2-inch NPT sub
Standard 50-foot hose, with other hose lengths available
BENEFITS
Easy to mount in a variety of locations: in a weight-indicator box, in the driller's console, or on the mud
pump.
Full 360° dial calibration accurately indicates small pressure changes.
Fluid-filled gauge protects readings from truck or rig vibration.
Large, easy-to-read 6-inch, fluid-filled dial face.
Operator-adjustable high-pressure damper ensures accurate readings.
TO ORDER SPECIFY

Application
Required capacity
Length of hose from sensor to gauge
Gauge mounting
PRESSURE INDICATING SYSTEM WITH 1:1 PISTON
Single Pointer and Dual-pointer pressure indicator systems deliver accurate

measurements for mud, cementing, acidizing, and fracturing operations
Model GM-6 1:1 PISTON


Dual-pointer pressure indicator systems deliver accurate measurements for

mud, cementing, acidizing, and fracturing operations
Model GM-4 1:1 PISTON
PRESSURE INDICATING SYSTEM with 4:1 Piston
Single Pointer and Dual-pointer pressure indicator systems deliver accurate

measurements for mud, cementing, acidizing, and fracturing operations
Model GM-6A 4:1 PISTON
Dual-pointer pressure indicator systems deliver accurate measurements for

mud, cementing, acidizing, and fracturing operations


1.3 PRESSURE INDICATOR W/SHUT-OFF SWITCH SYSTEMS

GM-7A
GM-7 Single Pointer Pressure Indicator with Shut-off Switch systems deliver accurate measurements
for mud, cementing, acidizing, and fracturing operations.


COMPOUND POINTER PRESSURE GAUGE MODEL GA-110
Provides quick, accurate check on mud pump operation; helps detect washed out drill pipe or bit
nozzle problems
Indicator gauges can be mounted in the weight indicator box, driller's

console, or locally on the mud pump
Full 360° dial calibration for maximum pointer movement; shows the
smallest pressure changes
Fluid filled gauge has large easy to read 6" dial face and high pressure
damper adjust
Typically used with rugged E-17 Diaphragm Protector in Pressure

Indicating Systems
Hose lengths to 50 feet are standard; longer lengths available in some pressure ranges
Panel Mounted
4000, 8000, 12,000 and 16,000 psi
400 and 800 kg/cm2 (40 and 80 MPa)



Part No. Model Description &Technical Parameters Remarks
Diaphragm Protectors and Piston Isolators
Durable Gauge Protector mounts with 2-inch NPT sub

CD-106X E17-152
Available in flanged, threaded, and weld on female sub
configurations.
Pressure Deboosters

DB1004A
CW-DB4X
10,000, 15,000, 20,000 psi
Equivalent values in kg/cm 2 , MPa, BAR
Dual-pointer pressure indicator
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²
GA-113 Also available in kPA, MPa, and BAR capacities

CG-602
Dial sizes: 6" (152.4 mm) dials
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Single Pointer Pressure Gauge
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²

CG-600 GA-112
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)


Dual-pointer pressure indicator system 1:1 Piston
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²
CMG-101 GM-4 Also available in kPA, MPa, and BAR capacities
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Single Pointer Pressure Gauge System 1:1 Piston
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²

CMG-100 GM-6
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Single Pointer Pressure Indicator with Shut-off Switch

systems 1:1 Piston
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²
CMG-104 GM-7 Also available in kPA, MPa, and BAR capacities
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Packing Weight:36 kg
CMG-106 GM-7A Single Pointer Pressure Indicator with Shut-off Switch


systems 4:1 Piston
3,000, 5,000, 6,000, 10,000, and 15,000 psi
210, 350, 420, 700, and 1,000 kg/cm²
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)
Packing Weight: 36 kg
Panel Mounted
252-112 GA-110 Standard Capacities include:
4000, 8000, 12,000 and 16,000 psi
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)


2. DEADLINE ANCHORS & WEIGHT INDICATOR SYSTEMS
2.1 ANCHOR TYPE WEIGHT INDICATORS-INDICATOR SYSTEM
Accurate and reliable indications of hook load and weight on bit are essential to
drillers for the efficient control of ROP and hole direction. The hydraulic
deadline anchor type weight indicator is a standard of the industry, and the
weight indicators set the standards for quality, accuracy, and reliability against
which all others are judged.
RIGCHINA group has weight indicator models designed to work in conjunction

with all industry-standard deadline anchors using either tension or
compression hydraulic load cells. Indicator systems are supplied as either
portable box-mount instrument systems or panel-mounted as part of a driller's
console.


Each system accurately senses tension in the deadline and uses this to indicate
hook load and weight on bit. Many models have separate pointers for both hook
load and weight on bit. In addition, integral circular hydraulic recorders are also
offered on several models.
STANDARD FEATURES
Large, easy-to-read gauge
Unique friction-free diaphragm-type hydraulic load cell withstands the toughest

drilling and environmental conditions
Complete with high pressure hose assembly and disconnect fittings
Needle-type dampers to eliminate hydraulic shock loads and extreme pointer

oscillation during rough drilling or jarring operations
4:1 vernier movement for sensitive bit weight indications

For deadline loads to 168,000 lb (750 kN)
10, 12, 14, and 16 lines strung
E551 compression load cell or E543 Sensater tension load cell

AWE-200 JZ-900
16" indicator
9 MPa
JZ-700 For deadline loads to 130,000 lb (580 kN)

AWE-150


16" dial indicator
7.49 MPa
JZ-500 E551 compression load cell or E543 Sensater tension load cell
AWE-125
16" dial indicator
6.83MPa
JZ-250 E551 compression load cell or E543 Sensater tension load cell
E-100
16" dial indicator
6MPa

D-75 JZ-75
16" dial indicator
5.2MPa
4, 6, and 8 lines strung

FS-60 JZ-60
16" dial indicator
4.2MPa


2.2 DEFLECTION-TYPE (CLIPPER) WEIGHT INDICATOR
Model CDT-1013
For other drilling rig applications, including workover rigs, service rigs and
pulling units that do not have conventional wireline anchors, RIGCHINA offers
several weight indicator solutions. These include Clipper type weight indicators
that have a diaphragm that clamps to the deadline and Summarizer type
weight indicators that have pad type load cells to directly sense mast loads.
Each weight indictor is shipped with 10 dials so moving it from rig to rig is easy
and by simply changing a dial you can switch between drill line size and number
of lines strung. Each Weight Indicator system consists of a Gauge, Deadline
Diaphragm connected by a high-pressure Hose and a C-Clamp to attach the
diaphragm to the drill line. The deadline diaphragm works on a deflection
principle, the tighter the drill line gets the more force is applied to the
diaphragm which converts the deflection to hydraulic pressure and sends that
pressure to the 12”gauge which displays weight. The whole weight indicator
system fits into the steel case for convenient, compact storage. Built-in handles
make the entire system easy to transport.
FEATURES:


12-inch gauge comes standard.
Complete set of 10 dials included from 2-lines 7/8” to 8-Lines 1”
Weight Indicator has two pointers, one for weight and the other for sensitivity
which is a 6:1 ratio and ideal for work such as setting packers and bridge plugs.
Standard model comes in a compact box. Larger box available to with space for
5 6” gauges and one circular recorder.
48,000-pound maximum single-line load with 1” drill line
25-foot heavy duty hose standard. Other lengths available upon request
Circular recorder (optional) can record weight.
Available in English, Metric and SI Metric
BENEFITS
Ready for immediate use out of the crate. Each system is assembled, calibrated
and tested before
Shipping. System is shipped as a sealed unit from the factory with Rigchina All
Weather Instrument Fluid.
Two adjustable dampers, one for weight and one for sensitivity allow the
operator to have full control of the desired sensitivity.
Versatile mounting options allows the weight indicator to be mounted just

about anywhere on the drill floor but the diaphragm and Indicator gauge should
be mounted at roughly the same height.
TO ORDER SPECIFY:
Size of rig
Dial reading required, English, Metric (kg) or SI Metric (daN)
Size of drilling wireline
Derrick capacity in pounds
Number of lines strung
Hose length


2.3 WIRELINE WEIGHT INDICATORS
Wireline Weight Indicators Ideally suited for used by wireline service

trucks.
Model CW-50 Wireline Weight Indicators
Model CW-20 Wireline Weight Indicators
FEATURES:
-6” or 8.5” fluid filled gauge with dial faces available in decanewtons, pounds, kilograms, or dual scale.
-Damper system allows operator to increase or decrease sentivity easily to monitor the minutest changes.


-Each system is calibrated in our factory and is shipped precharged and ready to use.
-Calibration and line pull certificates are sent with the system.
-Available in the following capacities: 1000, 2000, 3000, 4000, 5000, 6000, and 10,000 pounds.
2.4 DEADLINE ANCHORS
Deadline anchors provide accurate weight measurements and secure

deadlines
Full line of all-weather, quality-built deadline anchors pull capacities

from 30,000 to 160,000 pounds
Constructed with top-quality steel and proof-tested to 150% of rated capacity,

Deadline Anchors are highly accurate, super-strong anchors of exceptional
reliability.
RIGCHINA Deadline Anchors are designed to be used with hydraulic RIGCHINA

Load Cells to provide sensitive weight signals for transmission to RIGCHINA
Weight Indicators. These anchors also provide a reliable way to secure
deadlines, while allowing for fast and easy line-slipping.
FEATURES:
 Models available to handle wireline sizes from 5/8 inches to 1-7/8 inches.
 Deadlines pull capacities from 30,000 to 160,000 pounds.


 Models available in a variety of sizes — from lightweight models for

mounting on wheel- mounted rigs and on helicopter rigs — to models
designed for 2-million-pound drilling masts.
TO ORDER SPECIFY:
 Size of rig
 Derrick capacity in pounds
 Size of drilling wireline
 Number of lines strung
 Right or left hand model
JZG-41 JZG72


Main technical specification for deadline anchor (Weight Indicator)

Max
Specification Mounting
Model of deadline Load
of Type Deadline Max load
weight pulling Sensor Drilling Rig
deadline Welding(W) numbers (pounds)
indicator force （Mpa）
anchor Casting(C)
(pounds)
161862 14 2266068
JZG72 12000 m
(720 Kn) 12 1942344
161862 14 2266068
JZ900 JZG72(AO1) Leg (W) 9 9000 m
(720 Kn) 12 1942344
161862 14 2266068 E551
JZG72(AO2)
(720 Kn) 12 1942344 Sensor
161862 14 2266068
JZ900A JZG72A Floor (W) 9
(720 Kn) 12 1942344
134885 14 1888390
JZ700 JZG60 Floor (W) 9
(600 Kn) 12 1618620
125893 14 1762502
JZ700A JZG56 Leg (W) 7.49
(560 Kn) 12 1510716
103412 14 1447768 Left hand
JZ600 JZG46 Leg (W) 6.83
(460Kn) 12 1240944 model
Leg 103412 14 1447768 E551Sensor,
JZ600A JZG46A 6.83
Welding(W) (460Kn) 12 1240944 Left hand
103412 14 1447768
JZ600B JZG46B Leg (W) 6.83 Right Hand
(460Kn) 12 1240944
94420 12 1133040
JZ500 JZG42 Floor(C) 6
(420Kn) 10 944200
92172 12 1106064
JZ500A JZG41 Leg (C) 6.83
(410Kn) 10 921720
94420 12 1133040 Left hand

JZ500D JZG42A Leg (C) 6.83
(420Kn) 10 944200
12 944196
78683
JZ400 JZG35 Floor(C) 10 786830 6
(350Kn)
8* 629464
76435 12 917220
JZ400B JZG34A Leg (C)） 6
(340Kn) 10 764350
76435 12 917220
JZ400C JZG34B Leg (W) 6
(340Kn) 10 764350
76435 12 917220
JZ400D JZG34C Leg (W) 6 E543Sensor
(340Kn) 10 764350
78683 12 944196
JZ400E JZG35A Floor(W) 6 Crown block
(350Kn) 10 786830


8 629464
67443 12 809316
JZ300 JZG30 Leg (C) 6
(300Kn) 10 674430
67443 12 809316 E551Sensor
JZ300A JZG30A Leg (W) 5.2
(300Kn) 10 674430
12* 647448
53954
JZ250 JZG24 Floor(C) 10 539540 6
(240Kn)
8 431632
10 449620
44962
JZ200 JZG20 Floor(C) 8 359696 6
(200Kn)
6* 269772
10 404660
40466
JZ150A JZG18A Floor(C) 8 323728 6
(180Kn)
6 242796
10* 404660
40466
JZ150 JZG18 Leg (C) 8 323728 6
(180Kn)
6 242796
10* 337210
33721
JZ100 JZG15 Leg (C) 8 269768 6
(150Kn)
6 202326
10* 337210
33721
JZ100A JZG15A Floor(C) 8 269768
(150Kn)
6 202326
8 337210
33721
JZ60 JZG10 Pull line 6 269768 4.2
(150Kn)
4* 202326
22481 6 134886
JZ40 JZG10A Leg 6
(100Kn) 4 89924
30709
JZ82 JZG13 Pull line 6 184254 6
(136.6Kn)
28101
JZ75 JZG12 Pull line 6 168606 5.2
(125Kn)


3. PUMP STROKE COUNTER/RATE METER MODEL PSC-3
Monitors and displays number of strokes and stroke rate for two mud pumps
The Pump Stroke Counter/Rate Meter displays both the total number of strokes and the strokes
per minute for 3 mud pumps up to 1,024 strokes per minute for each pump. Push buttons
conveniently located on the front of the instrument make it easy for the operator to reset each
pump count. A stainless steel enclosure ensures reliable readings even in the toughest operating
environments.
FEATURES
 Displays total number of strokes — from 0 to 9,999

 Displays number of strokes per minute — from 7.5 to 1,024
 Low current consumption — approximately 100 uA in standby mode
 LCD display height: 0.7 inch


 Operates in temperatures from -4° to 140° F (–20° to 60° C)

 Available model that meets Class 1, Division 1 standards
 Displays strokes for 3 mud pumps
1. Model PSC-3 pump stroke counter

2. Cable in the hydraulic control console（1.5m）
3. Connection end for pump stroke counter
4. Main cable（50m）
5. Explosion-proof pull box
6. Branch cable（25m）
7. Sensing probe for pump stroke counter
8. Sensing switch for pump stroke counter.
9. Installation plate
10. Fixed clip
BENEFITS:
 Battery powered — no external power required.

 Low energy use adds the extra benefit of an intrinsically safe design.
 Stainless steel enclosure ensures accurate readings in harsh environments.
 Easy-to-read display and easy-to-use control buttons.
 Low maintenance, with a long life expectancy of 50,000 hours of continuous use.
 Requires no calibration.


4. MODEL CMM100 MECHANICAL SANDLINE DEPTHOMETER
Easy to use and maintain, gives operators accurate

readings of sandline depth. Hand held Sandline
Depthometer's help operators avoid situations that
can cause damage to their sandline and possible
safety issues with sandline. Mechanical
Depthometers can be used on workover rigs, casing
set rigs and mining coring rigs. Each Depthometer
comes in either Metric or English readings. An
optional floor mount bracket is available.
 Sand line (9/16" wire rope)

 Counter
 Completer Mechanical Counter
 Cavins or Equivalent
FEATURES:
 Light weight
 Accurate readings even over thousands of Meters
 Ease of use makes this system ideal for all work over applications
 Low maintenance for years of service
BENEFITS:
 Increases safety and optimizes efficiency by providing warnings about possible
sandline out of hole situations
 Low Cost alternative
 Years of proven reliability.
TO ORDER SPECIFY:
 Metric or English
 Carrying case required; Yes or No
 Floor bracket required; Yes or No


5. MECHANICAL DYNAMOMETER MODEL GLG-02
The Dynamometer has proven to have limitless versatility as a tension, traction and weight
measuring instrument. It has been used for such diverse jobs as mounting cables for bridges;
adjusting tension on guy wires; field testing chain, rope, wire—anything requiring precision force
or tension measurement.
Utility companies count on the Model GLG-02 Dynamometer. Communication tower erectors
employ several dynamometers during installation to properly tension guy wires.
The Dynamometer is also working every day for the aviation industry and is used worldwide in
military installations.

Dial sizes: 10" (250 mm) dials

Wide range of capacities:5,10,30, 50,80, 100, 120 ,160Kn
Zero control
Maximum Overload: 125% of Rated Capacity
Flexing beam fabricated from high specification steel. Heat treated
201-02 GLG-02 for maximum strength.
Generous shackle openings mate with most hooks and hardware.
Anti-parallax dial and pointer offers accurate readings from
varying sightlines. Dial is mar and fog resistant.
Operating Temperature : 40℉ to 125℉ (4.4℃ to 52℃)
Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm)


6. TONG TORQUE AND TONG LINE PULL INDICATION SYSTEMS
The Tong Line Pull and Tong Torque Systems are designed to give accurate readings for
makeup and breakout torque to reduce drill collar and tool joint failure.
The systems indicate the torque applied to drill pipe, drill collars, tubing, and casing while joints
are made. This is important for reducing drill collar and tool joint failure resulting from improper
make-up. Each tong system consists of a hydraulic load cell, shackles (on tension type models),
hose assembly, 6" liquid filled gauge with damper assembly,
Bracket to mount gauge (except on panel mount versions), and recharge kit consisting of hand
pump, and (1) qt. of instrument fluid. Both types of Tong Systems are available in English, Metric,
or dual scale capacities up to 30,000 pounds straight line pull. There are two types of systems
available:
6.1 UNIVERSAL TONG LINE PULL SERIES:

Indicates make-up or break-out torque in pounds of line pull for tool joints, drill collars, and drill
string components. This is useful in applications where the user wants to use the system with
different length tong handles. To obtain the foot pounds equal to the pounds reading on the
indicator the operator simply multiplies the pounds reading of the indicator by the tong handle
length (in feet) that he is using, and this will give him the foot pounds equivalent.
6.2 TONG TORQUE (JOINT TORQUE) SERIES:

Indicates torque in foot pounds applied to each joint when using power tongs to run pipe or casing.
These systems are available for specific makes and models of power tongs and come with either
compression or tension type load cells.


FEATURES:
• Adjustable target pointer can be set to the desired capacity so the driller can work to a clear
mark
• Models and capacities available to work with wide range of manual and power tongs
• Available in wide range of capacities and in English, Metric, or dual scale capacities
• Models available for temporary or permanent installation
• Load cells available in either tension or compression type
• Durable, rugged design
BENEFITS:
• Rugged design ensures years of reliable service and minimum maintenance
• Gauge target pointer can be set to the required torque to give driller a clear target mark
• Fluid filled design of gauge reduces the need for repairs and protects your equipment
investment
• Provides accurate torque indications, reducing drill collar and tool joint failure
• Multiple design configurations allows user to use every time collars are run, or only for spot
checks
TO ORDER SPECIFY:
• Capacity and scale needed (English or Metric)
• Handle length or tong to be used with (Tong Torque Systems only)
• Panel or box mount indicator
• Tension or compression type load cell (Tong Torque Systems only)
• Hose length needed (if different than standard)


7. MECHANICAL ROTARY TORQUE SYSTEM
Delivers reliable torque measurements for rigs that use chain-driven rotary tables
Available in box-mount or panel-mount configurations, the RIGCHINA Hydraulic
Rotary Torque System provides accurate indications of changes in torque for rigs that
use chain-driven rotary tables.
Each system includes an Idler assembly and a Gauge.

Torque sensor measures torque variation of the drilling tool driven by the rotary table
with rotary table torque sensor of tension pulley type, so as to show the operating
condition of the downhole drilling tool and changes in the bottom hole stratum, which
is helpful to know the downhole condition and avoid accident.
TECHNICAL SPECIFICATION:
1. Output hydraulic pressure signal range: 0~6MPa
2. Tension pulley external diameter: F305mm
3. High-pressure cylinder diameter: F65mm
4. Minimum height of sensor: 355.5mm
5. Operating temperature: -40. ~+85 ºC
6. Non-linear error: 0.5%
FEATURES:
6-inch fluid-filled Gauge
Available in 500 and 1,000 points
Gauge has operator-adjustable dial to zero out drill string
in order to monitor torque at the bit
Standard 25-foot hose, with other hose lengths available
Rugged Steel Sprocket available (replaces rubber wheel located in Idler assembly)

8. WARRANTY AND RETURNS
8.1 WARRANTY
Rigchina Group Company warrants its products to be free from defects in material
and workmanship for a period of 24 months from the time of shipment. If repair
or adjustment is necessary, and has not been the result of abuse or misuse within
the twelve-month period, please return, freight prepaid, and correction of the
defect will be made without charge.
Out of warranty products will be repaired for a nominal charge.
Please refer to the accompanying warranty statement enclosed with the product.
8.2 RETURNS
For your protection, items being returned must be carefully packed to prevent
damage in shipment and insured against possible damage or loss. Rigchina will not
be responsible for damage resulting from careless or insufficient packing.
Before returning items for any reason, authorization must be obtained from
Rigchina Instrument Company. When applying for authorization, please include
information regarding the reason the items are to be returned.
Our shipping address is:
RIGCHINA GROUP COMPANY

Location:: No.80-82, Qiude Road, West Cheng Industrial Estate,
Yongkang city, Zhejiang Province,
China, Postcode: 321300
Telephone: 0086-579-87537698
Fax: 0086-579-8753 696
Online
For sales information: sales@rigchina.com
Skype: rigchina
Website: http://www.rigchina.com
For After-Sales Servicel: service@rigchina.com
…Quality is Everything...

Oilfield Instruments Catalogue

Uploaded by

Copyright:

Available Formats

Oilfield Instruments Catalogue

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Oilfield Instruments Catalogue

Uploaded by

Copyright:

Available Formats

OILFIELD INSTRUMENTS

PRODUCT CATALOG 2016

© Copyright 1996-2016 Rigchina Group Company All rights reserved.

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

2. Deadline Anchors & Weight Indicator Systems ............ 20

3. Pump Stroke Counter/Rate Meter Model PSC-3 ........... 30

4. Model CMM100 Mechanical Sandline Depthometer....... 32

5. Mechanical Dynamometer Model GLG-02 ..................... 33

7. Mechanical Rotary Torque System ............................... 36

8. Warranty and Returns.................................................. 37

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

1. PRESSURE INDICATING SYSTEM

1.1 MUD PUMP PRESSURE GAUGES

Interchangeable with Cameron type gauges

Temerature range -20 to 250(-29 to 121)

Sub end connections made from steel,stainless steel or bronze.

Dial ranges in PSI,BAR,KGC and KPA.

Model 8 gauges offer dual unit of measure.

Cases made with aluminum .

Sour gas and charpy available.

Flanged subs can have inconel or stainless steel inlays

Hummer Union end and Flange connections.

Xylan coated high pressure adapters

Pressure plug on backside for safely.

TYPE F PRESSURE GAUGE (MODEL 6)

STANDPIPE UNION FLANGE

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

Temperature range: -50°F to 180°F

Heavy duty seals create watertight barrier around gauge mechanism

TYPE D PRESSURE GAUGE (MODEL 7)

1,000 p.s.i., 3,000 p.s.i. 5,000 p.s.i and 6,000 p.s.i.

70 Bar, 210 Bar 350 and 420 Bar

* 2" Nutted version available

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

Diameter: 7-5/8"(194 mm), Height: 14-3/16"(360 mm)

Temperature range: -50°F to 180°F

Heavy duty seals create watertight barrier around gauge mechanism

Impact resistant, clear polymer lens

Connects with threaded female 2" line pipe

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

TYPE E PRESSURE GAUGE (MODEL 8)

Heavy duty seals create watertight barrier around gauge mechanism

Impact resistant, clear polymer lens

Dial sizes: 8-1/8" (206 mm) dials

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,100MPa,120MPa and 160MPa

TYPE RC-100 PRESSURE GAUGE

7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,100MPa,120MPa and 160MPa

Heavy duty seals create watertight barrier around gauge mechanism

Impact resistant, clear polymer lens

TYPE RC-150 PRESSURE GAUGE

STANDPIPE UNION FLANGE

7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,100MPa,120MPa and 160MPa

Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015

Temperature range: -50°F to 180°F

Heavy duty seals create watertight barrier around gauge mechanism

Impact resistant, clear polymer lens

Main Technical Specification

Dial sizes: 4-7/8" (123 mm) dials