Bach Brandenburg Set Work Support Guide
Bach Brandenburg Set Work Support Guide
Bach Brandenburg Set Work Support Guide
The continuo consisted of one or more bass instruments, such as the cello and double bass,
together with at least one chordal instrument such as a harpsichord. The keyboard player
would realise the harmony in the right hand. A figured bass (a shorthand system of numbers
under the bass notes) guided the player as to what type of chord to play.
In the Brandenburg Concertos, Bach broke with tradition in a number of ways. In the fifth
concerto, for instance:
There is an extended virtuoso (difficult display) solo part for harpsichord. This is regarded
as the first concerto for keyboard solo in musical history. Much of the most difficult solo
music is found in the rapid scalic runs in both right and left hands. There are also
passages where both hands play trills at the same time. The first movement even has an
extended cadenza (unaccompanied solo section). Bach probably played the harpsichord
part himself.
Only occasionally does the harpsichord play continuo chords (e.g. bars 29–37). In these
passages there is figured bass.
The ripieno (string orchestra) only has one violin part (normally there would be two).
The concertino (solo group) consists of the combination of flute, violin and harpsichord.
The Baroque flute was very different from today’s instrument. It was made of wood, had finger
holes and just one metal key.
Technically the piece is a concerto grosso (a concerto for a large number of instrumental
parts). Even so, it is likely that at the original performances there would only have been one
player to a part.
It is important to note that the mechanical action of the harpsichord prevented variations in
dynamics, unless a double manual harpsichord happened to be available. The evidence
suggests that a single manual harpsichord would have been used for this piece. Accordingly,
there are no dynamic markings for the harpsichord in the original score.
On the few occasions where there are dynamic markings for any instrument, they are there
largely for balance reasons (to ensure a particular musical line can be heard). So the solo violin
part is marked piano at the beginning of the middle section, so that it does not drown the sound
of the tune on the quieter solo flute.
Structure
The structure of this movement is very different from the standard ritornello form found in the
concertos of composers such as Vivaldi.
The movement is a large ternary structure (ABA). Very like the first movement, this third
movement could be thought of as Ritornello form, although the return to original A section
material is never entirely conclusive, within the middle section. This introduction of motifs from
other sections was a common and clever technique often used by J S Bach.
A (bars 1– The A section in D major begins in fugal style (see notes on
78) texture)
There are brief sections in the dominant key (A major)
B (bars 79– The middle section begins at bar 79 in the relative minor key
232) (B minor), with a new theme (in the flute), which has many
similarities to the main one
The second theme returns in bar 148, this time in the dominant
(A major) in the ripieno
Fragments of the theme from the A section make frequent
appearances
The section ends with a perfect cadence in B minor
A (bars 233– A repeat of the opening A section, beginning with an extra D major
end) chord in the continuo to establish the return to the tonic key.
Texture
The texture is polyphonic/contrapuntal (i.e. contains several independent melodic strands
sounding together).
The movement begins in fugal style. A fugue is a complicated piece which uses imitation
almost throughout. This piece is not an actual fugue, but uses fugal characteristics (the
opening four bars are a good example).
The subject (main theme first statement) in the solo violin is followed by an answer in the
flute at a distance of two bars. We now have two-part imitation.
There are then four additional bars before the harpsichord left hand enters with the subject,
which is then answered two bars later by the right hand.
The harpsichord plays in two-part counterpoint.
Once both hands are playing, the music is in four-part counterpoint.
Occasionally the flute and violin play in thirds. The harpsichord also does this.
When the ripieno is playing, the flute and violin sometimes double each other in unison (e.g.
bar 33).
The bass line for the new middle section theme has a tonic pedal on B.
Melody
Much of the music is in conjunct (stepwise) style (e.g. bar 2), though there are leaps (e.g.
fourths in bar 1).
Often the conjunct music is extended to scalic runs, especially in the harpsichord part.
There is a rising sequence at bar 137 (same short phrase repeated several times, going up
one note each time).
There are occasional ornaments, with trills (e.g. bar 19) in the harpsichord part.
There are appoggiaturas in the main middle section theme when it returns in A major (e.g.
bar 148).
Tonality
Harmony
The harmony uses the standard chords of the time (i.e. predominantly chords I, IV and V,
with occasional use of II and VI), including dominant sevenths in various inversions.
The harmony is functional.
The harmony uses mainly root position and first inversion chords.
Perfect cadences announce the ends of sections.
Suspensions are used occasionally (i.e. 9–8 suspension at bar 130).
The metre is 2/4 – two beats to the bar – but the music could also be notated in 6/8
compound time. It is essentially a Baroque gigue (a dance in compound duple time).
It uses triplets and dotted rhythm throughout.
The dotted quaver-semiquaver grouping (as in the first bar) would have been performed in
triplet rhythm – so the dotted quaver would be two-thirds of a beat, and the semiquaver
would be one-third of a beat.
The harpsichord part in particular has many semiquaver runs.