Republic of the Philippines

Department of Education
REGION III-CENTRAL LUZON
SCHOOLS DIVISION OF TARLAC PROVINCE
PADAPADA NATIONAL HIGH SCHOOL
Santa IGNACIA SOUTH DISTRICT
Santa Ignacia, Tarlac
4th Quarter Summative Test in TLE/ICT-Computer Systems Servicing 9
S.Y.2021-2022
Name:____________________________________ Section:_______________ Date:____________ Score:______

Directions: Choose the letter of the correct answer. ENCIRCLE the letter of your answer.

1. A set of transistors that is the controller or ‘brain’ of an electronic circuit

a. capacitor b. integrated circuit c. diode d. resistor
2. A semiconductor device used to amplify and switch electronic signals and electrical power.
a. transistor b. capacitor c. printed circuit board d. cathode
3. It neutralizes static charges in the air, providing a workspace with extra ESD protection.
a. ESD clothing b. ionizer c. anti – static wrist strap d. multi-meter
4. Defined in terms of resistance and watts
a. alternating current (AC) b. electricity c. electronics d. direct current (DC)
5. A complete and closed path through which electric current can flow.
a. circuit board b. integrated circuit c. printed circuit board d. circuit
6. It is basically a special type of diode that lights up when electricity passes through it.
a. switch b. battery c. light emitting diode d. breadboard
7. A measuring instrument which measures the voltage across any two points of an electric circuit.
a. DC voltmeter b. AC voltmeter c. ammeter d. voltmeter
8. This is a type of diode used in microwave applications.
a. photodiode b. tunnel diode c. varactor diode d. zener diode
9. It is a storage device that uses removable 3.5- inch disks
a. Platform Testing b. Debugging c. Inspecting d. Prototyping
10. A combination of hardware and software integrated on a chip.
a. antivirus b. BIOS c. firmware d. POST
11. Validates that your product functions acceptably for the market in which you are releasing your product.
a. Efficiency b. Validity c. Performance d. Effectiveness
12. It performed to provide an independent analysis of a product in terms of how easy or difficult it is to use.
a. Computerization b. Automation c. Usability d. Inspecting equipment
13. A good field technician is able to foresee the outcomes and effects of various IT strategies.
a. Validity b. Functionality c. Automation d. Consulting and advising others
14. It describes the product’s capabilities and limitations.
a. Efficiency b. Performance c. Effectiveness d. Acceptability
15. These are used for picking small parts in the computer unit.
a. Soldering Iron b. Pliers and Tweezers c. Thermal Paste d. Screw Drivers
16. A technician is troubleshooting a computer that has lost connectivity to the network. After data is gathered from the
customer, which two tasks should the technician complete next?
a. Verify that the customer has a valid IP address?
b. Verify that the compute has the most-up-to date version of OS’
c. Try to log in as a different user
d. Check that the NIC link light is lit
17. A device used for testing the network connection.
a. Crimping tool b. Cable Tester c. Punch down tool d. Loopback Tester
18. An accumulation of electric charge on an insulated body.
a. Direct Current b. Static Electricity c. Alternating Current d. Electric Charge
19. You can delete unwanted programs and files from your computer and this will be helpful in increasing the speed
a. Defragmenter b. System File Checker c. Disk Clean up d. Disk Management Tool
20. These are usually resolved by updating the program to its latest version.
a. System error b. Application errors c. Browser status errors d. Post Code errors
21. This refers to making sure your product functions correctly with other products in the “real world” when released.
a. Automation c. Functionality b. Compatibility d. Usability
22. Pertains to keeping the staff members up-to-date on new developments in the IT field.
a. Interacting with computers b. Performance c. Coaching d. Training and teaching others
23. It describes the product’s capabilities and limitations.
a. Competitive Analysis b. Automation c. Functionality d. Communication
24. It pertains to sharing information and solving the problems that arise in their everyday life.
a. Communication b. Functionality c. Automation d. Compatibility
25. Allows you to perform repetitive testing quickly and easily by scripting your product with one of many different industry
tools.
a. Consulting and advising others b. Automation c. Training and teaching others d. Usability
26. Refers to the ability to manage, organize, or run something on a computer
a. Controls b. Effectiveness c. Bug Detection d. functionality
27. Prior to assembling a computer, what should you wear to protect computer parts from ESD?
a. PPW b. Gloves c. Working Clothes d. PPE
28. What should you do if suddenly there is a lightning storm that occurs while assembling a computer?
a. Unplug the power source b. Keep on assembling c. Wear your PPE d. Close the windows

Address: Modomo Subd., Purok Rang-Ay, Padapada, Santa Ignacia, Tarlac

Telephone No.: (045) 925-4749
Email Address: 300978@deped.gov.ph
29. Any basic discrete device or physical entity in an electronic system used to affect electrons or their associated fields.
a. Electricity b. Electric Device c. Electronic Components d. Computer
30. PCB stands for
a. Personal Computer Board b. Performance Circulatory Board c. Printed Circuit Board d. Printed Computer Board
31. Rely on a source of energy and usually can inject power into a circuit
a. Active Components b. Branded Components c. Passive Components d. Default Components
32. As a consequence they can't amplify (increase the power of a signal)
a. Active Components b. Branded Components c. Passive Components d. Default Components
33. Semiconductor device used to amplify and switch electronic signals and electrical power.
a. Capacitor b. Resistor c. Transistor d. Diode
34. Its function is to store the electrical energy and give this energy again to the circuit when necessary.
a. Integrated Circuit b. Resistor c. Capacitor d. Diode
35. Allows an electric current to pass in one direction, while blocking current in the opposite direction.
a. Integrated Circuit b. Resistor c. Capacitor d. Diode
35. Restoration of a broken, damaged, or failed device, equipment, part, or property to an acceptable operating or usable
condition or state
a.Cleaning b.Lubricating c.Tightening d.Tools repairs e.Sharpening
36.To apply some oily or greasy substance to (a machine, parts of a mechanism, etc.) in order to diminish friction
a.Cleaning b.Lubricating c.Tightening d.Tools repairs e.Sharpening
37.The process of removing unwanted substances, such as dirt, infectious agents, and other impurities, from an object or
environment.
a.Cleaning b.Lubricating c.Tightening d.Tools repairs e.Sharpening
38.To make something more fixed in place, more constricted, or more snug.
a.Cleaning b.Lubricating c.Tightening d.Tools repairs e.Sharpening
39. The act of making the edge of something very thin or of making its end pointed.
a.Cleaning b.Lubricating c.Tightening d.Tools repairs e.Sharpening
40. Which of the following is NOT a metadata?
a. Survey b. Date c. Tester’s Details d. Identification of Code
41. This status indicates that a defect that poses (or could pose) a risk of injury to persons has been identified and that it
must be reported to the enforcing authority.
a. OK b. AE c. BD d.AN e.NL
42. This status indicates that a defect that poses (or could pose) a risk of injury to persons has been identified but that it
does not require reporting to the enforcing authority.
a. OK b. AE c. BD d.AN e.NL
43. Indicates that an Engineer Surveyor has not been able inspect the item because the customer has not presented it for
examination and the engineer surveyor has been unable to locate or identify it.
a. OK b. AE c. BD d.AN e.NL
44. Indicates that an inspection took place and no defects were detected. However, the customer should view the reports
for observations as these may provide useful information.
a. OK b. AE c. BD d.AN e.NL
45. This status indicates that a defect has been identified but that, in the engineer surveyor's judgment, it does not pose a
specific risk of injury to persons as defined in the respective regulations to which the item has been inspected.
a. OK b. AE c. BD d.AN e.NL
46. The separation of a molding compound from either the die or the lead frame of an integrated circuit.
a.Wire bond Breaking b. Delamination c.Solder Overstress d.Board Level Failures e.Lead Fracture
47. A failure mechanism that occurs when the solder joint of a component remains intact, but the metal lead itself breaks
between the board and the body of a component.
a.Wire bond Breaking b. Delamination c.Solder Overstress d.Board Level Failures e.Lead Fracture
48. The ball bond breaks at the intermetallic connection between wire and the die, and lifts off the bond pad.
a.Wire bond Breaking b. Delamination c.Solder Overstress d.Board Level Failures e.Lead Fracture
49. Manifest on or within the printed circuit board itself.
a.Wire bond Breaking b. Delamination c.Solder Overstress d.Board Level Failures e.Lead Fracture
50. Occurs when a single mechanical event, such as a drop, results in a fractured solder joint.
a.Wire bond Breaking b. Delamination c.Solder Overstress d.Board Level Failures e.Lead Fracture

Congratulations!
God Bless and Keep Safe!

Prepared by:

ALEX R. CAINOY JR.

TLE Teacher I

Checked by: Noted:

DAISY G. DUPITAS WILMA B. DOMINGO

Head Teacher I Principal II

Address: Modomo Subd., Purok Rang-Ay, Padapada, Santa Ignacia, Tarlac

Telephone No.: (045) 925-4749
Email Address: 300978@deped.gov.ph