1 2 3 4 5 6 7 8 9 10 11 12

A A
Motor plate for shaft Cylinder - funnel
Screwed from the outer Plate for shaft
side of the two support 500±0.5
Placed inside and welded 223±0.1
parts welded together
on the side where motor is around the edges

0.5
0±
32
ø16 THRU
372±0.2

240±0.2

100±0.2
.2
B Ø40±0 B

50±0.5
219±0.5
50±0.2

The entire screw conveyor is manufactured with anti-corrosion coatings.

Alongside with both end plates. Finished with RAL 9003 Signal white paint.

50±0.2 ø16 THRU x10

100±0.2 50±0.2

372±0.5
C C
Pulley / V-belt Support
Screw sub-assembly
The coils are welded on to the small cylinder

Diameter is the same as of the big

cylinder so that it fits perfectly additionally for better strength
2715 support is welded on to the cylinder

432.28

300±0.1
D D

186
Ø2
69±
0 .2

1954

6 682
Shaft with keyway and retaining ring R1

No need for retaining ring since

E E
the when connected left plate pushes the The universal support part is also used to mount
screw to the right
Screw conveyor the guard and motor from the front side;
the only difference is that no flanges are
welded and the necessary holes must be drilled.

The large cylinder is

anchored by a support that is screwed into the concrete
12
so that the conveyor won't move while it is in use.
A 300 inner diameter ring with 8 holes
connects the already owned rectangular 8 13
A funnel through which it enters. 23 1 Support Steel, Mild Part 7
F Motor is mounted on top of the cylinder 22 1 Small support Steel, Mild Part 8 F
by the plate which is welded on to a support 21 1 Funnel Steel, Mild Part 11
20 28 Prevailing torque type all-metal Steel, Mild Nut GB/T 6184 M16
hexagon nuts, style 1
Motor cover which preventing injury 7
19 Hex-Head Bolt Steel, Mild DIN 7990 - M16 x 40
as well as protecting the 18 1 Hex-Head Bolt Steel, Mild DIN 7990 - M16 x 45
bearings , belts and pulley system 25 1 Right end Steel, Mild Part 04
26 1 Left end Steel, Mild Part 03

3 22 16 10 Hex-Head Bolt Steel, Mild DIN 7990 - M16 x 70

A-A ( 1 : 8 )
7 14 1 Guarding Steel, Mild Part 14
1 20
2 13 1 Pulley Steel Grooved Pulley2
12 3 V-Belt Rubber belt
9 13 1 Pulley Steel Grooved Pulley1
10 1 Key Steel,Cast Part 12
G G
472

10 9 2 STEP AP214 SKF UCF 308

4 8 1 3D InterOp IGES (v. 2017 1.0.0), Steel, Cast Motor
Spatial Corp. Copyright (c)
6 1999-2016.
19 7 1 Mator - plate Steel, Mild Part 13
14 6 1 Plate - left Steel, Mild Part 03
5 1 Holder Steel, Mild Support 7
4 2 Holder assembly Assembly 02
A 3 1 Screw Assembly 01
2 1 Plate - right Steel, Mild Part 04
2673 1 1 Big Cylinder Steel, Cast Part 01
POS QTY DESCRIPTION MATERIAL / SUPPLIER DRAWING NO / TYPE
Dato Created by Approved by Scale

1:x
H 27.11.2022 Kovac/Radak H

VIA
UNIVERSITY COLLEGE
Layout 1

1 2 3 4 5 6 7 8 9 10 11 12