Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    Bronze: LG2 - Leaded Gunmetal

    Uploaded by

    Dodi Suhendra
    This document provides information on three types of bronze alloys produced by voestalpine High Performance Metals (Australia) Pty Ltd: LG2 leaded gunmetal, PB1 phosphorus bronze, and 954 aluminium bronze. It lists the typical chemical composition, properties, applications, size ranges, and specifications for each alloy.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bronze: LG2 - Leaded Gunmetal

    Uploaded by

    Dodi Suhendra
    76 views3 pages
    This document provides information on three types of bronze alloys produced by voestalpine High Performance Metals (Australia) Pty Ltd: LG2 leaded gunmetal, PB1 phosphorus bronze, and 954 aluminium bronze. It lists the typical chemical composition, properties, applications, size ranges, and specifications for each alloy.

    Original Description:

    mat

    Original Title

    Bro

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on three types of bronze alloys produced by voestalpine High Performance Metals (Australia) Pty Ltd: LG2 leaded gunmetal, PB1 phosphorus bronze, and 954 aluminium bronze. It lists the typical chemical composition, properties, applications, size ranges, and specifications for each alloy.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    76 views3 pages

    Bronze: LG2 - Leaded Gunmetal

    Uploaded by

    Dodi Suhendra
    This document provides information on three types of bronze alloys produced by voestalpine High Performance Metals (Australia) Pty Ltd: LG2 leaded gunmetal, PB1 phosphorus bronze, and 954 aluminium bronze. It lists the typical chemical composition, properties, applications, size ranges, and specifications for each alloy.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    voestalpine High Performance Metals (Australia) Pty Ltd

    BRONZE
    LG2 – Leaded Gunmetal
    Cu Pb Sn Zn P Ni Al Fe
    Typical Analysis
    (Ave. values %) 85.0 5.0 5.0 5.0 0.025 1.0 0.002 0.30

    NEAREST AS BS ASTM SAE


    STANDARD 83600 LG2 83600 40

    LG2 has Excellent machining properties. Medium strength, good pressure toughness
    DESCRIPTION and is not subject to dezincification and has reasonable corrosion resistance to sea
    water and brine, making it suitable for pump and valve components.

    LG2 is suitable for bearings having light loads and low to medium speeds with
    adequate lubrication and for very light duty gears when loading is negligible.

    APPLICATIONS Pressure tight requirements, Valve bodies, Pump bodies

    Tensile Yield Strength Hardness


    Manufacturing Elongation
    MECHANICAL Strength 0.2% range
    Process %
    PROPERTIES MPa MPa HB
    Continuous
    270 100 13 75
    Cast
    Centrifugal
    220 110 8 80
    Cast

    Specific Gravity 8.8


    GENERAL
    PROPERTIES Compressive strength
    100 MPa
    0.1% Permanent set
    Machinability rating
    84
    Free machining brass = 100
    O
    Operating temperature, max 230 C
    O
    Stress relieve 260 C
    voestalpine High Performance Metals (Australia) Pty Ltd

    Round 12.7 to 304.8 mm


    SIZE RANGE
    Hollow 25.4 OD x 19.05 ID to 330.2 OD x 279.4 ID

    PB1 – Phosphorus Bronze


    Cu Pb Sn Ni Zn Sb P Al
    Typical Analysis
    (Ave. values %) 88.0 0.25 11.0 0.10 0.05 0.20 1.00 0.005

    NEAREST AS BS SAE ASTM


    STANDARD 90710 PB1 65 C90700

    PB1 has good machining properties, high strength and good corrosion resistance to
    DESCRIPTION
    sea water and brine, making it suitable for pump and valve components.

    PB1 is suitable for heavy load gears, worm wheels and bearings having medium to
    high loads and speeds with good resistance to impact loading or pounding. PB1 must
    have good lubrication and alignment.

    APPLICATIONS Gears, Bearings, Heavy load bushes.

    Tensile Yield Strength Hardness


    Manufacturing Elongation
    MECHANICAL Strength 0.2% range
    Process %
    PROPERTIES MPa MPa HB
    Continuous
    360 170 8 80
    Cast
    Centrifugal
    340 170 7 80
    Cast

    Specific Gravity 8.80


    GENERAL
    PROPERTIES Machinability rating
    30
    Free machining brass = 100
    O
    Operating temperature, max 250 C
    O
    Stress relieve 260 C

    Round 19.05 to 152.4 mm


    SIZE RANGE
    Hollow 38.1 OD x 19.05 ID to 165.1 OD x 50.8 ID
    voestalpine High Performance Metals (Australia) Pty Ltd

    954 – Aluminium Bronze


    Cu Fe Ni Mn Al
    Typical Analysis
    (Ave. values %) 83.0 4.0 1.5 0.50 11.0

    NEAREST AS ASTM SAE


    STANDARD 95400 C95400 J461/J462

    DESCRIPTION 954 is very hard and abrasive resistant has excellent strength and wear resistance
    with reasonable machining properties. These physical properties remain good at
    elevated temperatures. General corrosion resistance is good, but under some
    circumstances may suffer dealuminifation.

    APPLICATIONS High strength bearings, Good impact resistance, Poor anti-seizure properties.

    Tensile Yield Strength Hardness


    Manufacturing Elongation
    MECHANICAL Strength 0.2% range
    Process %
    PROPERTIES MPa MPa HB
    Continuous
    586 221 12 180
    Cast
    Centrifugal
    515 205 12 170
    Cast

    Specific Gravity 7.45


    GENERAL
    PROPERTIES Compressive strength
    265 MPa
    0.1% Permanent set
    Machinability rating
    60
    Free machining brass = 100
    O
    Operating temperature, max 260 C
    O
    Stress relieve 316 C

    Round 19.05 to 152.4 mm


    SIZE RANGE
    Hollow 31.75 OD x 19.05 ID to 203.2 OD x 152.4 ID

    Every care has been taken in listing this information, particularly specifications. Voestalpine High performance Metals (Australia) Pty Ltd will
    not accept responsibility for any loss or other damage caused to any person or Company as a result of the use of information contained herein

    Notes

    You might also like