Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 141 views

    EF4236

    Uploaded by

    Noor Rahman
    The document provides diagnostic information for a Volvo A60H regarding a gearbox ECU fault code 251 for a power supply issue. It describes 4 fault modes related to power supply voltage levels either being too high, too low, having intermittent losses, or dropping before the ignition is switched off. For each fault mode, it lists the detection conditions, possible DTCs, symptoms, possible causes, and suggested actions to check the alternator, battery, cables, and power supply connections to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EF4236

    Uploaded by

    Noor Rahman
    141 views2 pages
    The document provides diagnostic information for a Volvo A60H regarding a gearbox ECU fault code 251 for a power supply issue. It describes 4 fault modes related to power supply voltage levels either being too high, too low, having intermittent losses, or dropping before the ignition is switched off. For each fault mode, it lists the detection conditions, possible DTCs, symptoms, possible causes, and suggested actions to check the alternator, battery, cables, and power supply connections to the ECU.

    Original Description:

    Description of fault code ef4236

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides diagnostic information for a Volvo A60H regarding a gearbox ECU fault code 251 for a power supply issue. It describes 4 fault modes related to power supply voltage levels either being too high, too low, having intermittent losses, or dropping before the ignition is switched off. For each fault mode, it lists the detection conditions, possible DTCs, symptoms, possible causes, and suggested actions to check the alternator, battery, cables, and power supply connections to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    141 views2 pages

    EF4236

    Uploaded by

    Noor Rahman
    The document provides diagnostic information for a Volvo A60H regarding a gearbox ECU fault code 251 for a power supply issue. It describes 4 fault modes related to power supply voltage levels either being too high, too low, having intermittent losses, or dropping before the ignition is switched off. For each fault mode, it lists the detection conditions, possible DTCs, symptoms, possible causes, and suggested actions to check the alternator, battery, cables, and power supply connections to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Volvo Guided Diagnostics

    Date: Information Type:


    25-Jan-23 Diagnostics Fault Codes 130: Gearbox ECU 251: Power supply
    Profile:
    A60H Volvo

    MID130 SID251 / EF4236


    Showing Selected Profile

    Valid for serial numbers


    Model Production site Serial number start Serial number stop
    A60H Volvo

    SAE code
    MID/Control Unit MID130 Gearbox ECU
    PID/PPID/SID/PSID SID251 Power supply
    Machine display message
    Text presentation EF4236

    Reference Transmission, description

    Fault mode diagnosis

    Fault mode Detection conditions:The transmission control unit (T-ECU) registers: Intermittent
    FMI 2 powerloss while engine is running. (T-ECU 10/70)
    DTC: P0884
    Symptom: Possible causes:

    ¡ Machine does not shift gears ¡ Bad voltage feed or ground


    connection to the ECU
    ¡ Intermittent contact

    Action Ground connection and voltage feed, check


    Power supply T-ECU, description and measuring
    Wiring diagram WD404

    Fault mode Detection conditions:The transmission control unit (T-ECU) registers: that the voltage is
    FMI 3 above 32 V while engine is running (T-ECU 10/70)
    DTC: P0883
    Symptom: Possible causes:

    ¡ Machine does not shift gears ¡ Defective alternator


    ¡ Open circuit on battery ground
    ¡ Battery charger & jump start

    Action Alternator, checking charging voltage

    Fault mode Detection conditions:The transmission control unit (T-ECU) registers: that the voltage is
    FMI 4 below 9 V for 30 seconds while engine is running. (T-ECU 10/70)
    DTC: P0882
    Symptom: Possible causes:

    ¡ Machine does not shift gears ¡ Defective alternator


    ¡ Critical bus communication failure ¡ Defective battery, battery cables
    ¡ Loose connection
    ¡ Bad voltage feed or ground
    connection to the ECU

    Action Alternator, checking charging voltage

    Fault mode Detection conditions:The transmission control unit (T-ECU) registers: abnormal shut down
    FMI 11 of ECU Battery power feed has been lost before normal power down with key switch off (T-
    ECU 10/70)
    DTC: P0880
    Symptom: Possible causes:

    ¡ ¡ Battery connection is opened


    before switching OFF the ignition.
    ¡ Bad voltage feed or ground
    connection to the ECU

    Action Ground connection and voltage feed, check


    Power supply T-ECU, description and measuring
    Wiring diagram WD404

    Failure Mode Detection conditions:The transmission control unit (T-ECU) registers: that the voltage is
    FMI 14 below 9V for more than 5 seconds, while engine is running. Key feed (T-ECU 63)
    DTC: P0562
    Symptom: Possible causes:

    ¡ Machine does not shift gears ¡ Machine shutdown. Delayed stop


    activated
    ¡ Bad voltage feed or ground
    connection to the ECU

    Action
    ¡ Check if the function is set to activate.Delayed stop
    ¡ Ground connection and voltage feed, check
    Power supply T-ECU, description and measuring
    Wiring diagram WD404

    Guided Diagnostics

    You might also like