H E AT P U M P O U T D O O R U N I T S

ML14XP1
MERIT® Series
Single-Phase - R-410A - 60Hz
RESIDENTIAL Bulletin No. 210761
November 2020
P R O D U C T S P E C I F I C AT I O N S Supersedes June 2020

SEER up to 16.00
HSPF up to 9.00
1.5 to 5 Tons
Cooling Capacity - 18,000 to 59,000 Btuh
Heating Capacity - 16,600 to 60,000 Btuh
M ODEL NU MBER IDENTIF IC ATION
ML 14 X P 1 - 036 - 230 A 01
Product Tier Minor Revision Number
ML = Merit® Series
Ratings Revision Number
Nominal SEER
14 = 14 SEER Voltage
230 = 208/230V-1ph-60Hz
Refrigerant
X = R-410A Nominal Cooling Capacity
018 = 1.5 tons
024 = 2 tons
Unit Type
030 = 2.5 tons
P = Heat Pump
036 = 3 tons
042 = 3.5 tons
Cooling Stages 048 = 4 tons
1 = Single Stage Compressor 060 = 5 tons
 F EAT URE HIG HLIGHTS

1. Outdoor Coil Fan

C
2. Quantum™ Coil
H 3. Expansion Valve - Outdoor Unit
4. High Capacity Liquid Line Drier
G 5. Four-Way Reversing Valve
6. Scroll Compressor
7. Defrost Control
F 8. Heavy Gauge Steel Cabinet
D 9. Refrigerant Line Access
I R4
10A
REFPOE
WIT
H
NT
ERA OIL
RIG 3MA

J
E

CON T ENTS

Approvals And Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Controls - Order Separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Field Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installation Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Model Number Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Optional Accessories - Order Separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sound Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TXV Substitution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TXV Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 2

 AP PROVALS A ND WARRANT Y

APPROVALS
• AHRI Standard 210/240 certified
• AHRI Certified system match-ups and expanded ratings, visit www.LennoxPros.com
• ENERGY STAR® certified
• Sound rated to AHRI Standard 270-2008 test conditions
• Tested in Lennox’ Research Laboratory environmental test room
• Rated According to U.S. Department of Energy (DOE) test procedures
• Unit and components ETL, NEC and CEC bonded for grounding to meet safety standards for servicing
• ETL certified (U.S. and Canada)
• ISO 9001 Registered Manufacturing Quality System
WARRANTY
• Compressor:
• Limited five years in residential/non-residential installations
• All other covered components:
• Limited five years in residential installations
• Limited one year in non-residential installations
NOTE - Refer to Lennox Equipment Limited Warranty certificate included with unit for specific details.

FEAT URES

APPLICATIONS B Outdoor Coil Fan

• 1.5 through 5 tons • Direct drive fan
• Single phase power supply • Vertical air discharge
• Sound levels low as 76 dBA • Louvered steel top fan guard
• Vertical air discharge • Totally enclosed fan motor
• Applicable to indoor air handlers or gas furnaces with • Ball bearings
indoor add-on coils • Inherently protected
• Shipped completely factory assembled, piped and wired
C Quantum™ Coil
NOTE - When heat pumps are used with gas furnaces, a • Lennox designed and fabricated coil
dual-fuel compatible thermostat or zone control • Enhanced aluminum alloy tube/enhanced fin coil
system with dual-fuel capabilities must be used
(order separately). • Superior corrosion resistance
NOTE - Installer must set outdoor unit, connect refrigerant • Ripple-edged aluminum fins
lines and make electrical connections to complete • Aluminum tube construction
job. • Lanced fins for maximum fin surface exposure
REFRIGERATION SYSTEM • Fin collars grip tubing for maximum contact area
• Flared shoulder tubing connections
R-410A Refrigerant
• Non-chlorine, ozone friendly • Factory tested under high pressure
• Unit is factory pre-charged • Entire coil is accessible for cleaning
NOTE - Total system refrigerant charge is dependent on D Expansion Valve - Outdoor Unit
outdoor unit size, indoor unit size and refrigerant • Designed and sized for heat pump systems
line length. • Sensing bulb senses evaporator suction temperature
NOTE - Refer to the unit-mounted charging sticker to during heating cycle
determine correct amount of charge required.
High Pressure Switch
• Protects the system from high pressure conditions
• Automatic reset

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 3

 F EAT URES

REFRIGERATION SYSTEM (continued) COMPRESSOR

Low Pressure Switch G Scroll Compressor
• Shuts off unit if suction pressure falls below setting • High efficiency with uniform
• Loss of charge and freeze-up protection suction flow
• Constant discharge flow, high
• Automatic reset
volumetric efficiency and quiet
E High Capacity Liquid Line Drier operation
• Factory installed in the liquid line • Low gas pulses during
• Drier traps moisture or dirt compression reduces operational
sound levels
• 100% molecular-sieve, bead type, bi-flow drier
• Compressor motor is internally
F Four-Way Reversing Valve protected from excessive current
• Rapid changeover of refrigerant flow direction from and temperature
cooling to heating and vice versa • Muffler in discharge line reduces
• Operates on pressure differential between outdoor unit operating sound levels
and indoor coil • Compressor is installed in the unit on resilient rubber
• Factory installed mounts for vibration free operation
Optional Accessories Scroll Compressor Operation
• Two involute spiral scrolls matched together generate a
Check/Expansion Valve Kits series of crescent-shaped gas pockets between them
• Field installed on certain indoor units
• During compression, one scroll remains stationary while
• See TXV Usage table the other scroll orbits around it
• Chatleff-style fitting • Gas is drawn into the outer pocket, the pocket is sealed
as the scroll rotates
Loss of Charge Switch Kit
• Protects compressor from damage from low refrigerant • As the spiral movement continues, gas pockets are
charge conditions pushed to the center of the scrolls. Volume between the
pockets is simultaneously reduced
• SPST
• When the pocket reaches the center, gas is now at high
• Normally-closed pressure and is forced out of a port located in the center
• Automatic reset of the fixed scrolls
Freezestat • During compression, several pockets are compressed
• Senses suction line temperature simultaneously resulting in a smooth continuous
compression cycle
• Cycles compressor off when suction line temperature
falls below it’s setpoint • Continuous flank contact, maintained by centrifugal
force, minimizes gas leakage and maximizes efficiency
• Opens at 29°F and closes at 58°F
• Compressor is tolerant to the effects of slugging and
• Installs on or near the discharge line of the evaporator or contaminants. If this occurs, scrolls separate, allowing
on the suction line liquid or contaminants to be worked toward the center
and discharged
Refrigerant Line Kits
• Refrigerant lines are shipped refrigeration clean Compressor Crankcase Heater (Factory installed on -036-
• Lines are cleaned, dried, pressurized and sealed at 042-048-060 models)
factory • Protects against refrigerant migration that can occur
• Suction line fully insulated during low ambient operation
• Lines are stubbed at both ends Optional Accessories
Compressor Crankcase Heater (Optional for -018-024-
030 models)
• Protects against refrigerant migration that can occur
during low ambient operation.
Compressor Sound Cover
• Reinforced vinyl compressor cover
• 1-1/2 inch thick batt of fiberglass insulation
• Hook and loop fastening tape on all open edges

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 4

 FEAT URES

CONTROLS NOTE - See the iComfort® M30 Smart Wi-Fi Thermostat

Product Specifications bulletin in the Controls
H Defrost Control section for more information.
• Time/temperature defrost control
• Defrost cycle every 30, 60 or 90 minutes of compressor Remote Outdoor Temperature Sensor
“on” time at outdoor coil temperatures below 42°F • Used with the iComfort® M30 Smart Thermostat
• Factory setting - 90 minutes • Outdoor sensor allows thermostat to
display outdoor temperature
• Anti-short cycle, timed-off control - 5 minutes
NOTE - Senor is required for high and
• Compressor delay - 30 seconds (field selectable) cycles low balance points option.
the compressor in and out of defrost mode
NOTE - Sensor is required for the
• High and low pressure switch monitoring (five-trip
Enhanced Dehumidification
lockout)
Accessory (EDA).
• Two diagnostic LEDs furnished for troubleshooting
• Conveniently located in control box Thermostat
• Thermostat is not furnished with unit
Optional Accessories • Lennox Price Book for selection
iComfort® M30 Smart Wi-Fi Thermostat
Compressor Low Ambient Cut-Off
• Wi-Fi-enabled, electronic 7-day, universal, multi-stage,
• Non-adjustable switch (low ambient cut-out)
programmable, touchscreen
thermostat • Prevents compressor operation in cooling mode when
outdoor temperature is below 35°F
• 4 Heat/2 Cool
• Auto-changeover Freezestat
• Dual-fuel control with • Senses suction line temperature
optional outdoor sensor • Cycles the compressor off if suction line temperature
• Controls dehumidification falls below setpoint
during cooling mode and • Opens at 29°F and closes at 58°F
humidification during
heating mode Compressor Hard Start Kit
• Single-phase units are equipped with a PSC compressor
• Offers enhanced capabilities including humidification / motor. This type of motor normally doesn’t need a
dehumidification / dewpoint measurement and control, potential relay and start capacitor
Humiditrol® control, and equipment maintenance
reminders • In conditions such as low voltage, this kit may be
required to increase the compressor starting torque
• Easy to read 4.3 in. color touchscreen (measured
diagonally) Indoor Blower Off Delay Relay Kit
• LCD display with backlight shows the current and set • Delays the indoor blower-off time during the cooling
temperature, time, inside relative humidity, system cycle
status (operating mode and schedules) and outside
temperature (optional outdoor sensor required) Low Ambient Kit
• Heat pump can operate in the cooling mode down to
• Smooth Setback Recovery starts system early to 45°F outdoor air temperature without additional controls
achieve setpoint at start of program period
• Allows unit to operate properly down to 30°F in the
• Compressor short-cycle protection (5 minutes) cooling mode
• Up to four separate schedules are available plus NOTE - Crankcase heater and freezestat should be
Schedule IQ™ installed on compressors equipped with a low
• One-Touch Away Mode - A quick and easy way to set the ambient kit.
cooling and heating setpoints while away
NOTE - A compressor lock-out thermostat should be
• Smart Away™ - Uses geo-fencing technology added to terminate compressor operation below
to determine when the homeowner is within a recommended operation conditions.
predetermined distance from the home to operate the
system when leaving, away and arriving Mild Weather Kit
• Wi-Fi remote monitoring and adjustment through a • Units can operate in the heating mode at outdoor air
home wireless network for desktop PCs, laptops and temperatures up to 75°F
apps for smartphones or tablets • Field installed kit allows heating operation above 75°F
• Smart home automation compatible with Amazon
Alexa®, Google Assistant and IFTTT
• Service Dashboard features online real-time monitoring
of installed iComfort® thermostats

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 5

 F EAT URES

CONTROLS (continued) J Refrigerant Line Connections, Electrical Inlets, Service

Valves
Monitor Kit - Service Light • Sweat connection vapor and liquid lines
• Ambient compensating thermistor
• Located on corner of unit cabinet
• Service light thermostat
• Fully serviceable brass service valves
• For thermostats requiring indicator light inputs
• Vapor valve can be fully shut off, while liquid valve may
Outdoor Thermostat Kit be front seated to manage refrigerant charge while
• Outdoor thermostat locks out some of the electric servicing system
heating elements on indoor units where two-stage • Refrigerant line connections and field wiring inlets are
control is applicable located in one central area of cabinet for easy access
• Outdoor thermostat maintains the heating load on low • See dimension drawing
power input as long as possible before allowing the full
power load to come on the line Optional Accessories
• Thermostat Kit and Mounting Box must be ordered Unit Stand-Off Kit
separately • Black high density polyethylene feet
I CABINET • Raises unit off mounting surface
• Heavy gauge steel cabinet • Four feet furnished per order number
• Five station metal wash process
• Louvered heavy gauge steel panels
• Powder paint finish for superior rust and corrosion
protection
• Control box conveniently located with all controls factory
wired
• Corner patch plate allows compressor access
• Drainage holes provided in base section
PermaGuard™ Unit Base
• Durable zinc-coated base section resists rust and
corrosion

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 6

S PECIFICAT IONS
General Model No. ML14XP1-018-230 ML14XP1-024-230 ML14XP1-030-230 ML14XP1-036-230
Data Nominal Tonnage 1.5 2 2.5 3
1
Sound Rating Number 76 76 76 76
Connections Liquid line o.d. - in. 3/8 3/8 3/8 3/8
(sweat) Vapor line o.d. - in. 3/4 3/4 3/4 7/8
2
Refrigerant R-410A charge furnished 6 lbs. 10 oz. 6 lbs. 2 oz. 6 lbs. 9 oz. 8 lbs. 8 oz.
Outdoor Net face area - sq. ft. Outer coil 24.5 24.5 24.5 21.0
Coil Inner coil --- --- --- 20.3
Tube diameter - in. 5/16 5/16 5/16 5/16
No. of rows 1 1 1 2
Fins per inch 22 22 22 22
Outdoor Diameter - in. 22 22 22 22
Fan No. of Blades 3 3 3 3
Motor hp 1/6 1/6 1/6 1/6
Cfm 2670 2670 2890 2870
Rpm 867 867 847 839
Watts 160 160 200 205
Shipping Data - lbs. 1 package 213 213 213 229
ELECT RICAL DATA
Line voltage data - 60 Hz - 1ph 208/230V 208/230V 208/230V 208/230V
3
Maximum overcurrent protection (MOCP) amps 20 20 25 30
4
Minimum circuit ampacity (MCA) 12.2 13.6 17.0 18.6
Compressor Rated Load Amps 9.0 10.1 12.8 14.1
Locked Rotor Amps 48 52 67.8 72.2
Power Factor 0.98 0.98 0.96 0.99
Outdoor Full Load Amps 1.0 1.0 1.0 1.0
Fan Motor Locked Rotor Amps 1.9 1.9 1.9 1.9
CONT ROLS - ORDER S EPA RATELY
iComfort® M30 Smart Wi-Fi Thermostat 15Z69 • • • •
Remote Outdoor Temperature Sensor X2658 • • • •
OPT IONAL AC C ES S ORIES - ORDER S EPAR ATELY
Compressor Crankcase Heater 93M04 • • •
Factory •
Compressor Hard Copeland 10J42 •
Start Kit LG 88M91 • • •
Compressor Sound Cover 18J42 • • • •
Compressor Low Ambient Cut-Off 45F08 • • • •
Freezestat 3/8 in. tubing 93G35 • • • •
5/8 in. tubing 50A93 • • • •
Indoor Blower Off Delay Relay 58M81 • • • •
Loss of Charge Kit 84M23 • • • •
5
Low Ambient Kit 54M89 • • • •
Mild Weather Kit 11B97 • • • •
Monitor Kit - Service Light 76F53 • • • •
Outdoor Thermostat 10Z23 • •
Thermostat Kit Mounting Box 31461 • •
Refrigerant Line L15-41-20 L15-41-40 • • •
Sets L15-41-30 L15-41-50
L15-65-30 L15-65-40 •
L15-65-50
Unit Stand-Off Kit 94J45 • • • •
NOTE - Extremes of operating range are plus 10% and minus 5% of line voltage.
1
Sound Rating Number rated in accordance with test conditions included in AHRI Standard 270.
2
Refrigerant charge sufficient for 15 ft. length of refrigerant lines. For longer line set requirements see the Installation Instructions for information about line set length and
additional refrigerant charge required.
3
HACR type circuit breaker or fuse.
4
Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements.
5
Crankcase Heater and Freezestat are recommended with Low Ambient Kit.

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 7

S P ECIFICAT IONS
General Model No. ML14XP1-042-230 ML14XP1-048-230 ML14XP1-060-230
Data Nominal Tonnage 3.5 4 5
1
Sound Rating Number 79 80 80
Connections Liquid line o.d. - in. 3/8 3/8 3/8
(sweat) Vapor line o.d. - in. 7/8 7/8 1-1/8
2
Refrigerant R-410A charge furnished 9 lbs. 3 oz. 9 lbs. 15 oz. 11 lbs. 4 oz.
Outdoor Net face area - sq. ft. Outer coil 24.93 24.93 29.09
Coil Inner coil 24.13 24.13 28.16
Tube diameter - in. 5/16 5/16 5/16
No. of rows 2 2 2
Fins per inch 22 22 22
Outdoor Diameter - in. 22 22 22
Fan No. of Blades 4 4 4
Motor hp 1/3 1/3 1/3
Cfm 4347 4347 4500
Rpm 843 843 830
Watts 299 299 307
Shipping Data - lbs. 1 package 272 273 295
ELECT RICAL DATA
Line voltage data - 60 Hz - 1ph 208/230V 208/230V 208/230V
3
Maximum overcurrent protection (MOCP) amps 45 45 50
4
Minimum circuit ampacity (MCA) 25.8 26.2 29.6
Compressor Rated Load Amps 19.2 19.6 22.2
Locked Rotor Amps 123.9 130 127.9
Power Factor 0.99 0.99 0.99
Outdoor Full Load Amps 1.8 1.8 1.8
Fan Motor Locked Rotor Amps 2.9 2.9 2.9
CON T R OLS - ORDER S EPA RATELY
iComfort® M30 Smart Wi-Fi Thermostat 15Z69 • • •
Remote Outdoor Temperature Sensor X2658 • • •
OP T IONAL ACCES S ORIES - ORDER S EPARATELY
Compressor Hard Copeland 10J42 • •
Start Kit LG 88M91 •
Compressor Low Ambient Cut-Off 45F08 • • •
Compressor Sound Cover 18J42 • • •
Freezestat 3/8 in. tubing 93G35 • • •
5/8 in. tubing 50A93 • • •
Indoor Blower Off Delay Relay 58M81 • • •
Loss of Charge Kit 84M23 • • •
5
Low Ambient Kit 54M89 • • •
Mild Weather Kit 11B97 • • •
Monitor Kit - Service Light 76F53 • • •
Outdoor Thermostat 10Z23 • • •
Thermostat Kit Mounting Box 31461 • • •
Refrigerant Line L15-65-30 L15-65-40 • • •
Sets L15-65-50
Unit Stand-Off Kit 94J45 • • •
NOTE - Extremes of operating range are plus 10% and minus 5% of line voltage.
1
Sound Rating Number rated in accordance with test conditions included in AHRI Standard 270.
2
Refrigerant charge sufficient for 15 ft. length of refrigerant lines.
3
HACR type circuit breaker or fuse.
4
Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements.
5
Crankcase Heater and Freezestat are recommended with Low Ambient Kit.

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 8

DIM ENSIONS

4-3/8 4-3/8
INLET AIR (111) (111)

4-3/8 4-3/8
(111) (111)

OPTIONAL UNIT
INLET INLET STAND-OFF KIT (4)
(Field Installed) COMPRESSOR

AIR AIR COIL DRAIN OUTLETS

(Around perimeter of base)

6-3/8
SUCTION LINE (162) 4-3/8
CONNECTION (111)

LIQUID LINE
INLET AIR 6-3/8 4-3/8
CONNECTION
(162) (111)

TOP VIEW TOP VIEW BASE SECTION

A A
OUTDOOR DISCHARGE AIR
COIL FAN

COMPRESSOR

C B

SUCTION AND
LIQUID LINE
CONNECTION
ELECTRICAL
INLETS

2-3/4 (70)

2 (51)

3/4 (19) OPTIONAL UNIT

SIDE VIEW STANDOFF KIT (4) SIDE VIEW
(FIELD INSTALLED)

A B C
Model No.
inches mm inches mm inches mm
ML14XP1-018-230 28-1/4 718 43-1/4 1099 42-1/2 1080
ML14XP1-024-230 28-1/4 718 43-1/4 1099 42-1/2 1080
ML14XP1-030-230 28-1/4 718 43-1/4 1099 42-1/2 1080
ML14XP1-036-230 28-1/4 718 37-1/4 946 36-1/2 927
ML14XP1-042-230 32-1/4 819 37-1/4 946 36-1/2 927
ML14XP1-048-230 32-1/4 819 37-1/4 946 36-1/2 927
ML14XP1-060-230 32-1/4 819 43-1/4 1099 42-1/2 1080

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 9

S OU N D DATA
Octave Band Sound Power Levels dBA, re 10-12 Watts 1
Sound ² Estimated Sound Pressure Level at
1
Unit Center Frequency - HZ Rating Distance From Unit (dBA at distance in ft.)
Model Number
125 250 500 1000 2000 4000 8000 (dBA) 3 5 10 15 50

018 59.5 65 71 70.5 67 63 58.5 76 69 64 58 55 44

024 55 65 73.5 70 66.5 63 57 76 69 64 58 55 44
030 55.5 64.5 71 69.5 66.5 63 56.5 76 69 64 58 55 44
036 55.5 66 70.5 70.5 66.5 61.5 56 76 69 64 58 55 44
042 63 70.5 74.5 73 70 64 56 79 72 67 61 58 47
048 64 72.5 75.5 73 69.5 63.5 56 80 73 68 62 59 48
060 61.5 69 73.5 73.5 70.5 67 62 80 73 68 62 59 48
NOTE - the octave sound power data does not include tonal correction.
1
Tested according to AHRI Standard 270-2008 test conditions.
2
Estimated sound pressure level at distance based on AHRI Standard 275-2010 method for equipment located on the ground, roof, or on side of building wall with no
adjacent reflective surface within 9.8 feet. Sound pressure levels will increase based on changes to assumptions. For other applications, refer to AHRI Standard 275.

F IELD WIRING INS TALL ATIO N CLEAR ANCES

DISCONNECT See NOTES

SWITCH
(By Others)
B
OPTIONAL
A ELECTRIC
HEAT DISCONNECT
SWITCH
OPTIONAL (By Others)
OUTDOOR
THERMOSTAT
LENNOX See See
INDOOR UNIT THERMOSTAT NOTES NOTES
(Optional)
LENNOX
OUTDOOR
UNIT
D C
CONTROL
See NOTES BOX

A - Two Wire Power (see Electrical Data) NOTES:

B - Two or Three Wire Power (size to heater capacity) Service clearance of 30 in. (762 mm) must be maintained on
C - Twelve Wire Low Voltage 18 ga. minimum one of the sides adjacent to the control box.
Fourteen Wire Low Voltage with Optional Outdoor Clearance to one of the other three sides must be 36 in. (914
Thermostat mm)
D - Eight Wire Low Voltage 18 ga. minimum Clearance to one of the remaining two sides may be 12 in.
Ten Wire Low Voltage with Optional Outdoor Thermostat (305 mm) and the final side may be 6 in. (152 mm).
NOTE - Field Wiring Not Furnished A clearance of 24 in. must be maintained between two units.
All wiring must conform to NEC or CEC and local electrical 48 in. (1219 mm) clearance required on top of unit.
codes.

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 10

 T X V U SAG E TX V S U BS TI TU TIO N
Use this table for C35, CH23, CH35 and CR33 Field A general guide for replacing the factory installed TXV if
Installed TXV Match-Ups the indoor unit (coil/air handler) is larger or smaller than the
Model No. Order No. outdoor unit.

ML14XP1-018-230 12J18 Outdoor Unit Indoor Unit TXV TXV

Size Tons Size Tons Furnished Replacement
ML14XP1-024-230 12J18
ML14XP1-030-230 12J18 018 1.5 30/36 2.5/3 12J19 12J18

ML14XP1-036-230 12J19 018 1.5 36 3 12J19 12J18

ML14XP1-042-230 12J20 018 1.5 42 3.5 12J20 12J18

ML14XP1-048-230 12J20 018 1.5 48 4 12J20 12J18

ML14XP1-060-230 12J20 018 1.5 49 4 12J20 12J18

CX35 and CHX35 coils and all Lennox air handlers are shipped with a factory 018 1.5 50/60 4/5 12J20 12J18
installed TXV. In most cases, no change out of the valve is needed.
018 1.5 51/61 4/5 12J20 12J18
If a change out is required it will be listed in the “TXV SUBSTITUTIONS” table
by size. The correct TXV must be ordered separately and field installed. 018 1.5 60 5 12J20 12J18
C35 and CH35 coils - Replace the factory installed RFC orifice with the
024 2 42 3.5 12J20 12J18
expansion valve listed.
CH23 and CR33 - Use the expansion valve listed. 024 2 48 4 12J20 12J18
024 2 49 4 12J20 12J18
024 2 50/60 5 12J20 12J18
M OST POPUL A R MATC H ES 024 2 51/61 5 12J20 12J18
Outdoor Unit Indoor Unit
024 2 60 5 12J20 12J18
Model No. Model No
030 2.5 42 3.5 12J20 12J18
ML14XP1-018-230 CBA25UH-018
030 2.5 43 3.5 12J20 12J18
ML14XP1-024-230 CBA25UH-024
030 2.5 48 4 12J20 12J18
ML14XP1-030-230 CBA25UH-030
030 2.5 49 4 12J20 12J18
ML14XP1-036-230 CBA25UH-036
036 3 24 2 12J18 12J19
ML14XP1-042-230 CBA25UH-042
036 3 30 2.5 12J18 12J19
ML14XP1-048-230 CBA25UH-048
042 3.5 24 2 12J18 12J20
ML14XP1-060-230 CBA25UH-060
042 3.5 30 2.5 12J18 12J20
042 3.5 30/36 3 12J19 12J20
AHRI STAND ARD 210/240 042 3.5 36 3 12J19 12J20
048 4 30/36 2.5/3 12J19 12J20
Cooling or heating capacities are net values, including
the effects of blower motor heat, and do not include 048 4 36 3 12J19 12J20
supplementary heat. Power input is the total power input TXV Ranges:
to the compressor(s) and fan(s), plus any controls and 12J18 - 1
 .5 to 2.5 ton systems - Use on 2.5 ton (030) and
other items required as part of the system for normal lower systems.
operation.
12J19 - 3 ton systems - Use down to 2 ton (024) systems.
Units which do not have an indoor air-circulating blower 12J20 - 3
 .5 to 5 ton systems - Use down to 3 ton (036)
furnished as part of the model, i.e., split system with systems.
indoor coil only, is established by subtracting from the
total cooling capacity 1250 Btu/h per 1,000 cfm, and by
adding the same amount to the heating capacity. Total
power input for both heating and cooling is increased by
365 W per 1,000 cfm of indoor air circulated.

ML14XP1 - 1.5 to 5 Ton Heat Pump (Single-Phase) / Page 11

R EVISIONS
Sections Description of Change

TXV Substitution Updated.

Visit us at www.lennox.com
For the latest technical information, www.LennoxPros.com
Contact us at 1-800-4-LENNOX

NOTE - Due to Lennox’ ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability.
Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury.
Installation and service must be performed by a qualified installer and servicing agency. ©2019 Lennox Industries, Inc.