Detailed Specifications &

Technical Data

7814ANH - Belden Category 6 UTP Cable

For more information please
call
1-800-Belden1

See Put-ups and Colors

Related Documents: No.8 for

Data Twist Cables (Modified
Western Electric).pdf

Description:

24 AWG solid bare copper conductors, non-plenum, Polyolefin insulation, twisted pairs, central spline, rip cord, see color code chart (below),
LSNH jacket.
SUITABLE APPLICATIONS:
Suitable Applications Premise Horizontal Cable, Gigabit Ethernet, 100BaseTX, 100BaseVG
ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite
Video, AES/EBU, Digital Video, RS-422, 250MHz Category 6
PHYSICAL CHARACTERISTICS:
CONDUCTOR:
Number of Pairs 4
Total Number of Conductors 8
AWG 24
Stranding Solid
Conductor Material BC - Bare Copper

INSULATION:
Insulation Material PO - Polyolefin
Pair Color Code Chart:
Pair Number Insulation Color
Wire 1 Wire 2
1 Blue marking &
White with Orange White with Blue Stripe
2 Orange
Orange White with Orange Stripe
3 Green White with Green Stripe
4 Brown White with Brown Stripe
OVERALL CABLING:
Overall Cabling Fillers Central Spline

OUTER SHIELD:
Outer Shield Material Unshielded

OUTER JACKET:
Outer Jacket Material LSNH – Low Smoke Non-Halogen

Page 1 of 4
 Detailed Specifications &
Technical Data

7814ANH - Belden Category 6 UTP Cable

Outer Jacket Ripcord Yes

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter 5.8 mm

MECHNICAL CHARACTERISTICS:
Operating Temperature Range - 20℃ To + 75℃
Bulk Cable Weight 40.5 kg/km
Max. Recommended Pulling Tension 110 N
Min. Bend Radius (Install) 23.2 mm

APPLICABLE SPECIFICATION AGENCY COMPLIANCE:

APPLICABLE STANDARDS:
IEC Specification 11801 Category 6
EU RoHS Compliant (Y/N) Y
EU RoHS Compliance Date Oct 2007
TIA Specification 568-C.2 Category 6
Other Specification NEMA WC-63.1 Category 6

FLAME TEST:
IEC Flame Test 60332-1 Flammability

OTHER PROPERTIES:
Halogen Content as per IEC 60754-1 ≤ 5 mg/g
Acid Gas Emission pH as per IEC 60754-2 >4.3
Acid Gas Emission Conductivity as per IEC 60754-2 < 10 μs/mm
Smoke Density as per IEC 61034-2 ≥ 60% Light Transmittance

SUITABILITY:
Suitability – Indoor (Y/N) Y
Suitability - Outdoor (Y/N) N
Non-halogenated Y

PLENUM/NON-PLENUM:
Plenum (Y/N) N

ELECTRICAL CHARACTERISTICS:
Nom. Mutual Capacitance @ 1 KHz 5.6 nF/100m
Maximum Capacitance Unbalance 330 pF/100m
Nominal Velocity of Propagation 70 %
Maximum Delay @ 100 MHz 538 ns/100m
Maximum Delay Skew 45 ns/100m
Maximum Conductor DC Resistance @ 20 Deg.C 9.38 Ohms/100m
Nominal Conductor DC Resistance @ 20 Deg.C 7.5 Ohms/100m

Page 2 of 4
 Detailed Specifications &
Technical Data

7814ANH - Belden Category 6 UTP Cable

Maximum DCR Unbalance @ 20 Deg.C 5%
Characteristic Impedance 100 ±15 Ohms
Maximum Intended Operating Voltage 80 V RMS

ELECTRICAL CHARACTERISTICS - PREMISES:

Frequency Attenuation NEXT PSNEXT Return Loss ELFEXT PSELFEXT
(MHz) (dB/100m) (dB) (dB) (dB) (dB) (dB)
Max. Typical Min. Typical Min. Typical Min. Typical Min. Typical Min. Typical

1 2.0 1.8 74.3 95 72.3 93 20.0 35 67.8 87 64.8 82

4 3.8 3.5 65.3 92 63.3 90 23.0 36 55.8 82 52.8 75
8 5.3 5.0 60.8 90 58.8 88 24.5 36 49.7 77 46.7 69
10 6.0 5.6 59.3 90 57.3 88 25.0 33 47.8 74 44.8 67
16 7.6 7.2 56.2 83 54.2 81 25.0 34 43.7 68 40.7 63
20 8.5 8.0 54.8 80 52.8 78 25.0 33 41.8 67 38.8 61
25 9.5 9.0 53.3 76 51.3 74 24.3 33 39.8 73 36.8 61
31.25 10.7 10.0 51.9 70 49.9 68 23.6 32 37.9 64 34.9 57
62.5 15.4 14.5 47.4 68 45.4 66 21.5 31 31.9 57 28.9 49
100 19.8 18.5 44.3 65 42.3 63 20.1 30 27.8 53 24.8 47
155 25.2 24.0 41.4 68 39.4 66 18.8 31 24.0 48 21.0 41
200 29.0 26.8 39.8 65 37.8 63 18.0 22 21.8 43 18.8 38

250 32.8 30.2 38.3 60 36.3 59 17.3 23 19.8 43 16.8 36

Frequency ACR PSACR

(MHz) (dB) (dB)
Min. Typical Min. Typical
1 72.3 93.3 70.3 91.3
4 61.5 88.8 59.5 86.8
8 55.4 85.2 53.4 83.2
10 53.3 84.4 51.3 82.4
16 48.7 75.8 46.7 73.8
20 46.3 72.0 44.3 70.0
25 43.8 67.0 41.8 65.0
31.25 41.2 59.8 39.2 57.8
62.5 32.0 53.4 30.0 51.4
100 24.5 46.2 22.5 44.2
155 16.3 44.0 14.3 42.0
200 10.8 37.6 8.8 35.6
250 5.5 29.0 3.5 28.0
NOTES:
Notes Jacket sequentially marked.
Typical Values are for reference only.

Page 3 of 4
Detailed Specifications &
Technical Data

7814ANH - Belden Category 6 UTP Cable

PUT-UPS AND COLORS:

Item Description Put-Up Ship Weight (lbs.) Jacket Color
7814ANH 002A1000 4 PR #24 PO LSNH 1000ft 27.3 RED
7814ANH 003A1000 4 PR #24 PO LSNH 1000ft 27.3 ORG
7814ANH 004A1000 4 PR #24 PO LSNH 1000ft 27.3 YEL
7814ANH 005A1000 4 PR #24 PO LSNH 1000ft 27.3 GRN
7814ANH 006A1000 4 PR #24 PO LSNH 1000ft 27.3 BLU
7814ANH 007A1000 4 PR #24 PO LSNH 1000ft 27.3 VIO
7814ANH 008A1000 4 PR #24 PO LSNH 1000ft 27.3 GRY
7814ANH 010A1000 4 PR #24 PO LSNH 1000ft 27.3 BLK
7814ANH 002A305M 4 PR #24 PO LSNH 305m 27.3 RED
7814ANH 003A305M 4 PR #24 PO LSNH 305m 27.3 ORG
7814ANH 004A305M 4 PR #24 PO LSNH 305m 27.3 YEL
7814ANH 005A305M 4 PR #24 PO LSNH 305m 27.3 GRN
7814ANH 006A305M 4 PR #24 PO LSNH 305m 27.3 BLU
7814ANH 007A305M 4 PR #24 PO LSNH 305m 27.3 VIO
7814ANH 008A305M 4 PR #24 PO LSNH 305m 27.3 GRY
7814ANH 010A305M 4 PR #24 PO LSNH 305m 27.3 BLK

Revision Number: 12 Revision Date: 14-08-2018

___________________________________________________________________________________________
©Copyright 2018 Belden, Inc
All Rights Reserved.

Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and
specifications described herein are subject to error or omission and to change without notice, and the listing of such information and
specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether
express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special,
punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an
action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information
or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent
Judgment For Wire & amp; Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC,
27-Jan2003); Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's
inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR
(Directive 2003/11/EC, 6-Feb2003). The information provided in this Product Disclosure, and the identification of materials listed as
reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date
of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling,
storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be
considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible
for determining the applicability of legislation and regulations based on their individual usage of the product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by directive
93/68/EEC.

Page 4 of 4