Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Ti 19551580 83 en

    Uploaded by

    olivier.bigouret
    This document provides information on incremental encoder cables that connect NORD motor options like "IGx1P" to electronic devices. It lists part numbers for cables with lengths from 2 to 15 meters. The cable has an 8-pole M12 plug and connects the inverter to an encoder. It also specifies the cable's technical details, including its pin assignment. Only qualified electricians are allowed to install the cable due to electrical safety hazards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ti 19551580 83 en

    Uploaded by

    olivier.bigouret
    17 views2 pages
    This document provides information on incremental encoder cables that connect NORD motor options like "IGx1P" to electronic devices. It lists part numbers for cables with lengths from 2 to 15 meters. The cable has an 8-pole M12 plug and connects the inverter to an encoder. It also specifies the cable's technical details, including its pin assignment. Only qualified electricians are allowed to install the cable due to electrical safety hazards.

    Original Title

    ti_19551580_83_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on incremental encoder cables that connect NORD motor options like "IGx1P" to electronic devices. It lists part numbers for cables with lengths from 2 to 15 meters. The cable has an 8-pole M12 plug and connects the inverter to an encoder. It also specifies the cable's technical details, including its pin assignment. Only qualified electricians are allowed to install the cable due to electrical safety hazards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views2 pages

    Ti 19551580 83 en

    Uploaded by

    olivier.bigouret
    This document provides information on incremental encoder cables that connect NORD motor options like "IGx1P" to electronic devices. It lists part numbers for cables with lengths from 2 to 15 meters. The cable has an 8-pole M12 plug and connects the inverter to an encoder. It also specifies the cable's technical details, including its pin assignment. Only qualified electricians are allowed to install the cable due to electrical safety hazards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Getriebebau NORD GmbH & Co.

    KG
    Getriebebau-Nord-Straße 1 • 22941 Bargteheide, Germany • www.nord.com

    CABLE PLUG (F) M12-08 L= xxM


    Cable IG-IGx1P

    Scope of supply
    1x M12 plug (M), 8-poles, straight,
    1x Cable with 8 single wires, shielded, twisted pair

    Part number Cable length


    1955 1580 2 m
    1955 1581 5 m
    1955 1582 10 m
    1955 1583 15 m
    Incremental encoder cable for NORD option:
    “IGx1P” / “IGx1P8” with 8-poles M12 plug

    It only is allowed for qualified electricians to install and commission the module. An electrician is a person
    who, because of their technical training and experience, has sufficient knowledge relating to
    • switching on, switching off, isolating, earthing and marking power circuits and devices,
    • proper maintenance and use of protective devices in accordance with defined safety standards.

    DANGER! Danger of electric shock


    The frequency inverter continues to carry hazardous voltages for up to 5 minutes after it was switched off.
    • Work must not be carried out unless the device has been disconnected from the voltage and at least 5 minutes
    have elapsed since the mains was switched off!

    Field of use
    Incremental encoder cable connects the electronic device with the NORD motor via “IGx1P” or
    “IGx1P8” motor option. The “IGx1P” / “IGx1P8” option is equipped with 8-poles standard plug.

    Technical Information / Datasheet Kabel IG-IGx1P (OE-IG-A8F


    gerade)
    Specification of connection cable -- 1.0 3519 en
    Specification of connection cable – Kabel IG-IGx1P (OE-IG-A8F gerade)

    Female

    Inverter connection Encoder connection

    Information Fixed laying system for the cable


    This cable is only useable for stationary (not moved) installation. All values for the fixed laying system are noted
    on this data sheet. Other laying systems are not allowed with this cable type.

    Technical Data

    M12 plug Specification Cable Specification

    Contact quantity 8-poles AWM Style 20233


    Coding A – coded Jacket material PUR
    Contact type Female (F) Jacket color Grey
    Screw M12x1 Nut Outside diameter 7.2 mm (+/- 0.28)
    Construction type Straight Bending radius 10x cable diameter
    Protection (screwed) NEMA 1,3,4,6P IP68 Wire cross section 4x 2x 0.25 mm²
    Breakaway torque 0,6 Nm Wire isolation PVC
    Pollution degree 3 General information
    Operating voltage max. 60 V DC
    Cable Specification Operating current max. 2 A
    Braid shield coverage 26 AWG, braided shield Operating temperature -10 … + 80°C
    Material Tinned copper Flammability test FT1

    PIN assignment:

    PIN Female (F)


    Function Cable color Open wires Schematic diagram
    electronic

    GND 0V White Wire end sleeve 1

    +Ub Brown Wire end sleeve 2

    Spur „A“ Green Wire end sleeve 3

    Spur „A \“ Yellow Wire end sleeve 4

    Spur „B“ Grey Wire end sleeve 5

    Spur „B \“ Pink Wire end sleeve 6

    Spur „0“ Blue Wire end sleeve 7

    Spur „0 \“ Red Wire end sleeve 8

    2/2 -- - 3519

    You might also like