CERAGON TRAINING PROGRAMS 2011

Table of Contents

1.0 1.1 2.0 3.0 3.1 4.0

About Ceragon About our Training Solutions Training Guidelines Instructor-Led Courses (ILT) ILT Course Scope Ceragon Training Programs 2011

2 3 5 6 7 14

Ceragon offers a comprehensive training suite covering its award winning broadband wireless access and backhaul solutions. Ceragon training programs include certification, product familiarization and product overview courses.

1.0 About Ceragon

Ceragon Networks Ltd. (NASDAQ: CRNT) is a leading provider of high capacity LTE/4G-ready wireless backhaul solutions that enable cellular operators and other wireless service providers to deliver voice and data services, enabling smart-phone applications such as Internet browsing, music and video. With unmatched technology and cost innovation, Ceragons advanced point-to-point microwave systems allow wireless service providers to evolve their networks from circuit-switched and hybrid concepts to all IP networks. Ceragon solutions are designed to support all wireless access technologies, delivering more capacity over longer distances under any given deployment scenario. Ceragons solutions are deployed by more than 200 service providers of all sizes, and hundreds of private networks in more than 130 countries. Visit Ceragon at www.ceragon.com. Ceragon Networks, CeraView, FibeAir, the FibeAir design mark and Native2 are registered trademarks., and Ceragon, PolyView, ConfigAir, CeraMon, QuickAir, QuickAir Partner Program, QuickAir Partner Certification Program, QuickAir Partner Zone, EncryptAir and CeraBuild are trademarks of Ceragon Networks Ltd.

1.1 Training Solutions

Ceragon training department offers the following training modules: 1. Instructor-Led Training (ILT) 2. Web Base Seminar Training (WBST) 3. E-Learning

Instructor-Led Training
Instructor-Led training programs support every stage in the planning, installation, deployment and maintenance process with one of our expert Ceragon instructors. With advance classes the trainee can learn more of our new features imbedded in to the FibeAir product line. Allows the trainee to familiarize with the equipment by understanding the theory and applying what they have learned with hands on workshops. These include the following: o Assemble and install IDU and RFU system units o Align the RF link and perform link fine tuning and basic troubleshooting o An understanding of the operating parameters of Ceragon equipment in the context of wireless transmission of voice, video and IP data o Perform basic product configurations to ensure end to end data connectivity o Understand different application configuration topologies o Provide configuration capabilities using command line interface (CLI), Web base interface and SNMP Network Management systems After completion of the program and review process, students are required to take a written test. The test is intended as a review process and it covers the material that was presented during the class.

For more information on ILT classes contact training_na@ceragon.com.

Web Base Seminar Training (WBST)

Web base training allows students the flexibility to gain basic knowledge on specific FibeAir product lines. Provides for a cost effective way to gain additional knowledge base remotely The web-seminar is an online platform with technical lectures which, guided by our experts, allows you to receive essential information on specific topics in 30 minutes to 1 hour hour or more via your PC. Practical, targeted and efficient. The WBST is tartgeted to the follwing type of student: o o o A staff that is fully trained on certain Ceragon FibeAir product lines but requires additional information on new features. When student needs to be updated frequently on new products and features. When students require specific ways to understand, in more detail, different modules for specific FibeAir product lines such as IDU set up, RFU set up, troubleshooting set up and Management set up.

E-Learning
E-Learning allows students to enroll in a self-paced evaluation program. Programs allow students to brush up on specific processes or features. The E-Learning module is a great tool for managers, partners and subcontractors who wish to certify their staff or end users. With the E-Learning module, the student can obtain the following: o Automatic generation of a digital certificate Each program includes a certification process where enrolled users receive an automatically generated digital certificate upon successful completion of a course. Students are able to download the certificate, provided all quizzes have been completed with a passing grade of >80%. Students are given a log-in and password to access course

For more information on E-Learning courses, please contact training_na@ceragon.com

2.0 Training Guide Lines

Pricing
Ceragon training courses are priced according to Ceragon price list and location of training. Please refer to section 4 for the detailed price breakdown. Training at the customers facility excludes flights and lodging expenses.

Location
Ceragon Training Center Ceragon Networks, Inc. 10 Forest Avenue Paramus, NJ 07652

Customers Facility Training Customer is responsible for the logistic arrangements. These include the following: Overhead projector Whiteboard Ample room to conduct the class and comfortable environment

Maximum number of participants for ILT course Training courses are limited to no more than 10 students. Larger sessions require Ceragon confirmation.

Scheduling an ILT course Ceragon requires at 3 weeks advance notice for any type of course.

Course Contents All training programs include theoretical and hands on sessions. Duration and scope depend on course type. Course handbooks are provided for all students.

Evaluation Upon completion of course, participants are given an evaluation form. After completion of course, student will be given a written multiple choice examination based on the information taught in the course. Exams will be evaluated and graded by Ceragon. Students that pass the exam will receive via mail a CCSA certificate. Students that fail the test will receive via mail a certificate stating they attended the course.

3.0 Instructor-Led Training courses (ILT)

Ceragon offers the following training programs for different product lines, levels and tasks.

Description
IP-10/IP10G Basic Operation, Maintenance and Lab Workshops IP10/IP-10G Advance operation, Nodal System Configuration & Advance Lab Workshops 1500R Basic Operation, Maintenance and Lab Workshops 1500P/IP-MAX Basic Operation, maintenance and lab workshops 3200T Advance Operation, Maintenance and Lab Workshops NMS (PV/CV/EMS) CeraView/EMS/IP-10/1500R/3200T Comprehensive Product Line Course

Duration [days]
2 3 2 2 4 1 5

Courses can be given at the Ceragon Training Center located in Paramus, NJ or at the customers facility. For a detailed syllabus please refer to the next section.

3.1 Course Scope

SR-0123-0/SR-0124-0 IP10/IP10G Basic Operation and Maintenance

Product: Target Audience: Prerequisites: Duration: Course Objectives:

FibeAir IP-10/IP10G IDU Installation, commissioning, 1 line maintenance Basic understanding of microwave and IP L2 networking 2 days To provide the student knowledge and practical experience in the installation, st configuration, commissioning and maintaining (1 line) of Ceragon IP-10 equipment IDU System Overview RFU System Overview Installation Commissioning Management Configuration System Configuration Troubleshooting Tools
st

Course Scope:

Provided Material:

Course Handbook (hardcopy) Equipment for workshops CD With Software Tools (Inc. Latest SW Versions) Certificate

SR-0125-0/SR-0126-0 IP10/IP10G Advanced Operation and Maintenance

Product: Target Audience: Prerequisites: Duration: Course Objectives:

FibeAir IP10/ IP-10G IDU Installation, commissioning and maintenance (1 line and 2 ) Basic understanding of microwave and IP L2 networking 3 days To provide the student high-level knowledge and practical experience to install, st nd configure, commission and maintain (1 and 2 line) Ceragon IP-10G systems in its different configurations Technology Comprehensive Overview (ETH, 802.1p/q) System Architecture Overview RFU System Overview Installation Management System Configuration Advanced System Configuration Advanced Troubleshooting Tools Advanced Practical Exercises
st nd

Course Scope:

Provided Material:

Course Handbook (hardcopy) Equipment for workshops CD With Software Tools (Inc. Latest SW Versions) Certificate

SR-0129-0/SR-0130-0 1500R Basic Operation and Maintenance

Product: Target Audience: Prerequisites: Duration: Course Objectives:

FibeAir 1500R IDU Installation, commissioning, 1 line maintenance Basic understanding of microwave and SDH 2 days To provide the student knowledge and practical experience to install, configure, st commission and maintain (1 line) Ceragon 1500R systems Technology Overview (SDH, MW) IDU System Overview RFU System Overview Installation CeraView Element Management Software Overview CeraView Element Management Software Installation System Configuration Troubleshooting Tools
st

Course Scope:

Provided Material:

Course Handbook (hardcopy) Equipment for workshops CD With Software Tools (Inc. Latest SW Versions & CeraView) Certificate

SR-0133-0/SR-0134-0 1500P Basic Operation and Maintenance

Product: Target Audience: Prerequisites: Duration: Course Objectives:

FibeAir 1500P IP-MAX / IP-MAX^2 IDU Installation, commissioning and 1 line maintenance Basic understanding of microwave and SDH 2 days To provide the student knowledge and practical experience to install, configure, st commission and maintain (1 line) Ceragon IP-MAX / IP-MAX^2 systems Technology Overview (SDH, MW) IDU System Overview RFU System Overview Installation Overview CeraView Element Management Software Overview CeraView Element Management Software Installation System Configuration Troubleshooting Tools
st

Course Scope:

Provided Material:

Course Handbook (hardcopy) Equipment for work-shops CD With Software Tools (Inc. Latest SW Versions & CeraView) Certificate

10

SR-0137-0/SR-0138-0

3200T Advance Operation and Maintenance

Product: Target Audience: Prerequisites: Duration: Course Objectives:

FibeAir 3200T All Indoor Installation, commissioning and maintenance (1 and 2 Basic understanding of microwave and SDH 4 days To provide the student high-level knowledge and practical experience to install, st nd configure, commission and maintain (1 and 2 lines) Ceragon FibeAir 3200T systems in its different configurations Technology Comprehensive Overview (SDH, MW) System Architecture Overview RFU System Overview Installation Overview Advanced System Configuration Advanced Practical Exercises CeraView Element Management Software Overview CeraView Element Management Software Installation PolyView (NMS) Configuration Advanced Troubleshooting using the PolyView
st nd

lines)

Course Scope:

Provided Material:

Course Handbook (hardcopy) CD With Software Tools (Inc. Latest SW Versions & CeraView) Equipment for workshops Certificate

11

SR-0141-0/SR-0142-0

NMS Operation and Maintenance

Product: Target Audience: Prerequisites: Duration: Course Objectives:

PolyView+ CeraView / EMS Installation, commissioning and maintenance (1 and 2 Advance understanding of Ceragons NMS Platform 1 day To provide the student high-level knowledge and practical experience to st nd configure, commission and maintain Ceragon systems (1 and 2 lines) in its different configurations using Ceragon NMS platform Management System Overview Preliminary Configuration License Update Topology Administration Advanced Troubleshooting using Log Reports and Filtering PolyView Redundancy Configuration File Download Redundancy
st nd

lines)

Course Scope:

Provided Material:

Course Handbook (hardcopy) CD With Software Tools (Inc. Latest SW Versions, CeraView & PolyView) Certificate

12

SR-0141-0/SR-0142-0

CPLC Comprehensive Product Line Course

Product: Target Audience: Prerequisites: Duration: Course Objectives:

CeraView / EMS / IP-10 / 1500R / 3200T Installation, commissioning and maintenance (1 and 2 Basic understanding of SNMP, IP and EMS systems 5 days To provide the student high-level knowledge and practical experience to st nd configure, commission and maintain Ceragon systems (1 and 2 lines) in its different configurations using Ceragon EMS Technology Comprehensive Overview (SDH, MW, ETH) System Architecture Overview RFU System Overview Installation Overview System Configuration Practical Exercises CeraView Element Management Software Overview CeraView Element Management Software Installation EMS Overview Troubleshooting and Maintenance
st nd

lines)

Course Scope:

Provided material:

Course Handbook (hardcopy) CD With Software Tools (Inc. Latest SW Versions & CeraView) Certificate

13

4.0 Ceragon Training Programs 2011

P/N
SR-0123-0 SR-0124-0 SR-0125-0 SR-0126-0 SR-0129-0 SR-0130-0 SR-0133-0 SR-0134-0 SR-0137-0 SR-0138-0 SR-0141-0 SR-0142-0 SR-0143-0 SR-0145-0

Marketing Model
IP10BO&M@ceragon IP10BO&M@customer IP10AO&M@ceragon IP10AO&M@customer 15RBO&M@ceragon 15RBO&M@customer 15PBO&M@ceragon 15PBO&M@customer 32TEO&M@ceragon 32TEO&M@customer NO&M@ceragon NO&M@customer CPLC@ceragon CPLC@customer

Duration
2 2 3 3 2 2 2 2 4 4 1 1 5 5

Description
2 days IP-10 / IP-10G Basic 2 days IP-10 / IP-10G Basic 3 days IP-10 / IP-10G Advanced 3 days IP-10 / IP-10G Advanced 2 days 1500R Basic 2 days 1500R Basic 2 days 1500P / IP-MAX Basic 2 days 1500P / IP-MAX Basic 4 days 3200T Extended 4 days 3200T Extended 1 day NMS (PV/CV/EMS) 1 day NMS (PV/CV/EMS) 5 days IP-10,1500R,3200T 5 days IP-10,1500R,3200T

Price
$4,200 $5,100 $6,300 $7,650 $4,200 $5,100 $4,200 $5,100 $8,400 $10,200 $2,100 $2,550 $10,500 $12,750

When purchasing Ceragons training, please use the part numbers detailed above with your Purchase Order/Quotation

14