11

FAB STANDARD MECHANICAL PROPERTIES inf ey 20898: 1 of steel bolts, screws and studs tn 0 7 ope and fl alappieton The property classes and their mechanical properties apply to bos, screws and studs, with metic (ISO) thread, with nominal thread diameter d= 39° mm, made of carbon steel or alloy stel and when tested at room temperature They do nat apply to set screws and similar (ee ISO 898-5) orto specific requirements such as weldablty, corrosion resistance (see 1SO 3506 ‘on page 15-40-1 and seq), abit to withstand temperatures above + 300°C or below - 50°C (see DIN 267 Part 13 on pages 15-5-3 and 4). The designation system may be used for sizes (e.g. d> 39 mm), provided that all mechanical requirements ofthe property classes are mel Designation system of propery classes The property class symbols, indicating the most important mechanical properties, consis of two figures, one on eter side ofa dot. For example, 10. The fs figure nates 1700 of he nominal tense sent n Nitin See ne table) So property class 10.9 has a tensile strength of 10 x 100 = 1000 Nim ‘The second igure indicates 10 times the ratio between lower yield sess R, or prof tress R,,,) and nominal tensile strength R,, (yield stress ratio) So at property class 10.9 the second figure 9 = 10 x hve multpiation ofthese two figures wll gve 110 of the yield stress in Nim, so 10.x9 = 1/10 x 900 Nim? ‘3Mechanical properties of bots, screws and studs Ss 1) For cass 8.8 in diameter < 16 mm there isan Be apse) ] a pepe increased riskot ru stppingin he case finadver nef ertovertigttering muting loadin excess! pro. 7 maa ae a ingload.Relerene to [SO 8982s recommended. 4 mea ae Pe oe [ae [ee | oe Pow [me Pe oem] 2) For stucturalbotng the mt 12 mm fs fw pow [uf fom [ae fas [aw [ae fs] 3) Applies only to nominal thread diameter ae 18 om 5 = 0 ae [om [a [a |<] Min. tense properies apy o products of nial ee cc Teng > 25 Min. hardness pats o pods fl ® af'< 2 d and other produts, whch conot be = m= = fo [oe [om [oe tons ested (eg duet head conquaton. SSE 5) Sisiace hardness stall not be moce tan 30 Vickers ston ratte pois above the measured core hardness on the ae a Product when eadngs of oth Sutace and core are nia oe fared ou a HV 0 For dass 10 max surface Sarna hardness = 390 HV. lies a 5 6) Incaves where the lower yield sess R, cannot be ineiam en] we |e we | determined, iis pemissible to measur the proot a SESS Rar ome om [oo | om | 0 [ vm ‘Guide for properties at elevated temperatres sae Norn pate Sanda Fins slur 20° | +100°¢]-200°c [+2s0re ] 200°C] wnasy wom [ow | am [ow | ae [ow | wo | se | oe | oo | oe | wo vom et see z =[=>e[=lep tbe ~*l ep. rorey oma yl sess, Ry of aaa [= oss ep sess, "rear ian aanoun Sontag Wise aes = = [fe [=[®]* sa_| am [ 20 | aw [ae | ves ay — — aa_| ow | so | so | sto | amo soa ’ ” wos | oo | ais [ 100 [ves | 05 «| eon oa va_| ro [ 020 [os | ars | os 4 Marking of bolts, screws and studs “Marking ofall property classes is obligatory for hexagon bots and screws wth nomial y amet 28 in, ptercly ontop of te hea i. 1) to Ce) -Markng of ropery cases 28 higatr for hetagon socket hea cap sews with oA TT] “nominal diameter d > 5 mm, preferably on the top of the head (ig. 2). ropery “| -When tow carbon martensitic stels are used for class 10, the symbol 109 shal be awe” [ aa | 98 [109 | 129 Uundetined: 10.9. (See also page 15-10). festa Studs shale marked for property classes > 8.8 and with nominal diameter d> 5 mm. For |syet " studs with interference ft, the marking shall be at the nut end (ig. 3). Atematve ientcaon wih symbols fg 4s permissable is Left hand thread shall be marked fr nominal diameters 6 5 mm withthe symbol shown |, « in igure 5 ether on te top ofthe head or the point. ‘AtcFnaive marking, as shown in fig. 6 may be used for hexagon bots and screws. ~The trade (identification) marking ofthe manufacturer ts mandatory on all products which are marked with propery classe. 6 For other types of bots and screws the same marking system shall be used. For special 2 components marking wil be as agreed between the inetested partes, © COPYRIGHT FABORY sore] 54

11

Uploaded by

Copyright:

Available Formats

11

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

11

Uploaded by

Copyright:

Available Formats

You might also like