Product Overview

Pneumatics & Process Interfaces

894510 / 05/09 www.wolf-corporate.de

S O L E N O I D C O N T R O L VA LV E S
M A S S F LO W C O N T R O L L E R S
S O L E N O I D VA LV E S

P R O C E S S VA LV E S

MICROFLUIDICS
SENSORS
Bürkert Fluid Control Systems
Christian-Bürkert-Straße 13 -17
74653 Ingelfingen
Germany
Tel. +49 (0) 7940/10 - 0

03
Fax +49 (0) 7940/10 - 91 204
info@burkert.com
www.burkert.com 01 02 04 05 06 07
 Introduction 3

The Process Interface

Market Leader

Across thousands of individual solutions and spanning

dynamic conditions of global competition our mission is to
work towards your success.

Content
We have decades of global experience and we have always
3 Introduction been positioned at the forefront of pneumatic and process
interface technology.
4 Fascination Bürkert

7 Process Actuation
Our innovative approach to your success is to secure your
8 Process Actuation and Valve Islands process efficiency, lower your downtime, increase your safety
and boost your competitive advantage.
10 Seat Valves

12 Pilot Valves
We intend to collaborate with you where we can share our
14 Valve Block – Type 8640 pneumatic and process interface experience.

16 Valve Island – Type 8640

All of our combined knowledge is available to you through con-
18 Process Control Centers AirLINE  – Type 8644
sultation, engineering support, selection and commissioning.
20 Automation System FreeLINE – Type 8645
Everyone in our organisation is interested in listening to you
28 Automation System AirLINE Ex  – Type 8650
with the aim of presenting you with only the most appropriate
30 Cabinet Know-how
solution, fluently in your daily application language.
34 Certifications

36 Fieldbus Expertise

38 ELEMENT Interface

44 Accessories

46 System Solutions

50 Contacts at Bürkert
4 Fascination Bürkert 5

Welcome to the Fascinating Bürkert Product Program

World of Fluid Control Systems

Measurement and control: When it comes to working with fluids and gases, we are at your side – as a manufacturer of We are one of the few suppliers on the market to cover the complete control loop. Our current product range
sophisticated products, as a problem-solver with an eye for the big picture, and as a partner offering you reliable advice. extends from solenoid valves through process and analytical valves to pneumatic actuators and sensors.
Since we started in 1946, we have developed into one of the world’s leading suppliers of Fluid Control Systems. At the
same time we have kept our status as a family-owned business with a foundation of strong basic values to highlight the
way we think and act.

Experience
There are things which are not inherently yours. You have to gather them bit by bit. You receive them from others. And
you constantly have to acquire them anew. That is what makes them so valuable. Experience is one of those things.
For instance, because of our many years of experience with Pneumatics, we can provide our extensive services to you –
from consulting, development, and 3D CAD simulating to testing and after-sales service. Whether individual product
solutions or a pioneering new system for the entire control process: Benefit from our experience.

Bürkert offers a remarkable range Bürkert offers unlimited modularity Here you can find our product Here you can find our sensors,

COURAGE of servo-assisted and direct acting

solenoid valves. Read more about
for process control with angle-
seat, globe and diaphragm valves
range of pneumatic valves, valve
units and automation systems as
transmitters and controllers for
measuring and controlling flow,
them in this brochure. in the widest range of configura- well as information on our control temperature, pressure, level,
Those who only work toward optimizing things that already exist will eventually reach the limits – technically, financial- tions. cabinet building. pH/ORP and conductivity.
ly, or personally. In order to overcome these limits, courage is needed: the courage to be different and trust one’s own
ideas; the courage to venture into the unknown, searching for new ways to develop products that have never existed
before. We have this courage. By pooling and utilizing our competencies across all sectors, you benefit from our cu-
mulative knowledge of Pneumatics and Process Interfaces.

CLOSENESS
There are things we simply take for granted. Only when they are gone, do we realize how important these things really
were. This applies in particular to closeness. Without closeness, it is very difficult to build relationships and a good
understanding of one another. As an established medium-sized company, we know that. And that is why we are always
The brochure contains an over- This brochure provides technical This brochure presents our sole-
there for you. Working with you, we develop the best possible solutions for your projects in the area of Pneumatics.
view of Bürkert miniature valves background information as well noid control valves including their
Our global presence in 35 locations enables us to press ahead with technical innovations for our customers around and micro pumps, which allow for as a detailed product overview for respective features, functions and
precise and safe handling of small the mass flow controller and meter typical applications.
the world.
volumes of liquids. product range.
6 Bürkert | Pneumatics & Process Interfaces 7

Process Actuation

Pneumatic technology is known for high reliability, high force and torque generation and
cleanliness. This makes it indispensable for efficient solutions for drives and actuators for control
and regulation.

Bürkert has tamed the power of pneumatics and brings it to you in its most efficient form resulting
in new standards in factory automation and process control.

Factory Automation
Factory automation refers to computer-aided automation of production in all technical and
organizational areas of a factory. One special point of emphasis relates to automatic assembly
of subassemblies and devices. This primarily requires transport systems, material flow systems,
handling systems, robot systems and measuring systems which are connected with computer
assistance. In many cases, pneumatically operated actuators are used for this (e. g., cylinders).
These systems must smoothly interwork at high speed in the production process.

Process Control and Supervision

Bürkert has perfected practically-oriented pneumatics in an extremely wide variety of industries.
Food, chemical and pharmaceutical industries, with their complex installations, require a high level
of decentralization and conversion or expansion during operation.

Centralized or distributed control: not a question of faith in automation. Every problem is different
and requires the most efficient solution. Our solutions allow you to focus on optimum process
reliability, efficiency and economy.
8 Bürkert | Pneumatics & Process Interfaces 9

Process Actuation and

Valve Islands
The pilot valves required for controlling actuators may be fitted at various locations and in different
ways. Our range extends from directly mounted pilot valves on the actuator to centralized valve
islands with fieldbus interface in control cabinets (AirLINE and AirLINE Ex) or without control
cabinets (FreeLINE).

Pilot valves with NAMUR interfaces are among the valve types suitable for direct mounting, and are
particularly useful due to their standardized mounting flange pattern.

When using valve islands, corresponding pneumatic tubing must be installed from the control cabinet
to the final control element.

8640 8644 8645 8650

Valve Islands

5470 6518/6519 6526/6527 6524/6525 EEx-i

Valve Blocks

6012P 6014P 5470 NAMUR 6519 NAMUR 6524/6525 6526/6527

Single Pilot Valves
10 9

created by 3D Sales Technologies GmbH · info@3dst.de · www.3dst.de

Bürkert | Pneumatics & Process Interfaces

Normally Open and Normally Closed –

Seat Valve Anatomy
The ports of a seat valve are connected or disconnected by lowering or lifting a sealing element
(e. g. servopiston). These seals are hermetically tight and self-readjusting, they operate without
friction (no stick-slip effect) and are rarely subject to any dynamic stress. Seat valves are designed
to be very tight over their entire service life and the switching travels are small. The actuating forces
are pressure-dependent and relatively high; a pressure differential across the pilot valve is required
for switching.

Multi-way seat valves are available with a choice of connection thread for direct installation or
flange design for mounting directly on manifolds or actuators. Seat valves of narrow design are –
similar to spool valves – well-suited for block assembly. Several valves may be arranged in a space-
saving manner on manifolds or valve blocks with fieldbus interface. Mufflers can be connected
to reduce venting noise.

The illustrations on the opposite page show a 3/2 way seat valve using the plunger principle.
This type of valve has three ports and two valve seats, which open and close alternatively.

3D Animation Type 6014

show all solid transparent plunger movement

Type 6014 open valve close valve

play all play next stop

12 13
13

created by 3D Sales Technologies GmbH · info@3dst.de · www.3dst.de

Bürkert | Pneumatics & Process Interfaces

Pilot for Pneumatically

Operated Valves
The term “control unit for pneumatic actuators” refers to a converter function unit which is able
to issue corresponding pneumatic signals for controlling an actuator and which is controlled with
low-energy, electrical, mechanical or pneumatic signals. These control units have electrically
(magnetically), pneumatically or mechanically operated multi-way valves for switching compressed air.

These pneumatic valves can be differentiated as follows, based on the pilot system’s operating
principle:
– pivoted armature
– plunger-type valves
– rocker valves
– flipper valves

For details about these principles see our Product Overview Solenoid Valves.

The illustrations on the opposite page show the flipper valve anatomy used as a pilot for pneumatic
valves such as Type 6524 and 6525.

3D Animation Type 6144

show all solid transparent

open valve close valve

Type 6144 single valve Type 6144 block solution

play all play next stop

14 Bürkert | Pneumatics & Process Interfaces 15

Valve Block –   Type 8640

The 8640 valve block is designed to solve

diverse and complex control problems due to
its systematic modular construction. Different
valve functions can be combined on one block
without a common electrical control.

• Pneumatic
 basic modules in different
sizes
• Possibility
 to combine different valve functions
on a single valve block:
– 3/2-way valve
– 5/2-way valve
– 2x3/2-way valve
– 5/2-way valve bistable
• P
 neumatic supply: common supply – 5/3-way valve
of valves with compressed air as well
as common exhaust air lines

• Pneumatic features:
– P shut-off: replacement of valves during
operation possible
– Additional protection in your device with
check valves
16 Bürkert | Pneumatics & Process Interfaces 17

Valve Island –   Type 8640

Type 8640 is a modular automation system

with a protection class up to IP 54. The valve
island uses digital feedback inputs for the
control of sensor signals and pneumatic
outputs for the control of single and double-
acting process valves. By putting together a
row of pneumatic modules with different num-
bers of valves, 2 to 24 valve functionalities • Expansion modules for digital inputs
may be realized on one valve island. Electrical
connectivity is achieved by either fieldbus
interfaces, common connection or multipin. • Communication
 modules:

fieldbus technique
– Profibus DP
– CANopen
– DeviceNet
– Interbus
– ASI
• Digital feedback inputs
conventional wiring
– multipin
• Termination modules for electric modules – common connection

• Possibility
 to combine up to 24 valve functions
• Basic electrical modules for valves supply
on a single valve block:
– 3/2-way valve
– 5/2-way valve
• P
 neumatic basic modules in different sizes – 2x3/2-way valve
– 5/2-way valve bistable
– 5/3-way valve

• P
 neumatic supply: common supply of valves
with compressed air as well as common
• Pneumatic
 features:
exhaust air lines
– P shut-off: replacement of valves
during operation possible
– Additional protection in your device
with check valves
18 Bürkert | Pneumatics & Process Interfaces 19

Process Control Centers AirLINE

AirLINE type 8644 uses digital and analogue inputs for the control of sensor signals and uses digital
and analogue outputs for the control of complete decentralized control systems. Our expertise lies
in the supervision and control of complete loops including flow, pressure, temperature and level.

– Our groundbreaking modular systems fit in your world and in your cabinet
– Perfect process pneumatics with multiple communication possibilities

For details on AirLINE with different cooperation partners please see the AirLINE Flyers.

AirLINE Type 8644, Rockwell Point I/O System AirLINE Type 8644, Siemens ET 200S

Groundbreaking modular system in protection class Modular valve island for pneumatics with fieldbus and
IP 20 with multiple communication possibilities including digital and analogue I/O modules. This automation
ControlNet, DeviceNet, Ethernet and Profibus DP. system is open for all functionalities including hazardous
Fully compatible with Rockwell Point I/O. applications in Zone 2.

AirLINE Type 8644, WAGO I/O System 750 AirLINE Type 8644, Phoenix INLINE System

Remote Process Actuation Control System AirLINE, fully Remote Process Actuation Control System AirLINE, fully
compatible with WAGO I/O System 750. compatible with Phoenix INLINE System.
It integrates high performance solenoid pilot valves, It integrates high performance solenoid pilot valves,
remote electronic I/O and fieldbus communication into a remote electronic I/O and fieldbus communication into a
process actuation and control system that is both com- process actuation and control system that is both com-
pact and extremely flexible. Suitable for hazardous appli- pact and extremely flexible.
cations in Zone 2.
20 Bürkert | Pneumatics & Process Interfaces 21

Automation System FreeLINE – 

 Type 8645
The 8645 automation system is suitable for
solving a multitude of control tasks thanks to
its adapted, modular pneumatic and electrical
interfaces. Pneumatic and electrical modules
can be arranged in any sequence desired, and
pneumatic as well as electrical functions can
be realized on one module for the first time.

The efficient coupling of innovative valve tech-

nology with highly resistant plastic casing
enables high protection classes up to IP 67.
FreeLINE offers all the freedoms of distributed
systems without the need for control cabinets.

• Termination module

• C
 ommunication module: Profibus, DeviceNet,
• Connection bracket
CANopen, Multipin

• Pneumatic module
• C
 ombination module: digital input modules
plus several valve functions
22 Bürkert | Pneumatics & Process Interfaces Automation System FreeLINE –   Type 8645 23

Selection Criteria for Multi-Way Valves

– Final control element, single or double-acting A tube represents an additional flow resistance and a disad-
QNn value (tube size 6/4 mm, 8/6 mm)
– Circuit function of control valve vantageous volume. Thus, shortening the tube length reduces
– Flow rate/nominal diameter the volume to be filled and allows the usage of “smaller”
l/min
– Tube length control valves. Experience indicates that the flow rates can
1000
– Pilot pressure drop up to 50 % after approx. 3 – 4 m tube length and can
900 890.3
– Switching speed also drop by an additional 20 – 30 % after a further 10 m
– Operating voltage (see diagram on the right page). Consequently, the losses 800
– Installation method and location must also be taken into account when selecting the valves 700 654.05
– Port connections and when dimensioning the tubes. 600
– Ambient conditions 500 480.48
In addition, it must be ensured that lines are routed as straight
400 348.11
Actuators, circuit function as possible, with no kinks, pinching points or elbows, since 319.62
300 258.84
The required circuit function for the pilot valve results from they can impair the flow conditions, i. e. increase the flow 234.8
200 192.46 169.05 172.49
the actuator’s mode of operation (single or double-acting). losses in the tube. The diagram also clearly shows that 130.08
96.72 81.33
The options are shown in the table on page 24, along with higher flow rates are achieved by increasing the tube’s in- 100 71.91
the circuit functions for multi-way valves. Correct dimen- side diameter from 6/4 mm to 8/6 mm. 0
0.5 m 1m 2m 5m 10 m 15 m 20 m
sioning of the pilot valve, allowing for the supply line, is very
important. The diagram shows the effect of the tube lengths (6/4; Tube size 6/4 mm
8/6 mm) on the air flow rate. Similar characteristics also Tube size 8/6 mm

Selection of pilot valves (multi-way valves), result for tube sizes 10/8 and 12/10 mm. The measure-
allowing for the air capacity ments were conducted with multi-way valves at +20 °C
The pilot valve has the task of filling or venting – via a sup- and at an input pressure of 6 bar. The configurators for the
Tube
ply line – the actuator within a specific time. The shorter valve blocks and valve islands include a calculation tool for Regulator Length
the response time of the actuator, the higher the air capac- calculating flow rates. Pressure 3/2 NC valve Orifice
ity requirement of the pilot valve. The reset time of single Flow rate Flow rate Internal volume
Arches & snaps
acting actuators can be reduced by using quick exhaust However, it is difficult to give a statement about the real
valves, directly mounted on the actuator. In process auto- switching times of an actuator, connected in the end of a 2
Actuator
mation, larger actuators often need to switch slowly and tube. Further criteria influencing the switching time are the 12 Dead volume
switching times of up to half a minute are accepted. In fac- force of the spring package inside the actuator, friction 1 3 Volume
tory automation it is different and switching times often forces and possibly the media pressure. Friction
Tube
Spring force
have to be as fast as possible. Length
External forces
Orifice
Internal volume
Arches & snaps Exhaust
24 Bürkert | Pneumatics & Process Interfaces Automation System FreeLINE –   Type 8645 25

Different Multi-Way Valves

Circuit functions (WW) and possible applications of multi-way solenoid valves

WW Circuit Symbol Circuit Function Possible Applications

2 2/2-way solenoid valve, direct-acting; Opening, closing of compressed air lines
12
A normally closed;
1 switching without pressure differential

2 2/2-way solenoid valve, servo-assisted; Opening, closing of compressed air lines

A normally closed;
pressure differential required across valve
1

2 3/2-way solenoid valve, direct-acting; Pilot valve for single-acting final control elements
12 service port 2 normally vented via outlet 3; (low air capacity)
C
switching without pressure differential
1 3

2 3/2-way solenoid valve, servo-assisted; Pilot valve for single-acting final control elements
service port 2 normally vented via outlet 3 (high air capacity)
C
3
1
2 3/2-way solenoid valve, direct-acting; Pilot valve for single-acting final control elements
10
service port 2 normally pressurized; (no air capacity)
D
1 3
switching without pressure differential

2 3/2-way solenoid valve, servo-assisted; Pilot valve for single-acting final control elements
service port 2 normally pressurized; (high air capacity)
D
3 pressure differential required across valve
1
2 4 4/2-way solenoid valve, servo-assisted; Pilot valve for double-acting final control elements;
14
12 service port 2 normally pressurized and 2 and 4 are always vented via 3
G
3 service port 4 normally vented via outlet 3
1
4 2 5/2-way solenoid valve, servo-assisted; Pilot valve for double-acting final control elements;
service port 2 normally pressurized and venting 2 via 3 and 4 via 5
H Symbols for the actuating
5 3 service port 4 normally vented via outlet 5
elements on the valve:
1

4 2
5/3-way solenoid valve, servo-assisted; Pilot valve for double-acting final control elements; Solenoid actuator
Position 1: pressure on 2; 4 vented lifting, holding and lowering
L Position 2 (center): everything shut off Pilot valve
513 Position 3: pressure on 4; 2 vented
Mechanical spring
4 2 5/3-way solenoid valve, servo-assisted; Pilot valve for double-acting final control elements;
Position 1: pressure on 2; 4 vented 2 and 4 vented in center position Pneumatic return
N Position 2 (center): 2 and 4 vented
513 Position 3: pressure on 4; 2 vented
26 Bürkert | Pneumatics & Process Interfaces Automation System FreeLINE –   Type 8645 27

Process Actuation and Valve Islands

for Hazardous Areas
Bürkert provides cutting edge solutions for your hazardous location process control. An otherwise
unattainable synergy of hardworking valve elements, process actuation, sensors and networked
communication provide a true single source of remarkably attractive hazardous location systems.
We aim to provide real peace of mind, process safety and joy of use.

In the explosion proof world where certification, compactness, smart communication, and security
are everyday concerns, our wide product range provides process efficiency and higher yields by
offering you unlimited process modularity.

Details can be found in our competence brochure Hazardous Locations.

Direct-acting Pivoted Servo-assisted NAMUR Pneumatic AirLINE Automation

Systems System

6013 0780 5281 6519 6519 6518 6519 8650

EEx m II T4 EEx ed IIC T5 EEx m II T4 for hazardous areas
EEx ia IIC T5, T6 EEx ia IIC T5, T6
(Zone 1/21)
EEx m II T5 EEx m II T5

6014 5282 6524/6525

EEx m II T4 EEx ed IIC T5
EEx ia IIC T5, T6
28 Bürkert | Pneumatics & Process Interfaces 29

Automation System AirLINE Ex – 

Type 8650
AirLINE Ex Type 8650 is a modular electrical
and pneumatic automation system that con-
trols complex processes in hazardous areas
(Zone 1/21). The protection class “intrinsically
safe” (EEx-i) of electronic modules and valves
allows the change of modules during opera-
tion. Combined with the modules from our
cooperation partner Siemens, Bürkert offers
electrical, analogue and digital I/O functions
for use in Zone 0.

• E
 lectronic modules

• Interface Module
• V
 alve slice

• S
 upply slice left
• V
 alves

• Power supply module

30 Bürkert | Pneumatics & Process Interfaces 31
9

Cabinet Know-how

We have intimate knowledge of the main panel components.

We combine pneumatics, communication and networking into
simple turnkey solutions.

We strive to understand the exact needs and requirements

of our customers. We deliver according to precise project
management time scales.

We understand what is required for process cabinets

in demanding environments.

We deliver and commission complete solutions for process

environments, including hazardous locations.
32 Bürkert | Pneumatics & Process Interfaces Cabinet Know-how 33

Selection of Environment

Installation in Cabinets Installation without Additional Enclosures

Non Ex
Hazardous Locations
34 Bürkert | Pneumatics & Process Interfaces Certifications 35

Approvals Behind our Success

Individual directives and national standards have resulted in European approvals German approvals North American approvals
clear standards that have been implemented in national or The European approvals and CE mark must be considered VDE approval applies to water valves for domestic use The American Occupational Safety and Health Administra-
international law by the legislature. These recognized regu- in conjunction with one another. As products with CE where the most important requirements are electrical safety tion (OSHA) drew up the OSHA Regulation. In Standard 29
lations ensure that equipment items from different coun- marking comply with the specified safety regulations, these requirements, stipulated function behavior, water hammer, CFR, the requirement for electrical installations or equip-
tries are compatible and that manufacturers adhere to a set marked products must be accepted in all EU and EFTA tightness and mechanical strength of the fluidic components. ment stipulates that only installations or equipment which
of regulations regarding design and production. states. A distinction is made between the regulated and have been tested for the specified safety requirements
unregulated area. The CE mark on Bürkert devices refers to The KTW Recommendation is relevant to plastics in compo- by an NRTL (National Registered Test Laboratory) may be
These regulations relate to the following aspects: – Electromagnetic compatibility in the areas nents used in drinking water and is also required for the installed. The NRTLs specified include the following:
– Protection against risks and dangers – Low Voltage Directive with the following limits: use of solenoid valves with VDE approval in the drinking – Underwriters’ Laboratories (UL) for UL-listed,
– Interfaces between technical systems 75 – 1500 V for DC voltages water sector. The hygiene requirement apply to non-metallic UL-recognized, UL-classified
– Testing and inspections of products 50 – 1000 V for AC voltages materials (e. g., elastomer seal materials) which come into – Factory Mutual (FM)
– Clear description of the content and the – Pressure Equipment Directive contact with the medium and is taken as a basis for this – Canadian Standards Association (CSA)
characteristics of products recommendation in accordance with the specification of the
In regulated areas, the requirement stipulates that an competent Federal Agency. The complete CSA approval, from the measurements to
Legal supervisory authorities require that system operators independent body must conduct an CE type examination: be carried out up to preparation of the documents can be
use only equipment which meets the necessary safety re- – Pressure Equipment Directive Safety shut-off valve to EN 264 “Safety Shut-Off Devices conducted by Bürkert.
quirements pursuant to these regulations. – Gas Appliances Directive for Combustion Plants using Liquid Fuels” is specified as
– ATEX Directive the test regulation for this. A test laboratory (e. g., TÜV) Hazardous Locations
Bürkert has the largest number of valves which have been draws up a report on the requirements which include Valves for ATEX Directives (formerly Explosion-Protection
granted the corresponding global approvals. In unregulated areas, it is the manufacturer’s direct respon- functional behavior, continuous loading capability, electrical (EX) Directives) covers equipment, components and protec-
sibility to attach the CE mark. In this case, a Declaration of safety, tightness and mechanical strength of the fluidic tion systems for use in hazardous areas. It also applies to
Conformity may be required of the manufacturer, specifying components. safety facilities outside of hazardous areas if they are
the standards applied. Depending on the particular applica- required for safe operation of equipment in the hazardous
tion, the following directives may apply to Bürkert: area with respect to the risk of explosion.
– Low Voltage Directives
– Electromagnetic Compatibility Directive
– Vehicle Directives
– Medical Device Directives
36 Bürkert | Pneumatics & Process Interfaces Fieldbus Expertise 37

Intelligent Technology in the Field

The status quo: Bürkerts networking technology ELEMENT TopControl Type 8693
Application-specific standardization of systems In addition to the automation systems and valve islands, with Profibus DP and DeviceNet
As a key technology in the automation sector, fieldbus you can see on the right hand page, Bürkert offers a variety
technology now offers a range of standardized bus systems of different communication interfaces like Profibus DP,
that have been specialized and optimized for specific Profibus PA, DeviceNet, CANopen, Ethernet, Interbus,
industries or specific applications. Foundation Fieldbus or the HART protocol.

Opening up this intelligent technology with optimum Various user associations track the ongoing development of RaySENS Type 8136
efficiency for the customer is a welcome and sought-after individual bus systems. Visiting the following websites will
with HART protocol
challenge for our team of consultants who, owing to their fill you in on the latest:
pioniering experience, process the crucial knowledge for – AS-International Association
developing future-oriented solutions. And what would highly www.as-international.net
qualified engineers find more motivating than an unsolved – CANopen
problem? The fact that Bürkert has the “tickets” for the www.can-cia.de
future-oriented fieldbus technology worldwide makes the – DeviceNet
LiquidFLOW Controller Type 8719
choice simple for our customers, but “difficult” for our www.odva.org
with Profibus DP or DeviceNet
experts who wish to be challenged by new tasks. – Ethernet
www.iaona-eu.com
Catching the right bus www.ida-group.org
The “evolution” of network technology has essentially www.odva.org
developed from the principle of centralization through to www.profibus.com
distributed intelligence. Of course, this also necessitates – Foundation Fieldbus
Power I/O Box Type 8643
components that comply with all aspects of the new www.fieldbus.org
“command structure”. Maximum availability and minimum – Hart Communication Foundation with Foundation Fieldbus or Profibus PA

possible downtimes are but two key aspects of more www.hartcomm.org

efficient, i. e. advanced, operation of a system or installation – Interbus Club
which is based on future-proof fieldbus technology. It is www.interbusclub.com
certainly worth considering opting for a technology leader – Profibus International (OI)
who has been involved right from the very start and who www.profibus.com
Modular Analysis Transmitter Type 8285
can therefore provide the appropriate solution to an
indivual problem as an integrated system. With Bürkert, in combination with Types 8201 and 8221
you are riding the bus to the future.
38 Bürkert | Pneumatics & Process Interfaces ELEMENT Interface 39

Central or Decentral … You Choose.

Centralized Automation

Types 8640, 8644, 8650 in cabinets

IP 65/IP 67

Type 8645 in the wild outside the cabinet

Decentralized Automation

Types 8690, 8691, 8695 On/Off Types 8692, 8693, 8694, 8696 Continuous
40 Bürkert | Pneumatics & Process Interfaces ELEMENT Interface 41

On/Off Advantages Direct Mounted On/Off Control

for Process Valves
Mechanical
– Extremely compact integrated actuation without external air lines
– Contactless, wear-free displacement transmitter
– Simple, one button, reliable drive adaptation by automatic TEACH
calibration between parts
– ATEX Zone 2/22
– On-board air filter
– Protection against cleaning materials, external seals and integrated
control air channels
– Integrated pilot valve with manual override
– Adaptation also to classic 2000 and 2031 series valves

Communication
– Binary outputs
– AS-Interface or DeviceNET
– SuperBRIGHT visual feedback
Control Unit Control Head Control Head
Type 8690 Type 8691 Type 8695
SetUp
– Designed for simple setup in tough, agile process environments

Look and Feel

– Exceptional

Electrical Optical
Pilot Valve Communication
Feedback Feedback

– 3/2-way – Micro switches – Mechanical – AS-Interface

– 5/2-way – Inductive switches – Coloured LEDs – DeviceNet

– EEx i – A
 nalogue inductive sensor – High-Power LEDs – without
element (teachable)
42 Bürkert | Pneumatics & Process Interfaces 43

Air Advantages SuperBRIGHT LED array

feedback for On/Off
valves

Compressed air operating medium

– The compressed air operating medium is available in unlimited quantities.
Large Backlit graphical
– Many plants have their own compressed air systems/compressed air networks.
process display for con-
– The pressure range normally lies between 5 and 8 bar.
trol valves
– Compressed air is easy to transport and easily stored.
– Compressed air that is not required can be vented into the atmosphere.
– No return line for the energy-carrying medium to the compressor.
– No environmental pollution if unlubricated compressed air is used. SensorPAD touchfree

– No risk of fire or explosion. position sensing

The ELEMENT range of ControlTOPs, positioners and controllers offer four technological break-
throughs which effect the efficiency and lifetime of all the actuators it is coupled with. Innovative
thinking and acting has produced advantages which should easily find their way into solid engi-
neering specifications as they will be appreciated in the field as they will save headaches, time
and investment.

As well as the inherent good looks of the system these four points are tough to overlook.

Air is channeled internally

Control Flush Over Pressure Protection
Inside the control head is always a positive pressure controlled by a small integrated check valve.
As the pilot valve exhausts clean instrument air refreshes the environment in the head.

Integrated Pneumatic Actuation

Bürkert’s 6144 process ready pneumatic flipper valves control On/Off and positioner functions
perfectly. Bürkert specialized in making processes work. Solenoid isolation techniques formed over
many years mean our “process actuation” offers more than what is expected in simple “pneumatics”.

Integrated Air Inlet Filter

A removable mesh filter saves the valve from both installation dirt and any chance of dirty air during
normal operation.
Bürkert’s well known high
FreshAIR cycle life smooth actuation
Unlike any other actuator system, each time the actuator strokes the spring chamber is replenished
by clean instrument air.

This means
– no corrosion of the actuator springs
– no dirt inside the actuator
– no humidity transmitted into the control head through the spindle
– no biological contamination inside the actuator
44 Bürkert | Pneumatics & Process Interfaces 45

Accessories

The most important criteria for selecting the right accessories for your pneumatic system are
pressures, flow rates, materials for environmental resistance, port connection sizes, mounting
options and tube lengths.

In particular, the following accessories should be used for configuring a complete pneumatic system:
– plastic tubes (Type 1013 AF)
– mufflers (Type 1013 AJ)
– screwed fittings (Type 1013 AA)
– plug-in fittings (Type 1013 AB)
– compression fittings (Type 1013 AT)

Besides these pneumatic accessories, Bürkert offers a wide range of components such as flow
valves and shut-off valves, which are interconnected with pilot valves and process valves, to
form your pneumatic and process interface installation (see section “Selection Criteria for Multi-Way
Valves” – page 22-23).
46 Bürkert | Pneumatics & Process Interfaces System Solutions 47

Added Value Systems

Bürkert has a unique perspective

in the process control and instru- 01 02 03 04 05
mentation industry as we are the
only single brand which combines
a complete range of valves, in-
struments, pneumatic actuation,
networking and controllers from
a single source.

With our dedicated world-class

engineers and our superlative
manufacturing facilities we can
deliver systems which meet your
exact requirements.
Connect Conceive & Plan  & Specify Do & Check Complete
Your reliable Bürkert sales con-
Innovate
sultant and our system engineers
As a globally flexible, lean, focused and Your project team starts working for you: In Phase 3 the project is planned in detail. Good communication, coordination and Our work does not end with the perfect
work in concert to ask the right
innovative company we are the partner from your reliable sales consultant, A specification sheet and refined solu- documentation at all project phases delivery of components and systems. We
questions and provide the right
hardware. Transparent operations, of choice for fluid control systems in qualified industry specialists to dedicated tion concept are developed. This defines make sure that we are on the right track, offer a comprehensive program to our
up to date situation, review proce- more than 35 countries. Whether you system engineers – Bürkert puts the exactly what you expect from the system developing the right solution, to allow global clients interlinking services ranging
dure, engineering change notices, are in Stuttgart, Singapore, Chicago or necessary experts together. and what it must provide to ensure that us to quickly move on to prototyping. from maintenance and service contracts,
portals through SAP and secure Sydney, everywhere in the world, we all components meet your requirements. operator training and integrated logistics.
For the entire duration of the project they Thanks to the latest technology, we are
intranet are normal in our projects. are close to you and therefore know at
work together, combining their experi- At the end of this phase you are present- able to build a prototype made of metal Our customer service is available around
first-hand about your specific tasks
For a world class system experi- ence and clarifying all the requirements ed with a detailed product definition, a or plastic or a functional model to test the clock, offering support through inter-
and problems.
ence, insist on Bürkert people to in close cooperation with you to come production specification and precise flow for example within 24 hours. net, telephone or our qualified, experi-

be part of your next project. Following our principle of “one face to the up with a feasible draft of your solution commercial conditions and agreements. enced people at your site.
We provide you with samples; we per-
customer”, you have a competent, re- within the shortest timeframe.
Structured project management based form tests and, of course, obtain all the We aim to provide only the utmost in
liable consultant by your side at all times,
CAD-created animations or simulations, on open communication, effective co- necessary local and global approvals customer experience. Something you will
who listens to your needs and presents
combined with extended manufacturing, ordination and thorough documentation to make sure the system can go to pro- tell your friends about.
a solution in your daily application lan-
materials, tool design, construction and ensures fast and reliable results. duction.
guage … crossing conventional bounda-
assembly knowledge enable us to pro-
ries and creating synergies between From here we work in concert with one
vide a rough but firm production concept
industries in pursuit of your ideal solution. of our production facilities in Ingelfin-
for your system at an early stage.
gen, Gerabronn, Criesbach, Öhringen or
Systemhaus crews in Charlotte (USA),
Triembach according to their individual
Suzhou (China), Dresden, Ingelfingen
core manufacturing competencies.
and Dortmund are continuously in innova-
tion mode. They creatively engineer cost
effective solutions to meet difficult
process challenges for our customers.
48 Bürkert | Pneumatics & Process Interfaces 49

Most Important Ingredient … People

Perfect delivery of components and systems is one dimension in providing comprehensive solutions
for our global clients. We offer a comprehensive program of interlinking services which include:

Personal Consultation and Individual Configurations

We share our knowledge both by embedding our expertise in the product and by really listening to
your requirements with your success in mind. We are only content when your specific problem was
solved.

Everything from one Partner

We have tens of thousands of process engineering products in our program. We know exactly how
to program them, install them and combine them according to your wishes.

Customer Service around the Clock

We offer support through internet, telephone or people on the ground at your site. We are available
around the clock.

Start-up
We are always available for installation and commissioning and local staff and operator training.

Global Operations
We are close by in 35 countries in a network which guarantees the full achievement of our enter-
prise to each customer on each continent.
50 Bürkert | Pneumatics & Process Interfaces Contacts at Bürkert 51

Bürkert – Close to You

Germany
Germany
Germany North
North and and
North and South
South
South America
America
America Europe,
Europe, continued
continued
Europe, continued Europe,
Europe,
Europe, continued
continued
continued AsiaAsia
Asia Pacific,
Pacific,
Pacific, continued
continued
continued
SalesSales
CenterCenter
Argentina Finland Turkey China Japan
Sales Center
Ingelfingen
Ingelfingen Argentina
Argentina Finland
Finland TurkeyTurkey China China Japan Japan
Ingelfingen
Bürkert GmbH & Co. KG
Bürkert-Contromatic
Bürkert-Contromatic Argentina
Argentina S.A. S.A. BürkertBürkert
Oy Oy BurkertBurkert Contromatic
Contromatic Akiskan
Akiskan KontrolKontrol BurkertBurkert Contromatic
Contromatic (Suzhou),
(Suzhou), Co., Ltd.
Co., Ltd. BurkertBurkert
Ltd. Ltd.
Bürkert GmbH & Co. KG Bürkert-Contromatic Argentina S.A. Bürkert Oy Burkert Contromatic Akiskan Kontrol Burkert Contromatic (Suzhou), Co., Ltd. Burkert Ltd.
Bürkert GmbH & Co. KG UruguayUruguay
2602, 2602,
CentroCentro
UruguayUruguay
Norte, Norte, Atomitie
Atomitie 5 5 Sistemleri
Sistemleri TicaretTicaret
A.S. A.S. (System (System
House)House) Unit
Unit A5, A5, Suhong
Suhong SquareSquare Imasu Imasu moto asakusa-building
moto asakusa-building
Christian-Bürkert-Straße
Christian-Bürkert-Straße 13-17 13-17 Uruguay 2602, Centro Uruguay Norte, Atomitie 5 Sistemleri Ticaret A.S. (System House) Unit A5, Suhong Square Imasu moto asakusa-building
Christian-Bürkert-Straße 13-17 P.B. Oficina
P.B. Oficina 1, (B1643EKP)
1, (B1643EKP) Beccar,Beccar, FI-00370
FI-00370 Helsinki
Helsinki 1203/8 1203/8 Sok. No2-E
Sok. No2-E No. 81No. 81 Suhong
Suhong West Road
West Road 4-9-144-9-14 Moto Asakusa,
Moto Asakusa, Taito-ku
Taito-ku
DE-74653
DE-74653 Ingelfingen
Ingelfingen P.B. Oficina 1, (B1643EKP) Beccar, FI-00370 Helsinki 1203/8 Sok. No2-E No. 81 Suhong West Road 4-9-14 Moto Asakusa, Taito-ku
DE-74653 Ingelfingen Pcia.
Pcia. de de Buenos
Buenos Aires, ARGENTINA
Aires, ARGENTINA Tel: (0)207
Tel: +358 +358 (0)207
412 550412 550 TR-Yenisehir,
TR-Yenisehir, Izmir Izmir SIP Suzhou
SIP Suzhou P.R. China,
P.R. China, 215021 215021 Tokyo 111-0041,
Tokyo 111-0041, JAPANJAPAN
Tel:(0)7940/10-91
Tel: +49 +49 (0)7940/10-91
111 111 Pcia. de Buenos Aires, ARGENTINA Tel: +358 (0)207 412 550 TR-Yenisehir, Izmir SIP Suzhou P.R. China, 215021 Tokyo 111-0041, JAPAN
Tel: +49 (0)7940/10-91 111 Tel:(0)11-5648-6350
Tel: +54 +54 (0)11-5648-6350 Fax: (0)207
Fax: +358 +358 (0)207
412 555412 555 Tel:(0)232-459
Tel: +90 +90 (0)232-459
53 95 53 95 Tel: +86Tel:512
+866265
512 8498
6265 8498 Tel:(0)3-5827-0066
Tel: +81 +81 (0)3-5827-0066
Fax:(0)7940/10-91
Fax: +49 +49 (0)7940/10-91
448 448 Tel: +54 (0)11-5648-6350 Fax: +358 (0)207 412 555 Tel: +90 (0)232-459 53 95 Tel: +86 512 6265 8498 Tel: +81 (0)3-5827-0066
Fax: +49 (0)7940/10-91 448 Fax:(0)11-5648-6355
Fax: +54 +54 (0)11-5648-6355 E-mail:E-mail: sales.fi@burkert.com
sales.fi@burkert.com Fax:(0)232-459
Fax: +90 +90 (0)232-459
76 94 76 94 Fax: +86Fax:512
+866265
512 9337
6265 9337 Fax:(0)3-5827-0067
Fax: +81 +81 (0)3-5827-0067
E-mail:E-mail: info@buerkert.de
info@buerkert.de Fax: +54 (0)11-5648-6355 E-mail: sales.fi@burkert.com Fax: +90 (0)232-459 76 94 Fax: +86 512 6265 9337 Fax: +81 (0)3-5827-0067
E-mail: info@buerkert.de E-mail:E-mail: contacto.argentina@burkert.com
contacto.argentina@burkert.com E-mail:E-mail: burkert@superonline.com
burkert@superonline.com BurkertBurkert Contromatic
Contromatic (Shanghai),
(Shanghai), Co., Ltd.
Co., Ltd. E-mail:E-mail: info.jpn@burkert.com
info.jpn@burkert.com
E-mail: contacto.argentina@burkert.com France
France
France
E-mail: burkert@superonline.com Burkert Contromatic (Shanghai), Co., Ltd. E-mail: info.jpn@burkert.com
OsakaOsaka
SalesSales
Offices
Sales
Offices
Offices BrazilBrazil BURKERT
BURKERT CONTROMATIC
CONTROMATIC SAS SAS UnitedUnited
KingdomKingdom (logistic
(logistic and warehouse
and warehouse for BCfor BC China)
China)
(logistic and warehouse for BC China) Osaka
BerlinBerlin Brazil
Bürkert-Contromatic Brasil Ltda.
BURKERT CONTROMATIC SAS
Rue duRue du Giessen
Giessen
United
BurkertBurkert
Kingdom
Contromatic
Contromatic LimitedLimited Floor 2,Floor
block2,6,
block
1666,Mingdong
166 Mingdong
Road Road BurkertBurkert
Ltd. Ltd.
Burkert Ltd.
Berlin
Bürkert GmbH & Co. KG
Bürkert-Contromatic Brasil Ltda.
Bürkert-Contromatic Brasil Ltda. Rue du Giessen Burkert Contromatic Limited Floor 2, block 6, 166 Mingdong Road
Pudong New District 2-8-8-1103
2-8-8-1103 HigashiHigashi Nakajima,
Nakajima,
Bürkert GmbH & Co. KG Rua Américo
Rua Américo Brasiliense,
Brasiliense, 2069 2069 FR-67220
FR-67220 Triembach
Triembach au Val au Val Brimscombe
Brimscombe Port Business
Port Business Park Park Pudong New District 2-8-8-1103 Higashi Nakajima,
Bürkert GmbH & Co. KG Rua Américo Brasiliense, 2069 FR-67220 Triembach au Val Brimscombe Port Business Park Pudong New District Higashi-Yodogawa-ku
Higashi-Yodogawa-ku
Paradiesstraße
Paradiesstraße 206 b 206 b Chacara Santo Antônio Tel:(0)388-58
Tel: +33 +33 (0)388-58
91 11 91 11 Brimscombe,
Brimscombe, StroudStroud ShanghaiShanghai
201209,201209, P.R. CHINA
P.R. CHINA Higashi-Yodogawa-ku
Paradiesstraße 206 b Chacara Santo Antônio Shanghai 201209, P.R. CHINA Osaka Osaka 533-0033,
533-0033, JAPANJAPAN
DE-12526
DE-12526 Berlin Berlin Chacara Santo Antônio Tel: +33 (0)388-58 91 11 Brimscombe, Stroud Tel: +86Tel:21-5863
+86 21-5863
9990 9990
DE-12526 Berlin 04715-005
04715-005 São -Paulo
São Paulo - SP BRAZIL
SP BRAZIL Fax:(0)388-57
Fax: +33 +33 (0)388-57
20 08 20 08 Glos,2QQ
Glos, GL5 GL5/2QQ / UNITED
UNITED KINGDOM
KINGDOM Tel: +86 21-5863 9990 Osaka 533-0033, JAPAN
Tel:(0)30/679717-0
Tel: +49 +49 (0)30/679717-0 04715-005 São Paulo - SP BRAZIL Fax: +33 (0)388-57 20 08 Glos, GL5 2QQ / UNITED KINGDOM Fax: +86Fax:21-5863
+86 21-5863
9968 9968 Tel:(0)6-6320-0880
Tel: +81 +81 (0)6-6320-0880
Tel: +49 (0)30/679717-0 Tel:(0)11-2186
Tel: +55 +55 (0)11-2186
1155 1155 E-mail:E-mail: burkert.france@burkert.com
burkert.france@burkert.com Tel:(0)1453-731
Tel: +44 +44 (0)1453-731
353 353 Fax: +86 21-5863 9968 Tel: +81 (0)6-6320-0880
Fax:(0)30/679717-66
Fax: +49 +49 (0)30/679717-66 Tel: +55 (0)11-2186 1155 E-mail: burkert.france@burkert.com Tel: +44 (0)1453-731 353 E-mail:E-mail: info.chn@burkert.com
info.chn@burkert.com Fax:(0)6-6320-0881
Fax: +81 +81 (0)6-6320-0881
Fax: +49 (0)30/679717-66 Fax:(0)11-2186
Fax: +55 +55 (0)11-2186
1165 1165 Fax:(0)1453-731
Fax: +44 +44 (0)1453-731
343 343 E-mail: info.chn@burkert.com Fax: +81 (0)6-6320-0881
Hannover
Hannover Fax: +55 (0)11-2186 1165
E-mail:E-mail: pedidos.brasil@burkert.com
pedidos.brasil@burkert.com Italy Italy
Italy
Fax: +44 (0)1453-731 343
E-mail:E-mail: sales.uk@burkert.com
sales.uk@burkert.com BeijingBeijing Korea Korea
Hannover E-mail: pedidos.brasil@burkert.com BürkertBürkert Contromatic
Contromatic ItalianaItaliana
S.p.A. S.p.A. E-mail: sales.uk@burkert.com Beijing Korea
Bürkert GmbH & Co. KG
Bürkert GmbH & Co. KG Bürkert Contromatic Italiana S.p.A. BurkertBurkert Contromatic
Contromatic (Shanghai),
(Shanghai), Co., Ltd.
Co., Ltd. BurkertBurkert Contromatic
Contromatic Korea Korea Co., Ltd.
Co., Ltd.
Bürkert GmbH & Co. KG CanadaCanada CentroCentro Direzionale
Direzionale „Colombirolo“
„Colombirolo“ Burkert Contromatic (Shanghai), Co., Ltd. Burkert Contromatic Korea Co., Ltd.

Credits: © and concept: Christian Bürkert GmbH & Co. KG | Realization: WOLF, Berlin | Photography: Münch Lichtbildnerei, Stuttgart; Studio Flamisch, Düsseldorf |
Rendsburger
Rendsburger StraßeStraße
18 18 Canada Centro Direzionale „Colombirolo“ Room A Room
1708,A 1708,
LuowaLuowa Building,
Building, No.203No.203 C-401,C-401, Micro Office
Micro Office Bldg. 554-2
Bldg. 554-2
Rendsburger Straße 18
DE-30659
DE-30659 Hannover
Hannover
DE-30659 Hannover
BürkertBürkert Contromatic
Contromatic Inc. Inc.
Bürkert Contromatic Inc.
Via Roma,
Via Roma, 74
Via Roma, 74
74 Africa
Africa
Africa
Room A 1708, Luowa Building, No.203
Er Qu Lizezhongyuan,
Er Qu Lizezhongyuan, Wangjing, Wangjing,
Er Qu Lizezhongyuan, Wangjing,
C-401, Micro Office Bldg. 554-2
Gasan-Dong,
Gasan-Dong, Keumcheon-Gu
Keumcheon-Gu
Tel: +49 (0)511/90276-0
Tel: +49 (0)511/90276-0 5002 Service
5002 South South Service
Road Road IT-20060
IT-20060 Cassina
Cassina De’ Pecchi
De’ Pecchi (Mi) (Mi) Chaoyang
Chaoyang DistrictDistrict Gasan-Dong, Keumcheon-Gu
5002 South Service Road IT-20060 Cassina De’ Pecchi (Mi) Seoul 153-803,
Seoul 153-803, KOREAKOREA
Tel: +49 (0)511/90276-0
Fax:(0)511/90276-66
Fax: +49 +49 (0)511/90276-66 Burlington,
Burlington, OntarioOntario L7LCANADA
L7L 5Y7, 5Y7, CANADA Tel:02-959
Tel: +39 +39 02-959
071 071 South South
Africa
South Africa
Africa
Chaoyang District
BeijingBeijing P.R. China,
P.R. China, 100102 100102 Seoul 153-803, KOREA
Tel:(0)2-3462
+82 (0)2-3462
Fax: +49 (0)511/90276-66 Burlington, Ontario L7L 5Y7, CANADA Tel: +39 02-959 071 Beijing P.R. China, 100102 Tel: +82 5592 5592
Tel: +1Tel: +1 905-632
905-632 30 33 30 33 Fax:02-959
Fax: +39 +39 02-959
07 25107 251 BürkertBürkert Contromatic
Contromatic (Proprietary)
(Proprietary) LimitedLimited Tel:10
Tel: +86 +86
643910 9783,
6439 9783, 6439 9793
6439 9793 Tel: +82 (0)2-3462 5592
Dortmund
Dortmund Tel: +1 905-632 30 33 Fax: +39 02-959 07 251 Bürkert Contromatic (Proprietary) Limited Tel: +86 10 6439 9783, 6439 9793 Fax:(0)2-3462
Fax: +82 +82 (0)2-3462
5594 5594
Dortmund Fax: +1Fax: +1 905-632
905-632 38 33 38 33 E-mail:E-mail: info@buerkert.it
info@buerkert.it 233 Albert
233 Albert Amon Road
Amon Road Fax:10
Fax: +86 +86
643910 9612
6439 9612 Fax: +82 (0)2-3462 5594
BürkertBürkert
GmbHGmbH & Co. KG
& Co. KG Fax: +1 905-632 38 33 E-mail: info@buerkert.it 233 Albert Amon Road Fax: +86 10 6439 9612 E-mail:E-mail: info.kor@burkert.com
info.kor@burkert.com
Bürkert GmbH & Co. KG E-mail:E-mail: sales.ca@burkert.com
sales.ca@burkert.com Millennium
Millennium Business
Business Park Park E-mail: info.kor@burkert.com
Holzener
Holzener StraßeStraße
70 70
Holzener Straße 70
E-mail: sales.ca@burkert.com Netherlands
Netherlands
Netherlands
Millennium Business Park
Meadowdale,
Meadowdale, Chengdu
Chengdu
Chengdu Malaysia
Malaysia
DE-58708
DE-58708 MendenMenden USA USA BürkertBürkert Contromatic
Contromatic BV BV Meadowdale,
Germiston
Germiston BurkertBurkert Contromatic
Contromatic (Shanghai),
(Shanghai), Co., Ltd.
Co., Ltd. Malaysia
DE-58708 Menden
Tel:(0)2373/9681-0
Tel: +49 +49 (0)2373/9681-0 USA
BURKERTBURKERT CONTROMATIC
CONTROMATIC CORP.CORP.
Bürkert Contromatic BV
Computerweg
Computerweg 9 9 Germiston Burkert Contromatic (Shanghai), Co., Ltd.
B zone,B2nd
zone, 2nd floor,
floor,
BURKERT
BURKERT CONTROMATIC
CONTROMATIC SINGAPORE
SINGAPORE PTE LTD
PTE LTD
BURKERT CONTROMATIC SINGAPORE PTE LTD
Tel: +49 (0)2373/9681-0 BURKERT CONTROMATIC CORP. Computerweg 9 (Postal:(Postal: P.O.
P.O. Box Box 26260,
26260, East1462)
East Rand Rand 1462) B zone, 2nd floor, 2F-1, Tingkat
2F-1, Tingkat Kenari Kenari
6 6
Fax:(0)2373/9681-50
Fax: +49 +49 (0)2373/9681-50 2915 Whitehall
2915 Whitehall Park Suite
Park Drive, Drive,100
Suite 100 NL-3542NL-3542 DP Utrecht
DP Utrecht (Postal: P.O. Box 26260, East Rand 1462) DongFangGuangYi
DongFangGuangYi office building
office building 2F-1, Tingkat Kenari 6
Fax: +49 (0)2373/9681-50 2915 Whitehall Park Drive, Suite 100 NL-3542 DP Utrecht SOUTH SOUTH
AFRICA AFRICA DongFangGuangYi office building SungaiSungai
Ara Ara
Charlotte,
Charlotte, NC 28273
NC 28273 , USA , USA Tel:(0)346-58
Tel: +31 +31 (0)346-58
10 10 10 10 SOUTH AFRICA LongTanLongTan city industrial
city industrial zone,
zone, 2nd 2nd section,
section, Sungai Ara
Frankfurt
Frankfurt Charlotte, NC 28273 , USA Tel: +31 (0)346-58 10 10 Tel:(0)11-574
Tel: +27 +27 (0)11-574
60 00 60 00 LongTan city industrial zone, 2nd section, 1196011960
Penang, Penang, MALAYSIA
MALAYSIA
Frankfurt Tel: +1Tel: +1 704-504
704-504 44 40 44 40 Fax:(0)346-56
Fax: +31 +31 (0)346-56
37 17 37 17 Tel: +27 (0)11-574 60 00 East
East 3rd ring 3rdRd.ring Rd. 11960 Penang, MALAYSIA

3D-Drawings: 3D Sales Technologies GmbH. All people shown are employees at Bürkert. Thank you for your support (and spirit).
BürkertBürkert
GmbHGmbH & Co. KG
& Co. KG Tel: +1 704-504 44 40 Fax: +31 (0)346-56 37 17 Fax:(0)11-454
Fax: +27 +27 (0)11-454
14 77 14 77 East 3rd ring Rd. Tel:(0)4-643
Tel: +60 +60 (0)4-643
5008 5008
Bürkert GmbH & Co. KG Fax: +1Fax: +1 949-223
949-223 31 98 31 98 E-mail:E-mail: info@burkert.nl
info@burkert.nl Fax: +27 (0)11-454 14 77 Chengdu,
Chengdu, China 610051
China 610051 Tel: +60 (0)4-643 5008
Am Flugplatz
Am Flugplatz 27 27 Fax: +1 949-223 31 98 E-mail: info@burkert.nl E-mail:E-mail: sales.za@burkert.com
sales.za@burkert.com Chengdu, China 610051 Fax:(0)4-643
Fax: +60 +60 (0)4-643
7010 7010
Am Flugplatz 27 E-mail:E-mail: marketing-usa@burkert.com
marketing-usa@burkert.com E-mail: sales.za@burkert.com Tel:28
Tel: +86 +86842528 1434,
8425 1434, 8425 1435
8425 1435 Fax: +60 (0)4-643 7010
DE-63329
DE-63329 Egelsbach
Egelsbach Tel: +86 28 8425 1434, 8425 1435
DE-63329 Egelsbach
Tel:(0)6103/9414-0
Tel: +49 +49 (0)6103/9414-0
E-mail: marketing-usa@burkert.com NorwayNorway
Norway Fax: +86
Fax: +86 28 8425 156028 8425 1560 E-mail:E-mail: info.sin@burkert.com
info.sin@burkert.com
E-mail: info.sin@burkert.com
Bürkert-Contromatic
A/S A/S Fax: +86 28 8425 1560
Tel: +49 (0)6103/9414-0
Fax:(0)6103/9414-66
Fax: +49 +49 (0)6103/9414-66 Europe
Europe
Bürkert-Contromatic
Bürkert-Contromatic A/S AsiaAsia
Asia Pacific
Pacific
Pacific Guangzhou
Guangzhou
Guangzhou
New New
New Zealand
Zealand
Zealand
Fax: +49 (0)6103/9414-66
Stuttgart
Stuttgart Europe Hvamstubben
Hvamstubben 17
Hvamstubben 17
17
BurkertBurkert Contromatic
Contromatic (Shanghai),
(Shanghai), Co., Ltd.
Co., Ltd. BURKERTBURKERT CONTROMATIC
CONTROMATIC NEW ZEALAND
NEW ZEALAND
Stuttgart Austria
Austria
NO-2013NO-2013 Skjetten
Skjetten
NO-2013 Skjetten Australia
Australia
Australia
Burkert Contromatic (Shanghai), Co., Ltd.
Room 1502,
Room 1502, Tower Tower
4, Dong4, Jun
Dong Jun Plaza
Plaza LIMITED
BURKERT CONTROMATIC NEW ZEALAND
LIMITED
BürkertBürkert
GmbHGmbH & Co. KG
& Co. KG
Bürkert GmbH & Co. KG Austria
Bürkert-Contromatic
Bürkert-Contromatic G.m.b.H.
G.m.b.H.
Tel:63-84
Tel: +47 +47 63-84
44 10 44 10
Tel: +47 63-84 44 10 BURKERT
BURKERT CONTROMATIC
CONTROMATIC AUSTRALIA
AUSTRALIA PTY. PTY. Room 1502, Tower 4, Dong Jun Plaza
828 Dong
828 - 836 - 836 Feng
DongRoad
FengEast
Road East
LIMITED
44 Rennie
44 Rennie Drive Drive
Ulmer Ulmer
StraßeStraße
4 4 Bürkert-Contromatic G.m.b.H. Fax:63-84
Fax: +47 +47 63-84
44 55 44 55 BURKERT CONTROMATIC AUSTRALIA PTY. 828 - 836 Dong Feng Road East 44 Rennie Drive
Ulmer Straße 4 Diefenbachgasse
Diefenbachgasse 1-3 1-3 Fax: +47 63-84 44 55 LIMITEDLIMITED Guangzhou
Guangzhou P.R. China,
P.R. China, 510080 510080 AirportAirport Oaks, Auckland
Oaks, Auckland 2022 2022
DE-70771
DE-70771 Leinfelden-Echterdingen
Leinfelden-Echterdingen Diefenbachgasse 1-3 E-mail:E-mail: info@burkert.no
info@burkert.no LIMITED Guangzhou P.R. China, 510080 Airport Oaks, Auckland 2022
DE-70771 Leinfelden-Echterdingen AT-1150AT-1150
Wien Wien E-mail: info@burkert.no 15 Columbia
15 Columbia Way, Norwest
Way, Norwest Business
Business Park Park Tel:20
Tel: +86 +86 20 8379,
8769 8769 8379, 8767 8703
8767 8703 NEW ZEALAND
NEW ZEALAND
Tel:(0)711/45110-0
Tel: +49 +49 (0)711/45110-0 AT-1150 Wien 15 Columbia Way, Norwest Business Park Tel: +86 20 8769 8379, 8767 8703 NEW ZEALAND
Tel: +49 (0)711/45110-0 Baulkham
Baulkham Hills,2153,
Hills, NSW NSW 2153, AUSTRALIA
AUSTRALIA
Fax:(0)711/45110-66
Fax: +49 +49 (0)711/45110-66 Tel:(0)1-894
Tel: +43 +43 (0)1-894
13 33 13 33
Tel: +43 (0)1-894 13 33 PolandPoland
Poland Baulkham Hills, NSW 2153, AUSTRALIA
Tel:2+61
Tel: +61 88532 6353
8853 6353
Fax:20
Fax: +86 +86 20 87671131
87671131
Fax: +86 20 87671131
Tel:(0)9-256
Tel: +64 +64 (0)9-256
77 37 77 37
Tel: +64 (0)9-256 77 37
Fax: +49 (0)711/45110-66 Fax:(0)1-894
Fax: +43 +43 (0)1-894
13 00 13 00 Burkert-Contromatic
Burkert-Contromatic GmbHGmbH
OddzialOddzial w Polsce
w Polsce Fax:(0)9-256
Fax: +64 +64 (0)9-256
77 47 77 47
München
München Fax: +43 (0)1-894 13 00 Burkert-Contromatic GmbH Oddzial w Polsce
Tel: +61 2 8853 6353
Fax:2+61
Fax: +61 88532 6363
8853 6363 Shanghai
Shanghai Fax: +64 (0)9-256 77 47
München E-mail:E-mail: info@buerkert.at
info@buerkert.at Bernardynska
Bernardynska street
street 14 a 14 a Fax: +61 2 8853 6363 Shanghai
BurkertBurkert Contromatic
Contromatic (Shanghai),
(Shanghai), Co., Ltd.
Co., Ltd. E-mail:E-mail: sales.nz@burkert.com
sales.nz@burkert.com
BürkertBürkert
GmbHGmbH & Co. KG
& Co. KG E-mail: info@buerkert.at Bernardynska street 14 a E-mail:E-mail: sales.au@burkert.com
sales.au@burkert.com Burkert Contromatic (Shanghai), Co., Ltd. E-mail: sales.nz@burkert.com
Bürkert GmbH & Co. KG PL-02-904
PL-02-904 Warszawa
Warszawa E-mail: sales.au@burkert.com Room 501/502
Room 501/502 Xin GaiXin
NianGaiMansion
Nian Mansion
Elsenheimerstraße
Elsenheimerstraße 47 47 Belgium
Belgium PL-02-904 Warszawa Victoria
Victoria Room 501/502 Xin Gai Nian Mansion Philippines
Philippines
Philippines
Elsenheimerstraße 47
DE-80687
DE-80687 München
München Belgium
BürkertBürkert Contromatic
Contromatic NV NV
Tel:(0)22-840
Tel: +48 +48 (0)22-840
60 10 60 10
Tel: +48 (0)22-840 60 10 Victoria No.39 No.39
Wu Zhong Wu Zhong
Road Road
No.39 Wu Zhong Road BURKERT
BURKERT CONTROMATIC
CONTROMATIC PHILIPPINES,
PHILIPPINES, INC. INC.
DE-80687 München Bürkert Contromatic NV Fax:(0)22-840
Fax: +48 +48 (0)22-840
60 11 60 11 BURKERTBURKERT CONTROMATIC
CONTROMATIC AUSTRALIA
AUSTRALIA Shanghai
Shanghai P.R. China,
P.R. China, 200233 200233 BURKERT CONTROMATIC PHILIPPINES, INC.
Tel:+49
Tel:+49 (0)89/829228-0
(0)89/829228-0 Wijnegem
Wijnegem Zone 1Zone 1 “De Hoek”
“De Hoek” Fax: +48 (0)22-840 60 11 BURKERT CONTROMATIC AUSTRALIA Shanghai P.R. China, 200233 8467Service
8467 West West Service Road,
Road, Km. 14,Km. 14, Sunvalley
Sunvalley
Tel:+49 (0)89/829228-0 Wijnegem Zone 1 “De Hoek” E-mail:E-mail: buerkert@buerkert.pl
buerkert@buerkert.pl PTY. LIMITED
PTY. LIMITED Tel:21
Tel: +86 +86 21 5110
6486 6486 5110 8467 West Service Road, Km. 14, Sunvalley
Fax:(0)89/829228-50
Fax: +49 +49 (0)89/829228-50 Bijkhoevelaan
Bijkhoevelaan 3 3 E-mail: buerkert@buerkert.pl PTY. LIMITED Tel: +86 21 6486 5110 South Superhighway,
South Superhighway, Parañaque
Parañaque City, 1700
City, 1700
Fax: +49 (0)89/829228-50 Bijkhoevelaan 3 Unit 11/26-30
Unit 11/26-30 Howleys Howleys
Road Road Fax:21
Fax: +86 +86 21 4815
6487 6487 4815 South Superhighway, Parañaque City, 1700
BE-2110BE-2110 Wijnegem
Wijnegem Portugal
Portugal Unit 11/26-30 Howleys Road Fax: +86 21 6487 4815 Metro Manila,
Metro Manila, PHILIPPINES
PHILIPPINES
NottingNotting Hill Victoria
Hill Victoria 3168 3168
BE-2110 Wijnegem
Tel: +32
Tel:(0)3-325 89 00 89 00
+32 (0)3-325 Portugal
Tel: +351
Tel: 212
+351898
212275
898 275 Notting Hill Victoria 3168
Tel: 1300
Tel: 888
1300868
888 868 Suzhou
Suzhou Metro Manila, PHILIPPINES
Tel: +63
Tel:(0)2-7766071 / 7764384
+63 (0)2-7766071 / 7764384
Tel: +32 (0)3-325 89 00 Tel: +351 212 898 275 Tel: 1300 888 868 Suzhou
BurkertBurkert
Contromatic (Shanghai),
Contromatic Co., Ltd.
(Shanghai), Co., Ltd.
Tel: +63 (0)2-7766071 / 7764384
Fax: +63
Fax:(0)2-7764382
+63 (0)2-7764382
Fax: +32
Fax:(0)3-325 61 61 61 61
+32 (0)3-325 Fax: +351
Fax: 212
+351898212276
898 276 Fax: 1300
Fax: 888
1300076
888 076 Fax: +63 (0)2-7764382
Fax: +32 (0)3-325 61 61 Fax: +351 212 898 276 Fax: 1300 888 076 Burkert Contromatic (Shanghai), Co., Ltd. E-mail:E-mail:
info.rp@burkert.com
info.rp@burkert.com
E-mail:E-mail:
BC-B@burkert.com
BC-B@burkert.com E-mail:E-mail:
portugal@burkert.com
portugal@burkert.com Unit 11-12, 5th Floor,
Unit 11-12, 5th Block
Floor, A
Block A
E-mail: BC-B@burkert.com E-mail: portugal@burkert.com Queensland
Queensland Unit 11-12, 5th Floor, Block A E-mail: info.rp@burkert.com
Queensland No.5 Xinghan Street Street
No.5 Xinghan
Czech Rep. Rep.
Czech Spain Spain BURKERT CONTROMATIC
BURKERT AUSTRALIA
CONTROMATIC AUSTRALIA No.5 Xinghan Street
SIP Suzhou P.R. China,
SIP Suzhou 215021
P.R. China, 215021 Singapore
Singapore
Singapore
Czech Rep.
Bürkert-Contromatic G.m.b.H.
Bürkert-Contromatic organizacni
G.m.b.H. Spain
slozka slozka BürkertBürkert
organizacni BURKERT CONTROMATIC AUSTRALIA SIP Suzhou P.R. China, 215021 BURKERT CONTROMATIC
BURKERT SINGAPORE
CONTROMATIC PTE LTD
SINGAPORE PTE LTD
Bürkert-Contromatic G.m.b.H. organizacni slozka Contromatic S.A. S.A.
Contromatic PTY. LIMITED
PTY. LIMITED Tel: +86-512-6265 9881 9881
Tel: +86-512-6265 BURKERT CONTROMATIC SINGAPORE PTE LTD
Krenova 35
Krenova 35 Bürkert Contromatic S.A. PTY. LIMITED Tel: +86-512-6265 9881 51 Ubi51Avenue 1, #03-14
Ubi Avenue 1, #03-14
Krenova 35 Avda. Barcelona, 40
Avda. Barcelona, 40 Unit 4/43
UnitSandgate Road Road
4/43 Sandgate Fax: +86-512-6265 9882 9882
Fax: +86-512-6265 51 Ubi Avenue 1, #03-14
CZ-602 00 Brno
CZ-602 00 Brno Avda. Barcelona, 40 Unit 4/43 Sandgate Road Fax: +86-512-6265 9882 Paya Ubi
PayaIndustrial Park Park
Ubi Industrial
CZ-602 00 Brno ES-08970 Sant Joan
ES-08970 SantDespi, Barcelona
Joan Despi, Barcelona Albion Albion
Queensland 4010 4010
Queensland Paya Ubi Industrial Park
Tel: +420
Tel: 543-25 25 05 25 05
+420 543-25 ES-08970
Tel: +34
Tel:93-477
Sant Joan
79 80 79 80
+34 93-477
Despi, Barcelona Albion Queensland 4010 HongHongKongKong Singapore 408933,
Singapore SINGAPORE
408933, SINGAPORE
BurkertHong Kong
Tel: +420 543-25 Singapore 408933, SINGAPORE
Fax: +420
Fax: 543-25 25 0625
+420 543-25
05
25 06 Tel:
Fax: +34 +34
Fax:93-477
93-477 79 80
79 81 79 81
+34 93-477
Tel: 1300
Tel: 888
1300868
888 868
Tel: 1300 888 868 Contromatic
Burkert (China/HK)
Contromatic LimitedLimited
(China/HK) Tel: +65
Tel:6844
Tel:
+65 2233
+65
6844 2233
6844 2233
Fax: +420
E-mail:E-mail: 543-25
obchod@burkert.cz 25 06
obchod@burkert.cz E-mail:Fax: +34 93-477 79 81
spain@burkert.com
E-mail: spain@burkert.com Fax: 1300
Fax: 888
1300076
888 076 Unit K,Burkert
9/Floor,
Unit
Contromatic
Kwai Shun
K, 9/Floor,
(China/HK)
KwaiIndustrial
Limited
Centre
Shun Industrial Centre Fax: +65
Fax:6844
+65 3532
6844 3532
Fax: 1300 888 076
E-mail: obchod@burkert.cz E-mail: spain@burkert.com
Western Australia
Western Australia
Unit Container
No. 51-63 K, 9/Floor,Port
Kwai
No. 51-63 Container
Shun Industrial Centre
Road
Port Road E-mail:Fax: +65 6844 3532
info.sin@burkert.com
E-mail: info.sin@burkert.com
Denmark
Denmark No. 51-63 Container Port Road E-mail: info.sin@burkert.com
Denmark SwedenSweden Western Australia Kwai Chung, N.T., HONG KONG
Kwai Chung, N.T., HONG KONG
Bürkert-Contromatic A/S A/S
Bürkert-Contromatic Sweden AB AB
Bürkert-Contromatic
BURKERT CONTROMATIC
BURKERT AUSTRALIA
CONTROMATIC AUSTRALIA
BURKERT CONTROMATIC AUSTRALIA Kwai Chung, N.T., HONG KONG TaiwanTaiwan
BurkertTaiwan
Bürkert-Contromatic PTY. LIMITED
PTY. LIMITED Tel: +852
Tel: 2480
+852 1202
2480 1202
HørkærBürkert-Contromatic
24
Hørkær 24
A/S Bürkert-Contromatic AB Tel: +852 2480 1202 Contromatic
Burkert TaiwanTaiwan
Contromatic Ltd. Ltd.
Hørkær 24 Kattsundsgatan 27
Kattsundsgatan
Kattsundsgatan
27
27 Unit 8, PTY.
Unit
LIMITED
1st Floor,
8, 1st85 Reid85
Floor, Promenade
Reid Promenade Fax: +852
Fax: 2418
Fax:
+852 1945
+852
2418 1945
2418 1945 9 F, No.Burkert
932,
Contromatic
Chenggong
F, No.
Taiwan
Road,
32, Chenggong Sec. 1,Ltd.
Road, Sec. 1,
DK-2730 Herlev
DK-2730 Herlev SE-211 26 Malmö
SE-211 26 Malmö Unit 8, 1st6027
Floor, 85 Reid Promenade E-mail:E-mail:
info.hkg@burkert.com
info.hkg@burkert.com 9 F,District
No. 32, Chenggong Road, Sec. 1,
DK-2730 Herlev SE-211 26 Malmö Joondalup WA
Joondalup WA 6027 E-mail: info.hkg@burkert.com NangangNangang District
Tel: +45
Tel:44-50 75
+45 44-5000 75 00 Tel: +46
Tel:(0)40-664 51 00 51 00
+46 (0)40-664 Joondalup WA 6027 Nangang District
Tel:44-50
+45 44-50 Tel: 1300
Tel: 888
1300868 888 868
Fax: +45 75 7575
Fax: +45 44-50
00
75 75 Tel:(0)40-664
Fax: +46 +46 (0)40-664
51 0151
Fax: +46 (0)40-664
00
51 01 Tel: 1300 888 868 IndiaIndia Taipei Taipei
BurkertIndia
Fax: +45 44-50 75 75 Fax: +46 (0)40-664 51 01 Fax: 1300
Fax: 888
1300076 888 076 TAIWAN Taipei
115, R.O.C.
E-mail:E-mail:
info.dk@burkert.com
info.dk@burkert.com E-mail:E-mail:
info.se@burkert.com
info.se@burkert.com Fax: 1300 888 076 Contromatic
Burkert PVT Ltd
Contromatic PVT Ltd TAIWAN 115, R.O.C.
Burkert1st
Contromatic PVT TAIWAN 115, R.O.C.
E-mail: info.dk@burkert.com E-mail: info.se@burkert.com SouthSouth
Australia
Australia Apex Towers,
Apex Towers,Floor,
1st No. IILtd
54No.
Floor, Main
54 IIRd
Main Rd Tel: +886
Tel: (0)2-2653 7868 7868
+886 (0)2-2653
Estonia
Estonia Switzerland South Australia Apex Towers, 1st Floor, No. 54 II Main Rd Tel: +886 (0)2-2653
7968 7868
Switzerland BURKERT CONTROMATIC
BURKERT AUSTRALIA
CONTROMATIC AUSTRALIA RA Puram
RA Puram Fax: +886 (0)2-2653
Fax: +886 (0)2-2653 7968
BürkertEstonia
Oy Eesti
Bürkert Oy Eesti Switzerland
Bürkert-Contromatic AG Schweiz
Bürkert-Contromatic AG Schweiz
BURKERT CONTROMATIC AUSTRALIA
PTY. LIMITED
PTY. LIMITED ChennaiRA600Puram
028, INDIA
Chennai 600 028, INDIA
Fax: +886 (0)2-2653 7968
E-mail:E-mail:
info.rc@burkert.com
info.rc@burkert.com
Laki 11Bürkert
E 11 Oy
Laki E
Eesti Bürkert-Contromatic
Bösch Bösch
71 71
AG Schweiz PTY.House,
Innovation LIMITED
First Avenue
Innovation House, First Avenue Chennai 600 028,
Tel: +91
Tel:(0)44-4230 3456
+91 (0)44-4230
INDIA
3456
E-mail: info.rc@burkert.com
Laki Tallinn
11 E Bösch 71 Innovation House, First Avenue Tel: +91 (0)44-4230
EE-12915
EE-12915 Tallinn
EE-12915 Tallinn
CH-6331 Hünenberg
CH-6331 ZG ZG
Hünenberg Mawson Lakes Lakes
Mawson SA 5095
SA 5095 Fax: +91
Fax:(0)44-4230 3232 3456
+91 (0)44-4230 3232
CH-6331 Hünenberg Mawson Lakes SA 5095
Tel: +372
Tel: 6440
+372 698
6440 698 Tel: +41
Tel:(0)41-785 66 66 66ZG
+41 (0)41-785 66 Tel: 1300
Tel: 888
1300868
888 868 Fax: +91
E-mail:E-mail: (0)44-4230
sales.in@burkert.com 3232
sales.in@burkert.com
Tel: +372 6440 698 Tel:(0)41-785
+41 (0)41-785 Tel: 1300 888 868
Fax: +372
Fax: 6313
+372 759
6313 759 Fax: +41 66 3366
Fax: +41 (0)41-785
66
66 33 Fax: 1300
Fax: 888
1300076
888 076 E-mail: sales.in@burkert.com
E-mail:Fax: +372 6313 759
info@burkert.ee
E-mail: info@burkert.ee Fax: +41
E-mail:E-mail: (0)41-785
info.ch@buerkert.com 66 33
info.ch@buerkert.com
Fax: 1300 888 076
E-mail: info@burkert.ee E-mail: info.ch@buerkert.com
For up-to-date addresses
For up-to-date pleaseplease
addresses at www.burkert.com.
visit usvisit us at www.burkert.com.
For up-to-date addresses please visit us at www.burkert.com.