Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Ip210a Ip210

    Uploaded by

    Tudor Sasu
    This document provides information on Omega's IP210A and IP210 series current to pressure converters. The converters take an analog 4-20 mA electrical signal as input and output a proportional 3-15 psi, 3-30 psi, etc. pneumatic pressure. They use a force balance principle with a suspended coil and flapper valve to regulate air pressure. The converters have adjustable zero and span calibration, loop-powered operation, and IP65/NEMA 4 housing. They accurately control pneumatic actuators and valves with fast response times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ip210a Ip210

    Uploaded by

    Tudor Sasu
    53 views3 pages
    This document provides information on Omega's IP210A and IP210 series current to pressure converters. The converters take an analog 4-20 mA electrical signal as input and output a proportional 3-15 psi, 3-30 psi, etc. pneumatic pressure. They use a force balance principle with a suspended coil and flapper valve to regulate air pressure. The converters have adjustable zero and span calibration, loop-powered operation, and IP65/NEMA 4 housing. They accurately control pneumatic actuators and valves with fast response times.

    Original Description:

    gas boiler

    Original Title

    IP210A-IP210

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Omega's IP210A and IP210 series current to pressure converters. The converters take an analog 4-20 mA electrical signal as input and output a proportional 3-15 psi, 3-30 psi, etc. pneumatic pressure. They use a force balance principle with a suspended coil and flapper valve to regulate air pressure. The converters have adjustable zero and span calibration, loop-powered operation, and IP65/NEMA 4 housing. They accurately control pneumatic actuators and valves with fast response times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views3 pages

    Ip210a Ip210

    Uploaded by

    Tudor Sasu
    This document provides information on Omega's IP210A and IP210 series current to pressure converters. The converters take an analog 4-20 mA electrical signal as input and output a proportional 3-15 psi, 3-30 psi, etc. pneumatic pressure. They use a force balance principle with a suspended coil and flapper valve to regulate air pressure. The converters have adjustable zero and span calibration, loop-powered operation, and IP65/NEMA 4 housing. They accurately control pneumatic actuators and valves with fast response times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Current to Pressure

    (I/P) Converter
    Control Air
    3-15 to 3-120 psi

    IP210A and IP210 Series

    IP210A-X15

    U Loop Powered
    U Ideal for Pneumatic
    Control Systems
    U IP65 Sealed Case / NEMA 4 Type Enclosure
    U Zero and Span
    Adjustments for Field
    Calibration
    U Rugged Zinc-Die Cast
    Housing

    A “current to pressure” converter


    (I/P) converts an analog signal
    (4 to 20 mA) to a proportional linear
    pneumatic output (3 to 15 psig). Its IP210-X15
    purpose is to translate the analog
    output from a control system into
    a precise, repeatable pressure Both Series provide a reliable,
    value to control pneumatic actuators/ repeatable, accurate means of
    operators, pneumatic valves, converting an electrical signal
    dampers, vanes, etc. into pneumatic pressure. Its force
    Both IP210 and IP210A are balance principle is a coil suspended
    loop-powered instruments, which in a magnetic field on a flexible
    eliminates the need for an external mount. At the lower end of the coil
    power supply (except for is a flapper valve that operates Zero adjustment of the unit is made
    IP210-X120). against a precision ground nozzle to by turning a screw that regulates the
    create a backpressure on the servo distance between the flapper valve
    Principle of Operation diaphragm of a booster relay. and the air nozzle. Span adjustment
    OMEGA’s IP210 and IP210A convert is made by varying a potentiometer,
    an analog signal (4 to 20 mA) to a The input current flows in the coil which shunts input current past the
    proportional linear pneumatic output (3 and produces a force between the coil. An integral volume flow booster
    to 15 psig). Its uncomplicated design coil and the flapper valve, which provides adequate flow capacity,
    and proven electromagnetic force controls the servo pressure and the resulting in fast response time and
    balance deliver consistently high output pressure. accurate control.
    performance.

    1
    (SUPPLY PRESSURE 7 bar)
    5

    OUTLET PRESSURE (bar)


    4

    LOOP-POWERED ELECTROPNEUMATIC CONTROL 2

    0
    0 100 200 300 400 500 600
    FLOW (N/MIN)

    Dimensions: inch

    IP210A Unit (shown without female 43650A connector)

    VALVES AND REGULATORS


    L

    IP210 Unit and Flow Characteristics

    2
    IP210A and IP210 Series Specifications:
    SERIES IP210A Series IP210 Series

    MODEL NO. IP210A-X15 IP210A-X60


    IP210-X15, IP210-X30, IP210-X60, IP210-X120
    IP210A-X30 IP210A-X120
    Accuracy ±1.5% FS ±2.3% FS ±0.5% FS
    Linearity <1.0% of span <2.0% of span -
    Repeatability <0.5% of span <0.5% of span -
    Hysteresis <1.0% of span <1.0% of span -

    Supply Sensitivity ±0.15% span per 1.5 ±0.004% span per 1.0 0.025% span per % supply pressure change
    psig psig
    Max Supply Pressure 100 psi 150 psi 80 psig (for IP210-X120: 135 psi)
    3 psi above maximum 5 psi above maximum 10 psi above maximum output pressure
    Min Supply Pressure output pressure output pressure
    Air Consumption 0.1 SCFM 0.07 SCFM 0.03 SCFM
    Operating Temp -29 to 60 °C (-20 to 140 °F) -20 to 70°C (5 to 160°F)
    Pressure Port 1/4" FNPT 1/4" FNPT
    Electrical Connection DIN 43650 with screw terminals included DIN 43650 with screw terminals included
    Flow Rate 12 SCFM for 2-60 psi ; 24 SCFM > 60 psi 10 scfm ≤60 psi; 0.06 <60 psi
    Input Resistance <300 Ω <300 Ω
    Media Oil-free, Clean, Dry Air Filtered to 25 μm Oil-free, clean, Dry Air Filtered to 25 μm
    Housing NEMA 4 Type, Epoxy-painted Zinc Die Castings IP65 rated, Epoxy-Painted Zinc Die Castings

    Construction:

    VALVES AND REGULATORS


    Nitrile Diaphragms, nozzle and supply valve, integral surface mounting bracket included
    Failure Mode:
    Upon electrical failure, the signal pressure falls to bleed pressure

    To Order
    MODEL NO. INPUT RANGE OUTPUT RANGE
    IP210-X15 4 to 20 mA 3 to 15 psig
    IP210-X30 4 to 20 mA 3 to 30 psig
    IP210-X60 4 to 20 mA 3 to 60 psig
    IP210-X120 4 to 20 mA* 3 to 120 psig
    IP210A-X15
    IP210A-X30
    4 to 20 mA
    4 to 20 mA
    3 to 15 psig
    6 to 30 psig L
    IP210A-X60 4 to 20 mA 2 to 60 psig
    IP210A-X120 4 to 20 mA 3 to 120 psig

    * 3-wire system. External 24 Vdc power supply required.


    Comes complete with operator’s manual.
    Ordering Examples: IP210-X15, I/P converter, takes a 4 to 20 mA control signal and converts it into 3 to 15 psig control air.
    IP210 A-X60, I/P converter, takes a 4 to 20 mA control signal and converts it into 2 to 60 psig control air.

    You might also like