TOOL TEMP-Injection Moulding
TOOL TEMP-Injection Moulding
TOOL TEMP-Injection Moulding
Injection moulding
mould temperature regulation
Precision, increased productivity and constant quality thanks to a mould regulation with Temperature Control Units
TOOL-TEMP Temperature Control Units in field-application
Temperatures: Temperatures:
Water until 90°C, oil until 150°C Water up to 160°C
Heating capacity: Heating capacity:
3 - 18 kW 6 - 48 kW
Operational use: Operational use:
Injection moulds from 1 kg up to 1‘800 kg Processing of plastics like:
Processing of plastics like: PC, PMP, POM, PET, PA6, etc.
PS, ABS, SAN, PMMA, PPE, PP, PE, etc.
System: System:
Open system; the heat transfer medium is Closed system; the boiling point is raised to
in contact to the oxygen in the air 140°C, resp. 160°C due to the static pressure
in the system
Particularities: Particularities:
• Flow control and pressure display • Flow control and pressure display
• Vacuum mode and mould drain • Vacuum mode, pressure increase pump
• Temperature measurement at the (booster pump)
mould • Mould drain with compressed air
• Interface controller • Temperature measurement at the mould
• Several pump types • Interface controller
• Magnetic-drive pump
Temperatures: Temperatures:
Water 25°C - 90°C Oil up to 360°C
Heating capacity: Heating capacity:
3 - 144 kW 8 - 48 kW
Operational use: Operational use:
Injection moulds up to 30‘000 kg, Injection moulds up to 10‘000 kg
Consumer with large return volume Processing of plastics like:
PC, PMP, POM, PET, PA6, etc.
System: System:
Open system with high cooling capacity Closed hot oil circuit with overlaying cold oil
receiver in a large expansion tank
Particularities: Particularities:
• Flow control and pressure display • Flow control and pressure display
• Vacuum mode and mould drain • Vacuum mode and mould drain
• Temperature measurement at the • Temperature measurement at the
mould mould
• Interface controller • Interface controller
• Increased cooling capacity thanks to • Magnetic-drive pump
specific heat exchangers
TOOL-TEMP
Your Partner
TOOL-TEMP AG
Industriestrasse 30
CH-8583 Sulgen
Schweiz - Suisse - Switzerland
09/2013